Buy or Sell Your Electric Chain Hoist

HOIST CAPACITY. 1.5 TON, BRIDGE CAPACITY. 2 TON, LIFT. 26, SPEED. 25/4 FPM, SPEED. 80/20 FPM, 921 2000, EXCEL 204N20AL4308BOKO.

CAM-WOOD MHC 500 Lateral Chain FeederHeavy Duty Cross feed for Beam of 16" X 20" and up to 40 ' longs: -- Could be used at infeed or outfeed -- The feed conveyor is designed to be able to connect with any 4-sided Moulder, Multiple Blade Rip Saw, Straight Line Rip Saw and PlanerFeed rollers are pneumatically ...more

WEINIG - VALU-RIP: Infeed Conveyor System for Rip Saw -- 7-Chain Deck; spaced at: 0", 25", 54", 75", 96", 120", 147". -- (5) Board stops on Chain Deck. -- Roller Deck with: (7) Drop chains. -- (8) 50" Rollers; powered by: 2 HP Motor. -- Drop Chains spaced at: 0", 36", 54", 72", 110", 147", 181-1/2". -- Automatic Saw ...more

3' x 40′ Log trough, With kickers, Double chain, No motor drive.

Make R&M Capacity 2 T Span 19' 3" Span, 23' 11" OAL Available Lift 20' Class C Crane Headroom 21", wheel bottom to girder bottom Wheelbase 71" Overall End Truck Length 88" Year 2012 S/N HMW28732 Control Radio (to be confirmed) Electrical 460/3/60 Status Taken down Bridge Speed 80 FPM Max, VFD Bridge Power 0.5 HP x 2 ...more

Make Harrington Capacity 2 Ton Span 26' 8" Available Lift ~ 15' Class C Crane Headroom 12" Wheelbase 36" / 48" Overall End Truck Length 58" S/N 416869 Control Pendant Electrical 460/3/60 Status Taken down Bridge Speed 60 FPM Bridge Power 0.5 HP x 2 Trolley Speed 40 FPM Trolley Power 0.5 HP Hoist Speed 26 / 8.5 FPM ...more

MATH-EX CMS 16' LATERAL CHAIN FEED TABLE with the following:: -- Lateral chain feed table will feed material 1-1/2" wide min, up to 9" wide, maximum. The stock length is 12" to 16' and from 1/4" to 4-1/2" thick. -- Feed rate is variable from 50 to 600 FPM. The powered feed rollers are driven by a 3 HP ...more

Label Aire pressure sensitive labeler, Model 2111-M, serial number 6-1466108, on adjustable stand with 6" wide tabletop chain conveyor 6' long. Multi Drive DC motor control, 115 volt input, Label sizes range up to 4" in width and up to 5.50" in length. Label placement accuracy: +/- 1/32". Roll : Maximum roll ...more

Make Overhead Crane and Service Capacity 50 T Span 75' 0" Available Lift 44 ft Class C Crane Headroom 81 in Wheelbase 60" Bogey, 164" Total Overall End Truck Length 188" Total Year 1993 S/N LS10020 Control Radio Electrical 460/3/60 Status Taken down Bridge Speed 80 FPM Max, VFD Bridge Power 2 HP x 4 Trolley Speed ...more

Make Detroit Capacity 10 Tons Span 41' 6" Available Lift 29' Crane Headroom 42" Wheelbase 132" Overall End Truck Length 146" Year 1996 S/N 145563 Control Pendant Electrical 460/3/60 Status Taken down and stored indoors Bridge Speed ~ 80 FPM Max, VFD Bridge Power 1.5 HP x 2 Trolley Speed ~ 50 FPM Max, VFD Trolley Power ...more

Stainless Steel Table Top Conveyor with Photo Sensor. (2) Wooden chain rails 120 in. L for use with a maximum 4-1/2 in. chain. Sprocket: 1-5/8 in. W x 6 in. dia. x 3/4 in. space between sprocket teeth. Overall Dimension: 137 in. L x 10.75 in. W x 11.25 in. H.

Make CM Capacity 1 T Span 55' 4" Available Lift 27 ft Class C Crane Headroom 66" (26" w/ risers removed) Wheelbase 90 in Overall End Truck Length 104 in Year 2010 S/N L3360UH Control Radio (TBD) Electrical 460/3/60 Status Taken down Bridge Speed 80 FPM Max, VFD Bridge Power 0.75 HP x 2 Trolley Speed 60 FPM Max, VFD ...more

Make: Acco, Capacity: 10 Tons, Span: 97' 6", Available Lift: 38', Class: D, Crane Headroom: 56", Wheelbase: 189", Overall End Truck Length: 236", Year: 2009 (older bridge), S/N: 535-20-4438, Control: TBD, Electrical: 460/3/60, Status: Taken down, Bridge, - Speed: ~ 120 FPM Max, VFD, - Power: ...more

Qty (2) Available - One 2017 and one 2006, Make R&M Capacity 2 Tons Span 46' 9" Available Lift 20' Class D / H4 Crane Headroom 24" Wheelbase 79" Overall End Truck Length 94" Year 2017 (2006 also available) S/N 12085751 Control Pendant Electrical 460/3/60 Status Taken down Bridge Speed 80 FPM Max, VFD Bridge Power 0.5 ...more

Make ShawBox Capacity 30 T Span 22' 1-1/2" Available Lift 31 ft Class C Crane Headroom 50 in Wheelbase 108 in Overall End Truck Length 142 in Year 1991 S/N K1-72341 Control Pendant Electrical 460/3/60 Status Taken down Bridge Speed 75 FPM Bridge Power 1.5 HP x 2 Trolley Speed 50 FPM Trolley Power 1 HP Hoist Speed 12 ...more

Make P&H Capacity 10 Tons Span 72' 3-1/2" Available Lift 30' Class D Crane Headroom 65" Wheelbase 132" Overall End Truck Length 162" S/N T-44800 Control Radio Electrical 460/3/60 Status Taken down Bridge Speed ~ 120 FPM Max, Static Stepless Bridge Power 10 HP Trolley Speed ~ 80 FPM Max, Static Stepless Trolley Power 2 ...more

Make R&M Capacity 5 Tons Span 34' 0" Available Lift 20' Class D / H4 Crane Headroom 31" Wheelbase 78" Overall End Truck Length 94" Year 2011 S/N HLW27909 Control Pendant Electrical 460/3/60 Status Taken down Bridge Speed 80 FPM Max, VFD Bridge Power 0.5 HP x 2 Trolley Speed 65 FPM Max, VFD Trolley Power 0.9 HP Hoist ...more

Make: Yale, Capacity: 50 T, Span: 26' 6", Available Lift: 30 ft, Class: D, Crane Headroom: 70 in, Wheelbase: 156 in, Overall End Truck Length: 180 in, Year: 2003, S/N: Model 250-30D08-V-108, Control: Pendant, Electrical: 460/3/60, Status: Taken down, Bridge Speed: 80 FPM Max, VFD, Bridge Power: 3 HP x 2 ...more

Make: Kone, Capacity: 30 Tons, Span: 47' 6", Available Lift: 31', Class: C, Crane Headroom: 71", Wheelbase: 47" Bogey, 136" Total, Overall End Truck Length: 148", Year: 2014, S/N: HOX01515, Control: Pendant, Electrical: 460/3/60, Status: Taken down, Bridge, - Speed: ~ 100 FPM Max, VFD, - ...more

Make R&M Capacity 2 Tons Span 54' 6" Available Lift 31' Class D Crane Headroom 48" (including 20" stool) Wheelbase 106" Overall End Truck Length 118" Year 2008 S/N HHW16837 Control Pendant (may have radio, please inquire) Electrical 460/3/60 Status Taken down Bridge Speed 80 FPM Max, VFD Bridge Power 1 HP x 2 Trolley ...more

used- preferred packaging model pp181228 automatic shrink tunnel. chamber size: 18"w x 12"h x 28"l. has live roller chain conveyor, approximately 16" wide x 39" long. 1/60/220volt, 40 amps. serial# a580503.

- Skid mounted, - Chain-driven with rollers under shell, - Falk gearbox Motor:, - 20 HP (15 kW), - 1750 RPM, - 256T frame, - 230/460 V, - 3 Ph, - 60 Hz.

Make Shaw Box Capacity 20 T Span 19' 11" Available Lift 20 ft Class C Crane Headroom 46 in Wheelbase 120 in Overall End Truck Length 148 in Year 1996 S/N L5 84317/6 Control Pendant Electrical 230/460/3/60 Status Taken down Bridge Speed ~ 100 FPM Max, VFD Bridge Power 2 HP x 2 Trolley Speed ~ 65 FPM Max, VFD ...more

1-USED HOIST MODEL FKE 15 30,000 LB ELECTRIC FORKLIFT.

Make P&H Capacity 5 T Span 47' 6" Available Lift 37 ft Class D Crane Headroom 51 in Wheelbase 102 in Overall End Truck Length 128 in Year 2002 S/N CD-34483BB Control Pendant Electrical 460/3/60 Status Taken down Bridge Speed 120 FPM Max, VFD Bridge Power 0.75 HP x 2 Trolley Speed 75 FPM Max, VFD Trolley Power 0.5 HP x ...more

Used National bulk equipment 55 gallon drum elevator with approximately 12' hoist. With approximately 12' high capability. Chain hoist driven by 1 HP gearhead motor. Has 26" wide X 29" front to back X 53" high compartment for drums. Previously used for feeding plastic drums into granulator., NATIONAL 55 Gallon.

L-M EQUIPMENT 150 MP-7-SS Portable Yard Saw. -- Portable yard saw 48" H x 52" W cut capacity with 15 HP electric motor. -- Unit comes with 7' DEP with.404" pitchsaw chain, take up assembly,pivoted sawbar guide, automatic chain oiler and side shift with 3" right to left movement. -- The saw unit is mounted to (3) ...more

L-M EQUIPMENT 200 MP-7-SS Portable Yard Saw. 48" H x 52" W cut capacity with 20 HP HONDA V-Twin gasoline engine. -- Unit comes with: Double Ended 7' Abrasion Resistant Saw bar running a 0.404" premium semi-chisel saw chain. -- The saw bar pivots on a rigid steel LM "TUFFEE" mandrel and uses a spring loaded LM take ...more

ORDER 3, Model : 1, SN 1M-1413, Deburrs Tube I.D./O.D. and Bar O.D., Both Ends =Adjustable Brush Position Allows for Adjustment of Brush Contact without Changing Feed Rail Widths Length Capacity: 5" to 80" Tube Diameter: 1/4" to 3" Tube Squares, Max.: 2-1/4" x 2-1/4" Rectangle: Derived Output, Max.: 6000 PPH Brushes: ...more

New Carolina FIBC Super Sack Bulk Bag Unloader Discharge Station w/ Demag Hoist, Bulk Bag Discharge Station, Hoist Type, 304 SS Contact materials., Includes Demag chain hoist rated for 4,400 LBS., Drawing # FIBC-GA-10530-1., Overall dimensions: 67"x67"x194" H., Weight = 2,600 LBS., Includes Support Dish ...more

, Whiting 15 Ton x 20' span double-column bridge crane, single 15T hoist, center drive. Enjoy efficient operation with pendant controller, speeds up to 300 FPM, 480V 3-phase. Perfect for large-scale material handling tasks. Serial number: 7627., Spec Sheet:, Whiting 15 Ton x 20' Span Double Column Bridge ...more

Make Yale Capacity 7.5 T Span 17' 3" Available Lift 26 ft Class D Crane Headroom 50 in Wheelbase 90 in Overall End Truck Length 103 in Year 2016 S/N G32021UF Control Pendant Electrical 460/3/60 Status Taken down Bridge Speed 100 FPM Max, VFD Bridge Power 1 HP x 2 Trolley Speed 50 FPM Max, VFD Trolley Power 0.5 HP ...more

CAPACITY-----------------1/2 TON, OAL JIB LENGTH----------10' 6", HOIST TRAVEL------------10', COLUMN HEIGHT--------8' 10", 1/2 TON BUDGIT HOIST, PENDANT CONTROL, 220/3PH VOLTAGE.

Morgan merchandizer, 32” blade, 20 HP motor, 10 HP hydraulic pack, 4” chain and 18′ trough, 3 strand deck 12.6” wide x 11” long, Includes 40′ log trough with 4-arm kicker, double chain with 2 ½ links., Ready to load.

Make: R&M, Capacity: 15 Tons, Span: 25' 11-3/8", Available Lift: 26', Class: C, Crane Headroom: 44", Wheelbase: 103", Overall End Truck Length: 122", Year: 1999 (w/ 2009 VFDs/Controls), S/N: A99016710, Control: Pendant, Electrical: 460/3/60, Status: Taken down, Bridge, - Speed: 100 FPM Max, VFD, - Power: 2 HP x 2 ...more

Globe 5 head panel trim saw 5 powered screws adjustable heads, chain races Lug chain, with air cylinders to raise or drop saw head Approximate panel capacity: 8 feet WIDE X 26ft LONG, Prior use of saw was cutting large full-size sheets (8ft+ x 26ft+?) at a particleboard manufacturer- directly after sheets came out of ...more

Whiting 45 Ton crane indoor class “D", Span……….67’ 4’’, Lift……….20’ft Plus, Hoist speed….18ftpm, Trolley speed….100ftpm, Bridge speed….156ftpm, Controls 480 VAC 3PH in stainless steel enclosures, 5 Speed pendant, Year 1985.

Make Demag Capacity 30 T Span 37' 0" Available Lift 22' Class D Crane Headroom 63" Wheelbase 158" Overall End Truck Length 182" S/N 75173 Control Pendant Electrical 460/3/60 Status Taken down Bridge Speed 120 / 30 FPM (high speed currently disabled) Bridge Power 4 / 1 HP x 2 Trolley Speed 100 / 25 FPM Trolley Power 2 ...more

LARICK 410 Shaper / Sander (Feed Through)Designed and Manufactured to give years of dependable service.s: -- The 410 will Shape and Sand a wide variety of workpieces. -- The 410 is Standard with a New easy-to-use Touchscreen that displays RPM and Load for each motor. -- With a 6" Wide Feed Chain and (4) four staggered ...more

, Patterson Kelley 24" diameter Zig Zag Continuous Blender, size 24 CSN. Maximum density: 55 lbs/cu.ft., with 10 HP, 230/460 V, GE Motor and gear chain drive. Believed to be Unused., PATTERSON KELLEY 24CSN, Blender/ Mixer Type. ZIG ZAG, Size. 24", Material. CS, Weight. 0.

One (1) Used Renold 200 Cottered Roller Chain, figure 8 / curved side bar, 2-1/2" pitch (pin-to-pin), roller width 1-1/2", (13) links per chain.

MFG: Kone Cranes, Yr: 2008, Model: HHW 15902, Class: H3, 40 ton, Span: 41' 9.5", Lift: 21', Hoist Speed: 10.0/1.6 FPM, Trolley Speed: 65.0 FPM460V./3/60, 43.8 total amp.

Make Kone Capacity 35 T Span 28' 0", can be converted to standard crane Available Lift 23 ft Class D Crane Headroom 29' Total Height Wheelbase 176 in Overall End Truck Length 200 in Year 2006 S/N HFY36217 Control Radio Electrical 460/3/60 Status Taken down Bridge Speed ~ 100 FPM Max, VFD Bridge Power 3.5 HP x 2 ...more

CAM-WOOD - XL 300,.Dip Chain Gang Rip Saw: Short Stock version12" Width cap.; 3/8" min. to 3-3/4"; max. cutting depth; 7" min. stock length.: -- 70 mm Dia. saw sleeve (one is included) with (2) keyways and the following spacers: (4) 15 mm, (4) 10 mm, (18) 1 mm, (10) 0.5 mm, and (8) 0.25 mm (see drawing after the ...more

GORBEL FS300-10-18 Jib CraneGORBEL Jib Crane with 500 Lbs capacity, 10' HUB (height under beam), 18' span. : -- Circular coverage with up to 360 rotation. -- Designed to support tool balancers, air balancers, vacuum lifts and hoists. -- Most can be bolted directly to existing floors without adding special ...more

Make Kone Capacity 40 T Span 90' 0" Available Lift 41 ft Class D Crane Headroom 104 in Wheelbase 168 in Overall End Truck Length 198 in Year 2006 S/N HFY37042 Control Radio Electrical 460/3/60 Status Taken down Bridge Speed ~ 120 FPM Max, VFD Bridge Power 5 HP x 2 Trolley Speed 80 / 16 FPM, VFD Trolley Power 2.5 HP x ...more

Make Yale Capacity 10 T Span 11' 4" Available Lift 20 ft Class C Wheelbase 80 in Year 1995 S/N 1516942A Control Radio w/ backup pendant Electrical 460/3/60 Status Taken down Bridge Speed 75 FPM Bridge Power 1 HP x 2 Trolley Speed 40 FPM Trolley Power 0.5 HP Hoist Speed 14 / 5 FPM Hoist Power 10 / 3.3 HP STEEL SUPPORT ...more

CAM-WOOD XL300/5116 DIP CHAIN GANG RIPSAW12" Width cap.; 5-5/8"; max. cutting depth; 14"; min. stock length; Designed to meet the exacting standards required for high quality production line use. CAM-WOOD’s Rip Saws are manufactured to precise tolerances, and the newest designs for operator safety and volume ...more

SERIAL. G125, ROLL FACE. 76", ROLL DIAMETER. 8", 3 ROLL DESIGN. YES, CHAIN DRIVE WITH ADJ SPEED MOTOR. YES.