Buy or Sell Your 10 Foot Power Squaring Mechanical Shears

Used Durco Centrifugal Pump, Model 2K2X2X10, D20 Alloy, 2" x 2" x 10" impeller, rated 150 GPM @ 18' head at 1800 RPM, mechanical seal with lubricator, on base with 20 H.P. 230/460 volt drive, XP, Serial No. 457950.

PIRANHA (USED) MODEL P-3 IRONWORKER, 8" THROAT DEPTH, PUNCH, - 50 TONS, - 13/16 THRU 3/4" MAX MATERIAL, - 5" THRU 1/8" MAX HOLE SPECIAL TOOL, PLATE SHEAR, - 14-5/8" LONG, - 1" X 4", - 3/4" X 10", - 5/8" X 14", ANGLE SHEAR, - 5" X 5" X 3/8", - ...more

Stock #: 210250051, Location: Decatur, GA, Brand: Cincinnati, Model: 3750 CH, Serial #: 48120, Approx. Shipping Weight: 21,000, Approx. Shipping Dimensions: 16' L x 9' W x 9' H, Max Thickness: 3/8", Blade Length: 125", Main Motor Output: 40, Hold-downs: 13, Electrical: 240V 3PH, Cincinnati CNC ...more

SERIAL. 1263M0205, MODEL. D.O.70-24M, PUNCHING CAPACITY. 70 TONS, PUNCH STROKE. 2", HOLE CAPACITY. 1-1/8" THRU 3/4" PLATE, FLAT SHEAR. 24" X 3/8" THICK OR 6" X 1" THICK, ANGEL SHEAR. 6" X 6" X 1/2", NOTCHER. 3" X 5" X 3/8", THROART. 9", DUAL OPERATOR. YES, ELECTRIC FOOT TRIP. YES, MOTOR. 10 HORSEPOWER.

This economically priced hydraulic guillotine shear comes standard with many s not normally found at this price point such as, CNC controlled blade gap and rake angle. This all works together to get the best quality sheared parts every time on a wide range of materials., CUTTING LENGTH: 120", MILD STEEL CAPACITY: ...more

Unused Chemineer agitator drive, model 30DNT, 1.5 hp air operated motor drive with mechanical seal, approximately 27" long stainless steel shaft with prop blade, serial# 556382, new 2006.

- Dual-operator hydraulic ironworker – work two stations simultaneously, - Heavy-duty 110-ton punching capacity, Plate shear.: up to 7/8″ mild steel (22 mm), Angle shear.: 6″ x 6″ x 5/8″ at 90°, Notcher.: up to 2-3/8″ x 3-1/2″ x 1/2″, Round bar shear.: 1-3/8″ ...more

EquipmentIronworkerUsed 2006 Scotchman FI8510-20M 85 Ton 5-Station Hydraulic IronworkerUsed 2006 Scotchman FI8510-20M 85 Ton 5-Station Hydraulic IronworkerHave one to sell?Sell Now1 (714) 253-4707used@jpsint.comConditionUsedQuantity1 availableRequest QuoteLoading.Have one to sell?Sell ...more

Geka 55 Ton ‘Hydracrop’ Multi-Station Ironworker, H-50, Inventory # 9849, Model: H-50, S/N: 3346, Capacity:, Punch Tonnage: 55 Tons, Punch Hole: 1 1/8″ x 1/2″ Mild Steel, Punch Stroke Distance: 2 3/8″, Punch Strokes per Minute: 25, Shear:, Angles @ 90°: 4 1/2″ x 4 1/2″ x ...more

Capacity (Mild Steel): 12 Gauge, Capacity (Stainless Steel): 14 Gauge, Max Cutting Length: 48" (Nominal), Strokes Per Minute: 62 SPM, Number of Hold Downs: 9, Back Gauge Range: 24", Front Gauge Range: 36", Rake Angle: 3/8" per Foot, Motor: 3 HP / 1800 RPM, Electrics: 480V / 3 Phase / 60 Hz, Rear Operated Manual ...more

Overview, Type:IronworkersManufacturer:GEKAModel:HYDRACROP 55/AStock #:120669Status:For SaleSerial #:15752Country:United States, Punch Capacity: 1-1/2" x 3/8", Punch Throat Depth: 10", Flat Plate Shear Cutting Capacity: 12" X 5/8", Angle Cutting Capacity: 4-1/2" x 4-1/2" x 3/8", Angles ...more

Scotchman 40 Ton Hydraulic Ironworker, 4014-CM, Inventory # 9764, Model: 4014-CM, S/N: 2195U286, Punching Capacity: 40 Tons, Max. Hole Size: 1″ in 1/2″ Plate, Flat Bar Shear Capacity: 1/4″ x 10″, 3/16″ x 14″, Angle Iron Shear Capacity: 3″ x 3″ x 5/16″, Round and ...more

This listing is for a USED Piranha P50 50Ton Ironworker. It is designed for punching, shearing, and notching mild steel. This unit is categorized as a hydraulic ironworker and includes capabilities such as 50ton punch force, punching capacity up to 11/16 inch through 1/2inch mild steel, multiple shear stations, and ...more

Mubea 71 Ton Mechanical Ironworker, 71-5, Inventory # 10107, Model: 71-5, S/N: 133A/35630/24, Capacity: 71 Tons, Throat Depth: 19 1/16″, Punch Capacity: 1 1/16″ thru 3/4″ Mild Steel, Angle Shear: 5″ x 5″ x 1/2″, Plate Shear: 8″ x 3/4″, Round Bar: 2″, Square Bar: 1 ...more

Stock #: 131240031, Location: FL, Brand: Edwards, Model: 55 Ton, Year: 2012, Approx. Shipping Weight: 3,000 Lbs., Approx. Shipping Dimensions: 48" L x 48" W x 64" H, Loading Fee: Rigging Required, Tonnage: 55, Punch Capacity: 1-1/16" Dia. in 5/8" Mild Steel, Flat Shear Capacity: 1/2" x 12" ...more

Product SCOTCHMAN DO 95/140-24M 95 Ton Dual Operator Hydraulic IronworkerSerial#, Punching Capacity 95 ton, 1-3/16″ in 1″ Special Tooling 4″ Max. Dia. Throat Depth Flat Bar Shear, (Sabre Blade – Standard) 24″ Length, 1″ x 8″, 3/4″ x 12″, 1/2″ x 16″ ...more

ARYMA HIGH PRODUCTION CIRCLE AND RING SHEAR, MODEL. #KS3/1000, SERIAL NUMBER. #15264-93, YEAR OF MANUFACTURE. 1983, SHEARING CAPACITY MILD STEEL 3.0MM, SHEARING CAPACITY STAINLESS. 3.0MM, SMALLEST DISC DIAMETER OUT, OF SQUARE BLANK. 150MM, LARGEST DISC DIAMETER OUT OF, SQUARE BLANK. 1000MM, LARGEST DISC DIAMETER OUT ...more

Make: Geka, Model: Hydracrop 165SD, Year: 2026, Machine Location: Upon Request, Two Cylinder Ironworker, SD Version: 610 mm Extended Throat, Punching Power: 185 Ton, Maximum capacity: Ø 40 x 30 mm, Ø 34 × 34 mm, Shearing of Angles at 90°:205 x 205 x 18mm, Shearing of Flat Bars: 750 x 20 mm, 400 ...more

MAXIMUM (rated on mild steel), Punching (50Tons) 13/16” diameter through 3/4” plate, Throat Depth 5”, Open Height 11-1/2”, Closed Height w/o Die Block 7-3/4”, Stroke Length 3-3/4”, Round Bar Shear (with optional knives) 1/4” through 1-3/8”, Square Bar Shear (with ...more

Punching (110 Tons) 1 7/16" diameter through 1" plate Throat Depth 12 inches Bending (Optional) 12" up to 24" w/4-way die block Round Bar Shear 1/2" through 2" Square Bar Shear 1/2" through 1 3/8" Flat Bar Shear 20" x 1/2", 18" x 3/4", 12" x 1" Angle Shear 6" x 6" x 5/8" Coping/Notching 4" x 6" x 3/8" Motor 10 HP ...more

ANGLE SHEAR:, in NON-DEFORM CUT in WITH NO MATERIAL LOSS, ANGLES SQUARE -------------------------- 5 in X 5 in X 1/2 in OR, 6 in X 4 in X 1/2 in, ANGLES ON 45 DEGREE MITRE (LEG IN) ----- 3 in X 3 in X 5/16 in, BAR SHEAR:, ROUND BARS ----------------------------- 1-3/4 in, SQUARE BARS ---------------------------- 1-3/4 ...more

(NEW) SCOTCHMAN HYDRAULIC IRONWORKER, MODEL: DO 95/140-24M, STANDARD S, Dual Operator Allows For Two Operators To Work At The Same Time At Full Capacity, 95 Ton Punch Station, Keyed Punch Ram For Safety, Punch Gauging Table With Fence and Scale, Die Holder Complete With 2" Die Insert, Punch Nut With Wrench, Adjustable ...more

Punching (88 Tons) 1-1/16 diameter through 1 plate Throat Depth 9 inches Bending (Optional) 24, 36, 48 w/4-way die block Round Bar Shear 1/4" through 1-1/2" Square Bar Shear 1/2 through 1 Flat Bar Shear 8 x 3/4, 12 x 5/8, 24 x 1/4 Angle Shear 5 x 5 x 3/8 Coping/Notching 2-3/4 x 4 x 1/4 Motor 10 HP Weight 4700 pounds ...more

Key and Capabilities, Tonnage: 80 Tons, Punch: 1-3/8" hole in 3/4" mild steel (standard), or 2-1/4" hole in 7/16" mild steel, Bar Shear: 1/4" x 24", 1/2 x 20, 3/4 x 10, 1 x 6, Angle Shear (90): 6" x 6" x 1/2" slug type, Angle Shear (45): 4" x 4" x 1/2", Throat Depth: 9", Motor: 7.5 HP (Standard 220V/3PH; optional ...more

-3.5" x 3.5" Square, -3" x 5" Rectangle (tooling in Mill), -Line Direction: Right to Left, -Material Thickness: 0.135" Consisting of the following:, -Dahlstrom Coil Car: AC Motor Drive AC Motor Jack Screw Lift Floor Mounted Rails, -Dahlstrom Uncoiler: 18" Wide with 4 Keepers AC Gear Motor with Clutch Drive Hydraulic ...more

MODEL NUMBER.:6, SERIAL NUMBER.:525356, PUNCHING.:, MAX DIA. THRU THICKNESS.:1-1/4" THRU 7/8" TK, DIA. THRU MAX THICKNESS.:1-1/16" THRU 1" TK, SHEARING.:, FLATS.:1-1/8" X 6", 3/4" X 10", 1/2" X 14", ROUNDS.:2-3/16", SQUARES.:2", ANGLES.:90 DEGREES - 6" X 6" X 1/2", ANGLES.:45 DEGREE MITRE- 5" X 5" X 1/2", TEES.: 4" X ...more

Here We Have:, Uni-Hydro Hydraulic Ironworker PRO 56 220v 1ph, OPTIONS INCLUDED IN YOUR PRICE:, Square Notcher in 4th Station $1500, Slug Type Angle Shear 3x3x3/8” T40-56) $1300, 10 Pack Punches and Die Sets $480, Bar Shear Table $350, Grease Bank $175, $3805 In Options, Standard Equipment, 6″ Open throat ...more

BRADBURY IN LINE CUT TO LENGTH SHEAR, CAPACITY. 14GA, BLADE LENGTH. 50", CANTELEVERED ENTRY. 4 ROLL 2" DIA., ADJUSTABLE ENTRY GUIDES. 48", DRIVEN PINCH ROLLS. 5" DIA., STRAIGHTING ROLLS. 2 OVER 3, 3" DIA., TYPE. FLYING SHEAR.

Caterpillar D343 Engine, Turbocharged, Mechanical Fuel System, Approximately 350 Hp Rating, Industrial Power Unit W/ Radiator, Air Compressor, Drive & Accessories As Pictured. 30 Day Parts Warranty Excellent Running Engine, See Video. -- No Smoke Or Blowby Observed During Cold Test Run.

Tonnage 600, Stroke 18 inches, Shut Height 35 inches, Adjustment 5 inches, Bed Size 96" LR x 60" FB, Ram Area 96" LR x 60", SPM 20 SPM, Standard, Rebuilt 600 ton Verson Press Model S2-600-96-60t, Straight Side Mechanical Press, 600 ton Capacity, 18" Stroke, 35" Shut Height, 5" Motorized Adjustment, 96" LR x 60" FB Bed ...more

UNI-HYDRO 42-14, Tonnage. 42 T, Angle (L1). 3", Angle (L2). 3", Angle (T). 0.25", Flat Bar Shear. 3/8 x 14 / x 10 / 5/8 x 6, Punch Capacity. 1-1/8 x Mild Steel, Rod Shear. 0.75", Throat. 6".

Geka 88 Ton Dual Cylinder Hydraulic Ironworker with Semi-Paxy CNC Positioner, Hydracrop 80PD, Inventory # 10103, Model: Hydracrop 80PD, S/N: 16887 “2011”, Punching Power: 88 US Tons, Throat: 19 3/4″, Max. Punch Capacity: Ø 1 1/2″ x 9/16″, Punching Stroke: 2 3/4″, Shearing ...more

110 Ton Hydraulic Ironworker with Complete Punching Attachment with split dovetail mounting 5 Punch and Die sets Automatic Urethane Hold Down on the Punch Stripper and on Angle Plate and Bar Shear., Punching (110 Tons) 1-7/16” Diameter Through 1” PlateThroat Depth 12”Bending (Optional) 12” Up ...more

SERIAL. 5411, MODEL. MK-20, PUNCH CAPACITY:. 1-3/16" THRU 3/4", PUNCHING CAPACITY. 1" THRU 7/8", DEPTH OF THROAT. 20", SHEAR CAPACITY PLATE. 3/4", SHEAR CAPACITY FLATS. 6" X 3/4", SHEAR CAPACITY ROUNDS. 2-1/8", SHEAR CAPACITY SQUARES. 2", 90 DEGREE ANGLES. 6" X 6" X 1/2", 45 DEGREE ANGLES. 4" X 4" X 1/2", NOTCHER. 3" ...more

Punching Capacity 150 ton 1-7/8" in 1" 2-1/2" in 3/4" 136 mt 47 in 25 mm 64 in 19 mm Special Tooling 4" Max. Dia. 102 mm Max. Dia. Throat Depth 12" 305 mm Flat Bar Shear (Sabre Blade - Standard) 24" Length 1" x 14" 3/4" x 24" 610 mm 25 x 356 mm 19 x 610 mm Angle Shear 90 degree 6" x 6" x 1/2" 152 x 152 x 12 mm Angle ...more

Used 3 HP Lightnin agitator drive, model 82-S-3, right angle design, 155 RPM output, 11.5:1 ratio, mechanical seal, explosion proof, serial# 716383.

Tonnage- 55 ton, Punching capacity- 1-1/16” in 5/8” Mild steel, Punch stroke- 1-1/4”, Punch throat depth- 7-1/2”, Punch open height- 8-1/8”, Punch shut height- 6-7/8”, Punch work height- 39-1/16”, Flat bar shear capacity- 14” x 3/8” Mild steel, Max shear rounds- ...more

Fimal Model Concept 350 PLUS 3200 Panel Saw Squaring Length: 3200mm (~126") Blade Diameter: 300/350mm Blade Bore Size: 30mm Blade Projection @ 90 Degrees: 75/100mm Blade Projection @ 45 Degrees: 45/67mm Blade Speed: 4000 g/min Blade Carriage Speed: 40 mt/min Main Saw Blade Motor: 7.5HP (5.5kW) Reinforced Fixed Front ...more

Punch Capacity 88 Tons 1 in 7/8 Punch Capacity Throat 12 inches Punch Capacity Stroke Length 4 inches Punch Capacity Cycles 29/min Punch Capacity Working Height 41" to top of die Angle Shear Maximum Capacity 90 6" x 6" x 1/2" Angle Shear Maximum Capacity 45 3" x 3" x 3/8" Angle Shear Working Height 46 inches Section ...more

Product, Buffalo Hydraulic Ironworker, MODEL OH, SERIAL# 79y3885, CAPACITY IN 65,000 PSI TENSILE STRENGTH STEEL:, PUNCHING- 1 1/16 thru 1/2″, 13/16 thru 5/8″, ANGLES- 3 x 3 x 3/8″, ROUNDS- 1 3/8″, SHEAR- 1/4 x 7″. 3/8 x 6″, 1/2 x 4″, COPER- 2″ x 2 1/4″ thru ...more

Unimat Gold 6-Head Moulder, Manufacturer's to be confirmed, Unimat Gold 6-Head Moulder,. 4-3/4" x 9-1/16" capacity., 1-1/2" diameter spindles, Spindle Configuration: 10 HP Bottom, 10 HP Right, 10 HP Left, 15 HP Top, 20 HP top, 10 HP Bottom. 6,800 RPM on all spindles., 5.5 HP inverter controlled variable speed feed ...more

Cutting capacity:, Mild steel 12 x 14 Ga., Stainless steel 12 x 18 Ga., soft alminum 12' x 10 Ga., min. thickness 22Ga, Blade length 12', Strokes per minute 10-12, Throat depth 18", Worktable height 34 1/2", Front support arm 24", Back gauge 24" manual back gauge, Blade rake angle 2 degree, Oil tank cap. 26 ...more

8" x 8" x 3/4" ANGLE 185 TON GEKA HYDRACROP 165/S IRONWORKER, MAKE: GEKA, MDL: HYDRACROP 165/S, S/N: 927, YR: 2002, PUNCH-, CAPACITY 165 TON, Maximum Capacity : 40 x 30 mm (1.5'' x 1.18''), 34 x 34 mm (1.33'' x 1.33''), THROAT DEPTH: 20", ANGLE SHEAR-, ANGLE SQUARE: 8" X 8" X 3/4" ...more

Pre Owned Geka Hydracrop 110 A Hydraulic Ironworker, Punching Capacity 120 Tons, Punch Throat 12”, Bar Shear 2” Dia Max, Plate Shear 24” X 5/8”, Angle Shear 6” X 6” X 1/2” Max, Bending 120 Tons, Hydraulic Unit 3HP 12 Gal, Dual Electric Foot Switch, Dual Cylinders., Approximate ...more

Punch Capacity 66 Tons 1-1/2" in 3/8" material or 2" in 5/16" material Punch Capacity Throat 12 inches Punch Capacity Stroke Length 4 inches Punch Capacity Cycles 30/min Punch Capacity Working Height 40" to top of die Angle Shear Maximum Capacity 90 5" x 5" x 1/2" Angle Shear Maximum Capacity 45 2.5" x 2.5" x 5/16" ...more