Buy or Sell Your 10 Foot Power Squaring Mechanical Shears

CINCINNATI 1812 SHEAR, Length of knives 12' 4", Blade size 1" X4", Distance between housings 12' 3", Gap 18", Rake angle 1/4", Number of holddowns 13, Holddown to knife edge 5/8", Distance under holddown 1/2", Floor to top of bed 32-1/2", 6" in Floor, Motor 10 HP / 1770 RPM, Volts 230 /3Phase, Approximate ...more

MODEL #: 300 G 16, SERIAL #: S11156, 16' MAXIMUM CUTTING WIDTH, 3/8" MILD STEEL THICKNESS CAPACITY, 48" FRONT OPERATED BACK GAUGE, RETRACTABLE BACK GAUGE, POWERED RAKE ANGLE ADJUSTMENT, ONE SHOT LUBE, 18" THROAT DEPTH, 1986, 30 HP 230/460/60/3, 18' LR x 100" FB x 128" TALL, 60,000 LBS ESTIMATED WEIGHT.

Serial: 19773, Model: 1416, Capacity: 12 gauge, Blade length: 14', Front Operated Power Back Gauge, Speed: 60 strokes per minute, Auto Lube, Hydraulic Hold Downs: 16, Square Arm, Electric Foot Pedal, Main Motor: 15HP.

Max. Cutting Length 120" Back Gauge Range 27" Throat 13 1/2" Type Hydraulic Number of Hold Downs (Hydraulic) 13 Strokes Per MInute 21 Horsepower 10 H.P. Dimensions (L x D x H) 145" x 72" x 62" WEIGHT 11,000 Lbs. s Front Operated Power Back Gauge With Indicator Square Arm (2) Front Supports Ball Transfer Table Electric ...more

Inventory No. 0418-130-0301 Manufacturer Adira Model No. GHS-1330 Name Shear Arrival Date 04-24-2026 Dimensions L x W x H (inches) 171 x 102 x 78 Capacity 1/2” MILD STEEL Electrical 3/60/220/440 Weight (lb.) 22740 Category Fabrication Condition Used Available Quantity 1 Serial No. 2424/6903 Make Year 1993 Item ...more

Make: Chicago, Model: HS3165, Year: 1900, Machine Location: Wisconsin, Capacity: 10′ x 1/4″, Speed: 16 SPM, Hold Downs:13, Table Height: 32″, Cutting Angle: 1°, 30′, Front Gauge: 49″, Back Gauge: 31 1/2″, Motor: 10 HP.

1/4” x 12 ft. cap28,000 lbs.Approx. Dims: 174″ x 87″ 86″Options or Upgrades, 36” backgaugeManual rapid blade gap adjustmentStroke length adjustmentHydraulic backgauge lift for sheet clearanceBlades reground & resetHoldowns resealed.

Make: Cincinnati, Serial # 47284, Model: 4SE20-FSU-3, Material Width: 20', Material Thickness: 1/2", Blade Length: 20.5', Throat Depth: 18", Number Of Holdowns: 23, Back Gauge Range: 60", Main Motor: 40 H.P., Max Speed: 28 spm, 60" Power Back Gauge, Electric Foot Switch.

Spec, ERBEND, Erbend’s motorized metal shear machine comes a 750mm back gauge system. A digital touchscreen digital NC controller unit that allows people to input specific dimensions guaranteeing the most accurate cuts possible. What’s more, there are sliding front sheet support arms that help the metal ...more

ROPER WHITNEY, PH52, 10 GA X 4' SHEAR, 575/3/60, ROPER WHITNEY PH52, Max Gauge. 16 gauge, Length of Blade. 48".

SERIAL. 326888T, MODEL. HS414, LENGTH OF BLADES. 52", CAPACITY, MILD STEEL. 14 GAUGE, CUTS PER MINUTE. 40, HYDRAULIC MOTOR. 3 HP, MACHINE PRICED LESS HYDRAULIC MOTOR.

Capacity3/4" to 1.75" Cutting Force130 Tons Shear Length12" to 36" Maximum Bar Length43" (3-15" Bar Feeds) Hydraulic Unit Motor100 Horsepower Auto CycleYes.

¼” X 12’ Hydraulic Power Squaring Shear with Dial - In Front Operated Power Backhauge, Inch & Single Modes, Foot Pedal with Hand Lever, Rake and Blade Clearance Adjustment and Flush Floor Design., Max. Thickness: ¼”, Max. Thickness in Stainless: 3/16”, Length of Blade: ...more

Folio: MV18381, OMAGATTI 7, Omagatti 7 Shear, Capacity: 20' x 1/2", Table: 34" x 276", Model: #7, System: Hydraulic, Throat: 20 1/2", Working Height: 36", Distance between walls: 249", Blade Dimensions: 244" x 4 5/8" x 1 1/4", Country of Origin: Italy, 21 Hydraulic Presses, Voltage: 440V, Machine Dimensions:, Length: ...more

12 GA x 4' PEXTO POWER SQUARING SHEAR, MODEL 12-U-4F S/N 596654 NEW 1959, CAP. MILD STEEL. 12 GA, CAP. STAINLESS STEEL. 14 GA, CUTTING LENGTH. 48", HEIGHT. 48", RAKE PER FOOT.375, BACK GAUGE RANGE. 24", FRONT GAUGE. 36", STROKES PER MINUTE. 62, MOTOR. 1,800 RPM / 5 HP / 220/440 / 3 PHASE, FLOOR SPACE. 79" x 77" ...more

72"10 Ga (Mild Steel), 14Ga. (Stainless Steel), 1/4" (Solf Aluminum)80"2832"36"26" Manual Backgauge2.5 Degree7.5 HP, 3 Phase, 220 VAC (10A/440VAC optional)100" x 43" x 68"5,550 lbs..

Capacity: 10' x 1/2"Overall Blade Length: 12"Distance Between Housings: 124"Floor to Top of Bed Distance: 35"Number of Hold Downs: 16Motor: 29 HPElectrical: 550V/3ph/60Hz, Front Operated Powered Backgauge w/ Mechanical Readout60" Squaring Arm w/ Support Leg(2) Front Support ArmsFlip Up Blade Safety GateMotorized ...more

55 Ton Ironworker with Foot Pedal Control, Punching, Notching, Angle Shearing, Flat Bar Shearing, Round & Square Shearing and 2 Simultaneous Work Stations., Flat Bar Shearing: 8” X ¾”, Length of Blade: 12”, Angle Shear at 90°: 4” X 4” X ½”, Angle Shear at ...more

48"12 Ga (Mild Steel), 16 Ga. (Stainless Steel), 8 Ga. (Soft Aluminum)26 Ga. 52"3532"36"26" Manual Backgauge2 Degree4HP, 3 Phase, 15 Amp, 220 VAC (7A/440VAC optional)72" x 42" x 67"2,110 lbs..

Distance between housings. 8'3" LR, Holddowns. 9, Holddown total pressure (tons). 23, Rake. 1/2 IPF, Four-Edge knife size (L x Face x W). 8' x 4" x 1", Throat. 18", Distance floor to pass line. 34-3/4", Back Gauge Range. 36", Weight. 26.000 lbs., O.A. Dimensions.(lr x fb x high). 7'6" x 10'4" x 9' ...more

Shears, Hydraulic120"Mild Steel 10 x 14Ga. / Stainless Steel 10 x 18 Ga / Soft Aluminum 10' x 10 Ga26 Ga.10' 1"14-1816"30.5"24"26"1.5 degrees20 Gallson5-1/2 HP 220V/440V, 3PHASEe (Optional: 440V 3-Phase)139 x 35 x 52"H5200 lbs..

Capacity Mild Steel 12' X 1/2" Length Of Knives 162" Gap 163.5 Rake Angle 19.69 Hold-down 0 Degree To 1.5" (adjustable) SPM 40 Floor to top of bed 44-1/2" Pump Hydraulic Motor 40HP Electrical 230/460/360 Dimension (L x D x H) 186" X 96" 102" WEIGHT 36,400 Lbs s Foot Pedal Front Support Amada Controls and Back Gauging ...more

½” X 10’ Hydraulic Shear with ENC100 Controller, 72” Squaring Arm, 39” Capacity Backgauge, Quick Set Blade Gap Adjustment, 4 - Edged Blades and Transfer Balls on Table., Mild Steel Capacity: ½”, Stainless Steel Capacity: ”, Overall Cutting Length: 121”, Strokes ...more

SERIAL. 505553, MODEL. 3, PUNCHING CAPACITY. 33 TON, MAXIMUM DIAMETER THROUGH THICKNESS. 1/1-16" X 3/8", DIAMETER THROUGH MAXIMUM THICKNESS. 7/8" X 1/2", DEPTH OF THROAT. 12-1/2", LENGTH OF STROKE. 1", SHEARING CAPACITIES:, ANGLES. 4" X 4" X 1/4", ANGLES AT 45 DEGREE. 2-1/4" X 2-1/4" X 1/4", FLATS. 6" X 1/2" & ...more

Model MSD40, Shear Opening 27 In, Throat to Tip 29 In, Manufactured To Fit A Komatsu PC220 Excavator If Necessary, Mounting Head Could Be Altered To Fit Another Excavator, Per Factory Literature, Shear Opening 27 In, Throat to Tip 29 In.

Stock #: 150260007, Location: Decatur, GA, Brand: Accurshear, Model: 675012, Serial #: 5147, Year: 2006, Approx. Shipping Weight: 53,000 Lbs., Approx. Shipping Dimensions: 27' L x 9'6" W x 9' H, Skidding Fee:, Loading Fee: Rigging Required, Cutting Thickness Capacity:.75", Cutting Length: 12' ...more

SERIAL. P30-620, MODEL. 1048, CAPACITY MILD STEEL. 12 GA, OVERALL LENGTH OF BLADES. 50, CUTTING LENGTH. 48", MANUAL BACKGAUGE. 24", STROKES PER MINUTE. 60, HOLD DOWNS. 8, FRONT ARM SUPPORTS. YES, FULL LENGTH FOOT TRIP. YES, MOTOR. 3 HORSEPOWER.

SERIAL. P15-551, MODEL. 1472, CAPACITY MILD STEEL. 14 GA, CAPACITY STAINLESS. 16 GA, BACK GAUGE RANGE. 24", STROKES PER MINUTE. 60, HOLD DOWNS. 12, SQUARING ARM. YES, RAKE. 3/8", FULL LENGTH FOOT TREADLE. YES, MOTOR. 2 HORSEPOWER.

Shears, Hydraulic52"1/4" Mild Steel, 10 Ga. Stainless Steel, 3/8" Soft Aluminum12-202 degrees34.5""24"24" SIKO Powered Backgauge7.5 HP, 3 Phase, 220V/35A (440V/18A Optional)17 Gallons74" x 86" x 63"5,350 lbs..

Cutting Length: 122", Cutting Capacity:, Mild Steel 10 ga., Stainless Steel 13 ga., Rake angle: 1 degree, 30', Strokes per minute: 20, Motor Power: 7.5 hp, Front gauge: 24", Back gauge: 24", Shipping weight: 6,600 lbs., Packing size: 150" x 45" x 59".

Williams & White Angle & Bar Shear, Number 14 Angle Shear, -Tonnage: 100, -Stroke: 1.750", -Area sheared: 4 sq. in., -Hole punched 1.25" x 1", -Bar sheared: 7" x 0.875" thick, -Round sheared" 2", -Angles sheared 4" x 4" x.500", -Plate split: 1", -Max shear blade 12", -Strokes per Minute: 30, -Air Clutch ...more

85 TON PUNCHING CAPACITY SPECIALTY TOOLING 4" MAX DIAMETER 10" THROAT DEPTH FLAT SHEAR 20" X 3/4" 12" X 1" ANGLE SHEAR 90 DEGREES 6" X 6" X 1/2" ANGLE SHEAR 45 DEGREES 4" X 4" X 1/2" BRAKE 12"-24" 85 TON OPEN END BRAKE MAX 1/4" X 5" FLAT ON ANGLE IRON PIPE NOTCHER SCHEDULE 40 3/4" X 1", 1.25", 1.5", 2" RECTANGLE ...more

GMC 6′ x 1/4″ Hydraulic Shear, HS-0625E, Inventory # 6294, Model: HS-0625E, Capacity:, Mild Steel: 6′ x 1/4″, Stainless Steel: 6′ x 10 Gauge, Blade Length: 78″, Strokes per Minute: 10 – 17 (Adjustable), Throat Depth: 18″, Front Support Arm: 24″, Back Gauge: ...more

Capacity (Mild Steel): 3/4", Cutting Length: 14', Strokes Per Minute (Full Stroke): 14, Strokes Per Minute (Short Stroke): 34, Back Gauge Range: 48", Number of Hold Downs: 22, Main Motor: 60 H.P., Approximate Dimensions: 301" x 110" x 106", Approximate Shipping Weight: 65,000 Lbs., Shear Control with LED Display ...more

40” x 11 ga. cap.Options or Upgrades, 24” manual b.g.

Make: Cincinnati, Model: 1812, Year: 1900, Machine Location: Ohio, Cutting Capacity: 12′ x 1/4″ mild steel, Length Between Housings: 12′ 3″, Blade Length: 12′ 4″ to 12′ 6″, Overall Dimensions: Approximately 15′ 2″ x6′ x6′ 3″, Strokes Per ...more

PUNCHING 1-1/8 in DIA THROUGH 1 in PLATE THROAT DEPT 10 inches BENDING 12" UP TO 24 in W/4-WAY DIE BLOCK ROUND BAR SHEAR 1/2" THROUGH 2" SQUARE BAR SHEAR 1/2" THROUGH 1 3/8" PLATE SHEAR 18" X 1/2", 12" X 3/4", 8" X 1" ANGLE SHEAR 5" X 5" X 1/2" COPING/NOTCHING 3 1/2" X 5" X 3/8" BLADE MOTOR 10 HP WEIGHT 4250 pounds ...more

12 ft. x ¼’’ Capacity230/460, 3ph Voltage40h.p. MotorWeight 35,000lbsDimensions 174’’ L x 87’’ W x 106’’ TOptions or Upgrades, 48’’ programmable BackgaugePower blade gapAdjustable rake angle8-24 S.P.M.

Voltage 440v, 3 Phase Maximum Cutting Length 120" Number of Hold Downs (Hydraulic) 13 Throat 14" WEIGHT 11,000 Lbs. Dimension (L x D x H) 140" X 60" X 96" s Foot Pedal Front Operated Power Back Gauge W/Indicator Supports Squaring Arm Hydraulic Hold Downs.

Manufacturer: Danieli-Wean, Product Width: 96” max, Thickness:.750” max. (45,000 PSI Yield Strength max.),.100” min., Yield Strength:, -Mild Steel:.625” x 96” wide, 60,000 PSI max., -High Strength:.500” x 96” wide, 100,000 PSI max., Line Speed: 250 FPM max., Line direction: ...more

Attached is the Spec Sheet in PDF.

Make: Birmingham, Model: H-6010, Year: 2017, Machine Location: Ohio, Cutting Length: 61″, Mild Steel: 10 gauge, Stainless Steel: 13 gauge, Rake Angle: 1°40′, Strokes Per Minute: 26, Motor Power: 5 HP, Front Gauge: 24″, Back Gauge: 24″, Dimensions (L × W × H): 84″ × ...more

SERIAL. S65201, MODEL. IF-10-1/4 II, YEAR NEW. 1991, CAPACITY. 1/4" MILD STEEL, CAPACITY STAINLESS. 3/16", OVERALL LENGTH OF BLADES. 10-2-1/2", RAKE ADJUSTMENT (POWER). 3/8 IPF, FRONT OPERATED POWER BACK GAUGE. 36", FRONT ARM SUPPORTS. 2 @ 24", BACK GAUGE CONTROLLER. MPC 2100, STROKE LENGTH. VARIABLE, STROKES PER ...more

Material Capacity Mild Steel. 1/2" X 20': 1/2" X 20', Length Between The Housing: 20' 3", Throat Depth: 18", Number Of Holdowns: 23, Back Gauge Range: 60", Main Motor: 40 H.P., Strokes Per Minute: 7-28, Approx. Shipping Weight: 77,000 lbs., 60" Power Back Gauge, Electric Foot Switch, Pit Required, NOTE: ...more

SERIAL. 48813, MODEL. 500 HS 12, YEAR OF MANFACTURE. 1995, CAPACITY. 1/2" MILD STEEL, LENGTH OF CUT. 146", FRONT OPERATED POWER BACK GAUGE. 48", RAKE ANGLE. 1/2 IPF, NUMBER OF HOLD DOWN. 15, HOLD DOWN FORCE. 23.8 TON, STROKES PER MINUTE @ 12'. 17, STROKES PER MINUTE @ 12". 50, PASSLINE HEIGHT. 36", SWING AWAY BACK ...more

288".25"21.65"4-739.43013.78"45.3"29.5 HP2 HP146" x 368" x 128"H89,303 Lbs..

240".25"21.65"9-1539.372613.78"41.34"29.5 HP2.01 HP125" x 325" x 111"H59,315 Lbs..

S:, – Fast, smooth and quiet operation, – Heavy duty foot switch with safety guard, – Compact hydraulic unit, – Heavy cast steel shear head, – Sturdy cast iron construction, – Back operated back gauge, – Automatic hold downs, – Single and continuous stroke, – ...more