Buy or Sell Your 10 Foot Power Squaring Mechanical Shears

, RBI MODEL RM-24-10, 4,000Lb. CAPACITY POWER UNCOILER, S/N 80-60105 (NEW 1980) W/24" WIDTH, HYDRAULIC, EXPANSION, 30HP HYD. PUMP, RBI MODEL CC15 4,000Lb. COIL CAR, S/N CCE80-60105, RBI MODEL CM220 20.5" x.065" STOCK STRAIGHTENER(No longer available), S/N SSK79-60088, RBI MODEL FHF6S20-24 STOCK FEEDER, S/N FK79-60087 ...more

Make: Canton, Model: 22A, Year: 1970, Machine Location: Georgia, Blade Length: 18″, Motor Power: 10 HP, Voltage: 3 Phase, 480 V, 60 Hz, Capacity (Mild Steel Bar): 3″ Round, Capacity (Mild Steel Plate): ½″ Plate × 24″ Width, Cuts Per Minute: 33-36 SPM.

for MDSC20Manufacturer Westinghouse / Cutler Hammer Product Family MAGNUM DS Type of Low Voltage Power Breaker MDSC20 Frame Rating (Volts) 635 Frame Rating (Amps) 2000 Frame Rating (KA) 100 Operating Mechanism Electrically Operated (Stored Energy) Operating Mechanism Mechanically Operated Racking Configuration Draw ...more

Punch Tonnage Capacity: 75 Tons, Shear Tonnage Capacity: 100 Tons, Max. Angle Size: 6" x 6" x 5/8", Min. Angle Size: 1-1/2" x 1-1/2" x 1/8", Max. Flat Bar: 6" x 5/8", Min. Flat Bar: 2" x 1/4", Max. Punch Size: 1-1/4", Punch Cycle Time: 2 Sec., Shear Cycle Time: 5 Sec., Shear Slug Size: 1/2", In-Feed Speed (X-Axis): 61 ...more

MIZAR - 24" Blades: Surplus Alligator Shear - IN STOCK READY TO SHIP -- Blade Length: 24" (600 mm) -- Cutting Speed: (8 - 9) Cuts/Min. -- Motor: 7.5 kW. -- Width: 36"; length: 71"; Height: 59". -- Weight: 2,750 Lbs. -- Electrical Components: SIEMENS. -- 1-Year Warranty.

DIFFERENTIAL DIRECT/REVERSE ROLL COATER NOMINAL LENGTH: 68, - SINGLE TOP COATER, - COATS 62 MAX. PRODUCT WIDTH, - APPLICATION: BLACK PAINT TO CHIPBOARD, - MECHANICAL ELEVATOR: 0 3 OPENING, - 1/2 H.P. VARIABLE SPEED DOCTOR ROLLDRIVE REVERSIBLE (6 18 FPM) ON LEFT END, - 2 H.P. VARIABLE SPEED COATING ROLL DRIVE (20 100 ...more

NICE IRONWORKER!.

72" X 3/8" BUTECH DUAL ROTARY SCRAP CHOPPERS, MODEL M217-SC: SC500-1, YEAR 1995, MATERIAL CARBON STEEL, THICKNESS RANGE:.375" -.156", SHEAR STRENGTH: 72,000 PSI MAX, STRIP WIDTH: 72" - 20.5", NOMINAL ARBOR DIAMETER: 13", MAX SCRAP WIDTH CAPACITY: 3.25" (PER STAND), SCRAP LENGTH GENERATED CONSTANT: 10", 40 HP DRIVE ...more

, Model: Bell & Gossett Series 1510 (5BC), Pump Size: 5" Discharge x 6" or 8" Suction, Impeller Diameter: 9.125", Material: Bronze Fitted (BF), Seal Type: Internally flushed mechanical seal (standard), Max Pressure: 175 psig, Temperature Rating: 225, Motor: Reliance P2504932 CF 20 HP 230/460V 3Ph 1765RPM, BELL ...more

THE BARNES SE1054L (PART NUMBER 104891) IS A SUBMERSIBLE SEWAGE EJECTOR PUMP DESIGNED FOR WASTEWATER AND SEWAGE HANDLING APPLICATIONS. THE UNIT S A 1 HP ELECTRIC MOTOR OPERATING AT 1750 RPM, CONFIGURED FOR 575–600V, THREE-PHASE, 60 HZ POWER SUPPLY., THE PUMP IS CONSTRUCTED WITH A CAST IRON HOUSING AND IS A ...more

SHEAR., SERIAL. SHC87-M1072, MODEL. G-12S-48, YEAR NEW. 1987, CAPACITY.020 TO.034, WIDTH. 48", COIL REEL. 20,000 LBS, SERIAL. SRC87-M0172, MODEL. RM48-24, YEAR NEW. 1987, MANDREL LENGTH. 48", ID OF COIL. 19" TO 24", HYDRAULIC EXPANSION. YES, STRAIGHTENER., SERIAL. SSC87-M0172, MODEL. SM448, CAPACITY.034 MAXIMUM, WIDTH ...more

Hill Acme 33 Ton Ironworker, No. 3, Inventory # 10001, Model: No. 3, S/N: 476053, Punching Capacity:, Tons: 33, Max. Diameter Thru Thickness: 1 1/16″ thru 3/8″ tk, Diameter Thru Max. Thickness: 13/16″ thru 1/2″ tk, Depth of Throat: 12 1/2″, Length of Stroke: 1″ Max., Shearing ...more

for SBSC30Manufacturer Westinghouse / Cutler Hammer Product Family MAGNUM SB Type of Low Voltage Power Breaker SBSC30 Frame Rating (Volts) 635 Frame Rating (Amps) 3000 Frame Rating (KA) 100 Operating Mechanism Electrically Operated (Stored Energy) Operating Mechanism Mechanically Operated Racking Configuration Draw ...more

Includes 2500 Labounty Rotating Shear, JOHN DEERE 350D.

Used Art Prozess & Labortechnik model MICCRApi-D-75 DFK-3 stainless steel inline homogenizer / disperser. Unit rated 8,000 litre per hour depending on product. Unit direct driven by 7.5kw, 460volt, 3/60, 3510rpm motor with double acting mechanical seal. Includes Warman Model 1.5/1 BAH Centrifugal pump. All mounted ...more

Westinghouse 250HP LAC Induction Motor, Make: WestinghouseModel: HSDPType: LAC Induction MotorPower Output: 250HPRPM: 708Voltage: 550 VoltsAmperage: 263 AmpsFrequency: 60HzPhase: 3-PhaseFrame: 5008-USheave: 8V Grooves: 16Dimensions: 14in Dia. x 18in Long, Location: Savona, British Columbia, Canada.

Here We Have:, New Uni-Hydro 56 Ton (5624) Ironworker, 1 Phase 220v, Optioned as Shown, Grease Bank Kit Standard, Bar Shear Table Standard, Over Sized Punch and Die Kit $290.00 Option, 10 Pack Punch and Die Starter Set $480.00 Option, Punch Nut Wrench $25.00 Option, OPTIONS: $795.00, In building the 5624 Chuck Dvorak ...more

for SBS32Manufacturer Siemens / Allis Chalmers Product Family SB Type of Low Voltage Power Breaker SBS32 Frame Rating (Volts) 600 Frame Rating (Amps) 3200 Frame Rating (KA) 100 Operating Mechanism Mechanically Operated Racking Configuration Bolt In.

This stapler/binder is made by Deluxe Stitcher and is a Model #ESA-1585 and is part of their M2 product line & includes manuals & parts list. It is the ideal unit for print shops & binderies requiring rapid output of production. It is especially suited for flat and saddle work ranging in thickness from 2 ...more

60 Ton Bliss-C-OBI Asset: 042, Serial Number: H69096, Capacity: 60 Ton, Stroke: 6” 152.4mm, Slid Adjust: 3" 76.2mm, Shut Height: 17.5” 444.5mm, Die Area: F-B 30" x 20" 762mm x 508mm, Slide Area: 17" x 11" 431.8mm x 279.4mm, Floor Space L-R & F-B: 65" x 38" 1,651mm x 965.2mm, Approximate Height Above ...more

35" Jaw Opening * Set up for a Liebherr, jaw depth 38", For 70,000 lb excavator as 2nd member, or 144,000 lb excavator as 3rd member, Jaw opening 35 inches, and jaw depth 38" and 9 ft 10" reach as 2nd member, LaBounty Mobile Shears four-way indexible blades, replaceable wear parts for easy maintenance, and a patented ...more

Punch Capacity 70 Ton, 1-1/8" in 3/4" Special Tooling 4" Max. Dia. Throat Depth 9" Flat Bar Shear (Sabre Blade-Std.) 110 Ton, 24" Length Angle Shear 90 Degrees 6" x 6" x 1/2" Angle Shear 45 Degrees 3" x 3" x 3/8" Angle Shear 45 Degrees (With Bar Shear) 4" x 4" x 1/2" Square Rod (Max.) 1/4" To 1", 1 Cavity Brake 12" 65 ...more

for MDSC20Manufacturer Westinghouse / Cutler Hammer Product Family MAGNUM DS Type of Low Voltage Power Breaker MDSC20 Frame Rating (Volts) 635 Frame Rating (Amps) 2000 Frame Rating (KA) 100 Operating Mechanism Electrically Operated (Stored Energy) Operating Mechanism Mechanically Operated Racking Configuration Draw ...more

SERIAL. 12354, DRIVE MODEL. M15T, TURNING CAPACITY. 15 TON, WEIGHT CAPACITY OF DRIVE ROLL. 5 TON, WEIGHT CAPACITY OF IDLER ROLL. 5 TON EACH, DIAMETER OF ROLLS. 16", WIDTH OF ROLLS. 4", RUBBER COATED WHEELS. YES, DISTANCE BETWEEN WHEELS. 17-1/2" MIN, 44" MAX, TANK DIAMETER. 4" TO 144", VARIABLE SPEED MECHANICAL. 6.3 TO ...more

, MANUFACTURER - AUTOMATIC FEED COMPANY, YEAR - 1989 (NEW CONTROLS UPGRADE 2020), TYPE - TRAPEZOID CUT TO LENGTH LINE, MATERIAL - 0.020" - 0.100", YIELD STRENGTH - 25,000 PSI - 40,000 PSI, DEPENDING ON WIDTH & THICKNESS A HIGHER YIELD STRENGTH IS FEASIBLE. CONTACT, OUR OFFICE FOR FURTHER INFORMATION, WIDTH RANGE - ...more

for SED364000Manufacturer Square D Product Family SE Type of Low Voltage Power Breaker SED364000 Frame Rating (Volts) 600 Frame Rating (Amps) 4000 Frame Rating (KA) 100 Operating Mechanism Electrically Operated (Stored Energy) Operating Mechanism Mechanically Operated Racking Configuration Draw out Shipping Width 24 ...more

Gast Manufacturing, Inc. model 2AM-NCW-7A is a compact industrial air motor designed for use in hazardous and industrial environments. This pneumatic motor is manufactured in Benton Harbor, Michigan, USA and is marked with ATEX classification II 2 GDc T4, indicating suitability for certain gas and dust hazardous ...more

STOCK #CB-12878:, ONE (1) 3000 AMP, 4160 VAC, 350 MVA I.C., GE, TYPE VB-4.16-350-0, ELECTRICALLY OPERATED, DRAWOUT, VACUUM CIRCUIT BREAKER, 125 VDC CLOSE AND TRIP, MFG. 1990, WITH ML-17 SPRING, CHARGED OPERATING MECHANISM, 60 KV BIL, 41 KA SHORT, CIRCUIT, 78 KA CLOSE AND LATCH, 5 CYCLE INTERRUPT, 181, OPERATIONS.

62" Wide Dusenbery Model 635 Duplex Slitter Rewinder, Shafted unwind, 3" air shaft, 40" max diameter, Air cooled brake at unwind, Automatic edge guide, Slitting is razor in groove, some blades and knife holders included, Speed: 500 fpm max mechanical speed, Cork covered pull rolls, Rewind diameter: 24" without lay on ...more

Nominal Capacity2" Upsetting Power (MP)250 Gripping Power, Vertical Slide (MP)315 Stroke245 mm Gather140 mm Strokes Per Minute53 Motor15 KW Die Size - Width400 mm (15.75") Die Size - Depth315 mm (12.4") Die Size - Thickness125 mm (5") Overall Dimensions2700 mm x 2200 mm x 2800 mm (106" x 87" x 110"), WITH PARTS FEEDER.

Used 0.06 sq meter Rosenmund filter dryer, model RGFR 0.06-02-40054, hastelloy C22, 50 liter total capacity, 30 liter effective capacity, rated 90 psi and full vacuum at 302 f internal and cored agitator, jacketed side and bottom filter plate rated for 90 psi and full vacuum at 302 f, removable bottom filter plate ...more

Manufacturer: VFS, Type: Front Load Vacuum Temper Furnace, Load Dim’s: 36" wide x 48" deep x 30" high, Max Temp: 1200°F, Power: 480 Volts, 3-Phase, 60 Hz, VRT: 225 KW, 350 Amps, Control Panel: 120 Volts, Maximum Load: 2500 pounds, Cooling Fan: 50 HP Spencer, Mechanical Pump: Stokes 212, Controls:, Opto Vac ...more

Mechanical Feedingfrom 0 up to 24.8" (630mm) Wire Diameter Range0.315" (8mm) Strip Width1" (25mm) Maximum Strip Thickness0.08" (2mm) Approx. Weight4500 lbs Approx. Floor Size144" x 47" x 79"H, 2 Plane Straightener, Powered Payoff.

MTC-1000 Mobile Fuel Polishing System, Removes heavy and fine contaminants such as sludge, water, and particulates from fuel storage tanks (15 GPM flow rate) Portable system design for easy transportation Multi-Stage filtration process with fine filter bypass Prevents unnecessary mess, catching potential drips or ...more

Stamco High Speed Shear, -For use in Cut-to-Length Line, -Capacity: 0.055" - 0.250" x 72" (65,000 PSI), -SPM: 150 (was in CTL Line running 150 FPM), -Air Clutch and Brake, -30 HP AC Motor, 1085 RPM (Motor Missing), Frame 365T, Type P, -Note: Clutch and Brake were replaced in 2016., Shear was removed from service in ...more

MFG. YEAR 1952, SPM - 70, STROKE - 11", SHUT HEIGHT - 29 7/16" - 30", DIA OF TIE RODS - 10", FLOOR SPACE RL X FB - 12'6" X 9'10", HEIGHT ABOVE FLOOR - 15'6", HP - 100, LBS - 200,000, DIE SEAT RL X FB - 41 " X 47", RAM FACE RL X FB - 36" X 36".

Used Ahlstrom APP31-100 pump, iron casing, 4" X 5", 6-Vane stainless steel 12" diameter impeller, stainless steel suction plate, stainless steel stuffing box, mechanical seal, material:iron, AHLSTROM APP31-100.

230 TON X 10' CINCINNATI MODEL #230-8AS HYDRAULIC CNC, PRESS BRAKE W/ UPGRADED CONTROLS, SERIAL. 43973, MODEL. 230ASX8, YEAR NEW. 1985, UPDATED TOUCHSCREEN CONTROLS. 2011, CAPACITY. 230 TON, OVERALL LENGTH OF BED AND RAM. 10', DISTANCE BETWEEN HOUSING. 8'6", STROKE OF RAM. 10", OPEN HEIGHT. 17", CLOSED ...more

Manufacturer Westinghouse / Cutler Hammer Product Family SPB For Equipment Type SPB Mechanism Operation Type MANUAL/MOTOR Shipping Width 10 in Shipping Height 10 in Shipping Depth 10 in Shipping Weight 15 lb.

We offer a variety of both, over the road truck and industrial replacement engines for the Cummins N14 CELECT. Our remanufactured Cummins N14 engines (N14 Mechanical, N14 CELECT, N14 CELECT+) come as a 3/4 long block and are not running trim condition. Our remanufacturing process strips the core down to the bare block ...more

Inventory No. 0126-083-0004 Manufacturer Interplex Model No. 2022 Name Flex Punch Machine Arrival Date 02-02-2026 Dimensions L x W x H (inches) 52 x 29 x 105 Electrical 1/50/220 Weight (lb.) 1210 Category Fabrication Condition Used Available Quantity 1 Serial No. FTS-N2280226-AT1 Item 33" X 14".

THIS DOUBLE MANDREL CAROUSEL RECOILING SYSTEM ENABLES A PROCESS LINE TO RUN, CONTINUOUSLY AND EFFICIENTLY ALLOWING FOR A FINISHED COIL TO BE WOUND ON THE, FIRST RECOIL MANDREL AND COIL REMOVED AS THE SECOND MANDREL IS POSTIONED TO, RECEIVE THE INCOMING COIL. DOUBLE MANDREL CAROUSEL SYSTEM IS CURRENTLY, INSTALLED ON ...more

for NW25 HManufacturer Square D Product Family MASTERPACT NW Type of Low Voltage Power Breaker NW25 H Frame Rating (Volts) 635 Frame Rating (Amps) 2500 Frame Rating (KA) 100 Operating Mechanism Mechanically Operated Racking Configuration Bolt In Shipping Width 24 in Shipping Height 24 in Shipping Depth 29 in Shipping ...more

Make: Chicago Dreis & Krump, Model: SS-150-30-60, Year: 1965, Machine Location: Wisconsin, Capacity: 150 tons​, Bed Size: 30 inches x 60 inches​, Stroke Length: 6 inches​, Shut Height: 16 inches​, Ram Adjustment: 4 inches​, Speed: 30 strokes per minute​, Drive Type: ...more

Siemens GBB161.1E Rotary Air Damper Actuator, AC 24 V, DC 010 V, 25 Nm, 150 s - Siemens GBB161.1E Rotary Air Damper Actuator, AC 24 V, DC 0.10 V, 25 Nm, 150 sWith self-centering shaft adapter for shaft dia. 8.25.6 mm, square 6.18 mm, min. shaft length 20 mmWith position indication and adjustable mechanical limit ...more

DIAMETER BASIC WIRE. 3/32", MAXIMUM WIDTH STRIP METAL. 1", STD. FEED LENGTH. 8", SHELL CAMS, 7 ROLL 2 PLANE STRAIGHTENER, VERT. TOOL POST & STRIPPER, MECHANICAL CLUTCH, AUX. FRONT SLIDE, FRONT, REAR, LEFT & RIGHT SLIDES, ELECTRICAL PANEL, STOCK CHECK, GRIPPER FEED, MOTOR DATA: 1-1/2 HP, 208-220/440V, 3PH ...more

Mid-level Vertical for a variety of materials that do not require a 100% chip-free finish. -- 3 HP Industrial-duty saw motor. -- 8" Blade cap. with 1-3/4" max. material thickness. -- 64" Crosscut (vertical position) with spring loaded counterbalance system. -- Unlimited rip capacity. -- 90 Saw head rotation to switch ...more

SERIAL. P50 4374, MODEL. P50, YEAR NEW. 19, PUNCHING CAPACITY. 50 TONS, PUNCH THROAT. 8", TABLE. 8" X 16", STROKE. 3-3/4", OPEN HEIGHT. 11-1/2", CLOSED HEIGHT. 7-3/4"1, ANGLE. 3" X 3" X 3/8", PUNCH HOLE SIZE. 13/16" THRU 3/4" PLATE, STROKES PER MINUTE. 30, SHEAR. 13" X 1/4", COPER/NOTCHER. 40 TONS.