Buy or Sell Your 10 Foot Power Squaring Mechanical Shears

Weight4075 pounds.

Inventory No. 1225-089-0003 Manufacturer Niagara Name Sheet Metal Power Shear Arrival Date 01-07-2026 Dimensions L x W x H (inches) 45 x 107 x 46 Capacity 72" Electrical 3/60/220/440 Weight (lb.) 1875 Category Fabrication Condition Used Available Quantity 1 Item 1.5 Hp.

13’ X ¼” Hydraulic Shear with Estun E21S “Go-To” Front Operated Power Backguage, Foot Pedal with Emergency Stop, Squaring Arm, Front Arm Supports, Manual Gap Adjustment, Shadow Light, Single or Continuous Operation, Cycle Counter and LNTech Rear Light Curtains., Maximum Cutting Length: ...more

Used Amada Mechanical Power Shear, Model M-3060, CAPACITY, MILD STEEL. 1/4"SHEARING LENGTH. 120"BLADE LENGTH. 133"RAKE ANGLE. 1 DEGREE 28'SPEED. 60 SPMBACKGAUGE RANGE.25" - 36"NUMBER OF HOLDDOWNS. 13MOTOR SIZE. 15 HPDIMENSIONS. L x W x H. 170" x 80" x 70"WEIGHT. 18,500 LBS., 36" AMADA FRONT OPERATED POWER BACK ...more

ORDER 10, 122" CUTTING LENGTH, 1/2" CUTTING CAPACITY, 5.1" MAX STROKE LENGTH, 10 SPM, HOLD DOWNS, SQUARING ARM, FRONT ARM SUPPORTS, ENC 100M PROGRAMABLE BACKGAGE, 40 HP 3PH 60 HZ 230 460, 13.5' X 10.7' X 7.4' T APROX, 27,500 LBS APROX.

Make: AccurShear, Model: 850010, Year: 1989, Machine Location: North Carolina, 1/2" x 10' Capacity:, Basic :, AccurShear 850010, Capacity:1/2" x 10', Backgauge: Travel:36", 8' Squaring Arm x1/16"inc, Full Strokes Per Minute:9, Short Stroke Per Minute:35, Motor:40 HP, Power wired:220/440 3ph, Machine ...more

Make: Accurshear, Model: 625010, Year: 1996, Machine Location: Illinois, Capacity: 1/4″, Length: 10′, Knife Size (inches): 1″ x 3″ x 124″, Fixed Rake Angle: 1/4″, Number of Hold Downs: 16, Hold Down Tonnage: 16, Stroker Per Minute: 23, Motor: 20 HP, Machine Weight: 17,000 LBS ...more

– Cutting Capacity: 1/4″ (6.35mm) mild steel, – Cutting Length: 10’6”, – Throat Depth: 5-7/8”, – Rake Angle: 1°30’, – Motor: 15 HP, – Weight: ~16,100 lbs, – Dimensions (L x W x H): 154” x 68” x 70”, Condition:, – Back ...more

EquipmentPower Squaring Shears (Inch)2003 Birmingham 135tonx10' H-1065 Hydraulic Shears2003 Birmingham 135tonx10' H-1065 Hydraulic ShearsHave one to sell?Sell Now1 (714) 253-4707used@jpsint.comConditionUsedQuantity1 availableRequest QuoteLoading.Have one to sell?Sell NowOverviewType:Power Squaring Shears ...more

Make: Pines, Model: SVR 3, Year: 2008, Machine Location: Canada, Max Material Thickness: 0.5″, Max Cutting Length: 10′, Approx. Weight 20,000 lbs, Control: Delem DAC-360.

¼” X 10’ Hydraulic Shear with Knuth Conversational Controls, Front Operated Backgauge and Blade Gap., Max Thickness:.25”, Length of Blade: 125”, Voltage: 220/440V / 3Ph / 60 Cycle, Dimensions: 160” X 64” X 64”, Weight: 16,000 Lbs, INCLUDES: Knuth Conversational ...more

HTC (USED) MODEL U37-12 HYDRAULIC POWER SQUARING, SHEAR, 3/8" X 12' CAPACITY, 24" SQUARING ARM, REMOTE FOOT SWITCH, 36" TWO-SPEED FRONT OPERATED POWER BACKGAGE, 60 HP.

CINCINNATI HYDRAULIC SHEAR, MODEL: 250 X 12 FT, SERIAL NUMBER: 45118, Cutting Length: 146.88", Capacity, Mild Steel: 1/4", Maximum Rake Inches/Foot:.375, Holddowns: 13, Back Gauge Range: 36", Knife Size: 1" x 3" x 150", 15 HP Motor, 36" Front Operated Power Back Gauge, 10' Squaring Arm, (2) 36" Front Supports ...more

SERIAL. A874803 MODEL. 250-10A CAPACITY, MILD STEEL. 1/4" LENGTH OF CUT. 10'4" FRONT OPERATED POWER BACKGAUGE. 36" BACKGUAGE DAUL SPEEDS. FAST & SLOW NUMBER OF HOLD DOWNS. 9 DOWN SPEED. 220 IPM RETURN SPEED. 293 IPM ELECTRIC FOOT TRIP. YES MOTOR. 25 HP.

MODEL. 2H10 CENTURY CAPACITY. 10' X 1/4" MILD STEEL CAPACITY STAINLESS. 10' X 3/16" LENGTH OF BLADES. 10'6" HOLDDOWNS. 11X HYDRUALIC POWER BACKGAUGE. 36" FRONT OPERATED & READOUT SPEED. 16 SPM, FULL LENGTH CUTS ELECTRIC FOOT TRIP. YES ADJUSTABLE STROKE. YES CONTROL. INCH - SINGLE STROKE MOTOR. 15 HP.

S:, Front Operated Cybelec Cybtouch Control for easy programmingFront Squaring Arm 39”Front Support Arm (2)Ball screw driven backgauge for accuracy, Adjustable stroke lengthSide/Rear Safety Guards with Light Beam CurtainElectric Foot Pedal with emergency stop, MODEL: MGH 3113, CAPACITY: 10’ x ...more

CAPACITY.: 1/2", LENGTH.: 144", # OF HOLDOWNS.: 19, SUPPORT ARMS.: YES (2), SQUARING ARM.: 72", MODES.: SINGLE/CONTINOUS/ INCH, Machine Type.Shears, Power Squaring (In) Manufacturer.CHICAGO Model.N/A Year.N/A Condition.Not specified.

10 ft. x 1/4” cap.Options or Upgrades, 39” Power backgauge, Adj. blade gap, Adj. rake angle.

” X 10’ Hydraulic Squaring Shear with Accurshear SC-2 CNC Controller with Pre-Select Positions, Sequential Single Step, Go-to-Positions Function, Programmable Backstop with Retract Stroke, Foot Switch Control and Heavy Duty Designed Backgauge., Capacity: ”, Length: 10’, Motor: 30 HP, Power ...more

Inventory No. 1125-085-0002 Manufacturer Amada Model No. S-1232 Name Shear Arrival Date 12-30-2025 Dimensions L x W x H (inches) Unavailable Capacity 53" Electrical 3/50/60/400/460 Weight (lb.) 4915 Category Fabrication Condition Used Available Quantity 1 Serial No. 12321352 Item Made In Japan, W/tooling/hardware ...more

1/4” x 10 ft. cap.Options or Upgrades, Elgo backgauge control39” backgaugePneumatic sheet support system.

1/4” x 12 ft. capblade gap adjustOptions or Upgrades, 36” backgauge.

SERIAL. 86239, MODEL. CM500A FEMAS, REBUILT BY U S GOVERNMENT. 1993, CAPACITY. 1/4", SHEARING LENGTH. 80", FRONT OPERATED POWER BACK GAUGE. 36", NUMBER OF HYDRAULIC HOLD DOWNS. 12, DEPTH OF GAP., AIR CLUTCH. YES, RAKE ADJUSTMENT. MANUAL, AUTMATIC LUBE SYSTEM. YES, MOTOR. 10 HORSEPOWER, *** MACHINE UNUSED AFTER REBUILD ...more

Year: 1986, Make: Atlantic, Model: HDE, Max Guage: 1/4", Cutting Length: 10', Number of Hold Downs: 18, Weight: 13,500lbs, Dimensions: 194" x 52" x 53"H, (1) Squaring Arm, Front Operated Power Backgauge, Foot Pedal, **Personal inspection of all equipment is highly encouraged**, *Sold as is ...more

SERIAL.: H52-519, MODEL.: H52, CAPACITY.: 16-GA, LENGTH OF BLADES.: 52", MANUAL BACKGAUGE.: YES, Machine Type.Shears, Hydraulic Manufacturer.WYSONG Model.H52 Year.N/A Condition.Used.

10 GA x 8' CINCINNATI MDL# 1008 MECHANICAL SQUARING SHEAR, CAPACITY, MAX. 10 GA.MILD STEEL, SHEAR LENGTH. 8', DIST. BETWEEN HOUSINGS. 8' 3", WEIGHT. 10,550 LBS., BACK GAUGE, FRONT OPERATED, FOOT PEDAL, CONTROLS MOUNTED, SQUARING ARM, 5 HP 1655 RPM 220/440 VOLT 3 PHASE, 14.4/6.8 ZMP MOTOR.

½” X 10’ Hydraulic Power Shear with Front Operated Power Backgauge with Indicator, Hard Cut-Outs in Table, Solid Table and Foot Pedal., Length of Blades: 122”, Depth of Gap: 12”, Front Operated Power Backgauge: 48”, Floor to Top of Table: 32”, Squaring Arm: 48”, Strokes ...more

Wysong Shear with Rowe Entry Pinch Roll Assembly, Wysong Shear:, -Model: 1472, -Capacity: 0.075" x 72" (Mild Steel), -73" Face Blade (Straight Blade), -Strokes Per Min: 60 (Approx.), -2 HP AC Motor (Approx.), -Entry Passline Roll, Rowe Driven Pinch Roll Assembly:, (Less Drive Motor), -Model: PTD-72, -Serial Number: ...more

12 GA x 4' PEXTO POWER SQUARING SHEAR MODEL 12-U-4F… S/N 596654… NEW 1959… CAP. MILD STEEL. 12 GA CAP. STAINLESS STEEL. 14 GA CUTTING LENGTH. 48" HEIGHT. 48" RAKE PER FOOT.375 BACK GAUGE RANGE. 24"FRONT GAUGE.″6" STROKES PER MINUTE. 62 MOTOR. 1,800 RPM / 5 HP / ...more

10 ft. x 1/4” capblade gap adjustOptions or Upgrades, 39” programmable backgauge.

Maximum cutting length 126" (3200mm), Maximum shearing capacity, mild steel 1/4" (6mm), Throat depth 5.9" (150mm), Number of strokes per minute 14, Backguage length 24" (600mm), Number of holddowns 14, Blade rake 1 degree 30 minutes, Main motor power 15 HP (11 KW), Electrics 230/3/60 or 460/3/60, Dimensions (L x W x ...more

Red Bud Shear:, • Manufacturer: Red Bud Industries, Inc., • Model Number: SH24-250-72, • Width: 72 inches, • Material: CRS-HRS (Cold Rolled Steel/Hot Rolled Steel), • Thickness Range: 0.040 - 0.250 inches, • Maximum Weight: Not specified.

3/8" MS10'16214430 HP460V/3/6021,000 LBS.

SERIAL.431-303, MODEL. NH5216, YEAR NEW. 2003, CAPACIITY. 16 GAUGE, CAPACITY STAINLESS. 20 GAUGE, LENGTH OF BLADES. 52", STROKE PER MINUTE. 25, SQUARING ARM. YES, FRONT ARM SUPPORTS. 2, BACK GAUGE. 26", FOOT PEDAL. YES, MOTOR HORSEPOWER. 3, HARDLEY USED. LIKE NEW.

“Normal wear from use, ready to work!”, Brown & Boggs 16GA x 4ft Gap shear, Complete with back gageFront support armsSheet hold-down, Only $2,499.00 USD! Sold as is, shipping not included. Loaded, FOB Mtl, this machine is duty free to the USA!, Call us today for any questions you have! Toll free ...more

Cincinnati 1008 Mechanical Power Squaring Shear 10 Ga. x 8 #6150 #2, Capacity (Mild Steel): 10 Ga., Cutting Length: 8', Rake Angle: 7/32 / Ft, Number of Hold Downs: 8, Back Gage Range: 24, Strokes Per Minute: 65, Motor: 5 HP 220 / 440 V, Weight: 11,000 Lbs., Rear Operated Power Back Gauge With Indicator, Square ...more

12 GA x 4' PEXTO POWER SQUARING SHEAR, MODEL 12-U-4F S/N 596654 NEW 1959, CAP. MILD STEEL. 12 GA, CAP. STAINLESS STEEL. 14 GA, CUTTING LENGTH. 48", HEIGHT. 48", RAKE PER FOOT.375, BACK GAUGE RANGE. 24", FRONT GAUGE. 36", STROKES PER MINUTE. 62, MOTOR. 1,800 RPM / 5 HP / 220/440 / 3 PHASE, FLOOR SPACE. 79" x 77" ...more

Product Niagara Model 1F 10-1/4 Hydraulic Shear, Capacity- 10′ of 1/4″ Mild Steel, Power Back Gauge- 36″, Strokes Per Minute- 24, 15hp 230/460 3ph, Blades are in good shape., I will add better pictures and video as soon as I get some time..

, MFG: Cincinnati, Inc., Model: 2500, S/N: 46886, 12' Max. Material Width, Max. Gauge Thickness:.250 Mild Steel based on 60,000psi(413,000kPa), Max. Tensil Strength, Squaring Arm, Back Gauge, Missing original CNC controls/touchscreen, Has manual controls via, foot peddal, Elec: 480/3/60, 42.3 Full Amp, Cinci Elec. ...more

1" X 12" CINCINNATI MODEL 10012 MECHANICAL SHEAR, New 1944, Motor Driven with 40 HP, 3-Phase, 60 Cycle, AC Motor and Controls, Capacity 1", Length 12", Standard Front Gage Range 70", Standard Back Gage Range 48", Speeds 20 SPM, Rake 5/8" Inch Per Foot, Knife Size 1-3/4" x 6-1/2" x 149", Approximate Weight 90,000 Lbs.

3/8" x 10' PACIFIC MODEL 375R10 HYDRAULIC SHEAR, MANUFACTURER - PACIFIC, MODEL -375R10, CAPACITY - 3/8", LENGTH - 10', MOTOR - 25 HP, 60 HZ, 230/460 V, 3 PHASE, DIMENSIONS - 143" X 87" X 118", WEIGHT - 35,000 LBS, INCLUDES:, CONTROLS MOUNTED ON SHEAR, FOOT PEDAL, 96" SQUARING ARM, (2) 30" SUPPORT ARMS, FRONT ...more

Make: Accurl, Model: QC 12Y 8 x 3200, Year: 2015, Machine Location: New York, Cutting Thickness: 5/16" (0.31"), Cutting Length: 125", Strokes: 8 SPM, Power Capacity: 15 HP, E21S CNC Control, Backgauge.

Piranha 10’ x ¼” Hydraulic Shear, Model M1/4-10, Serial # M1/4-10 1039, Asset # 12291, Capacity, Mild Steel 1/4″, Capacity, Stainless Steel 3/16″, Cutting Length 10′, Rake Angle (inches/foot) 1/4″, Strokes @ 2/3 Capacity, Full Cut Length 24 SPM, Strokes @ 2/3 Capacity, Min. ...more