3" x 3" x 3/8" Uni-Hydro #PRO-56, Ironworker, 56 ton, 6" throat, 4-way 14" bar shear, 5 HP, 7 SPM, 1200 psi hydraulics, 220 Volt, 1PH

Here We Have:
Uni-Hydro Hydraulic Ironworker PRO 56 220v 1ph

OPTIONS INCLUDED IN YOUR PRICE:
Square Notcher in 4th Station $1500
Slug Type Angle Shear 3x3x3/8” T40-56) $1300
10 Pack Punches and Die Sets $480
Bar Shear Table $350
Grease Bank $175
$3805 In Options

Standard Equipment
6″ Open throat punch has 56 ton capacity
Manual Punch Aligner
4-way 14″ low rake flat bar shear
Bar shear hold-down can be fixed or adjustable
Magnetic starter for safety and reliability
Grease bank
Built for forklift handling
Full stroke control
Throat Depth: 6″
Tonnage: 56
Punch: 1-1/4″ hole in 1/2″ mild steel
15/16″ hole in 3/4″ mild steel
Bar Shear 3/8″ x 14″
1/2″ x 10″
5/8″ x 8″
3/4″ x 6″
Strokes Per Min
Light Material 50
Max Capacity 7

Motor 5 HP, 220v / 1ph
Hydraulics 1,200 psi
Oil Capacity 20 quarts
Dimensions (L x W x H) 33″ x 27-1/4″ x 57″
Bar Shear Work Height 29″
Punch Table Top Height 38-1/4″
Cavity Table Top Height 37-1/4″
Notcher Station Working Height 26″
Weight 1,720 lbs

Optional Equipment:
Angle Shear
Slug Type 3″ x 3″ x 3/8″
Sever Cut 4″ x 4″ x 3/8″
Miter Angle 45°
Bar Shear 3″ x 3″ x 3/8″
Slug Type 2″ x 2″ x 5/16″
Brake 6″ or 9″ x 1/4″
Pipe Notcher (Sch 40 or 80) 1/2″ | 3/4″ | 1″ | 1-1/4″ | 1-1/2″ | 2″
Coper Notcher 90° 3″ x 3″ x 1/4″ angle
Channel Shear 2″ & 3″ combined 4″ standard
Square Notcher
Notcher Station 2″ x 3″ x 3/8″
Punch or Power Cavity 1-3/4″ x 2″ x 1/4″
Rod Shear
Round (Max) 1-1/16″
Square (Max) 1-1/16″