Naab Sales Corporation
Blaine, MN 55449
Gold Level Dealer
Surplus Record Dealer Since 2007
Contact
About
Naab Sales Corporations, since 1969 - We are a stocking dealer, handling nationally recognized lines. Now connected with a national computerized listing service for the equipment we handle, we always have an up-to-date inventory. We take seriously the customers's need for immediacy. At Naab, we enjoy doing what we do best -- continuing to find better ways to serve our customers.Products & Services
- Appraisers, Machinery & Equipment
- Brakes, Press
- CNC Machinery
- Drills
- Furnaces & Ovens
- Ironworkers
- Machining Centers, CNC
- Saws
- Shears
Associations & Affiliations
77 listings in 32 categories
4-Roll Plate Bending Machines
3 Results
80" x 9/16" M.g. #420/16, 4-Roll Hydraulic Plate Roll, 1/2" pre-bend, 9.84" top roll, 10.24" center roll, 8.66" side roll, 39" working height, digital read out, 480 Volt, 3PH, 1997
Category: 4-Roll Plate Bending Machines
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: M.g.
Model: 420/16
Year: 1997
80" x 9/16" M.g. #420/16, 4-Roll Hydraulic Plate Roll, 9.84" top roll, 10.24" center roll, 8.66" side roll, 39" working height, 480 Volt, 1997
Category: 4-Roll Plate Bending Machines
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: M.g.
Model: 420/16
Year: 1997
M.g. #420/16, 4-roll hydrauic plate roll, cone rolling attachment, movable pendant arm, 1997
Category: 4-Roll Plate Bending Machines
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: M.g.
Model: 420/16
Year: 1997
Here We Have:, 4 Roll Hydraulic, MG Plate Roll Model: 420/16, 9/16” Cap., Make: MG, Model: 420/16, Serial Number: 9789, New in 1997, Length of Rolls: 80″, Thickness Rolling: 9/16″, Pre-Bend: 1/2″, Top Roll Dia: 9.84″, Center Roll: 10.24″, Side Roll Dia: 8.66″, Working Height: ...more
Bed and Knee Milling Machines - Vertical
10 Results
Acer #EVS-3VK, Vertical Knee Mill w/ CNC positioning, 10" x 50" table, 36.5" X, 17" Y, 19" Z, 20" ram travel, 3 HP, 4500 RPM, Acu-Rite Millpwr 2-Axis CNC, 2012
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Acer
Model: EVS-3VK
Year: 2012
Here We Have:, Acer “e-mill” EVS-3VK 2-Axis CNC Acu-Rite Millpwer/Manual Operation Vertical Mill, Make: Acer, Model: EVS-3VK (CNC), Year: 2012, Serial Number: N12060270, Table Working Surface: 10″ x 50″, Longitudinal Travel: 36-1/2″, Cross Travel: 17″, Vertical Knee Travel: ...more
Acer #EVS-3VK, 2-Axis CNC Vertical Knee Mill, 10" x 50" table, 36.5" X, 17" Y, 19" Z, 20" ram travel, 3 HP, 4500 RPM, Acu-Rite Millpwr CNC, 220/440 Volt, 3PH, 2012
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Acer
Model: EVS-3VK
Year: 2012
Here We Have:, Acer “e-mill” EVS-3VK 2-Axis CNC Acu-Rite Millpwer/Manual Operation Vertical Mill, Make: Acer, Model: EVS-3VK (CNC), Year: 2012, Serial Number: N12060270, Table Working Surface: 10″ x 50″, Longitudinal Travel: 36-1/2″, Cross Travel: 17″, Vertical Knee Travel: ...more
Enco #100-L588, Vertical Milling Machine, 10" x 54" table, 38.5" longitudinal travel, 17" cross table travel, 3 HP, 4250 RPM, 6" vise, Mitutoyo 2-axis digital read out, 220 Volt, 1994
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Enco
Model: 100-L588
Year: 1994
Here We Have:, Enco Vertical Milling Machine w/ 2-Axis DRO & Power Table Feed, Make: Enco, Model: 100-L588, Serial Number: 440419, New in 1994, Table Size: 10” x 54”, Longitudinal Table Travel: 38.5”, Cross Table Travel: 17”, Quill Travel: 5”, Spindle Taper: R8 Spindle Speeds: ...more
Clausing Kondia #FV-1, Vertical Milling Machine, 9" x 48" table, 30" longitudinal travel, 15" saddle travel, 16.5" knee travel, 23" ram travel, 3 HP, 4000 RPM, 2-axis Acu-Rite digital read out, 220 V.
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Kondia
Model: FV-1
Here We Have:, Clausing Kondia Model FV-1 Vertical Milling Machine, With: 2 Axis Acu-Rite DRO, Serial # Y-226, Size of table 9” x 48”, Longitudinal travel 30”, Saddle travel 15”, Knee travel 16 ½”, Ram travel 23”, Quill travel 5”, Throat distances 6-5/8” – ...more
Sharp #LC1-1/2VH, Vertical Knee Mill, 9" x 42" table, 30" X, 12" Y, 16" Z, 5" quill travel, 12" ram travel, 16" knee travel, 3 HP, 4500 RPM, Acu-Rite 2-axis digital read out, 220 Volt, 3PH
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Sharp
Model: LC1-1/2VH
Here We Have:, 9” x 42″ Sharp LC 1 ½ VH, Vertical Mill, W/ Acu-Rite 2 Axis DRO, Z Axis Pwr. Feed, Model: LC 1½ VH, Serial Number: 50222102, TABLE:, Working Surface: 9” x 42″, T-Slot Number, Size: 3, 5/8″, CAPACITY:, Table Travel: X-Axis: 30″, Saddle Travel: Y-Axis: ...more
Sharp #LC1.5VH, Vertical Knee Mill, 9" x 42" table, 30" X, 12" Y, 16" knee travel, 12" ram travel, 3 HP, 4500 RPM, Acu-Rite 2-axis digital read out, 220 Volt, 3PH
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Sharp
Model: LC1.5VH
Here We Have:, 9” x 42″ Sharp LC 1 ½ VH, Vertical Mill, W/ Acu-Rite 2 Axis DRO, Z Axis Pwr. Feed, Model: LC 1½ VH, Serial Number: 50222102, TABLE:, Working Surface: 9” x 42″, T-Slot Number, Size: 3, 5/8″, CAPACITY:, Table Travel: X-Axis: 30″, Saddle Travel: Y-Axis: ...more
Southwestern Industries Industries #TRAK-DPM, 3-Axis CNC/Manual Operation Bed Mill, 31" X, 17" Y, 25" Z, 1.5" mild steel drilling, 1.25" tapping, 4.75" boring, 5 HP, 4200 RPM, 2018
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Southwestern Industries
Model: TRAK-DPM
Year: 2018
Here We Have:, Proto Trak DPM CNC/Manual Operation Bed Mill with 3-axis A.G.E. Control UPDATED(2018), Make: Southwest Industries, Model: DPM 3 Axis, Serial # 96-2413, New in 1996 Updated Control 2018, Table size: 10” x 50”, X Travel: 31”, Y Travel: 17”, Z Travel: 25”, Quill diameter: ...more
Summit #EVS-349B, milling machine, 9" x49"table, 3 HP, 2-Axis Newall NMS800 digital read out, power feed
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Summit
Model: EVS-349B
Here We Have:, New Summit EVS 349B Milling Machine With 2 Axis NMS800 Newall DRO, X Axis Pwr. Feed, 6”Vise, Hold Down Kit, Collet Rack and Set of R-8 Collets, Motor Size 3 HP, Number of Spindle Speeds Inf. Variable, Speed Range (RPM) 0 – 4300, Spindle Taper R-8, Spindle Traverse 5”, Spindle Feed ...more
Summit #EVS349B, Vertical Knee Mill/Turret Milling Machine, 9" x 49" table, 31" X, 13" Y, 15" ram adjustment, 6" vise, 3 HP, 4300 RPM, 2-axis Newall digital read out
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Summit
Model: EVS349B
Southwest Industries #DPM, 3-Axis CNC Vertical Bed Mill, 10" x 50" table, 31" X, 17" Y, 25" Z, 1.5" mild steel drilling, 1.25" tapping, 5 HP, 4200 RPM, ProtoTRAK A.G.E. CNC, 1996
Seller: Naab Sales Corporation
Location: Blaine, MN
Model: DPM
Year: 1996
9" x 60" Timesavers #960-1MW, Wet Abrasive Sander, 0-3" sanding opening, 3-1/4" contact roll diameter, 10-33 FPM, 5 HP main motor, 220/440 Volt, 3PH, 1997
Category: Belt Sanders
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Timesavers
Model: 960-1MW
Year: 1997
Here We Have:, 9″ x 60″ Timesavers Model 960-1MW 9″ Metal, Wet Abrasive Sander, Make: Timesavers, Model: 960-1MW, Serial Number: 25237S, New in: 1997, Conveyor & Abrasive Belt Size: 9″ x 60″, Conveyor Feed Speed: 10-33 ft/min, Feed Motor: 1/2 hp, Sanding Opening: 0-3″, Contact ...more
8" width x 6" H x 12" D Grieve #BMPC8126, bench top furnace, 2000°F, Honeywell controls & timer
Category: Box Type Furnaces
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Grieve
HERE WE HAVE:, Grieve Electric Bench Top Furnace 2000°, Make: Grieve, Model: BMPC8126, Serial Number: 1558, 480V Single Phase, 10 Amp Service, Honeywell Controls, and Timer, 2000° Max Temp, Inside Dims: 8”W.x12”D.x6”H., Overall Dims. With Stand: 21.5”x30”x77”H.
Carbide, Friction and Cold Saws
1 Result
4.75" Kalamazoo #CT-350-AV, High-Speed Non-Ferrous Circular Cold Saw, 14" blade, 8" max. vise opening, 34.25" work height, 2.5 HP, 1800/3600 RPM, 230 Volt, 2015
Category: Carbide, Friction and Cold Saws
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Kalamazoo
Model: CT-350-AV
Year: 2015
Here We Have:, Kalamazoo (KMT) Model CT 350 AV High-Speed Non-Ferrous Metal Cutting Saw, Make: Kalamazoo (KMT), Model: CT 350 AV, Serial Number: 152118002, New in: 2015, Max Vise Opening: 8″, (2) Air Vises, Blade Speeds: (2) 1800 & 3600, Blade : 14″, Motor Blade Drive : 2.5 HP, Electrics: 230 Volt, 3 ...more
Kalamazoo #CT-350AV, high speed non-ferrous metal cutting saw, 2.5 HP, 2015
Category: Circular Saws
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Kalamazoo
Model: CT-350AV
Year: 2015
Here We Have:, Kalamazoo (KMT) Model CT 350 AV High-Speed Non-Ferrous Metal Cutting Saw, Make: Kalamazoo (KMT), Model: CT 350 AV, Serial Number: 152118002, New in: 2015, Max Vise Opening: 8″, (2) Air Vises, Blade Speeds: (2) 1800 & 3600, Blade : 14″, Motor Blade Drive : 2.5 HP, Electrics: 230 Volt, 3 ...more
Haas #ST-30SSY, CNC Turning Center, 12.5" X, 26" Z, 23" turning length, 18" turning diameter, 31.7" max. swing, 10" chuck, 30 HP, 4800 RPM, 12-station live tooling, 220 Volt, 2013
Category: CNC Lathes and Turning Centers
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Haas
Model: ST-30SSY
Year: 2013
Here We Have:, Haas ST-30SSY CNC Turning Center W/ Live Tooling Y Axis, Make: Haas, Model: ST-30SSY, Serial Number: 3095856, New in: 2013, Bar Capacity: 3″, Chuck Size: 10″, Spindle Speed: 4800 RPM, Spindle Motor: 30 HP, X Axis Travel: 12.5″, Z Axis Travel: 26″, Turret Tools: 24 Station, Rapid ...more
Okuma #Heritage-ES-L6II, 2" Axis CNC Lathe w/Bar Feed & Chip Conveyor, 13.7"/11.81" Swing, 1.63" Bar, 8.27" diameter x 11.81" L Turning capacity, 7.5 HP, 12-Position Turret, 2006
Category: CNC Lathes and Turning Centers
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Okuma
Model: HERITAGE ES-L6II
Year: 2006
Here We Have:, 2006 Okuma 2-Axis CNC Lathe With 2024 LNS Quick Load Servo Bar Feed & Chip Conveyor, Make: Okuma, Model: Heritage ES-L6II, S/N: D0903, Year: 2006, CATALOG :, Swing/Carriage: 13.78”, Swing/Cross Slide: 11.81”, Max. Turning Diameter: 8.27”, Max. Turning Length: 11.81”, X Axis ...more
Okuma #Heritage-ES-L6II, 2-Axis CNC Lathe, 6.1" X, 12.6" Z, 13.7" swing over carriage, 11.81" max. turning length, 7.5 HP, 6000 RPM, OSP-U10L CNC, 2006
Category: CNC Lathes and Turning Centers
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Okuma
Model: HERITAGE-ES-L6II
Year: 2006
Here We Have:, 2006 Okuma 2-Axis CNC Lathe With 2024 LNS Quick Load Servo Bar Feed & Chip Conveyor, Make: Okuma, Model: Heritage ES-L6II, S/N: D0903, Year: 2006, CATALOG :, Swing/Carriage: 13.78”, Swing/Cross Slide: 11.81”, Max. Turning Diameter: 8.27”, Max. Turning Length: 11.81”, X Axis ...more
CNC Rotary Tables and Indexers
1 Result
8.3" Haas #TR210H, dual axis trunnion rotary table, 5th axis, brushless type, 2007
Category: CNC Rotary Tables and Indexers
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Haas
Model: TR210H
Year: 2007
Here We Have:, Haas Dual Axis Trunnion Rotary Table, 5th Axis, Model TR210H, S/N 901838 (New 2007), Brushless Type, Sigma 1 Designation, Fits VF3 and Larger Machines, Catalog :, Platter Diameter: 8.30”, Max Weight On Platter: 200 Lbs., No. T Slots: 6, SPINDLE A (Tilt), Max. Speed: 60 Deg./Sec., Torque (Cont.): ...more
CNC Vertical Bed Mills
1 Result
Lagun #FTV-2, 2-Axis CNC Vertical Knee Mill, 10" x 50" table, 33" X, 16" Y, 5" Z, 3 HP, 4250 RPM, Acu-Rite Millpower 2 CNC, 220-230/380-440 Volt, 3PH, 2006
Category: CNC Vertical Bed Mills
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Lagun
Model: FTV-2
Year: 2006
Here We Have:, Lagun FTV-2 CNC Vertical Knee Mill with Acu-Rite Millpower 2 2-Axis CNC Control, Power Draw Bar, Make: Lagun, Model: FTV-2 (CNC), Serial Number: SE 46616, New in: 2006, Control: Acu-Rite Millpower 2, Table Size: 10″ x 50″, Machine Travels (X/Y): 33″ / 16″, Quill Travel: 5′ ...more
42" width x 24" H x 168" L, Conveyor oven #C98TULEP480V45KW, 150°C,
Category: Continuous Type Ovens
Seller: Naab Sales Corporation
Location: Blaine, MN
Here We Have:, Conveyor Oven Model #C98TULEP480V45KW, The Conveyor oven is designed to operate at 150°C maximum temperature and includes the following special s:, • 4.5” thick insulated walls, ceiling and floor, • CRS exterior painted machine gray, • Aluminized interior, • Conveyor ...more
Coolant Filtering Systems
1 Result
ChipBlaster #GV2-80, High Pressure Coolant System, 1000 psi, 100-gallon tank, (2) 40-liter modules, 10 GPM
Category: Coolant Filtering Systems
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Chipblaster
Model: GV2-80
The ChipBlaster GV2-80 High Pressure Cooling System is a powerful coolant delivery solution designed to improve chip evacuation, tool life, and machining precision in high-performance CNC operations. With 1,000 PSI of high-pressure coolant delivery, this system ensures efficient cooling and lubrication, allowing for ...more
Die Cutting Press Machines
2 Results
30 Ton, Associated Pacific Machine Corp #APM-SA27L, Swing Arm Clicker Press, 20" x 40" bed, 24" beam, 3.54 stroke, 5.1" daylight, 2 HP, 220 Volt, 2021
Category: Die Cutting Press Machines
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Associated
Model: APM-SA27L
Year: 2021
Here We Have:, Associated Pacific Swing Arm Clicker Press, Make: Associated Pacific Machine Corp, Model: APM-SA27L, Serial No. 2000547-2, New In 2021, Capacity: 30 Ton US, Beam Size: 24”, Bed Area: 20” x 40”, Max. Cutting Stroke: 3.54” (Adjustable), Max. Daylight Opening: 5.1”, Main ...more
30 Ton, Associated Pacific #APM-SA27L, Swing Arm Clicker Press, 20" x 40" bed, 24" beam, 3.54 stroke, 5.1" max. daylight, 2 HP, 220 Volt, 3PH, 2021
Category: Die Cutting Press Machines
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Associated Pacific
Model: APM-SA27L
Year: 2021
Here We Have:, Associated Pacific Swing Arm Clicker Press, Make: Associated Pacific Machine Corp, Model: APM-SA27L, Serial No. 2000547-2, New In 2021, Capacity: 30 Ton US, Beam Size: 24”, Bed Area: 20” x 40”, Max. Cutting Stroke: 3.54” (Adjustable), Max. Daylight Opening: 5.1”, Main ...more
14" x 40" Kent #RML-1440, Engine Lathe, 3-3/8" swing over cross slide, 21" swing in gap, 8" chuck guard, 5/2.5 HP, digital read out, 440 Volt, 2000
Category: Engine Lathes
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Kent
Model: RML-1440
Year: 2000
Here We Have:, Kent USA RML-1440 Lathe, Model: RML-1440, Serial #: 1440011404, New in 2000, Motor: 5/2.5 HP, Wired 440v 3 Phase, Height of Center: 7 3/32”, Swing Over Bed: 14 3/16”, Swing Over Cross Side: 3 3/8”, Swing in Gap: 21”, Width in Front of Faceplate: 4 ½”, Distance ...more
14" x 40" Kent #RML-1440, Engine Lathe, 10-1/4" bed width, 8-3/8" swing over cross slide, 2-1/16" spindle bore, 21" swing in gap, 5 HP, 2000 RPM, 440 Volt, 3PH, 2000
Category: Engine Lathes
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Kent
Model: RML-1440
Year: 2000
Here We Have:, Kent USA RML-1440 Lathe, Model: RML-1440, Serial #: 1440011405, New in 2000, Motor: 5/2.5 HP, Wired 440v 3 Phase, Height of Center: 7 3/32”, Swing Over Bed: 14 3/16”, Swing Over Cross Side: 3 3/8”, Swing in Gap: 21”, Width in Front of Faceplate: 4 ½”, Distance ...more
14" x 40" Sharp #1440V, Variable Speed Engine Lathe, 8-1/2" bed width, 8-5/8" swing over cross slide, 20" swing over gap, 1-1/2" spindle bore, 2-axis Acu-Rite digital read out, 2001
Category: Engine Lathes
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Sharp
Model: 1440V
Year: 2001
Here We Have:, Make: SHARP, MODEL: 1440V w/Digital Variable Speed, Serial Number: 23853, New in: 2001, S, -variable speed spindle drive with digital display, -hi-low gear shift for spindle speed, range from 30 – 2,200 RPM, -hardened & ground gears in headstock, -jog button for easy engagement of gears ...more
14" x 40" South Bend #SB1013, Electronic Variable Speed Engine Lathe, 8.3" swing over cross slide, (1) 8" 3-jaw chuck, (1) 10" 4-jaw chuck, 12" face plate, Allen Bradley 2-axis digital read out, 440 Volt, 2012
Category: Engine Lathes
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: South Bend
Model: SB1013
Year: 2012
Here We Have:, DEMO South Bend 14″ x 40″ EVS Lathe with 2 Axis DRO Model SB1013, Complete With:, 8” 3 Jaw, 10” 4 Jaw, 12” Face Plate, Steady Rest, Follow Rest, Spindle Taper, Tool Post W/ 2 Holders, Spindle Stop, Make: South Bend, Model: SB1013, Serial Number: 0030, NEW IN: 2012, Swing ...more
14-3/16" x 40" Kent #RML-1440, Engine Lathe, 10-1/4" bed width, 8-11/16" cross slide travel, 2-1/16" spindle bore, 5/2.5 HP motor, 40-2000 RPM, 440 Volt, 2000
Category: Engine Lathes
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Kent
Model: RML-1440
Year: 2000
19" x 78" Leblond Makino #Regal, Engine Lathe, 12-1/4" swing over cross slide, 3-1/16" spindle bore, 12" 3-jaw chuck, 17" face plate, 10 HP, 1600 RPM, 2-axis Acu-Rite digital read out, 440 Volt, 1992
Category: Engine Lathes
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Leblond
Model: REGAL
Year: 1992
HERE WE HAVE:, NICE WELL TOOLED 19″ x 78″ LEBLOND MAKINO SERVO-SHIFT ENGINE LATHE, W/ 3-1/16” SPINDLE BORE, 2 AXIS ACU-RITE DIGITAL READOUT, MAKE: LEBLOND MAKINO, MODEL: 19″ REGAL, 19X78, SERIAL NUMBER: 15E-484, NEW IN: 1992, HOLE THRU SPINDLE: 3-1/16″, SWING OVER BED: 19-1/4″ ...more
20" x 80" Summit #20X80B, Heavy-Duty Engine Lathe, 4-1/8" spindle bore, 10 HP main motor, 1400 RPM, 2-axis Newall digital read out, 220 Volts, 3PH, 2015
Category: Engine Lathes
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Summit
Model: 20X80B
Year: 2015
Here We Have:, SUMMIT 20″-4 x 80″ B Heavy Duty Lathe, X 4 1/8” Spindle Bore, 2 Axis Newall DRO, 4 Way Rapid Traverse, With built in Inch / Metric Threading, Taper Attachment, Make: Summit, Model:20X80B (Bulgarian), Serial Number: 41038, New in: 2015, Swing over bed: 20 ¼”, Distance ...more
20" x 80" Summit #20x80B, Heavy-Duty Engine Lathe, 13-1/4" swing over cross slide, 5" compound travel, 4-1/8" spindle bore, 10 HP, 1400 RPM, 2-axis Newall digital read out, 220 Volt, 2016
Category: Engine Lathes
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Summit
Model: 20X80B
Year: 2016
Here We Have:, SUMMIT 20″-4 x 80″ B Heavy Duty Lathe, X 4 1/8” Spindle Bore, 2 Axis Newall DRO, 4 Way Rapid Traverse, With built in Inch / Metric Threading, Taper Attachment, Make: Summit, Model:20X80B (Bulgarian), Serial Number: 41569, New in: 2016, Swing over bed: 20 ¼”, Distance ...more
20" x 80" Summit #20X80B, Engine Lathe, 16" bed width, 15" gap length, 13-1/4" swing over cross slide, 4-1/8" spindle bore, 30" swing in gap, 10 HP, 1400 RPM, 2015
Category: Engine Lathes
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Summit
Model: 20X80B
Year: 2015
Here We Have:, SUMMIT 20″-4 x 80″ B Heavy Duty Lathe, X 4 1/8” Spindle Bore, 2 Axis Newall DRO, 4 Way Rapid Traverse, With built in Inch / Metric Threading, Taper Attachment, Make: Summit, Model:20X80B (Bulgarian), Serial Number: 41038, New in: 2015, Swing over bed: 20 ¼”, Distance ...more
42" x 120" Summit #42x120, Engine Lathe, 27.5" swing over cross slide, 20" 4-jaw chuck, 30 HP, Newall 2-axis digital read out, 220 Volt, 3PH, 2004
Category: Engine Lathes
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Summit
Model: 42X120
Year: 2004
Here We Have:, 42-5.625×120 Heavy Duty Engine Lathe 5.625” Through Hole, 2 Axis DRO, Taper Attachment, “European Manufactured”, Make: Summit, Model: 42×120, Serial: 34050, New in: 2004, Swing over bed: 42.9”, Swing over cross slide: 27.5”, Work Piece Weights, At the headstock ...more
42" x 120" Summit #42X120, Engine Lathe, 27.5" swing over cross slide, 20" 4-jaw chuck, 5-5/8" spindle bore, 30 HP, Newall 2-axis digital read out, 220 Volt, 3PH, 2004
Category: Engine Lathes
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Summit
Model: 42X120
Year: 2004
Here We Have:, 42-5.625×120 Heavy Duty Engine Lathe 5.625” Through Hole, 2 Axis DRO, Taper Attachment, “European Manufactured”, Make: Summit, Model: 42×120, Serial: 34050, New in: 2004, Swing over bed: 42.9”, Swing over cross slide: 27.5”, Work Piece Weights, At the headstock ...more
Finishing Machines
2 Results
Rosler #E27-15-So, Fully Automatic High-Energy Disc Finishing Machine, 800 parts/hour, 2023
Category: Finishing Machines
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Rosler
Model: E27-15-SO
Year: 2023
Here We Have:, 2023 NEVER RAN PARTS, RSLER FULLY AUTOMATIC HIGH ENERGY DISK SYSTEMS, With Washer and Dryer Don’t miss an opportunity to save big money. Over 500k New, In Plant Ready for Inspection, Make: RSLER, Model: E27-15 So, New in: 2023, Data of work pieces, starting condition:* of work pieces: Anvil & ...more
Rosler #E27-15-So, High Energy Disk Finishing System w/ Washer & Dryer, 800 pcs/hr, 600 pcs/batch, 45 min. process time, 460 Volt, 2023
Category: Finishing Machines
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Rosler
Model: E27-15-SO
Year: 2023
Here We Have:, 2023 NEVER RAN PARTS, RSLER FULLY AUTOMATIC HIGH ENERGY DISK SYSTEMS, With Washer and Dryer Don’t miss an opportunity to save big money. Over 500k New, In Plant Ready for Inspection, Make: RSLER, Model: E27-15 So, New in: 2023, Data of work pieces, starting condition:* of work pieces: Anvil & ...more
Gap Frame Single Crank Press Machines
1 Result
121 Ton, Stamtec #G1-110S, gap frame press, 7.08" stroke, 13.78" Shut Height, 30-60 SPM variable, 1994
Category: Gap Frame Single Crank Press Machines
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Stamtec
Model: G1-110S
Year: 1994
Here We Have:, 121 Ton Stamtec Gap Frame Press Model G1-110-S, Make: Stamtec, Model: G1-110-S, Serial #: 0284, Year: 1994, 121 Ton Capacity, 7.087″ Stroke, 13.78″ Die Height (Shut Height), 3.15″ Ram Adjustment, 45.25″ LR x 23.62″ FB Bolster Area, 25.5″ LR x 18.5″ FB Ram Area ...more
H Frame Hydraulic Press Machines
1 Result
75 Ton, Dake #7-015, H Frame Hydraulic Press, 44" between uprights, 36" bed to ram, 4.5" ram stroke, 28" horizontal ram travel, 7" screw adjustment
Category: H Frame Hydraulic Press Machines
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Dake
Model: 7-015
Here We Have:, Dake 75 Ton H Frame Hydraulic Press, Make: Dake, Model:7-015, Serial No.: 151766, Capacity: 75 Ton, Distance Between Uprights: 44”, Stroke Of Ram: 4.5”, Distance, Bed To Ram: 0-36”, Horz. Travel of Ram: 28”, Screw Adjustment: 7”, Dimensions: 60” x 48” x ...more
High Speed and Automatic Presses
3 Results
60 Ton, Bruderer #BSTA-60H, High-Speed Straight Side Precision Press, 3/4" -3" stroke, 12" max. feed width, 150-800 SPM
Category: High Speed and Automatic Presses
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Bruderer
Model: BSTA-60H
60 Ton Bruderer BSTA 60H High Speed Straight Side 4, Pillar Precision Press, 3/4″- 3″ STR, 150-800 SPM Vari, BBV 300/200 Feeder, 60 Ton Bruderer BSTA 60H High Speed Straight Side 4 Pillar Precision Press, 3/4″- 3″ STR, 150-800 SPM Vari, BBV 300/200 Feeder, LISTING, Type Presses, High Speed ...more
60 Ton, Bruderer #BSTA60H, high speed straight side press, 3" stroke, 150-800 SPM variable
Category: High Speed and Automatic Presses
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Bruderer
Model: BSTA60H
60 Ton Bruderer BSTA 60H High Speed Straight Side 4, Pillar Precision Press, 3/4″- 3″ STR, 150-800 SPM Vari, BBV 300/200 Feeder, 60 Ton Bruderer BSTA 60H High Speed Straight Side 4 Pillar Precision Press, 3/4″- 3″ STR, 150-800 SPM Vari, BBV 300/200 Feeder, LISTING, Type Presses, High Speed ...more
60 Ton, Bruderer #BSTA60H, high speed straight side, 4 pillar precision press, 3" stroke, 150-800 SPM variable
Category: High Speed and Automatic Presses
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Bruderer
Model: BSTA60H
60 Ton Bruderer BSTA 60H High Speed Straight Side 4, Pillar Precision Press, 3/4″- 3″ STR, 150-800 SPM Vari, BBV 300/200 Feeder, 60 Ton Bruderer BSTA 60H High Speed Straight Side 4 Pillar Precision Press, 3/4″- 3″ STR, 150-800 SPM Vari, BBV 300/200 Feeder, LISTING, Type Presses, High Speed ...more
Horizontal and Vertical Milling Machine
1 Result
Sharp #UH3, manual heavy duty vertical/horizontal milling machine, 11-13/16" x51-3/16" table
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Sharp
Model: UH3
Heavy Duty UH3 Vertical/Horizontal Mill, Model: UH3, Manufacturer: SHARP, Serial # 2H125, TABLE:, WORKING SURFACE: 51 3/16 in X 11 13/16 in, TRAVEL: 37 3/8 in X 14 13/16 in X 18 1/2 in, T-SLOT (NOMINAL SIZE X NO. X PITCH) : 5/8 in X 3 in X 2 3/4 in, FEEDS, VERTICAL (12 STEPS): 1/4 – 12 7/16 IPM, FEEDS ...more
Horizontal Band Saws
3 Results
9" x 16" DoAll #C916A, automatic horizontal band saw, 158" x 1" blade, hydraulic head elevation, 2006
Category: Horizontal Band Saws
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Doall
Model: C916A
Year: 2006
Here We Have:, DoALL Model C916A Automatic Horiz. Bandsaw, 9″ X 16″ Capacity, MAKE: DoALL, MODEL: C916A, SERIAL: 547-06309, NEW IN: 2006, CAPACITY: 9″ X 16″, CAPACITY ROUNDS: 10-3/4″, BLADE SPEEDS: 105 TO 275 FPM VARIABLE, WIDTH OF BLADE: 1″, LENGTH OF BLADE: 158″, HEAD ...more
10.59" DoAll #DS-260SA, miter horizontal band saw, 1.5 HP, hydraulic return, 2022, new
Category: Horizontal Band Saws
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Doall
Model: DS-260SA
Year: 2022
Here We Have:, DoAll Model: DS-260SA Miter Horizontal Band Saw New, New Never Used, Model: DS-260SA, S/N DS-260003, Year Mfg: 2022, Motor Hp: 1.5, Return: Hydraulic, Miter Adjustment: Dual Swivel Head, Miter Angle: 0 – 60°, 45°L, Motor: High Torque 1.1Kw (AC), Capacity Round 90 x 45 x 60 x 45L: ...more
13-1/2" Ellis #4000, Double Miter Horizontal Band Saw, 150" x 1-1/4" blade, 60-180 FPM, 2 HP, hydraulic adjusting feed, 220 Volt, 1PH
Category: Horizontal Band Saws
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Ellis
Model: 4000
New Ellis Model 4000 (Double) Miter Band Saw 220 Volt Single Phase, With: Vise Quick Adjusting Screw Type, Stock Gauge With Micro Adjust, Air Cooling System, No Additional Cost, Capacity, (90° & 45°) 13-1/2” Round at 90°, 12” Pipe at 90°, 22” Flat at 90°, 13” H x ...more
120 Ton, Strippit LVD #120BH08-CAD-CNC, press brake, Cadman 5-Axis CNC Control, 8' overall, 80" between housing, 2000
Category: Hydraulic Press Brakes
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Strippit
Model: 120BH08-CAD-CNC
Year: 2000
HERE WE HAVE:, 120 TON 8’, 5 AXIS STRIPPIT LVD PRESS BRAKE, MAKE: STRIPPIT LVD, MODEL:120 BH 08 CAD-CNC, SERIAL NUMBER: 27488, NEW IN: 2000, – 24 HP MOTOR, – 271 IPM RETURN SPEED, – 28 IPM BENDING SPEED, – 307 IPM APPROACH SPEED, – 15.7″ STROKE LENGTH, – 15.7″ OPEN ...more
Hydraulic Shears
1 Result
52" x 16 gauge National #NH5216, Hydraulic Sheet Metal Shear, 20 gauge @ 55,000 psi mild steel, 25 SPM, 24-gallon oil tank, 1PH
Category: Hydraulic Shears
Seller: Naab Sales Corporation
Location: Blaine, MN
Model: NH5216
Here We Have:, National 52”. x 16 Ga. Hydraulic Shear – NH5216 1 PHASE, Make: National Made in USA, Model: NH5216, Capacity, Mild Steel – 16 Gauge @ 55,000 PSI Tensile Rating, Capacity, Stainless Steel – 20 Gauge @ 55,000 PSI Tensile Rating, Maximum Working Length – 52″, Strokes per ...more
3" x 3" x 5/16" Peddinghaus, Universal Ironworker, 38 ton, 36 SPM, 2 HP motor, 220 Volts, 3PH
Category: Ironworkers
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Peddinghaus
Here We Have:, Well Tooled 38 Ton Peddinghaus “Peddy” Universal Ironworker, Make: Peddinghaus, Options On This Machine:, Punch Station: Cap. 9/16” Dia. x 3/8” Thick, Plate Shear: 6”.875” Cap. 6” x ¼” or 4”x 3/8” Thick, Angle Shear: ...more
3" x 3" x 3/8" Uni-Hydro #45-14, hydraulic 3 station ironworker, 45 ton, 6" throat, new
Category: Ironworkers
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Uni-Hydro
Model: 45-14
NEW Uni-Hydro 45 Ton Ironworker, 1 PHASE 220v, Uni-Hydro’s Model 45-14 is a rugged and compact three station ironworker that has been the signature machine for our company since 1980., Today, it’s still the industry’s leader in capacity, quality of cuts, power, versatility and affordability., This ...more
3" x 3" x 3/8" Uni-Hydro #45-14, 3-Station Hydraulic Ironworker, 45 ton, 14" bar shear, 6" throat depth, 4-sided blades, 220 Volt, 1PH
Category: Ironworkers
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Uni-Hydro
Model: 45-14
3" x 3" x 3/8" Uni-Hydro #ST56, Ironworker, 56 ton, Super Turret, 10-station, 6" throat, 7 SPM, 1200 psi, 5 HP, 220 Volt, 1PH
Category: Ironworkers
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Uni-Hydro
Model: ST56
Here We Have:, NEW Uni-Hydro 56 Ton Super Turret 10 STATION Ironworker, 1 PHASE 220v, SERIAL #, 1 PHASE 220v, This is What’s INCLUDED With The Machine You Are Buying:, INCLUDED 56 Ton Super Turret, 1 Phase, INCLUDED SLUG TYPE ANGLE SHEAR: 3”X3”X3/8” $1300 Option, INCLUDED SQUARE NOTCHER: ...more
4" x 4" x 3/8" Uni-Hydro #Pro-56-14, hydraulic ironworker, 56 ton, new
Category: Ironworkers
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Uni-Hydro
Model: PRO-56-14
Here We Have:, Uni-Hydro Hydraulic Ironworker PRO 56 220v 1ph, OPTIONS INCLUDED IN YOUR PRICE:, Square Notcher in 4th Station $1500, Slug Type Angle Shear 3x3x3/8” T40-56) $1300, 10 Pack Punches and Die Sets $480, Bar Shear Table $350, Grease Bank $175, $3805 In Options, Standard Equipment, 6″ Open throat ...more
6" x 6" x 1/2" Scotchman #12012-24M, Hydraulic Ironworker, 120 ton, 24" bar shear, 12" throat depth, 2.25" punch stroke, 47 SPM, 5 HP, 460 Volt, 1996
Category: Ironworkers
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Scotchman
Model: 12012-24M
Year: 1996
Scotchman 12012-24M 120 Ton Hydraulic Ironworker w/ Attachments, Make: Scotchman, Model: 12012-24M, Serial Number: 50508M496, New in: 1996, Punch Capacity: 120 Ton, Throat Depth: 12”, Universal Open Tooling Station, 24” Bar Shear: 1” x 12” Cap., ½” x 24” Cap., Punch Station: ...more
6" x 6" x 1/2" Uni-Hydro #Pro-80-24 hydraulic ironworker, 80 ton, 9" throat, new in stock
Category: Ironworkers
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Uni-Hydro
Model: PRO-80-24
Here We Have:, NEW in Stock Uni-Hydro Hydraulic Ironworker PRO 80 Ton 220v 1ph, SERIAL #, THIS MACHINE AS IT SITS:, SLUG TYPE ANGLE SHEAR 6 X 6 X1/2 $2600.00 Option, SQUARE NOTCHER 4TH STATION 2”x3”x3/8” $1800.00 Option, TEN PACK L SERIES PUNCH & DIE SETS $480.00 Option, PUNCH NUT WRENCH 100 ...more
6" x 6" x 1/2" Uni-Hydro #Pro-125, ironworker, 125 ton, 7.5 HP, 220 V., 1 phase, new
Category: Ironworkers
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Uni-Hydro
Model: PRO-125
Here We Have:, NEW Uni-Hydro Pro 125 Ironworker, 1 Phase 220 Volt, 7.5HP, Make: Uni-Hydro, Model: P125, Serial #: P1, 1 Phase 220V, What’s Included:, Included Angle Shear: 6 x 6 x ½ $2600.00, Included 4th Station: Rectangle Notcher, 3-1/4 Wide x 3 Deep x 3/8 Th. $1900.00, Included Punch Table Adj. Jig ...more
Uni-Hydro #45-14, compact 3 station ironworker, 45 ton, 1 phase, 220 V., loaded, new
Category: Ironworkers
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Uni-Hydro
Model: 45-14
Here We Have:, NEW Loaded Uni-Hydro 45 Ton Ironworker, 1 PHASE 220v, Here’s What’s On This Ironworker, 45 TON IRONWORKER, 1 PHASE 220 VOLT 3 HORSE, 9” BRAKE: 1300.00, PUNCH ADJUSTABLE JIG TABLE: 300.00, BAR SHEAR TABLE: 350.00, GREASE BANK KIT: 175.00, TEN PACK 100 ROUND PUNCHES & DIES: 480.00 ...more
Uni-Hydro #5624, ironworker, 56 ton, 9" throat, manual punch aligner, built for forklift handling
Category: Ironworkers
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Uni-Hydro
Model: 5624
Here We Have:, New Uni-Hydro 56 Ton (5624) Ironworker, 1 Phase 220v, Optioned as Shown, Grease Bank Kit Standard, Bar Shear Table Standard, Over Sized Punch and Die Kit $290.00 Option, 10 Pack Punch and Die Starter Set $480.00 Option, Punch Nut Wrench $25.00 Option, OPTIONS: $795.00, In building the 5624 Chuck Dvorak ...more
Uni-Hydro #P56-14, hydraulic ironworker, 56 ton, free 9" brake, 2800.00 in options, new
Category: Ironworkers
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Uni-Hydro
Model: P56-14
Here We Have:, NEW IN STOCK Uni-Hydro Hydraulic Ironworker PRO 56 Ton 220v 1ph, Uni-Hydro Hydraulic Ironworker PRO 56 220v 1ph, Make: Uni-Hydro, Model: P56-14, Serial #:, OPTIONS INCLUDED IN YOUR PRICE:, Square Notcher in 4th Station $1500, 9” Brake ¼” Capacity $1300, 10 Pack Punches and Die Sets ...more
Ellis #4000, double miter band saw with vise quick adjusting screw type, new
Category: Miter Saws
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Ellis
Model: 4000
New Ellis Model 4000 (Double) Miter Band Saw 220 Volt Single Phase, With: Vise Quick Adjusting Screw Type, Stock Gauge With Micro Adjust, Air Cooling System, No Additional Cost, Capacity, (90° & 45°) 13-1/2” Round at 90°, 12” Pipe at 90°, 22” Flat at 90°, 13” H x ...more
Press Accessories and Parts
1 Result
Wilson 12' Express Rail, hydraulic punch holder, converts American style tooling press brake, to Willa Trumpf style tooling
Category: Press Accessories and Parts
Seller: Naab Sales Corporation
Location: Blaine, MN
Model: WILSON 12' EXPRESS RAIL
Here We Have:, Wilson 12’ Express Rail, Hydraulic Punch Holder, Converts American Style Tooling Press Brake, to Willa Trumpf Style Tooling., Note: if one has a press brake with Willa/Trumpf and wants to add Hydraulic top clamping you can change out the top tang to willa/trumpf, Hydraulicly Operated Top Rail ...more
5' -17" Sharp #RD-1600, Radial Drill Press, 27.62" L x 19.62" width x 15.75" H table, 2.63" cast iron drilling capacity, 7.37" cast iron boring capacity, 14.56" spindle stroke, 2013
Category: Radial Drills
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Sharp
Model: RD-1600
Year: 2013
Sharp #RD-1600, box table, coolant system, built-in automatic tool ejector, automatic spindle reverse for tapping, 2013
Category: Radial Drills
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Sharp
Model: RD-1600
Year: 2013
Here We Have:, Sharp Radial Drill Model RD-1600 New in 2013, Make: Sharp Industries, Model: RD-1600, Serial Number: 20011, New in: 2013, 17” column diameter, MT#5 spindle, 7.5 HP motor, 63” column to spindle center, Drilling : 2.63” cast iron, 2.25” steel, Boring : 7.37” cast iron ...more
Reciprocating Surface Grinders - Horizontal Spindle
3 Results
6" x 12" Chevalier #Super-612, Hand Feed Surface Grinder, 8" x 1/2" x 1-1/4" abrasive wheel, 2 HP spindle motor, 3450 RPM, Futaba Pulscale 2-Axis digital read out, 1988
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Chevalier
Model: SUPER-612
Year: 1988
Chevalier Super-612 Hand Feed Surface Grinder w/ 2-Axis DRO, Make: Chevalier, Model: Super-612, S/N 018-0064, Year: 1988, Table Area: 6” x 12”, Abrasive Wheel Size: 8” x ½” x 1-1/4”, Max Distance Table Surface – Centerline: 20”, Cross Travel Handwheel Per Revolution: ...more
7" x 19.7" Mitsui #618PC-NC, 3-Axis fully automatic, Teachable & programmable surface grinder, 2006
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Mitsui
Model: 618PC-NC
Year: 2006
Here We Have:, 618 Mitsui 618PC-NC, 3 Axis Fully Automatic, Teachable & Programmable Surface Grinder, 3 Axis Simultaneous Controlled, PC Motion NC Touch Screen Control, Complete with Stainless Steel Coolant Tank & Pump, Make: Mitsui, Model: 618PC-NC, Serial Number: 2006079037, New in: 2006 Owner states 200 ...more
9" x 20" Chevalier #FSG-818SP, Hand Feed Surface Grinder, 8" x 18" table, 2 HP spindle motor, 3450 RPM, Fagor 2-Axis digital read out, 2018
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Chevalier
Model: FSG-818SP
Year: 2018
2018 Chevalier FSG-818SP Hand Feed Surface Grinder w/ 2 Axis DRO, Make: Chevalier, Model: FSG-818SP, S/N FA6179002, Year: 2018, Table Size: 8” x 18”, Max Grind Length Longitudinal: 20”, Max Grind Width Crosswise: 9”, Max Distance From Table Surface To Centerline: 20”, Cross Traverse ...more
Reciprocating Surface Grinders - Vertical Spindle
1 Result
9" x 20" Chevalier #FSG-818SP, Hand Feed Surface Grinder, 8" x 18" table, 8" x 1/2" x 1-1/4" wheel, 2 HP, 3450 RPM, Fagor 2-axis digital read out, 230 Volt, 3PH, 2018
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Chevalier
Model: FSG-818SP
Year: 2018
2018 Chevalier FSG-818SP Hand Feed Surface Grinder w/ 2 Axis DRO, Make: Chevalier, Model: FSG-818SP, S/N FA6179002, Year: 2018, Table Size: 8” x 18”, Max Grind Length Longitudinal: 20”, Max Grind Width Crosswise: 9”, Max Distance From Table Surface To Centerline: 20”, Cross Traverse ...more
Single Crank OBI Flywheel Press Machines
2 Results
32 Ton, Federal #32, Single Crank Flywheel Driven OBI Press, 3" stroke, 9.5" shut height, 2" slide adjustment, 15" x 24" bed, air clutch, 1973, (2 available)
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Federal
Model: 32
Year: 1973
Here We Have:, Federal Flywheel Driven OBI Press, Model 32, 32 Ton Capacity, Air Clutch & Variable Speed, Make: Federal, Model: 32, S/N: 32-251, Year: 1973, 32 Ton Capacity, 3” Stroke Of Ram, 9.5” Shut Height To Bed (SDAU), 2” Slide Adjustment, 15” x 24” Bed Area, 15” x ...more
110 Ton, Bliss #C-110, Flywheel OBI Press, w/Air Clutch, 42" x 27" Bed Area, 27.5" x 21" Ram Area, 6" Ram Stroke, 80 SPM, 1967
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Bliss
Model: C-110
Year: 1967
Here We Have:, Bliss Flywheel Type OBI Press, Model C-110, 110 Ton Capacity, Air Clutch, Make: Bliss, Model: C-110, S/N HP45410 H58202, Year: 1967, 110 Ton Capacity, 6” Stroke Of Ram, 21” Shut Height To Bed (SDAU), 4” Ram Adjustment, 42” x 27” Bed Area, 27.5” x 21” Ram Area ...more
Single Cranked Back Gear OBI Press Machines
1 Result
32 Ton, Federal #32, OBI Back Geared Punch Press, 15" x 24" bed, 3" stroke, 9.5" shut height, 2" slide adjustment, 30-70 SPM, Yaskawa variable frequency drive, 1973
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Federal
Model: 32
Year: 1973
Here We Have:, Federal Back Gear Driven OBI Press, Model 32, 32 Ton Capacity, Air Clutch & Variable Speed #32-259, Make: Federal, Model: 32, S/N: 32-259, Year: 1973, 32 Ton Capacity, 3” Stroke Of Ram, 9.5” Shut Height To Bed (SDAU), 2” Slide Adjustment, 15” x 24” Bed Area, 15” x ...more
18-1/8" Ellis #9400, Drill Press, 5-3/8" sprindle travel, 3" quill, 4" column diameter, 3/4" tapping, 2 HP, 1200 RPM, 220 Volt, 1PH
Category: Single Spindle Drill Presses
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Ellis
Model: 9400
New Ellis Model 9400 Drill Press, With: Power Down Feed, infinitely variable speed by turning the dial, Complete With: ¾” Chuck and 6” Vise, MOTOR 2HP A.C. Single Phase 220V, CONTROL BOX, Infinitely variable speed by turning the dial, Electronic reversing, Full torque at low speeds, All solid state ...more
Vertical Band Saws
1 Result
14" x 6" Wilton #8014, Vertical Bandsaw w/ Blade Welder, 19-1/2" x 21-1/4" table, 108" L x 1/2" width blade, 1 HP, 98-394 FPM, 220 Volt, 3PH
Category: Vertical Band Saws
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Wilton
Model: 8014
Here We Have:, Wilton Model 8014 Vertical Bandsaw W/ Blade Welder, Extra Blades, Make: Wilton, Model: 8014, Serial Number: 811071, Throat Depth: 14.1875”, Cutting Height: 6.0625”, Table Size: 19.5”x21.25”, Blade Sizes:.125”-.5”, Blade Length: 108”, Speed Adjust Variable: ...more
Vertical CNC Machining Centers
3 Results
Clausing Kondia #FV-1, Vertical Milling Machine, 30" X, 15" Y, 16.5" Z, 23" ram travel, 3 HP, 4000 RPM, 3-axis Sony digital read out, 220 Volt, 3PH
Category: Vertical CNC Machining Centers
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Kondia
Model: FV-1
Clausing Kondia Model FV-1 Vertical Milling Machine W/ 3- Axis Sony DRO, Make: Clausing Kondia, Model: FV-1, Serial # AC 166, Size of table 9” x 48”, Longitudinal travel 30”, Saddle travel 15”, Knee travel 16 ½”, Ram travel 23”, Quill travel 5”, Throat distances ...more
Sharp #SV-2414-SF-F, 3-Axis CNC Vertical Machining Center, 28" x 13.8" table, 24" X, 14" Y, 18" Z, 10 HP, 10,000 RPM, 10 automatic tool changer, CAT 40, Fanuc Oi-Mate-MD, 240 Volt, 3PH, 2013
Category: Vertical CNC Machining Centers
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Sharp
Model: SV-2414-SF-F
Year: 2013
Sharp #SV-2414SF-F, 3-Axis CNC vertical machining center, Fanuc 0i-Mate-MD, 24" X, 14" Y, 18" Z, 10000 RPM, 10 automatic tool changer, 2013
Category: Vertical CNC Machining Centers
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Sharp
Model: SV-2414SF-F
Year: 2013
Here We Have:, Sharp 3 Axis VMC Model SV-2414 SF-F, Make: Sharp, Model: SV-2414 SF-F, Serial Number: 6010, Year: 2013-12, Control: FANUC OI-MATE-MD, Cutting Time: 5248 Hrs., X: 24″, Y: 14″, Z: 18″, Spindle: 10 Hp, RPM: 10,000 RPM, # ATC: 10, Taper: CAT-40, Table-W: 13.8″, Table-L: 28″ ...more
