Buy or Sell Your Vertical Press

(2 Available), BLANCHARD 11-16, Chuck Size. 16", Horz/Vert. Vert, Power. 15 hp.

Pre Owned Wysong RT4-175X146 CNC Hydraulic Press Brake, Serial Number RT18-104-A, Capacity 175 Tos, Overall Length of Bed & Ram 12’, Distance Between Housings 10’6”, Open Height 20”, Stroke 8”, Shut Height (SDAU) 12”, Throat 8”, Oil Capacity US Gallons, Back Gauge Range ...more

One (1) Used McNeil Tire Tyre Bladder Press, Model 900 - 36 x 30, closing force 900,000 lbs (450 tons), ram diameter 24", distance between side plates 36", mold height 20-30", max bladder size 26x26", max tire corresponding to max bladder 11.00 x 22, max mold OD 35.5", max press opening ...more

PROMECAM RG-80-30 used hydraulic brake available. Ideal for precision sheet metal bending tasks. Well-known for its reliability and performance in demanding environments. Secure this essential tool for your workshop today., Brand: Promecam, Model: RG 80-30, Capacity: 88 tons, Bending length: 10', Distance between ...more

Cintiversal Universal Mill, Knee Type Milling Machine, Table Size 1300 x 300mm 51" x 12", X axis travel 1000mm 39.3", Y axis travel 360mm 14", Z axis travel 450mm 17.7", X,Y Feed Rate 2500 mm/min 100ipm, X,Z Feed Rate 2500 mm/min 100ipm, Spindle speeds 16 steps: 75 to 3600rpm, Quill Travel 140mm 5.5", Quill Feed 3 ...more

50 Ton H-Frame Press, Asset # 12086, Tonnage 55 Tons, Width between Uprights 36”, Table Height Adjustment 3”, Minimum Ram to Table 0”, Maximum Ram to Table 24”, Width between Table Channels 10 ½”, Press Dimensions 52” x 24”, Height 74”, Preliminary – Subject ...more

TSB 25TSB 35 Working Area Drilling capacity 0.98 in 1.38 in Tapping capacity, steel M 16 M 22 Foot set up area (length x width) 12x13 in 15x14 in Vertical head travel 19 in 20 in Spindle nose-to-foot distance 26 in 25 in Throat 9 in 13 in Column diameter 4 in 5 in Headstock Spindle speed (6) 125 - 2,825 rpm (12) 125 - ...more

38 TON AIDA SINGLE CRANK GAP FRAME PRESS, Model NC1-350, S/N 10403-0490, New 2010, Stock# Q11678, Aida Press Control, LINK System 1100 Tonnage Monitor, Dual Palm Buttons, Inch / Single / Continuous Modes, Light Curtains., CATALOG :Tonnage Capacity 38 Ton Blanking Capacity 30 Ton Stroke Length 1.96" Adjustment 1.96" ...more

SKU: 152382, Model: 71008, Year: 2009, Condition: Used, S/N: 10356, Bed Length: 8', Tons: 100 ton, Brake Type: Hydraulic, CNC: Yes, Electrical :, Voltage: 575 volts, Phase: 3-phase, Made In: UNITED STATES, Dimensions: 88.00 (H) x 48.00 (W) x 102.00 (L) inches, Additional :, Control voltage: 120 volts, Hydraulic ...more

Make: Magnum Press, Model: MSS4PS600-2021119, Year: 2021, Machine Location: Upon Request, Capacity: 600 Tons, Daylight: 54″, Stroke: 42”, Slide Area: 60″ x 48″, Bolster Area: 60″ x 48″, Side Window: ?, Rapid Advance: 500 ipm, Pressing: 30 ipm, Retract: 500 ipm, Main Motor: 100 HP ...more

This listing is for a NEW ESTIC SPC020-20., Compact servo press designed for precision industrial applications. Ideal for automation systems requiring accurate load, position, and speed control. Energy-efficient and low-noise operation., See photos for., Part No: SPC020-20, Type: Compact Servo Press, Condition: NEW ...more

, Model Number: HFP-200, Manufacturer: MachineCo (Canadian Press Division), Power: 10 HP, 3 Phase, Bore: 12″, Stroke: 20″, Ram speed: Advance – 24 IPM, Press – 6 IPM, Return – 29 IPM, Capacity: 200 Tons, Weight: 7,400 lbs, Dimensions: 58″ Length x 97″ Width x 108″ ...more

, Model Number: HFP-250, Manufacturer: MachineCo (Canadian Press Division), Power: 10 HP, 3 Phase, Bore: 12″, Stroke: 20″, Ram speed: Advance – 22 IPM, Press – 4 IPM, Return – 27 IPM, Capacity: 250 Tons, Weight: 8,200 lbs, Dimensions: 58″ Length x 97″ Width x 108″ ...more

SERIAL. 27260, MODEL. CUTMASTER, DIAMETER OF 4 JAW CHUCK. 42", MAXIMUM SWING. 54", SWING WITH SIDE HEAD IN WORKING POSITION. 45" MAXIMUM, MAXIMUM UNDER RAIL. 37", MAXIMUM UNDER TURRET FACE. 48-1/4", TABLE SPEEDS. (20) 4.11 TO 150 RPM, FEEDS. (16).004 TO.500IPR, 5 POSITION TURRET HEAD ON RAIL. YES, HORIZONTAL TRAVEL OF ...more

STANDARD INDUSTRIAL AB150-10 Hydraulic Press Brake: -- Forming / Punching 150 / 100 Tons -- Bed/Ram Length 10 ft -- Between Frames 8'-5" -- Open Height 13 in. -- Stroke 6 in. (fully adjustable) -- Closed Height 7 in. --Throat Depth 10 in -- Bed width 5" -- Bed height 38" -- Horsepower 20 -- Ram speed approach 109 ...more

- 1200mm Gasketed Filter Press Plates, - 56 x 75 Size Press Plates, - 70 Cubic Foot x 90 Cubic Foot Capacity, - 21 ft. Long x 6 ft. Wide x 7 ft. Tall, - Automatic Hydraulics, - Center Feed with 4 Corner Return, - 1-3-1 Button Design for Air Blow Down, - Semi-automatic Plate Shifter, - To be Supplied fully ...more

10" X 50"31"16.3"15.3"RAPID4500 RPM, VARIABLER85"18.5"3 HP1/2 HP1/8 HP575V/3/602,750 LBS.

Principal :, PRESSING FORCE-MAIN SLIDE, 500 Ton full tonnage pressing, 100 Ton low tonnage pressing, 55" Ton return capacity @ 3500 P.S.I., 17" Diameter main ram diameter (single acting), 6-4" Closing & return rams (double acting)**, 3537 PSI System pressure, **By selector switch setting closing rams only using ...more

#205-12 CINCINNATI-MILACRON "CINOVA 80" PLAIN, HORIZONTAL MILL w/INDEPENDANT OVERHEAD SPINDLE - #30581, Serial No 31422P5V-4, Model CINOVA 80, Ltr DH, Sony "Trak" 2-Axis Digital Readouts, Independant Overhead Vertical Head Spindle, Knee Motor - Extra Arbors, Coolant System (Built-In), CATALOG :, Table Dimensions ...more

SERIAL. 9461, MODEL. JL55-8, CAPACITY. 55 TON, OVERALL LENGTH OF BED & RAM. 8', DISTANCE BETWEEN HOUSING. 6'6-3/4", STROKE. 6", OPEN HEIGHT. 12", CLOSED HEIGHT. 6", THROAT DEPTH. 6", BED WIDTH. 4", PASS LINE HEIGHT. 32", ELECTRIC FOOT PEDAL. YES, DUAL PALM BUTTONS. YES, RAN SPEED RAPID ADVANCE. 130 IPM ...more

SEIKI-XL VERTICAL MILL, Table Dimensions (Overall, W x L). 10" x 50", Table Working Surface, W X L. 10" x 50", Longitudinal Table Travel (X-Axis). 30", Cross Saddle Travel (Y-Axis). 12", Vertical Knee Travel (W-Axis). 16", Vertical Head Travel (Z-Axis). 5", Spindle Speeds. 60-4200 RPM, Table Feeds.75 - 35 IPM, Motor ...more

SERIAL. 43955, MODEL. OBS, CAPACITY. 110 TONS, STROKE OF RAM. 10", RAM DIAMETER. 8", RAM ADVANCE SPEEDS. 600 / 150 IPM, RAM PRESSING SPEED. 60 IPM, RAM RETURN SPEED. 600 / 350 IPM, THROAT DEPTH. 25", POWERED CLAMPS ON BED. YES, AIR CUSHION ON BED. YES, CUSHION PRESSURE. ADJUSTABLE WITH READOUT, RUN MODES. INCH, SINGLE ...more

Make: Accurl, Model: Master, Year: 2025, Machine Location: Upon Request, Upgraded Delem DA66S CNC Control, Upgraded Open Height & Stroke, Upgraded ECO Energy Savings Drive Standby Inverter, Y1/Y2 Upper Ram, X/R, Z1/Z2 Servo Backgauge, CNC Crowning System, Complete Set of Upper AND Lower tooling (4-way die) ...more

SERIAL. 46466, MODEL. 90AFX10, YEAR NEW. 1990, OVERALL LENGTH OF BED. 12', DISTANCE BETWEEN HOUSINGS. 10'6", STROKE. 10", OPEN HEIGHT. 17", CLOSED HEIGHT. 7", THROAT. 8", RAM SPEED RAPID. 380 IPM, RAM SPEED RETURN. 1 TO 405 IPM, RAM SPEED PRESSING. 1 TO 120 IPM, CINCINNATI AUTO FORM CNC BACK GAUGES. 6 AXIS ...more

The Aida NC2-200 (1987) 200-Ton Two Point Mechanical Gap Frame Stamping Press is built for heavy-duty sheet metal fabrication. Designed to handle wide workpieces and off-center loads, it is ideal for automotive, electronics, and industrial manufacturing. This versatile press performs blanking, punching, forming, and ...more

GANNOMAT - CONCEPT 70 ECO PLUS: Case Clamp (Semi-Automatic): -- Multipurpose Case Clamp with: Interlocking vertical & horizontal pressure beams specially designed to save time & labor. -- Clamping pressure is applied across the entire vertical & horizontal beams for clamping of case goods, drawers, etc. -- ...more

SERIAL #6-7374, MODEL #3CSM, WORKING SURFACE OF TABLE. 64" X 13-1/2", SPINDLE SPEEDS. (16) 25 TO 1250 RPM, VERTICAL SPINDLE SPEEDS. 100 TO 1600 RPM, LONGITUDINAL AND CROSS FEEDS. (32) 3/8 TO 90 IPM, VERTICAL FEEDS. (32) 3/16 TO, 45 IPM, LONGITUDINAL TRAVEL. 34", CROSS TABLE TRAVEL. 12", VERTICAL KNEE TRAVEL. 17", LONG ...more

COMBINATION 100 TON H-FRAME PRESS & 12 TON C-FRAME BROACHING PRESSMODEL HFBP-100/12NEW - IN STOCK FOR IMMEDIATE DELIVERY H-FRAME :RATED CAPACITY. 100 TONS STROKE. 12" BORE. 8" RAM SPEED: ADVANCE. 20 IPM RETURN. 26 IPMDISTANCE BETWEEN POSTS (RIGHT TO LEFT). 42"DISTANCE BETWEEN POSTS (FRONT TO BACK). ...more

Tonnage forming/punching 200/133 Distance between housings 12'-5" Bed/ram length 14 feet Below grade no Weight 38000 pounds Bed height 38 inches Bed width 8 inches Overall height (approx.) 121 inches Throat depth 10 inches Ram stroke (fully adjustable) 8 inches Open height (maximum height) 14 inches Closed height ...more

800 Tons Williams & White Hydraulic Press Asset: L026, Capacity: 800 Ton, Serial Number: C-1818, Capacity: (Metric Tons) 800 Tons, Stroke: 44" - 1,117.6 mm, Closing Speed: 510 IPM, Fast Pressing Speed (480 Tons): 10-37 IPM, Pressure 1815, 480 Ton, Slow Pressing Speed (825 Tons): 10-24 IPM, Pressure 3120, 825 Ton ...more

(1) Used Nazel Model 4B Forging Hammer, Capacity: 4011# per square inch, 15 HP Motor, Foot treadle operation, The Hammer has been rebuilt., Press Weight: 11,000#, Anvil Weight: 4,000#, Remanufactured: 2020, The hammer has all New valves, New leather wipers on the ram, New wrist pin and bearings on the piston that ...more

SERIAL. 64-4222-A-976-1, MODEL. 550-20, TABLE AREA. 94-1/2" X 20", SPINDLE SPEEDS. 14 TO 1400 RPM, LONGITUDINAL & CROSS TABLE FEEDS. 3/8 TO 90 IPM, VERTICAL HEAD FEEDS. 3/16 TO 45 IPM, LONGITUDINAL TABLE TRAVEL. 50", CROSS TRAVEL OF TABLE. 18", VERTICAL HEAD TRAVEL. 18", SPINDLE TO TABLE. 2" MINIMUM 26" MAXIMUM ...more

and s as ordered new in 2024 never used, ------------------------------------------------------------------, Seyi 275 ton Double Crank Gap Frame Press ( NEW NEVER PUT IN PRODUCTION), -275 Tons US (250 metric) capacity, -9.84" (250mm) Stroke length, -0.28" (7mm) Tonnage capacity rating point, -21.65"(550mm) Die height ...more

Pre Owned Toyokoki HYB-125-30 CNC Hydraulic Press Brake, Serial Number: 4824, Capacity 110 Tons, Overall Length of Bed & Ram 118”, Distance Between Housings 100.3”, Open Height 13.38”, Stroke 7.87”, Throat 16.14”, Working Height 37”, Bed Width 7.4”, Back Gauge Range ...more

SERIAL. 3L1001, DEPTH OF THROAT. 14", SPINDLE SPEEDS. (12) 60 TO 1000 RPM, FEEDS. (9).005 TO.043 IPR, AREA OF TABLE. 30" X 25", SPINDLE TRAVEL. 10", DIAMETER OF SPINDLE. 4", TAPER IN SPINDLE. #4 MT, TRAVEL OF HEAD ON COLUMN. 12", VERTICAL TRAVEL OF TABLE. 10", DISTANCE SPINDLE TO TABLE. 0" TO 32", HORSEPOWER MAIN ...more

Overview, This International Cryogenics IC 500 Helium Dewar Storage Tank is designed for safe storage and transport of liquid helium in laboratory, medical, and industrial applications. Built with stainless steel construction and mounted on wheels for mobility, this UN 1963 certified dewar provides reliable cryogenic ...more

2" Stroke, 11" Shut Height Estimated, 2" Ram Adjustment, 150 SPM, 24" X 13" Bed, 10" X 7" Ram, Air Clutch, Air Brake, Press Commander Control, Palm Buttons, 7" Throat, 60" LR X 65" FB X 80" Tall, Estimated Weight 5000 LBS.