51 - 100 of 332 listings
2" Welex #200-24-1, single screw extruder
Platinum Asset Services | Scarborough, ON
Category: Extruders and Extrusion Lines
Seller: Platinum Asset Services
Location: Scarborough, ON
Mfr: Welex
Model: 200-24-1
WELEX, 200 24-1, 2", SINGLE SCREW EXTRUDER, WELEX 200 24:-1.
2.16" Leistritz #ZSE-50-GG, counter rotating twin screw extruder, 44:1 L/D, 62 HP Baumuller DC motor, 1997
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Leistritz
Model: ZSE 50 GG
Year: 1997
55MM Leistritz ZSE 50 GG Counter-Rotating Twin Screw Extruder 300 RPM Screw Speed 44:1 L/D Ratio 10 Barrel Sections, Water-Cooled Barrel, Non-Vented 46KW(62HP) Baumuller DC Motor, 112 AMPS DOES NOT INCLUDE DC DRIVE MISSING HALF OF BARREL HEATER IN ZONE 7 10 Barrel Zones, 3 Die Zones Eurotherm 2208e Controllers -SOME ...more
JUST ADDED!
2.28" Coperion #ZSK-58, Mega Compounder twin screw extruder, 58mm, 900 RPM, 34:1 L/D, 500 HP DC, 2002
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Coperion
Model: ZSK-58
Year: 2002
Used 58MM Coperion ZSK-58 Mega Compounder, 900 RPM Screw Speed, 34:1 L/D Flender Gearbox Directly Coupled To 500 HP DC Motor & Drive HMI Touchscreen Interface 500 HP GE DC Motor With GE DV-300 Drive 10 Barrel Sections, Electrically Heated, Water Cooled Barrel, Side Feeder Port In Section 4, Vented In Section 4 ...more
2.36" B & P Process Equipment Ko-Kneader System #CK-60-12D, 12:1 L/D, barrel vertically split
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: B & P
Model: CK-60-12D
used-b&p process equipment ko-kneader system, model ck-60-12d. system consists of: b&p ko-kneader, 60mm screw diameter, 12:1 l/d, barrel vertically split. cored shaft with segmented screw elements and liners, barrels are water heated cooled. 75 hp dc-motor with drive. screw speed up to 500 rpm; brabender type ...more
2.36" Battenfeld Cincinnati #Techbex-1-60-25D, single screw extruder, 25:1 L/D ratio, air cooled, RKC CH402 temperature controllers, 2013
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Battenfeld Cincinnati
Model: TECHBEX 1-60-25D
Year: 2013
Used 60MM(2.36") Battenfeld Cincinnati Extruder, Model Techbex 1-60-25D Single Screw Extruder, 25:1 L/D Ratio, Air Cooled 15.56:1 Nord 6282A2 2XHF/4 Gearbox, 30HP Nord AC Motor With 200XH/4F Drive, 119 Screw RPM, 4 Barrel Zones, 7 Die Zones AMP Gauge, Speed POT RKC CH402 Temperature Controllers Brand New MPI MPC9610 ...more
Get email updates for newly added Extruders and Extrusion Lines
Extruders and Extrusion Lines (also known as extrusion machines) are systems used to shape materials like plastic, rubber, or metal by forcing them through a die. Commonly used in industries like manufacturing, construction, and packaging, they are ideal for producing pipes, sheets, films, and profiles. Extruders and extrusion lines are essential for creating consistent, high-quality products in large volumes.
2.36" Berstorff, co-rotating twin screw extruder, 34:1 L/D ratio, 500 RPM screw speed, 200 HP Reliance VXS AC Inverter Duty motor, 1997
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Berstorff
Model: ZE 60A
Year: 1997
"60MM Berstorff Co-Rotating Twin Screw Extruder, 34:1 L/D Ratio, 500 RPM Screw Speed 7 Barrel Zones, Vented At Barrel Zone 4 and 6 1 Screen Changer Zone Electrically Heated, Water Cooled 200 HP Reliance VXS AC Inverter Duty Motor S/N 90-2-E0.8765/97 Order Number 1242 HUT New In 1997 No Drive Or Temperature Control ...more
2.36" Leistritz #ZSE-60-GL, Twin Screw Extruder, liquid cooled, 36:1 L/D, 150 HP, 9 zones, Side Stuffer, extra parts
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Leistritz
Model: ZSE-60-GL
used leistritz zse-60 gl twin screw extruder 36:1 l/d, 150 hp, side stuffer, strand dies, screws & spares. with (9) modular barrel sections. 114 kw / 150 hp baumueller dc motor, 500 rpm max. screw speed, barrels are electrically heated and internally cored for liquid cooling. includes stand-alone electrical ...more
2.36" Leistritz #ZSE-60-GL-36D, twin screw extruder, 36:1 L/D, 121 KW Baumuller Shunt Wound DC motor, 10 zone Control panel w/ Eurotherm 2208 temperature ctrlrs
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Leistritz
Model: ZSE-60-GL-36D
Used 60MM Leistritz ZSE 60 GL-36D Twin Screw Extruder, 121KW(162 HP) Co-Rotating 500 RPM Screw, 36:1 L/D Ratio, 9 Barrel Segments, With 40 MM Side Feeder Vent In Zone 4, Side Feeder In Zone 5 10 Zone Control Panel With Eurotherm 2208 Temperature Controllers 121KW(162) HP Baumuller Shunt Wound DC Motor Allen Bradley DC ...more
2.4" Leistritz #ZSE-60-MAX, Co-Rotating twin screw extruder, 62" L, 400 RPM, 20:1 L/D, liquid cooled, Sinamics Control, w/ wheels & adj feet, 480 V., 3 phase
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Leistritz
Model: ZSE-60-MAX
used leistritz 60mm zse maxx twin screw extruder, type zse60maxx-20d. (2) co-rotating screws approximately 2.44" diameter x 62" long. speed 400 rpm. approximate 20 to 1 l/d ratio. 4 barrel sections, 1 feed section. liquid heated and cooled. 4-cooling zones. screws driven by a 121kw (160hp), 1600 rpm motor thru a ...more
JUST ADDED!
2.4" Leistritz #ZSE-60-MAXX-36D, Twin Screw Extrusion Line, co-rotating, 60mm, Pelletizing System, 1200 RPM, 742 HP, 2014
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Leistritz
Model: ZSE-60-MAXX-36D
Year: 2014
used leistritz zse 60 maxx-36d twin screw extrusion line with pelletizing system 495 kw drive auction asset. line consists of (1) koch technik feeding system & scholz dosiertechnik dosing unit, (1) leistritz twin screw extruder, type zse 60 maxx-36d. (2) 60 mm) diameter screws. 36:1 l/d ratio. co-rotating. ...more
JUST ADDED!
2.4" Leistritz #ZSE-60-MAXX-44D, Twin Screw Extruder, 60 mm, 1200 RPM, 10 barrel, Co-Rotating, 2018
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Leistritz
Model: ZSE-60-MAXX-44D
Year: 2018
used- leistritz twin screw extruder, type zse 60 maxx-44d. (2) 60 mm) diameter screws. 44:1 l/d ratio. co-rotating. 10-barrel housing section electrically heated, water cooled. (2) degassing port. maximum screw speed 1200 rpm via a flender gearbox is direct driven via a 400volt/50cycle/3ph motor. incl. control panel. ...more
JUST ADDED!
2.4" Noris #ZSC-60, Twin Screw Extrusion Line, 650-800 kg/hr Polymer Compounding, water cooled, 746 RPM,
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Noris
Model: ZSC-60
used- noris zsc 60 twin screw extrusion line with a capacity of 650 800 kgs/hr. consisting of: noris zsc 60 twin screw extruder, (2) 60 mm diameter screws, 40:1 l/d ratio, co-rotating inter-meshing side by side screw design, (9) heated barrels, electrically heated water cooled. driven by a 400volt drive motor via a ...more
2.44" Maplan #DSK62, counter rotating conical twin screw extruder, 40 HP, 1990
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Maplan
Model: DSK62
Year: 1990
Used 62mm Maplan Counter Rotating Conical Twin Screw Extruder, Model DSK 62 4 Barrel Zones, Oil Zone, 7 Die Zones with Eurotherm 808 Temperature Controllers 72:1 Dorstener NSDEN 160 So Gearbox 40 HP Emerson Motor, ABB DCS 800 DC Drive 1 HP Starve Feeder 460/3/60 - 200 AMP Disconnect 40.5" Centerline Vented Barrel - ...more
JUST ADDED!
2.5" American Kuhne #AK-250-30:1-A/C-EXT, Extruder, 30:1 L/D, 460 V., 2006
HGR24 | Euclid, OH
Category: Extruders and Extrusion Lines
Seller: HGR24
Location: Euclid, OH
Mfr: American
Model: AK 250 30:1 A/C EXT
Year: 2006
Inventory No. 0626-081-0003 Manufacturer American Kuhne Model No. AK 250 30:1 A/C EXT Name Plastic Extruder Arrival Date 06-18-2026 Dimensions L x W x H (inches) 115 x 47 x 67 Capacity 2.5” SCREW Electrical 3/60/230/460 Weight (lb.) 3520 Category Plastics Condition Used Available Quantity 1 Serial No. 6500 Make ...more
JUST ADDED!
2.5" American Kuhne #AK-250-30-AC-40HP-ULT, co-extruder, 30:1 L/D, 5 barrel zones, 40 HP, 460 V., 2020
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: American Kuhne
Model: AK-250-30-AC
Year: 2020
Used 2.5" American Kuhne Model AK-250-30-AC-40HP ULT C0-Extruder 30:1 L/D Ratio, 5 Barrel Zones 57" Centerline 40 HP Marathon Motor Belt Driven S/S Barrel Cover Feed Throat: 5" L x 3.5" W 8 Downstream Zones Koellman UNEX4.2 Gearbox 17.85:1 Ratio, Input RPM 1750, Output RPM 98, Rating: 100, Service Factor: 1.6 S/N: ...more
2.5" Bonnot, Single Screw Extruder, 48" long jacketed, 1978
Quantum Technology | Shippensburg, PA
Category: Extruders and Extrusion Lines
Seller: Quantum Technology
Location: Shippensburg, PA
Mfr: Bonnot
Year: 1978
Item Dimensions - L X W X H - 78X36X56Item Weight-500lb1508AAExperience enhanced productivity with the Bonnot Single Screw Extruder, perfect for your manufacturing needs. This robust machine boasts a 2.5-inch diameter by 48-inch long screw, making it ideal for a variety of extrusion processes. The fully jacketed ...more
2.5" Davis Standard #250SII, single screw extruder
Aucto | San Francisco, CA
Category: Extruders and Extrusion Lines
Seller: Aucto
Location: Spring Lake, MI
Mfr: Davis Standard
Model: 250SII
2.5" Davis Standard #25IN25, Thermatic Single Screw Extruder, Air Cooled, (4) Barrel Zones, 25:1 L/D, 3.5" x 3.5" Feed Throat, 40 HP, 1985
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 25IN25
Year: 1985
Used 2.5" Davis Standard Thermatic, Single Screw Extruder, Model 25IN25, 24:1 L/D Air Cooled, 4 Barrel Zones 3.5" x 3.5" Feed Throat Gear Reducer, Ratio 17.26:1 Hes 301 System, Dynisco UPR800 Melt Pressure Gauge, Newport Digital Screw RPM And Motor Amp Gauges Speed POT, Start/Stop Push Buttons, Alarm/Silence, Barrel ...more
2.5" Davis Standard #25IN25, cold feed rubber extruder, 20:1 L/D, 17.26:1 G/B, 40 HP, 1994
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Davis Standard
Model: 25IN25
Year: 1994
One (1) DS Davis Standard 2.5" 60mm Cold Feed Rubber Extruder, Model 25IN25, 20:1 L/D, 17.26:1 G/B ratio, Reliance 40 HP 1185 RPM 460 VAC motor, VFD variable frequency drive, control panel, clamp assembly, forced lube system, clutch driven roller feeder assembly, PFR power feed roll, adjustable scraper blade ...more
2.5" Davis Standard #DS2.5MS, extruder, 24:1 L/D, Air Cooled, 40 HP DC motor, 1985
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: DS2.5MS
Year: 1985
Used 2.5" Davis Standard Extruder, 24:1 L/D, Air Cooled, 40 Hp DC Motor, Belt Driven (60Hp Gearbox Capacity, With 1.25 S.F.) 3 Barrel Zones, 2 Die Zones 42" Centerline Bardac DC Drive, PowerPLX 40/99 7.42/1 Gearbox Ratio 460/3/60, 106A Watlow Temperature Controllers, Mercury Relays, Amp Meter, RPM Gauge With Clamp And ...more
2.5" Davis Standard #SB250, Super Blue Extruder, 24:1 L/D, 40 HP, Air-Cooled, 4 Barrel Zones, SSD Drive, Belt Driven, 2006
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: SB250
Year: 2006
Used 2.5" Davis Standard Extruder, Model SB250, 24:1 L/D Ratio, Air Cooled, SSD Drive 17.26:1 Gearbox Ratio, Belt Driven, 4 Barrel Zones, 2 Die Zones Centerline Height: 42" Gearbox Rated For 160 HP 40 HP Reliance AC Motor, Dual Speed 1760 RPM @ 60Hz / 2560 RPM @ 120Hz AC Integrator 690+ Series SSD Drive, S/N: ...more
JUST ADDED!
2-1/2" Davis Standard #Super-Blue, extruder, 24:1 L/D, air cooled, 40 HP, PLC touch screen, 2009
KD Machinery | Scottsdale, AZ
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Davis Standard
Model: SUPER BLUE
Year: 2009
Used Davis Standard Super Blue (2009) Extruder for Sale. This pre-owned Davis Standard plastic extruder is located in The United States and available to be seen under power for an inspection. If you have any questions regarding this Davis Standard Extruder, please feel free to contact us. You may Activate Pricing to ...more
2.5" Davis Standard, shank style extruder screw, 24:1 L/D, mixing pins
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
2.5" Davis Standard Extruder Screw, 24:1, Davis Standard Style Shank With Mixing Pins 76" Overall Length.
2.5" Davis Standard, shank style extruder screw, 24:1 L/D, Maddox mixer
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
2.5" Davis Standard Extruder Screw, 24:1, Davis Standard Style Shank With Maddox Mixer 76" Overall Length.
2.5" Davis Standard, shank style extruder screw, 24:1 L/D, mixing pins
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
2.5" Davis Standard Extruder Screw, 24:1, Davis Standard Style Shank With Mixing Pins 76" Overall Length.
2.5" Gloucester #2522, single screw extruder, R2, 32:1 L/D, 72" centerline height, 10.73:1 gearbox ratio
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Gloucester
Model: 2522
used-gloucester model 2522 r2 2.5" 32:1 l/d extruder with an electrically heated, water cooled (closed loop) vented and plugged barrel at approximately a 72" centerline height. gearbox has a reduction ratio of 10.73:1 and is direct driven by a 60 hp d/c motor with saftronics scr control. manual screen changer mounted ...more
2.5" Gloucester Engineering #25225R2, extruder, 32:1, electrically heated, air cooled, non-vented barrel
Global Equipment International | Chalfont, PA
Category: Extruders and Extrusion Lines
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Gloucester
Model: 25225R2
Year: 2011
Used Gloucester Engineering Extruder 2.5", 32:1. Electrically heated, air cooled, and non-vented barrel at approximately a 65" center line height. Barrel is set up for Contra-Cool but does not include blower. Gearbox has a reduction ratio 13.75:1 and is direct driven in a wraparound manner by a 60 HP Baldor D/C motor ...more
2.5" Gloucester, single screw extruder, 32:1 L/D, (5) zone air cooled, vented barrel, 45" centerline height
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Gloucester
used- gloucester 2.5" extruder 32:1 l/d five (5) zone air cooled and vented barrel at a 45" centerline height. top center feed throat. driven by a 50 hp a/c 1750/2100 rpm motor, includes 6 zone temperature control panel and 5-hole strand die.
JUST ADDED!
2-1/2" Hobbs William, single screw extruder, 24:1 L/D, air cooled, 40 HP DC drive
KD Machinery | Scottsdale, AZ
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Hobbs William
Used Hobbs William Single Screw Extruder for Sale. This pre-owned William Single Screw plastic extruder is located in The United States and available to be seen under power for an inspection. If you have any questions regarding this William Single Screw Extruder, please feel free to contact us. You may Activate ...more
2.5" NRM #2-5-24, Extruder, single head, electrically heated, 2.5" diameter x 24" L plastic extruder, 40 HP, 1725/2100 RPM, 500 V
Machinery & Equipment Co | Brisbane, CA
Category: Extruders and Extrusion Lines
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Nrm
Model: 2-5-24
NRM extruder, 2.5" diameter x 24" long plastics extruder, model 2-5-24.1 PM IV RH-1CANVTD, single head carbon steel extruder. Unit is electrically heated, air cooled 4 zone non-vented barrel, water reed throat with hopper. Unit is driven by 40 hp, 500 volt, 1725/2100 rpm motor. Unit includes electrical panel, serial ...more
JUST ADDED!
2.5" Polytruder/Egan, extruder, 24:1 L/D, 40 HP AC, air cooled, 5 barrel zones, 6 downstream zones, 460 V.
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Polytruder
Used 2.5" Polytruder/Egan, 24:1 L/D, 40 HP AC Air Cooled, 5 Barrel Zones, 6 Downstream Zones 41" Centerline 40 HP Marathon AC Motor, 324T Frame, 1770 RPM, 460/3/60, 50A Egan Helical Gear Drive, Model H-2515, Rated For 94 HP @ 1410 RPM 14.06:1 Gear Ratio, Belt Driven ABB Inverter Drive RKC CB400 Temp Controllers ...more
2-1/2" Royal cold feed extruder, 10:1 L/D, 40 HP 500 VDC motor, roller feed
Soberay & Sons Ltd | Cleveland, OH
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Royal
One (1) Used Royle 2.5" 60mm Cold Feed Rubber Extruder, Model 1A, 16:1 L/D, no motor, PFR power feed roll, adjustable scraper blade, forced gearbox lubrication.
JUST ADDED!
2.5" Welex 2.5 RHNV Extruder, Air-cooled Barrel, 24:1, SCR Control, 9.38:1, 1992
Revelation Machinery | Chicago, IL
Category: Extruders and Extrusion Lines
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Welex
Year: 1992
Make: Welex, Model: 2.5 24:1 RHNV, Year: 1992, Machine Location: California, Screw Diameter: 2.5″, Length-to-Diameter Ratio: 24:1, Motor Power: 40HP DC Motor, Gearbox Ratio: 9.38:1, Barrel Cooling: Air Cooled, Heating Zones: 3, Barrel Type: Jacketed With Electrical Heaters, Screen Changer: Hydraulic, Control ...more
2.6" Gloucester #25225R2, single screw extruder, 32:1 L/D, reconditioned 2011
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Gloucester
Model: 25225R2
used- gloucester single screw extruder, model 25225r2. 2.5' diameter screw, 32:1 l/d. has an electrically heated, air cooled, and non-vented barrel at approximately a 65? center line height. barrel is set up for contra-cool but does not include blower. gearbox has a reduction ratio 13.75:1 and is direct driven in ...more
JUST ADDED!
2.6" Xinda #SHJ-65, Twin-screw Extrusion Line, w/ Underwater Pelletizer, 65mm, 90kw, 10-60 RPM, Siemens Simatic S7-1200, 2023
Revelation Machinery | Chicago, IL
Category: Extruders and Extrusion Lines
Seller: Revelation Machinery
Location: Chicago, IL
Model: SHJ-65
Year: 2018
Make: Hyster, Model: J40XNT, Year: 2018, Machine Location: California, 2018 Hyster J40XNT electric 3-wheel cushion tire forklift with 4,000 lb capacity, compact turning radius, and warehouse-friendly design for pallet handling, dock work, racking, and indoor material handling., Year 2018, Make Hyster, Model J40XNT ...more
JUST ADDED!
2.8" Coperion #ZSK-70-SC, Twin Screw Extrusion Line, 800-1,000 kg/hr, Pelletizing Package, co-rotating, 70mm, 200 RPM, 2009
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Coperion
Model: ZSK-70-SC
Year: 2009
used coperion zsk 70 sc twin screw extrusion line 800-1,000 kg/hr polymer compounding system with pelletizing package. consisting of: (1) koch technik feeding system & scholz dosiertechnik dosing unit, (1) coperion zsk 70 sc twin screw extruder 40:1 l/d (2) 70 mm diameter screws, 40:1 l/d ratio, co-rotating ...more
2.83" Jiangsu Xinda #PSHJ72, twin screw extruder, 40:1 LD ratio, 2007
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Jiangsu-Lianguan
Model: PSHJ72
Year: 2007
Used 72mm Jiangsu Xinda Twin Screw Extruder, Model PSHJ72 40:1 LD Ratio, 10 Elements, Port in Zone 5, Vent In Zone 8 110 Kw Main Motor(147.5 Hp) With AC Drive 500 RPM Screw Speed Has Clampshell Style Barrel Opening 11 Temp Zone, 1 Die Zone, 1 Pressure Readout 2.2Kw Material Feeder With Control Panel New in 2007 ...more
2.95" Cincinnati Milacron #Pak-3, single screw extruder, 24:1 L/D, 60 HP AC, 5 barrel zones, air-cooled, 2004
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cincinnati Milacron
Model: PAK 3
Year: 2004
Used 75MM(3.0") Cincinnati Milacron Single Screw Extruder 24:1 L/D Ratio 60 HP Reliance RPMAC AC Motor Siemens AC Drive 5 Barrel Zones Air-Cooled Barrel 6 Die Zones 55" Centerline Currently On Raised Base With V-Grove Casters Base Can Be Unbolted For 42.5" Centerline 460/3/60, 222 FLA, 300 Amp Disconnect Bunting ...more
2.95" Krauss Maffei #KMD-75/32, Parallel Counter-Rotating Twin Screw Extruder, 32:1 L/D, 51 HP, Air-Cooled, 5 Zones, 480/3/60, 19302 hours, 2006
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Krauss Maffei
Model: KMD 75/32
Year: 2006
Used 75mm Krauss Maffei Parallel Counter Rotating Twin Screw Extruder, Model KMD 72/32, New in 2006 32:1 L/D Air Cooled Parallel Barrel, 5 Zones, Vented with Vacuum System 51hp Direct Drive Reliance AC Inverter Duty Motor, 1770 RPM, 62 Amps Allen-Bradley PowerFlex 700 Drives 9 Downstream Zones, Right to Left ...more
3" Davis Standard #DS-30, Single Screw Extruder, 24:1 L/D, 40 HP DC Motor, 4 Barrel Zone, 7.42 Gearbox Ratio, 1989
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: DS-30
Year: 1989
Used 3" Davis Standard Single Screw Extruder, Model DS-30, 40 DC Motor 24:1 L/D Air Cooled Barrel, 4 Barrel Zone, 4 Downstream Zones 6" x 4" Feed Throat 40 HP Electric DC Motor, With 1 HP Blower Arm Amps: 67.3, Field Amps: 2.24/1.04 1150/2000 RPM Stab Shunt Wound 7.42 Gearbox Ratio, 60HP Capacity with 1.25 Service ...more
3" Davis Standard #DS-30, single screw extruder, 24:1 L/D, 7.42 gearbox ratio, air cooled, 40 HP AC, 1995
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: DS-30
Year: 1995
Used 3" Davis Standard Single Screw Extruder, Model DS-30, New in 1995 24:1 L/D Air Cooled Barrel, 4 Barrel Zone 7.42 Gearbox Ratio, 70hp Capacity with 1.25 Service Factor 40hp Baldor Vector AC Motor, 1180-3000rpm, With AC Drive Novus Temperature Controllers, 4 Barrel Zone, 3 Die Zone Screw Speed & Motor Load ...more
3" Hartig Extruder, 4 barrel zones, 24:1 L/D ratio, 75 HP, 3.25" L x 3" width feed throat, 2019
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Hartig
Year: 2019
Used 3" Hartig Extruder, 24:1, 75HP 4 Barrel Zones, 24:1 L/D Ratio Feed Throat: 3.25" L x 3" W 8 Downstream Zones Koellman Gearbox Size: PEZS 312 13.95:1 Ratio, Input RPM 1750, Output RPM 125 Rating: 93, Service Factor: 1.0 S/N: 71087348/10 75HP Marathon AC Motor, Blue Max, UVJ365THFS80366UL 460/3/60, 92A (42.5A @ ...more
3" Merritt Davis, extruder w/ 1.25" co-extruder, 24:1 L/D ratio, air cooled, 60 HP AC motor
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Merritt
Used 3" Merritt Davis Extruder with 1.25" Merritt Co-Extruder 60 HP Motor AC Motor, NEW WEG AC Drive On Primary Extruder, 24:1 L/D Ratio, Air Cooled, 4 Barrel Zones, 22:1 Gear Ratio, 1.25" Pedestal Extruder With Tilt and Swing,5 Hp Ac Motor, 23.2:1 Gear Ratio, 12 Total Die Zones For the System, Both Machines With ...more
3" Miotto #EM03/60K, extruder, 60:30 L/D, Atos Control, hopper/feeder, 40 HP, 5 zone, 2004
Inter-Plant Sales | Hugo, MN
Category: Extruders and Extrusion Lines
Seller: Inter-Plant Sales
Location: Hugo, MN
Mfr: Miotto
Model: EM03/60K
Year: 2004
3" Welex #HS-3.0-40D-SV, Single Screw Extruder, water cooled, 40:1 L/D, 1520 RPM, 550 HP VFD Drive, Vented Barrel, 480 V., 2009
Aaron Equipment Co | Schaumburg, IL
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Welex
Model: HS-3.0-40D-SV
Year: 2009
used welex hs 3.0 40d sv single screw extruder | 3" screw | 40:1 l/d | 1520 rpm | 550 hp vfd drive | vented barrel. 1520 rpm max. screw speed. electric heated, air cooled barrel. vented barrel. 57" barrel center line. 3" x 9" oversized water cooled feed throat. touch screen operator control. ...more
3.5" Cincinnati Milacron #Apex-3.5, side feed single screw extruder, 30:1 L/D ratio, 75 HP, water-cooled barrel, GE Fanuc PLC, 1999
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cincinnati Milacron
Model: APEX 3.5
Year: 1999
Used 3.5" Cincinnati Milacron Side Feed Single Screw Extruder Model Apex 3.5 30:1 L/D Ratio, 30:1 L/D Special Screw for MuCell Material Side Port Feed Throat for MuCell Material Entry Water-Cooled Barrel Belt Driven Through Flender SZNE-250 18.17:1 Gearbox Rated To 250 HP 6 Barrel Zones, 3 Die Zones ...more
JUST ADDED!
3.5" Davis Standard #3.5-PMIII, extruder, water-cooled, 24:1 L/D, 75 HP, 1780 RPM, 460/3/60, Allen Bradley drive, 2000
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 3.5 PMIII
Year: 2000
Used 3.5" Davis Standard/NRM Model 3.5 PMIII Extruder, Water-Cooled, 24:1 L/D, 75 HP Water Cooled Barrel, 4 Barrel Zones, 4 Downstream Zones 75 HP Marathon AC Motor, 365T Frame 1780 RPM 460/3/60, 93A TEFC Enclosure Allen Bradley Drive Eurotherm 2208e Temp Controllers, West 6100+ Limit Controllers Indicator Lights For ...more
JUST ADDED!
3.5" Davis Standard #3.5-PMIII, extruder, water-cooled, 24:1 L/D, 100 HP, 17.39:1 gearbox, AB 1336 VFD, 460/3/60, 2007
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 3.5 PMIII
Year: 2007
Used 3.5" Davis Standard/NRM Model 3.5 PMIII Extruder, 24:1 L/D, 100 HP Water Cooled Barrel, 7 Barrel Zones, 4 Downstream Zones Screw Speed Approx: 102 RPM Centerline Height: 42.5" +/- 2" 100 HP Marathon AC Motor, 405T Frame 1785 RPM 460/3/60, 115A TEFC Enclosure, IP43 17.39:1 Davis Standard Gearbox Rated For 257 HP ...more
3.5" Davis Standard, extruder, water cooled, 75 HP
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Model: 350H III
Used 3.5" Davis Standard Extruder, Water Cooled, 75HP, Serial #F-8613.
JUST ADDED!
3-1/2" Davis Standard #35IN35, extruder, 24:1 L/D, air cooled, 50 HP, 1995
KD Machinery | Scottsdale, AZ
Category: Extruders and Extrusion Lines
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Davis Standard
Model: 35IN35
Year: 1995
Used Davis Standard 35IN35 (1995) Extruder for Sale. This pre-owned Davis Standard plastic extruder is located in The United States and available to be seen under power for an inspection. If you have any questions regarding this Davis Standard Extruder, please feel free to contact us. You may Activate Pricing to view ...more
