Buy or Sell Your Vertical Press

SERIAL. 22050-298, MODEL. CO-10-8080, CAPACITY. 80 TON, STROKE. 2", DISTANCE BETWEEN POST GUIDES. 14-1/2", BED LENGTH. 103", PUSH BUTTON CONTROLS & 5 DIE SETS, MOTOR. 20 HP 230/460/3/60 - 1170 RPM, OVERALL DIMENSIONS. 154" LONG X 48" WIDE X 68" HIGH.

-Model: MCP-60-2-36, -Serial Number: 3654-8-80, -Capacity: 60 Ton, -37" L-R between Posts, -22" F-B between Posts, -Post Diameter: 3", -16" Ram to Bed with Stroke Up, -2" Stroke (to be confirmed), -43.25" Floor to Top of Die Rails, -37.5" Floor to Top of Bed, -15 Hp Motor, 1150 Rpm, 575 Volt, 3 Ph, 60 Hz., -Wichita ...more

SERIAL.960C.0, MODEL. C.O, CAPACITY. 8 TON, STROKE. 2", DISTANCE BETWEEN POST 10", OPEN HEIGHT. 9-1/2", POST DIAMETER. 1-1/8", TOP PLATE. 16" X 16", ADJUSTABLE BASE. YES, AIR CLUTCH. YES, MOTOR HORSEPOWER 1-1/2.

SERIAL. 16304-1-77, MODEL. CO-6-24-18, CAPACITY. 16 TON, STROKE. 2, DISTANCE BETWEEN POST. 9-1/2" X 20", AIR CLUTCH. YES, MOTOR. 5 HORSEPOWER.

Tonnage Capacity: 60 TonStroke: 2.5"Bed Size: 34" x 23"Open Height: 14.5"Motor: 20 HP, AC Drive, 1165 RPM, 208-220/440V, Air ClutchMounting BaseFlying DieAir Cylinder Die Return.

Tonnage Capacity: 150 TonStroke: 2.5"Bed Area: 50" x 36"Open Height: 14"Post Diameter: 3.5"Motor: 30 HP, AC, Air ClutchAdjustable Locating Holes in DieAdjustable Mounting Base.

Product USED BRAKE DIES(1) 72 1/2″ OF 2 1/4″ OFFDET DIES- UPPER & LOWER- $1250, (2) 4″ FEMALE V-DIES (2) 72″ SECTIONS 5 1/4″ WIDE, 5 3/4″ HIGH -HAS TANG SLOT BUT NO KEY- $2500.

SERIAL. 5324, MODEL. J90-12, YEAR NEW. 19, CAPACITY. 90 TON, OVERALL LENGTH OF BED & RAM. 144", DISTANCE BETWEEN HOUSINGS. 126-1/2", STROKE OF RAM. 7", OPEN HEIGHT. 13", CLOSED HEIGHT. 6", DEPTH OF THROAT. 6-1/4", RAM SPEED RAPID APPROACH. 120 IPM, RAM SPEED FAST PRESS. 54 IPM, RAM SPEED SLOW PRESS. 15 IPM, RAM ...more

LENGTH OF FILLER BLOCK. 120-1/21", WIDTH OF FILLER BLOCK. 3", HEIGHT OF FILLER BLOCK. 1-1/2", TANG ON TOP FEMALE. 1.2", TANG ON BOTTOM. 1/2".

9"x42" MSC vertical milling machine, variable speed, ready to go..

Brand/Model: Johnston 18CC : Unused Vertical turbine cast iron pump bowls. 3 stage, Casting No. JP-4457 Applications: Dewatering Pump, Water Well Pump, Water Wastewater Pump, Water Pipeline Pump, Charge Pump, Flood Water Control Pump, Mine Dewatering Pump, Quarry Dewatering Pump, Groundwater Pump, Irrigation Pump ...more

Machine Type.Brakes, Mechanical Manufacturer.CHICAGO DREIS & KRUMP Model.N/A Year.N/A Condition.Used.

This is a 2 phase vertical separator with a maximum pressure of 720 PSI, designed for sweet service. Manufactured by RJV Gas Field Services in 1996, it s a diameter of 16 inches and is portable. The operational status is currently disconnected, and it includes a meter run diameter of 3 inches from North Star Flow ...more

Available for sale: A 16-inch separator package manufactured by RJV Gas Field Services in 2005. This sweet service separator is rated for a maximum pressure of 720 PSI and is designed for vertical positioning. It s a meter run diameter of 2 inches and has an operational status of 'Connected'. Located in ...more

For sale: A vertical compressor separator manufactured by Sure Weld Industries in 1989. This unit s a diameter of 36 inches and a length of 8 feet, with a maximum pressure rating of 200 PSI and temperature rating of up to 158°F. It is housed, non-portable, and operationally connected. The separator has a corrosion ...more

Discover the Paintearth vertical sweet separator, model V-8797, built in 2008. This operational unit s a diameter of 24 inches and a separator length of 5 feet, with a maximum pressure of 720 psi and maximum temperature of 130°F. Located in Provost, AB, Canada, this portable and housed equipment is ready for use ...more

For sale: A 2006 vertical separator in Blackfalds, AB. This unit s a diameter of 16.0 inches and a maximum pressure rating of 1480 psi, designed for sweet service type applications. The separator has a length of 8 feet and is housed for protection. It is currently disconnected but remains portable with an operational ...more

MODEL.: CPPS-PO-400-24, SERIAL.: 5164-1, CAPACITY @ MAX WIDTH.: 24" X.250", W/ (2) SETS OF POWER DRIVEN PINCH ROLLS, Machine Type.Coil Straighteners Manufacturer.COE Model.CPPS-PO-400-24 Year.N/A Condition.Used.

MODEL.: CPPS-PO-400-30, SERIAL.: 5164-1, CAPACITY @ MAX WIDTH.: 30" X.250", W/ (2) SETS OF POWER DRIVEN PINCH ROLLS, Machine Type.Coil Straighteners Manufacturer.COE Model.CPPS-PO-400-24 Year.N/A Condition.Not specified.

SERIAL. 14802-2, MODEL. CPPS-225-12, YEAR NEW. 1996, CAPACITY. 0.020 TO 0.090, CAPACITY (MAX WIDTH). 12", SPEED (MAX). 125 FPM, NUMBER OF ROLLS. 7 (4 OVER 3), DIAMETER OF STRAIGHTENING ROLLS. 2-1/4", INDEPENDENT ROLL ADJUSTMENT. YES, DIAMETER OF PINCH & EXIT ROLLS. 3", ENTRY & EXIT PINCH ROLLS. YES, PINCH ...more

Manufacturer ACER E-Mill Head Condition New Stock Number ACER Head.

Used Kikusui rotary tablet press, model Libra 2 0845SS2JZ, 45 station, 80kn pre compression, 80 kn main compression, 12 mm max tablet diameter, 16 mm max depth of fill, single sided with force feeder and feed hopper, keyed upper punch guides, rated up to 270000 tablets/hour, with HMI panel, serial# 1-4454/A-185, built ...more

Used GlobePharma Single Station Tablet Press.

95 tons8’ longOptions or Upgrades, Automec CNC 150 1-axis control.

25 Ton X 4’ Hydraulic Press Brake with Hurco Autobend 7 Controls, Full Length Foot Bar Actuation, Ram Stroke Adjustment, Speed Control and Tonnage Control., Tonnage: 25 Tons, Length of Bed: 48”, Distance Between Housings: 40”, Throat: 8”, Open Height: 14.5”, Stroke: 3.94”, Motor: 3 ...more

SKU: 133996, Year: 2003, Condition: Used, Bed Length: 12 ft, Tons: 150 ton, Brake Type: Hydraulic, CNC: Yes, Electrical :, Voltage: 220 volts, Phase: 3-phase, Dimensions: 85.00 (H) x 60.00 (W) x 144.00 (L) inches, Additional :, Includes:, - 1 x 4-Way Die - 8 ft, - 1 x Gooseneck Punch - 12 ft, - 1 x Accute Punch - 8 ...more

Make: Amada, Model: RG D9 E, Year: 1985, Machine Location: Washington, Model: RG D9 E, Year: 1985, Capacity: 80 Ton, Bending Length: 8′ (96″), Type: Hydraulic Press Brake, Control: Manual hydraulic controls, Ram Stroke: Approx. 8″, Open Height: Approx. 15″, Throat Depth: Approx. 10″.

Make: LVD, Model: 350 BH 15, Year: 2006, Machine Location: Upon Request, 350 Tons X 15′ PPEB Turbo machine, Updated LVD Control system, 5 axis backgauge: X,R,Z1,Z2,X prime, Iris imaging system, 350 gallon oil capacity, 51,000 lbs.

EquipmentPlate Processing MachinesHydraulic Press Brakes2002 Salvagnini Roboformer 135 ton-10' PBS 135/3000 CNC Press Brake2002 Salvagnini Roboformer 135 ton-10' PBS 135/3000 CNC Press BrakeHave one to sell?Sell Now1 (714) 253-4707used@jpsint.comConditionUsedQuantity1 availableRequest QuoteLoading.Have one to ...more

SERIAL. 5937, MODEL. J-165-14, CAPACITY. 165 TON, LENGTH, BED & RAM. 168" (14'), DISTANCE BETWEEN HOUSINGS. 150" (12'6"), STROKE. 10", OPEN HEIGHT. 15", THROAT DEPTH. 7", THROAT HEIGHT. 11", PASS LINE HEIGHT. 36".

, Model No. HBM 175-8-10, Overall bed length 10', Distance between housing 8' 6", Stroke 10", Shut Height 7", Open Height 17", Gap 8 1/4", Filler block, Power operated front reading backgauge 30”, Approx size 112" H x 52" wide, Long 130”, Wide 59”, Tall 112”, NEW 2024 Tooling, 4 Way Die – ...more

SERIAL. 44311, MODEL. 90AS X 8, YEAR. 1985, CAPACITY. 90 TONS, OVERALL LENGTH OF BED. 10', DISTANCE BETWEEN HOUSINGS. 8'4", STROKE. 8", MAXIMUM DAYLIGHT. 15", MINIMUM DAYLIGHT. 7", THROAT. 7", AUTO CROWNING. YES, UPPER & LOWER POWER DIE CLAMPING. YES, ELECTRIC FOOT TRIP. YES, DUAL PALM BUTTONS. YES, AUTO ...more

(1) Used 56" King Vertical Turret Lathe; S/N 20063, Table Diameter.46", Table Speed Range. 0 - 110 RPM Variable, Max Swing. 56", Max Turning Height.40", Max Work-piece Weight.24,000 lbs., Motor. 50 HP, Electrical Characteristics.230/460 VAC / 3 Phase / 60 Cycle, (3) Jaw Chuck, Overall ...more

used- cjrtec 100 ton cnc conveyor beam press/die press; extended table 63" x 50"; 2 roll pre-feed stand; waste recovery cart; die mounting system. mfg. 2015.

UTUBE NUMBER: 1394, MANUFACTURER: DAHLSTROM, MODEL NUMBER: 8TP, SERIAL NUMBER: P-502, Capacity: 8 Tons, Die Space: 3″ – 7″, Stroke: 2-1/2″, Flywheel RPM: 300, Slide Adjustment: 2″, Top Die Rail: 3-3/8″ x 14″, Bottom Die Rail: 4-15/16″ x 20″, Post Diameter: ...more

(1) Used 50 TON DAHLSTROM Model 50TP High Speed Cut Off Press; 4 Post Type; Air Clutch/Brake; S/N P769, Capacity.50 tons (bottom stroke), Distance Between Posts.19" L-R x ___" F-B, Distance Between Guide Bushings., Stroke.2", Distance Bed to Floor.44 1/2", Speed.300 spm (est), Motor.10 HP, Electrical ...more

, Manufacturer: Tishken, Model Number: ACO-S-50, Serial Number: 21854, Model Year: 1997, Size / Capacity: 50 tons, Stock Number: 13381, s:, Pnematic, Double piston actuation, 4-post die head, Adjustable shut height, Lateral adjustment for lineup, D.C. trip circuit, Production counter, Automatic trip, Air valves with ...more

UTUBE NUMBER: 4112, MANUFACTURER: TISHKEN, Capacity: 50 Ton (Estimated), Stroke: 2-1/2″ (Estimated), Post Diameter: 2-1/2″, Die Area: 20-1/2″ x 33-1/2″, Distance Between Posts: 20-1/2″ L-R x 28-1/2″ (F-B), Shut Height: 15″, Motor, Scrap Chute, Control Panel, OVERALL ...more

UTUBE NUMBER: 2965, MANUFACTURER: TISHKEN, MODEL NUMBER: C0-4-4, SERIAL NUMBER: 13749-669, YEAR: 1969, Stroke: 4", Post Diameter: 1-1/2", Die Area: 7" x 12", NOTE: Crank is apart, OVERALL DIMENSIONS: 4′ x 4′ x 4′, APPROXIMATE WEIGHT: 3,200 Lbs., LOCATION: Universal Warehouse ...more

1967 WATERBURY FARREL 512 ICOP, Stroke. 1.875", Weight. 3500.

MANUFACTURER. WATERBURY FARREL, MODEL. PC 112, STATIONS. 12, MACHINE CAPACITY. 75 Ton, TONNAGE PER STATION. 19 Ton, CENTER DISTANCE. 5.125", STROKE. 9", BLANK DIAMETER. 5.125" max., DEPTH DRAW. 4" max., SPM. 60-100, Minster air clutch and brake, Upgraded electrics in 2011 safeties & PLC, 13' 10" Long X 6' ...more

UTUBE NUMBER: 2968, MANUFACTURER: TISHKEN, MODEL NUMBER: CO-4-4, SERIAL NUMBER: 4095-570, YEAR: 1970, Stroke: 4", Post Diameter: 1-1/2", Die Area: 7" x 12", Distance Between Posts: 7", NOTE: Crank is Disassembled, OVERALL DIMENSIONS: 3′ x 4′ x 6′, APPROXIMATE WEIGHT: 2,800 Lbs. ...more