19 Results
1/4" National #S-2, 5 die cold nut former, 15/32" cutoff diameter, 1/2" cutoff length, 250 PPM, 15 HP
Hariton Machinery Co Inc | Bridgeport, CT
Category: Nut Formers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: National
Model: S-2
Cutoff Diameter 15/32" Cutoff Length 1/2" Die Kickout 5/8" Pieces Per Minute 250 Electrics 15 HP 230/460 Volts AC Motor Weight 15,000 Lbs., Bushing Cutoff, Will accept PKO, discharge conveyor, Excellent Condition as Taken from Service.
1/4" National #S-2, 5-die cold nut former, 250 PPM, bushing cut-off, 15 HP, PKO ready
Hariton Machinery Co Inc | Bridgeport, CT
Category: Nut Formers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: National
Model: S-2
Cutoff Diameter 15/32" Cutoff Length 1/2" Die Kickout 5/8" Pieces Per Minute 250 Electrics 15 HP AC Motor and Controls Weight 15,000 Lbs., Bushing Cutoff, PKO Ready, Requires Parts.
1/4" Sakamura #NP-320, nut former
National Machinery Exchange | Newark, NJ
Category: Nut Formers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Sakamura
Model: NP-320
" Sakamura NP 320 Nut Former.
1/4" Waterbury-Farrel #256, 5D nut former, 1/4" max nut size, 3/8" max feed length, 250 PPM
Hariton Machinery Co Inc | Bridgeport, CT
Category: Nut Formers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Waterbury-Farrel
Model: 256
1/4" Waterbury Farrel Model 256 Five Die Nut Former Brand, WATERBURY FARREL, Model, 256, Type, Nut Formers, Stock #, 10467, Condition, Used, One Used 1/4" Waterbury Farrell Model 256 Five Die Nut Former, Serial No 225121-225833, 1/4" Maximum Nut Size (American standard finished), 11/32" Maximum Cutoff Capacity, 3/8" ...more
1/4" Waterbury-Farrel #256, 5-die, 11/32" cutoff, 250 PPM, 7/16" die knockout
FH Machinery Inc | Ivyland, PA
Category: Nut Formers
Seller: FH Machinery Inc
Location: Ivyland, PA
Mfr: Waterbury-Farrel
Model: 256
Maximum Nut Size1/4" (American Std Finished) Maximum Production250 PPM Maximum Cutoff Capacity11/32" Maximum Die Knockout7/16" Maximum Across Flats3/8" Approx. Weight9,000 lbs Approx. Floor Size60" x 99".
Get email updates for newly added Nut Formers
5/16" National #S-2, 5 die cold nut former, 1/2" cutoff diameter, 9/16" cutoff length, 200 PPM, 15 HP
Hariton Machinery Co Inc | Bridgeport, CT
Category: Nut Formers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: National
Model: S-2
Cutoff Diameter 1/2" Cutoff Length 9/16" Die Kickout 3/4" Pieces Per Minute 200 Electrics 15 HP 230/460 Volts AC Motor Weight 21,000 Lbs., Bushing Cutoff, Will accept PKO ( NDS Parts), discharge conveyor, Excellent Condition as Taken From Service.
3/8" National S2 Nut Former, 150 PPM, 3/4" hex nut, 17/32" " nut height, 11/16" blank length, 3/4" kick
National Machinery Exchange | Newark, NJ
Category: Nut Formers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: National
PPM. 150, MAX HEX NUT. 3/4", MAX NUT HEIGHT. 17/32", MAX BLANK LENGTH. 11/16", MAX KICK. 3/4", +, O.A. DIM. 6'3" X 14'2" APPROX, WEIGHT. 34,300# APPROX, +, MOTOR +, HORSE POWER. 20+, RPM. 720.
5/8" National M#164, High Speed Nut Former, 4 Die, 200 PPM, 24mm A.F., 17.5mm nut height, 19mm blank length, 22.5mm cutoff
National Machinery Exchange | Newark, NJ
Category: Nut Formers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: National
Model: 164
CAPACITY. 5/8", PPM. 200, MAX HEX NUT ACROSS FLATS. 24mm, MAX NUT HEIGHT. 17.5mm, MAX LENGTH OF BLANK. 19mm, MIN LENGTH OF BLANK. 9mm, MAX DIA. CUT OFF. 22.5mm (65Kg), MAX KICK. 25mm, FLOOR SPACE.(LR X FB X HI). 235" X 95" X 102", WEIGHT. 77,000 LBS, - MISC. TOOLS AND TOOLING, PLATFORM STEPS, ELECTRIC CONVEYOR, SN ...more
5/8" Nutap #M-16, forming & trimming line, motorized wire decoiler, nut press, 30 HP, #16930
Yoder Machinery Sales | Holland, OH
Category: Nut Formers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Nutap
Model: M-16
MODEL. M-16, MOTORIZED WIRE DECOILER:, CAPACITY. 2,000 LBS, O.D. 30", PRE-STRAIGHTENING & FEED ROLLS. YES, NUT PRESS:, HEXAGON & SQUARE NUTS. 1/2" - 5/8", NUTS PER MINUTE. 115, AIR CLUTCH. YES, 4-STATION FLATTENING, FORMING & CUTTING MACHINE, 2-STATION PIERCE & PUNCH MACHINE. YES, COOLANT SYSTEM WITH ...more
3/4" National, 5 die nut former, 6 station, 56 PPM
Hariton Machinery Co Inc | Bridgeport, CT
Category: Nut Formers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: National
Maximum Cutoff Diameter 1 1/4" Maximum Cutoff Length 1 1/2" Maximum Die Kickout 1 5/8" Across Flats 1 1/4" Pieces per Minute 56 Weight 125000 pounds Stations 6, Tooling to make 5/8" Heavy Hex Double Recessed Nuts.
1" National Cold Nut Former, 50 PPM, 1-5/8" A.F., 1-5/16" nut height, 3-5/8" cutter
National Machinery Exchange | Newark, NJ
Category: Nut Formers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: National
PIECES PER MINUTE. 50, MOTOR. R.P.M. 60 CYCLES, 720, 50, MAX ACROSS FLATS. 1-5/8", MAXIMUM NUT HEIGHT. 1-5/16", CUTTER DIAMETER. 3-5/8", FEED ROLL DIAMETER. 0.
3.62" Hatebur #AMP50, hot former, 4 forging stations, I/heater & bar rack, 1992, overhauled 2020
Hariton Machinery Co Inc | Bridgeport, CT
Category: Nut Formers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Hatebur
Model: AMP50
Year: 1992
Initial Weight of Formings 0.17-1.7kg Max. Outer Diameter ( round parts) 92mm Max. Outer Diameter for Combination Banks 82mm Max. Width Across Flats ( hex) 80mm Bar Diameter 28-50mm Cutoff Length 32-110mm Production Rate(pcs/min) 60-100 Forging Tonnage 8000kN Drive Motor Rating 170kW, Forging Stations 4, Control ...more
4.92" Hatebur #AMP70XL-HFE, hot former, bar rack, induction heater, 50-70 PPM, 1995
Hariton Machinery Co Inc | Bridgeport, CT
Category: Nut Formers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Hatebur
Model: AMP70XL-HFE
Year: 1995
Production Rate 50-70 PPM Max. Part Weight 13.4 Lbs. Max. Outer Diameter 125mm Max. Width Across Flats ( hex) 105mm Min/Max. Bar Diameter 36-60mm Min/Maximum Cutoff Length 45-140mm Forging Tonnage 15,000 KN Drive Motor Rating 300Kw Center Distance of Dies 320mm Die Diameter 1st Station 200mm Die Diameter 2nd 3rd 4th ...more
Jern Yao #JNFP-14B5S, 5-die high speed nut former, 280 PPM, 30 HP, bushing cutoff, 2006
Hariton Machinery Co Inc | Bridgeport, CT
Category: Nut Formers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Jern Yao
Model: JNFP-14B5S
Year: 2006
Cutoff Diameter 14mm Cutoff Length 13mm Die Kickout 15mm Pieces Per Minute 280 PKO Stroke 8mm Electrics 30 HP ACVD Motor and Controls Weight 12,500 Kg, 85 MT Forge Power, PKO, Bushing Cutoff, Single Plane 5 Roll Straightener, Product Size M8.
National #164, 4 die high speed nut former, 200 PPM, air clamping on feed rolls, 1988
Hariton Machinery Co Inc | Bridgeport, CT
Category: Nut Formers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: National
Model: 164
Year: 1988
One Used National Model 164 4 Die High Speed Nut Former, Serial No 28864, Mfg. 1988, M16 Std Hex Nut, 24mm Across Flats, 22.5mm Cutoff Diameter, 19mm Cutoff Length, 25mm Kick Out Stroke, 28mm PKO Stroke, 200 PPM, 1800 Kn Heading Load, Air Clamping on Feed Rolls, Note: requires 4th die ko- being used as slug discharge ...more
Nedschroef #MW48, Hi-speed Hot Nut Former, 150 PPM, 2.362" cutoff, 7.087" slide travel, 1.889" hex., 1.614" squaring, 1996
National Machinery Exchange | Newark, NJ
Category: Nut Formers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Nedschroef
Model: MW48
Year: 1996
Metric Standard, Maximum across flats hex. nuts. 48.0 mm (1.889"), Maximum across flats square nuts. 41.0 mm (1.614"), Maximum diameter products. 53.0 mm (2.087"), Maximum product height. 40.0 mm (1.575"), Minimum product height. 13.0 mm (0.512"), Maximum bar diameter raw material. 38.0 mm (1.496"), Maximum cutoff ...more
Nedschroef #MW53, Hot Forming Production Line, 53mm hex., 41mm squaring, 150 SPM, 65mm cutoff, 180mm slide travel, 1995
National Machinery Exchange | Newark, NJ
Category: Nut Formers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Nedschroef
Model: MW53
Year: 1995
Nedschroef Model MW53 Hot Forming Production Line, Built new in 1995, Range: M20-M33, Maximum Across Flats Hex Nuts:53mm, Maximum Across Flats Square Nuts:41mm, Maximum Diameter Products:55mm, Maximum Product Height:45mm, Minimum Product Height:13mm, Strokes per Minute: 150, Maximum Bar Diameter New Material:44mm ...more
Sakamura #NP430, Four Die Nut Former, M8 -M10 nut size, 230 PPM, 16 mm KO, 10 mm cutoff length
National Machinery Exchange | Newark, NJ
Category: Nut Formers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Sakamura
Model: NP430
NUMBER OF STATIONS. 4D X 4B, NUT SIZE. M8 -M10, MAX CUTOFF DIA. 10 - 17mm, MAX CUTOFF LENGTH. 10 mm, KO LENGTH. 16 mm, FORGING LOAD. 87,000 KGF, QUILL DIA. X LENGTH. 60 X 75 mm, PUNCH DIA. X LENGTH. 55 X 125 mm, DIE DIA. X LENGTH. 73 X 89 mm, RAM STROKE. 145, PPM. 230, WEIGHT. 31,700 LBS., O.A. DIM.(LR X FB X HI). ...more
Sakamura #NP440, Nut Former, 100 PPM, 4 die, .910 cutoff diameter, 3.936 die bore, 2.495 punch bore, 4.330die KO, .780 punch KO
National Machinery Exchange | Newark, NJ
Category: Nut Formers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Sakamura
Model: NP440
Sakamura NP-440, PPM - 100, 4 die, Die Bore - 3.936, Die KO - 4.330, Punch Bore - 2.495, Punch KO -.780, Max Cutoff Dia -.910, Bushing Cutoff, WEIGHT. 52,000Lbs APPROX., O.A. DIMENSIONS. 16' X 114" X 80", This machine was running product as of September 2017..
