Buy or Sell Your Vertical Lathe

Discover the efficiency and quality of operation with the O-M NEO-20EX (Alpha Series with Live Spindle). This VTL model, manufactured by O-M boasts impressive. It has a table diameter of 78.74, swing of 98.43, and working height of 78.74". Run by a robust 50hp main motor, the table speed can reach 230 RPM. Its spindle ...more

Spec Sheet:, Aloris CXA 4 Lathe Tool Post Boring Bar Holder, USED, Brand: Aloris, Part Number: CXA 4, Tool Holder, Wedge: 2-1/4, Tool Post Holder Type Boring Bar Holder, Lathe Swing (Inch) 13 to 18, Through Coolant No, Overall Height (Inch) 2, Overall Height 2 in, Overall Length (Inch) 3-1/2, Boring Bar Size w/o ...more

Overview, Type:MACHINE PARTSManufacturer:WEBSTER & BENNETTModel:DH SERIES II ManualStock #:11765Status:For Sale.

Capacity  Chuck Size: 6”Max. Turning Length: 7.9”Max. Turning Diameter: 6”Travels  Cross Travel (X-Axis): 27.5"Longitudinal Travel (Z-Axis): 11.8”Traverse (Y-Axis): 7.9”Rapid Feed: 164 FPMMain Spindle  Speed Range: 50-7000 RPMFull Power Speed Range: 1500-4500 RPMC-Axis ...more

Chuck Diameter: 46", Max. Swing with Side Head in Position: 49", Max. Swing with Side Head Below Table: 58", Chuck Speeds: 20 from 9 to 313 RPM, Feed Range: Variable 0.001 to 250 IPR, Max. Height Under Cross Rail: 40", Max. Height Under Turret Head: 36", Vertical Side Head Travel: 38.75", Horizontal Side Head Travel: ...more

Yama Seiki GV2000M Vertical Turning Center with Milling, TABLE DIAMETER: 2,000 MM (78.7 INCH), HEAVY DUTY MANUAL INDEPENDENT 4 HARD JAWS, MAX. SWING DIAMETER: 2,050 MM (80.7 INCH), MAX. TURNING DIAMETER: 2,000 MM (78.7 INCH), MAX. TURNING HEIGHT: 1,280 MM (50.3 INCH), RAM STROKE (Z AXIS): 900MM (35.5 INCH), CROSS RAIL ...more

CAPACITY:, Table Diameter: 144", Maximum Swing: 151", Maximum Height Under Cross Rail: 120", Maximum Under Ram or Tool Block. 112": 112", Ram Stroke: 96", Table Capacity: 100 Ton, Table Speeds, Infinitely Variable:.8-50 RPM, Table Speed Ranges: 2, Feeds, Infinitely Variable:.0005-2.0 IPR, Giddings & Lewis 8000 CNC ...more

Spec Sheet:, CXA 1 Lathe Tool Post Holder w/ Kennametal Tool, USED, Part Number: CXA 1, Tool Holder, Wedge: 2-1/4, Lathe Swing (Inch) 13 to 18, Through Coolant No, Overall Height (Inch) 2-1/8, Overall Length (Inch) 3-1/2, Maximum Cutting Tool Size (Inch) 3/4, Centerline Height (Inch) 1-7/16, Tool Bit Range (Inch) 1/4 ...more

Table Diameter, T-Slotted: 108", Maximum Swing: 120", Maximum Height Under Cross Rail: 84", Ram Stroke, 12" Extended Travel: 62", Ram Taper: #60 ANSI, Ram Cross Section: 7.875" x 7.875", Side Head Horizontal Ram Travel: 32", Side Head Ram Taper: #50 ANSI, Side Head Ram Cross Section: 7.25" x 8.50", Table Speeds ...more

HITACHI SEIKI HT23R CNC LATHE (1991), TURNING DIAMETER: 254 MM, TURNING LENGTH: 600 MM, SWIVEL DIAMETER: 450 MM, BAR MATERIAL DIAMETER: 65 MM, SPINDLE SPEED: 4000 1/MIN, POWER:** 15 KW, LATHE STATIONS / TURNING TOOL STATIONS:** 16 / 16, MACHINE DIMENSIONS:, - LENGTH: 2500MM, - WIDTH: 1300MM, - HEIGHT: 1870MM, MACHINE ...more

72" BULLARD AUTOMATIC TOOL BLOCK CHANGER, Manufacturer: Bullard, Model Number: Dyna Tape, Year Of Manufacture: 1982, Remanufactured 2004, Table Size: 72", Table Type: 4-Jaw Manual, Max Height Under Rail: 100", Max Swing: 78", Tool Changer: 16 Stations, Axis Travels: 45"X, 70"Z, Spindle Motor: 75 HP, Automatic Tool ...more

TubeTurn 200TubeTurn 135TubeTurn 225 Working Area Workpiece length (max.) 51 in Turning diameter over bed 25 in Turning- over support 14 in 14 in 15 in Travels Travel X-axis 13.4 in Travel Z-axis 51 in Headstock Speed range 24 - 300 rpm 14 - 496 rpm 24 - 300 rpm Spindle Torque (max.) 18,143 ft.lb. 16,992 ft.lb. 16,992 ...more

Stock Number: B600629, Bullard 42, Serial No. 20159, Age: 1942, Condition: Good, Table Size 42" 4-Jaw, Swing Side Head Above Table 45", Swing Side Head Below Table 46", Height Under Rail 36", Cross Rail Travel 25", Table Speed 8 To 83 Rpm's, Feeds.005 To.500, Main Motor 25 Hp., Turret Head Travel Left To Right ...more

For sale is a New O-M RT-915 CNC Vertical Lathe. This powerful Japanese Manufactured machine has a table diameter of 36.02" and supports a max. workpiece mass of 3300lbs. The operational capacity includes a max. swing of 43.31" and a max. turning diameter of 39.37". The machine utilizes a FANUC 0i-TF PLUS CONTROL ...more

Capacity  Chuck Size: 6”Max. Turning Length: 7.9”Max. Turning Diameter: 6”Travels  Cross Travel (X-Axis): 27.5Longitudinal Travel ( Z-Axis): 11.8”Traverse (Y-Axis): 7.9”Rapid Feed: 50 m/minMain Spindle  Spindle Nose (Flat Ø): 140Speed Range: 50-7000 RPMFull Power Speed ...more

MTA Tracer V-65E Magazine BarfeedNew: 2012 :LATHE TYPE. FIXED HEADSTOCKFEEDING DIRECTION. LEFT OR RIGHTBAR DIAMETER. 5-65mm (.25"-2.56")BAR LENGTH. Max. 1,200mm (48")MAGAZINE CAPACITY. 10 BARS AT 2.5"FEEDING SYSTEM. PNEUMATICAPPROX. WEIGHT. 750 LBS.

5-AXIS MACHINING CENTERS DECKEL MAHO DMU 50 eVo linear SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION: Used 2007 DMG MORI DECKEL MAHO DMU 50 eVo linear 5-Axis Simultaneous VMC: Made was made at DECKEL MAHO Seebach GmbH in Seebach, Germany -CONTROL- Heidenhain iTNC530 CNC ...more

Available for sale: A 2003 model PRESSON-ENERFLEX line heater combo featuring a 1.5 MMBTU capacity. This unit is housed, portable, and designed for vertical positioning with a maximum pressure of 1400 psi and suitable for sour service types. The diameter of the unit is 30 inches and it comes an attached separator ...more

5-AXIS MACHINING CENTERS DECKEL MAHO DMU60 monoBLOCK SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION: Used 2006 DMG MORI DECKEL MAHO DMU60monoBLOCK 5-Axis simultaneous VMC: Machine was manufactured at DECKEL MAHO Pfronten GmbH-Pfronten, Germany May be inspected under power ...more

Youji VTL1000ATC VTL, CAPACITY:, TABLE DIAMETER 39.37″, MAXIMUM SWING 53.14″, MAXIMUM CUTTING DIAMETER 43.30″, MAXIMUM CUTTING HEIGHT 35.43″, RAIL TRAVEL 20″, RAM STROKE, Z-AXIS 31.49″, TABLE WEIGHT CAPACITY 8,800 LBS, TABLE SPEED, 2-RANGES 1-600 RPM, CUTTING FEED RATE 0.39-78.7 ...more

STOCK NO. ET-5100, Giddings & Lewis Model 84VTC 96″ 2-Axis CNC Vertical Boring Mill, New: 2001, Make: Giddings & Lewis, Model: 84VTC, Table Diameter: 96″, Swing: 108″, Table speeds up to 200 RPM, Elevating Rail, Max under the rail: 90″, Ram Stroke: 57″, Ram Size: 8″ X ...more

LODGE & SHIPLEY 40" x 77" HEAVY DUTY ENGINE LATHE, MODEL# 25"/35", SWING OVER BED: 40", SWING OVER CROSS SLIDE: 30", DISTANCE BETWEEN CENTERS: 77", SPINDLE SPEEDS (25): 9 - 507 RPM, SPINDLE HOLE BORE: 2-1/2", MAIN MOTOR: 30 HP, THEADING: INCH ONLY, ELECTRICS: 220/440V, 3-PHASE, WEIGHT: 20,000 LBS, DIMENSIONS ...more

VTM-65 3-axis vertical turning center combines the benefits of a vertical lathe with those of a machining center. The 50-taper 36-tool magazine enables this machine to offer both turning and milling operations on a single platform. It is the ideal machine for efficient low-volume parts production, including valve ...more

Table Diameter: 55.11", Maximum Swing: 62.99", Maximum Part Height: 47.24", Ram Cross Section: 9.44" x 9.44", Ram Stroke: 35.4", Table Speed, 2-Ranges: 1-360 RPM, Table Motor: 60 HP/50 HP, Table Weight Capacity: 17,600 Lbs, Milling Spindle Taper: BT 50, Milling Spindle Speeds, Max: 1500 RPM, Milling Spindle Motor: 20 ...more

5-AXIS MACHINING CENTERS DECKEL MAHO DMU 50 SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION: One used 2008 DMG MORI DECKEL MAHO DMU 50 5-Axis VMC: Machine was made at Deckel Maho Seebach GmbH in Seebach, Germany 3D HEIDENHAIN MillPlus iT CNC control with DMG ERGOline 19" ...more

MOTCH 135, Manufacturer: Motch, Model No.: 135, Chuck: 30” 3-Jaw, Horsepower: 50 HP, Distance Under Turret: 40” / 16”, Overall Machine Height: 150" (12'-6") approx., Axis Travels: Z = 24”, X = 28”, Turret: (1) 6 Station Turret, Control: Fanuc CNC, Axis Drives: Fanuc AC, Swing: 46” ...more

Table Dia 192 ", Swing 204 ", Height 120 ", Age/Rtf 1975, Model 300 Series, Control GE FAUNC 15-TT, Additional Info:, GE FANUC 15-TT CNC Controls Set of Four 14" Face Plate Jaws (For use with Plain Table) RPM Indicator Table load Meter Flood Coolant, Mist Coolant, Chip Conveyor, Chip Guards H. & L.H. Ram Type with ...more

Make: HNK Machine Tool, Model: NT-10/12 F, Year: 2019, Machine Location: Upon Request, High-rigidity 2019 HNK NT-10/12F CNC vertical turret lathe built for accurate, high-speed turning of large-diameter parts, with a compact footprint and strong for heavy industrial machining., Year: 2019, Make: HNK Machine Tool ...more

Make: Haffner, Model: MAC 440-30, Year: 2020, Machine Location: Upon Request, (subject to buyer verification):, X-Axis Traverse Path: 181.10″ – 368.11″, Y-Axis Traverse Path: 36.61″, Z-Axis Traverse Path: 24.60″, Maximum Machinable Length: 161.41″ – 334.64″, Tool ...more

MANUFACTURER Giddings & Lewis MODEL NUMBER 512-VBM YEAR OF MANUFACTURE 2025 4 JAW MANUAL CHUCK 48” MAX TURNING DIAMETER 60” HEIGHT UNDER TOOL 49” (OPTIONAL PLUS 12” / 24”) SPINDLE MOTOR 75 HP AC VARIABLE SPEED SPINDLE SPEEDS 15-350 RPM NUMBER OF TOOLS 12 STATIONS PROGRAMABLE AXIS X ...more

Serial Number: 126240, Table Diameter: 125.98", Maximum Turning Diameter: 137.79", Maximum Height Under Rail: 98.45", Ram Stroke: 39.47", Ram Swivel: +/- 30 Degrees, Minimum Distance Between Rams: 20", Table Speeds (18):.8-40 RPM, Feeds (18):.0049-.2188 IPR, Threading, Inch: 1-11 TPI, Threading, Metric: 2-20 MM, Table ...more

Maximum Turning Length: 9"Maximum Turning Diameter: 11"Spindle Speeds: 3,500 RPMTurrets: (2) 12-Position, Fanuc 18i-TBDual Parallel Spindles(2) 10" 3-Jaw Chucks16 Pos. Gantry Load Stations (12" High Max.)Gantry UnloadChip ConveyorCoolant.

MODEL.: PMNX-1600, MAX TURNING DIAMETER.: 39.370", MAX SWING OVER BED.: 42", MAX CUTTING LENGTH.: 62", SPINDLE BORE.: 12.500", SPINDLE MOTOR.: 60 HP, SPINDLE SPEED.: 500, CHUCK SIZE.: 48", X AXIS TRAVEL.: 22.50", Z AXIS TRAVEL.: 44.88", JORGENSEN CHIP CONVEYOR, Machine Type.Lathes, Chucking, Cnc Manufacturer.MAZAK ...more

Max. Swing over Bed 11" Machining Length: 12" # Axis 2 Bar Capacity: 1" Max RPM: 6,000 RPM Turning Dia: 5" Main Motor: 5 HP Present Electrics: 220V/3/60 Haas CNC Control, Rigid Tapping, Parts Catcher, Spindle Orientation, Bar Feeder, Internal Work Light.

84 Inch Cincinnati Hypro Vertical Boring Mill, Model 7, Max Swing 91 Inches, 30 HP, 72 Inches Under the Rail, Two Ram Heads, Side Head, 4 Jaw Chuck, No Pit Required, $99,500.00 Loaded Out, Tom Hale Equipment Company, Inc., Best source of Vertical Boring Mills, Since 1981, Crossville, Tennessee Tom Hale - President ...more

Manufacturer:BULLARD, Model:54 SPIRAL DRIVE, Condition:Used - Good, Year:1945, Stock #:B600634, Status:For Sale, Serial #:24544, 54" Used Bullard Vertical Turret Lathe, Table Dia 50", Swing 56", Work Ht-U/R 39", Power 25 hp, RPM 60 RPM, Dimensions R-L 120" X F-B 9'6" X 120" High, Weight 24,000 Lbs., Table Size 50" ...more

2018 HAAS CL-1 CNC Chucking Lathe #7829, Swing: 11", Machining Length: 12", # Axis: 2, Collet Chuck, Bar Capacity: 1", Main Motor: 5 HP, Max RPM: 6,000 RPM, Turning Dia: 5", Present Electrics: 220V/3/60, Haas CNC Control, Rigid Tapping, Parts Catcher, Spindle Orientation, Bar Feeder, Internal Work Light.

MAZAK QUICK TURN 350, Model Quick Turn 350, CNC control Mazatrol 640T, Serial number 156012, Year of manufacture 08/2001, Chuck SMW Autoblok air chuck, 315-105 (4”), Maximum bar capacity 4”, Swing 26”, Max machining diameter 16”, Center distance 48”, Turret 12 station, Automatic tool eye ...more

CAPACITY:, Maximum Swing: 50.0", Maximum Cutting Diameter: 43.3", Maximum Cutting Height: 39.37", Spindle Motor: 75 HP, Spindle Speeds: 5-850 RPM, Live Spindle Speeds: 3,000 RPM, Live Spindle Motor: 15 HP, X-Axis Travel: 22.83", Z-Axis Travel: 39.37", Rapid Traverse, X,Z Axes: 787 IPM, Maximum Feed ...more

TECHNICAL, CAPACITY:, TABLE DIAMETER 39.4", SWING OVER BED 49.2", MAX. TURNING DIAMETER 39.4", MAX. TURNING HEIGHT 35.0", TABLE SPEEDS 13-1250 RPM, X-AXIS TRAVEL 22.2", Z-AXIS (RAM STROKE) 35", TABLE CAPACITY 2640 LBS., RAPID TRAVERSE, X/Z-AXES 945 IPM, CROSS RAIL ELEVATION, 4-STEP 23.6" (5.9" PER STEP), SPINDLE MOTOR ...more