Buy or Sell Your Vertical Lathe

Available in Grande Prairie, AB, Canada, this vertical sour inlet separator from C & T Equipment (Model U0845.2) s a diameter of 24 inches and a length of 90 inches. Built in 2007, it operates under a maximum pressure of 1480 psi and a maximum temperature of 100°F. The unit is portable and designed for ...more

SLITTING ARBORS. 7" DIAMETER, DISTANCE BETWEEN HOUSINGS. 64" MAXIMUM, RAFTED DESIGN. YES, DRIVE. QUICK DISCONNECT, OUTBOARD. GUIDED HYDRAULIC REMOVAL, VERTICAL ADJUSTMENT. HYDRAULIC, KEYWAY. 1", MOTOR. 15 HP.

Used Approximately 30 Gallon Stainless Steel Tank, Capacity: 30 gallons, Dimensions: 20: dia. x 24" straight side, Dish top, dish bottom, Mounted on stand, _UNKNOWN_ 30 GALLON, Capacity. 30 gal, Diameter. 1.67', Height. 2', Type of stainless. Stainless Steel, Type Of Heads. Dish, Vertical/Horizontal. Vertical ...more

Blanchard 26HCD-48 Vertical Rotary Surface Grinder, 48" Magnetic Chuck, 18" Vertical, 75 HP Geared Head, 26HCD-48 BLANCHARD ROTARY SURFACE GRINDER, S/N 15101 Year: 1980, STANDARD, Magnetic chuck ...more

Chuck Dia.: 84 inches Spindle (Horz/Vert): No Attached Power: 200 horsepower Swing: 87 inches Under Wheel: 24 inches Table Speeds: No Attached Grinding Wheel Width: No Attached inches Table Motor Horsepower: No Attached horsepower Grinding Wheel Dia.: 42 inches CNC Control: no Type of CNC Control: No Attached ...more

Stock #: 64268 Category: Vertical Motors HP: 100 RPM: 885.00 Frame: L445VP16 Enclosure: TEFCBB Make: Electric Volts: 460 Service Factor: 1.15 Condition: New Surplus Location: Henderson, NV.

Used Approximately 125 Gallon Stainless Steel Tank, Capacity: 125 gallons, Dimensions: 35" dia. x 35" straight side, Open top, flat bottom, Mounted on wheels, _UNKNOWN_ 125 GALLON, Capacity. 125 gal, Diameter. 2.92', Height. 2.92', Type of stainless. Stainless Steel, Type Of Heads. Flat, Vertical/Horizontal. ...more

824 Brown & Sharpe Micromaster Surface Grinder, Power Up & Down, Coolant Pump & Tank, Table Mounted Wheel Dresser, Attached Electrical Panel, As Is, 824 BROWN & SHARPE MICRO-MASTER SURFACE GRINDER, S/N 523-824-2119 Year: 1980, STANDARD, CAPACITY, Maximum work width and length. 8 x 24, Maximum work ...more

CAPACITY. 30,000 LBS, WIDTH OF DRUM. 29", OD COIL. 60", FLOOR TO PLATEN. 26" TO 44", VERTICAL TRAVEL. 18", HYDRAULIC DRIVE. YES, COIL ROTATION. YES.

SERIAL. 11C-505X-1438, MODEL. REGAL, SWING OVER WAYS. 16", SWING OVER CROSS. 10", CENTER DISTANCE. 60", SPINDLE SPEEDS. (12) 45 TO 1800 RPM, SPINDLE HOLE. 2-1/4", INCH THREADING. YES, METRIC THREADING. YES, TAPER. YES, THREAD DIAL. YES, CHUCK. 10" 3 JAW, MOTOR. 7.5 HP.

eBaySHIPPING IS AN ESTIMATE, WE ALSO HAVE A 35" 3 JAW.

MORBIDELLI CN 3A / CN 3B BORING MACH. (FEED THRU CNC W/DOWELING):POS #1: MORBIDELLI CN 3A CNC Feed Through Boring Machine -- 3,200 mm (126") Max. opening cap. in "X" axis left-right; 215 mm (8-1/2") min. opening cap.; 1,056 mm (41-1/2") max. "Y" axis front-back cap.; 100 mm (3.9") min. front-back capacity. -- Right ...more

SKU: 123639, Model: 8PX, Condition: Used, Electrical :, Max. Voltage: 600, Additional :, Phase: 3, Horizontal Bus Amps: 1200 A, Vertical Bus Amps: 440 A, Reference Number: Y7692-V018.

(1) Pre Owned 24"/33.75" X 120" MAZAK HERCULES AJAX ENGINE LATHE, Swing Over Bed 24”, Swing over Cross Slide 14.46, Swing over Removable Block Gap 33.75”, Length of Gap 16.34, Distance Beween Centers 10’, Spindle Bore 2.06”, Spindle Nose (Camlock Type) D1-8, Spindle Speeds 25 to 1,540 RPM ...more

Prab 12" Auger Type Loading Conveyor. Prab Vertical Feed Hopper. 15 HP Shredder Drive. Heavy Duty Base., Ideally suited for handling bushy wads of stringy turnings in continuous operations. Rated 800-1000 Kg/hr Steel and 250-300 Kg/hr.

QUOTATION, NASH TOOL & MACHINE SUPPLY, INC., 22701 Nagel Street, Warren, Michigan (Detroit suburb), 586-914-4478 cellular, e-mail—nashmachinery@yahoo.com, web—www.nashmachinery.com, BLANCHARD MODEL 36HD66 HIGH POWER ROTARY SURFACE GRINDER, (extra height column), Serial number 15106; built 1980 approx. ...more

2023 FANUC ER-4iA, # Axis. 6, Payload. 13.2 lb, Horizontal Reach. 550 mm, Vertical Reach. 880 mm.

SERIAL. #968012, MODEL. #3CK, AREA OF TABLE. 63-1/2" X 16-1/2", SPINDLE SPEEDS. (24) 15 TO 1500 RPM, LONGITUDINAL & CROSS FEEDS. (32) 3/8 TO 90 IPM, VERTICAL FEEDS. (32) 3/16 TO 45 IPM, LONGITUDINAL TRAVEL. 34", CROSS TRAVEL. 12", VERTICAL TRAVEL. 18", TAPER IN SPINDLE. #50 NS, DISTANCE CENTER LINE OF SPINDLE TO ...more

Used Approximately 1,000 Gallon Stainless Steel Mix Tank, Capacity: 1,000 gallons, Dimensions: 60" dia. X 80" straight side, Top, center-mounted agitator, Dished top, dished bottom, Mounted on (4) legs, _UNKNOWN_ 1,000 GALLON, Capacity. 1,000 gal, Diameter. 60", Height. 80", Type of stainless. Stainless Steel, Type Of ...more

Remanufactured with two year warranty, 156” diameter turntable, 90” of vertical clearance, 60,000 lb. Weight capacity, 600GPM@200PSI pump, automatic oil sludge removal removal, Maxon gas burner for heat..

SERIAL., MODEL. SERIES I, AREA OF TABLE. 42" X 9", SPINDLE SPEEDS, VARIABLE. 60 TO 4200 RPM, SPINDLE FEEDS.0015,.003,.006 IPR, LONGITUDINAL TABLE TRAVEL. 30", CROSS TRAVEL. 12", VERTICAL KNEE TRAVEL. 16", QUILL TRAVEL. 5", RAM TRAVEL. 12", DEPTH OF THROAT. 6-3/4" TO 18-3/4", TAPER IN SPINDLE. R8, HEAD TILTS ...more

Make: Kent, Model: CGS-618M, Year: 2019, Machine Location: California, Table Working Area: 6″ × 18″, Longitudinal Table Travel: 19″, Saddle Travel: 7.69″, T‑Slot: 1 × 9/16″, Spindle Motor: 3 HP, Spindle Speed: 3450 RPM, Grinding Wheel Size: 8″ × 3/4″ ...more

Used Approximately 3,500 Gallon Stainless Steel Mix Tank, Capacity: 3,500 gallons, Manufacturer: Falco, Serial: 3412, Year: 1994, Dimensions: 84" dia. x 144" straight side, Cone top, cone bottom, Top, center-mounted agitator, Material of construction: 304 stainless steel, Mounted on legs, 1994 FALCO 3,500 GALLON ...more

, Acer 3CVS 3HP vertical mill, used, 1996. s Newall DRO, power drawbar, 9" x 42" table, 3 hp motor, and R8 taper. Travel: longitudinal 28", cross 12", knee 16". Spindle speed 60-4,500 RPM. 3-phase, ideal for precision machining needs., Spec Sheet:, Acer 3CVS Mill, X-axis Power Feed, Maxi Rite Power Drawbar, Newall ...more

Stock #: 56296 Category: Vertical Motors HP: 200 RPM: 585.00 Frame: 507UP Enclosure: WPIIBB Make: Siemens Volts: 460 Service Factor: 1.15 Condition: Electrically O.K. Location: Toledo, OH.

Working AreaTable dimensions 63x13 in Table load capacity 990 lbs Number of T-slots 3 positions T-slots, width 0.7 in T-slots, spacing 3.1 in TravelsTravel X-axis 51.2 in Travel Y-axis 11 in Travel Z-axis 18 in Top slide travel 22 in Vertical Milling HeadSpeed range (2) 80-650 / 650-5000 rpm Spindle mount SK 40 / DIN ...more

SERIAL. 84-048MODEL. CR A-H-3-1/2NUMBER OF STANDS. 19NUMBER OF BASES. 2ROLL SPACE. 24"DIAMETER OF SHAFT. 2-1/2"VERTICAL RANGE. 5-1/2" MIN; 8-1/2" MAXBASE TO CENTERLINE OF LOWER SHAFT. 7-1/2"UPPER ARBOR ADJUSTMENT. 3"HORIZONTAL CENTER DISTANCE. 19"GEARING. RAFTED. 4 X 4 1 X 3U JOINTS. YESCONTROL PANEL. YESCOOLANT BASE. ...more

SERIAL. 002256, MODEL. BPV-1054, YEAR NEW. 2000, AREA OF TABLE. 10" X 54", SPINDLE SPEEDS (VARIABLE). 60 TO 4300 RPM, LONGITUDINAL TRAVEL. 38", VERTICAL KNEE TRAVEL. 18", CROSS TRAVEL. 18", QUILL TRAVEL. 5", QUILL FEEDS. 002,004 &.006 IPR, RAM TRAVEL. 17-3/4", DEPTH OF THROAT. 6.7" TO 23.8", TAPER IN SPINDLE. R8 ...more

CLANSMAN DYNAMIC MODEL#C2100 FORGING RAIL BOUND MANIPULATOR, 1500kg Lifting Capacity;, 1800mm Vertical Arm Length;, 2600mm Horizontal Arm Length, Speeds = 60 deg/s Slew, 1.0m/s Vertical, 0.8m/s Horizontal, 1.0m/s Long Travel, 270 deg cab rotation;, 0-750mm Gripper Size;, 400L Hydraulic Tank (aw46), (AW46);, 460VAC 3PH ...more

MOTOMAN EH 200 - 150 used robot, featuring 6 axes, a 441 lb payload, a 104.4" horizontal reach, and a 132.8" vertical reach. Ideal for demanding applications requiring precision and versatility., Yaskawa Motoman EH 200 - 150.

MAKE. LUCAS, HOLE. 2-1/2", VERTICAL TRAVEL. 36", BASE AREA. 27" X 13-3/4", OVERALL HEIGHT. 56".

SKU: 122689, Model: 8PX, Condition: Used, Electrical :, Max. Voltage: 600, Made In: CANADA, Additional :, Voltage: 600V, Horizontal Bus Amps: 1200A, Vertical Bus Amps: 440A, Phase: 3.

Kent 16″ x 40″ Automatic Surface Grinder, SGS-1640AHD, Inventory # 8141, Model: SGS-1640AHD, Table Travel: 43″, Saddle Travel: 17 3/4″, Working Capacity: 16″ x 40″, T-Slot: 1 x 9/16″, Spindle Speed: 1,750 RPM, Grinding Wheel: 14″ x 1 1/4″ x 5″, Vertical ...more

Stock #: 83045 Category: Vertical Motors HP: 100 RPM: 1775.00 Frame: 405LP Enclosure: TEFCBB Make: Reliance Volts: 480 Service Factor: 1.15 Condition: Electrically O.K. Location: Toledo, OH.

Used Red-D-Arc 12x12 Manipulator with Subarc Package, Model: MD12x12, Manufacturer: Key Plant, Serial: 07256, 12 ft of Vertical Travel, 12 ft of Horizontal Travel, 460 Volt Input, Bolt Down Base, Hand Pendant Controller, 90 Day Warranty.

Tank, 125 gallon, 316 stainless steel, 24" diameter x 48" straight side x 24" deep cone bottom. Vertical tank with quick opening top, last used as flash vessel for cheese cooling and evaporating, 6" diameter, tangential side inlet, 4" diameter center bottom outlet, with Tri-Clover fitting, 1.5 HP motor with ...more

SKU: 122661, Model: Y7692 V003, Condition: Used, Electrical :, Max. Voltage: 600, Made In: CANADA, Additional :, Voltage: 600V, Horizontal Bus Amps: 1200A, Vertical Bus Amps: 440A, Phase: 3.

TABLE SIZE: 67" X 15.7", T-SLOTS: 3 (0.7" AT 3.5" CENTERS), TABLE LOAD CAPACITY: 1,760 LBS., TABLE SWIVEL: ±45 DEG., TABLE LONGITUDINAL TRAVEL: 35.4" MANUAL / 34.6" AUTO, TABLE CROSS TRAVEL: 12.4" MANUAL / 11.8" AUTO, TABLE VERTICAL TRAVEL: 14.96" MANUAL / 14.17" AUTO, SPINDLE SPEEDS: (18) 30 - 1500 RPM ...more

Number of Stands: 9Shaft Diameter: 3"Roll Space: 26"Vertical Adjustment Range: 5.5" - 10"Horizontal Centers: 18"Base to CL of Bottom Shaft Distance: 8.5", (1) 7-Stand Base w/ (2) Stands & Side Guide Stands(1) 8-Stand Base w/ (7) Stands & Exit Straightening Fixture.

Stock #: 84224 Category: Vertical Motors HP: 250 RPM: 1190.00 Frame: 5009P Enclosure: WPIIBB Make: US Motors Volts: 4000 Service Factor: 1.0 Condition: Electrically O.K. Location: Toledo, OH.

Stock #: 92028 Category: Vertical Motors HP: 450 RPM: 1194.00 Frame: 5809TP Enclosure: WPIBB Make: Aurora Volts: 4160 Service Factor: 1.15 Condition: New Surplus Location: Toledo, OH.

Stock #: 72811 Category: Vertical Motors HP: 500 RPM: 890.00 Frame: 5810P Enclosure: WPIBB Make: US Motors Volts: 460 Service Factor: 1.15 Condition: Electrically O.K. Location: Toledo, OH.

Iowa Precision Coil Car, Model CC20M, Maximum Coil Weight: 20,000 lbs., Coil Width: 60", Coil O.D.: 72", Vertical Lift: 14" Approx., -Less Hydraulics and Controls (were supplied from Uncoiler), -0verall Size: 56" L x 38" W x, 3,000 lbs., -In Storage: Toledo, OH.

MODEL #: 15, SERIAL # 400-1500-18-4116, 18" SWING, 60" CENTERS, 20-2000 RPM, 10" SWING OVER CROSS SLIDE, 2.5" SPINDLE HOLE, 3 JAW CHUCK, STEADY REST, TAPER, INCH AND METRIC THREADS, TOOL POST HOLDER, 117" LR 50" FB x 50" TALL, 6500 LBS ESTIMATED WEIGHT, GOOD CONDITION.

, SP MFG 3-JAW LATHE CHUCK 10 in with plain back mount. Used, suitable for various tooling tasks. Overall diameter: 10, center hole: 2.25, height: 5.25. Ideal for those seeking reliable lathe accessories., Spec Sheet:, SP MFG 3-JAW LATHE CHUCK 10 in - w/ PLAIN BACK MOUNT, USED, Brand: SP MFG, Type: 3 Jaw Chuck ...more

This is a very unique USED Emco 4" 3-Jaw self-centering universal lathe chuck with solid one-piece jaws and a #5 Morse Taper Shank. It is in excellent condition and is non-rotating type chuck. You would use this on fixtures on milling machines or drill presses, like rotary tables. DOES NOT INCLUDE THE CHUCK KEY! We ...more

C-Hook, -30,000# x 36" Capacity, -Arm Length: 30", -Frame Thickness: 4", -Vertical Opening: 24", -Parking Stand Included, -Shipping Weight: 3,770 lbs (less Parking Stand), -Overall Size: 63" L x 22" W x 72" High, -In Storage: Toledo, OH.