go to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Buy or Sell Your 500 HP Air Compressor

warning
AI-ranked results for 500hp air compressor - closest matches first

Arizona Boiler Company Inc. #PX-150, Thermal Oil Heater, 500 HP, 19 MMBH, 125 Psi @ 650 deg F, 500 GPM, 2012

C3 Surplus LLC | Miami, FL
Seller: C3 Surplus LLC
Location: Miami, FL
Mfr: Arizona Boiler Co.
Model: INC. PX150
Year: 2012
Arizona 500 HP Thermal Oil Heater PX-150, 19 MMBH, 650°F, Ultra-Low Nox, Manufacturer: Arizona Boiler Company, Inc., Model: PX-150, Serial: 12 7-8, Max Working Pressure: 125 Psi @ 650°F, Max Design Temperature: 650°F, HP: 500, Coils: Two Double Helical 4" SA-106B Seamless Pipe, Thermal Fluid: Light Oil ...more

7.87" Nakata #CFPBE, Pin Barrel Rubber Extruder, 80 pins, 500 HP Reliance Electric motor, 18:1 L/D ratio, 460 VAC, 2008, (3 available)

Soberay & Sons Ltd | Cleveland, OH
Category: Extruders
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Model: CFPBE
Year: 2008
Item 6276 - One (1) Used Nakata 200mm CFPBE Pin Barrel Rubber Extruder, 18:1 L/D, Reliance 500 HP 1790 RPM 460 VAC inverter duty motor,18:1 L/D ratio, 80 pins, no head, forced lube system, PFR power feed roll external bearings and adjustable scraper blade, new 2008.

15 HP Hockmeyer #HV-15, Stainless Steel shaft & blade, air over oil hyd.lift, 49" rise, 42" L shft on 24" H base floor mounted, variable speed, 220/440V., #17428

Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Hockmeyer
Model: HV-15
Used 50 H.P. Hockmeyer Disperser, stainless steel shaft and blade, air over oil hydraulic lift, 49" rise, 42" long shaft, on 24" high base floor mounted, variable speed, 220/440 volt, As is.

700 cfm, 100°F, 100 psig, Parker Zander, refr. dryer air compressor, R 404 refrigerant

D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Parker
FLOW 700 CFM, PRESSURE 100 PSIG MIN MAX 60-203, INLET TEMP 100 F 41-140 MIN MAX, AMBIENT TEMP 100 F 41-115 MIN MAX, R 404 REFRIGERANT.

Freightliner #Cascadia, Class 8 Sleeper Semi Tractor, Tandem Axle, Detroit DD15, 2016

Revelation Machinery | Chicago, IL
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Freightliner
Model: CASCADIA
Year: 2016
Make: Freightliner, Model: Cascadia, Year: 2016, Machine Location: Texas, 2016 Freightliner Cascadia sleeper truck built for regional and long-haul freight applications with an aerodynamic sleeper cab, tandem-axle Class 8 chassis, air ride suspension, and common Detroit DD15 diesel power., Manufacturer Freightliner ...more

103 Ton, Hitachi #RCUG-150AHYZ1 H-Series, air cooled chiller, R407c refrigerant

Perry Videx LLC | Hainesport, NJ
Category: Chillers
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Hitachi
Model: RCUG-150AHYZ1
Pouit vzduchem chlazen chladic stroj Hitachi "H Series" model RCUG 150AHYZ1. 103 tun. Vyrobeno v roce 2011. Chladivo R407C, napjen 380, 415 volt / 50 Hertz. Jednotka m vkon 363 kW, 103 americkch chladicch tun a 312 000 180 kcal/hod. M sten hermetick roubov kompresor model 60ASCCW-Z(2)., HITACHI RCUG 150AHYZ1.

Sullivan D1600PHCA4WAF, Compressed Air, 3490 hours, S/N: 511020, 2019

Thompson Tractor - Greg | Tuscaloosa, AL
Seller: Thompson Tractor - Greg
Location: Tuscaloosa, AL
Mfr: Sullivan
Model: D1600PHCA4WAF
Year: 2019
Horsepower 600.0 hp.

Worthington, Compressor Cylinder Hp

Collicutt Energy Services | Red Deer, AB
Seller: Collicutt Energy Services
Location: Red Deer, AB
Mfr: Worthington
WORTHINGTON, COMPRESSOR CYLINDER, MODEL HP, 4.625" BORE, 4500 MAWP.

SCM #ACCORD-30-FX-M, CNC Router, 3-Axis, 143.7" X, 52" Y, 8.5 KW, 24000 RPM, 16 position tool changer, 2013, 2013

Aucto | San Francisco, CA
Category: CNC Routers
Seller: Aucto
Location: Prospect Heights, IL
Mfr: Scm
Model: ACCORD 30 FX-M
Year: 2013
THE SCM ACCORD 30 FX-M IS A CNC MACHINING CENTER DESIGNED FOR FLEXIBLE PRODUCTION OF PANELS INCLUDING SOLID WOOD, PLYWOOD, CHIPBOARD, AND MDF. THE MACHINE S A RIGID MOBILE GANTRY STRUCTURE AND A MULTIFUNCTION ALUMINUM WORKTABLE SUITABLE FOR NESTING APPLICATIONS. TECHNICAL INCLUDE AN X-AXIS WORKING AREA OF 3,650 MM AND ...more

43" Timesavers #2321-24-66, Segmented Widebelt/Polisher, 2-Head, 5" thick, 15-45 FPM, 4260 CFM, unused

RT Machine | Hughesville, PA
Seller: RT Machine
Location: Hughesville, PA
Mfr: Timesavers
Model: 2321-24-66
Timesavers Model 2321-24-66 Two Head 43" Segmented Widebelt/Polisher : Abrasive belt size: 52 x 103" Main motor first head: 30HP Main motor second head: 25HP Maximum width stock: 51" Minimum part size: 6" x 6" w/vacuum bed Maximum thickness opening: 5" Infeed loading area: 14" Feed speed: 15-45FPM Approximate full ...more

15000 Ton, Koolant Koolers #HCV15000 PR-NF-FILT-H chiller, R-22, 15 HP, pre-owned

Aleco Machinery Sales | Milwaukee, WI
Category: Chillers
Seller: Aleco Machinery Sales
Location: Milwaukee, WI
Mfr: Koolant Koolers
Model: HCV15000
Listing : Pre Owned Koolant Koolers Model Hcv 15000 Pr-Nf-Filt-H Chiller Serial Number: 17776 Compressor Hp 15 Pump Hp 3 Kw Refrigerant Type R-22 Lbs Ref 25 Power Req 460/3/60 Amps 41.0 15000 Ton Chiller Off A Cincinnati Cl707.

540 HP Caterpiller #C15, diesel engine, 2100 RPM, Tier 4, sound attenuated enclosure 1, electronic governor, 2015

DEPCO Power Systems | Houston, TX
Category: Diesel Engines
Seller: DEPCO Power Systems
Location: Houston, TX
Mfr: Caterpiller
Model: C15
Year: 2015
NotesNew surplus 540 HP C15 industrial engine. Industrial C rating. The engine does not have all the after treatment equipment and is being sold without it., Product InformationEngine BrandCaterpillarAir CleanerDry TypeEngine ModelC15Flywheel HousingSAE 1Engine Serial#LDN01609CoolingNoneEngine ...more

Sullair TSR32, Compressed Air, 22500 hours, S/N: 201410150059, 2014

Thompson Tractor - Greg | Tuscaloosa, AL
Seller: Thompson Tractor - Greg
Location: Tuscaloosa, AL
Mfr: Sullair
Model: TSR32
Year: 2014
Horsepower 333.0 hp.

38 cfm, 116 psi, Hodge #HD10 HP rotary screw type compressor w/dryer & tank, new not installed

CNC Exchange div. Gray Machinery Co. | Prospect Heights, IL
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Hodge
Model: HD10
Year: 2022
Hodge HD10 HP Rotary Screw Type Compressor with Dryer and Tank, New not installed, Hodge HD10 HP Rotary Screw Type Compressor with Dryer and Tank, New not installed, Hertz 9602-KA HOWS 70 Roto Inject Oil Water Separator N/A 1, Hertz 9602-KA HOWS 70 Roto Inject Oil Water Separator N/A 2, Samuel A10049 120 Gal Vertical ...more

200 HP Vilter 4416, 16-Cylinder Reciprocating Compressor Package, Belt Driven, 460 V, 1200 RPM

Genemco | Hearne, TX
Seller: Genemco
Location: Hearne, TX
Mfr: Vilter
Model: 4416
Vilter 4416 16-Cylinder Reciprocating Compressor. The compressor is missing the data plate. Number of Cylinders: 16, Maximum RPM: 1200, CFM @ Maximum RPM: 597(1014). Suction Connection: 5 inches. Discharge Connections: Two 3 Inches. Westinghouse AC Motor - HP: 200, RPM: 1780, Hz: 60, PH:3, Frame: 447T, Max AMS: 40c ...more

Saniserv #424, 40 qt twin soft serve ice cream machine, floor model, 1987

Machinery & Equipment Co | Brisbane, CA
Category: Food Freezers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Saniserv
Model: 424
Year: 1987
Saniserv Model 424, 40-quart twin soft serve ice cream machine, floor model. Unit manufactured 1987, is 440 volt, 3-phase, dasher has (2) 1 HP motor and compressor has (2) 4.5 HP, runs on R22 refrigerant is 15# suction, portable. Serial number 6105045. Type: Ice Cream Freezer, Refrigerant: R-22, Capacity: 40 quarts ...more

43" Timesavers #2321-24-06, Segmented Widebelt/Polisher, 2-Head, 5" thick, 15-45 FPM, 3500 CFM, unused

RT Machine | Hughesville, PA
Seller: RT Machine
Location: Hughesville, PA
Mfr: Timesavers
Model: 2321-24-06
Timesavers Model 2321-24-06 Two Head 43" Segmented Widebelt/Polisher : Abrasive belt size: 43 x 75" Main motor first head: 25HP Main motor second head: 20HP Maximum width stock: 42" Minimum part size: 6 x 6 with vacuum bed Maximum thickness opening: 5" Infeed loading area: 14" Feed speed: 15-45FPM Approximate full ...more

Glatt #WST30, Fluid Bed Dryer, 60000 kcal/hr. Heating, 6 bar, 18.5 kW, 220 V

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Glatt
Model: WST30
Pouit fluidn suika Glatt WST30, Motor 18.5 KW, 3/60/220 volt, Ovldac panel 110 volt, Vhevn kapacita pry, 60000 kcal/hod, Kompresor vzduchu 6 Bar, Sriov slo 5547, GLATT _UNKNOWN_.

400 psig. Carrier #5F40, Air Conditioning Reefer Compressor Skid, good condition

U S Combustion Products Inc | Ketchum, ID
Seller: U S Combustion Products Inc
Location: Ketchum, ID
Mfr: Carrier
Model: 5F40

Elumatec #DG 244, Twin Head Double Miter Saw for Window Profile Fabrication, 25' cut bed length, 550 mm diameter Saw blade, 90-45 deg. Pivot range, 2250 RPM, 95 psi, 5.5 HP, 2013

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Elumatec
Model: DG 244
Year: 2013
ELUMATEC DG 244 Twin Head Double Miter Saw For Window Profile Fabrication - 7.5 Meter (25 ft)CNC double-head miter saw with Elumatec reliable principle “Cutting from below"; provides unhindered access to support table with a large saw blade diameter and optimal use of the saw blade offers an ideal cutting ...more

Cam-Wood #CS-18AAT-16/EM-300, End Matcher w/Optimizing Cutoff Saw, 12" width, 10.5" min. L, 300 FPM feed, (2) 5.5 HP spindle, 1.57" spindle diameter, 2026, new

Ex-Factory | Charlotte, NC
Category: End Matchers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: CS-18AAT-16/EM-300
Year: 2026
CAM-WOOD 16' Pusher Type Cutoff Saw with Crayon Marking (Optional) connected to a CAM-WOOD 12" wide End Matcher; System width capacity is 12" with a maximum inbound board length of 16' (as priced here). 8' and 12' Saws are also available. Call Jeff for price deduction. Data: -- Cut-Off Saw is arranged ...more

8.5" Bore, Ingersoll-Rand, Compressor Cylinder, 12" Stroke, 350 psi MWP, 2" Piston Rod

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Ingersoll-Rand
Pouit vlce stlaovacho stroje Ingersoll Rand o prmru 8,50" a zdvihu 12,00". MWP 350 psi. Prmr pstov tye 2,00", naposledy pouit na integrlnm plynovm motoru SYG. Obsahuje rm o prmru piblin 12,00", typu 3GL2K48. Sac ventily 48 KIR, vfukov ventily 49K2R. Sriov slo #3T7090 a 3T7101. K dispozici celkem 12 kus., INGERSOLL ...more

100 HP Vilter 448, 8-Cylinder Reciprocating Compressor Package, Belt Driven, 230/460 V, 1200 RPM, 232 CFM

Genemco | Hearne, TX
Seller: Genemco
Location: Hearne, TX
Mfr: Vilter
Model: 448
Vilter 448 8-Cylinder Reciprocating Compressor. Serial No: 15760 A BRC, Order No: C 99147-6, Model: 448, Previous Refrigerant: Ammonia. Number of Cylinders: 8. Maximum RPM: 1200, Bore & Stroke(in): 114x89, Displacement M3hr: 232. Lincoln Motor - HP: 100, RPM: 1770, FR: 404T, Volts: 230/460, PH: 3, HZ: 60, Time ...more

200 HP Frick #RWB-II-316, Rotary Screw Compressor Package, 460 V.

Genemco | Hearne, TX
Seller: Genemco
Location: Hearne, TX
Mfr: Frick
Model: RWBII316
Frick Rotary Screw Compressor Package. Package - Model: RWBII 316B. Serial No: S0295PFMFT0AA03. Frick Sales Order: 28092801000. Refrigerant: R-717. Max Design Pressure: 300 PSIG. Frick Rotary Bare Compressor - Model: TDSH283S. Serial: 1602G. Refrigerant: R717/R22. Volume Ratio: 2.2-5.0. Max RPM: 3600. Max Design ...more

500 HP 3580 RPM Baldor, Frame 5009Z, weather protected enclosure type 2, 2300/4160 Volts, 3-phase

Genemco | Hearne, TX
Seller: Genemco
Location: Hearne, TX
Mfr: Baldor
Frame: 5009Z
Baldor Electric Motor - 500 HP. Number 20E009-0330. S/N: N071/0174-01081612. Motor : 3580 rpm, 2300 / 4160 V, 109/61 amps, 60 Hz, 3 phase. Continuous duty. Enclosure: WPII. Frame: 5009Z. Insulation class: F. NEMA code: F. Weight: 6000. Overall dimensions: 4 ft. 4 in. L x 4 ft. W x 4 ft. 4 in. H.(H10).

2013 cfm, 132 psig, Atlas Copco #GA315, Rotary Screw Air Compressor, 350 HP Siemens motor, 4160 Volt, 3PH, (2 available)

Savona Equipment | Savona, BC
Seller: Savona Equipment
Location: Savona, BC
Mfr: Atlas Copco
Model: GA315
Year: 2009
Atlas Copco GA315 Air Compressor, Quantity: (2) Units Available, Make: Atlas CopcoModel: GA315Type: Air CompressorStyle: Rotary Screw Compressor - Stationary, Skid-MountedYear: 2009Hours, Unit 1: Hours: 26,387 Hours on MeterLoad Hours: 12,846 Hours on MeterHours, Unit 2: Hours: 24,448 Hours on MeterLoad Hours: 7,632 ...more

20 Ton, Koike Aronson #WRD20-AIR / WRI-20, air power pnuematic turning roll, 40000 lb., 2023

Mitrowski Welding Equipment | South Houston, TX
Seller: Mitrowski Welding Equipment
Location: South Houston, TX
Mfr: Aronson
Model: WRD20-AIR
Year: 2023
Used Koike Aronson Pnuematic Turning Rolls, Model: WRD20-AIR / WRI-20, Built in 08/2023, 40,000lb Capacity, 6'' - 22 ft Diameter Range, 1.0 - 50 IPM Wheel Speed Range, 4HP Air Motor, 3/4'' Air Inlet, Requires 95 PSI @ 130 CFM, Low Profile Manual Truck Package, Manual Locking, 90 Day Warranty.

4.75" Bore, Ariel, Compressor Cylinder Jgp, 500 Mawp

Collicutt Energy Services | Red Deer, AB
Seller: Collicutt Energy Services
Location: Red Deer, AB
Mfr: Ariel
ARIEL, COMPRESSOR CYLINDER, JGP, 4.75", 500 MAWP.

Losma #Icarus-L, Mist Collector, H13 filter, 1890 m/h max. air flow, 1.5 kW, 2012

Vander Ziel Machinery Sales | Alto, MI
Category: Air Cleaners
Seller: Vander Ziel Machinery Sales
Location: Alto, MI
Mfr: Losma
Model: ICARUS L
Year: 2012
Losma Mist Collector, Model Icarus L with High Efficiency Filter, H13, Serial # 0120, Asset # 14424, Power, 50 HZ 1.5 kW, Power, 60 HZ 1.5 kW, Max. Air Flow, 50 HZ 1680 m^3/h, Max. Air Flow, 60 HZ 1890 m^3/h, Head 91 mm H20, Nose Level 73.8 dBa, Inlet 200 mm, RPM 50 Hz 2880 RPM, RPM 60 Hz 3410 RPM, Overall Dimensions ...more

375 HP Mack #E7-ETECH, remanufactured standard long block engine

Big Bear Engine Company | Parker, CO
Category: Diesel Engines
Seller: Big Bear Engine Company
Location: Parker, CO
Mfr: Mack
Model: E7 ETECH
Year: 2023
We offer a variety of both, over the road truck and industrial replacement engines for the Mack E7. Our remanufactured Mack E7 engines (Mechanical, ASET, ETech) come as a 3/4 long block and are not running trim condition. Our remanufacturing process strips the core down to the bare block whereas the camshaft ...more

Kice Industries #VR7-3, Stainless Steel venturi jet filter receiver

JM Industrial LLC | Millwood, WV
Category: Dust Collectors
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Kice
Model: VR7-3
Unused Kice Industries Stainless Steel Venturi Jet Filter Receiver VR7-3, Serial No: 366623-8, 304 stainless steel construction, all gasketed and bolted sections., Assembled filter system measures 24" diameter X 75.5" tall., Quantity of seven- 4.5" bag filters with a 36" length (cages included, no bags ...more

350 HP Cleaver-Brooks #CB, Steam Boiler, 15 PSI, 14,288,000 BTUH, 2002 (3 available)

C3 Surplus LLC | Miami, FL
Seller: C3 Surplus LLC
Location: Miami, FL
Mfr: Cleaver-Brooks
Model: CB
Overview, This 2002 Cleaver Brooks CB 350 HP Steam Boiler delivers reliable steam generation with dual fuel capability and fresh professional service in 2025. Operating at 15 PSI steam pressure with 14,288,000 BTU/hr input, this boiler s natural gas and No. 2 oil firing options. Recently repaired by Miller & ...more

21000 cfm @ 30 S.P., New York Blower #AF-40, Airfoil fan pressure blower, size 305, 70 F, 0.075 air density, 152 BHP, 200 HP, 460 V., 2003

Cooper Industries Llc | Millwood, WV
Seller: Cooper Industries Llc
Location: Millwood, WV
Mfr: New York Blower
Model: AF-40
Year: 2003
Item 16542: 21,000 CFM @ 30″ SP Surplus 200HP NYB Airfoil Fan Pressure Blower, –, New York, Blower Size 305, Model AF-40, with AF wheel, arrangement 4. Rated at 21000 cfm at 30″ SP at 70, degrees at.075 air density at 152 BHP., Motor is 200 hp, 3600 rpm, 3-60-460 volt, Frame 444TS. NYB File # ...more

Inline Packaging Systems #700VS, wraparound labeler, 100 lables/minute

Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Inline Packaging Systems
Model: 700VS
Inline Packaging Systems Paradigm 700VS Wraparound Labeler s adjustable label heights from 1" to 4.5", and lengths from 1" to 14". It operates at variable speeds up to 1,000 IPM, achieving a maximum rate of 100 labels per minute. The label gap ranges from a standard 1/8" to 1/4" on some configurations. With a core ...more

200 HP ABB, ACS800-37-0260-7, Variable Frequency Drive (VFD), 600 Volts, S/N 1060800218

Lenmark Industries | Langley, BC
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Abb
Model: ACS800-37-0260-7
SKU: 115127, Model: ACS800-37-0260-7, Condition: Used, S/N: 1060800218, Electrical :, Horsepower: 200 hp, Voltage: 600 volts, Phase: 3-phase, Amps: 180 amps, Addition Options: A013+C134+H351+H353+K454+L504+P902+Q951+R700, Dimensions: 80.00 (H) x 30.00 (W) x 50.00 (L) inches, Additional :, Model + Options: ...more

Williams #400XL, industrial paper shredder, 1999

G-2000 | Toledo, OH
Category: Paper Shredders
Seller: G-2000
Location: Toledo, OH
Mfr: Williams
Model: 400XL
Year: 1999
, Williams 400XL Industrial Paper Shredder, Year.1999, Model.19939, Motor HP.500, Motor RPM.900, Feed Opening.40" x 80", Discharge Opening.40" x 80", Rotor Diameter. 40", Rotor Width. 80", Thru put capacity. 35-Tons/Hr, Finish product (approx.). 4", Previous application used to shred industrial type paper, Machine ...more

55 cfm, 125 psig, Kaeser #SM15, rotary screw air compressor with TC31 refrigerated dryer, 15 HP, 2022

Equipment Hub | Decatur, GA
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Kaeser
Model: SM15
Year: 2022
Stock #: 163260014, Brand: KAESER, Model: SM15, Condition: Used, Year: 2022, Ambient Temperature: 40-115°F, Rated Power: 15 horsepower, Max. Working Pressure Ps: 125 PSIG, Rated Motor Speed: 3525 rpm, Volume Flow Rate: 55 cmf (125psig), Phase: 3, Frequency: 60, Voltage: 460/266, 230/133, 208/120, Full Load ...more

100 HP Cleaver-Brooks #CB-900-100, Packaged Steam Boiler, Low Pressure Dual Fuel Gas Oil, 15 PSI Container Mounted Skid, 1979

C3 Surplus LLC | Miami, FL
Seller: C3 Surplus LLC
Location: Miami, FL
Mfr: Cleaver-Brooks
Model: CB-900-100
Year: 1979
OVERVIEW, This is a Cleaver-Brooks CB packaged steam boiler, Model CB-900-100, rated 100 boiler horsepower. Packaged firetube vessel fired on natural gas or oil, factory-built by the Cleaver-Brooks Division of Aqua-Chem Inc., Milwaukee, Wisconsin, with an integral Cleaver-Brooks forced-draft burner, factory control ...more

17.5" x 23.5" Herbold #SML-45/60, granulator, 100 HP, Kice system (2 available)

Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Herbold
Model: SML 45/60
Used 17.5" x 23.5" Herbold SML 45/60 Granulator With Kice System 100 HP 3 Knife Open Rotor 2 Bed Knives 17.5" Rotor Diameter Kice System (1) 12" Zig Zag Aspirators, 2 Kice Cyclones, 1 Air-Lock Control Panel 2 Units Available.

Vilter, Compressor Frame

Collicutt Energy Services | Red Deer, AB
Seller: Collicutt Energy Services
Location: Red Deer, AB
Mfr: Vilter
VILTER, COMPRESSOR FRAME, 12K448E, REMANUFACTURED.

200/100 HP Denison #PXX-1223-602-R-1P, Hydraulic Power Pak, (2) Hydraulic Pumps, 500 gallon Tank, 3500 psi, 1800 RPM

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Denison
Pouit hydraulick zdroj sestvajc ze (2) hydraulickch erpadel Denison model PXX-1223-602-R-1P 3500 psi, 1800 ot/min s (1) motorem 200 HP a (1) motorem 100 HP, (1) pomocnho erpadla, 15 HP 3500 ot/min, (1) ndre o objemu 500 galon., DENISON PXX-1223-602-R-1P.

200 HP Frick RWB-II-60, Rotary Screw Compressor Package, 460 V, 3600 RPM, 300 psig

Genemco | Hearne, TX
Seller: Genemco
Location: Hearne, TX
Mfr: Frick
Model: RWB-II-60
Frick RWB II 60 Rotary Screw Compressor Package - Unit Model No: RWB-II-60, Unit Serial No: S0330MFMDT0AA7, Frick Sales Order: 292921, Refrigerant: R22, Max. Speed RPM: 3600, Max Design Pressure(PSIG): 300. Frick Rotary Bare Screw Compressor - Model No: TDSH-163S, Part No: 692108, Serial No: 10241N85854717ZR1, Max ...more

Air Compressors - Lot

Investment Recovery Services Int'l | Cincinnati, OH
Seller: Investment Recovery Services Int'l
Location: Cincinnati, OH
Air Compressors, IR Air compressor Model: ssr-ep25, Quincy Air Compressor Model: osb30ama32, Quinch Air Compressor Model: qcd-30, Quincy Air Compressor Model: OMB2AC22EF, Quincy Air Compressor Model: NA, Compare Air Compressor Model: 148PAUS, Sullair Air compressor Model: 407106.

Superfici, automatic compact spray finishing system, 35-7/16" passline height, Laminar dryer

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Superfici
Year: 2007
SUPERFICI Compact Spray Automatic Spraying Machine; System is ideal for medium to high volume production. Product: Kitchen cabinet components, panels, furniture components, doors, etc.Coatings: TBD EQUIPMENT S:Pass-line Height: 900 mm (35-7/16")Operating side: RH, as viewed from inlet of line.Work piece Dimensions ...more

30" Heinemann #DN-400, hollow spindle CNC lathe, 12" hole, 100 HP, air chuck, tool holder rail w/ATC, Fanuc 16-TT, hydraulic Steady Rest, retro 2006

Deal Makers Machinery | Thousand Oaks, CA
Seller: Deal Makers Machinery
Location: Thousand Oaks, CA
Mfr: Heinemann
Model: DN-400
HEINEMANN 12" HOLLOW SPINDLE CNC LATHE Price: $24,950 Subcategory: Oil Field & Hollow Spindle Lathes Swing: 30" Spindle hole diameter: 12" Manufacturer: Heinemann Model: DN 400 Condition: Used, FANUC 16-TT CNC RETROFIT IN 2006, HYDRAULIC STEADY REST, 100 HP, AIR CHUCK, TOOL HOLDER RAIL WITH AUTO TOOL CHANGER ...more

55 cfm, 230 psi, Kaeser #SM-15, screw compressor with dryer, 15 HP, 2015

Lenmark Industries | Langley, BC
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Kaeser
Model: SM-15
Year: 2015
SKU: 139577, Model: SM 15, Year: 2015, Condition: Used, S/N: 1555, CFM: 55 cfm, Compressor Air Type: Rotary Screw, Power Type: Electric, Max. Pressure: 230 psi, Tank Size: 71.3 gal, History :, Hours: 7790, Electrical :, Horsepower: 15 hp, Voltage: 230 volts, Phase: Single-phase, Made In: GERMANY, Dimensions: 68.00 (H) ...more

350 HP Cummins #N14, mechanical remanufactured long block engine - CPL 1532

Big Bear Engine Company | Parker, CO
Category: Diesel Engines
Seller: Big Bear Engine Company
Location: Parker, CO
Mfr: Cummins
Model: N14
Year: 2023
We offer a variety of both, over the road truck and industrial replacement engines for the Cummins N14 CELECT. Our remanufactured Cummins N14 engines (N14 Mechanical, N14 CELECT, N14 CELECT+) come as a 3/4 long block and are not running trim condition. Our remanufacturing process strips the core down to the bare block ...more

Paint Pump Station, Binks #104009, 3:1 Ratio, 20/40 cylcles/min. Pump, 10 liter Tank, 21 bar Active Surge Eliminator

Lenmark Industries | Langley, BC
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Binks
Model: PAINT PUMP STATION
SKU: 27535, Model: 104009, Condition: Used, Dimensions: 65.00 (H) x 25.00 (W) x 40.00 (L) inches, Additional :, Comes With, Maple 15/3 Pump, - Part Number: 104009, - Ratio: 3:1, - Fluid Output @ 60 cycles/min: 22.5 L/min, - Max. Continuous Cycle Rate: 20 cycles/min, - Max. Intermittent Cycle: 40 cycles/min, - Fluid ...more

110 Ton, Arctichill, chiller with safety switch

Lenmark Industries | Langley, BC
Category: Chillers
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Arctichill
Year: 2018
SKU: 138393, Model: ACA110AT356F, Year: 2018, Condition: Used, S/N: AC1804877, Made In: UNITED STATES, Dimensions: 110.00 (H) x 96.00 (W) x 162.00 (L) inches, Additional :, Chiller, Nominal Capacity: 110 Ton, Design Conditions:, - Fluid = 30% PG, - Fluid In/Out: 52F / 42F, Rated Power Supply, For 575 Volts 3-Phase:, - ...more

100 HP Vilter 448, 8-Cylinder Reciprocating Compressor Package, Belt Driven, 460 V, 1200 RPM, 320/162 psig

Genemco | Hearne, TX
Seller: Genemco
Location: Hearne, TX
Mfr: Vilter
Model: 448
Vilter 448 8-Cylinder Reciprocating Compressor. Serial No: 19903 AS, Order No: 0-44163-2, Size: AS448B. High Side Design Pressure: 320 PSIG. Low Side Design Pressure: 162 PSIG. Voltage: 200. Number of Cylinders: 8. Compressor has been The Compressor has been freshly painted. Leroy-Somer Motor - HP: 100, FR: 404 T, Hz: ...more

Matsui #MJ3-50-U, 47 cfm dryer w/ hopper, 176°F-320°F, 2014

Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Matsui
Model: MJ3-50-U
Year: 2014
Used 47 CFM Matsui MJ3-50-U Dryer, W/ Hopper 4 kW Process Heater 3.2 kW Regen Heater Dew Point: -40C (86°F, 75% RH) Temp. Range: 176°F – 320°F 3 Cu/Ft (110 LBS) Drying Hopper Capacity Control Circuit: 100V 70 PSI Compressed Air Primary Conveying Distance: 30 FT Secondary Conveying Distance: 15 FT ...more

Danckaert #44, Vertical Band Resaw, 44" x 5" Bandsaw, 14" cut, 60 & 100 HP, 24' lumber length

Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Danckaert
Model: 44
DANCKAERT - 44,.ResawAir Strain 44"; x 5"; Bandsaw.s & : -- McDONOUGH Center Split Feed Works. -- Wheel is supported on both sides - not cantilevered. -- Pressured guides. -- McDONOUGH Infeed Rolls. -- Max. Cut: 14";. -- New Dynamic brake. -- 60 & 100 HP. -- Control Cabinet (has battery backup and resistors to ...more

43" Timesavers #2321-24-66, Segmented Widebelt/Polisher, 2-Head, 5" thick, 15-45 FPM, 4000 CFM, unused

RT Machine | Hughesville, PA
Seller: RT Machine
Location: Hughesville, PA
Mfr: Timesavers
Model: 2321-24-66
Timesavers Model 2321-24-66 Two Head 43" Segmented Widebelt/Polisher : Abrasive belt size: 43 x 75" Main motor first head: 25HP Main motor second head: 20HP Maximum width stock: 42" Minimum part size: 6 x 6 with vacuum bed Maximum thickness opening: 5" Infeed loading area: 14" Feed speed: 15-45FPM Approximate full ...more

Rofin Sinar #880-HF, Laser Welder, w/ Koolant Koolers Chiller, 480 V., 25 HP

VX Machinery | Sylvania, OH
Category: CNC Lasers
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Rofin
Model: 880-HF
, ROFIN SINAR 880 HF Laser Welder, 480v, 125 Amp, 60Hz, Koolant Koolers Chiller, Model No. SCV25,000-2PR-NFZFIL7, Compressor 25 HP, Pump 5 HP.

300 HP GEA-FES 230GL, Rotary Screw Compressor Package, 460 V, 3500 RPM, 406 psig, 2001

Genemco | Hearne, TX
Seller: Genemco
Location: Hearne, TX
Mfr: Gea-Fes
Model: 230GL
Year: 2001
GEA FES Rotary Screw Compressor Package: FES Contract No: 01519011, Model No: 230GL, Serial No: 01519011. GEA Bare Screw Compressor: Model No: R-52, Serial No: R0479, Year of Mfg: 2001. Hydraulic Test Pressure: 620 PSIG. Max Design Working Pressure: 406 PSIG. Geometric Swept Volume @ 3550 RPM: 739 CFM. Max Input ...more

500 Ton, Carrier #23XRV5556NRAA50-S, Water-Cooled Chiller, R-134a, Oil-free centrifugal compressor, 2012

C3 Surplus LLC | Miami, FL
Category: Chillers
Seller: C3 Surplus LLC
Location: Miami, FL
Mfr: Carrier
Model: 23XRV5556NRAA50-S
Year: 2012
Overview, For sale is a Carrier 23XRV Series Water-Cooled Centrifugal Liquid Chiller, model 23XRV5568NRAA50-8, featuring oil-free magnetic bearing technology for ultra-efficient performance. This unit was manufactured in 2012 and is ideal for large commercial or industrial HVAC applications., Key, - Model: ...more

300 gallon Schold, Dual Shaft Vacuum Mixer, Stainless Steel

Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Schold
Used 300 Gallon Schold dual shaft vacuum mixer, stainless steel construction, vacuum cover, high speed disperser driven by 50 motor, slow speed anchor agitator with bottom and sidewall scrappers, driven by 20/10 hp motor, (1) 300 gallon stainless steel jacketed mixing can, approximately 55.5" diameter x 39" deep, air ...more

Ford #F-750, Box Truck, 6.7L Power Stroke Diesel, Air Brakes, 2016

Revelation Machinery | Chicago, IL
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Ford
Model: F-750
Year: 2016
Make: Ford, Model: F750, Year: 2016, Machine Location: New York, Built for delivery, moving, route service, and commercial fleet work, this 2016 Ford F-750 Box Truck combines medium-duty capability, proven Power Stroke diesel performance, and the durability buyers want in a straight truck platform., Spec Sheet:, Make: ...more

AKS, CNC Plasma, w/Dust Collector, 6' x 12' Table, 1.5" Pierce Production, 2" Edge Start, 15 HP Compressor, 2008

Revelation Machinery | Chicago, IL
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Aks
Year: 2008
Make: AKS, Model: AKS, Year: 2008, Machine Location: New York, Table Size: 6’x12′, Pierce Production: 1.5″, Edge Start: 2″, Micro Edge Controller, Donaldson Torit DF8 Dust Collector, 15 HP Quincy Compressor, Rare Spare Computer, Brand New HPR 260 XD Upgrade Kit ($15,000), Spare Heads and ...more

75 cfm, 300 psi, Copeland #6DP3A3500TSE211, refrigeration duty compressor, 35 HP

Lenmark Industries | Langley, BC
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Copeland
Model: 6DP3A3500TSE211
SKU: 129838, Model: 6DP3A3500TSE211, Condition: Used, S/N: CCK0414581, Horsepower: 35 hp, CFM: 75.5 cfm, Max. Pressure: 300 psi, Electrical :, Voltage: 575 volts, Phase: 3-phase, Made In: CANADA, Dimensions: 21.00 (H) x 25.00 (W) x 31.00 (L) inches, Additional :, Rated Load Amps: 42.5 amps, Locked Rotor Amps: 230 ...more

Cam-Wood #G1, Longitudinal Veneer Splicer, .059" thick, 13-3/4" min. L, 1.57" min. width, 212 - 428 deg.F, 47.2" heating zone, 2026, new

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: G1
Year: 2026
CAM-WOOD 'VENEER PLUS G1' Longitudinal Veneer Splicer with integral glue applicator. -- : Feed thru splicer with integrated glue applicator. With cooling system to increase glue life. Joins veneer edges passing through a UREA or PVAC "disc style" glue application zone at high speed for an immediate tight joint ...more

460 HP Mack #E7-ASET, remanufactured standard long block engine

Big Bear Engine Company | Parker, CO
Category: Diesel Engines
Seller: Big Bear Engine Company
Location: Parker, CO
Mfr: Mack
Model: E7 ASET
Year: 2023
We offer a variety of both, over the road truck and industrial replacement engines for the Mack E7. Our remanufactured Mack E7 engines (Mechanical, ASET, ETech) come as a 3/4 long block and are not running trim condition. Our remanufacturing process strips the core down to the bare block whereas the camshaft ...more

8' x 17' Kennedy Van Saun ball mills, 400 HP, gear box 6.95 ratio, air clutch, rubber liner, (3 available)

D'Angelo International | Bellingham, WA
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Kennedy
-3 Available, -Siemens 400 HP 4,000 Volt Motor, -With Falk Gear Box 6.95 Ratio, -Eaton Air Clutch, -Low & High pressure Bearing Lube system, -Rubber Liners, -Plates and guards, -Single Helical Main Gears and Pinion Gears, -Grinding Media Available Upon Request.

8550 cfm Reverse pulse jet dust collector, 960 sq.ft., 8" WC, 80 psi compressed air

EcReCon Inc. | Pedericktown, NJ
Category: Dust Collectors
Seller: EcReCon Inc.
Location: Pedericktown, NJ
Mfr: Filter Concept
, 960 Sq.Ft Reverse Pulse Jet dust collector (Filter Receiver). Aluminum. Rated 8550 CFM @ 8" WC. Max design Vacuume 30". Compressed air 80 PSI. (120) Cages.,. FTFR 108-60, FT2. 960 ft, Type. Pulse Jet, Material. Aluminum, FT2. 960.

200 HP @ 720 RPM, Lufkin #T540H, gearbox redcuer, 54.50 :1 ratio, 1.5 service factor

Soberay & Sons Ltd | Cleveland, OH
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Lufkin
Model: T540H
Item 8261 - One (1) Used Lufkin T540 H Gearbox Reducer, 200 HP service rating, 54.5:1 reduction ratio, 1.5 SF service factor, 300 HP catalog rating, model T540H, 720 RPM input speed.

Cefla #Rotostain-RT-2000, spray system, 2005

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Model: CEFLA #ROTOSTAIN-RT-2000
Year: 2005
CEFLA "ROTOSTAIN RT 2000 10 + 10 Rotary Stain Machine with: -- 20 Guns; utilized for automatic application of stain material on workpieces; the "Roto-Stain ROT 10 + 10" represents a new generation Spray Machine from CEFLA, the leader in CEFLA "ROTOSTAIN RT 2000 10 + 10 Rotary Stain Machine with: -- 20 Guns; utilized ...more

Microvu #500HP, comparator, 117 Volts, 3 Amps, 50-60 CPS, S/N 24740

Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Microvu
Model: 500HP
Motor 117 Volts, 3 Amps, 50-60 CPS.

Matsui #MJ3-25-U, 23 cfm dryer w/ hopper, 176°F-320°F, 2011

Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Matsui
Model: MJ3-25-U
Year: 2011
Used 23 CFM Matsui MJ3-25-U Dryer, W/ Hopper 460/3/60, 13A 2.1 kW Process Heater 2.49 kW Regen Heater Dew Point: -40C (86°F, 75% RH) Temp. Range: 176°F – 320°F 1.4 Cu/Ft (55 LBS) Drying Hopper Capacity Control Circuit: 100V 70 PSI Compressed Air Primary Conveying Distance: 30 FT Secondary Conveying ...more

100 HP Vilter 448, 8-Cylinder Reciprocating Compressor Package, Belt Driven, 108-220/440 V, 1200 RPM, 309 CFM

Genemco | Hearne, TX
Seller: Genemco
Location: Hearne, TX
Mfr: Vilter
Model: 448
Vilter 448 8-Cylinder Reciprocating Compressor - Model: AK448R, Serial No: H57137-2, Mfg Year: 2004, Number of Cylinder: 8. Maximum RPM: 1200, Bore & Stroke-In (mm): 114x89, Displacement M3hr: 309, Suction Connection(in): 4. Dis Connection(in): 3, Oil Charge Gallon (Liter): 7(27), Maximum Discharge Temp C: ...more

Bodor #P3, Dual Pallet Fiber Laser, 10' x 5' working area, 6 KW, BodorPower laser w/ autofocus, 2023

Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lasers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Bodor
Model: P3
Year: 2023
Bodor P3 Series Dual Pallet Fiber Laser Cutting Machine (subject to buyer verification):Model: P3Working Area: 10’ x 5’Laser Power: 6000WPositioning Accuracy: ±0.05mm/mRepositioning Accuracy: ±0.03mmMax. linkage speed: 200m/minMax. Acceleration: 4.0GTable Load Bearing: ...more

30" width x 30" D x 30" H Russells #RB-16-25, temperature chamber, -24° to 177°, water-cooled, Watlow 981 programmable controller, 460 V., 3 phase

LR Environmental Equip Co | Los Angeles, CA
Seller: LR Environmental Equip Co
Location: Los Angeles, CA
Mfr: Russells
Model: RB-16-25
Russells Temperature Chamber Model RB-16-25, Internal Chamber Dimensions: 30-x30-x30-, Temperature Range: -24C to +177C (1 x 20HP Water Cooled Compressor), New Watlow Model 981 Programmable Controller Installed, Over and Under Temperature Protection Controller, Stainless Steel Interior; 6- Diameter FeedThrough port in ...more

200 HP FES #16SE, rotary screw compressor, 350 psig, R717, 230/460 V., 3565 RPM, Fr.444TSC

Genemco | Hearne, TX
Seller: Genemco
Location: Hearne, TX
Mfr: Fes
Model: 16SE
FES Rotary Screw Compressor Package. Model: 16SE. Serial No: 165211MS. Test Pressure(PSIG): MDWP: 350 PSIG, HYD: 470. Refrigerant: R-717. Ram Electric Motor: HP: 200, Volt: 230/460, Hz: 60, RPM: 3565, Frame: 444TSC. FES Oil Separator: National No: 9920, MAWP: 300 PSI @ 400 F. MDMT: -20 F @ 300 PSI.

92 cfm, Multiquip, compressed air, 630 hours, S/N: 9510057-L035655, 2022

Wheeler Machinery | Salt Lake City, UT
Seller: Wheeler Machinery
Location: Salt Lake City, UT
Mfr: Multiquip
Year: 2022
92 CFM AIRCOMPRESSOR, PRICED 12/29/25 KP.

92 cfm, Multiquip, compressed air, 394 hours, S/N: 9510037-L035660, 2022

Wheeler Machinery | Salt Lake City, UT
Seller: Wheeler Machinery
Location: Salt Lake City, UT
Mfr: Multiquip
Year: 2022
92 CFM AIRCOMPRESSOR, PRICED 12/29/25 KP.

92 cfm, Multiquip, compressed air, 176 hours, S/N: 9510066-L035663, 2022

Wheeler Machinery | Salt Lake City, UT
Seller: Wheeler Machinery
Location: Salt Lake City, UT
Mfr: Multiquip
Year: 2022
92 CFM AIRCOMPRESSOR, PRICED 12/29/25 KP.

Koolant Koolers #KV-2000, chiller, R-22 refridgerant, digital temp. Control

D & D Industries Inc | Monclova, OH
Category: Chillers
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Koolant Koolers
Model: KV-2000
2HP COMPRESSOR,.75 HP PUMP, R-22 REFRIDGERANT 6 LBS, DIGITAL TEMPERATURE CONTROL, 60F - 80F DESIRED OPERATING TEMPERATURE, 460 V, 46" X 29" X 34" TALL, 500 LBS APPROX. WEIGHT.

52" Timesavers #2331-45-066, Segmented Widebelt/Polisher, 3-Head, 5" thick, 15-45 FPM, 5830 CFM, unused

RT Machine | Hughesville, PA
Seller: RT Machine
Location: Hughesville, PA
Mfr: Timesavers
Model: 2331-45-066
Timesavers Model 2331-45-066 Three Head 52" Segmented Widebelt/Polisher : Abrasive belt size: 52" x 103" Main motor first head: 30Hp Main motor second and third heads: 25HP Maximum width stock: 51" Minimum part size: 6 x 6" with Vacuum Maximum thickness opening: 5" Infeed loading area: 14" Feed speed: 15-45 FPM ...more

200 HP @ 1750 RPM, Philadelphia, parallel shaft gearbox reducer, 35.00 :1 reduction ratio

Soberay & Sons Ltd | Cleveland, OH
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Philadelphia
One (1) Used Philadelphia Gearbox Reducer, 200 HP service rating, 35:1 reduction ratio, 1.5 SF service factor, 300 HP catalog rating, 1750 RPM input speed.

Complete Gold and Silver CIL Process and Recovery Concentrator Plant

Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Complete Gold and Silver CIL process and recovery concentrator plant, includes feed and crushing circuit, ANI FLSmidth SAG and Ball Mill circuit, precious metal recovery via carbon in leach process and electrowinning. The final product from the plant was dor which was shipped off-site to a refinery. Offered with ...more

Sullair #7509B, compressed air, S/N: 201712050030, 2018

Madisa - Heavy Machinery | Santa Catarina,
Seller: Madisa - Heavy Machinery
Location: Santa Catarina,
Mfr: Sullair
Model: 7509B
Year: 2018

Atlas-Copco #XAS188, compressed air, S/N: UVC201941, 2022

Empire Power Systems | Phoenix, AZ
Seller: Empire Power Systems
Location: Henderson, NV
Model: XAS188
Year: 2022
Brand new 2024 models. 10+ available! In stock ready to ship Call/Text Brett Lambeth 702:803:4881, HIGHWAY TOWABLE, PINTAL HITCH, TRAILER MOUNTED.

200 HP Howden WRVI255, Rotary Screw Compressor Package, 3600 RPM, 350 psig

Genemco | Hearne, TX
Seller: Genemco
Location: Hearne, TX
Mfr: Howden
Model: WRVI255
Howden Rotary Screw Compressor Package. The Bare Screw Compressor has been rebuilt by SCS in San Antonio, Tx November 2019. SCS Project No: 928. Model: WRVI255. Serial No: MK6AWRVI255145256. Howden Bare Screw: Serial No: MK6A/WRVI255145/256, Contract No: J07150 VR25306-1MNN, Hydraulic Test Pressure: 42.00 Bar (609 ...more

Cam-Wood #GLUEMATE-700, veneer glue applicator, double side, infeed roller, w/ warranty, 2026

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: GLUEMATE-700
Year: 2026
CAM-WOOD/INNOVATOR GLUEMATE 700 Double Sided (Edges) Veneer Glue Applicator. Ensures precise application of adhesive to both edges of veneer bundles avoiding airborne contaminants and operation inconvenience. Works with both Urea based or PVAc glue. Consists of a rigid welded steel body and two glue-pots for precise ...more

Surgical mask converting machine, Bluewrist #BW-MD-0001, 4-ply, forming, sealing & welding 3 or 4 layer disposable face masks

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Bluewrist
Model: SURGICAL MASK CONVERTING MACHINE
Bluewrist 4 Ply Surgical Mask Converting Line, Capable of forming, sealing and welding 3 or 4 layer disposable face masks, Appx. 50-70 masks / minute, Mask size: Standard Adult Mast: 17.5 cm x 9.5cm (6.9" x 3.7"), Modular design that can be expanded for higher throughput, Very well supported machine. Runs on 220v ...more

500 HP @ 1160 RPM, Lufkin #S1810CH, Gearbox, 6.22 :1 Ratio, 1.7 service factor

Power Zone Equipment | Center, CO
Seller: Power Zone Equipment
Location: Center, CO
Mfr: Lufkin
Model: S1810CH
Brand/Model: Lufkin S1810CH : Used Lufkin S1810CH gearbox with following s: • 500 HP Service Rating • 851 HP Catalogue Rating • 6.229:1 Ratio • 1160 Input Speed • 186 Output Speed • 1.7 Service Factor • Weight: 31,660 lbs (complete package on skid) • Dims: 45"(L)x ...more

Sullivan #D1600PHCA4, compressed air, 4619 hours, S/N: 510994, 2018

Thompson Tractor - Greg | Tuscaloosa, AL
Seller: Thompson Tractor - Greg
Location: Tuscaloosa, AL
Model: D1600PHCA4
Year: 2018

15 HP Hycomp #2AN10C-B21-ALMV9-20/15D, Boost Compressor, Nitrogen/Air/Gas Pressure Booster, 1760 RPM, 35.1/17.6 amps, 230/460 V.

TNT Industrial | Orange, CA
Seller: TNT Industrial
Location: Orange, CA
Model: 2AN10C-B21-ALMV9-20/15D
HyComp 20hp booster compressor model 2AN10C-B21-ALMV9-20/15T (Quicy Odyssey) HyComp is owned by Quincy and the for this can be found on their site. It takes low pressure inert gas or air and boosts it for high pressure required for laser cutting or other similar applications..

6" x .08" Durant #AF-5C, air feeder, 100 SPM, 2019

D & D Industries Inc | Monclova, OH
Category: Air Feeders
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Durant
Year: 2019
ORDER 6, 6" MAX WIDTH, 6" MAX FEED LENGHT,.080" MAX THICKNESS, MAX AIR PRESSURE 2.2 (KG/CM2), MAX SPM 100, FIXING FRICTION KG 78, MOVING FRICTION KG 144.5, LOADING FORCE KG 41, 2019, 20" X 10" X 3" T APROX., 40 LBS APROX..

6" x .08" Durant #AF-5C, air feeder, 100 SPM, 2019

D & D Industries Inc | Monclova, OH
Category: Air Feeders
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Durant
Year: 2019
ORDER 6, 6" MAX WIDTH, 6" MAX FEED LENGTH,.080" MAX THICKNESS MAX AIR PRESSURE 2.2 (KG/CM2) MAX SPM 100 FIXING FRICTION KG 78 MOVING FRICTION KG 144.5 LOADING FORCE KG 41 2019 20" X 10" X 3" T APROX. 40 LBS APROX..

109 HP @ 1800 RPM, Cummins #G-495, Engine on an IR Gas Compressor, Inline 4-cylinder, 1985

Power Zone Equipment | Center, CO
Seller: Power Zone Equipment
Location: Center, CO
Mfr: Cummins
Model: G-495
Year: 1985
Brand/Model: Cummins G-495 : Used inline 4 cylinder engine on an IR gas compressor skid stock #54055 has hole in the block, good engine for parts, 109hp @ 1800rpm, 8.5:1 comp ratio, mfg 7/85 HP: 109 RPM: 1800.

92 cfm, Multiquip, compressed air, 330 hours, S/N: 9510065-L035657, 2022

Wheeler Machinery | Salt Lake City, UT
Seller: Wheeler Machinery
Location: Salt Lake City, UT
Mfr: Multiquip
Year: 2022
92 CFM AIRCOMPRESSOR, PRICED 12/29/25 KP.

92 cfm, Multiquip, compressed air, 438 hours, S/N: 9510046-L035654, 2022

Wheeler Machinery | Salt Lake City, UT
Seller: Wheeler Machinery
Location: Salt Lake City, UT
Mfr: Multiquip
Year: 2022
92 CFM AIRCOMPRESSOR, PRICED 12/29/25 KP.

92 cfm, Multiquip, compressed air, 276 hours, S/N: 9510063-L035656, 2022

Wheeler Machinery | Salt Lake City, UT
Seller: Wheeler Machinery
Location: Salt Lake City, UT
Mfr: Multiquip
Year: 2022
92 CFM AIRCOMPRESSOR, PRICED 12/29/25 KP.

92 cfm, Multiquip, compressed air, 176 hours, S/N: 9510036-L035659, 2022

Wheeler Machinery | Salt Lake City, UT
Seller: Wheeler Machinery
Location: Salt Lake City, UT
Mfr: Multiquip
Year: 2022
92 CFM AIRCOMPRESSOR, PRICED 12/29/25 KP.

2,000 cfm Donaldson Torit #TG-4, cartridge dust collector, 7.5 HP, 208 V., 3 Ph.

Wheeler Machinery Sales | Pomona, CA
Category: Dust Collectors
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Donaldson Torit
Model: TG-4
DONALDSON TORIT TG-4 Cartridge Dust Collector #8211, Airflow Range: 2,000 CFM (Nominal rating is often 2,000 at 10 wg), Filter Media: (4) PowerCore Ultra-Web FR (Fire Retardant) filter packs, providing up to 588 sq. ft. of media, Motor & Fan: Standard 7.5 HP TEFC motor, often paired with an integrated fan pack and ...more

110 cfm, Atlas Copco, compressed air, 8326 hours, S/N: APP482126, 2018

Wheeler Machinery | Salt Lake City, UT
Seller: Wheeler Machinery
Location: Lindon, UT
Mfr: Atlas Copco
Year: 2018

Sullair TSR32, Compressed Air, 27589 hours, S/N: 200809270062, 2008

Thompson Tractor - Greg | Tuscaloosa, AL
Seller: Thompson Tractor - Greg
Location: Tuscaloosa, AL
Mfr: Sullair
Model: TSR32
Year: 2008