Buy or Sell Your Vertical Lathe

SERIAL. 4A6 V5LE1, MODEL. 640 20 V, AREA OF TABLE. 104" X 20", SPINDLE SPEEDS. (24) 14 TO 1400 RPM, LONGITUDINAL & CROSS FEEDS. (32) 1/4 TO 60 IPM, VERTICAL HEAD FEEDS. (32) 1/16 TO 15 IPM, LONGITUDINAL TRAVEL. 60", CROSS TRAVEL. 18", VERTICAL KNEE TRAVEL. 16", VERTICAL HEAD TRAVEL. 8", TOP OF TABLE TO FACE OF ...more

A special purpose large lathe with two sets of headstock and tool post was designed exclusively to turn turbine discs. After finish turning one side of the disc using one headstock, the other headstock approaches, chucks and moves to its home position to turn the other side of the disc, where time consuming rechucking ...more

Available for sale, this RJV separator (CRN: H3897.2) is designed for sweet service with a maximum pressure of 720 PSI. Manufactured in 1997, it s a vertical orientation and is portable. The unit has a diameter of 16 inches and an overall length of 5 feet. Currently located in Slave Lake, AB, Canada, this unit is ...more

SERIAL. 1 3004-964-28, MODEL. FYA41M, AREA OF TABLE. 78" X 15-3/4", SPINDLE SPEEDS. (21) 28 TO 1300 RPM, LONGITUDINAL FEEDS. (32) 1/2 TO 42 IPM, CROSS FEEDS. (32) 3/8 TO 31-5/8 IPM, VERTICAL KNEE FEEDS. (32) 1/4 TO 20 IPM, VERTICAL RAM FEEDS. (16) 1/4 TO 80 IPM, LONGITUDINAL TRAVEL. 41-3/4", CROSS TRAVEL. 14-3/16" ...more

Capacity  Chuck Size: 6”Max. Turning Length: 7.9”Max. Turning Diameter: 6”Travels  Cross Travel (X-Axis): 27.5Longitudinal Travel ( Z-Axis): 11.8”Traverse (Y-Axis): 7.9”Rapid Feed: 50 m/minMain Spindle  Spindle Nose (Flat Ø): 140Speed Range: 50-7000 RPMFull Power Speed ...more

KEARNEY & TRECKER PLAIN VERTICAL MILL, MODEL: 2CSM, S/N: #25-7105, LONGITUDINAL TRAVEL: 28", CROSS TRAVEL:12", VERTICAL KNEE TRAVEL: 14", VERTICAL HEAD TRAVEL: 4", SPINDLE YO TABLE: 0 TO 19", SPINDLE SPEEDS: (16) 50 - 1250 RPM, SPINDLE TAPER: #50, SPINDLE MOTOR: 20 HP, LONG & CROSS FEED RATES: (32) 3/8 - 90 ...more

Machining diameter 78.7", Table diameter 63", Maximum machining height (w/ tool) 45.3", Maximum distance under rail 53.1", Maximum workpiece weight on APC 11,000 LBS, Maximum ram travel (Z-Axis) 41.34", Horizontal travel (X Axis) -4.0 / 61.75, Ram size 8.3" x 8.3", Cross rail travel (4 steps) 39.37, Number of tools in ...more

Working AreaWorkpiece length (max.) 17 in Center height 8 in Turning diameter over bed 16 in Turning diameter over support 10 in TravelsTravel X-axis 7.9 in Travel Z-axis 18 in HeadstockLathe chuck diameter 10 in Speed range 50 - 2,000 rpm Spindle mount A2-8 Spindle bore 3 in Spindle bore with draw tube 3 in Rapid ...more

Dimensions8'5" X 9'6" X 9'10" HIGH Weight23500 pounds, SERIAL. 9J41V5R-6 MODEL. 430 AREA OF TABLE. 80" X 18" SPINDLE SPEEDS. (24) 16 TO 1600 RPM LONGITUDINAL & CROSS FEEDS. (32) 3/8 TO 90 IPM VERTICAL FEEDS. (32) 3/16 TO 45 IPM LONGITUDINAL TABLE TRAVEL. 42" CROSS TABLE TRAVEL. 16" VERTICAL HEAD ...more

DOALL TF-14 VERTICAL TILT FRAME BAND SAW, MANUFACTURER - DOALL, MODEL - TF-14, MACHINE NUMBER - 337-76153, TYPE - VERTICAL TILT FRAME BAND SAW, CUTTING CAPACITY - UP TO 14" FOR SQUARES AND ROUNDS, VERTICAL CAPACITY - UP TO 21", VOLTAGE - 220, PHASE - 3, HERTZ - 60, AMPS - 10.6, BAND LENGTH - 158 TO 160.

51.2” X 11” Knee Mill with Variable Speed, Spindle and Turret Head, Horizontal Arbor Supports with Arbor, Coolant System, One Shot Lubrication and Bijur #UBA2 Spray Mist Coolant Unit, Table Working Size: 51.2" X 11", Table Travel Longitudinal: 39.4", Cross: 14.2", Vertical: 17.7", Table Feeds Number: ...more

Maker: Blanchard, Model: 22K-42, Serial Number: 12731, 42" Diameter Chuck, 40 HP Motor, 24" Vertical Travel, 48" Swing, Neutrifier Magnetic Chuck Controls, Coolant Pump.

Spec Sheet:, Aloris CXA 1 Lathe Tool Post Holder w/ Tungaloy Blade Holder & Blade, USED, Brand: Aloris, Part Number: CXA 1, Tool Holder, Wedge: 2-1/4, Lathe Swing (Inch) 13 to 18, Through Coolant No, Overall Height (Inch) 2-1/8, Overall Length (Inch) 3-1/2, Maximum Cutting Tool Size (Inch) 3/4, Centerline Height ...more

8" TALL CHUCK JAWS SET OF FOUR (4), WEBSTER & BENNETT, 3 STEP, WILL FIT 36" VTL'S, MODEL. T39.40/1, QUANTITY. 4, JAW HEIGHT (G). 8", JAW WIDTH (X). 2 1/4", STEP 1 HEIGHT (F). 3", STEP 2 HEIGHT (F1). 2 1/2", STEP 3 HEIGHT (F2). 2 1/2", OVERALL LENGTH (D). 7 3/4", 3 STEP JAWS, EXCELLENT SERRATIONS / POSSIBLEY ...more

Model number VB-1820XL, Year of manufacture 1996, Horizontal capacity 18", Vertical capacity 20", Vertical capacity @ 45 degrees 12-1/2", Blade speed--number Inf. variable, Blade speed--range 50 to 450 SFPM, Working surface 33" x 24", Hydraulic tilt--left 45 deg, --right 45 deg, Main motor 3 HP, Blade length (L x W x ...more

51.2” X 11” Horizontal and Vertical Milling Machine with Pendant Control, Horizontal Arbor Supports with Arbor, Coolant System and One Shot Lubrication, Table Working Size: 51.2" X 11", Table Travel Longitudinal: 39.4", Cross: 14.2", Vertical: 17.7", Table Feeds Number:, Longitudinal & Cross:.6 To 27.5 ...more

SERIAL. 8706348, MODEL. 3M, NEW IN. 1970, TABLE AREA (T-SLOTTED). 63" X 14", LONGITUDINAL TABLE TRAVEL. 33-7/8", CROSS TABLE TRAVEL. 14", VERTICAL TABLE TRAVEL. 19-11/16", SPINDLE TAPER. #50 NS, SPINDLE SPEEDS. (16) 25 TO 1500 RPM, LONGITUDINAL & CROSS TABLE FEEDS. (16) 21/32 TO 85 IPM, VERTICAL TABLE FEEDS. (16) ...more

MARVEL TILT FRAME VERTICAL BAND SAW, MODEL: Series 8 Mark II, SERIAL NUMBER: 827810, *To Be Reconditioned December 2025, **Photo is representative of what saw will look like when reconditioning is complete., High Column, Tilting Column For Straight and Miter Cutting, Horizontal Capacity: 18", Vertical Capacity: 28" ...more

(1) Used double scraper sweep blades with shaft. Shaft is approximately 5" diameter X 105" long. With (2) 80" long vertical blades. No motor., _UNKNOWN_ DOUBLE SCRAPER.

10"5131"16"5"15"4060 - 4500 RPM5 HP575V/3/6070" X 66" X 94" Tall3,250 LBS.

Available for sale: A Spectrum Process Systems gas exchanger (Model: BEM) with dimensions of 267 mm x 3448 mm and serial number 14-0943. This unit is designed for sweet service, has a maximum temperature of 150°F and a maximum pressure of 265 psi. Built in 2014, it s a vertical orientation, is portable, and is ...more

Doall Vertical Band Saw, Model: V - 36, -36" Throat, -30.5" x 30" Tilting Table, -Blade Welder, -12" Vertical Clearance, -50 - 160 R.P.M., -Work Light, -Approximate Dimensions: 72" LR x 55" FB x 82" Tall, -Approximate Weight: 2,000 LB, -Removed and in Storage: Toledo, Ohio.

Size 5" Make GIDDINGS & LEWIS Year N/A, ONE USED- G&L Tailstock, "H" Series machine, 84" Vertical Travel..

MARVEL TILT FRAME VERTICAL BAND SAW, MODEL: Series 8 Mark II, SERIAL NUMBER: 827795*, *Reconditioned October 2025, Tilting Column For Straight and Miter Cutting, Horizontal Capacity: 18", Vertical Capacity: 22", Vertical Capacity at 45 Degrees: 12-3/4", Blade Size: 14'6" x 1" x.035", Blade Speed Range: 50 to 450 ...more

Make: Dalmec, Model: PEC, Year: 2024, Machine Location: Upon Request, 400 lb Capacity, Max working radius: 4000 mm, Max vertical lifting speed: 0,5 meters/second, Vertical lift: 2450 mm.

MODEL: V - 36, 36" THROAT, 30-1/2" x 30" TILTING TABLE, BLADE WELDER, 12" VERTICAL CLEARANCE, 50 - 160 R.P.M., WORK LIGHT, APPROXIMATE DIMENSIONS: 6' LR x 55" FB x 82" TALL, APPROXIMATE WEIGHT: 2,000 LB, GOOD CONDITION.