Buy or Sell Your Vertical Lathe
Recommended Categories for vertical lathe
AI-ranked results for vertical lathe - closest matches first
6' x 6' Preston-Eastin #MA66MD, welding manipulator, hand pendant controller
Mitrowski Welding Equipment | South Houston, TX
Category: Welding Manipulators
Seller: Mitrowski Welding Equipment
Location: South Houston, TX
Mfr: Preston-Eastin
Used Preston Eastin 6x6 Welding Manipulator, Model: MA66MD, Free Standing X-Base (Swivel), Hand Pendant Controller, 90 Day Warranty, 6ft Vertical Travel 6ft Variable Speed Horizontal Travel 300lb End Boom Capacity 120 Volt Input, Optional In Stock Equipment/Accessories! New or Used Subarc Welding Packages Cross ...more
17" x 60" Acer #Dynamic-1760G, gap bed engine lathe, 9-5/8" swing over cross slide, inch/metric, 3-jaw 10" chuck, 7.5 HP, 2001
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Acer
Model: DYNAMIC-1760G
Year: 2001
SERIAL. N1010050, MODEL. DYNAMIC 1760G, YEAR NEW. 2001, SWING OVER WAYS. 17", SWING IN GAP. 26", SWING OVER CROSS SLIDE. 9-5/8", DISTANCE BETWEEN CENTER. 60", SPINDLE SPEEDS. (12) 50 TO 1800 RPM, THREADS (ENGLISH). (36) 4 TO 56 TPI, THREADS (METRIC). (22) 0.5 TO 7 MMPI, FEEDS (ENGLISH).002 TO 0.028 IPR, FEEDS ...more
Acer #5VS-EVS-VSII E-mill vertical milling machine, 9" x49"table, 3 HP, 2-Axis AcuRite digital read out, 2012
Equipment Trading Co Inc | Wixom, MI
Seller: Equipment Trading Co Inc
Location: Wixom, MI
Mfr: Acer
Model: 5VS-EVS-VSII
Year: 2012
STOCK NUMBER: ET-5651, (1) used ACER E-Mill Vertical Milling Machine, MODEL: 5VS-EVS-VSII, SERIAL NUMBER: 1112020056 NEW: 2012, Table Size: 9″ x 49″, Longitudinal Travel: 34″, Cross Travel: 12″, Vertical Travel Of Knee: 16″, Spindle Speeds, Infinitely Variable: 60 – 4500 RPM ...more
32" x 205" Tos, 3.25" bore, engine lathe, 7.1-900 RPM, steady rests, #68439
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Tos
Model: 32 X 205
SWING OVER WAYS. 32", SWING OVER CROSS SLIDE. 22", DISTANCE BETWEEN CENTERS. 205", SPINDLE SPEEDS. 7.1 TO 900 RPM, FEEDS.0022 TO.0591 TPI, THREADING. 1/8 TO 56 TPI, THREADING, METRIC.5 TO 1122 MM, SPINDLE BORE. 3.25", STEADY RESTS. YES, COOLANT WITH PANS. YES.
160 gallon Perry Products, Stainless Steel vertical vessel, dish top & bottom, 2002
Perry Videx LLC | Hainesport, NJ
Category: Stainless Steel Tanks and Vessels
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Perry
Year: 2002
Used Approximately 160 Gallon Stainless Steel Vertical Vessel, Manufacturer: Perry Products Corp., Capacity: 160 gallons, Model: VRX-160, National board: 6376, Serial: B-6325, Year: 2002, Internal full vacuum @ 450F, Dish top, dish bottom, Mounted on short legs, 2002 PERRY PRODUCTS VRX-160, Capacity. 160 gal, Type of ...more
24" Sour Vertical Inlet Separator, 1480 psi, 3-phase, 2007
IronHub | Calgary, AB
Category: Vertical Separators
Seller: IronHub
Location: Grande Prairie, AB
Year: 2007
Available in Grande Prairie, AB, Canada, this vertical sour inlet separator from C & T Equipment (Model U0845.2) s a diameter of 24 inches and a length of 90 inches. Built in 2007, it operates under a maximum pressure of 1480 psi and a maximum temperature of 100°F. The unit is portable and designed for ...more
Cincinnati #330-18, Vertical Mill, 18" x 72" Table, 34" Longitudinal, 16" Cross, (24) 16-1600 RPM, 30 HP, 230/460 V
Norman Machine Tool Ltd | Baltimore, MD
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Cincinnati
Model: 330-18
Cincinnati ‘VerciPower’ 18″ x 72″ Vertical Mill, 330-18, Inventory # 9840-C, Model: 330-18, S/N: 311031 V5W-3 – Rebuilt in 2000 by American Machine Tool Repair & Rebuilding Co. in Randolph, NJ, Table Size: 18″ x 72″ with (3) 13/16″ T-Slots on 3 1/4″ Centers ...more
60" x 7" Cincinnati, rafted slitter head, quick disconnect drive, hydraulic vertical adj., #69155
Yoder Machinery Sales | Holland, OH
Category: Slitters
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cincinnati
SLITTING ARBORS. 7" DIAMETER, DISTANCE BETWEEN HOUSINGS. 64" MAXIMUM, RAFTED DESIGN. YES, DRIVE. QUICK DISCONNECT, OUTBOARD. GUIDED HYDRAULIC REMOVAL, VERTICAL ADJUSTMENT. HYDRAULIC, KEYWAY. 1", MOTOR. 15 HP.
Blanchard #26HD-48, rotary surface grinder, 56" swing, 48" chuck, 23" vertical Range, 75 HP, 576/560 RPM, 1979
GCH Machinery | Warren, MI
Seller: GCH Machinery
Location: Warren, MI
Mfr: Blanchard
Model: 26HD-48
Year: 1979
26HD-48 Blanchard, 48" Magnetic Chuck, 23" Vertical, 56" Swing Inside Guards, 3000 LB Work Load, As Is., 26HD-48 BLANCHARD ROTARY SURFACE GRINDER, S/N B30-8-336, STANDARD, Magnetic chuck diameter………………………………………. ...more
30 gallon Stainless Steel Tank, Vertical, 20" diameter x 24" Straight Side, Dish Top and Bottom
Perry Videx LLC | Hainesport, NJ
Category: Stainless Steel Tanks and Vessels
Seller: Perry Videx LLC
Location: Hainesport, NJ
Used Approximately 30 Gallon Stainless Steel Tank, Capacity: 30 gallons, Dimensions: 20: dia. x 24" straight side, Dish top, dish bottom, Mounted on stand, _UNKNOWN_ 30 GALLON, Capacity. 30 gal, Diameter. 1.67', Height. 2', Type of stainless. Stainless Steel, Type Of Heads. Dish, Vertical/Horizontal. Vertical ...more
10" Bison, 3-jaw lathe chuck, D1-6 Mount
Machinery Central | Louisville, KY
Category: Lathe Chucks
Seller: Machinery Central
Location: Louisville, KY
Mfr: Bison
, Bison 10" 3 Jaw Lathe Chuck w/ D1-6 Mount, Spec Sheet:, Bison 10" 3 Jaw Lathe Chuck w/ D1-6 Mount, Has a chipped gear/pinion tooth. Still Works.
Blanchard #26HCD-48, rotary surface grinder, 56" swing, 48" chuck, 35" vertical Range, 75 HP, 576/560 RPM, 1980
GCH Machinery | Warren, MI
Seller: GCH Machinery
Location: Warren, MI
Mfr: Blanchard
Model: 26HCD-48
Year: 1980
Blanchard 26HCD-48 Vertical Rotary Surface Grinder, 48" Magnetic Chuck, 18" Vertical, 75 HP Geared Head, 26HCD-48 BLANCHARD ROTARY SURFACE GRINDER, S/N 15101 Year: 1980, STANDARD, Magnetic chuck ...more
10 Stand, Yoder #M1-1/2, rollformer, 1.5" arbor, 8" roll space, 11" horizontal centers, 4"-7" vertical adj.
Yoder Brothers Machinery | Toledo, OH
Category: Rollformers
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Yoder
Model: M1-1/2
SERIAL. 7329, STANDS. 10, MODEL. M1-1/2, ARBOR DIAMETER. 1-1/2", ROLL SPACE. 8", HORIZONTAL CENTERS. 11", VERTICAL ADJUSTMENT. 4" TO 7", LOWER SPINDLE TO BASE. 5-3/4".
Blanchard #42HD-84, geared head vertical surface grinder, 84" chuck, 87" swing, #17079
F P Miller Company | Jackson, MI
Seller: F P Miller Company
Location: Jackson, MI
Mfr: Blanchard
Model: 42HD-84
Chuck Dia.: 84 inches Spindle (Horz/Vert): No Attached Power: 200 horsepower Swing: 87 inches Under Wheel: 24 inches Table Speeds: No Attached Grinding Wheel Width: No Attached inches Table Motor Horsepower: No Attached horsepower Grinding Wheel Dia.: 42 inches CNC Control: no Type of CNC Control: No Attached ...more
100 HP 900 RPM General Electric, Frame L445VP16, TEFC BB, 460 Volts, New Surplus
Romanoff Industries Inc | Toledo, OH
Category: Vertical Pump Motors
Seller: Romanoff Industries Inc
Location: Henderson, NV
Mfr: General Electric
Frame: L445VP16
Stock #: 64268 Category: Vertical Motors HP: 100 RPM: 885.00 Frame: L445VP16 Enclosure: TEFCBB Make: Electric Volts: 460 Service Factor: 1.15 Condition: New Surplus Location: Henderson, NV.
6" x 18" Kent #KGS618, Manual Hand Feed Surface Grinder, 19.5" Table Travel, 8.5" Saddle Travel, 8" x 1" x 1.25" Grinding Wheel, 1.5 kW, 3470 RPM, 240 V
Norman Machine Tool Ltd | Baltimore, MD
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Kent
Model: KGS618
Kent 6″ x 18″ Manual Hand Feed Surface Grinder, KGS618, Inventory # 9861, Model: KGS618, S/N: 40010N, Working Capacity: 6″ x 18″, Table Travel: 19 1/2″, Saddle Travel: 8 1/2″, Grinding Wheel Capacity: 8″ x 1″ x 1 1/4″, Spindle Speed: 3,470 RPM, Vertical Graduation: ...more
Wittmann, W673, robot, 1000-3000 Ton, 3 axis, 19.7' trav stroke, 9.9' vertical stroke, 6.6' kick stroke, 480 V., 2006
Arlington Machinery | Lake Zurich, IL
Category: Industrial Robots
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Wittmann
Model: W673
Year: 2006
Used 3 Axis Wittmann Robot Model W673, New In 2006 Traverse Stroke: 6000 mm Vertical Stroke: 3000 mm Kick Stroke: 2000 mm Payload: 220 LBS Voltage: 480V Press Range: 1000-3000 Ton Does Not Include Rigging Or Loading Guarding Show In Photos Is Not Includes.
125 gallon Stainless Steel Vertical Storage Tank, 35" diameter x 35" Straight Side, Open Top, Flat Bottom
Perry Videx LLC | Hainesport, NJ
Category: Stainless Steel Tanks and Vessels
Seller: Perry Videx LLC
Location: Hainesport, NJ
Used Approximately 125 Gallon Stainless Steel Tank, Capacity: 125 gallons, Dimensions: 35" dia. x 35" straight side, Open top, flat bottom, Mounted on wheels, _UNKNOWN_ 125 GALLON, Capacity. 125 gal, Diameter. 2.92', Height. 2.92', Type of stainless. Stainless Steel, Type Of Heads. Flat, Vertical/Horizontal. ...more
JUST ADDED!
Bridgeport #Series-II, vertical mill, 11" x58" tbl., 4 HP, 30" X, 15" Y, 16" Z, 50-3500 RPM, variable speed, Acu-Rite 2-Axis digital read out, Universal 300 Kwik switch spindle & tooling
Machinery Values Inc | Harrison, NJ
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Bridgeport
Model: SERIES-II
BRIDGEPORT VERTICAL MILL MODEL: SERIES II, S/N: 637 :WORKING SURFACE OF TABLE. 11" X 58" RANGE: - LONGITUDINAL.″0" - CROSS. 15" VERTICAL (KNEE). 16" RAM TRAVEL. 16"MAXIMUM THROAT DISTANCE. 26-5/8" MINIMUM THROAT DISTANCE. 10-5/8" MAXIMUM TABLE LOAD CAPACITY. 1,500 LBS. ...more
Clausing, CNC vertical mill, Trak AGE 3 Control, 9" x48" table, 3 HP, power draw bar, one shot lube
Yoder Machinery Sales | Holland, OH
Category: CNC Vertical Bed Mills
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Clausing
SERIAL. 951, MODEL., AREA OF TABLE. 49" X 9", SPINDLE SPEEDS (VARIABLE). 60 TO 4200 RPM, LONGITUDINAL TRAVEL. 36", VERTICAL KNEE TRAVEL. 16", CROSS TRAVEL. 12", QUILL TRAVEL. 5", POWER LONGITUDINAL & CROSS TRAVEL. SERVO, POWER DRAW BAR. YES, RAM TRAVEL. 17-3/4", DEPTH OF THROAT. 6.7" TO 23.8", TAPER IN SPINDLE. ...more
8" x 24" Brown & Sharpe #824-Micro-Master, surface grinder, 13.5" work height, 14" diameter x 1" thick wheel, 5" diameter hole, 10-125 FPM, 1980
GCH Machinery | Warren, MI
Seller: GCH Machinery
Location: Warren, MI
Mfr: Brown & Sharpe
Model: 824-MICRO-MASTER
Year: 1980
824 Brown & Sharpe Micromaster Surface Grinder, Power Up & Down, Coolant Pump & Tank, Table Mounted Wheel Dresser, Attached Electrical Panel, As Is, 824 BROWN & SHARPE MICRO-MASTER SURFACE GRINDER, S/N 523-824-2119 Year: 1980, STANDARD, CAPACITY, Maximum work width and length. 8 x 24, Maximum work ...more
30000 lb. Coil car, hydraulic drive, 29" drum, 60" OD coil, 18" vertical travel, #59728
Yoder Machinery Sales | Holland, OH
Category: Coil Cars
Seller: Yoder Machinery Sales
Location: Holland, OH
CAPACITY. 30,000 LBS, WIDTH OF DRUM. 29", OD COIL. 60", FLOOR TO PLATEN. 26" TO 44", VERTICAL TRAVEL. 18", HYDRAULIC DRIVE. YES, COIL ROTATION. YES.
Siemens, 8PX, 600 Volts, Double-Sided Motor Control Center, 3PH
Lenmark Industries | Langley, BC
Category: Motor Control Centers
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Siemens
Model: 8PX
SKU: 123644, Model: 8PX, Condition: Used, Electrical :, Max. Voltage: 600, Additional :, Phase: 3, Horizontal Bus Amps: 1200 A, Vertical Bus Amps: 440 A, Reference Number: Y7692-V013.
16" x 54" LeBlond #Regal, Servo engine lathe, 10" swing over cross slide, inch/metric, 3-jaw 10" chuck, 7.5 HP, #64845
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
SERIAL. 11C-505X-1438, MODEL. REGAL, SWING OVER WAYS. 16", SWING OVER CROSS. 10", CENTER DISTANCE. 60", SPINDLE SPEEDS. (12) 45 TO 1800 RPM, SPINDLE HOLE. 2-1/4", INCH THREADING. YES, METRIC THREADING. YES, TAPER. YES, THREAD DIAL. YES, CHUCK. 10" 3 JAW, MOTOR. 7.5 HP.
50 HP 1800 RPM General Electric, Frame L326HP16, TEFC BB EXP, 460 Volts, New Surplus
Romanoff Industries Inc | Toledo, OH
Category: Vertical Pump Motors
Seller: Romanoff Industries Inc
Location: Toledo, OH
Mfr: General Electric
Frame: L326HP16
Stock #: 87582 Category: Vertical Motors HP: 50 RPM: 1770.00 Frame: L326HP16 Enclosure: TEFCBB EXP Make: Electric Volts: 460 Service Factor: 1.0 Condition: New Surplus Location: Toledo, OH.
22" Cushman, 4-Jaw Lathe Chuck, L3 Mount, Rev Jaws
S and R Machines | Bristol, CT
Category: Lathe Chucks
Seller: S and R Machines
Location: Bristol, CT
Mfr: Cushman
eBaySHIPPING IS AN ESTIMATE, WE ALSO HAVE A 35" 3 JAW.
6" x 18" Parker #2Z, hand feed surface grinder, PMC, 20" vertical height, 7" x 5/8" x 1-1/4" wheel, 1.5 HP Parker spindle, power elevation, 1985
Seminole Machinery Company | Rochester, MI
Seller: Seminole Machinery Company
Location: Rochester, MI
Mfr: Parker
Model: 2Z
Year: 1985
Parker Majestic 6″ x 18″ 2Z Surface Grinder : 6″ x 18″ Capacity Permanet Magnetic Chuck 20″ Vertical Height From Centerline to Top of Table 7″ x 5/8″ x 1 1/4″ Wheel Size 1.5 HP Parker Spindle Power Elevation Oil Cup Lubrication 220 Volt.
JUST ADDED!
Morbidelli #CN-3A/CN-3B, CNC Feed-Thru Boring Machine, w/Doweling, 126" max X opening, 41.5" max Y opening, 114-246 FPM
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Morbidelli
Model: CN 3A / CN 3B
MORBIDELLI CN 3A / CN 3B BORING MACH. (FEED THRU CNC W/DOWELING):POS #1: MORBIDELLI CN 3A CNC Feed Through Boring Machine -- 3,200 mm (126") Max. opening cap. in "X" axis left-right; 215 mm (8-1/2") min. opening cap.; 1,056 mm (41-1/2") max. "Y" axis front-back cap.; 100 mm (3.9") min. front-back capacity. -- Right ...more
4' -13" Carlton #3A, Radial Arm Drill Press, 36" Horz. Head Travel on Arm, 31" Vert. Arm Travel on Column, 10 HP, 15-1500 RPM, 220/440 V
Norman Machine Tool Ltd | Baltimore, MD
Category: Radial Drills
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Carlton
Model: 3A
Carlton 48″ x 13″ Radial Arm Drill Press, 3A, Inventory # 9859, Model: 3A, S/N: 3A 3645, Arm Length: 48″, Column Diameter: 13″, Horizontal Head Travel on Arm: 36″, Vertical Arm Travel on Column: 31″, Vertical Spindle Travel in Head: 18″, Spindle Speed: 15 – 1,500 RPM (36 ...more
Siemens, 8PX, 600 Volts, 3-Phase Double-Sided Motor Control Center (MCC)
Lenmark Industries | Langley, BC
Category: Motor Control Centers
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Siemens
Model: 8PX
SKU: 123639, Model: 8PX, Condition: Used, Electrical :, Max. Voltage: 600, Additional :, Phase: 3, Horizontal Bus Amps: 1200 A, Vertical Bus Amps: 440 A, Reference Number: Y7692-V018.
24"/33.75" x 120" Mazak #Hercules Ajax engine lathe, inch/metric, 3-jaw 15" chuck, hardened & ground bed
Aleco Machinery Sales | Milwaukee, WI
Category: Engine Lathes
Seller: Aleco Machinery Sales
Location: Milwaukee, WI
Mfr: Mazak
Model: HERCULES
(1) Pre Owned 24"/33.75" X 120" MAZAK HERCULES AJAX ENGINE LATHE, Swing Over Bed 24”, Swing over Cross Slide 14.46, Swing over Removable Block Gap 33.75”, Length of Gap 16.34, Distance Beween Centers 10’, Spindle Bore 2.06”, Spindle Nose (Camlock Type) D1-8, Spindle Speeds 25 to 1,540 RPM ...more
Gannomat #260, semi-auto case clamp, 100" x 50" x 26" clamp capacity
Ex-Factory | Charlotte, NC
Category: Clamp - Case & Feed Thru
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Gannomat
Model: 260
GANNOMAT - 260: Case Clamp (Semi-Automatic): -- 100" x 50" x 26" Clamping Cap.; (3) vertical combination air cylinders & shoes mounted on horizontal beam for top pressure; 0.33 HP motor for up/down travel. -- (2) Combination air cylinders & shoes mounted on adjustable vertical, side pressure beam.Vertical beam ...more
21" x 64" Kingston #HL1500, gap bed engine lathe, 13" swing over cross slide, inch/metric, 3-jaw 12" chuck, 1988
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Kingston
Model: HL1500
Year: 1988
SERIAL. 08770111G, MODEL. HL 1500, YEAR. 1988, SWING OVER WAYS. 21", SWING OVER CROSS SLIDE. 13", SWING IN GAP. 29", LENGTH OF GAP. 9", DISTANCE BETWEEN CENTERS. 65", SPINDLE SPEEDS. 25 TO 1500 RPM, THREADS. ENGLISH & METRIC, THREAD DIAL. YES, SPINDLE HOLE. 3-1/8", CHUCK. 12" 3 JAW, FOOT BRAKE. YES, REMOVEALBLE ...more
Arboga / Prab #KB-20A, vertical axis chip shredder/crusher, 15 HP shredder drive, heavy duty base, 1999
Adams Machinery | Libertyville, IL
Category: Shredders
Seller: Adams Machinery
Location: Libertyville, IL
Mfr: Arboga Prab
Model: KB-20A
Year: 1999
Prab 12" Auger Type Loading Conveyor. Prab Vertical Feed Hopper. 15 HP Shredder Drive. Heavy Duty Base., Ideally suited for handling bushy wads of stringy turnings in continuous operations. Rated 800-1000 Kg/hr Steel and 250-300 Kg/hr.
8 Stand, Yoder #M1-1/2, rollformer, 1.5" arbor, 8" roll space, 11" horizontal centers, 4"-7" vertical adj.
Yoder Brothers Machinery | Toledo, OH
Category: Rollformers
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Yoder
Model: M1-1/2
SERIAL. Y14320, MODEL. #M1-1/2, NUMBER OF STANDS. 8, ARBOR DIAMETER. 1-1/2", ROLL SPACE. 8", HORIZONTAL CENTERS. 11", VERTICAL ADJUSTMENT. 4" TO 7", LOWER SPINDLE TO BASE. 5-3/4".
Blanchard #36HD-66, 150 HP geared head spindle, 84" swing, 48" vertical capacity
Nash Tool & Machine Supply | Warren, MI
Seller: Nash Tool & Machine Supply
Location: Warren, MI
Mfr: Blanchard
Model: 36HD-66
QUOTATION, NASH TOOL & MACHINE SUPPLY, INC., 22701 Nagel Street, Warren, Michigan (Detroit suburb), 586-914-4478 cellular, e-mail—nashmachinery@yahoo.com, web—www.nashmachinery.com, BLANCHARD MODEL 36HD66 HIGH POWER ROTARY SURFACE GRINDER, (extra height column), Serial number 15106; built 1980 approx. ...more
210 gallon Stainless Steel Tank, Vertical, 36" diameter x 48" Straight Side, Dish Top and Bottom, 4 Outlet
Perry Videx LLC | Hainesport, NJ
Category: Stainless Steel Tanks and Vessels
Seller: Perry Videx LLC
Location: Hainesport, NJ
Used Approximately 210 Gallon Stainless Steel Tank, Capacity: 210 gallons, Dimensions: 36" dia. x 48" straight side, Dish top, dish bottom, 4" outlet, _UNKNOWN_ 210 GALLON, Capacity. 210 gal, Diameter. 3', Height. 4', Type of stainless., Type Of Heads. Dished, Vertical/Horizontal. Veritcal, Legs/Lugs/Skirt. ...more
Fanuc, ER-4iA R30iBMate+, 6-Axis robot w/ controller & transformer, 13.2 lb. payload, 2023
Global Machine Brokers LLC | Guilford, CT
Category: Industrial Robots
Seller: Global Machine Brokers LLC
Location: Guilford, CT
Mfr: Fanuc
Model: ER-4IA R30IBMATE+
Year: 2023
2023 FANUC ER-4iA, # Axis. 6, Payload. 13.2 lb, Horizontal Reach. 550 mm, Vertical Reach. 880 mm.
Ch Vertical Adapter Kit Unused Surplus For Mdn 800a-2000 Amps 3 Pole, 65 Ka
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Cutler-Hammer
Manufacturer Westinghouse / Cutler Hammer Product Family MDS Type of Current Carrying Part VERTICAL ADAPTER Unit Amperage 800A-2000A For Equipment Type MDN Shipping Width 10 in Shipping Height 10 in Shipping Depth 10 in Shipping Weight 14 lb.
JUST ADDED!
Hemsaw #V100-HA-HC-CTS, vertical automatic bandsaw
Smith Machinery Co | Ames, IA
Category: Vertical Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Hemsaw
Model: V100-HA-HC-CTS
Saw: Vertical, Automatic Production Band Saw, Saw Capacity: 18" Horizontal, 31" Vertical @ 90, Miter: 18" Horizontal, 18" Vertical @ 45 (Both Directions), Blade Size: 1-1/4" x 16'6" x.042” THK, Blade Drive: Hydraulic motor is used to power the band., Blade Speed: Variable blade speed of 100-320 SFPM. Blade ...more
JUST ADDED!
Kearney & Trecker #3CK, Horizontal Planer Mill, 63" x 16" table, 34" longitudinal travel, 12" cross travel, 18" vertical travel, 15 HP, 1500 RPM
Yoder Machinery Sales | Holland, OH
Category: Planer Type Millers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Kearney & Trecker
SERIAL. #968012, MODEL. #3CK, AREA OF TABLE. 63-1/2" X 16-1/2", SPINDLE SPEEDS. (24) 15 TO 1500 RPM, LONGITUDINAL & CROSS FEEDS. (32) 3/8 TO 90 IPM, VERTICAL FEEDS. (32) 3/16 TO 45 IPM, LONGITUDINAL TRAVEL. 34", CROSS TRAVEL. 12", VERTICAL TRAVEL. 18", TAPER IN SPINDLE. #50 NS, DISTANCE CENTER LINE OF SPINDLE TO ...more
1000 gallon Stainless Steel Vertical Mix Tank, 60" diameter x 80" height, center-mounted agitator
Perry Videx LLC | Hainesport, NJ
Category: Stainless Steel Tanks and Vessels
Seller: Perry Videx LLC
Location: Hainesport, NJ
Used Approximately 1,000 Gallon Stainless Steel Mix Tank, Capacity: 1,000 gallons, Dimensions: 60" dia. X 80" straight side, Top, center-mounted agitator, Dished top, dished bottom, Mounted on (4) legs, _UNKNOWN_ 1,000 GALLON, Capacity. 1,000 gal, Diameter. 60", Height. 80", Type of stainless. Stainless Steel, Type Of ...more
Flat back lathe chuck
Yoder Machinery Sales | Holland, OH
Category: Lathe Chucks
Seller: Yoder Machinery Sales
Location: Holland, OH
DIAMETER OF CHUCK. 60", NUMBER OF JAWS. 3.
48" width x 48" H x 48" L Wisconsin, 500°F, electric
Furnace Brokers International | Tolland, CT
Category: Walk-in Type Ovens
Seller: Furnace Brokers International
Location: ROCKFORD, IL
Mfr: Wisconsin
Year: 2014
WISCONSIN ELECTRIC WALK IN OVEN 48"WIDE X 48"LONG X 48"HIGH 500 F WITH VERTICAL LIFT FRONT DOOR.
Industrial 156" Turntable Washer
R G Hanson Co Inc | Milan, IL
Category: Turntable Parts Washers
Seller: R G Hanson Co Inc
Location: Milan, IL
Remanufactured with two year warranty, 156” diameter turntable, 90” of vertical clearance, 60,000 lb. Weight capacity, 600GPM@200PSI pump, automatic oil sludge removal removal, Maxon gas burner for heat..
JUST ADDED!
350 HP 1800 RPM General Electric, Frame L5011VP20, TEFC BB, 2400 Volts, New Surplus
Romanoff Industries Inc | Toledo, OH
Category: Vertical Pump Motors
Seller: Romanoff Industries Inc
Location: Toledo, OH
Mfr: General Electric
Frame: L5011VP20
Stock #: 92917 Category: Vertical Motors HP: 350 RPM: 1785.00 Frame: L5011VP20 Enclosure: TEFCBB Make: Electric Volts: 2400 Service Factor: 1.00 Condition: New Surplus Location: Toledo, OH.
Bridgeport #Series-I, ram type vertical mill, 9" x42" table, 1.5 HP, 2-Axis Newall digital read out, #76551
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bridgeport
Model: SERIES-I
SERIAL., MODEL. SERIES I, AREA OF TABLE. 42" X 9", SPINDLE SPEEDS, VARIABLE. 60 TO 4200 RPM, SPINDLE FEEDS.0015,.003,.006 IPR, LONGITUDINAL TABLE TRAVEL. 30", CROSS TRAVEL. 12", VERTICAL KNEE TRAVEL. 16", QUILL TRAVEL. 5", RAM TRAVEL. 12", DEPTH OF THROAT. 6-3/4" TO 18-3/4", TAPER IN SPINDLE. R8, HEAD TILTS ...more
JUST ADDED!
Kent #CGS-618M, Manual Hand-feed Surface Grinder, 3 HP, 3450 RPM, 6" x 18" Working Table, 2019
Revelation Machinery | Chicago, IL
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Kent
Model: CGS-618M
Year: 2019
Make: Kent, Model: CGS-618M, Year: 2019, Machine Location: California, Table Working Area: 6″ × 18″, Longitudinal Table Travel: 19″, Saddle Travel: 7.69″, T‑Slot: 1 × 9/16″, Spindle Motor: 3 HP, Spindle Speed: 3450 RPM, Grinding Wheel Size: 8″ × 3/4″ ...more
10" x 30" Brown & Sharpe #1030-MicroMaster, 14" x1.5" x5" wheel, hydraulic X-Y Axis, fine feeds, electromagnetic chuck, coolant, automatic lube, 1983, #146768
Machinery Values Inc | Harrison, NJ
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Brown & Sharpe
Model: 1030-MICROMASTER
Year: 1983
10" X″0" BROWN… SHARPE "SUPER-PRECISION", (MADE IN USA) HYDRAULIC SURFACE GRINDER, MODEL: #1030 MICROMASTER, S/N: 523-1030-2325, NEW: 1983, WORKTABLE SIZE. 10" X″0", GRINDS WORK TO HEIGHT OF. 18" (W/14" WHEEL), WHEEL SIZES. 14" X 1- 1/2" X 5", DIRECT DRIVE SPINDLE MOTOR. 5 HP - 1800 RPM ...more
3500 gallon Falco, Stainless Steel Mix Tank, Vertical, 84" diameter x 144" Straight Side, Cone Top and Bottom
Perry Videx LLC | Hainesport, NJ
Category: Stainless Steel Tanks and Vessels
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Falco
Year: 1994
Used Approximately 3,500 Gallon Stainless Steel Mix Tank, Capacity: 3,500 gallons, Manufacturer: Falco, Serial: 3412, Year: 1994, Dimensions: 84" dia. x 144" straight side, Cone top, cone bottom, Top, center-mounted agitator, Material of construction: 304 stainless steel, Mounted on legs, 1994 FALCO 3,500 GALLON ...more
Bridgeport #Series-I, vertical mill, 9" x42" table, 2 HP, AcuRite II 2-Axis digital read out, 1 shot lube
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bridgeport
Model: SERIES-I
SERIAL.: 219187, MODEL.: SERIES I, AREA OF TABLE.: 42" X 9", SPINDLE SPEEDS.: 60 TO 4200 RPM, SPINDLE FEEDS.:.0015,.003,.006 IPR, LONGITUDINAL TABLE TRAVEL.: 30", CROSS TRAVEL.: 12", VERTICAL KNEE TRAVEL.: 16", QUILL TRAVEL.: 5", RAM TRAVEL.: 12", DEPTH OF THROAT.: 6-3/4" TO 18-3/4", TAPER IN SPINDLE.: R8, HEAD TILTS ...more
Acer #3CVS, vertical mill, 9" x42"tbl., 3 HP, 4500 RPM, R-8, X-Axis power feed, Newall digital read out, maxi power draw bar
Machinery Central | Louisville, KY
Seller: Machinery Central
Location: Louisville, KY
Mfr: Acer
Model: 3CVS
, Acer 3CVS 3HP vertical mill, used, 1996. s Newall DRO, power drawbar, 9" x 42" table, 3 hp motor, and R8 taper. Travel: longitudinal 28", cross 12", knee 16". Spindle speed 60-4,500 RPM. 3-phase, ideal for precision machining needs., Spec Sheet:, Acer 3CVS Mill, X-axis Power Feed, Maxi Rite Power Drawbar, Newall ...more
200 HP 600 RPM Siemens, Frame 507UP, WPIIBB, 460 Volts
Romanoff Industries Inc | Toledo, OH
Category: Vertical Pump Motors
Seller: Romanoff Industries Inc
Location: Toledo, OH
Mfr: Siemens
Frame: 507UP
Stock #: 56296 Category: Vertical Motors HP: 200 RPM: 585.00 Frame: 507UP Enclosure: WPIIBB Make: Siemens Volts: 460 Service Factor: 1.15 Condition: Electrically O.K. Location: Toledo, OH.
1000 HP 1200 RPM Continental, Frame 689HSP, WPIBB, 4160 Volts
Romanoff Industries Inc | Toledo, OH
Category: Vertical Pump Motors
Seller: Romanoff Industries Inc
Location: Toledo, OH
Mfr: Continental
Frame: 689HSP
Stock #: 79098 Category: Vertical Motors HP: 1000 RPM: 1192.00 Frame: 689HSP Enclosure: WPIBB Make: Continental Volts: 4160 Service Factor: 1.15 Condition: Electrically O.K. Location: Toledo, OH.
Blanchard #11-16, vertical spindle rotary surface grinder, 16" mag chuck, 1968, #16573
F P Miller Company | Jackson, MI
Seller: F P Miller Company
Location: Jackson, MI
Mfr: Blanchard
Model: 11-16
Year: 1968
, Spindle Motor: 15HP, 240/480 volt, Range: 20" Diameter x 9" Vertical over Chuck, Chuck: 16" Diameter, Chuck Speeds: 15, 24, 41, 64 RPM, Grinding Wheel: TBD, Grinding Wheel Speed: 1200 RPM, Feeds:.003 -.070 IPM, Automatic lube systems, Standard Coolant System (Paper Filtration system available), Floor Space: ...more
15" x 50" Clausing #15", engine lathe, 9-1/2" swing over cross slide, Mimik tracer, 7-1/2 HP, #75138
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Clausing
Model: 15
SERIAL. 6/0015/06086, MODEL. 15", SWING OVER BED. 15-14", SWING OVER CROSS SLIDE. 9-1/2", DISTANCE BETWEEN CENTERS. 50", BAR CAPACITY THRU SPINDLE. 2-1/8", SPINDLE NOSE. 6" DL CAMLOCK, SPINDLE SPEEDS. (16) 25 TO 2000 RPM, THREADS, US. (45) 2 TO 72, THREADS, METRIC. (39).2 TO 14, LONGITUDINAL FEEDS.0015" TO.040", CROSS ...more
Knuth #Servomill-UFM-8-V, Servoconventional Milling Machine
Blumberg Machinery Co | Bannockburn, IL
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Knuth
Model: SERVOMILL-UFM-8-V
Working AreaTable dimensions 63x13 in Table load capacity 990 lbs Number of T-slots 3 positions T-slots, width 0.7 in T-slots, spacing 3.1 in TravelsTravel X-axis 51.2 in Travel Y-axis 11 in Travel Z-axis 18 in Top slide travel 22 in Vertical Milling HeadSpeed range (2) 80-650 / 650-5000 rpm Spindle mount SK 40 / DIN ...more
7000 gallon Stainless Steel Mix Tank, Vertical, 120" diameter x 144" Straight Side, Dish Top and Bottom
Perry Videx LLC | Hainesport, NJ
Category: Stainless Steel Tanks and Vessels
Seller: Perry Videx LLC
Location: Hainesport, NJ
Used Approximately 7,000 Gallon Stainless Steel Mix Tank, Capacity: 7,000 gallons, Dimensions: 120" dia. x 144" straight side, Dished top, dished bottom, Top off-center mounted agitator, Mounted on (4) stainless steel legs, _UNKNOWN_ 7,000 GALLON, Capacity. 7,000 gal, Diameter. 10', Height. 12', Type of ...more
19 Stand, Contour #CR-A-H-3-1/2 rafted rollformer, 24" roll space, 2-1/2"shaft diameter, 2 bases
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Contour
Model: CR-A-H-3-1/2
SERIAL. 84-048MODEL. CR A-H-3-1/2NUMBER OF STANDS. 19NUMBER OF BASES. 2ROLL SPACE. 24"DIAMETER OF SHAFT. 2-1/2"VERTICAL RANGE. 5-1/2" MIN; 8-1/2" MAXBASE TO CENTERLINE OF LOWER SHAFT. 7-1/2"UPPER ARBOR ADJUSTMENT. 3"HORIZONTAL CENTER DISTANCE. 19"GEARING. RAFTED. 4 X 4 1 X 3U JOINTS. YESCONTROL PANEL. YESCOOLANT BASE. ...more
Birmingham #BPV-1054, ram type vertical mill, 10" x54" table, 3 HP, R-8,2000, #63982
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Birmingham
Model: BPV-1054
Year: 2000
SERIAL. 002256, MODEL. BPV-1054, YEAR NEW. 2000, AREA OF TABLE. 10" X 54", SPINDLE SPEEDS (VARIABLE). 60 TO 4300 RPM, LONGITUDINAL TRAVEL. 38", VERTICAL KNEE TRAVEL. 18", CROSS TRAVEL. 18", QUILL TRAVEL. 5", QUILL FEEDS. 002,004 &.006 IPR, RAM TRAVEL. 17-3/4", DEPTH OF THROAT. 6.7" TO 23.8", TAPER IN SPINDLE. R8 ...more
Yoder #M2, 2" rollforming heads, 13" roll space, old style head
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Yoder
Model: M2
ARBOR DIAMETER. 2", ROLL SPACE. 13", VERTICAL ADJUSTMENT. 4" TO 7", LOWER SHAFT CENTER TO BASE. 7", OLD STYLE HEAD. YES.
Vertical head
Yoder Machinery Sales | Holland, OH
Category: Vertical Head Attachments
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Vertical Head
1.65 Ton, Clansman Clansman #C2100, forging rail-bond manipulator, 1500 KG, 1800mm vertical arm length, 2600mm horizontal arm length
National Machinery Exchange | Newark, NJ
Category: Forging Manipulators
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Clansman
CLANSMAN DYNAMIC MODEL#C2100 FORGING RAIL BOUND MANIPULATOR, 1500kg Lifting Capacity;, 1800mm Vertical Arm Length;, 2600mm Horizontal Arm Length, Speeds = 60 deg/s Slew, 1.0m/s Vertical, 0.8m/s Horizontal, 1.0m/s Long Travel, 270 deg cab rotation;, 0-750mm Gripper Size;, 400L Hydraulic Tank (aw46), (AW46);, 460VAC 3PH ...more
JUST ADDED!
4000 lb. PM, C-Hook, 12" arm, 1" frame, 21-1/4" gap
Midwest Machinery LLC | Livonia, MI
Category: C-hooks
Seller: Midwest Machinery LLC
Location: Livonia, MI
Mfr: Pm
Weight Capacity: 4,000Lbs, Arm Length: 12", Vertical Distance: 21-1/4", Frame Thickness: 1".
7.16 sq.ft. Niagara #18-4-D, filter, vertical tank, Stainless Steel, .96 cu.ft., 75 psi, horizontal plate design, #22936 (2 available)
Federal Equipment Company | Cleveland, OH
Category: Pressure Leaf Filters
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Niagara
Model: 18-4-D
Used Niagara Filter, Model 18-4-D, vertical tank, horizontal plate design, stainless steel construction, 7.16 sq. ft. surface area,.96 cu. ft. cake capacity, rated 75 PSI internal, Serial No. FX-56137.
Yaskawa, Motoman EH-200-150, Robot, 6-Axis, 441 lb. Payload, 104.4" H-Reach, 132.8" V-Reach
Aces Robotics Ltd | Toronto, ON
Category: Industrial Robots
Seller: Aces Robotics Ltd
Location: Toronto, ON
Mfr: Yaskawa
Model: MOTOMAN EH-200-150
MOTOMAN EH 200 - 150 used robot, featuring 6 axes, a 441 lb payload, a 104.4" horizontal reach, and a 132.8" vertical reach. Ideal for demanding applications requiring precision and versatility., Yaskawa Motoman EH 200 - 150.
18" Buck, 4-jaw lathe chuck
Machinery Central | Louisville, KY
Category: Lathe Chucks
Seller: Machinery Central
Location: Louisville, KY
Mfr: Buck
, Buck 18" 4 Jaw Lathe Chuck, used. From BUCK, this tooling is ideal for precision work. s an overall diameter of 18" with stamped marking 1318. Perfect for enhancing your lathe capabilities efficiently., Spec Sheet:, Buck 18" - 4 Jaw Lathe Chuck, USED, Brand: Buck, 4 Jaw Chuck, Overall Diameter: 18, Stamped Marking: ...more
350 gallon Stainless Steel vertical tank, 48" dia. x 48" straight side, flat top & bottom heads
Perry Videx LLC | Hainesport, NJ
Category: Stainless Steel Tanks and Vessels
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Stainless
Used Approximately 350 Gallon Stainless Steel Tank, Capacity: 350 gallons, Dimensions: 48" dia. x 4' straight side, Flat top, flat bottom, _UNKNOWN_ 350 GALLON, Capacity. 350 gal, Diameter. 4', Height. 4', Type of stainless. Stainless Steel, Type Of Heads. Flat, Vertical/Horizontal. Vertical, Dimensions. ...more
12" x 24" Jet #JPSG-1224A, 3X automatic, electromagnetic chuck, coolant/filter, 2002, stock #7181
AM Metalmaq Inc | Hialeah, FL
Seller: AM Metalmaq Inc
Location: Hialeah, FL
Mfr: Jet
Model: JPSG-1224A
Year: 2002
Model number JPSG-1224A, Stock number 414524, Year of manufacture 2002, Table size 12" x 24", Longitudinal table travel (max) 25-1/2", Crossfeed table travel (max) 12-3/16", Maximum table load 880 lbs., Height without chuck 20", Grinding wheel (D x W x B) 12" x 1-1/2" x 3", Spindle motor 3 HP, Longitudinal travel ...more
Siemens, 8PX, 600 Volts, Motor Control Center, 3PH
Lenmark Industries | Langley, BC
Category: Motor Control Centers
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Siemens
Model: 8PX
SKU: 122689, Model: 8PX, Condition: Used, Electrical :, Max. Voltage: 600, Made In: CANADA, Additional :, Voltage: 600V, Horizontal Bus Amps: 1200A, Vertical Bus Amps: 440A, Phase: 3.
Lucas 3" boring mill outboard support, 2-1/2" hole, 27" x13-3/4" base, 56" OA hght, #17903
Yoder Machinery Sales | Holland, OH
Category: Outboard Supports
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Lucas
MAKE. LUCAS, HOLE. 2-1/2", VERTICAL TRAVEL. 36", BASE AREA. 27" X 13-3/4", OVERALL HEIGHT. 56".
Bridgeport #Series-II, vertical mill, 11" x58" table, 4 HP, Futaba Pulscale control, #75843
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bridgeport
Model: SERIES-II
SERIAL. 3439, MODEL. SERIES II, SPINDLE SPEEDS, VARIABLE. 50 TO 3400 RPM, AREA OF TABLE. 58" X 11", LONGITUDINAL TRAVEL (TABLE). 30", CROSS TRAVEL (SADDLE). 15", VERTICAL TRAVEL (KNEE). 16", QUILL TRAVEL POWERED. 5", TAPER IN SPINDLE. #40NS, POWER TABLE AND SADDLE FEED. 3/8 TO 24 IPM, RAPID TRAVERSE. 24 IPM, HEAD ...more
100 HP 1800 RPM Reliance, Frame 405LP, TEFC BB, 480 Volts
Romanoff Industries Inc | Toledo, OH
Category: Vertical Pump Motors
Seller: Romanoff Industries Inc
Location: Toledo, OH
Mfr: Reliance
Frame: 405LP
Stock #: 83045 Category: Vertical Motors HP: 100 RPM: 1775.00 Frame: 405LP Enclosure: TEFCBB Make: Reliance Volts: 480 Service Factor: 1.15 Condition: Electrically O.K. Location: Toledo, OH.
16" x 40" Kent #SGS-1640AHD, Automatic Surface Grinder, 43" Table Travel, 17.75" Saddle Travel, 14" x 1.25" x 5" Grinding Wheel, 7.5 HP, 1750 RPM, new
Norman Machine Tool Ltd | Baltimore, MD
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Kent
Model: SGS-1640AHD
Kent 16″ x 40″ Automatic Surface Grinder, SGS-1640AHD, Inventory # 8141, Model: SGS-1640AHD, Table Travel: 43″, Saddle Travel: 17 3/4″, Working Capacity: 16″ x 40″, T-Slot: 1 x 9/16″, Spindle Speed: 1,750 RPM, Grinding Wheel: 14″ x 1 1/4″ x 5″, Vertical ...more
7500 gallon Stainless Steel Jacketed Mix Tank, Vertical, 136" diameter x 120" Straight Side, Dish Top and Bottom
Perry Videx LLC | Hainesport, NJ
Category: Stainless Steel Tanks and Vessels
Seller: Perry Videx LLC
Location: Hainesport, NJ
Used Approximately 7,500 Gallon 304 Stainless Steel Mix Tank, Capacity: 7,500 Gallon, Dimensions: 136" dia. x 120" straight side, Dished top, dished bottom, Top bridge-mounted agitator with 4-blade mixer, Top manway, side bottom manway, Center bottom discharge, Mounted on legs, _UNKNOWN_ 7,500 GALLON, Capacity. 7,500 ...more
12' x 12' Red-D-Arc #MD12x12, manipulator with subarc package
Mitrowski Welding Equipment | South Houston, TX
Category: Welding Manipulators
Seller: Mitrowski Welding Equipment
Location: South Houston, TX
Mfr: Red-D-Arc
Used Red-D-Arc 12x12 Manipulator with Subarc Package, Model: MD12x12, Manufacturer: Key Plant, Serial: 07256, 12 ft of Vertical Travel, 12 ft of Horizontal Travel, 460 Volt Input, Bolt Down Base, Hand Pendant Controller, 90 Day Warranty.
150 HP 1800 RPM Reliance #B409920, Frame 445LP, vert mount
IronHub | Calgary, AB
Category: Squirrel Cage AC Electric Motor
Seller: IronHub
Location: Onoway, AB
Mfr: Reliance
Frame: 445LP
For sale: an unused electric motor manufactured by Reliance, model B409920. This motor boasts a maximum power of 150 horsepower and operates at a rated speed of 1800 RPM. Designed for vertical mounting, it s a TEFC (Totally Enclosed Fan Cooled) enclosure and operates at 575 volts. The overall weight is approximately ...more
125 gallon Stainless Steel Tank, 24" diameter x 48" straight side x 24" deep cone bottom, 6" diameter Tangential side inlet, 4" diameter Center bottom outlet, 1.5 HP
Machinery & Equipment Co | Brisbane, CA
Category: Stainless Steel Food Tanks
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: S/s
Tank, 125 gallon, 316 stainless steel, 24" diameter x 48" straight side x 24" deep cone bottom. Vertical tank with quick opening top, last used as flash vessel for cheese cooling and evaporating, 6" diameter, tangential side inlet, 4" diameter center bottom outlet, with Tri-Clover fitting, 1.5 HP motor with ...more
TAS #42B, mill, impact, Carbon Steel, 350 HP (2 available)
Machinery & Equipment Co | Brisbane, CA
Category: Mills
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Tas
Model: 42B
Carbon steel mill, impact, TAS, carbon steel, 350 hp, mdl 42b (2). (2) Vertical shaft impact mill, Theory Application Service (TAS) Model 42B with 350 HP vertical v-belted electric motor drive. Mill has a 42" diameter 5-stage rotor and Drawings available. Each, last used to mill coal to 200 mesh for kiln feed at the ...more
Featured
250 HP 1800 RPM Weg, Frame 5006/7/8T, TEFC BB, 460 Volts, New Surplus
Romanoff Industries Inc | Toledo, OH
Category: Vertical Pump Motors
Seller: Romanoff Industries Inc
Location: Toledo, OH
Mfr: Weg
Frame: 5006/7/8T
Stock #: 78403 Category: Vertical Motors HP: 250 RPM: 1780.00 Frame: 5006/7/8T Enclosure: TEFCBB Make: Weg Volts: 460 Service Factor: 1.15 Condition: New Surplus Location: Toledo, OH.
Rennco #301, Semi-automatic Vertical L-bar Sealer, 2010
Revelation Machinery | Chicago, IL
Category: Sealers and Sealing Systems
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Rennco
Model: 301
Year: 2010
Make: Rennco, Model: 301, Year: 2010, Machine Location: Upon Request, Rennco Semi-Automatic Vertical L-Bar Sealer Model 301, 2010, – Dimensions: 63 1/8” W x 69” L x 73” H (89” top of light, curtain), – Standard Vertical Seal: 14” (18” Optional), – Standard ...more
Siemens, Y7692-V005, 600 Volts 3 Phase Model 8PX Motor Control Centre
Lenmark Industries | Langley, BC
Category: Motor Control Centers
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Siemens
Model: Y7692-V005
SKU: 122661, Model: Y7692 V003, Condition: Used, Electrical :, Max. Voltage: 600, Made In: CANADA, Additional :, Voltage: 600V, Horizontal Bus Amps: 1200A, Vertical Bus Amps: 440A, Phase: 3.
Carr Lane - MF40-1001 Pivoting Edge Clamp
Machinery Central | Louisville, KY
Seller: Machinery Central
Location: Louisville, KY
Mfr: Carr
, Carr Lane MF40-1001 Pivoting Edge Clamp in used condition. s include 1/2-13 mounting screw size, a max horizontal clamping force of 2000 lbs, and a max vertical clamping force of 220 lbs. Ideal for various tooling and accessory needs., Spec Sheet:, Carr Lane - MF40-1001 Pivoting Edge Clamp, USED, Brand: Carr Lane ...more
Vanguard #X6140, universal knee horizontal milling machine, 3-Axis digital read out, horizontal spindle with arbor support, power feeds, universal swiveling table, coolant pump & piping, 2008
Harris Machine Tools, Inc. | Houston, TX
Category: Universal Milling Machine - Horizontal
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Vanguard
Model: X6140
Year: 2008
TABLE SIZE: 67" X 15.7", T-SLOTS: 3 (0.7" AT 3.5" CENTERS), TABLE LOAD CAPACITY: 1,760 LBS., TABLE SWIVEL: ±45 DEG., TABLE LONGITUDINAL TRAVEL: 35.4" MANUAL / 34.6" AUTO, TABLE CROSS TRAVEL: 12.4" MANUAL / 11.8" AUTO, TABLE VERTICAL TRAVEL: 14.96" MANUAL / 14.17" AUTO, SPINDLE SPEEDS: (18) 30 - 1500 RPM ...more
JUST ADDED!
Trennjaeger #TUS425DGA, automatic steel circular saw, with INTE comp touch Control, 16.7" saw blade, 5.3 HP, 42-688 FPM, infinitely variable cutting speed, adjustable vertical vises, chip drawer, 2024
Perfection Industrial Sales | Elk Grove Village, IL
Category: Circular Saws
Seller: Perfection Industrial Sales
Location: New Haven, MO
Mfr: Trennjaeger
Model: TUS425DGA
Year: 2024
Trennjaeger TUS425DGA, w/ INTE Comp. Touch Control, 16.7" Saw Blade Ø, 42-688 FPM, 5.3 HP, Infinitely Variable Cutting Speed, Adjustable Vertical Vises, Clamping Base Plate, Chip Drawer, 2024.
250 HP 720 RPM U.S. Motors, Frame 5809PH, WPIBB, 4160 Volts
Romanoff Industries Inc | Toledo, OH
Category: Vertical Pump Motors
Seller: Romanoff Industries Inc
Location: Toledo, OH
Mfr: U.S. Motors
Frame: 5809PH
Stock #: 71316 Category: Vertical Motors HP: 250 RPM: 708.00 Frame: 5809PH Enclosure: WPIBB Make: US Motors Volts: 4160 Service Factor: 1.15 Condition: Electrically O.K. Location: Toledo, OH.
250 HP 1200 RPM U.S. Motors, Frame 5009P, WPIIBB, 4000 Volts
Romanoff Industries Inc | Toledo, OH
Category: Vertical Pump Motors
Seller: Romanoff Industries Inc
Location: Toledo, OH
Mfr: U.S. Motors
Frame: 5009P
Stock #: 84224 Category: Vertical Motors HP: 250 RPM: 1190.00 Frame: 5009P Enclosure: WPIIBB Make: US Motors Volts: 4000 Service Factor: 1.0 Condition: Electrically O.K. Location: Toledo, OH.
300 HP 1800 RPM General Electric, Frame L449VP20, WPIBB, 460 Volts
Romanoff Industries Inc | Toledo, OH
Category: Vertical Pump Motors
Seller: Romanoff Industries Inc
Location: Toledo, OH
Mfr: General Electric
Frame: L449VP20
Stock #: 92468 Category: Vertical Motors HP: 300 RPM: 1790.00 Frame: L449VP20 Enclosure: WPIBB Make: Electric Volts: 460 Service Factor: 1.15 Condition: Electrically O.K. Location: Toledo, OH.
450 HP 1200 RPM Aurora, Frame 5809TP, WPIBB, 4160 Volts, New Surplus
Romanoff Industries Inc | Toledo, OH
Category: Vertical Pump Motors
Seller: Romanoff Industries Inc
Location: Toledo, OH
Mfr: Aurora
Frame: 5809TP
Stock #: 92028 Category: Vertical Motors HP: 450 RPM: 1194.00 Frame: 5809TP Enclosure: WPIBB Make: Aurora Volts: 4160 Service Factor: 1.15 Condition: New Surplus Location: Toledo, OH.
500 HP 720 RPM Siemens-allis, Frame 30K, WPIIBB, 4000 Volts
Romanoff Industries Inc | Toledo, OH
Category: Vertical Pump Motors
Seller: Romanoff Industries Inc
Location: Toledo, OH
Mfr: Siemens-Allis
Frame: 30K
Stock #: 69473 Category: Vertical Motors HP: 500 RPM: 710.00 Frame: 30K Enclosure: WPIIBB Make: Siemens-allis Volts: 4000 Service Factor: 1.0 Condition: Electrically O.K. Location: Toledo, OH.
500 HP 900 RPM U.S. Motors, Frame 5810P, WPIBB, 460 Volts
Romanoff Industries Inc | Toledo, OH
Category: Vertical Pump Motors
Seller: Romanoff Industries Inc
Location: Toledo, OH
Mfr: U.S. Motors
Frame: 5810P
Stock #: 72811 Category: Vertical Motors HP: 500 RPM: 890.00 Frame: 5810P Enclosure: WPIBB Make: US Motors Volts: 460 Service Factor: 1.15 Condition: Electrically O.K. Location: Toledo, OH.
800 HP 1800 RPM General Electric, Frame L5011VPZ30, WPIBB, 4000 Volts
Romanoff Industries Inc | Toledo, OH
Category: Vertical Pump Motors
Seller: Romanoff Industries Inc
Location: Toledo, OH
Mfr: General Electric
Frame: L5011VPZ30
Stock #: 85095 Category: Vertical Motors HP: 800 RPM: 1775.00 Frame: L5011VPZ30 Enclosure: WPIBB Make: Electric Volts: 4000 Service Factor: 1.15 Condition: Electrically O.K. Location: Toledo, OH.
9 Stand, Yoder, rollformer, 3" arbor diameter, 26" roll space, 18" horizontal centers, 5.5"-10"vertical adj range
Perfection Global | Elk Grove Village, IL
Category: Rollformers
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Yoder
Number of Stands: 9Shaft Diameter: 3"Roll Space: 26"Vertical Adjustment Range: 5.5" - 10"Horizontal Centers: 18"Base to CL of Bottom Shaft Distance: 8.5", (1) 7-Stand Base w/ (2) Stands & Side Guide Stands(1) 8-Stand Base w/ (7) Stands & Exit Straightening Fixture.
20000 lb. Iowa #CC20M, coil car, 60" width, 72" O.D., 14" vertical lift
D & H Machinery Inc | Toledo, OH
Category: Coil Cars
Seller: D & H Machinery Inc
Location: Rockford, IL
Mfr: Iowa
Model: CC20M
Iowa Precision Coil Car, Model CC20M, Maximum Coil Weight: 20,000 lbs., Coil Width: 60", Coil O.D.: 72", Vertical Lift: 14" Approx., -Less Hydraulics and Controls (were supplied from Uncoiler), -0verall Size: 56" L x 38" W x, 3,000 lbs., -In Storage: Toledo, OH.
18" x 60" Elliott #15, engine lathe, 10" swing over cross slide, inch/metric, 3-jaw chuck, Steady Rest, taper
D & D Industries Inc | Monclova, OH
Category: Engine Lathes
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Elliott
Model: 15
MODEL #: 15, SERIAL # 400-1500-18-4116, 18" SWING, 60" CENTERS, 20-2000 RPM, 10" SWING OVER CROSS SLIDE, 2.5" SPINDLE HOLE, 3 JAW CHUCK, STEADY REST, TAPER, INCH AND METRIC THREADS, TOOL POST HOLDER, 117" LR 50" FB x 50" TALL, 6500 LBS ESTIMATED WEIGHT, GOOD CONDITION.
Supermax #YCM-2H, heavy-duty horizontal mill,pendant Control, 11" x52"table work surface, 5 HP
Mohawk Machinery Inc | Cincinnati, OH
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Supermax
Model: YCM-2H
YCM-2H SUPERMAX HEAVY-DUTY HORIZONTAL MILL, Serial No 9031252, Model YCM-2H, YCM-2H SUPERMAX HEAVY-DUTY HORIZONTAL MILL, Serial No 9031252, Model YCM-2H, Pendant Control, 5 Horsepower, Power Longitudinal & Cross Table Feed, Backlash Compensation, Hardened & Ground Square Ways, CATALOG :, Table Working Surface ...more
10" SP, 3-jaw chuck lathe
Machinery Central | Louisville, KY
Category: Lathe Chucks
Seller: Machinery Central
Location: Louisville, KY
, SP MFG 3-JAW LATHE CHUCK 10 in with plain back mount. Used, suitable for various tooling tasks. Overall diameter: 10, center hole: 2.25, height: 5.25. Ideal for those seeking reliable lathe accessories., Spec Sheet:, SP MFG 3-JAW LATHE CHUCK 10 in - w/ PLAIN BACK MOUNT, USED, Brand: SP MFG, Type: 3 Jaw Chuck ...more
19" 4-jaw Lathe Chuck
G-2000 | Toledo, OH
Category: Lathe Chucks
Seller: G-2000
Location: Toledo, OH
4 JAW, 6" THRU HOLE, THREAD TYPE MOUNTING, Machine Type.Chucks Manufacturer.N/A Model.N/A Year.N/A Condition.Used.
4" Nomura #B-100BT-2SP, horizontal boring mill, 39" X, 53" Y, 20 HP, 1200 RPM, 78.7"x48"tbl., 26.5"spdl table
TNT Industrial | Orange, CA
Category: Boring Mills, Horizontal, Table Type
Seller: TNT Industrial
Location: Orange, CA
Mfr: Nomura
Model: B-100BT-2SP
Y-Vert Tvl of Head 53". Table-W 78.7". RPM 1,200 RPM. Power 20 hp..
4" Emco, self centering, 3-Jaw, #5MT shank lathe chuck, non-rotating (YMC)
T & S Tool & Supply Co Inc | Holland, OH
Category: Lathe Chucks
Seller: T & S Tool & Supply Co Inc
Location: HOLLAND, OH
Mfr: Emco
This is a very unique USED Emco 4" 3-Jaw self-centering universal lathe chuck with solid one-piece jaws and a #5 Morse Taper Shank. It is in excellent condition and is non-rotating type chuck. You would use this on fixtures on milling machines or drill presses, like rotary tables. DOES NOT INCLUDE THE CHUCK KEY! We ...more
