Buy or Sell Your 10 Foot Power Squaring Mechanical Shears

Shearing Capacity, Nominal: 12' x 5/8", Shearing Capacity, Maximum: 12' x 3/4", Distance Between Housings: 147", Rake Angle, Nominal: 1/2", Rake Angle, Maximum: 3/4", Depth of Throat: 18", Holddown Pressure: 41 Tons, Speeds: Advance - 135 IPM, Return - 290 IPM, Cutting Rate, Full-Length Stroke: 12 SPM, Cutting ...more

Make: Rowe / Herr Voss, Material Width: 12" - 60", Material Thickness:.020" -.135", Weight Capacity: 40,000Lb, Coil ID: 20", Coil OD: 72", Sheet Max Length :16', Direction: Left to Right, Entry Coil Car, Floor Standing V-Type Design, Powered Lift & Traverse, Control Panel, Mandrel Uncoiler, 4-Leaf Mandrel, Powered ...more

SERIAL. P13-1153, MODEL. 1252, CAPACITY (MILD STEEL). 12 GAUGE, CUTTING LENGTH. 48" MAXIMUM, RAKE ANGLE. 5/16", NUMBER OF HOLD DOWNS. 8, BACK GAUGE RANGE. 36", STROKES PER MINUTE. 60, BACK GAUGE. REAR OPERATED MANUAL, CLUTCH. AIR TRIP MECHANICAL, SQUARING ARM. YES, FRONT ARM SUPPORTS. 1, ONE SHOT LUBE SYSTEM. YES ...more

Maximum cutting length 126" (3200mm), Maximum shearing capacity, mild steel 1/4" (6mm), Throat depth 5.9" (150mm), Number of strokes per minute 14, Backguage length 24" (600mm), Number of holddowns 14, Blade rake 1 degree 30 minutes, Main motor power 15 HP (11 KW), Electrics 230/3/60 or 460/3/60, Dimensions (L x W x ...more

(1) Used 10 x 3/8 Accurshear Hydraulic Shear, Capacity Inches 3/8, Length Feet 10, Knife Size Inches 1 x 3, Knife Length Inches- 124, Number of Hold Downs 10, Hold Down Tonnage - 12, Cycles per minute Full stroke 11 / Short Stroke 40, Motor H.P. 30, Squaring Arm 8, Capacity Inches 3/8, Length Feet 10, Knife Size ...more

SERIAL. 47161, YEAR BUILT. 1992, MODEL. 1814G FSU III, "FSU" MODEL. FAST SET UP, CAPACITY. 3/16", LENGTH OF BLADES. 14'6", GAP. 4", FLOOR TO TABLE (PASSLINE). 32", FRONT SQUARING ARM. 144", FRONT ARM SHEET SUPPORTS. (2) 72", FRONT GUAGING. YES, CNC PROGRAMMABLE BACKGUAGE. 48", SINGLE,CONTINUOUS & JOGGING ...more

Make: Amada, Model: M-3060, Material Width: 10', Material Thickness: 1/4", Blade Length: 133", Number of Hold - Downs: 13, Strokes Per Minute: 60, Front Operating Back Gauge, Squaring Arm, Motor: 15HP 230/60 V/Hz, Dimensions: 15' x 7' x 6', Weight (approx): 18,000 lbs.

MODEL. 2H10 CENTURY CAPACITY. 10' X 1/4" MILD STEEL CAPACITY STAINLESS. 10' X 3/16" LENGTH OF BLADES. 10'6" HOLDDOWNS. 11X HYDRUALIC POWER BACKGAUGE. 36" FRONT OPERATED & READOUT SPEED. 16 SPM, FULL LENGTH CUTS ELECTRIC FOOT TRIP. YES ADJUSTABLE STROKE. YES CONTROL. INCH - SINGLE STROKE MOTOR. 15 HP.

1000 TON AMD MDL #1000-3030 BAR SHEAR W/ ENTRY TABLE, MANUFACTURER - ADVANCED MACHINE DESIGN COMPANY, MODEL - 1000-3030, MACHINE NUMBER - 7412, TONNAGE - 1000, ROUND CAPACITY - 7 1/8" (1020 STEEL), SQUARE CAPACITY - 6 1/4" (1020 STEEL), ROUND CAPACITY - 5 5/8" (8620 STEEL), SQUARE CAPACITY - 5" (8620 STEEL), ROUND ...more

MODEL.: 6A, TONNAGE.: 105 TON-60,000 TENSILE MATERIAL, MAX DIA. THRU THICKNESS.: 1-5/16" - 1" THICK, PUNCH THROAT DEPTH.: 25", SHEARING:, FLATS.: 1/2" X 21", 3/4" X 10-1/2", ROUNDS.: 2-1/4", SQUARES.: 2", ANGLES.: 90 DEGREE, 6" X 6" X 1/2", ANGLES.: 45 DEGREE, 5" X 5" X 3/8", SHEAR END COPING:, SQUARE NOTCH.: 2-1/2" X ...more

The CINCINNATI 1810G Power Squaring Shears is a used industrial-grade hydraulic shear designed for high-precision sheet metal cutting. Built by one of the most respected names in metal fabrication, this machine offers robust capacity and reliable performance for high-throughput operations. The 1810G model is ...more

Capacity (to Mild Steel) 10 ga." x 10' Capacity (to Stainless Steel) 12 ga." x 10' Shearing Tons Available 36 Shipping Height 95 inches Width 152 inches Depth 87 inches Number of Hold Down Cyclinders 11 Bore of Hold Down Cylinders 2 inches Hold Down Tons of Force 20 Blade Size 1" x 3" Weight 18000 pounds ...more

Sheet Thickness 1/4" Sheet Width 10' Rake Angle (Adjustable) 1 Degree 45" - 30" Horsepower 15 H.P. Table Height 35.43" Stroke Per Minute 3,100mm Per Minute Hold Downs 15 Back Gauge Range 39" Voltage 220/440v, 3 Phase Dimensions (L x D x H) 147" x 64.56" x 86.6" WEIGHT 14,500 LBS. s Foot Pedal Quick Rake Angle ...more

Pre Owned Cincinnati Model 5000 FSU Hydraulic Power Squaring Shear, New 2000, Capacity (Mild Steel) 1/2”, Maximum Shearing Length 122 3/4”, Back Gauge Range (Front Operated Power, High Speed) 48” @ 120 I.P.M, Number of Hold Downs 13, Distance Under Hold Downs 1”, Strokes Per Minute 19-53, Main ...more

SERIAL. 1140-8-79, MODEL. MM 90C, YEAR OF MANUFACTURE. 1979, CAPACITY. 86 TON, PUNCHING. 1-1/16" THROUGH 1" MILD STEEL, FLAT BAR SHEAR. 6" X 1" TO 22" X 3/16", SQUARE SHEAR. 1-1/4", ROUND SHEAR. 1-3/8", ANGLE SHEAR. 4" X 4" X 3/8" TO 3" X 3" X 1/2", COPPER. 3" X 3" X 3/8" FLAT.

Sheet Size 157 inches Shearing Capacity 1/4 Mild Steel @ 65,000 PSI UTS / 1/8 Stainless Steel @ 95,000 PSI UTS / (Must consider option for Cr12MoV blades.) Shear Angle 1 30 feet No Load Strokes 10 Throat Depth 4.7 inches Adjustment Range of Back Gauge 0.75 - 36 Hydraulic Oil Capacity 66 Gal. Main Motor 15 HP, 220 or ...more

1/4″ x 10 ft. cap. Mild steelOptions or Upgrades, 36’’ power backgauge.

Product Hill Acme #6A Metalworker, Serial#996A-156-01, 105 Ton Punching—60,000 Tensile Material, Max. Dia. Thru Thickness— 1 5/6″ Thru1″ Tk., Punch Throat Dept- 25″, Shearing, -Flats— 1/2″ x 21″, 3/4″ x 10 1/2″, -Rounds— 2 1/4″, -Squares— ...more

Hydraulic Still Underpower, 24'1-1/4".

CUTTING LENGTH --------------------------, 10 ft, CAPACITY --------------------------------, 10 GA, WITH BACKGAUGE:FOOT PEDAL SUBJECT TO VERIFICATIONDELIVERY: IMMEDIATE, SUBJECT TO PRIOR SALE.

SERIAL. P28-313, MODEL. 1225, YEAR. 1975, CAPACITY. 1/4" MILD STEEL, OVERALL LENGTH OF BLADES. 146", STROKES PER MINUTE. 55, FRONT OPERATED POWER BACKGAUGES. 36", RAKE. 3/8" PER FOOT, ELECTRIC FOOT PEDAL. YES, FRONT ARM SUPPORTS. (2) @ 24", LUBE SYSTEM. YES, MOTOR. 15 HORSEPOWER.

Manufacturer: Butech, Line Direction: Right to Left, Materials: Cold Rolled & Hot Rolled Steel (Pickled or Black), Coil Width: 72" (1829 mm) Max., Strip Thickness:.500" (12.70 mm) Max.,.054" (1.37 mm) Min., Shear Blade Configuration: Single Rake Design, The high-speed hydraulic shear can be utilized as a ...more

PUNCH MODEL. 16, CAPACITY ROUNDS. 1/16" TO 9/16", CAPACITY SQUARES. 1/8" TO 3/8", DEPTH OF THROAT. 3-1/4", SHEARS. 2, SHEAR BLADES LENGTH. 8".

Capacity: 3/8" Length: 10’ Motor: 30 HP Power Back Gauge: 36” Voltage: 230/460 Approximate Dimensions: 149” X 89” X 91” Approximate Weight: 28,000 LBS, INCLUDES: Accushear SC-2 CNC Controller with Pre-Select Positions, Sequential Single Step, Go-To-Positions Function, Programmable ...more

Adira 10′ x 1/4″ Hydraulic Squaring Shear, GHS-0630, Inventory # 9963, Model: GHS-0630, S/N: 4232/11007D, Capacity:, Mild Steel: 10′ x 1/4″, Stainless Steel: 10′ x 3/16″, Cutting Length: 120″ (10′), Throat Depth: 13″, Rake Angle Upper Blade: 1 1/3″, Number of ...more

-BACK GAUGE 48"- CINCINNATI INC model 2500 CNC & Metalworking Equipment, used and ready for your industrial needs. Ideal for those seeking reliable capabilities from a trusted manufacturer in the field., CINCINNATI INC 2500X10.

Year: 1981, Make: Wysong, Model: 1238, Max Gauge: 3/8", Cutting Length: 144", Stroked Per Minute: 50spm, Weight: 37,000lbs, Dimensions: 80" x 240" x 72"H, (2) Support Arm, Squaring arm, Front Operated Power Backgauge, Foot Pedal, **Personal inspection of all equipment is highly encouraged** ...more

, Manufacturer: Cincinnati, Capacity: 1/2”, Cutting Length: 144”, Front Operated Power Backgauge: 48”, Right-Hand Squaring Arm, T-Slotted Front Supports, Electricals: 460 V, 36.5 AMPS, 60 Hz.

90 Ton Hydraulic Ironworker with Complete Punching Attachment with split dovetail mounting 5 Punch and Die sets Automatic Urethane Hold Down on the Punch Stripper and on Angle Plate and Bar Shear., Punching (90 Tons): 1-1/8” Diameter Through 1” Plate, Throat Depth: 10”, Bending (Optional): 12” ...more

Amada M3060 Power Squaring Shear w/Programmable Back Gauge, S/N 30601111, Year: 1998, Capacity: 3060mm/120.47", Thickness: 6mm/0.236", Stroke: 60 SPM, Motor: 15 HP, Electrics: 460/3/60, FLA 11.4 KVA, Programmable back gauge, Conveyor.

1- USED WYSONG MODEL 1652, 16 GAUGE X 4' MECHANICAL SHEAR.

Stock #: 211240003, Location: IL, Brand: Cincinnati, Model: 500 x 10' 1/2 Hydraulic Shear W/ Back Gauge, Serial #: 48632, Year: 1995, Cut Capacity: 1/2", Max Cutting Length: 10', Back Gauge Range: 48", Number of Hold Downs: 13, Additional Info, Can be inspected upon request, Stock #: 211240003Location: ...more

Pre Owned Cincinnati Century 2H10 Hydraulic Shear, Capacity (Mild Steel) 1/4”, Maximum Shearing Length 120, Rake Taper at Max Rake 3/8” Per Foot, Back Gage Range (Increased Speed) 36”, Distance Under Hold Downs 1/2”, Strokes Per Minute 14, Motor Horsepower 15, Blade Size 1” X 3” ...more

SERIAL. 1034MODEL. 625010YEAR NEW. 1990CAPACITY. 10'CAPACITY (MILD STEEL). 1/4"CUTTING LENGTH. 10' MAXRAKE ANGLE. 5/16"NUMBER OF HOLD DOWNS. 16BACK GAUGE RANGE. 36"STROKES PER MINUTE. 23 FULL/ 48 SHORTBACK GAGUE. FRONT OPERATED PROGRAMABLE POWERSQUARING ARM. YESFRONT MATERIAL SUPPORT. 2LENGTH OF STROKE ...more

NEW GEKA BENICROP 50 HYDRAULIC IRONWORKER FEATURING A BUILT-IN BENDING SYSTEM, The Bendicrop 50, part of Geka’s Bendicrop Series of hydraulic ironworking machines, s a single cylinder and six workstations. The six workstations include a built-in bending station that makes the Bendicrop machines unique in the ...more

SERIAL.: P34-117, MODEL.: 650, YEAR NEW.: 1979, CAPACITY.:.500" MILD STEEL, LENGTH.: 72", # OF HYDRAULIC HOLD DOWNS.: 10, STROKES PER MINUTE.: 60, Machine Type.Shears, Mechanical Manufacturer.WYSONG Model.650 Year.1979 Condition.Used.

Maximum shearing capacity, mild steel 16 gauge / 1,6mm Maximum shearing capacity, stainless steel 20 gauge / 1,0mm Maximum cutting length 52-1/4 in. / 1327mm Back gauge range 30 in. / 762mm Front gauge range 37 in. / 940 mm Floor space, gauges in position 60 x 80 in. / 1524 x 2032 mm Overall dimensions, less gauges ...more

, Manufacturer: Cincinnati, Model Number: 2512G, Serial Number: 56811, Year: 2019, Stock Number: 14042, s:, Operator control stand, Foot pedal control, 36" power operated back gauge, 13' squaring arm, Ball transfers in table, Finger guard, Cutting length: 12', Maximum thickness capacity: 3/8", Length of ...more

4' X 10 GAUGE POWER SQUARING SHEAR, UNDER POWER & RUNNING.

Make: Mubia, Model: 1000, Year: 1900, Machine Location: Alberta, Canada, Dual-operator hydraulic ironworker – work two stations simultaneously, Heavy-duty 110-ton punching capacity, Plate shear: up to 7/8″ mild steel (22 mm), Angle shear: 6″ x 6″ x 5/8″ at 90°, Notcher: up to ...more

MODEL: 650, YEAR NEW: 1979, CAPACITY:.500" MILD STEEL, LENGTH: 72", # OF HYDRAULIC HOLD DOWNS: 10, STROKES PER MINUTE: 60.

Capacity (to Mild Steel) 1.25" x 10' Shearing Tons Available 350 Rake (In Inches per Foot).75 Shipping Height 136 inches Width 164 inches Depth 98 inches Number of Hold Down Cyclinders 11 Bore of Hold Down Cylinders 5 inches Hold Down Tons of Force 330 Blade Size 1.5" x 5.5" Weight 100000 pounds Horsepower 75 ...more

Capacity 49 tons Punch Capacity 3/16 Thru 3/4 Flat Bar Shear Capacity 3/16 x 22, 3/4 x 9 Angle Shear Capacity 4 x 4 x 3/8, 3 x 3 x1/2 Round Bar Shear Capacity 1.375 inches Square Bar Shear Capacity 1.25 inches Approx. Shipping Dimensions 75 L x 48 W x 72 H Approx. Shipping Weight 3000 pounds.