Buy or Sell Your 10 Foot Power Squaring Mechanical Shears

Used 0.75 cu ft Baker Perkins double cone vacuum dryer, stainless steel product contact surfaces, approximately 16" diameter x 5" straight side with 10" cones inside dimensions, rated 20 psi and full vacuum internal, jacketed for 20 psi, 6" inlet with cover, 6" outlet with butterfly valve, on stand with 2 hp, 230/460 ...more

41" x 63" Cutting Chamber, Mechanical Drive, 200HP 3/60/460v Electric Motor, Shock Load Protection, Auto-Reverse, Feed Hopper & Stand Mounted.

Make: Haco, Model: HSLX3006, Year: 2001, Machine Location: Tennessee, Manufacturer: HACO, Model: HSLX3006, Year: 2001, Condition: Used – Good condition, Maximum Cutting Capacity:, – Mild Steel: 1/4″ (6mm), – Stainless Steel: ~3/16″ (4mm) (verify if applicable), – Maximum Cutting ...more

Standard s:, Taiwan machinesISO 9001 certifiedHD all steel construction for maximum rigidityGerman logic quiet Rexroth hydraulic systemAdjustable stroke from 16-20 strokes per minute60” long squaring arm with inch / mm scaleSpring hold-downs High grade carbon/chrome alloy steel blades and hardened to 62 HRC ...more

Tonnage 88 Ton Shearing Power 150 Ton Shears. Flat Bar (with slight deformation) 18" x 5/8" or 12" x 3/4" Length Of Blade 18-11/16" Work Height 33-1/2" C-Shears. L at 90 Degrees without Deformation 5-1/8" x 5-1/8" x 1/2" L at 45 Degrees 2-3/4" x 2-3/4" x 1/4" Solid Bar. Round Bar 1-3/4" Square Bar 1-3/4" Notching. ...more

Capacity: 2000 TonStroke: 11.8"Shut Height: 43.3"Pressing Speed: 20 SPMIdling Speed: 60 SPMBottom Ram Size: 44.1" x 54.7"Main Wedge Top Surface: 40.9" x 55.3"Main Wedge Adjustment: 0.5"Mechanical Upper Ejector (Ram) Capacity: 10 TonMechanical Upper Ejector (Ram) Stroke: 1.2"Hydraulic Lot Ejector (Table) Capacity: 25 ...more

Cincinnati Stacker, Capacity: 48" W x 10 Ft Long, -Mounted to back of Shear, -Skate Roll Supports, -Bombay Drop Type, -Side Discharge, -Powered End Stop, -Exit Conveyor, -Installed.

Cutting capacity:, Mild steel 10 x 10 Ga., Stainless steel 10 x 14 Ga., soft aluminum 10' x 1/4", min. thickness 24Ga., Blade length 10'1", Strokes per minute 10-15, Worktable height 34 1/2", Front support arm 24", Back gauge 36" SIKO powered B.G., Blade rake angle 2 degree, Oil tank cap. 26 Gal, Main Motor 7 ...more

Used 3" Viking rotary gear pump, model LL123, carbon steel construction, nominally rated 140 gpm at 520 rpm rotor speed, mechanical seal on base with 7.5 hp xp motor, serial# 10347766.

10 Gauge x 10’ Mechanical Squaring Shear with 24” Front Operated Power Back Gauge, 7.5 HP, Jaw Clutch and Friction Brake, Automatic Pressure Lubrication, Non Float Inclined Ram, 40 SPM and Foot Treadle, Capacity: 10 GaugeDistance Between Housings: 10’3”Back Gauge Range: 0-36”Back Gauge ...more

, Punch holddown gauging table on punch end, Head controls, Manufacturer Metal Muncher 49 Ton Ironworker Model MM49 Year 1986 Condition Used Serial Number 256986 Stock Number 11011 Punch capacity 49 ton Throat depth 10" Bed size 9" x 18" Length of shear blades 16" Angle capacity 4" x 4" x ...more

1979 IRONCRAFTER 41/41, RATED CAPACITY. 40 T, ANGLE AT 90 DEGREES. 3", NUMBER OF OPERATING STATIONS. 2, SHEAR. 5/8" x 6", ROUND. 1", TONNAGE SHEAR. 40 T, TONNAGE PUNCH. 40 T, THROAT DEPTH. 10", MAX DIAMETER OF PUNCH. 1.25", MAX LENGTH OF STROKE. 2", OIL CAPACITY. 18 gal, Dimensions. 52" X 42" X 70", Weight. 2200 LBS ...more

SERIAL. SB5096H, MODEL. 00-H, YEAR NEW. 1984, CAPACITY ROUNDS. 1-1/2", CAPACITY SQUARES. 1-1/2, CAPACITY REBAR. (1) #11 RE BAR, CAPACITY FLATS. 3/8" X 10", MAXIMUM KNIFE OPENING. 5-1/4", LENGTH OF BLADES. 10", WIDTH OF BLADES. 3-7/8", THICKNESS OF BLADES. 7/8", STROKE PER MINUTE. 16 AT FULL OPENING, STROKE PER MINUTE. ...more

CAPACITY: CAPACITY (MILD STEEL) 10 GA. X 14' STROKES PER MINUTE 18-90 NUMBER OF HOLDOWNS 15 BACK GAUGE RANGE 24" MAIN MOTOR 15 HP APPROXIMATE DIMENSIONS 185" X 98" X 106" APPROXIMATE SHIPPING WEIGHT 22,000 LBS, FRONT OPERATED POWER BACK GAUGE SHADOWLINE VARIABLE RAKE ANGLE (PUSH BUTTON) VARIABLE CUT LENGTH (PUSH ...more

Haco 13’3” x 5/8” Hydraulic Shear, Model HSL 4016, Serial # 68478, Asset # 13111, Capacity Mild Steel 5/8”, Capacity Stainless Steel 5/16”, Cutting Length 13’ 3”, Angle Adjustment 0.5-3 Degrees, Number of Plate Holddowns 23, Number of Strokes – Max Angle 4/min, Number of ...more

Punching Station:, Capacity: 55 US Tons, Ø1-1/16” in ½”, Maximum Round Punch that can be held Ø1-1/4”., Optional Attachments up to 4”, Throat Depth: 6-7/8”, Working Height: 37-13/16”, Safety:, •Single Stage Foot Pedal, •Stripper Open Safety with slow ...more

2009 Cooks AC36 Sawmill, Fully Hydraulic, Log Turners/Clamps, Squaring Arms, Tapers, Rollers, Capacity - 36" x 30' long, No Motor.

UNI-HYDRO 42-14, Tonnage. 42 T, Angle (L1). 3", Angle (L2). 3", Angle (T). 0.25", Flat Bar Shear. 3/8 x 14 / x 10 / 5/8 x 6, Punch Capacity. 1-1/8 x Mild Steel, Rod Shear. 0.75", Throat. 6".

Punching Capacity 85 Tons Special Tooling 4" Max. Dia. Throat Depth 14" Flat Bar Shear 20" (45 Degree With Bar Sheer) 4" x 4" x 1/2" Brake 12" 85 Ton Brake 24" 85 Ton Pipe Notcher 3/4", 1" Schedule 40 1 - 1/4" Rectangle Notcher 2" x 4" x 1/2" 90 Degrees V-Notcher 3" x 3" x 1/2" 90 Degrees V-Notcher 3" x 3" x 1/2" ...more

SERIAL. P4-480, MODEL. P90, PUNCHING CAPACITY. 90 TONS, PUNCH DIAMETER THROUGH PLATE SIZE. 1-1/8" THRU 1", DEPTH OF THROAT. 12", LENGTH OF STROKE. 5-1/4", SHEARING CAPACITY ANGLES. 6" X 6" X 5/8", OPEN HEIGHT. 15-1/2", PLATE. 18" X 3/4" & 20" X 1/2", ROUNDS. 1/2" TO 2" MAXIMUM, SQUARE. 1/2" TO 1-3/8" MAXIMUM ...more

Geka Hydracrop 50 Ton Ironworker, Model HYD-50A, Serial # 6960, Asset # 16104, Flat Shear Capacity 12” x 5/8”, 8” x ¾”, Length of Blades 12”, Square Bar 1”, Working Height 35”, Angle Station 100 Tons, L at Right Angle 4” x 4” x 1/2”, L at 45 Degrees ...more

Used 5 liter Eiger horizontal media mill, model 5L-VSE-EXP, with jacketed chamber, mechanical shaft seal with seal pot, xp design with 10 hp, 1800 rpm, 220 volt motor, machine serial# 10165, built 2003.

Used Draiswerke Pearl Mill, model DCP-MagaVantis 15, 1 liter jacketed grinding chamber, rated 3 bar (45 psi) at 70 c (158 F) internal, jacketed for 3 bar (45 psi) at 40 c (104 f), with 10 hp, 460 volt xp main shaft motor, mechanical seal, with control panel, comm# MS-6867, serial# 29-397, built 2009.

1/4"12'1" X 3" X 148"1919204620 HP575V/3/60171"L X 110"D X 83"H21,000 LBS.

SERIAL. 866197, MODEL. 175, TYPE. XS, PUNCHING CAPACITY.175 TONS, MAXIMUM DIAMETER THRU THICKNESS. 1-1/2" X 1-1/4", DEPTH OF THROAT. 24", SHEARING CAPACITIES ANGLES @ 90 DEGREES. 8" X 8" X 3/4", ANGLES @ 45 DEGREES. 3" X 3" X 3/8", ROUNDS. 2-1/2", SQUARES. 2-1/8", BLADE LENGTH. 25", FLATS. 24 X 3/4" X 15"X 1-1/4" ...more

Stock #: 191240002, Location: Norkfolk, VA, Brand: Durma, Model: VS 3006, Serial #: 891109772, Year: 2009, Approx. Shipping Weight: 16,000 Lbs., Approx. Shipping Dimensions: 166" L x 86" W x 80" H, Cutting Length: 122", Cutting Capacity (Mild Steel): 1/4", Cutting Capacity (Stainless Steel): ...more

Used Tri Clover Sanitary Centrifugal Pump, Model C218MD25T-S, stainless steel construction, 3" X 1" X 8" impeller, mechanical seal, 20 HP 230/460 Volt motor, on base, Serial #232678-01.

Punching Station:, Capacity: 120 US Tons Ø1-1/2” in 3/4” or Ø 1-1/4” in 1” Maximum Round Punch that can be held Ø1-9/16”. Optional Attachments up to 4” Throat Depth: 24” Working Height: 45-1/2” Safety: • 2 Stage foot pedal with low pressure on ...more

Vertical Arm Movement 27 1/4" Column To Spindle 9 1/2" - 50" Type Hydraulic Blade Size 1" x 4" x 148" Ram Speed: Down 259"/min Ram Speed: Up 450"/min Rake Angle 1/2" Strokes Per MInute 17 - 50 Back Gauge Range 48" Number Of Hold Downs ((Hydraulic) 15 Holddown Tonnage 23.8 Horsepower 40 H.P. Voltage 460V ~ 3 Phase ...more

Used Tri Clover Sanitary Centrifugal Pump, stainless steel construction, 1" x 1" x 4" impeller, mechanical seal, 1.5 H.P. drive, 208-230/460 volt, 3450 RPM, missing outer housing.

, Durco Stainless Steel pump 3x1.5x10. Mechanical seal. Driven by 7.5 HP, 575 V, WEG Motor., DURCO 3196, GPM. 0, Type. Centrifugal, Horz/Vert. H, Size. 3X1.5x10, Material. D-100.

Punching Capacity 150 Ton I 1 - 1/2" In 1 - 1/4" Special Tooling 4" Max. Dia. Throat Depth 12" Flat Bar Shear 24" (Sabre Blade - Std.) 1" x 14" Angle Shear 90 Degrees 6" x 6" x 1/2" Angle Shear 45 Degrees (With Bar Shear) 3" x 3" x 3/8" Brake 12" 75 Ton Brake 24" 55 Ton Open End Brake Max. 1/4" x 6" Pipe Notcher 3/4" ...more

, Punch Rating 125 Ton, Punch Capacity 1-9/16" thru 1" A36, Notcher Capacity 3" x 3" x 3/8", Throat Depth 9", Flat Bar Shear 24" x 1/4", S:, Punching Station, Press Brake Station, Flat Shear Station, Coper/Notcher Station, Electrics: 7.5 HP, 230 Volt, 3 Phase, Approx. Dims: 42" x 62" x 69" (l x w x h), Approx. Weight: ...more

Pre Owned Geka Hydracrop 110 A Hydraulic Ironworker, Punching Capacity 120 Tons, Punch Throat 12”, Bar Shear 2” Dia Max, Plate Shear 24” X 5/8”, Angle Shear 6” X 6” X 1/2” Max, Bending 120 Tons, Hydraulic Unit 3HP 12 Gal, Dual Electric Foot Switch, Dual Cylinders., Approximate ...more

SKU: 142972, Condition: New, Electrical :, Voltage: 230 volts, Phase: 3-phase, Tons: 55 ton, Dimensions: 62.00 (H) x 51.00 (W) x 45.00 (L) inches, Additional :, Amps: 14, Angle Shear Max Capacity 1/4": 4 x 4, Angle Shear Work Height: 39-7/8", Flat Bar Shear Max Capacity 1/2": 12, Flat Bar Shear Max ...more

Cincinnati 10’ x ¼” Hydraulic Shear, Model 2500HS x 10, Serial # 46371, Asset # 15006, Capacity, Mild Steel ¼”, Cutting Length 122.75”, Max. Rake, IN/FT 3/8”, Hold Down Tonnage 8.5, Number of Hold Downs 12, Distance Under Hold Down ½”, Distance Under Guard ...more

Complete Good Running Engine Perkins 1004-40tw Diesel, Turbocharged, Aftercooled, Build Code Am50611, 122 Hp At 2600 Rpm Rating, Same As Some Cat 3054ta Engines, Mechanical Fuel System. Exchange Plus $1,000.00 Refundable Core Deposit. Starting At $11,995.00 Test Run Video Available. No Smoke Or Blowby Observed, Runs ...more

Catalog - Subject to Verification By Buyer, Punch Station, Capacity: 70 Ton, Throat Depth: 15, Open Height (Less Tooling): 11 3/4, Shut Height (Less Tooling): 7 3/4, Stroke: 4, Stroke Rate: 60 1/2 Inch Strokes / Minute, Maximum Material Thickness: 11/16, Maximum Hole Diamtere @ Max. Thickness: 1 1/4, Punch Style: M40 ...more

Manufacturer: Butech, Year: 2000, Model: MS-625-78, Material to Cut: HR, HRP&O, Steel, Thickness:.625" Max.,.060" Min., Strip Width: 76" Max, 24" Min., Shear Strength: 80,000 PSI Max. Up To.500" ; 50,000 PSI Max. Over.500", Line Direction: Right to Left, Shear Style: Mechanical Downcut (Single Rake), Drive: 100 ...more

SERAL. PII-140-173, MODEL. PII 140, PUNCHING CAPACITY. 140 TONS, PUNCH DIAMETER THROUGH PLATE SIZE. 1-3/8" THRU 1-1/4", DEPTH OF THROAT. 20-1/2", STROKE. 5-1/4", OPEN HEIGHT. 15-1/2", PLATEN TABLE. 21" X 14-1/2", SHEARING CAPACITY ANGLES. 6" X 6" X 5/8", PLATE. 20" X 1/2", PLATE CAPACITY. 14" X 1", ROUNDS. 1/2" TO 2" ...more

"L" Type Coil Car:, 52" Wide Deck, 40" Centerline of "V" to side mast allowing for an 80" OD Coil, 9" Dia. x 27" Long Lift Cylinder Body, Approx. 15" from floor to bottom of "V" Cradle, Self-Contained Hydraulic Power Unit, -Delta Cone Type Uncoiler:, Solid Non-Expanding Mandrels, Sliding Bases, Wichita Brakes on both ...more

SKU: 142970, Model: ED9-IW55-3P230, Condition: New, Electrical :, Voltage: 230 volts, Phase: 3-phase, Tons: 55 ton, Dimensions: 62.00 (H) x 51.00 (W) x 45.00 (L) inches, Additional :, Amps: 14, Angle Shear Max Capacity 1/4": 4 x 4, Angle Shear Work Height: 39-7/8", Flat Bar Shear Max Capacity 1/2": 12 ...more

EDWARDS (USED) MODEL E120J5 120 TON IRONWORKER, 120 TON RATED CAPACITY, 11" THROAT, 9-1/8" OPEN HEIGHT, 7-1/8" SHUT HEIGHT, 2" STROKE, 10 HP, 3 PHASE, 480 VOLTS, PUNCHING CAPACITY, - 1-1/2" DIAMETER IN 1" PLATE, FLAT BAR SHEAR, - 1/2" X 24" MAXIMUM WIDTH, - 1" X 12" ...more

Overview, Type:IronworkersManufacturer:ENERGY MISSIONModel:BMT EM Ironworker-50Condition:New - Build-To-OrderYear:2024Status:For Sale, Sheet metal 6x.6", Sheet metal 9.8x.4", Blade Length 12.75", Shearing with angle 4x4x.4", Working height 34", NOTCHING, Thickness.24", Width 1.8" ...more

, Manufacturer: Herr-Voss, Year of Manufacturer: 1997, Width Capacity: 24" Min. - 75" Max, Gauge Range:.090" Min. -.250" Max, Shear Strength: 65,000 PSI Max, Please Note: it is missing the flywheel, clutch and brake, *Currently Removed and In Storage.

Cummins 6CTA (8.3 L) – 260 HP Open Power Unit, Our 6CT 8.3 L engines are considered reman component builds with roughly 90% OEM Surplus and 10% Aftermarket Parts. We offer these units up to 300 HP for both automotive and industrial applications alike. This open power unit is rated at 260 HP and is perfect for ...more

Surplus 400 GPM @ 80 PSI 25HP TONKAFLO Pump Model AS40603KZC, 30HP, T, S/N 05160032, Mechanical seal 1.00, T21,028F1C1., Shipping info: One skid, 71" L x 29" W x 23" H., Weight = 681 LBS., Performance Curve on file.

Standard s:, ISO 9001 certifiedAmerican design and Taiwan quality machineHD all steel construction for maximum rigidityPrecision driven gearboxFull length 30 strokes per minute60” long squaring arm with inch / mm scalespring hold-downs high grade carbon/chrome alloy steel blades and hardened to 62 hrc,2-edge ...more