Machinery Solutions Inc
Lexington, SC 29071-0130
Platinum Level Dealer
Surplus Record Dealer Since 1999
Contact
Jason A.
About
Machinery Solutions, Inc. was established in 1981. We have grown into a major supplier of new machine tools in the Carolinas and a national supplier of reconditioned machine tools. MSI maintains around 300 used machine tools in stock.Products & Services
- Boring Mills, Horz. & Vert.
- CNC Machinery
- Drills
- Furnaces & Ovens
- Grinders
- Lathes
- Rebuilding/Retrofitting
- Saws
Associations & Affiliations
133 listings in 66 categories
60 Hz Single Phase Transformers
1 Result
150 KVA 440 Primary,, Roman-Kirkhof M44150LS625X, Transformer, 1 Phase, 60 Hz, Remanufactured 2005
Category: 60 Hz Single Phase Transformers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Roman-Kirkhof
ROMAN MFG #M44150LS625X, Transformer Stock# UD64540No additional, please call.
60 Hz Three Phase Transformers
3 Results
30 KVA 480 Pri 208Y/120 Secondary, Cutler Hammer V48M28T30, Transformer, 3 Phase, 15" W x 20" L x 30" H
Category: 60 Hz Three Phase Transformers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Cutler Hammer
Cutler Hammer V48M28T30, 30 KVA, 480 delta-208Y/120 Volt Secondary, 3 Phase Stock# UD100263: Height: 30 Width: 15 Length/Depth: 20 Weight: 250 lbs.
65 KVA 218.5-483 Primary, 208 Secondary, Makino ST3361, Specialty Transformer, EI-8530.00
Category: 60 Hz Three Phase Transformers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Makino
Makino ST3361, Specialty Transformer, EI-8530.00, Input 218.5, 230, 241.5, 437, 448.5, 460, 471.5, 483 volt with output to 208 volt Stock# UD100125No additional, please call.
75 KVA 480 Primary, 208Y/120 Secondary, GS #T2H75, Gs Electric Transformer, 3 Phase, 18" W x 14" L x 14" H
Category: 60 Hz Three Phase Transformers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Gs
GS #T2H75, Hevi-Duty Electric 75 KVA, 480V ? 208Y/120 Secondary, 3 Phase Stock# UD100266: Height: 14" Width: 18" Length/Depth: 14" Weight: 200 lbs.
FMB #Turbo-5-42/4200, 12' magazine barfeed, 5-42mm, collets, S/N 37-110-270, #UD1000
Category: Bar Feeders and Loaders
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Fmb
Model: TURBO-5-42/4200
LNS #3.12HS-48, barfeed, 6 tubes, 1/4" to 1-1/2", s/n 39323-97
Category: Bar Feeders and Loaders
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Lns
Model: 3.12HS-48
LNS #6.42HS-5.2, barfeed, 3 tubes, 1/16" to 5/8", s/n 34515-92 (from Citizen)
Category: Bar Feeders and Loaders
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Lns
Model: 6.42HS-5.2
LNS #Quick-Load-Servo-QL-MOVE-S2, Bar Feed, serial #211252-2012, 2012
Category: Bar Feeders and Loaders
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Lns
Model: QUICK-LOAD-SERVO-QL-MOVE-S2
Year: 2012
Diameter: 1/4" - 3.150" (6-80 mm) Bar length: 14" - 63" (350 - 1600 mm) - Not to exceed headstock spindle length Chain loading rack magazine holds 16 pieces Maximum bar weight: 150 lbs. Maximum table load: 1,100 lbs. Pushing force: 125 ft-lb Loading system: Side load rack Loading capacity: 26" (650 mm) Loading: ...more
LNS #Quick-Six-Move-S2, Bar Feeder, w/0.5"-2.4" Spindle Liners, 0.25"-3.15" diameter x 14"-63" L Bar, 26" Loading capacity, 200-480 V., 2012
Category: Bar Feeders and Loaders
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Lns
Model: QUICK-SIX-MOVE-S2
Year: 2012
Diameter: 1/4" - 3.150" (6-80 mm) Bar length: 14" - 63" (350 - 1600 mm) - Not to exceed headstock spindle length Chain loading rack magazine holds 16 pieces Maximum bar weight: 150 lbs. Maximum table load: 1,100 lbs. Pushing force: 125 ft-lb Loading system: Side load rack Loading capacity: 26" (650 mm) Loading: ...more
3" x 32" Dayton, Belt Sander, for engine lathe, 1 HP, 115/220 V
Category: Belt Sanders
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Dayton
Dayton 3" x 32: belt sander for engine lathe, S/N 8479-58 Stock# UD100471: Belt size: 3" x 32" Horsepower: 1 HP Electrics: 115/220/1/60.
Booth and Cabinet Blast Cleaning and Shot Peening
1 Result
18" x 14" x 10" Central Pneumatic #01672, Bead Blast Cabinet, Poly Vinyl Cabinet, 3/8" Hose, 1/4" NPT Air Inlet, 14" x 22" Window, 80 psi, 5 CFM, 115 V
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Central
Model: 1672
Air pressure: 80 PSI Air consumptions: 5 cfm Hose size: 3/8" Air inlet: 1/4" NPT Work cabinet dimensions (d x w x h): 14" x 18" x 10" Cabinet Construction: Poly vinyl Cabinet Window: 14" x 22" Gloves: Rubber Electrics: 115/1/60.
18" width x 20" H x 20" D Gruenberg #B65C-46, industrial batch oven, 800°F,s/n #5386
Category: Cabinet Type Ovens
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Gruenberg
Model: B65C-46
Overall dimensions: 43"(W) x 42"(D) x 32"(H) Inside Dimensions: 20"(W) x 18"(D) x 20"(H) Maximum Temperature: 800 deg Blower motor: 1/4 HP Electrics: 220V/3P/60.
26" width x 50" H x 38" L Precision Quincy #54B-1000, 1000°, gas fired, hi-temp, s/n 12523, 1998 in process of reconditioning controls
Category: Cabinet Type Ovens
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Precision Quincy
Model: 54B-1000
Year: 1998
Max temperature: 1,000 (F) / 538 (C) Interior chamber dimensions (W x D x H): 26" x 39" x 50" Number of doors: 1 Eclipse Junior Burner System 236 JIB-S capacity: 1,000,000 BTU/HR Re circulation fan: 0.75 HP Electric amps @ full load: 4.4 Amps Electric service: 460V/3Ph/ 60H External chamber dimensions (W x H x D): 42" ...more
Koolant Koolers #HCC200P, Chiller, 24000 BTU, 2 HP Compressor, 0.5 HP Pump, 230 V., S/N 3083, 1984
Category: Chillers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Koolant Koolers
Model: HCC200P
Year: 1984
Copeland condensing unit : F3AD 0201 CFV Copeland compressor : CRD1 0200 PFV BTU : 24,000 Compressor : 2 HP Electrics : 230v/1ph/60cy Weight approximately : 300 lbs.
CNC Drilling and Tapping Centers
3 Results
Brother #TC-22B, CNC B00,17.7" x19.7", #30,16000 RPM, 2755 IPM, 27 ATC, thru spindle coolant, HPP coolant, chip conveyor, S/N 111463
Category: CNC Drilling and Tapping Centers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Brother
Model: TC-22B
TRAVEL: X-axis: 19.7" Y-axis: 17.7" Z-axis: 16.1" Distance between table top to spindle nose: 26" TABLE : Work area size: 25.6" x 17.7" Maximum loading capacity: 551 lbs. Table surface: T slotted SPINDLE: Spindle speed IPM motor: 16 - 16,000 RPM Tapping speed: 8,000 RPM Spindle taper: 7/24, #30 Taper FEED RATE: Rapid ...more
Brother #TC-32B-QT-N, Tapping Center, 21.7" X, 15.7" Y, 16.3" Z, 23.6" x 16.7" Work Area, 47.2" Turning diameter, 16000 RPM Spindle, 40+1 Tool capacity
Category: CNC Drilling and Tapping Centers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Brother
Model: TC-32B-QT-N
TRAVEL: X-axis: 19.7" Y-axis: 17.7" Z-axis: 16.1" Distance between table top to spindle nose: 26" TABLE : Work area size: 25.6" x 17.7" Maximum loading capacity: 551 lbs. Table surface: T slotted SPINDLE: Spindle speed IPM motor: 16 - 16,000 RPM Tapping speed: 8,000 RPM Spindle taper: 7/24, #30 Taper FEED RATE: Rapid ...more
Brother #TC-32BN-QT, Quick Table, CNC B00,16k RPM, #30 taper, 40 tools, thru spindle coolant, 1000 PSI Coolant, Chip Conveyor, S/N 121467, 2008
Category: CNC Drilling and Tapping Centers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Brother
Model: TC-32BN-QT
Year: 2008
TRAVEL: X-axis: 19.7" Y-axis: 17.7" Z-axis: 16.1" Distance between table top to spindle nose: 26" TABLE : Work area size: 25.6" x 17.7" Maximum loading capacity: 551 lbs. Table surface: T slotted SPINDLE: Spindle speed IPM motor: 16 - 16,000 RPM Tapping speed: 8,000 RPM Spindle taper: 7/24, #30 Taper FEED RATE: Rapid ...more
Hyundai Kia #SKT250SY, Fanuc 18iTB, 30 HP main, 10 HP sub, 3" bar, Y-Axis, live tools, parts catcher, tool setter, chip conveyor, 6,132 cut hrs., S/N SKT250SY 0008, 2006
Category: CNC Lathes and Turning Centers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Hyundai Kia
Model: SKT-250SY
Year: 2006
Capacity:, Swing over bed ...more
CNC Rotary Tables and Indexers
1 Result
Forkhardt #5C QUAD 4 position indexer, 5.875" centerline height,w/Mitsubishi drive & motor,S/N 4122-4125, 2019
Category: CNC Rotary Tables and Indexers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Forkhardt
Model: 5C4
Year: 2019
Yuasa DMNC-400, 15.75" (400mm) table diameter, High Precision, Programmable 4th Axis Rotary Table with 12" 3-Jaw Chuck and Outboard Support with 3-Jaw Chuck, 2017 Stock# UD10000: Type: Recirculating Tonnage: 3 ton BTU: 36,000-42,000 Refrigerant: R-410A Eco Friendly Full load amps: 10.5 Min circuit amps: ...more
CNC Vertical Bed Mills
1 Result
Milltronics #RH33, Rigid Head Bed Mill, 78" X, 33" Y, 28" Z, 86" x 32" Table, 35/25 HP, 8000 RPM, 24 ATC, 2011
Category: CNC Vertical Bed Mills
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Milltronics
Model: RH33
Year: 2011
EMAIL QUOTATION, STOCK #UD100604, Machinery Solutions, Inc. is pleased quote the following machine for your consideration:, (1) Milltronics RH33XP, Rigid Head, Bed Mill, Box Ways, Upgraded CNC Control, #50 Taper, 8,000, RPM, 20 Tool ATC, S/N 11492, (New 2011), Price ...more
13/16" Hardinge #3J, collet
Category: Collet Chucks
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Hardinge
Hardinge 13/16" 3J collet Stock# UT00096Call, no additional at this time.
8" Lexair-Production Dynamics #FR8-27, Full Bore Collet Chuck, A2-6 Mount, S26 Collet Pads, 0.25"-2.63" capacity Using Collet Pads, 17000 lbs. Grip Force
Category: Collet Chucks
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Lexair-Production Dynamics
Lexair - Production Dynamics #FR8-27, Full Bore 8" collet chuck, 8" chuck, S26 collet pads, 1/4" - 2-5/8" w/ collet pads or 1/4" - 2-3/4" using solid colets, A2-6 mount Stock# UD100158No additional available.
Jacobs Rubber-Flex, collet set, 0.625"-1.375" capacity, J1915, J1916, J1917, J1918, J1919, J1920, w/Storage Box
Category: Collet Chucks
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Jacobs
Jacobs Rubberflex, 5/8 - 1 3/8 inch collet set (J1915, J1916, J1917, J1918, J1919, J1920), storage box Stock# UT00055Call, no additional at this time.
Lot of 16 Used 5C Collets
Category: Collet Chucks
Seller: Machinery Solutions Inc
Location: Lexington, SC
Various manufacturers lot of 16 used 5c collets Stock# UT00117Call, no additional at this time.
Coolant Filtering Systems
2 Results
Kalcon-Molan #PCF-120, Coolant Sump Pump & Filtration Cart, 120 gallon Tank, 105 CFM, 3 HP Vacuum & 0.25 HP Discharge Pumps, 110 V
Category: Coolant Filtering Systems
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Kalcon-Molan
Model: PCF-120
Tank Capacity: 120 gallons Vacuum Pump: 3 Hp Main Pump CFM 105 CFM Discharge Pump: 1/4 HP Discharge Pump GPM: 20 GPM Electrical 110v/1phSize (L x W x H): 63" x 38" x 61" : Portable Cart with Casters Discharge Hose Suction Hose.
Mosnic #RD3C-116A, Drum Filtering & Scraper Conveyor, for Makino A51nx/A61nx, 2-Stage, 880 liter Tank, 220 V, 2021
Category: Coolant Filtering Systems
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Mosnic
Model: RD3C-116A
Year: 2021
Tank capacity: 880 liters Conveyor chain: RF 2060S 6LA2 Conveyor belt: C-1165-HW15 Conveyor links: 126 Linksx2 Filter back wash set pressure: 0.08-0.1MPa Electrics: 220/3/60 Hz Approximate dimensions (W x L x H): 50" x 111" x 72" Approximate weight: 1,500 LBS.
Ideal #13-001.5, Demagnetizer, 115 V
Category: Demagnetizers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Ideal
Model: 13-001.5
Tank Capacity: 120 gallons Vacuum Pump: 3 Hp Main Pump CFM 105 CFM Discharge Pump: 1/4 HP Discharge Pump GPM: 20 GPM Electrical 110v/1phSize (L x W x H): 63" x 38" x 61" : Portable Cart with Casters Discharge Hose Suction Hose.
Dust Collectors
2 Results
Airomax #RM2502 fume collector, free standing, dry type w/duct, s/n 1090-11766-01
Category: Dust Collectors
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Airomax
Model: RM2502
Aeromax RM RM2502, fume collector, 120/60/1, s/n 1090-11766-01 Stock# UD100402No additional available.
Torit #20.3FY, dust collector, 208 V., s/n 95476
Category: Dust Collectors
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Torit
Model: 20.3FY
Hammond polisher w/ back stand idlers, Torit dust collector, S/N 7381 Stock# UD100317No additional available.
40" x 204" LeBlond #4025NK, Engine Lathe, Servo Shift, 32"/25" 4-Jaw Chucks, 34" width x 26" D Bed, 75 HP, 5.4-600 RPM, 440 V,
Category: Engine Lathes
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Leblond
Model: 4025NK
Swing over bed ways : 40" Swing over cross slide : 25" Distance between centers (17') : 204" Bed width : 34" Bed depth : 26" Spindle mount : 11" A1 Spindle center to floor : 44" Hole thru spindle : 3.062" Spindle RPM (36 speeds) : 5.4 to 600 RPM Threads per inch : 3/4" to 46 TPI Feeds :.004" to.250" IPR Tailstock ...more
18" width x 30" D x 16" H So-Low #PR100-E, -100°C, 115 V., s/n 172167
Category: Environmental Chambers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: So-Low
Model: PR100-E
Temperature: -100 F Inside Dimensions: 18" x 36" Inside Depth Dimensions : 16" Electrics : 115/230v/1ph.
20" x 21" x 22" Standard Environmental #STB5, -121 to 372°, 230/1
Category: Environmental Chambers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Standard
Model: STB5
Forklifts
1 Result
3000 lb. Raymond #RTW30, Electric Powered Forklift Truck, Side Shift, (3) Solid Tires, 3-Stage Mast, 240" Lift height, 24" Load Center, 36 V, 1994
Category: Forklifts
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Raymond
Model: RTW30
Year: 1994
Capacity: 3,000 lbs Lift height: 240" Load center: 24" Battery volts: 36V Battery width: 20.8" Weight: 7,711 lbs.
Chatrillon #100-189, Digital Force Gauge, S/N 25190
Category: Gauges
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Chatrillon
Chatrillon #100-189, force gauge, S/N 25190, PRICE ON REQUEST Stock# UT00028No additional available.
Federal #99P12, Pistol Type ID Gauge, 0"-3", 0.0005", S/N 3405
Category: Gauges
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Federal
Federal #99P12, pistol type ID gauge 0-3",. 0005", S/N 3405, PRICE ON REQUEST Stock# UT00031No additional available.
#5, Standard bore gauge, 3.09"-6.13", 0.0001" Indicator
Category: Gauges
Seller: Machinery Solutions Inc
Location: Lexington, SC
Unknown Mfg #5, Standard bore gauge, 3-3/32" - 6-1/8",.0001" indicator, PRICE ON REQUEST Stock# UT00023No additional available.
#2, Standard Bore Gauge, 1"-1.53", 0.0001" Indicator
Category: Gauges
Seller: Machinery Solutions Inc
Location: Lexington, SC
Unknown Mfg #2, Standard bore gauge, 1" - 1-17/32",.0001" indicator, PRICE ON REQUEST Stock# UT00024No additional available.
Gun and Deep Hole Drilling Machines
1 Result
Drillmation #D-18, gun drilling machine, 1 spindle,.078-1", 18" stroke,table with X/Y fixture
Category: Gun and Deep Hole Drilling Machines
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Drillmation
Model: D-18
, Spindle stroke. 18", Drilling capacity. 1/4" - 1", Spindle speeds. Variable, Feed rate by meter. 0-12 IPM, Coolant tank capacity. 200 Gallons, Spindle motor. 6 HP 220V 3/60, Approximate dimensions (LXWXH). 90" x 80" x 80", Approximate weight. 8,000 Lbs., Table w/ knee with approximately 5” vertical and cross ...more
ChipBlaster #D30-70, 8 GPM @ 1000 psi, dual pleated filters (10 Micron), single M code Control, ideal for machine uools up to 20 HP, S/N M981, 2015
Category: High Pressure Coolant Systems
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Chipblaster
Model: D30-70
Year: 2015
ChipBlaster D30-70, 8 GPM, @1,000 PSI, dual pleated filters (10 Micron), single M code controlled, ideal for machine uools up to 20 HP S/N M981, 2015 Stock# UD100602: Max GPM: 8 Maximum pressure: 1,000 PSI Run Dry Pump: Standard Transfer Pump: Standard Dual Filters: Standard Single Outlet: Standard Adjustable PSI ...more
Jet Master Master #MSHC-30P20LT, 435 psi, High Pressure Coolant System, never used
Category: High Pressure Coolant Systems
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Jet
Model: MSHC-30P20LT
Cecor #DB-342-4P, Hopper, 500 lb. capacity
Category: Hoppers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Cecor
Cecor DB-342-4P, hopper, 500lb Stock# UD100417No additional available.
Yellow Hopper, 35"
Category: Hoppers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Yellow hopper, 35" Stock# UD100422No additional available.
Red Hopper, 35"
Category: Hoppers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Red hopper, 35" Stock# UD100424No additional available.
Green Hopper, Large
Category: Hoppers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Green Green Hopper, Large Stock# UD100421No additional available.
Horizontal and Vertical Milling Machine
1 Result
Heckert #FW-450x1800-APUG, Horizontal/Vertical Mill w/All Tooling, 18.25" x 71" Work Area, (6) 0.7" width T-Slots, 52" X, 14" Y, 24.75" Z, 20/15 HP, 2240/1400 RPM
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Heckert
Model: 450APUG
STOCK #UD100295, Machinery Solutions, Inc. is pleased to quote the following:, (1) WMW-HECKERT Model FW-450 x 1800 APUG Heavy-Duty Combination Horizontal/Vertical, Knee-Type Production Milling Machine, S/N 326295/154 (2002), Price. $ 24,500.00, Standard s & Equipment:, Horizontal 20 HP motor, 18 spindle ...more
Horizontal Band Saws
3 Results
7" x 12" Turn-Pro #1212060, Bandsaw, 7" Throat depth, 0.75" width x 93" L x 0.0354" thick Blade, 1 HP, 240 V.
Category: Horizontal Band Saws
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Turn-Pro
Model: 1212060
Throat depth: 7" Drive Type: Geared Head Horsepower: 1 HP Angle of Rotation: 45 deg Maximum Capacity (Rounds) at 90 Degrees: 7" Maximum Capacity (Rectangular) at 90 Degrees: 7" x 12" Maximum capacity at 45 degrees: 4" Rotation Angle: 45 Rectangular Cutting Capacity - Horizontal At 90 Degrees 7 x 10-1/2 in Blade Width ...more
9" x 11" Kasto #Practical-E2, miter horizontal band saw, 3 HP, variable speed 62-450 FPM, coolant, new never used, 2018
Category: Horizontal Band Saws
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Kasto
Model: PRACTICAL-E2
Year: 2018
12" x 16" DoAll #C-80, automatic horizontal band saw, 5 HP, 144" x .035"blade, 1976
Category: Horizontal Band Saws
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Doall
Model: C-80
Year: 1976
Capacity, rectangular: 12" x 16" Cpacity, round: 12.75" Blade speeds: 85-450 FPM Blade size: 1" x 144' x.035" Blade wheel diameter: 16" Indexing stroke: 0-24" Motor: 5 HP Electrics: 230/460/3/60 Dimensions (252" length with conveyors): 73" x 252" x 64" Weight:4,500 lbs.
Horizontal CNC Machining Centers
1 Result
Haas #EC-1600, CNC horizontal machining center, 30+1 side mount tool changer, 64" X, 50" Y, 32" Z, 6000 RPM, #50, 30 HP, 64" x36" tbl., 2012
Category: Horizontal CNC Machining Centers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Haas
Model: EC-1600
Year: 2012
Haas EC-1600, Horizontal Machining Center, 64" x 50" Travels, B-Axis, 50-Taper, 6,000 RPM, Gearbox, Swing Arm ATC, S/N 2053862, 2012 Stock# UD100645Travels: X-Axis: 64" Y-Axis: 50" Z-Axis: 32" Table: Length: 64" Width: 36" Max. weight on table (evenly distributed): 10,000 lb Spindle: Max. Rating: 30 HP Max. ...more
Sunnen #MAN .120"-2.65", 4 speed, 250-820 RPM, 1/3 HP, 110/1/60, loaded w/ tooling
Category: Horizontal Hones
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Sunnen
Model: MAN
Year: 1968
SUNNEN MBB1600,.60" to 6.5" capacity, 1/8" x 16" length, 200-1600 RPM, 1/2 HP, 230/440, S/N 42213, 1968 Stock# UD68390: I.D. Range: 0.060" to 6.5" Length Range: 1/8" - 16" Long Spindle Speeds (12): 200 to 1600 RPM Honing Oil Capacity: 16 Gallons Spindle Motor: 1/2 HP Electrics: 208-230/440/3Ph ...more
Sunnen, Honing Machine & Tooling
Category: Horizontal Hones
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Sunnen
Tank Size (L x W x H): 36" x 16" x 16" Capacity : 34 gallons Pump HP: 1/4 HP Pump size: N37 Electrical: 230/460v, 3ph, 60hz.
100 Ton, Wysong #MTH100-144, Hydraulic Press Brake, w/1-Axis Back Gauge, 12' overall, 126" between housing, 8" Stroke, 7" Throat, 15 HP, 240 V.
Category: Hydraulic Press Brakes
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Wysong
Model: MTH100-144
Bending tonnage ( 5' x 1/4", 8' x 3/16", 10' x 10 gauge, 12' x 12 gauge.): 100 tons Bending length: 144" Distance between housing: 126" Stroke: 8" Adjustment: 9" Max. die space: 17" Throat depth: 7" Advance speed: 300 IPM Press speed: 20 IPM Return speed: 225 IPM Horsepower: 15 HP Oil capacity: 50 gallons Electrics: ...more
Plus One #LA/12, Industrial Battery Charger, dz/dt Plus T, 24 V Type, 1 Phase, 18.7/16.2/8.1 Amps, 208/240/480 Volts
Category: Industrial Battery Chargers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Plus One
Model: LA/12
Catalog number: 12090833 Type: 24 volts Volts: 208/240/480 Hz/Ph: 60, 1 phase Amps: 18.7 / 16.2 / 8.1.
Hasler #4401S, Chronometric Speed Indicator, 1000 RPM, S/N 234980
Category: Inspection Equipment
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Hasler
Model: 4401S
Hasler #4401S, chronometric speed indicator, 10,00 RPM, S/N 234980, PRICE ON REQUEST Stock# UT00025No additional available.
Mitutoyo #121-232, Micrometer, S/N 610193
Category: Inspection Equipment
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Mitutoyo
Model: 121-232
Mitutoyo #121-232, Micrometer S/N 610193, PRICE ON REQUEST Stock# UT00007No additional available.
60" Hanchett #Challenger-60, Knife Grinder, w/Magnetic Chuck & Grinding Spindle, 360 deg. Swiveling Knife Bar, 5-50 FPM, 7.5 HP, 230/460 V.
Category: Knife Grinders
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Hanchett
Model: 60
60" grinding capacity 7 1/2 HP Motor Built-in adjustable wheel dresser 360 degree swiveling knife bar Automatic/manual variable rate downfeed with rapid traverse Speed head traverse from 5 to 50 FPM Flood coolant system 230/ 460 Volt, 60Hz, 3 phase electrics.
18" width x 21" H x 14" D Quincy #40GC, gravity convection oven, 450°, s/n G4-005946
Category: Laboratory Type Ovens
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Quincy
Model: 40GC
Quincy GC40, lab Oven, 3 cubic feed, S/N G4-005946 Stock# UD100441: Max temperature: 232 deg C (450 deg F) Temperature stability: +/-3.0 deg C (6.0 F) Time to temperature (Ambient to 100 deg C): 6 minutes Time to temperature (Ambient to max.): 28 minutes Recovery @ 150 deg C (Door open 15 sec: 6 minutes Volume: 3 cu ...more
Lappers Lapping Machines
1 Result
24" Technalap #600VSD (England), 3 ring, 3 pneumatic hold downs, slurry pump, extra rings, s/n 2050
Category: Lappers Lapping Machines
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Technalap
Model: 600VSD
Lap plate diameter: 24" Lap plate thickness: 2" Lap plate, ID x OD: 4.5" x 24"" Lap plate speed: Variable Timer: Digital Conditioning ring, ID x OD: 9.75 I.D.x 11.25 O.D. Lap plate height from floor: 36" Machine base size: 38" x 42" Electrics: 220/3PH/60HZ Weight: 2,000 LBS : 3 pneumatic lift cylinders w/ work ...more
6" Kitagawa #B206, Hydraulic Chuck, 3-Jaw, A5 Mount, S/N 9188
Category: Lathe Chucks
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Kitagawa
Model: B206
Kitagawa #B206, Chuck, hydraulic 6", 3-Jaw, A5 mount, S/N 9188, PRICE ON REQUEST Stock# UT00002No additional available.
6" Pratt & Whitney Burnerd, Hydraulic Chuck, 3-Jaw, A5 Mount, S/N 9131-31723
Category: Lathe Chucks
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Pratt & Whitney
Pratt Burnerd Chuck, hydraulic 6", 3-Jaw, A5 mount, S/N 9131-31723, PRICE ON REQUEST Stock# UT00003No additional available.
6" Samchully (110mm flat), 10" (A2-8), 12" (A2-11) 15" (A2-15) 3-jaw hydraulic chucks, new
Category: Lathe Chucks
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Samchully
6" Samchully #HH-206, Big Bore Hydraulic Chuck, 3-Jaw, 46 mm Open Center, S/N 03101
Category: Lathe Chucks
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Samchully
Model: HH-206
Samchully HH-206, 6" 3-Jaw Big Bore, 46MM Open Center, S/N 03101 Stock# UT00139No additional available.
6.5" Yuasa #550-006, Chuck, w/Tailstock, 24-Position, Super Indexing Spacer
Category: Lathe Chucks
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Yuasa
Model: 550-006
Yuasa 550-006, 6-1/2" Chuck, 24 position, super indexing spacer Stock# UD100372Call, no additional at this time.
8" Buck Forkhardt #3AT8, Adus-Tru Chuck
Category: Lathe Chucks
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Buck
Model: 3AT8
Buck Forkhardt #3AT8, Chuck 8?, Adustru #A0002083002, PRICE ON REQUEST Stock# UT00004No additional available.
8" Kitagawa #B208, 3-Jaw Chuck, S/N 1PP313
Category: Lathe Chucks
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Kitagawa
Model: B208
Kitagawa B208, 8" 3 jaw chuck, S/N 1PP313 Stock# UD100252Call, no additional at this time.
10" Samchully #HS-10, 3-Jaw Chuck, w/A2-8 Adapter Plate, S/N 14L062
Category: Lathe Chucks
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Samchully
Model: HS-10
Samchully HS-10, 10" 3-Jaw chuck with A2-8 adapter plate, S/N 14L062 Stock# UT00127No additional available.
12" Samchully #MH-212, 3-Jaw Chuck, w/A2-11 Adapter Plate, 112 mm x 2 mm Drawnut, S/N 14H026
Category: Lathe Chucks
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Samchully
Model: MH-212
Samchully MH-212, 12" 3-Jaw chuck with A2-11 adapter plate and M112x2.0 Drawnut, S/N 14H026 Stock# UT00130No additional available.
12" Samchully #MH-212, 3-Jaw Chuck, w/A2-11 Adapter Plate, 112 mm x 2 mm Drawnut, S/N 13E064
Category: Lathe Chucks
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Samchully
Model: MH-212
Samchully MH-212, 12" 3-Jaw chuck with A2-11 adapter plate and M112x2.0 Drawnut, S/N 13E064 Stock# UT00131No additional available.
15" Samchully #HCH-15, Hydraulic Chuck, Take-Off from SL35, S/N 16H009
Category: Lathe Chucks
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Samchully
Model: HCH-15
Samchully HCH-15, S/N 16H009, Takeoff from SL35 : UT00148 Stock# UT00148No additional available.
Magnetic Chucks
3 Results
6" x 18" Supertec #OP2-5004, Permanent Magnetic Chuck
Category: Magnetic Chucks
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Supertec
Model: OP2-5004
Supertec OP2-5004, Permanent Mag Chuck, 6"x18" Stock# UT00149Call, no additional at this time.
8" x 24" Permanent Electro-Magnetic Chuck, Lever Controlled
Category: Magnetic Chucks
Seller: Machinery Solutions Inc
Location: Lexington, SC
8" x 24" Magnetic chuck Stock# UD100254.
16" x 32" Guang Dar #GI-1632, Electromagnetic Chuck, 2.834" Chuck height, 21 Pole Pitch, 90 VDC
Category: Magnetic Chucks
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Guang Dar
Model: GI-1632
Magnetic Chuck, Electromagnetic, 16x32 standard pole Stock# UD100269: Chuck Size: 6" x 32" Chuck height: 2.834" Pole pitch: 21 (4+17) Voltage: DC 90 V (60V-110V) Weight: 334 KG.
Material Lifts - (Drum, Pallet, Vacuum)
1 Result
1500 lb. Presto #PS62, Pallet Stacker w/Power Lift, 3" x 36" x 1.5" thick Fork, 60" Lift height, 24" Load Center, 12 V.
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Presto
Model: PS62
"Presto" Model #P562 "Presto" Pallet Stacker w/ Power Lift, S/N 54766, Price. $ 1,250.00, Capacity w/ 24” load center. 1,500 lbs., Lift height. 60”, Fork size, 1-1/2” thick. 3” x 36”, Fork adjustment, each. 11-1/2”, Distance between wheeled out riggers. 43”, Lift dimensions, W ...more
Microscope & Imaging Equipment
2 Results
Bausch & Lomb #StereoZoom-7, Microscope, w/Stand, Light source, 10x to 70x Magnification, 3" Work Distance, 45 deg. Binocular Angle
Category: Microscope & Imaging Equipment
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Bausch & Lomb
Model: STEREOZOOM 7
Magnification : 10X to 70X Work Distance: 76mm (3") Binocular Angle : 45 deg Eyepieces: Model: 31-51-71 Magnification : 10X Field Number: 20mm.
Microscope, Angles
Category: Microscope & Imaging Equipment
Seller: Machinery Solutions Inc
Location: Lexington, SC
Unknown Mfg Microscope, angles, PRICE ON REQUEST Stock# UT00039No additional available.
Milling Attachments
1 Result
Miyano #6M78620O, Y-Axis Milling Unit
Category: Milling Attachments
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Miyano #6m78620o
Miyano #6M78620O, Y- axis Milling unit, PRICE ON REQUEST Stock# UT00015Call, no additional at this time.
8" Pedestal Grinder
Category: Pedestal Grinders
Seller: Machinery Solutions Inc
Location: Lexington, SC
8" Pedestal Grinder Stock# UD100239No additional available.
Plain Cylindrical Grinders
1 Result
11" x 24" Tos, hydraulic, automatic infeed, plunge, 15-3/4"wheel, 5.5 HP, s/n #588814, 1988
Category: Plain Cylindrical Grinders
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Tos
Year: 1988
Swing over table : 11" Distance between centers : 24.8" Wheel head: Grinding wheel : 16" x 5" x 2" Wheel head motor : 5 HP Wheel head Swivel : 60 deg Wheel head speeds : 1570/2050 RPM Work head: Work head motor (2 Speeds) : 1/2 HP Work speed : 22.4 - 710 RPM Work head swivel : 90 deg Work head taper : #4 MT : ...more
Plant Shop and Chip Conveyors
2 Results
7.5" x 12.5' Turbo #6287-8004, Belt Type Chip Conveyor, 3" Moving Belt width, 7.25" High, 100" Belt Flat length, 42" Dump height, 1/4 HP, 480 V, 2000
Category: Plant Shop and Chip Conveyors
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Turbo
Model: 6287-8004
Year: 2000
, Overall width. 7-1/2”, Width of moving belt. 3”, Belt length (flat length). 100”, Overall height of 45” length. 7-1/4”, Overall length. 150”, Dump height (approximate). 42”, Estimated weight. 1,250 lbs, Horsepower. 1/4HP, Electrics. 480/3/60.
8" x 6.7' Jorgenson, Belt Type Chip Conveyor, for Makino MC40 horizontal machining center, 34" Belt Flat length, 18" overall width, 42" Dump height, 1/3 HP, 208 V
Category: Plant Shop and Chip Conveyors
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Jorgensen
Jorgenson belt type chip conveyor from Makino MC40 HMC, S/N 325182, 1984 Stock# UD45624: Belt width: 8" Belt length (flat portion): 34" Overall width of conveyor: 18" Overall length: 80" Dump height (approximate): 42" Estimated weight: 550 lbs Horsepower: 1/3 HP Electrics: 208/3/60 : Coolant tank 18" wide x 51" long ...more
Polishers (Including Buffing Jacks)
2 Results
Buehler #Ecomet-I, Polisher/Grinder, w/(30) 8" Polishing Pads & (200) 400 Grit Paper Disc, 8" diameter Table, 110 V.
Category: Polishers (Including Buffing Jacks)
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Buehler
Model: ECOMET-I
Table diameter: 8" Voltage: 110V : 30 pieces of 8" polishing pads, P/N 40-1108 200 pieces of 400 grit paper disc, P/N 305118-400-100.
Hammond #6-R-C, Polisher Sander
Category: Polishers (Including Buffing Jacks)
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Hammond
Model: 6-R-C
Hammond polisher sander 6-R-C, polisher sander 6-R-C, 6-R-C Stock# UD100340Call, no additional at this time.
Power Squaring Shears (Inch)
2 Results
1/4" x 10' Betenbender #10-250, Hydraulic Shear
Category: Power Squaring Shears (Inch)
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Betenbender
Model: 10-250
Year: 2009
36" Electric Power Backgage with LED Readout Power Adjust Variable Rake Worklight Squaring Arm (2) 48” Front Support Arms Hour Meter Shear Knives All Steel Construction Electric Overload Protection Solid Table – Bolt on Segments One Shot Lubrication.
1/4" x 10' Donewell #401920, Hydraulic Shear, 20.5" gap bed depth, 39" back gauge, 18 hold downs, 22-75 SPM, 15 HP, 480 V.
Category: Power Squaring Shears (Inch)
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Donewell
Model: 401920
(1) Done Well, Model 6-3000, ¼” X 10, Hydraulic Guillotine Shear, SN 28108363 (1981), Price. $ 19,500.00, *:, Max capacity, mild steel. 1/4", Max cutting length. 122", Gap bed depth. 20-1/2”, Adjustable Blade Rake (Min. - Max.). 0.5 - 1.57, Adjustable Blade Clearance (Max. - Min.). ¼” ...more
Press Type Spot Welders
2 Results
20 KVA Lors #120AP, air operated vertical press type spot welder, 18" throat, 208 V.
Category: Press Type Spot Welders
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Lors
Model: 120AP
Lors 120AR, 20 KVA Spot welder, Entron control, S/N 2812773 Stock# UD100331: Capacity @ 50% duty cycle: 20 KVA Throat dept: 18" Primary volts: 208 Frequency: 60 hz Secondary volts (min-max): 1.7 to 4 Voltage: 208v/60hz/1ph Fused: 70 amp Approximate weight: 800 Lbs.
20 KVA Teledyne Peer #AR-420, spot welder w/Entron Weld Control, 18" throat,s/n 800100
Category: Press Type Spot Welders
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Teledyne
Model: AR-420
Teledyne Peer FR450, 20 KVA Spot welder, Entron control, S/N 830056 Stock# UD100339: Capacity @ 50% duty cycle: 20 KVA Throat dept: 18" Primary volts: 220 Frequency: 60 hz Secondary volts: 2.7 to 4.7 Approximate weight(min-max): 800 Lbs.
Pull Down Broaching Machines
1 Result
5 Ton x 36" stroke, Ty-Sa-Man Miles #MBLD-10-36-60, 14" x 14" table, 20 HP, air operated automatic broach puller mechanism
Category: Pull Down Broaching Machines
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Ty-Sa-Man
Model: MBLD-10-36-60
Ty Miles Model #MBLD-10-36-60, 5 Ton, Vertical Broaching Machine, S/N 970404, (Remanufactured 2022), Capacity. 5 Tons, Stroke. 36”, Table size. 14” x 14”, Hydraulic Pump. 20 HP, Hydraulic Tank. 100 Gallons, Hydraulic Oil. Mobil DTE24, Air. 80 psi, Coolant Pump. ¼ HP, Coolant Capacity. 30 ...more
4.1'-13-3/4" Kao Ming #KMR-1250DH, 30-1500 RPM, #5,hydraulic clamp head arm column,s/n 1814,1985
Category: Radial Drills
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Kao Ming
Model: KMR-1250DH
Year: 1985
, Column diameter. 13-3/4”, Max distance, face of column to centerline of spindle. 49-1/4”, Min distance, face of column to centerline of spindle. 14-1/8”, Max distance, vertical arm travel. 27-1/2”, Max distance, face of spindle nose to base. 54-3/4”, Spindle horsepower. 5 HP, Spindle ...more
Reciprocating Surface Grinders - Horizontal Spindle
3 Results
6" x 18" DoAll #D618-7, Surface Grinder, w/Magnetic Chuck, 2-Axis, 7" x 0.5" x 1.25"grinding wheel, 12" under wheel, 1 HP, 3450 RPM, 440 V., 1966
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Doall
Model: D618-7
Year: 1966
1) DoAll Model D618-7, 6" x 18" Surface Grinder, 2-axis, Magnetic Chuck, S/N 219-66257, (1966), Price ...more
30" x 168" Thompson #CXV, horizontal w/swivel vertical spindle, 30" x 14" mag chuck, 30 HP, s/n 14CXV-596088, Nice condition
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Thompson
Model: CXV
Brown & Sharpe #612, Surface Grinder w/chuck, 480 V, S/N 523-612-152
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Brown & Sharpe
Model: 612
Call, no additional at this time.
Right Angle Heads
1 Result
Lucas, Right Angle Milling Head, from Lucas 542B120 horizontal boring mill, 30" Size, 5" Spindle diameter, 360 deg. Swivel, #50 Taper
Category: Right Angle Heads
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Lucas
1) Lucas Right Angle Milling Head from Lucas 542B120 HBM., Price. $ 4,000.00, For spindle diameter. 5”, Spindle taper. #50, Ration between machine spindle and right-angle head spindle. 2 to 1, Swivel positioning of right-angle setting for milling a full. 3600, Face of machine spindle head to center line of ...more
Rocker Arm Welders
1 Result
20 KVA Miller #MPS-20AFT, spot welder,pedestal,air operated, 10" tongs, 1/4"cap., 230 V.
Category: Rocker Arm Welders
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Miller
Model: MPS-20AFT
Model: 20KVA Rated output 50% duty cycle: 20KVA Work capacity, combined, mild steel:1/4" Tong length: 10" Electrical: 230v, 1 ph., 60 cy Amps: 90 OCV: 3.5 Floor space: 15" x 30" Weight: 250 lbs.
4" x 8" Ross #4x8 TRM, floor model high speed 3 roll mill, 270 RPM,s/n #70520
Category: Roll Mills
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Ross
Estimated production rate: 1-5 Gal./Hour Roll diameter: 4" Roll length: 8" Front roll speed: 270 RPM Electrics:.30/60/3 Motor: 1 HP Length x width x height: 30" x 23" 43" Weight: 600 lbs.
Rotary Screw Air Compressors (Positive Displacement)
1 Result
525 cfm, 150 psig, Sullair #25-150L, rotary screw air compressor package, 150 HP, 460 V.
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Sullair
Model: 25-150L
15" x 15" Advance #B15, Cross-Sliding Rotary Table, 12" X & Y Travel, 360 deg. Rotation
Category: Rotary Tables
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Advance
Model: B15
Advance B15, 15" x 15" cross-sliding rotary table, S/N B1517074 Stock# UD11000: Table Top Size: 15" x 15" X & Y Axis Travel: 12" Rotation of Table: 360 deg.
System 3R #321.7, Orbi-Cut Mini-Simplex Compact Planetary Head w/Built In Quick Clap
Category: Rotary Tables
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: System
Model: 3R 321.7
System 3R 321.7, Orbi-cut mini-simplex compact planetary head with built in quick clap Stock# UT00050Call, no additional at this time.
Shear knives - 124" L x 4" H x 1" W, top & bottom set, 8" hole spacing w/ 16 each for beveled 7/8" bolt holes for bevel head bolt, like new condition
Category: Shear Blades
Seller: Machinery Solutions Inc
Location: Lexington, SC
Steel Slat and Chip Conveyors
1 Result
Mosic Mosnic #RD3C-116A (Makino), drum filtering & scraper conveyor for A51nx or A61nx, near new condition, 2021
Category: Steel Slat and Chip Conveyors
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Mosic
Model: RD3C-116A
Year: 2021
2 4" x 36" x 4" Brown & Sharpe, Surface Plate, w/Stand, No Ledge, Grade B, Gray Granite, 500 lbs. Weight
Category: Surface Plates
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Brown & Sharpe
Tool room Grade: B Size (W x L x T): 24" x 36" x 4" Weight: 500 lbs.
24" x 3 6" x 6" Starrett, Pink Granite Surface Plates, w/Stand, No Ledge, Grade B, 700 lbs. Weight
Category: Surface Plates
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Starrett
Tool room grade: B Size (W x L x T): 24" x 36" x 6" Weight: 700 lbs.
24" x 3 6" x 6" Surface Combustion Combustion grey granite plate, w/stand, 4 ledge, grade B, 700 lbs. weight
Category: Surface Plates
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Surface Combustion
Gray granite surface plate size 24”x36” with stand Stock# UD100437: Tool room grade: B Size (W x L x T): 24" x 36" x 6" Weight: 700 lbs.
Granite Surface Combustion Plate w/Stand
Category: Surface Plates
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Surface Combustion
Granite surface plate with stand Stock# UD100377Call, no additional at this time.
Swiss Type and Lathe CNC Automatic Screw Machines
1 Result
Tsugami #BO123, 3-Axis Swiss, 3-12mm, Fanuc 0i, part pusher from hooper for sawn parts to 10" length. (2) machines, (2010)
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Tsugami
Model: B0123
, Working bar stock diameter (min-max.) 3 mm–12 mm, Maximum work length (stationary guide bushing) 210 mm, Tapping diameter M6 x 1, Max cross drilling capability (No tooling) 6 mm, Max cross tapping. 5 mm x 0.8, Main spindle speed 200-12,000 RPM, Number of tools, capability 9, Tool size 12 mm, Spindle motor. 1.5 ...more
Snow #1-UD, Tapping Machine, Vertical 2-Spindle, 10.4" x 18" Table, #10 to 0.25" Tapping capacity, 1/3 HP, (4) 950-3450 RPM, 220 V
Category: Tapping Machines
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Snow
Model: 1-UD
(1) Snow model 1-UD Vertical Two Spindle Tapping Machine, S/N T-24323, Price.$ 2,450.00, Table size ...more
Miller #Syncrowave-250, AC/DC Welder
Category: Tig Welders
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Miller
Model: SYNCROWAVE-250
Miller Microwave 250 welder Stock# UD100180: Volts: 200/230/460 KW: 13.9 HZ: 60 Net weight: 400 lbs.
Tool and Cutter Grinders
2 Results
Accu-Finish #Series-II, Tool Lapping/Grinder, 6" dia. wheel, 0.5"arbor hole, 240 RPM Spindle, 115 V.
Category: Tool and Cutter Grinders
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Accu-Finish
Model: SERIES-II
Wheel diameter: 6" Arbor hole: 1/2" Spindle speed: 240 RPM Electrics: 115V/60HZ Dimensions: 13.25" L x 17" D x 11" H Weight: 47 LBS.
Hammond #WD-6, Wet Carbide Tool Grinder, (2) 6.75" x 12" table, 0-300° table tilt, 6" wheel, 1/2 HP, 3600 RPM, 208-230/460 V.
Category: Tool and Cutter Grinders
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Hammond
Model: WD-6
Table tilt (2): 6-3/4" x 12" Tables tilt: 0 to 300 Wheel diameter: 6" Motor w/ brake: 1/2 HP Motor Speed: 3600 RPM Electrics: 208-230/460/3 Floor space: 20" x 32" Weight: 290 lbs : Spray control guarding GS combination protractor Pump and tank in base Light fixture.
Dumore #57-031, Tool Post Grinder, w/Pulleys, Belts & Spindles, 10" I.D. Quill, 0.125"-6" diameter Wheels, 3200-42500 RPM Grinding, 3/4 HP, 120 V
Category: Tool Post Grinder
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Dumore
Model: 57-031
Dumore #57-031 Tool 57-031, #57-031 Tool Post Grinder, 3/4 HP, 120 volt, 3 ph, 60 cy., S/N 8526 Stock# UD100333Call, no additional at this time.
Tooling and Accessories - Miscellaneous
8 Results
Desmond #11320#1, Cutting Wheels, Set of 10
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Desmond
Model: 11320 #1
Desmond 11320 #1, Cutting Wheels, Set of 10 Stock# UT00146Call, no additional at this time.
Straight Milling, Eppinger #R78688A, S/N 38143-12
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Eppinger
Model: R78688A
Eppinger R78688A, Straight Milling, S/N 38143-12 Stock# UT00143Call, no additional at this time.
Lot of Miscellaneous Cold Saw Blades, Kaltenbach, 16"
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Kaltenbach
Kaltenbach lot of miscellaneous 16" coldsaw blades, CALL FOR SPEC AND PRICE. Stock# UD48275Call, no additional at this time.
Procunier #23465, Lead Screw, 16 Pitch
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Procunier
Model: 23465
Procunier #23465, 16 pitch leadscrew, PRICE ON REQUEST Stock# UT00017Call, no additional at this time.
Probe w/3 Stylis, Renisahaw #TP1, S/N 000236
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Renisahaw
Model: TP1
Renisahaw TP1, probe w/ 3 stylis, S/N 000236, PRICE ON REQUEST Stock# UT00027No additional available.
Probe 2/14 Styles, Renisahaw #TP1s, S/N TD2504
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Renisahaw
Model: TP1S
Renisahaw TP1s, probe 2/14 styles, S/N TD2504, PRICE ON REQUEST Stock# UT00021No additional available.
Drawnut, Samchully #DN-HS-06, 52 mm diameter x 2 mm pitch
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Samchully
Model: DN-HS-06
Samchully DN-HS-06, drawnut, HS06, 52x2.0 TPI Stock# UT00138Call, no additional at this time.
Tonichi Mfg. #230063616, Dial Indicating Torque Wrench, S/N 03646G
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Tonichi Mfg
Model: 230063616
Tonichi Mfg #230063616, dial indicating torque wrench, S/N 03646G, PRICE ON REQUEST Stock# UT00018No additional available.
Universal Milling Machine - Horizontal
1 Result
Heckert #FW-315, horizontal mill, #50, 28-1400 RPM, automatic cycle, R &F, DRP
Category: Universal Milling Machine - Horizontal
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Heckert
Model: FW-315
Table: Table working surface: 49" x 12.4" Longitudinal travel: 33-1/2" Cross travel: 11" Vertical travel: 14" T-Slots - Number & Width: 4, 9/16" Distance between T-slots: 2" Maximum weight of workpiece: 2,200 Lbs Spindle: Spindle taper: #50 Spindle speeds (18): 28-1400 RPM Maximum distance Spindle Center to Table: ...more
Vertical Band Saws
1 Result
18" x 18" Hem #V100LA-2, fully automatic vertical band saw, 171" x1.5" blade, 5 HP, 1996
Category: Vertical Band Saws
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Hem
Model: V100LA-2
Year: 1996
Vertical CNC Machining Centers
9 Results
Daewoo Doosan #DMV6025s, Vertical Machining Center, Fanuc 18iMB Control, 59.8" X, 25.6" Y, 25.6" Z, 28.7" x 70.8" Table, 30 HP, 20-4500 RPM, 30 automatic tool changer, 2005
Category: Vertical CNC Machining Centers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Daewoo Doosan
Model: DMV6025S
Year: 2005
CAPACITY: X axis travel: 59.8 inches Y axis travel: 25.6 inches Z axis travel: 25.6 inches Table size: 28.7 x 70.8 inches Allowable table load: 4,400 pounds Table T - slot spacing: x width (5) 4.92" x.71" SPINDLE: Spindle nose to table top: 7.1 to 32.7 inches Column to spindle center: 26.8 inches Spindle taper: ISO ...more
Daewoo Doosan #DVC-320, vertical machining center w/pallet changer, Fanuc 21iM, 20.4" X, 12.6" Y, 13.7" Z, 10000 RPM, 14 automatic tool changer, 2002
Category: Vertical CNC Machining Centers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Daewoo Doosan
Model: DVC-320
Year: 2002
S, * Fanuc 21iM Control, * High speed 10,000 RPM precision spindle, * Powerful 10 hp spindle motor, * Cartridge spindle design, * High Precision spindle with two double-row cylindrical, roller bearings and two angular contact bearings, * Spindle taper air blow, * Spindle Orientation, * Rigid tapping, * Spindle overide ...more
Fryer #VB-60, bed mill, Siemens Touch 2100 CNC, box-way, 30" x 60", 25 HP, 10000 RPM, 2-speed gear box, Cat 40, 20 automatic tool changer, Chiller, S/N 60294,2011
Category: Vertical CNC Machining Centers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Fryer
Model: VB-60
Year: 2011
Machine Capacity: X, Y & Z Travel: 60" x 30" x 28" Rapid traverse rate: 1,000 IPM X & Y Table load (evenly distributed): 4,000 lbs. Table: Table Size: 24" x 73" T-Slots (No./Width): 5 /.709" Tabletop to floor: 32" Spindle: Motor (Peak/Continuous): 25 HP Gear box: 2-speed Spindle Speed (Programmable): 60 - ...more
Haas #TM-1, 12" x30", 7.5 HP, 10 HP, 10 automatic tool changer, 1 or 3 phase,s/n 26282,11/2001
Category: Vertical CNC Machining Centers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Haas
Model: TM-1
Haas #VF-0, 20" X, 16" Y, 20" Z, 16 station drum automatic tool changer, rigid tapping, 7500 RPM, S/N 19420, 1999
Category: Vertical CNC Machining Centers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Haas
Model: VF-0
Year: 1999
Table size: 14" x 26" Table load capacity:: 3,000 lbs. Rapid traverse rates (X, Y & Z):: 710 IPM Travel: X-axis: 20" Travel: Y-axis: 16" Travel: Z-axis: 20" Table Top to Spindle Nose: 4" to 24" Spindle taper:: #40 Spindle speed:: 0 - 7,500 RPM Spindle HP: 20 HP ATC tools capacity (carousel): 16 Voltage: 208/230 ...more
Haas #VF-2SS, 30" X, 16" Y, 20" Z,inline spindle, 24 station cam type automatic tool changer, 12000 RPM,S/N 37352,2004
Category: Vertical CNC Machining Centers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Haas
Model: VF-2SS
Year: 2004
Table size: 14" x 36" Table load capacity: 1,500 lbs. Rapid traverse rates (X, Y & Z): 1,400 IPM Travel: X-axis: 30" Travel: Y-axis: 16" Travel: Z-axis: 20" Table Top to Spindle Nose: 4" to 24" Spindle taper: #40 Spindle speed: 0 - 12,000 RPM Spindle HP: 30 HP ATC tools capacity (swing arm): 24 + 1 Tool change ...more
Hyundai Wia #VX-500, Vertical Machining Center, 3-Axis, Fanuc 0i-MC Control, 41.7" X, 20.1" Y, 25" Z, 47.2" x 19.7" Table, 25 HP, 10000 RPM, 24 automatic tool changer, 2009
Category: Vertical CNC Machining Centers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Hyundai Wia
Model: VX-500
Year: 2009
Hyundai Wia VX-500, 3-Axis Vertical Machining Center, Fanuc 0i-MC CNC Control, 24 Pocket Arm Type ATC, 40-Taper, 10,000-RPM, 290 PSI Through Spindle Coolant, Oil Chiller, Rear Discharge Chip Conveyor & augers, S/N G3684-1348, 2009 Stock# UD100622: X Axis Travel: 41.7" Y Axis Travel: 20.1" Z Axis Travel: 25" Rapid ...more
Okuma #Millac-1052V, OSP-P200M, 80.7" X, 41.7" Y, 31.5" Z, 6000 RPM, coolant thru spindle, 36 automatic tool changer, Cat 50, 1000 PSI, S/N 11389, 2008
Category: Vertical CNC Machining Centers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Okuma
Model: MILLAC-1052V
Year: 2008
Capacity: X axis travel: 80.71" Y axis travel: 41.73" Z axis travel: 31.5" Spindle center to column slide way: 43.31� Table size: 86.61" x 41.34" Allowable table load: 6,600 lbs. Spindle: Spindle taper: CAT 50V flange Maximum spindle speed: 6,000 RPM A.C. spindle motor (cont. / 30 min.): 30 HP Spindle nose to table ...more
Okuma #Millac-1052VAE, OSP-P200M, 40" x120", #50,6000 RPM, thru spindle coolant, 4th axis interface, 3400 cut hours, S/N 14380,2008, excellent
Category: Vertical CNC Machining Centers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Okuma
Model: MILLAC-1052VAE
Year: 2008
Vibratory Finishers
1 Result
45 cu.ft. Sweco #M45RC, Vibro-Energy wet grinding mill, 5 HP, s/n #45M-380-5, 1980
Category: Vibratory Finishers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Sweco
Model: M45RC
Year: 1980
Sweco M45RC, Vibro Energy Wet Grinding Mill, S/N 45M-380-5 (1980) Stock# UD100200: Bowl capacity: 45 Cu Ft Working capacity: 20 gallons Bowl outside diameter: 48" Bowl width: 13" Boel depth: 24" Main motor: 5 HP Motor RPM: 1,200 Electrics: 220v/3ph/60cy Weight approximately: 1,200 lbs.
Washer Parts - Miscellaneous
1 Result
Clark #MT11008, Parts Washer, Floor Model, 20 Gallon Solvent capacity, 29.9" x 20.75" x 10.8" Tank, 50 GPH, 220 V
Category: Washer Parts - Miscellaneous
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Clark
Model: MT11008
Overall Dimensions: 30 3/4" x 211/4" x 35 3/4" Tank Dimensions: 29 7/8" x 20 3/4" x 10 8/10" Max Solvent Capacity: 20 Gallons Pump Output Through Hose: 50 GPH Electrical Requirements: 220V.
Bendix #Tangi-Matic, Wheel Dresser, 0.70-0.375 Radii, S/N 7305
Category: Wheel Dressing Machines
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Bendix
Model: TANGI-MATIC
Bendix Tangi-Matic, radii dresser,.70 to.375 radii, excellent condition, S/N 7305 Stock# UD16052: Radii capacity.70 to.375.
Jones & Shipman Tools #F750, Radius & Angle Dresser, 0.03"-1.5" Concave & 0"-1.5" Convex Radius, 14" max Wheel diameter, 4"-7.5" Height Adjust.
Category: Wheel Dressing Machines
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Jones & Shipman
Model: F750
Price. $725.00, Concave Radius (Min. & Max). 1/32" -1-1/2", Convex Radius (Min. & Max.). 0" to 1-1/2", Max. Wheel Dia. 14", Length of Angular Travel. 2" at max height, Height Adjustment. 4" min to 7-1/2" max, Base Dimensions. 3-3/16" x 4", Note: Mint Condition, · Case.
Lastword #B, Wheel Dresser, 8" Wheel capacity, 2.6" Centerline, 0"-3" Concave & 0"-1.5" Convex Radius
Category: Wheel Dressing Machines
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Lastword
Model: B
1) Lastword “Model B” Wheel Dresser, S/N C169, Price.$ 575.00, Centerline. 2.6”, Convex. 0 to 1-1/2”, Concave. 0 to 3”, Wheel capacity. 8”, Excellent condition!.
