Manufacturer: Daewoo Doosan
Model: DMV-6025S
Year: 2005
Automatic Tool Changer: 30
Longitudinal" X: 59.8
Cross" Y: 25.6
Vertical" Z: 25.6
RPM: 20
Stock # UD100619
1 / 2
Click to zoom in
1 / 2
For Sale by Machinery Solutions Inc
Surplus Record Dealer Since 1999
Location: Lexington, SC
Contact Jason A.
Phone Number: 803...> Show Phone Number 803-359-7000
Let the seller know you found their listing on Surplus Record!
Description
Specifications: CAPACITY: X axis travel: 59.8 inches Y axis travel: 25.6 inches Z axis travel: 25.6 inches Table size: 28.7 x 70.8 inches Allowable table load: 4,400 pounds Table T - slot spacing: x width (5) 4.92" x .71" SPINDLE: Spindle nose to table top: 7.1 to 32.7 inches Column to spindle center: 26.8 inches Spindle taper: ISO No. 50 Spindle speed: 20 - 4500 RPM Spindle gear ranges: 2 A.C. spindle motor (30 min.): 30 HP Spindle torque (30 min.): 428 ft-lbs. AUTOMATIC TOOL CHANGER: Number of tools: 30 Tool shank: CAT 50 Pull Stud: 316-45 Max. tool Dia. (adj. pocket full): 5.1 inches with empty adjacent pockets 9 inches Max. tool Length: 13.8 inches Max. tool Weight: 33 lbs. Tool change time (tool to tool): 2.5 sec. Tool change time (chip to chip): 6.5 sec. MOTION: Rapid traverse rate: 512 IPM Maximum linear feedrate: 315 IPM A.C. servo motors X,Y&Z: 4 HP Feed Thrust Z axis: 3,095 lbs. GENERAL: Floor space required (L x W): 184 inches x 168 inches Machine height: 141 inches Machine weight: 27,500 lbs. Voltage required: 205 - 235 volts / 3 phase KVA required: 60
Get Your Price from Machinery Solutions Inc!
Buyers Who Viewed This Listing Also Viewed:
JUST ADDED!
Mazak #VCN-700/40-IIHS, CNC vertical machining center, 30 automatic tool changer, 60.2" X, 27.6" Y, 25.6" Z, 18000 RPM, #40, 30 HP, 68.5" x27.56" tbl., 2012
Category: Vertical CNC Machining Centers
Seller: Machinery Resources Intl
Location: Simi Valley, CA
Mfr: Mazak
Model: VCN-700/40-IIHS
Year: 2012
MAZAK VCN-700D/40-IIHS vertical machining center from 2012, well-maintained and ready for your workshop. A reliable choice for precise machining tasks, reflecting MAZAK's trusted performance in used equipment. Secure this efficient model today!, TABLE WORKING SURFACE 68.5" X 27.56", TABLE LOAD CAPACITY 4409 LBS ...more
JUST ADDED!
Okuma #MB-66VA, CNC vertical machining center, OSP-P300MA, 59" X, 25.9" Y, 25.9" Z, 15000 RPM, Cat 40, 32-ATC, 2017 (2 available)
Category: Vertical CNC Machining Centers
Seller: Perfection Industrial Sales
Location: Elk Grove Village, IL
Mfr: Okuma
Model: MB-66VA
Year: 2017
Okuma MB-66VA, w/ OSP-P300MA Control, 60.24” x 25.98” Table, Travels: 59.06”X, 25.98”Y, 25.9”Z; 3,300 lb. Max. Table Capacity, 1,575 IPM Rapid Traverse X/Y/Z, CAT 40 Spindle Taper, 15,000 RPM Max. Spindle Speed, 32-ATC Renishaw OTS Tool Setter & Optical, Through Spindle Coolant ...more
JUST ADDED!
Okuma #MB-66VA, CNC vertical machining center, 30 automatic tool changer, 59" X, 25.9" Y, 25.9" Z, 15000 RPM, #40, 30 HP, rigid tap, OSP-P300M, thru spindle coolant, 2013
Category: Vertical CNC Machining Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Okuma
Model: MB-66VA
Year: 2013
*All are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*, Okuma OSP-P300M CNC Control, Box Way construction, PCMCIA Card Slot, MPG Control, Rigid Tapping, Coolant Tank, Travels:, X-Axis: 59.06" ...more
Haas #VF-5/50XT, CNC vertical machining center, Haas NextGen Control, 60" X, 26" Y, 25" Z, 7500 RPM, 30+1 side mount tool changer, thru spindle coolant, 2022
Category: Vertical CNC Machining Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Haas
Model: VF-5/50XT
Year: 2022
Haas VF5/50XT CNC Mill, Travels, X Axis: 60.00″, Y Axis: 26.00″, Z Axis: 25.00″, Spindle Nose to Table (~ max): 32.9″, Spindle Nose to Table (~ min): 7.9″, Spindle, Max Rating: 30.0 hp, Max Speed: 7500 rpm, Max Torque: 340.0 ft-lbf @ 700 rpm, Drive System: 2-Speed Gearbox, Taper: 50 ...more
Haas #VF-5XT, 3-Axis CNC Vertical Machining Center, 60" X, 26" Y, 25" Z, 62" x 23" table, 30 HP, 7500 RPM, 30 automatic tool changer, Haas control, 2005
Category: Vertical CNC Machining Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: VF-5XT
Year: 2005
Vertical Machining Center in used condition. s a 30 HP spindle motor, 30-position sidemount automatic toolchanger, probing, and 2-speed gearbox. : 60"x26"x25" travel, 7,500 RPM, 62"x23" table, 3-axis, 4th axis prewire., 2005 HAAS VF-5XT, X. 60", Y. 26", Z. 25", Power. 30 hp, RPM. 7,500 RPM, # ATC. 30, Table-W. 62" ...more
