Met-Pro Machinery Inc
Detroit, MI 48207
Gold Level Dealer
Surplus Record Dealer Since 2001
Contact
About
Met-Pro Machinery, Inc. buys and sells new and used coil processing equipment, specializing in Slitting, Cut to Length & Blanking.Products & Services
- Coil Handling/Processing Equipment
- Cut to Length Lines
- Packaging Equipment
- Rollformers
- Rolling Mills
- Slitting Lines
- Tube Machinery & Mills
Associations & Affiliations
162 listings in 50 categories
6" x 26" x 17" United, Reversing Cold Mill, 4-High, 1-Stand, 7"-14" width Strip, 0.16"-0.05" Thickness, 16"-57" ID/OD, 1330 FPM, 500 HP
Category: 4 High Rolling Mills
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: United
Air Conditioning and Water Chiller Equipment & RTU's
1 Result
Kooltronic #KA4C6NP36R, Air Conditioner, R134A, 6000 BTU, 350/150 psig, 115/100 V
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Model: KA4C6NP36R
, Kooltronic Air Conditioner, Model: KA4C6NP36R, S/N: G04A2346, Volts: 115, 60Hz, 1PH, Cooling FLA: 16.5, Volts: 100, 50Hz, 1PH, Cooling FLA: 17.0, Cooling BTU: 6000, Refrigerant: R134A, 15 Oz., Ambient Temp: 50-125 degrees Fahrinheit, Design Pressure PSIG: Low 150; High 350, Max Fuse Size: 25A, Like new or New.
Avon #1043B9, Roller Bearing, 38.4" Pitch dia., 2.5" diametral Pitch, (96) Teeth, (119) 1" dia. Balls
Category: Ball & Roller Bearings
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Avon
Model: 1043B9
, 38.4 Pitch daim., 2.5 diametral pitch, 20 degree pressure angle, 96 teeth, 44.66" bolt circle lower, 40.94" bolt circle upper, 5/8-11 bolt holes, 3.54 height, 47" diameter base frame diameter, 1" ball diameter, 42.81 bearing pitch diameter, 119 aprox. # of balls, 60 degree contact angle, 0.0000 bearing IDC, Static ...more
Banding Lines and Coil Packaging Lines
2 Results
6000 lb. Pro-Eco packaging line pieces, 60" outside dimension
Category: Banding Lines and Coil Packaging Lines
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Pro-Eco
, MFG: Signode, 60" OD x 6,000lbs Capacity, 37" pass height with feet. Min pass height of 30", 5" dia. x 49.5" Roll Face(Coil can overhang drives/sprocket guards), 34" from cneterline of conical rolls to Head supprt frame, 52" between Ends of conical rolls, Max coil width of ...more
10000 lb./12000 lb. Stamc, Coil Packaging Line w/Stacker, 72" OD x 36" multi
Category: Banding Lines and Coil Packaging Lines
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Stamco
MFG: STAMCO, Pick and Place Downlayer, 10,000Lbs Capacity, 16" Min. ID, 4" dia. x 82" Conveyor Rolls on 8" Centers, 36" Pass Height, In Line Discharge, 90" Long Driven Roller Conveyor, 3.5" dia. x 79" Conveyor Rolls on 6" Centers, 36" Pass Height, 90" Cross style Banding Table, 4 Arm Lift & Rotate, 3.5" dia. x 79" ...more
11" wide, Gooseneck Scrap Conveyor
Category: Belt Conveyors
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
, -Gooseneck Scrap Conveyor:, S/N: 28070, 11" Wide Conveyor Belt, AC Motor Driven, Overall Size: 231" L x 28" W x 74" High.
Boom Lifts
1 Result
JLG Industries, Inc. 660SJ, Articulated Boom, Lift
Category: Boom Lifts
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Jlg
Model: 660SJ
Year: 2018
MFG: JLG Industries, Inc., Model: 660SJ, S/N:, Year: 2018, Max. Platform Height: 66', Max. Horizontal: 56.75', Max. Capacity: 500lbs., 12V. System, Fuel Type: Deisel, Weight: 26,180lbs., Size(stowed): 35'8" L x 100" W x 8'5" H.
10000 lb. Acco, C-Hook, 32" Arm length, 14" width Curved Plate, 21" Gap, 2" thick C-Hook Body
Category: C-hooks
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Acco
, MFG: ACCO, York, PA, Style No.: 234SU10, S/N: 1137642, 10,000lbs capacity, 32" Arm Length, Curved plate width 14", Curved plate to bottom of arm: 13", Gap/opening above arm: 21", Thickness of C-hook body" 2".
44000 lb. Garland Welding C-Hook, 72"
Category: C-hooks
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Garland Welding
MFG: GARLAND WELDING, Lowellville, OH, S/N: 15-0474, Capacity: 44,000LBS., 72" wide coil, 72" OD coil, Ship Weight 4800lbs, QTY of 3 available.
75000 lb. Cady, CM C-Hook, 72" wide coils, 57" arm, 30" throat
Category: C-hooks
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Cady
MFG: Cady Lifter "CM", S/N: 15867, 75000Lbs. Capacity, 57" long arm, 30" Gap, 20" ID or larger.
20000 lb. Southworth, Coil Car, Scissor Lift Design, 63.5" L Platform
Category: Coil Cars
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Southworth
, Southworth Coil Car, -20,000 lbs. Capacity, -Scissors Lift Design, -63.5" Long Platform, -Approx. 11" from Floor to bottom of "V" Cradle, -Self-Contained Hydraulics, Side Mounted, -Hand Operated Pendant Control, -Overall Size: 63.5" L x 75" W x 50" High, -In Storge: Toledo, OH., Note: (2) Coil Cars available.
20000 lb. Stamco, Coil Car, Retractable Cable Reel, 48" width V-Cradle, 60" outside dimension capacity, 12" H Bolt-On Riser
Category: Coil Cars
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Stamco
, Stamco, 48" Wide "V" Cradle, 60" O.D. Max., Approx. 18" Lift, Approx. 12" From Floor to bottom of "V" Cradle, Retractable Cable Reel, Self-Contained Hydraulics, 12" High Bolt-On Riser for Small O.D. Coils, Overall Size: 91" L x 48" W x 80" High.
25000 lb. SES, Coil Car, Rotating V-Cradle, 80" outside dimension capacity, 54" width V-Cradle, 34" Lift, 6" bore x 34" stroke Lift Cylinder, 4" diameter Camrolls, 10 HP
Category: Coil Cars
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Ses
, -25,000 lb. x 80" O.D. Capacity, -Rotating "V" Cradle, -Hydraulic Motor Powered, -54" Wide "V" Cradle, -Holddown Arm with Phenolic Spacer Rings, Hydraulic Cylinder Actuated, -Approx. 25" From Floor to Bottom of "V" Cradle, -Lift: 34", -Parker Series 2H Hydraulic Lift ...more
30000 lb. ECD #CC3, Coil Car, L-Type Design, 48" width Deck, 72" outside dimension capacity, 8" bore x 20" stroke Cylinder, 1983
Category: Coil Cars
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Model: CC3
Year: 1983
, ECD Toronto, Canada, Yr.: 1983, Model: CC3, S/N: 492, "L" Type Design, 48" Wide Deck, 72" OD, Approx. 32" Between Centerline of Wheels, Parker Cylinder: Model HB3LLU03, 8" Bore x 20" Stroke.
60000 lb. Automatic Feed Co., Coil Cart w/coil staging storage rack
Category: Coil Cars
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Automatic Feed
, MFG: Automatic Feed Company, Napoleon, OH, Model 607272, S/N: 93078, Yr:, Capacity: 60,000lbs. (OEM can confirm 70,000lbs capable), Lift:, Floor Standing, Self Enclosed Hydraulic Power Unit, Hydraulic lift via hydraulic cylinder, Driven via Hydraulic Motor/s, 48" wide body x 80", 46" from bottom of "V" to floor, 36" ...more
90000 lb. Automatic Feed Co., Coil Cart/Transfer Cart, 48" width x 77" Body, 36" L x 25.5" V-Deck
Category: Coil Cars
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Automatic Feed
, MFG: Automatic Feed Company, Napoleon, OH, Model, S/N: 95547, Yr:, Capacity: 90,000#, Lift:, Floor Standing, Hydraulic lift via hydraulic cylinder, Driven via Hydraulic Motor/s, 48" wide body x 77", Approx. 49" from bottom of "V" to floor, 36" long x 25.5" "V" deck ...more
60" x .25" Lee Shaffer, End Joiner, 64" L Welding Platen, 42" Passline
Category: Coil End Joiners
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Lee
, -Lee Shaffer Coil End Joiner:, S/N: 28072, Capacity: 60" x 0.250", Welding Platen: 64" Long, Weld Clamp Station with Dual Weld Clamp Pads, Weld Carriage Rides on Precision Screw Shaft, driven by Vari-Speed DC Motor., Exit Passline Roll, Controls for:, Left Weld Clamp Open / Close, Right Hand Weld Clamp Open / Close ...more
66" x .1" Behlen Behlen stitcher/coil end joiner
Category: Coil End Joiners
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Behlen
MFG: BEHLEN, Model:, S/N:, Year:, Capacity:.100" Stainless Steel, Pass Height 48", Die No.: 54(65.5" total length), 50hp, 230/460V., 3ph, 60hz. 110V. controls, more info to follow.
50000 lb. Automatic Feed Co./Wean Ind., Feed Line, 22"-26" ID & 24"-72" outside dimension Coil, 24"-84" width, 300 FPM
Category: Coil Feed Lines
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
, MFG: Automatic Feed Compnay, Nepoleon, OH, MFG: WEAN Industries, Year: 1988, 50,000lbs Max. Coil Weight Capacity, Coil ID: 22-26", Coil OD: 24" Min. 72" Max., Width: 24" Min.-84" Max., Line Speed 300FPM, Consisting of:, Automatic Feed Co. Double Expanding Mandrel Reel/Uncoiler & Coil ...more
80000 lb. Wean, feed equipment, 22"-26" ID & 24"-72" outside dimension coil, 24"-84" W, 300 FPM, 1988
Category: Coil Feed Lines
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Wean
Year: 1988
, MFG: WEAN Industries, Year: 1988, 80,000lbs Max. Coil Weight Capacity, Coil ID: 22-26", Coil OD: 24" Min. 72" Max., Width: 24" Min.-84" Max., Line Speed 300FPM, Material as ordered: Mild, CR, EC & Galv.,.020" to.060" at 84" wide & 060" to.125" at 24", wide, Consisting of:, 4 Position Coil Staging Cart, SO: ...more
Coil Handling - Miscellaneous
7 Results
60" Rowe, Pinch Rolls, 60" x 0.25" capacity, 60" face x 7" diameter Rolls, 62.5" between housings, 43" Passline, 25 HP, 500 V
Category: Coil Handling - Miscellaneous
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Model: 60 ROWE
, Rowe Pinch Rolls:, -Capacity: 60" x 0.250", -60" Face x 7" Dia. Rolls, -62.5" Between Housings, -Air Cylinder Loaded, -25 HP DC Motor with Blower, 1750 RPM, 500V, Less Solid State Drive, -In-Line Gear Reducer, -Passline: 43", -Overall Size: 157" L x 18" W x 63" High.
Braner, Edge Guides, 60" width x .25" Material capacity
Category: Coil Handling - Miscellaneous
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Model: BRANER
, 60" wide x.250" material.
Pro-Eco, Pinch Roll & Edge Guide Unit, was used on 60" width Slitting Line, 6" diameter x 62" face Pinch Rolls, 75" L x 23" width Base Plate, 230/460 V
Category: Coil Handling - Miscellaneous
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Model: PRO-ECO
, Was used on a 60" Wide Slitting Line, -Entry Passline Roll, -Entry Pinch Rolls, 6" Dia. x 62" Face Width, Hyd. Cylinder Loaded, 2 HP Dayton R.A. Gear Motor Driven, 1720 RPM, 230/460 V, -Entry Side Guides, Manual Adjustment, -Size of Floor Mounted Base Plate: 75" L x 23" W, -Overall Size: 97" L x 40" W x 65" High ...more
Self Standing Snubber w/Peeler Table, 12" diameter Snubber Roll, 56" Pass height
Category: Coil Handling - Miscellaneous
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Model: SELF STANDING SNUBBER W/PEELER TABLE
, MFG: ?, Self Standing Snubber with Peeler Table, Driven Hold down Roll-missing hydraulic motor: 12" dia. Snubber, Roll(Snubber cylinder is 4.5"OD x 28"L), Telescoping Peeler Table(cylinder is 3"OD x 38" long body for, extension)(cylinder for lift is 4.5"OD x 20"L), Approx 56" ...more
Shears, H Sauer & Sons, 54" blade length, 42" pass height, single rate design, (2) 6.5" diameter hydraulic cylinders
Category: Coil Handling - Miscellaneous
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: H Sauer & Sons
Model: SHEARS
, MFG: H Sauer & Sons, 54" Blade length, 42" Pass height, Single rake design, Two 6.5" dia. Hydraulic cylinders, 8'L x 36"W x 80"H 5000lbs.
TPM, Outboard Support, for Mandrel Type Uncoilers, raises from 10000-20000 lbs. Uncoiler capacity, 4" diameter Horn
Category: Coil Handling - Miscellaneous
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Model: TPM
, MFG: TPM, Brampton, ON, Can raise Uncoiler Capacity from 10,000-20,000lbs, For use on Manrel type uncoilers, Floor mount Arm raises vertical to horizontal position for support of, Mandrel, Approx 58" from Centerline/Pivot of support arm to longest part/front, of base. Approx 48" to shorter part/rear of ...more
Uncoiler Hold Down-Self Standing, Red Bud, .375"capacity, 2012
Category: Coil Handling - Miscellaneous
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Red Bud
Model: UNCOILER HOLD DOWN-SELF STANDING
Year: 2012
MFG: Red Bud Industries, yr. 2012,.375" Capacity, Hydraulically Driven Hold Down Roll, 3 Hydraulic Cylinders for Actuation/Hold down force.
20000 lb. CM #G-20-10-48, Cady Lifter/Coil Grab, 1997
Category: Coil Lifters/Tongs
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Cm
Model: G-20-10-48
Year: 1997
, MGF: CM, Columbus McKinnon, MFD: 7/1997, Model: G-20-10-48, S/N: 11514 ECM, Capacity 20,000 LBS., Located at our Mack Ave., Detroit, MI Warehouse.
35000 lb. CM #SL351884AF, Cady Lifter/Sheet Lifter, 12' L Runners, 18"-84" Stack width, 40" Gap, 5.75" x 16" Hook Loop, 480/240 V, 1999
Category: Coil Lifters/Tongs
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Cm
Model: SL351884AF
Year: 1999
, MFG: CM Cady Lifter, S/N: 12878EMS, Model: SL351884AF, Year: 10/99, Capacity :35,000 Lbs., 12' Long Runners, 18" Min. Stack Width to 84" Max. Stack Width, 40" Gap(Stack Height), Motorized Open/Close, Head Room: 69.5" from Loop to bottom of unit, 5.75" x 16" Hook Loop, 480/240V, Pendant Control, Ship Weight: 3550 ...more
68000 lb. Allen-Bradley, coil grab w/rotation, 72" x 84" outside dimension
Category: Coil Lifters/Tongs
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Allen-Bradley
Year: 2005
MFG: BRADLEY, S/N: 05135, Year: 2005, Coil Grab w/ Rotation, Capacity: 68,000LBS., Elec.: 460V/3/60, 6amps., Ship Weight less Rack: 6360lbs.
75000 lb. Allen-Bradley, coil grab w/rotation, 72" x 84" outside dimension
Category: Coil Lifters/Tongs
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Allen-Bradley
MFG: BRADLEY, S/N: 05083, Coil Grab w/ Rotation, Capacity: 75,000LBS., Elec.: 460/3/60, 2.1amp, 5740Lbs Ship weight less rack.
132 Ton, Zenar, Transfer Cart, LP Driven, 4-Coil
Category: Coil Transfer Cars
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Zenar
, MFG: Zenar/Milwaukee, Job 1597-0005, 120 Metric Ton/132 US Ton(264,000lbs.), 4 Coil Transfer Cart, LP driven, Ship Weight 40,000lbs, Located at our Mack Ave., Detroit, MI Warehouse.
Conveyor and Pass Through Parts Washer
1 Result
Automatic Feed Co. #2-LPB-7.5-72, Washer, Pull trough design, 82" Housing depth w/80" Faced Rolls, 1988
Category: Conveyor and Pass Through Parts Washer
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Automatic Feed Co
Model: 2-LPB-7.5-72
Year: 1988
Dross Cooler, complete, carts, lift & shaker, cooling drum, water resevoir, pump, baghouse
Category: Cooling Beds
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Dross
.1" x 46" Butech #CS-250-42, Stainless crop shear
Category: Crop Shears
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Butech
Model: CS-250-42
Year: 1988
MFG: BUTECH, Model: CS-250-42, Year: 1988, Capacity:.100 Stainless 200-400(120,000 PSI Shear), Width: 48" Blade face, Pass Height: 41" on raised base. Shear could be reduced to 15" by removing it from base., Depth: Unit is 18" from front to back, Hydraulically actuated by two cylinders., Shipping dimensions: 72" L x ...more
.5" x 75" Red Bud Industries #SH24-500-72, crop shear, 2012
Category: Crop Shears
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Red Bud
Model: SH24-500-72
Year: 2012
MFG: Red Bud Industries, Model: SH24-500-72, S/N: SHK-11-MO841, Year: 2012, Capacity:.500"(12.7mm) HR, Max. Width: 75" (1905mm), Two shears available. Price is per shear., one shear is an exit with no pinch rolls, one shear is an entry with pinch rolls.
75" Ton, McKay #5516-M, 4-Post Cut-Off, 57" F-B & 26" R-L distance between posts
Category: Cut Off Machines
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Model: 5516-M
MFG: McKay, YEAR: 1968, MODEL: 5516-M, CAPACITY: 75 TON, 4 POST DESIGN, DISTANCE BETWEEN POSTS: 57" FRONT TO BACK, 26" RIGHT TO LEFT, LEMONT MACHINE CO. DIE ACCELERATOR, AIR BLADE RETURN/COUNTERBALANCE, BOW TIE BLADE, HOLDDOWN, AC MOTOR WITH BELT DRIVE TO FLYWHEEL, AIR CLUTCH AND BRAKE.
20.5" x .065" RBI, Cut to Length Line, 4000 lb. power uncoiler, 24" feed length, 30 HP pump
Category: Cut-to-length Lines
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Rbi
, RBI MODEL RM-24-10, 4,000Lb. CAPACITY POWER UNCOILER, S/N 80-60105 (NEW 1980) W/24" WIDTH, HYDRAULIC, EXPANSION, 30HP HYD. PUMP, RBI MODEL CC15 4,000Lb. COIL CAR, S/N CCE80-60105, RBI MODEL CM220 20.5" x.065" STOCK STRAIGHTENER(No longer available), S/N SSK79-60088, RBI MODEL FHF6S20-24 STOCK FEEDER, S/N FK79-60087 ...more
60" x .25" Rowe, Cut-To-Length line components, L-R direction, 20"-24" coil ID, 7" dia. x 60" face pinch rolls, 1993
Category: Cut-to-length Lines
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Rowe
Year: 1993
, MFG: ROWE, Year: 1993, (SOLD) Rowe Uncoiler: $54,500.00, Model: 50060-DSJ, -Capacity: 50,000# x 60", -4 Leaf Pumpkin Tooth Mandrel Design, -Hydraulic Wedge Type Mandrel Expansion, -20" - 24" Coil I.D. Range, -Hydraulic Slide Base, -Attached Powered Holddown Roll, 36" W x 10" Dia. Rubber Covered Roll, -Max. Coil ...more
74" x .375" Automatic Feed Co. #74-240, Cut-To-Length line Stacker, 12"-240" material length, 18" max stack height, 1976
Category: Cut-to-length Lines
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Automatic Feed Co
Model: 74-240
Year: 1976
, MFG: Automatic Feed Co., Napoleon, OH, Model: 74-240, S/N: 3684-102576, 1976, 18" Min. to 74" Max. Material Width,.060"-.375" Material Thickness, 12" Min.-240" Max. Material Length, 18" Max. Stack Height.
74" x .375" Herr Voss, Cut-To-Length line, 60000 lb.
Category: Cut-to-length Lines
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Herr Voss
74" x 0.375" x 60,000# Herr Voss Cut To Length Line, -36" to 74" Wide -60,000 lbs., Coil Weight -0.075" to 0.375" Thick (at 80,000 PSI Yield), -20" to 34" Coil I.D. Range, -84" Max. Coil O.D., -50 FPM Jog Speed-20 to 175 FPM Line Speed, -Left to Right Line Direction Consisting of the following:, -Entry Coil Ramp: 3 ...more
6000 lb. x 60 outside dimension, Braner, Downlayer, 3.5" diameter x 61" face Rolls w/1.06" Hex., 16" L Coil Horn, 34.5" H x 63" L Pass size, 440 V
Category: Downlayers
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Braner
, MFG: BRANER, S/N: 5307, 6,000# capacity, 61" Roll Face, 3.5" dia. Rolls with 1 1/16" Hex., 16" Long Coil Horn, 2 Cylinders for lift, 34.5" Pass Height x 63" Length, Approx. 43.5" Floor to top of Horn, Electrics: 440/3/60.
6000 lb. x 60 outside dimension Pro-Eco, hydraulic downlayer, powered conveyor, 15" horn
Category: Downlayers
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Pro-Eco
, MFG: PRO ECO, 6,000lbs. Capacity, 38.5" Pass Height, 3.5" dia. rolls x 60.5 face & can overhang on one side, Rolls are on 6" centers, Unit is 63" long, Horn is approx. 46" from floor to top of horn.
10000 lb. x 72 outside dimension Braner, 74.75" Roll Face, hydraulic downlayer, In Line Design, Pick-n-Place
Category: Downlayers
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Braner
, MFG:, 10,000lbs capacity, 72" max. Coil OD, In Line Design, 74.75" Roll Face, 3.5" dia. rolls, 6.5" center to center roll distance, Shaft size, 41.5" Pass height, Approx. 67" from floor to top of horn, 88"L x 85"W x 48" H.
10000 lb. x 72 outside dimension Braner, Downlayer, 3.5" diameter x 76" face Rolls on 6.5" Centers, 81" L Table, 5" width x 8" H x 19" L Horn
Category: Downlayers
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Braner
, 10,000# capacity, Has Pick and Place capability, Hydraulically powered conveyor rolls, 3.5" dia. x 76" face rolls on 6.5" centers, 1 3/8" Round shafts, 81" table length, 36.75" conveyor pass height when lowered, 61.75" from floor to top of horn when raised, 5" wide x 8" ...more
Rowe, Edge Trimmers, 60" x 0.25" cap., 64" max width, 42" passline
Category: Edge Trimmers
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Rowe
, Rowe Edge Trimmers:, -Capacity: 60" x 0.250", -Double-Stub Design, -64" Max. Width, -Powered Width Adjustment, -Entry Edge Guides on (1) Unit, -Passline: 42", -Less Drive Motors, -Overall Size: 165" L x 58" W x 52" High, -In Storage: Toledo, Ohio, -Note: (2) Units Available, each at below listed price.
Memco #M50/75, 50" embosser with rolls
Category: Embossing Machines
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Memco
Model: M50/75
Chicago Blower, Size 15
Category: Fans
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Chicago
, MFG: Chicago Blower, sn: 140379, Size 15.
Gearboxes (Gear Reducers - No Driving Unit)
2 Results
100 HP @ 426/741 RPM, Nuttall, Reducer, Parallel Shaft, 2.78:1 Ratio, 2.78 service factor
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Nuttall
, Manufacturers # S7 (95R60676), 2.78 SF, 2.78:1 Ratio, 100 HP, 426/741 RPM, Parallel shaft.
200 HP @ 1180 RPM, Paramax #PX8070-P2-LR-14, Reducer, 14.11 :1 Ratio, 2006
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Paramax
Model: PX8070-P2-LR-14
Year: 2006
, MFG: PARAMAX 9000, Sumimoto Macinery Corp. of America,Chesapeake, VA, Model: PX8070 P2 LR 14, S/N: H6051590, Input HP: 200, Input RPM: 1180, 08 HP Rating at 1180 RPM, Ratio: 14.118:1, Date: 4-06, Never used.
Aurora 1/2 yard Dump Hopper
Category: Hoppers
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Aurora
MFG: Aurora, Capacity: 1/2 Yard, Self Dumping, Heavy welded steel construction, 36.5" wide x 48" Long x 27" High, Quantity of 850 available as they come out of rotation.
1.5 HP Hydraulic Power Unit, w/Reliance Motor, 3 Phase, 50/60 Hz, 3450 RPM, 240/480 V
Category: Hydraulic Power Units
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
, 1.5HP Reliance Electric Duty Master Motor, 60hz:, 240/480 V. 3.5/1.75 AMp., 3450 RPM, 50hz:, 2850 RPM, 3 Phase, Bosh:, FF1 SH MM 01 H 50, 9 810 161 089, P Max 4500 PSI.
3 HP Circuit Pak, Hydraulic Power Unit, w/Baldor Motor, 3 Phase, 1725 RPM, 208-230/460 V
Category: Hydraulic Power Units
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
, MFG: Circuit Pak - Double A, 3HP Baldor AC Motor, 208-230/460 V. 8.5-6/4 Amp., 1725 RPM, 3 Phase, Frame: 56C, S/N: 77L 32565-36, T10V-50-M-N-T-A1.
3 HP Hydraulic Power Unit, w/Baldor, 3 Phase, 50 Hz, 1725 RPM, 190/380 V
Category: Hydraulic Power Units
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
, 3HP AC Motor, 190/380 V., 9.4/4.7 Amp., 1425 RPM, 50Hz, 3 phase, Frame 56YZ, Vickers 233, RS 25 S-AC 10 S50.
5 HP Racine, Hydraulic Power Unit, w/Leroy-Somer Motor, 32" x 16" x 18" Tank, 1730 RPM, 200-230/460 V
Category: Hydraulic Power Units
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Racine
, MFG: Racine, 5 HP Leroy-Somer AC Motor, 200-230/460 V., 15-14.6/7.3 Amp., 1730 RPM, 3 Phase, Parker 1000 LT 0059, PAVC 1610 R2-10, 32" x 16" x 18" Tank Approx 40 Gallons.
7.5 HP Hydraulic Power Unit, w/Lincoln Motor, 3 Phase, 60 Hz, 230/460 V
Category: Hydraulic Power Units
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
, 7.5 HP Lincoln AC Motor, 230/460 V., 20.4/10.2 Amp., 60Hz, 3 phase, Frame: 213T, Bosch: PSV PNSF 10-HRM 52, Mfg. No. 5928715, S/N: 565 121 47101.
15 HP B & K, Hydraulic Power Unit, w/Brook Motor, 36" x 21" x 20" Tank, 1720 RPM, 575 V
Category: Hydraulic Power Units
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: B & K
, MFG: B&K, Brook Electric Motors of Canada, LTD., 15 HP Ac Motor, 575 V., 1720 RPM, 60hz., 3ph, Frame: K254T, 15 Amp., Vickers Pump Model : A7J, PVB20 RS-20 CM11, 36" x 21" x 20" Tank/Resevoir Approx. 65 Gallons.
15 HP Hydraulic Power Unit, w/Westinghouse Motor, 3 Phase, 60 Hz, 1755 RPM, 230/460 V
Category: Hydraulic Power Units
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
, Westinghuse Motor:, 15 HP, 3 ph, 1755 RPM, 230/460 V., 60hz, Vickers Pump:, 380673 K/92/0, PVB20 RS 20 CM 11.
20 HP Hydraulic Power Unit, w/Westinghouse Motor, 46" x 30" x 23" Tank, 28.7 GPM, 1000 psi, 1765 RPM, 230/460 V
Category: Hydraulic Power Units
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
, 20 HP Westinghouse Motor, 230/460 Volts, 50/25 Amp., 1765 RPM, 60hz, 256T Frame, Vickers G 25, Model: PVB29RS-200M11, Pabco Tank: 46" x 30" x 23" Tank. Approx 143 Gallons, PVB 29 displacement 3.76 in3/r x 1765 divided by 231 = 28.7 GPM, 28GPM x 1000PSI divided by (90% of the 1765RPM) 1584"= ...more
25 HP Eastern Hydraulics LTD, Hydraulic Power Unit, w/Eberle Motor, 60" x 27" x 15" Tank, 28.6 GPM, 1000 psi, 1760 RPM, 208/230/480 V
Category: Hydraulic Power Units
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Eastern
, MFG: Eastern Hydraulics LTD, Ref: 161426 03/28/94, Work Order: J0805A, 25 HP AC Eberle Motor, 1760 RPM, 208/230/480 V. 70/65/30 A., 60hz, Frame: C284Tc4, SF: 1.15, Vickers 362032 K/93/0 PVB29 RS 20 C11, 60" x 27 x 15" Tank. approx. 105 Gallons, PVB 29 displacement 3.76in3/r x 1760(RPM) divided by 231 = ...more
25 HP Hydraulic Power Unit, w/Marathon Motor, 37" x 26" x 12" Tank, 1770 RPM, 230/460 V
Category: Hydraulic Power Units
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
, 25 HP Marathon AC Motor Series E, 230/460 V., 60/30 Amp, 1770 RPM, 60Hz, 3 Phase, Frame 284T, 078606060R 11/04/97, 7304 1097, 37 x 26 x 12 tank confirm Approx. 50 gallons.
30 HP Hydraulic Power Unit, w/Lincoln Motor, 48" x 27" x 12" Tank, 29.4 GPM, 1765 RPM, 230/460 V
Category: Hydraulic Power Units
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
, Lincoln Ultimate-E1 Hostile Duty Motor, 30HP AC, 60hz: 1765 RPM, 230/460 Volts, 78/39 Amp., SF: 1.25, 50hz: 1475 RPM, 208/415 Volts, 88/44 Amp., SF: 1.5, Model: 9A AF4P30TC61YL, Vickers: S/N: 33200IA1-5206, Model Code: PVM063ER09LS02AAA 2300000000A, Part #: 02-335585, 48" x 27" x 12" Tank. Approx 67 ...more
60 Ton, ASAI, straight side hydraulic press, 43" x 57" bed
Category: Hydraulic Presses
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Asai
Year: 2004
ASAI, Year: 2004, Capacity: 60 Ton (600kN), Stroke: 20" (510mm), Max. Descending Speed: 10.6"/sec. (270mm/sec.), Daylight: 35" (900mm), Bed Size: 43" (1,100mm) x 57" (1,450mm), Seven available.
40' x 30' x 10' High Mezzanine with staircase
Category: Mezzanine Flooring
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Overhead-Bridge Cranes
2 Results
10 Ton, Kone Cranes, 2-hoists
Category: Overhead-Bridge Cranes
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Kone
MFG: Kone Cranes, Year:, 10 Tons, Span: 49', Height:, Electrics.
40 Ton, Kone Cranes, 29.5' Span
Category: Overhead-Bridge Cranes
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Kone
Year: 2008
MFG: Kone Cranes, Yr: 2008, Model: HHW 15902, Class: H3, 40 ton, Span: 41' 9.5", Lift: 21', Hoist Speed: 10.0/1.6 FPM, Trolley Speed: 65.0 FPM460V./3/60, 43.8 total amp.
Appleton #A301, Core Cutter, 96" Master Core length, 1.5"/3"/6" dia tooling for cores, 3" ID to 13" OD core diameter range
Category: Paper Cutters
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Appleton
Model: A301
, MFG: APPLETON, Model: A301, S/N:, 96" master core length, Tooling for 1.5", 3" & 6" diameter cores, Feed Rack, Feeder & additional Tooling, Appleton A301 Core Cutter Entry Level Automated Core Cutting The, A301 is the ideal model for any company's entry into automated core, cutting. This rugged, yet ...more
Appleton #A400, Core Cutter, 96" Master Core length, 1.5"/3"/6"core diameter capacity, 3" ID to 13" OD core dia range, 440 V.
Category: Paper Cutters
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Appleton
Model: A400
, MFG: APPLETON, Model A400, Two New Units Available, S/N: 051211A is a 3" unit with 6" tooling & sleave, It will come with, a used 3" gripper, which should make it 3" & 6" capable., S/N: 051211B is a 3" unit with 3" tooling & will come with a used 6", gripper but no 6" sleave, to make it 3" and 6" capable ...more
60" Rowe #PT/HD-60, Peeler Table, 60" width x 0.25" capacity, (3) Hydraulic Cylinders
Category: Peelers
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Rowe
Model: PT/HD-60
, -Peeler Table:, Model PT/HD-60, S/N: 28057, Capacity: 60" W x 0.250", (2) Hydraulic Cylinders for Up / Down Movement, (1) Hydraulic Cylinder for In / Out Movement of Peeler Blade, Overall Size: 92" L x 74" W x 43" High.
Power Squaring Shears (Gauge)
1 Result
12 gauge x 3' National Sheet Metal Machines #NH-3612, Hydraulic Shear
Category: Power Squaring Shears (Gauge)
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: National
Model: NH-3612
, MFG: National Sheet Metal Machines, Smartt, TH, Model: NH 3612, S/N: 577-0801, Capacity: 12 GA., 36" Material width, Actual Blade Width:, Pass/Platten/table Height:, Overall Dimensions.
Power Squaring Shears (Inch)
2 Results
.157" x 4' OK Gep #Xome/1.25, Shear
Category: Power Squaring Shears (Inch)
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Model: XOME/1.25
, MFG: OK GEP, Hungary, Model/Type: XOME/1.25, S/N: 5-29-98, Gauge Capacity(Max.):.157"(4mm) mild steel, Max. Width: 49"(1.25M), Actual Blade Width:, Pass/Platten/table Height:, Overall Dimensions.
1/4" x 12' Cincinnati #2500, squaring shear
Category: Power Squaring Shears (Inch)
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Cincinnati
Model: 2500
, MFG: Cincinnati, Inc., Model: 2500, S/N: 46886, 12' Max. Material Width, Max. Gauge Thickness:.250 Mild Steel based on 60,000psi(413,000kPa), Max. Tensil Strength, Squaring Arm, Back Gauge, Missing original CNC controls/touchscreen, Has manual controls via, foot peddal, Elec: 480/3/60, 42.3 Full Amp, Cinci Elec. ...more
72" x .040- 375" Red Bud Cassette Leveler, 250 HP, 7.88:1 ratio
Category: Precision Levelers
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Red Bud
Year: 2012
MFG: BRANER, S/N: LV13113, 72" nominal material width,.040"-.375" gauge range, 2 Cassettes: 72" x 4" dia. work rolls(S/N: LV13114) & 72" x 2.5" work rolls(S/N: LV13115), 250 HP, 650/1950RPM, 7.88:1 Ratio, 7 Flights of Hydraulically adjustable Back ups.
Precision Roller Levelers
5 Results
4.7" x .06" Kohler #12-120-B, Precision Leveler, (19) 5" face x 0.472" diameter Rolls, 0-195 FPM, 5.4 HP, 208 V
Category: Precision Roller Levelers
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Kohler
Model: 12-120-B
, SERIAL #: 30-359 YEAR: 1982, -Model: 12-120-B, -Capacity: 4.72" x 0.004" - 0.060", (120 mm x 0.1 - 1.5 mm), -19 Work Rolls, 9 over 10, 0.472" Dia. x 5" Face Rolls, (12 mm x 127 mm), -Line Speed: 0 - 195 FPM (0-60 MPM), -Main Drive Motor: 5.4 HP (4.05 KW), 3150 RPM, -Lube Pump Motor: 0.75 HP ...more
Herr Voss, Strand Extensioner, L-R direction, 48" x 0.02" -0.075" capacity, (17) 54" face x 1.5" diameter Rolls, 45000 psi, 30-210 FPM, 40 HP, 240 V
Category: Precision Roller Levelers
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Herr Voss
Herr Voss #72/1.156-23/5-HI/RH, Strand Extensioner, R-L direction, 62.5" width x 0.008" -0.04" capacity, (23) 72" face x 1.156" diameter Rolls, 12000-40000 psi, 1500 FPM
Category: Precision Roller Levelers
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Herr Voss
Model: 72/1.156-23/5-HI/RH
, Herr Voss Strand Extensioner 5 HI, -Model: 72/1.156-23/5 HI / RH, -Width Capacity: 62.5" Max., -23 Roll design, 11 over 12, -Minimum Coil Thickness: 0.008", -Maximum Coil Thickness: 0.040" (0.076" depending on recoiler hp), -Maximum Line Speed: 1500 FPM, -Material Yield Strength: 12,000 to 40,000 ...more
66" x 1.5" B & K #1.5-17-66-l-02, Leveler, 1.75" diameter x 5" face Back-Up Rolls, 41.5" Pass height, 150 FPM, 50 HP, 500 V, 1975
Category: Precision Roller Levelers
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: B & K
Model: 1.5-17-66-L-02
Year: 1975
, MFG: B&K, S/N: 101, Model: 1.5-17-66-l-02, Year 1975, 1.5" Diameter Work Roll, 66" Roll Face, 5 Flights of adjustable Back-Ups, 3 Flights are motorized, Back Up Rolls are 1.75" dia. x 5" Face, 41.5" Pass Height, 50 HP DC Motor, 500 V., 1750 RPM, 4.5:1 Ratio, 150 Max. FPM, B&K ...more
78" x 2.25" Automatic Feed Co., cassette leveler, R-L direction, (17) 82.625" face x 2.25" diameter rolls, 54" pass height, 2006
Category: Precision Roller Levelers
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Automatic Feed
Year: 2006
, MFG: Automatic Feed Co., Napoleon, OH, Year: 2006, Work Rolls: 2.25" Diameter x 82.625" Roll Face, 17 Work Rolls, Spiral Groove Intermediate Back ups, 7 total flights of Cam type Back Ups -Up & Down, Motorized wedge design adjustment of the 5 center flights of Back Ups, Interchangeable Cassette Design(one ...more
20000 lb. Stamco, recoiler, 15" dia x 54.5" face drum, bolt-on urethane pads for 19" diameter, hydraulic expansion
Category: Recoilers
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Stamco
, -Recoiler: Stamco, 20,000 lbs capacity, 15" Dia. x 54.5" Face Drum, Bolt-on Urethane Pads for 19" Dia., Hydraulic Expansion, No Gripper Slot, No Pushoff, No Overarm Separator, 100 HP Reliance DC Motor, 850/1700 RPM, 600 V w/Blower, Passline: 42.5" from Floor to Center of Drum, Overall Size: 172" L x 92" W x 81" High.
20000 lb. Strilich #1009, Recoiler, R-L direction, 20" ID x 73.5" face Drum, 9" Shaft, 60 HP, 1997
Category: Recoilers
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Strilich
Year: 1997
, MFG: STRILICH TECHNOLOGIES, Inc., Crown Point, IN, Model: 1009, 1997 Elect Drawing, 20,000lbs Weight Capacity, 20" ID(approx 19" clapsed), 23"? ID(approx 22" clapsed) with Pads(1.5", thick Pads), Drum face: 73.5" with Pads, 77.5" without Pads, Hydraulic Expansion and Grip, Full ...more
40000 lb. Yoder, 64" drum, 20" ID, 125 HP AC motor, ABB drive, 17.42:1 ratio
Category: Recoilers
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Yoder
, Recoiler, S/N: Y5740-770, 40,000# Capacity, 20" ID x 64" face Drum, Manual grip and expansion, Hydraulic push-off, Floor to center line of Drum: 41.5", OD: 72" (44" radius from CL of Drum to Over Arm Shaft, 50" Separator shaft, 125 HP ABB AC motor, 1783 RPM with ABB Drive ...more
60000 lb. Red Bud Industries, recoiler, 72" width, 150 HP, 2012
Category: Recoilers
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Red Bud
Year: 2012
MFG: Red Bud Industries, Model: RC30-80, S/N: RCK11-M0841, Year: 2012, 60,000Lbs Capacity, 72" nominal material width, 150HP Drive Motor, Brad Foote Reducer: 190.1:1, 650/2600RPM, Right to Left mode of operation, The RBI Recoiler's reducer can be altered to speed up the RPM/ FPM. The Bottom Shaft can be removed(1st ...more
Ruesch Recoiler, left to right, 30" face, 16" ID, 72" OD, 7.59:1, manual expansion, 40 HP, 500V.
Category: Recoilers
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Ruesch
14" x 72" Landis, grinder, GE Fanuc Control
Category: Roll Grinders
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Landis
MFG: Landis, Equip. ID #: L 27762, 14" Grinder x 72", 7.5" from bed to center line of spindle, Baldor Motor Vector drive upgrades, GE Fanuc Control Upgrade, Filter, Grinding Wheels, Removed & In Storage.
20000 lb. LTS #WM-10-LGD, Digital Hook Scale, 5 lb. increments, Crossby Hook #45 w/2.25" Opening, 100-240 V
Category: Scales
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Lts
Model: WM-10-LGD
Scrap Choppers
2 Results
Braner, Scrap Choppers, use for 72" width Slitting Line, 0.015"-0.048" thick capacity, 1.5" Scrap width, 900 FPM, 10 HP, 500 V
Category: Scrap Choppers
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Braner
, Braner Scrap Choppers, -Designed for use in 72" Wide Slitting Line, -Capacity: 0.015" - 0.048" Thick with existing 10 HP Drive Motor, -Previously used on 0.075" Thick x 0.500" wide material (Mild Steel), -Max. Scrap Width: 1.5", -(2) Chopper Heads, -Hydraulic Motor Powered Head ...more
Butech, Scrap Choppers, Twin Chopping Heads, 65" x 0.08" capacity @ 80000 psi, 750 FPM
Category: Scrap Choppers
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Butech
, MFG: Butech, -Capacity: 65" x 0.080" @ 80,000 PSI, -Twin Chopping Heads, -DC Motor Driven, -Powered Width Adjustment, -Line Speed: 750 FPM, -In Storage.
Scrap Winders for Coil Handling
5 Results
Loopco, Oscillating Scrap Winder, 24" width x 44" diameter Spool, Hydraulically Driven
Category: Scrap Winders for Coil Handling
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Loopco
, MFG: LOOPCO, S/N: 1075, 24" wide x 44" Diamneter Spool, Hydraulically Driven, Oscillating Design for Level Wind, 77L x 52W x 47H 1500lbs.
Loopco, Scrap Winder, Green Color, 13" width x 44" diameter Spool, Oscillating Design, Hydraulically Driven
Category: Scrap Winders for Coil Handling
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Loopco
, MFG: LOOPCO Industries, Twinsburg OH, No: 968, Oscillating Design for Level Wind, Hydraulically driven, 13" wide x 44" Spool, Shipping Dimensions 56"L x 44" W x 57"H.
Double Oscillating Scrap Winders, 26" width x 33" diameter Spool, 54" face Cross Over Rolls, side dump
Category: Scrap Winders for Coil Handling
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
, MFG:, 26" wide x 33" Dia. Spool, Side dump with hydraulic retraction of side plates, 54" face cross over rolls, 122" L x 90" W x 48" H.
Oscillating Scrap Winder, 13" width x 44" diameter Spool, Hydraulically Driven, Makeshift Guard
Category: Scrap Winders for Coil Handling
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
, Oscillator for Level Wind, 13" wide x 44" dia. Spool, Hydraulically Driven, Makeshift guard, Shipping Dimensions: 44 W" x 54"L x 49"H.
Oscillating Scrap Winder, Yellow Color, 12.5" width x 46" diameter Spool, Hydraulically Driven
Category: Scrap Winders for Coil Handling
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
, Oscillating Design for Level Wind, Hydraulically Driven, 12.5" wide x 46" Diameter Spool, Shipping Dimensions: 52" W x 43" L x 52" H.
Sheet and Strip Straighteners
2 Results
72" x 3" Automatic Feed Co., Straightener, (7) 80" face x 3" diameter Rolls, 150 FPM, 30 HP
Category: Sheet and Strip Straighteners
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Automatic Feed
, MFG: AUTOMATIC FEED COMPANY, Year: 1998, S/N: 98213, 4 over 3 construction, 3" dia. work rolls x 80" face, Entry Pinch Rolls, 150 fpm capable, Has 3 Valves Drive Side, No Motor, Lube Pump, I/O Cabinet(stripped), Paramax 33.876:1 ratio, Motr originallly was a Unico AC Induction motor 30HP/22.4kw, 1745 RPM ...more
80" x 3" Automatic Feed Co., 7-roll, 3" dia.rolls, 4 over 3, 150 FPM
Category: Sheet and Strip Straighteners
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Automatic Feed
, MFG: AUTOMATIC FEED COMPANY, Year: 2003, S/N: A20276, 4 over 3 construction with 3 flights of Back Ups, 3" dia. work rolls x 80" face, Entry, Backed Up, Pinch Rolls, 150 fpm capable, 30HP DC Motor, 1750 RPM with a 30.5:1 ratio Sumitomo 8035-P3-LR, reducer, These units are designed to automotive application ...more
18.5" x 2.6" Ruesch #76, Slitter Head, Removable Head w/Base, Stripper Ring Set Up
Category: Slitters
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Ruesch
Model: 76
, MFG: Ruesch, Model: 76, S/N: N3002 6329, 2 5/8" x 18.5" Face Arbor, Removable head with base, Stripper ring Set up.
18.9" x 2.6" Ruesch #76, Slitter Head, Removable Head w/Base, Stripper Ring Set Up
Category: Slitters
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Ruesch
Model: 76
, MFG: Ruesch, Model: 76, S/N: N3040 6362, 2 5/8" x 18 7/8" Face Arbor, Removable head with base, Stripper ring Set up.
48" Flagler, Sheet Gang Slitter, 48" Material width, 22 gauge Mild Steel, 3 cuts on 22-26 gauge capacity, 60 FPM, 1/2 HP
Category: Slitters
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Flagler
, MFG: Flagler, Detroit, MI, Model: 22ga. GS-348, S/N: GS.348.434.382, 48" material width, 22ga. mild steel, Capacity: Slitter, 3 cuts on 22 to 26 Ga., Beader, 3 beads on 22 to 26 Ga., Speed: Approx. 60 feet per minute., Motor: 1/2 HP 115/1/60/60 RPM, Ratio: 28.6:1, Penta Power Multi-Drive DC Speed Control ...more
54" x 7.5" Loopco, slitting heads, drop in type, 100 HP, 500 V.
Category: Slitters
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Loopco
, 54" LOOPCO SLITTING HEADS, LOOPCO ENTRY UNIT consisting of, Peeler Table, Pinch Rolls, Side Guides, Crop Shear-S/N: 6458E 12908, Drop In Type Slitter Head- Single Eccentric design, Model GII 7.5x52 L slitter, S/N: 6458E 12910-B. 7.5" Diameter Arbors, 55.5" Face Arbor Length, Comes with 3 sets of Shimmed Tooling& ...more
60" x 8" Delta head
Category: Slitters
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Delta
, 60.5" Face, 8" dia. Arbor, Parallel adjustment, No tooling, Pinion Stand available at additional price, Morse over running clutches, model MG-750, Part # 604 603.
72" x 9" Paxson, Slitter Head System, (2) Drop In Style Heads
Category: Slitters
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Paxson
MFG: PAXSON, 2 Drop in style Heads with base, Arbor Dia.: 9", 75 HP Reliance DC Motor, 650/2100 RPM, 500 V, recently rebuilt.
Asko, Slitter Knives, 7.5" ID & 11" outside dimension, 1" width x 0.5" deep Keyway, (78) 0.248" thick & (2) 0.5" thick Knives
Category: Slitters
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Asko
, MFG: ASKO, 7.5" ID, 11" OD, 1" wide x.5" deep keyway, Qty: 78-.248" thick, Qty: 2- nominal.500" thick.
Askodyne #K-27478, Slitter Tooling, (172) 4" ID & 8" outside dimension Knives w/0.125"-0.48" thickness range, 0.75" width x 0.5" deep Keyway
Category: Slitters
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Askodyne
Model: K-27478
, These knives are NEW and run between 80.00 & 125.00 per piece from the, manufacturer x 172, pieces = $17,630.00+. We are offering the whole set for 60% of, New at $10,578.00, Mfg: ASKODYNE, Model: K 27478, Knife ID: 4.00", Knife OD: 8.00", 52 @.4800" thick, 34 @.2400", 31 @.1250", 25 ...more
Askodyne #K-27478, Slitter Tooling, (172) 4" ID & 8" outside dimension Knives w/0.125"-0.48" thickness range
Category: Slitters
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Askodyne
Model: K-27478
, Mfg: ASKODYNE, Model: K 27478, Knife ID: 4.00", Knife OD: 8.00", 52 @.4800" thick, 34 @.2400", 31 @.1250", 25 @.1400", 30 @.1840".
Slitter Tooling, 6" diameter Arbor, Jet Nuts, Spacers
Category: Slitters
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
, Qty. 2 - Jet Nuts, Qty. 2 - 3'4" thick End spacers, Qty. 2 - 7.5" Long Tappered Aluminum End Cap for loading & protecting, thr threads of the arbors, SPACER:, ID:, OD:, Qty. 35 -.065" Spacers, Qty. 17 -.125" Spacers, Qty. 56 -.100" Spacers, Qty. 29 -.250" Spacers, Qty. 23 ...more
12" Amermac #1100, Stripper Ring Lathe, 12" width x 5.5"/6.5"/7.5"/8.5"/9.5" diameter Mandrels, 1/3 HP, 110 V
Category: Slitting Lines
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Amermac
Model: 1100
, MFG: AMERMAC, Model: 1100, S/N: 155, Model 1100 Stripper Ring Lathe, 12" wide Mandrels, 5.5", 6.5", 7.5", 8.5", 9.5" diameter Mandrels, GE drive motor, 1/3 HP, 110V., 1PH, 60hz, 1725 RPM, 15.3 Amps, With thirty years experience in the manufacture and marketing of tire, truing equipment ...more
18" x 2.875" Ruesch, 3000 lb., 25 HP, steel stripper rings
Category: Slitting Lines
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Ruesch
18" x 2.9" Ruesch, Slitting Line, 6000 lb. capacity, 28" face Uncoiler, 36" Deck Lift Cart, 16" ID Recoiler
Category: Slitting Lines
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Ruesch
, MFG: RUESCH, Uncoiler, Model: N3022B S/N: 6195, 6,000# capacity, 28" face, Slide Base, Hydraulic Expansion, 12" dia. to 16" ID with pads, Lift Cart: 36" Deck, Guild Butt end Welder, Roll type Crop Shear, Edge Guides: 22: Max. Opening, Slitter heads(Two), Model: N3022E S/N: 6195 model 149 heads ...more
24" x 5" Stamco, Slitting Line, 20000 lb. capacity, 28" face Mandrel Uncoiler, 20" diameter x 32" face Drum Recoiler, 20 HP, 230/460 V
Category: Slitting Lines
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Stamco
, MFG: STAMCO, -Uncoiler:, Hydraulic Expansion, 16" - 20" Coil I.D. range, 4 Segment Mandrel, 28" Mandrel face width, Powered Holddown Roll, AC Motor thru Reducer, Sliding Base, 2 speed Gearbox, 60 HP GE DC Motor, 500/2000 rpm, 240 v, Hyd power unit for edge control, -Entry Coil Flattener:, 5 Work ...more
41" x 6" Georg #KS160/250-1000W, Slitting Line, R-L direction, 15000 lb. capacity, 16"-19" ID x 55" OD x 2"-41" W coil, 660/260 FPM, 1980
Category: Slitting Lines
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Georg
Model: KS160/250-1000W
Year: 1980
, MFG: GEORG, YEAR: 1980, Model: KS160/250-1000W, Materials: GO, GNO, Copper, Alum., Silicon Steel, Min./Max. Coil Width: 2 - 41" (Trimmed), Thickness Range: 0.006" - 0.018" (GO/GNO), 0.005" - 0.100" (Copper, Alum.), Width Tolerance: +/- 0.001", Max. Shear: 14,000 PSI (Alum.), 23,000 PSI (GO/GNO), 81,000 PSI (GO/GNO) ...more
54" x 7.5" Loopco, Slitting Line, 30000/20000 lb. capacity, 60" face mandrel uncoiler, 56" recoiler
Category: Slitting Lines
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Loopco
54" x 8" Stamco Double Loop Slitting Line, 35000 lb.
Category: Slitting Lines
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Stamco
MFG: Stamco, Year: 1995, SO: 25-95-7, S/N: 4865, Width: 54", Weight: 35,000 lbs., ID Range: 16" - 20" - 24", Coil OD: 72" max., Gauges Processed: 0.010" - 0.100", Line Direction: Right to Left, Line Speed: 500 and 1200 FPM, Shear Strength: 156,000-170,000 PSI, Consisting of the following:, -4 Arm Entry Turnstile: ...more
72" x 9" Paxson Slitting Line, 60000 lb.
Category: Slitting Lines
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Paxson
72" wide material, 60,000Lbs capacity, 20" ID, 72" OD, Left to Right Mode of Operation, Coil Car: L&M Equip. S/N-12415-1, 50,000 LBS max. Capacity, 44" Deck, 72" OD, 20" from bottom of "V" to Floor, Paxson Cone Uncoiler, Slide Bases, 57" from Floor to CenterLine of Cones, Whichita Brakes, one on each Mandrel ...more
102" x .55" SMS slitting line components, 90000 lb.
Category: Slitting Lines
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Sms
102" x.550" x 90,000lbs., MFG: SMS, Yr: Late 1990's, Gauge:.080" Min.-.550 Max., Material Width: 102" Max., Coil Weight: 90,000lbs. Max., Coil ID: 20" & 30", Coil OD: 40" Min.-72" Max., Line Speed(FPM): 45Max, Entry Coil Cart, Uncoiler, 90,000lbs. Max. Weight Capacity, Coil ID: 20" & 30", Coil OD: 40" Min.-72" ...more
Squirrel Cage AC Electric Motor
7 Results
25 HP 1175 RPM Toshiba, AC Motor, Frame 324T, 6-Pole, 60 Hz, 33 Amps, 460 V
Category: Squirrel Cage AC Electric Motor
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Toshiba
Frame: 324T
, MFG: Toshiba Co., Japan, 25 HP AC (18.5Kw), 6 poles, 460 V., 33 Amp., 1175 RPM, 60Hz, Frame: 324T, SF: 1.0, S/N: 30897335, Bearing: 6312ZZ.
60 HP 1175 RPM Toshiba 33 amp., 3 Phase AC
Category: Squirrel Cage AC Electric Motor
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Toshiba
MFG: Toshiba Corp., Japan, 60HP AC, 33 amp., 1175 RPM, 3 Phase, Frame.
150 HP 1190 RPM A.O. Smith/Century, Industrial AC Motor, Frame 449T, E-Plus Series, 3 Phase, 60 Hz, 1.15 service factor, 162 Amps, 460 V
Category: Squirrel Cage AC Electric Motor
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Frame: 449T
, MFG: A.O. SMITH / CENTURY, AC Motor, E-Plus Series, Cat. No: E843, Part: C-393105-60, Frame: 449-T, HP: 150, Volts: 460, Freq.: 60, Amps: 162, RPM: 1190, Phase: 3, Enc. EF, Ambient/Ins.: 40 deg. F, Drv. Brg.: NU318C3, Opp. Drv. Brg.: 6318C3, NEMA Design: A, NEMA Nom. Eff.: 95.8, Duty: Cont., SF: 1.15, Code: H, Nom. ...more
150 HP 2340 RPM Reliance, AC Motor, Frame L3203, 3 Phase, 40/60 Hz, 1 service factor, 203 Amps, 400 V
Category: Squirrel Cage AC Electric Motor
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Reliance
Frame: L3203
, MFG: Reliance, 150 HP "RPM" AC Motor, 60 hz.:, 400V. 203 Amp., 2340 RPM, 40Hz.:, 400V., 207 Amp., 1170 RPM, 3 Phase, SF: 1, Frame: L3203, S/N: 63KL513815, Bearing: 858C02J30X.
200 HP 1195 RPM A.O. Smith/Century, Industrial AC Motor, Frame 449T, E-Plus Series, 3 Phase, 60 Hz, 1.15 service factor, 243 Amps, 460 V
Category: Squirrel Cage AC Electric Motor
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Frame: 449T
, MFG: A.O. SMITH / CENTURY, E-Plus. Speed Engineered. Inverter Duty Motor., AC Motor, E-Plus Series, Cat. No: E889, Part: C-393109-60, Frame: 449-T, HP: 200, Volts: 460, Freq.: 60, Amps: 243, RPM: 1195, Phase: 3, Enc. EF, Ambient/Ins.: 40 deg. F, Drv. Brg.: NU319C3, Opp. Drv. Brg.: 6318C3, NEMA Nom. Eff.: 95.8, Duty: ...more
250 HP 1192 RPM A.O. Smith/Century, Industrial AC Motor, Frame 449T, E-Plus Series, 3 Phase, 60 Hz, 1.15 service factor, 297 Amps, 460 V
Category: Squirrel Cage AC Electric Motor
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Frame: 449T
, MFG: A.O. SMITH / CENTURY, AC Motor, E-Plus Series, Cat. No: N842, Part: C-393076-60, Frame: 449-T, HP: 250, Volts: 460, Freq.: 60, Amps: 297, RPM: 1192, Phase: 3, Enc. TEFC, Ambient/Ins.: 40 deg. C, Drv. Brg.: NU319, Opp. Drv. Brg.: 6318, NEMA Design: B, NEMA Nom. Eff.: 95.4, Duty: Cont., SF: 1.15, Code: G, Nom. ...more
300 HP 1195 RPM A.O. Smith/Century, Industrial AC Motor, Frame 449T, E-Plus Series, 3 Phase, 60 Hz, 1.15 service factor, 370 Amps, 460 V
Category: Squirrel Cage AC Electric Motor
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Frame: 449T
, MFG: A.O. SMITH / CENTURY, AC Motor, E-Plus Series, Cat. No:, Part: C-393192-60, Frame: 449-T, HP: 300, Volts: 460, Freq.: 60, Amps: 370, RPM: 1195, Phase: 3, Enc. TE, Ambient/Ins.: 40 deg. C/F, Drv. Brg.: NU319, Opp. Drv. Brg.: 6318C3, NEMA Design: G, NEMA Nom. Eff.: 95.8, Duty: Cont., SF: 1.15, Code: G, Nom. PF: ...more
IHI, Stamping Press Bolster, T-Type Design, 186" x 108 ", 1987
Category: Stamping Lines
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Year: 1987
, MFG: IHI, S4600-186x108, S/N: 1511-470, Year: 1987, 186" x 108", T-Type Design.
Straight Side Double Crank (Single Action) Press Machines
3 Results
100 Ton, Minster Piece Maker #P2-100, 2.5" STROKE, 16" sh, 42" x 38" bed, 80-350 SPM
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Minster
Model: P2-100
MFG: MINSTER, Model: P2-100, S/N: P2-100-26688, Strike: 2.5", Shut Height: 16, Strokes per Minute: 80-350, Bed Size: 42" x 38", Electrics.
300 Ton, Bliss #SE4-300-120X84, 6" stroke, 28" Shut Height, 10" adjustment, 20-60 SPM, S/N 30165-1
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Bliss
Model: SE4-300-120X84
, 300 Ton BLISS Press, SE4-300 120 x 84, S/N: 30165-1, 300Ton, 6" Stroke, 28" Shut Height, 10" Adjustment, 20-60 SPM, Windows: 75.5" wide x 27", Bump Style Straight Cut Die, Removed & in storage.
300 Ton, Verson #SE4-300-108-84, straight side double crank, 24" stroke, 60" Shut Height, 20 SPM, 10" ram adj., 1990
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Verson
Model: SE4-300-108-84
Year: 1990
, MFG: VERSON, Model: SE4-300-108-84, S/N: 28910, Year: 1990, Tonage: 300, Bolster Size: 108" x 84", Stroke: 24", Stroke Per Minute: 20, Shut Height: 60, Ram adjustment: 10, Removed from Service and in Storage in Battle Creek, MI.
Strapping Machines and Case Tapers
1 Result
Brainard, Combination Strapping Tools, 3/4" wide Strapping capacity, 0.025"/0.031" Strap thickness
Category: Strapping Machines and Case Tapers
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Brainard
, Brainard model 2FPNSLA-3425, Titan Sealless Combination Strapping Unit, 3/4" wide strapping, pre adjusted for.025 max. strap thickness, Unit tightens, seals, and cuts-off strap, No seal required; unit crimps strapping, one unit available, Brainard model FPNHSOM34, 3/4" wide strapping, Push type(manually ...more
52" x .137" Stamco, Roll Type Tension Stand, (2) Tension Rolls, (2) Spare Tension Rolls, (1) Spare Bridle Rolls
Category: Tension Stands
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Stamco
, MFG: STAMCO, Mach. No.: 4436, Sale No.: 372 83 7A,.010-.137" Mild Steel Capacity, Roll Face:, Pass Height:, Hydraulic Clam-shell Opening, Track Mounted Separator Shaft, Combination Drag Pad with Rotary Tension, Two (2) 3M Checkered Tension Rolls (one set in machine), Exit Pass-line Roll, Two (2) Spare 3M ...more
52" Alligator, Drag Board Tension Stand, 52" diameter x 53" face Pinch Rolls, 60" width Drag Board, 41.5" Pass height, 3.5" diameter Tooling bar
Category: Tension Stands
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
, MFG:, 60" wide Drag board length, 41.5" Pass Height, Entry Pinch Rolls: 8" dia. x 53" face. Upper roll is coated, Bottom, is steel, 3.5" dia. tooling bar, Depth is approx. 41" less the catenary table which adds 14.5", Separator Shaft/Tooling Bar: 3.5" dia. x 42" Long ...more
60" Loopco, Drag Board Tension Stand, 58.5" Pass height, 67" between side frames, 60" diameter x 6.5" L Cylinders w/ 1.25" diameter Rod
Category: Tension Stands
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Loopco
, MFG: LOOPCO Industries, S/N: 710 J 6404 A, 67" Between Side Frames, 58.5" Pass Height, Three Up acting Miller brand Cylinders 7" dia. x 6.5Long with 1.25", dia Rod, 3000lbs ship weight.
72" x .375" Red Bud Industries, drag board tension stand, 2012
Category: Tension Stands
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Red Bud
Year: 2012
MFG: Red Bud Industries, Model:, S/N:, 76" board face,.375" max Gauge Capacity, Pass height, Drag Board Design, Multiple air bags for optimal control, No tooling bar, but can be added.
20000 lb. 4-Arm turnstile, 74" effective length of arm
Category: Turnstiles
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
MFG: Unknown at this time, Model, S/N:, Believed to be at least 20,000Lbs. capacity, 74" effective length of each arm, 54" from floor to top of arm, Can handle 16" ID coils5.25" wide x 8.5" Deep channel for "C" Hook use., Approx. 111.5" radius from center to end of arm.
50000 lb. Automatic Feed Co., 72" 2-arm turnstile, channeled arms for C-hook use
Category: Turnstiles
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Automatic Feed
, MFG: AUTOMATIC FEED COMPANY, Napoleon, Ohio, Model: 507272, S/N: 96093, Capacity: 50,000# per arm, 20" ID (18.5"physical dim. corner to corner), Channelled for C-hook use: 9.25" wide x 13" deep, Aprox. 89.5" from floor to top of Arm, Aprox. 98" radius swing, 60" x 60" square ...more
50000 lb. Automatic Feed Co. #507272, 2-Arm Saddle Turnstile, 20 ID capacity, 98" Radius swing, 60" x 60" Base Plate
Category: Turnstiles
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
, MFG: AUTOMATIC FEED COMPANY, Napoleon, Ohio, Model: 507272, S/N: 94278, Capacity: 50,000# per arm, 20" ID (18.5"physical dim. corner to corner), Channelled for C-hook use: 9.25" wide x 13" deep, Aprox. 89.5" from floor to top of Arm, Aprox. 98" radius swing, 60" x 60" square ...more
60000 lb. Red Bud Industries, 4 arm entry turnstile
Category: Turnstiles
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Red Bud
MFG: Red Bud Industries(RBI), 60,000lbs max. capacity per arm, 42" Stub Arms for use with 72" max width coils, 78.5" from Floor to top of arm, Arms channeled for C-Hook Use.
Uncoilers and Centering Coil Reels
23 Results
4000 lb. Georg, Double Uncoiler, 10" width Mandrel, 16"-20" ID, 7 HP, 440 V
Category: Uncoilers and Centering Coil Reels
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
, MFG: Georg, 10" wide Mandrel, Hydraulic Expansion, 16-20" ID, 37" from Floor to Center Line of Drum, There are two mandrels that rotate to unwind position, AC Driven: 5.5 kw(7 HP), 440 V., 11.3 amp., 1160 RPM, 60 hz., Rotation Servo Motor: 1.1 kw(1 HP), 440 V., 6.3/3.65 amp, 800/5.3 RPM, 60 hz, There ...more
6000 lb. Press Room Equipment #PR-486000-DCT-RAS, Uncoiler, 54" Mandrel face, 16-20" ID, 72" outside dimensions, 3 HP, 240 V
Category: Uncoilers and Centering Coil Reels
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Press Room Equipment
Model: PR-486000-DCT-RAS
, Mfg: PRE Press Room Equipment, Springfield, MO, Model: PR-486000-DCT-RAS, S/N: 0500-053, Weight Capacity: 6000lbs, 54" Mandrel Face, 16-20" ID, Floor to Center Line of the Mandrel: 47.75", Hydraulic Expansion of mandrel, 72" OD, Controls for Waddington Electronics "Sona Trol", 240 Volt ...more
8000 lb. HMI, Double Mandrel Coil Reel, 16"-20" ID x 72" outside dimensions x 12" width Coil
Category: Uncoilers and Centering Coil Reels
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Hmi
, Price is for one unit only. See terms below for multiple unit discount, of 10%, MFG: HMI, Year: New, Capacity: 8,000 lbs per mandrel, Coil Width: 12" max., Coil ID: 16-20" nominal, Coil OD: 72" max., Design:, -Double Ended construction, -Heavy welded steel construction, -Manual Mandrel Expansion via ...more
10000 lb. Coe Press Equipment #CPR.DE.PO-10030, Double End Reel w/ Cart, 18"-22" ID x 72" outside dimensions x 24" width Coil, 3 HP, 208/230/460 V
Category: Uncoilers and Centering Coil Reels
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Coe Press Equipment
Model: CPR.DE.PO-10030
, MFG: COE Press Equipment, Model: CPR.DE.PO 10030, S/N: 6397.4, 10,000lbs Capacity, 24" Max. Width of Coil, 18-22" ID Range, 72" OD, Hydraulic Expansion, Floor to the Center Line of Mandrel: 66", Feed Up Drive, Brake, Powered Rotation between Mandrel "A" & Mandrel "B", Powered locking Pin, Attached Monarch Brand ...more
20000 lb. Strilich Technologies, Uncoiler, 66" Mandrel face, 20" ID
Category: Uncoilers and Centering Coil Reels
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Strilich
, MFG: Strilich Technologies, Inc. Crown Point, IN, 20,000lbs Weight Capacity, 66" Face Mandrel, 20" ID. Originally 16-20" ID- Could be a taken back to a 16" ID if, the Pumpkin Tooth leaves, were removed from the originals(bolted & tack welds), Hydrailic Expansion, 51" from floor to Center ...more
20000 lb. Wean, Uncoiler, 30" face, 16" ID
Category: Uncoilers and Centering Coil Reels
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Wean
, MFG: WEAN, 20,000# capacity, 30" face, 16" ID, pads for 20", Hydraulic expansion, Wichita brake, Slide base, 46" from floor to center line of mandrel, Base size: 6' wide x 9' long(not including the 30" mandrel).
30000 lb. Alcos #SMU-30-K-60, Uncoiler, 4-Segment Pumpkin Tooth Design, 62" Mandrel face, 15.5"-20.5" Hydraulic Expansion, 5 HP, 230/460 V
Category: Uncoilers and Centering Coil Reels
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Alcos
Model: SMU-30-K-60
, MFG: ALCOS, Model: SMU-30-K-60, 30,000# Capacity, 62" Mandrel Face, 15.5-20.5" Hydraulic Expansion of Mandrel, 4 Segment Pumpkin Tooth Design, 5 HP 230/460V AC Motor threading Drive, Slide Base, Eaton 218WCB Air Brake, Hold Down Roll 60" OD due to Hold down placement which can be changed, to increased, 42" from ...more
30000 lb. Automatic Feed, 67", mandrel design, slide base, 16"-20" ID with cart
Category: Uncoilers and Centering Coil Reels
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Automatic Feed
, MFG: AUTOMATIC FEED Co., Model: 306060, S/N: 3310, 30,000# Weight Capacity, 67" Mandrel Length, 16"-20" ID, Hydraulic Expansion of Mandrel, Slide Base, Coil Cart, Hydraulic Feed-up Motor, Air Actuated Brake.
30000 lb. Cincinnati Inc., Mandrel Uncoiler, 60" Mandrel face, 16"-20" ID x 72" outside dimensions
Category: Uncoilers and Centering Coil Reels
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Cincinnati
, 60" x 30,000 lbs. CINCINNATI INC. MANDREL UNCOILER, MFG: CINCINNATI INC., Model:, S/N: 6458E 12910A, S/N: HDR-787 & HDR-788, 30,000 lbs. Max. Weight Capacity, 60" Mandrel Face, 16"-20" ID, 72" OD(42" from CL of Mandrel to over arm shaft), Full Length Hold Down, Slide Base, Wichita Brake, 50" Floor to CL of ...more
30000 lb. Automatic Feed Co. #306060, Mandrel Uncoiler, 60" max Material width, 20-24" Coil ID
Category: Uncoilers and Centering Coil Reels
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Model: 306060
, MFG.: Automatic Feed Company, Napoleon, OH, Model: 306060, S/N: 3310, 30,000Lb. Capacity, 60" Max. Material Width, 20"-24" Coil ID, Hydrauic Expansion, Hydraulic Feed-up drive, Slide Base, Air actuated Brake, Shipping: 79"W x 114" L x7.5'H Weight: 13,600 lbs, Coil Cart, Automatic Feed ...more
30000-40000 lb. Roehlen Industries, Double Mandrel Uncoiler/Reel, 41.5" Mandrel face, 18"-21.5" ID, 9" Mandrel Shaft, 2004
Category: Uncoilers and Centering Coil Reels
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Year: 2004
, MFG: ROEHLEN Industries, Rochester, NY, Model:, S/N: H-3893, Year Approx. 2004, To be confirmed Capacity is probably 30-40,00lbs per side, Mandrel Face 41.5", ID: 18-21.5", Center line of mandrel to floor: 57", Hydraulic Expansion, 9" Mandrel Shaft, Slide Base, Rotation supported by large Roller ...more
40000 lb. Automatic Feed Co., 67" wide, 16"-20" ID, hydraulic expansion, brake
Category: Uncoilers and Centering Coil Reels
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Automatic Feed
, MFG: Automatic Feed Co., Napoleon, OH, Model: 406072, S/N: 3207, 40,000# Capacity(Ian check if there is interest, but I think this can, do 50,000#), 67" Face Mandrel, 75" from Floor to Center Line of the Mandrel, 20-24" ID, 72" OD, Hydraulic Expansion, Brake, Self Enclosed Hydraulic Power Unit ...more
40000 lb. Rowe #40072-DSJ, Mandrel Uncoiler, 82.5" Mandrel face, 20" ID x 84" outside dimensions Coil, 10 HP, 230/460 V
Category: Uncoilers and Centering Coil Reels
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Rowe
Model: 40072-DSJ
, MFG: ROWE, Model: 40072-DSJ, S/N: 24757, 82.5" Face Mandrel, Hydraulic Expansion, 40,000 lbs capacity, 20" ID, 84" OD, 56.5" from cenetrline of mandrel to floor, Wichita Brake, Sonitrol, Main Drive motor: 10HP GE Motor, 230/460 V., 1760 RPM, 3 Phase, Doris Reducer Model: 2829, S/N: B2824047 ...more
40000 lb. Yoder, 51" mandrel, slide base, 20" ID, Wichita brake
Category: Uncoilers and Centering Coil Reels
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Yoder
, MFG: YODER, S/N: Y5740-470, 40,000# capacity, 20" ID x 51" face Mandrel, Hydraulic expansion, Wichita brake, Slide base, Hydraulic feed up motor with self enclosed power unit, Aprox. 48" from centerline of mandrel to floor.
40000 lb. Littel, Uncoiler, 68" Mandrel Face
Category: Uncoilers and Centering Coil Reels
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
44000 lb. Sonoruka #UC-15130VHCB, Uncoiler, 4-Segment Mandrel, 54" Mandrel width, 20"-24" Coil ID, 2 HP, 440 V, 1999
Category: Uncoilers and Centering Coil Reels
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Sonoruka
Model: UC-15130VHCB
Year: 1999
, MFG: Sonoruka, Model Number: UC-15130VHCB, S/N: 4378, Year: 1999, Mandrel Width: 54", 4 Segment Mandrel, Floor to Centerline of Mandrel: 70.75", Hydraulic Expansion, Coil I.D. Range: 20" - 24", 2 HP AC Motor, 440 V For Feed Up, Fixed Base, 150"L x 60"W x 91"H 8500lbs(?), Hydraulic ...more
50000 lb. Automatic Feed Co., Uncoiler, 20-24" ID x 72" outside dimensions x 72" width Coil
Category: Uncoilers and Centering Coil Reels
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Automatic Feed
, Coil Cart, Lifts coil from turntsile, rotates coil, shuttles coil to reel, and lifts to mandrels(Wheels shafts & bearings are missing from the, cart), Double Stub Uncoiler, 50,000# capacity(capable of 60,000#. Please call for, 72" OD, 20-24" ID, 72" coil width, DC feed up/drive, Dynamic breaking ...more
60000 lb. Automatic Feed Co., dual expanding stub, 72" -84" wide coil, 84" outside dimensions, DC drive
Category: Uncoilers and Centering Coil Reels
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Automatic Feed
70000 lb. Automatic Feed Co. #406072-D.E.-UNC, Double Stub Uncoiler, 72" outside dimensions x 72" width Coil
Category: Uncoilers and Centering Coil Reels
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Model: 406072-D.E.-UNC
, MFG: Automatic Feed Co., Model: 406072 D.E. UNC, S/N: 85114, Verified 70,000lbs by AFCo, 72" Wide, Can be varied by mounting distance between ends., 72" OD, No Motor, Originally a HP DC.
80000 lb. Red Bud Industries #SH30-72-80, uncoiler, 75" width, 84" outside dimensions, 23"-31" ID, 2012
Category: Uncoilers and Centering Coil Reels
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Red Bud
Model: SH30-72-80
Year: 2012
MFG: Red Bud Industries, Model: SH30-72-80, S/N: SHK-11-MO841, Year: 2012, Capacity: 80,000Lbs.(36 metric ton) with outboard support, Max. Width: 75"(12.7mm), ID: 23"-31"(584-787mm)as-is. NOTE: We have recently been told that the wedges can be, reduced(machined down) to make this Uncoiler 20"-24" ID), Max. OD: ...more
80000 lb. Sesco #45-125, double expanding uncoiler, 78" width, 20"-24" ID, 72" outside dimensions, 25 HP motor w/coil lift
Category: Uncoilers and Centering Coil Reels
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Sesco
Model: 45-125
Stamco, Uncoiler Mandrel w/Shaft, 4-Leaf Construction, 20" ID x 66" face Mandrel
Category: Uncoilers and Centering Coil Reels
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Stamco
, 20" ID mandrel with hydraulic Expansion, 66" Mandrel face, 4 leaf construction, Shaft, 2 bearings, hydraulic pushrod cylinder, See dwg.
Servo Driven Mandrel Uncoiler, 14.5" Mandrel face, 16" ID x 72" outside dimensions, 3"/5" Thick Pads
Category: Uncoilers and Centering Coil Reels
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
, 14.5" Face Mandrel, 16" ID (15" Dia. colapsed) with 3" Thick Pads, 3" Thick Pads, 5" Thick Pads, 2 additional Mandrel Shafts, 72" + OD, Slide Base, Hold Down Arm, Shaft & Cylinder(No roll/wheel presently), Lenze/Intorq(Extertal Germany) Servo Drive Motor BFK458-20, 44kW(59HP)at ...more
Upenders and Downenders
6 Results
6000 lb. ATI, Upender/Die Turnover, 102.5" x 71" Deck, 102.5" x 60" Clamp Plate, 62" Gap, 2 HP
Category: Upenders and Downenders
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
, MFG: ATI, Believed to be a 6,000lbs capacity but must verify, 102.5" x 71" Deck, 102.5" x 60" Clamp Plate, Gap: 62" max. open, approx. 17 Closed, 2HP motor, 1" Plate construction, ***With Controls, Operators Station, 2 extra E-stops, (2)Banner Light, Curtains(2 senders, 2 receivers for two curtains), Conduit & ...more
12000 lb. Atlas, Bundle Turnover, 89" width, 36" Gap, 53" Pass height, (2) Rows of Chain Conveyor, 1995
Category: Upenders and Downenders
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Atlas
Year: 1995
, MFG: ATLAS, Fenton, MI, S/N: Job No. F663.00, Year: 1995, Capacity 12,000lbs, Bundle Turnover with 2 sets of chains for in/out feed of material, Gap(Distance between conveyor chain when full open): 36", Width(Opening Left to Right between frames): 89", Depth: From frame to frame is 112.5", 94" of ...more
20000 lb. Atlas, Bundle Turnover, 84" width between frame at End, 162" between frame at side, 80" face x 6" diameter Conveyor Rolls
Category: Upenders and Downenders
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Atlas
, MFG: Atlas, S/N:, 84" between frame at End, 162" Between frame at side(ends of frames, are 6" at each end, so technically you could turn over 174" wide material loading from, the end), 36.5" Gap between upper & lower rolls wide open, Clamping actuated by hydraulic motor/s driving Four(4) Ball Screw, Jacks, 80" ...more
20000 lb. Automatic Feed Co., Bundle Turnover, 90" wide x 34" gap, 173" max length, 5" diameter Conveyor Rolls
Category: Upenders and Downenders
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Automatic Feed
, MFG: Automatic Feed Company, Napoleon, OH, S/N:, 90" wide x 34" gap, Max. Length: 173", 61" to top of Rolls if floor mounted, 17" to top of rolls of conveyor, Clamping actuated by hydrauilic motor/s driving Eight(8) Ball Screw, Jacks, 5" dia. Conveyor Rolls on 9.5" Centers, Turnover Frame is approx. 15' in ...more
20000 lb. Upender, Pack Man Type, 48" x 48" Deck, 60" outside dimension capacity, 27.125" Passline to Floor, 2 HP
Category: Upenders and Downenders
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
, New 2024, In Stock & Ready to Ship!, Capacity: 20,000lbs Max, "PAC MAN" Style Design- Mechanical Actuated Upender, 48" x 48" Deck dimensions, 60" OD Capacity, 27.125" passline to floor, Removable V saddle, held by hardened pins and removable rings, 3, positions standard, 2 HP 208-230/460/3 60, or 230/2/60 ...more
30000 lb. Bradbury, coil upender/tipper
Category: Upenders and Downenders
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Bradbury
MFG: BRADBURY, S/N: 17248, Capacity 30,000LBS., Flat Deck: 65" Wide x 67" Deep, "V" Deck: 65" wide x 50" Deep, Hydraulic Actuated., Lincoln: 15HP AC Motor, 230/460V. 1750RPM, 3ph, 60hz, 40/20 amp.
