37 Results
12" Cauffiel Drag Tension Stand, 12" diameter x 16" Face Passline Roll, 36" x 48" Base Plate
D & H Machinery Inc | Toledo, OH
Category: Tension Stands
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Cauffiel
Cauffiel Drag Tension Stand, 12" Wide Max. Capacity, 13" Wide Between Frames, Air Cylinder for Pad Tension, Exit Passline Roll, 6" Dia. x 16" Face, Passline Height: 62", Base Plate: 36" x 48", Overall Size: 41" L x 32" W x 81" High, Removed and in storage: Toledo, OH.
20" Pro-Eco Drag Type Tension Stand, 61" passline height, 108" pit table, entry passline roll
G-2000 | Toledo, OH
Category: Tension Stands
Seller: G-2000
Location: Toledo, OH
Mfr: Pro-Eco
MANUFACTURER.: PRO-ECO, WIDTH.: 20", PASSLINE HEIGHT.: 61", PIT TABLE.: 108", ENTRY PASSLINE ROLL.: YES, EXIT CROP SHEAR.: YES, BLADE LENGTH.: 20", EXIT SEPERATOR TOOLING BAR.: YES, EXIT THREADING TABLE TO RECOILER.: YES, Machine Type.Coil Tension Stands Manufacturer.PRO-ECO Model.N/A Year.N/A Condition.Used.
24" Custom, tension stand, drag board, air clamp, entry separator shaft, roll tension unit
D & H Machinery Inc | Toledo, OH
Category: Tension Stands
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Custom
Combination Tension Stand, -Drag Board:, Air Clamp, Entry Separator Shaft, -Roll Tension Unit:, 30" Face x 10" Diameter, Both Rolls have Eaton Water Cooled Brakes.
26" Ruesch, tension stand, hydraulic cylinder for retraction, pad type
D & H Machinery Inc | Toledo, OH
Category: Tension Stands
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Ruesch
Ruesch Tension Stand, -Hydraulic Cylinder for Retraction, -Pad Type, -In storage: Toledo, OH.
32" x .09" Ruesch Drag Stand
CJE Machine | Cumming, GA
Category: Tension Stands
Seller: CJE Machine
Location: Cumming, GA
Mfr: Ruesch
Get email updates for newly added Tension Stands
Tension stands (also known as tension control devices) are specialized components used in metal processing lines to maintain consistent tension on strips or coils during operations like slitting, cutting, or recoiling. Their controlled tension application prevents slack and misalignment, ensuring smooth material flow and precise handling.
32" Ruesch, tension stand
D & H Machinery Inc | Toledo, OH
Category: Tension Stands
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Ruesch
Ruesch Tension Stand, -Capacity: 32" Wide, -Pad Type, -(2) - 2.5" Bore Hydraulic Cylinders for Pressure, 1.75" Dia. Rods x 6" Stroke (approx.), -Entry Passline Roll, 32.5" Face Width x 3.5" Dia., -Exit Separator Tooling Bar, 32" Face Width x 2.5" Dia., -Less Fabricated Base, -In Storage: Toledo, OH.
36" Ruesch #N3155, roll type tension stand
D & H Machinery Inc | Toledo, OH
Category: Tension Stands
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Ruesch
Wide Ruesch Tension Stand, Model N3155, -Roll Type Tension Stand, -Capacity: 36" Wide, -42" Face Width x 18" Diameter Rolls, -Polyurethane Covered Rolls, -Parallel Adjustment of Top Roll by Handwheel, -50" Between Housings, -(2) Parker Hydraulic Cylinders for Pressure, 3.25" Bore x 3" Stroke, -(2) Wichita ATD-111 ...more
36" Wean Tension Stand
VX Machinery | Sylvania, OH
Category: Tension Stands
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Wean
The 36" Wean Tension Stand is designed for industrial applications requiring reliable tension control. As a used piece of equipment from Wean, it offers efficient performance for various manufacturing processes. The stand supports a maximum material width capacity of 36 inches, making it suitable for medium to ...more
40" Tension Stand, Pad Type, Adjustable Pressure Drag Wipe System
VX Machinery | Sylvania, OH
Category: Tension Stands
Seller: VX Machinery
Location: Sylvania, OH
This used tension stand s an adjustable pressure drag wipe system, making it suitable for various industrial applications requiring precise tension control. The pad type used in this system is designed to offer optimal performance, ensuring consistent and reliable results in different settings. The pad width is 40 ...more
42" Machine Concepts, tension stand
D & H Machinery Inc | Toledo, OH
Category: Tension Stands
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Machine Concepts
Machine Concepts Tension Stand, -Drag Wipe Type, -Capacity: 42" Wide, -45" Between Housings, -(4) - Individual Tension Pads, -60" Passline Height, -Main Control Panel, -Overall Size: 70" L x 48" W x 79" High, -In Storage: Toledo, OH.
48" x .135" Nova, alligator tension stand, air bag for clamping tention, exit passline roll, 12.5" diameter x 51" face rubber covered
D & H Machinery Inc | Toledo, OH
Category: Tension Stands
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Nova
Nova Tension Stand, -Capacity: 48" x 0.135", -Alligator Type Design, Air Cylinder Open/Close, -52" Pad Length, -Air Bag for Clamping Tension, -Exit Passline Roll, 12.5" Dia. x 54" Face Rubber Covered, with Tach Generator, -Passline Height: 48", -Overall Size: 120" L x 26" W x 73" High, -In Storage: Toledo, OH.
48" x .135" Stamco, combination rotary/drag stand, spare rolls
CJE Machine | Cumming, GA
Category: Tension Stands
Seller: CJE Machine
Location: Cumming, GA
Mfr: Stamco
48" Loopco, Drag Type, .135" Mild Steel, Pit Table, Separator Shaft, Recoiler Table
CJE Machine | Cumming, GA
Category: Tension Stands
Seller: CJE Machine
Location: Cumming, GA
Mfr: Loopco
48" Loopco, tension stand, 60" passline, deflector roll
D & H Machinery Inc | Toledo, OH
Category: Tension Stands
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Loopco
Loopco Tension Stand w/Pit Table, -Entry Pit Cross Over Table:, 82" x 54" Hydraulic Sliding Section, 80" Long Fixed/Attached, Hydraulic Cylinder Lift and Lower, -Entry Separator Tooling Bar:, -Drag Type Tension Unit:, (3) Air Cylinders - Top Mounted, 6" Maximum Lift, -Recoiler Threadup Table:, 36" Long, Hydraulic ...more
52" x .137" Stamco, Roll Type Tension Stand, (2) Tension Rolls, (2) Spare Tension Rolls, (1) Spare Bridle Rolls
Met-Pro Machinery Inc | Detroit, MI
Category: Tension Stands
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Stamco
, MFG: STAMCO, Mach. No.: 4436, Sale No.: 372 83 7A,.010-.137" Mild Steel Capacity, Roll Face:, Pass Height:, Hydraulic Clam-shell Opening, Track Mounted Separator Shaft, Combination Drag Pad with Rotary Tension, Two (2) 3M Checkered Tension Rolls (one set in machine), Exit Pass-line Roll, Two (2) Spare 3M ...more
52" x .137" Stamco, tension stand, exit passline roll
D & H Machinery Inc | Toledo, OH
Category: Tension Stands
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Stamco
-0.010" - 0.137" Mild Steel Capacity, -Hydraulic Clam Shell Opening, -Track mounted Separator Shaft, -Combination Drag Pad with Rotary Tension, -Two 3M checkered Tension Rolls (one set in machine), -Exit Pass Line Roll, -Two Spare 3M Checkered Tension Rolls, -One Spare Bridle Roll.
52" Tension Stand, 41.5" passline height, 52" diameter x 53" face entry pinch rolls
D & H Machinery Inc | Toledo, OH
Category: Tension Stands
Seller: D & H Machinery Inc
Location: Toledo, OH
52" Tension Stand, -Alligator Type, -Drag Board Length: 60", -Entry Pinch Rolls, 8" Dia. x 53" Face, Top roll is coated, Bottom is steel, -Separator Shaft/Tooling Bar: 3.5" Dia. x 42" Long, -41.5" Passline Height, -Width is approx. 41" (Catenary table adds 15"), -Overall Dimensions: 113" L x 56" W x 67" High, -In ...more
52" Alligator, Drag Board Tension Stand, 52" diameter x 53" face Pinch Rolls, 60" width Drag Board, 41.5" Pass height, 3.5" diameter Tooling bar
Met-Pro Machinery Inc | Detroit, MI
Category: Tension Stands
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
, MFG:, 60" wide Drag board length, 41.5" Pass Height, Entry Pinch Rolls: 8" dia. x 53" face. Upper roll is coated, Bottom, is steel, 3.5" dia. tooling bar, Depth is approx. 41" less the catenary table which adds 14.5", Separator Shaft/Tooling Bar: 3.5" dia. x 42" Long ...more
54" Machine Concepts, tension stand
D & H Machinery Inc | Toledo, OH
Category: Tension Stands
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Machine Concepts
Machine Concepts Tension Stand, -Drag Wipe Type, -Capacity: 54" Wide, -56" Between Housings, -(5) - Individual Tension Pads, -60" Passline Height, -Main Control Panel, -Overall Size: 76" L x 34" W x 80" High, -In Storage: Toledo, OH.
60" x .125" Bronx, combination tension stand & crop shear
Galaxie Corporation | Wayne, MI
Category: Tension Stands
Seller: Galaxie Corporation
Location: Wayne, MI
Mfr: Bronx
Machine# 12354, Serial# 201286, Thickness Range:.018"-.125", Rotary Drag / Board Design, Entry Drag Board Pad, Air Blader, Hydraulic Open-Close, 62" Width, Dual Wichita Water Cooled Brakes, Neopreme Rolls, Exit Crop Shear, Up Cut Design.
60" x .135" Braner, belt bridle tension stand, R to L, 1000 FPM
National Machinery Exchange | Newark, NJ
Category: Tension Stands
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Braner
Manufacturer: Braner, Coil Width: 60" max., Strip Thickness:.135" max.,.020" min., Slit Coil Width: 2" or Wider per Individual Mult, Line Direction: Right to Left, Line Speed: 1,000 FPM max., Separator Spindles: Two (2) (One Entry and One Exit), Spindle Sleeve Diameter: 3.50" OD (Sleeves by Customer), Disc Diameter: ...more
60" x .187" Pro-Eco, Drag Stand, Clam Shell opening, Separator Shaft
CJE Machine | Cumming, GA
Category: Tension Stands
Seller: CJE Machine
Location: Cumming, GA
Mfr: Pro-Eco
60" Loopco, Drag Stand, Separator Bar. .135" mild steel capacity
CJE Machine | Cumming, GA
Category: Tension Stands
Seller: CJE Machine
Location: Cumming, GA
Mfr: Loopco
60" Loopco, Drag Board Tension Stand, 58.5" Pass height, 67" between side frames, 60" diameter x 6.5" L Cylinders w/ 1.25" diameter Rod
Met-Pro Machinery Inc | Detroit, MI
Category: Tension Stands
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Loopco
, MFG: LOOPCO Industries, S/N: 710 J 6404 A, 67" Between Side Frames, 58.5" Pass Height, Three Up acting Miller brand Cylinders 7" dia. x 6.5Long with 1.25", dia Rod, 3000lbs ship weight.
60" Machine Concepts, tension stand
D & H Machinery Inc | Toledo, OH
Category: Tension Stands
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Machine Concepts
Machine Concepts Tension Stand, Model: E02-04089-A001, -Drag Wipe Type, -Capacity: 60" Wide, -63" Between Housings, -(4) - Individual Tension Pads, -66.5" Passline Height, -Main Control Panel, -Overall Size: 82" L x 48" W x 87" High, -In Storage: Toledo, OH.
60" Machine Concepts, tension stand
D & H Machinery Inc | Toledo, OH
Category: Tension Stands
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Machine Concepts
Machine Concepts Tension Stand, Model: E02-04089-A001, -Drag Wipe Type, -Capacity: 60" Wide, -63" Between Housings, -(4) - Individual Tension Pads, -66.5" Passline Height, -Main Control Panel, -Overall Size: 95" L x 34" W x 90" High, -In Storage: Toledo, OH.
60" Mico Tension Stand, entry & exit separator tooling shafts, with Crop Shear
D & H Machinery Inc | Toledo, OH
Category: Tension Stands
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Mico
Mico Tension Stand, -60" Wide Combination Pad and Roll Type, -Entry and Exit Separator Tooling Shafts, -Drag Type Tension Unit w/Air Bladder, -16" Diameter Urethane Coated Rolls, -Hydraulic Motor Threading Drive, -(2) Wichita Water Cooled Brakes, -Exit Hydraulic Crop Shear, -Removed and in storage.
60" Pro-Eco, Tension Stand, 60" wide
D & H Machinery Inc | Toledo, OH
Category: Tension Stands
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Pro-Eco
Pro Eco Tension Stand, -Drag Board Type, -Pit Cross-over Table, -Entry Separator Tooling Shaft, -(2) - Drag Boards, Air Operated (Less Air Bag), -In Storage: Toledo, Ohio.
72" x .126" Stamco, rotary drag board tension stand, Wichita water cooled brake
National Machinery Exchange | Newark, NJ
Category: Tension Stands
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Stamco
Width: 72 inches, Rotary Drag Board Tension Stand with Exit Crop Shear, Wichita Water Cooled Brake, 75" Face on Rolls, Quick Change Roll Design, Separator Shafts for Strip.
72" x .375" Red Bud Industries, drag board tension stand, 2012
Met-Pro Machinery Inc | Detroit, MI
Category: Tension Stands
Seller: Met-Pro Machinery Inc
Location: Detroit, MI
Mfr: Red Bud
Year: 2012
MFG: Red Bud Industries, Model:, S/N:, 76" board face,.375" max Gauge Capacity, Pass height, Drag Board Design, Multiple air bags for optimal control, No tooling bar, but can be added.
90" McKay Tension Stand, Pad Type
VX Machinery | Sylvania, OH
Category: Tension Stands
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Mckay
The 90" McKay Pad-Type Tension Stand is a reliable used piece of equipment designed for industrial applications where precision and durability are critical. Featuring a pad-type construction, this tension stand efficiently manages material tension, ensuring smooth and controlled operations. With a prominent width of ...more
72" Braner Tension Stand, 150 HP, 110 V., new
VX Machinery | Sylvania, OH
Category: Tension Stands
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Braner
This 72" Braner Tension Stand is a high-quality piece of industrial equipment that is brand new and has never been used. It offers a robust construction suited for various industrial applications, providing reliable and efficient tension control for metal processing lines. Key include a substantial 72-inch width ...more
Loopco, Tension Stand
VX Machinery | Sylvania, OH
Category: Tension Stands
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Loopco
The Loopco Pad Tension Stand is a reliable, used piece of industrial equipment designed to manage material tension effectively. It is constructed to accommodate a width capacity of 54 inches, ensuring a wide range of material handling possibilities. This stand is suitable for various industrial applications where ...more
Monarch Stamco, Syncro Tension Stand, .015"-.135" Gauge, (2) 76" face x 15.5" - 16" diameter Rolls, 40" base height, 42" pass height, 125 HP
VX Machinery | Sylvania, OH
Category: Tension Stands
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Monarch Stamco
The used Syncro Tension Stand by Monarch Stamco is designed for handling various material thicknesses, ranging from a minimum of.015" to a maximum of.135". The roll face measures a substantial 76.5", while the nominal roll diameter is 16". The unit is two roll sets and s a tooling shaft diameter of 3.375", housed ...more
Ruesch, rewind tension bridle, entry separator tooling bars, 5" diameter x 20" face bridle rolls
D & H Machinery Inc | Toledo, OH
Category: Tension Stands
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Ruesch
Ruesch Rewind Tension Bridle, -N2729G 6043, -Entry Separator Tooling Bars, -5" Dia. x 20" Face Bridle Rolls, Rubber Covered, -Passline Height: Approx. Range 48" to 62", Height is adjustable thru AC Motor and Screw Jack, -Overall Size: 40" L x 29" W x 64" High, -In Storage: Toledo, OH.
Skidmore Wilhelm #MZ, Bolt Tension Calibrator, 126,000 lbs.
Jack Wilkerson Industrial Surplus | Gonzales, LA
Category: Tension Stands
Seller: Jack Wilkerson Industrial Surplus
Location: Gonzales, LA
Mfr: Skidmore Wilhelm
36" Tension Stand, air cylinder operated
D & H Machinery Inc | Toledo, OH
Category: Tension Stands
Seller: D & H Machinery Inc
Location: Toledo, OH
36" Tension Stand, -36" Wide, -Pad Type Tension Stand, -Entry Catenary Rolls, -Entry Passline Roll, -Tension by (2) Air Cylinders, -Tension Adjustment, -Overall Dimensions: 4'6" L x 3" W x 5' H, -Approx. Weight: 500 lbs., -In Storage: Toledo, OH.
