1 - 50 of 120 listings
Bacci #TTF-1, Miter/Mortise/Tenon Door Machine, 45 deg miter frame door production, 3 HP w/400 mm blade diameter, 7-1/2 HP shaper, 60 mm boring depth, 1998
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Bacci
Model: TTF 1
Year: 1998
BACCI TTF1 T2M Cabinet Miter Door Machine Cutting boring and moulding machine, designed for 45 miter frame door production, with each cycle the parts are trimmed drilled and finger jointed; single sided cutting-boring-molding machine. : -- Hydraulic control of table stroke; ball bushing and ground and hardened guides ...more
Cam-Wood #SM-545/HSX, high-speed feed through moulder, 5 heads, 17' 7" x 6" capacity, 2025, new
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: SM-545/HSX
Year: 2026
CAM-WOOD SM-545 HS 5-Heads High-Speed Trough Feed /Planer/Moulder(5) Heads (B-R-L-T-T), working cap. 450 mm X 160 mm (17-7" x 6-1/4").: -- Max/Min working width 17.7" - 3/4" -- Max/Min thickness 6 1/4" - 5/16" -- Minimum length 9-1/2" -- Head sequence: Bottom 15 HP, right 15 HP, left 15 HP, top 20 HP, and top or ...more
Cam-Wood #SM-732HSX, 7-head, high-speed feed-through moulder, 15 HP, 20-260 FPM, 11-13/16" x6-1/4" work capacity, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: SM-732HSX
Year: 2026
CAM-WOOD SM-732 HS 7-Heads High-Speed Trough Feed Moulder(7) Heads (B-R-L-T-T- T-B), working cap. 111 13/16" x 6-1/4"".: -- Max/Min working width 11 13/16" - 3/4" -- Max/Min thickness 6 1/4" - 5/16" -- Minimum length 9-1/2" -- Head sequence: Bottom 20 HP, right 15 HP, left 15 HP, top 20 HP, top 20 HP, top 15 HP and ...more
Cam-wood SM-124TAX, feed throught moulder, 4-head moulder, 10-1/4" x 6" width, 4" max thickness, 1/2 HP feed motor, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Year: 2026
CAM-WOOD SM-124TAX Feed Through Moulder4-Head Moulder with a 11-3/4" width x 9" maximum thickness when used as a 2-sided planer, and 10-1/4" width x 4" maximum thickness when used in 4-sided operation ( please see literature ).: -- Cast Iron mainframe to maximize stability & minimize vibration during operation for ...more
Cam-wood SM-155AX, feed through moulder, 5-head moulder, 6" width, 4.75" max thickness, 9 1/2" length, 4 HP feed motor, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Year: 2026
CAM-WOOD SM-155AX Feed Through Moulder 5-Head Moulder with a 6" width and a 4.75" max. thickness capacity.Overall : -- Cast Iron mainframe to maximize stability & minimize vibration during operation for years of use. -- Fully enclosed sound hood with lift-up door for easy set-up access. -- Adjustable infeed table ...more
Get email updates for newly added Woodworking Moulders
A woodworking moulder is a versatile machine that shapes and profiles wood for tasks like crafting trim, baseboards, and decorative elements. It features precise cutting tools designed to create detailed patterns, commonly used in projects like cabinetry, furniture making, and millwork. This multi-functional machine is essential in woodworking, offering flexibility for both small workshops and large production operations.
Cam-wood SM-156AX, feed through moulder, 6-head, 6" x 4" working capacity, 40 mm spindle diameter, 6000 ROM, 4 HP feed motor, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Year: 2026
CAM-WOOD SM-156A Feed Through Moulder;6-Head (B-R-L-T-T-B), working cap. 6" x 4".: -- Head sequence: Bottom 7.5 HP, right 5.5 HP, left 5.5 HP, top 10 top, top 7.5 HP and bottom 7.5 HP motor. -- Spindle diameter 40 mm with cutterhead speed of 6,000 RPM; spindles mechanical readouts for axial and radial adjustments. -- ...more
Cam-wood SM-236AX, feed through moulder, 6-head, 9" x 5-1/4" working capacity, 4 HP feed motor, 16-82 FPM, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Year: 2026
CAM-WOOD - SM-236AX,.Moulder Feed Through 6-Head (B-R-L-T-T-B), working cap. 9" x 5-1/4". : -- Head sequence: Bottom 10 HP, Right 10 HP, Left 10 HP, Top 15 HP, Top 10 HP and Bottom 10 HP motor -- Max. (Min.) Working Thickness 5-1/4" (5/16") -- Min. Working Length 9-1/2 in. -- Feed Motor 4 HP, variable feed speed from ...more
Cam-wood SM-3006X, push feed moulder, 3-head, 47" L x 10" width table, ) 6" width x 5" H max moulding capacity, 5" max cutter, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Year: 2026
CAM-WOOD SM-3006 Push Feed Moulder4" x 6" 3-Side Planer, Moulder; Our most cost effective small to medium shop size Push-Feed Moulder. & s: -- If you try to run your short runs of special moulding at lower prices, this machine could be your answer. -- Solidly built with cast and steel plate construction, this is ...more
Cam-wood SM-532LX, feed through moulder, 5-head, 12 1/2" x 6" working capacity, 9 1/2" min length, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Year: 2026
CAM-WOOD SM-532LX 5-Head Through Feed Moulder5-Head (B-R-L-T-B), working cap. 12-1/2" x 6".: -- Max/Min working width 12-1/2" - 3/4" -- Max/Min thickness 6" - 5/16" -- Minimum length 9-1/2" -- Head sequence: Bottom 15 HP, right 15 HP, left 15 HP, top 25 HP and bottom 20 HP motor. -- All Horizontal spindle have ...more
Cam-wood SM-623LX, feed through moulder, 6-head, 9-3/4" x 5 1/4" working capacity, 40 mm spindle diameter, 7200 RPM, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Year: 2026
CAM-WOOD SM-623L Moulder, Feed Through 6-Head (B-R-L-T-T-B), working cap. 9-3/4" x 5-1/4". Head sequence: -- Bottom 10 HP, right 10 HP, left 10 HP, top 20 HP, top 15 HP, and bottom 20 HP motor. -- Spindle dia. 40 mm with a cutter-head speed of 7,200 RPM. All spindles with mechanical digital readouts. -- Feed: Variable ...more
Cam-wood SM-632HSX, feed through moulder, 6-head, 12-1/2" x 6-1/4" working capacity, 9-1/2" min length, 50 mm spindle diameter, 6200 RPM, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Year: 2026
CAM-WOOD SM-632 HS 6-Heads High-Speed Through Feed Moulder(6) Heads (B-R-L-T-T-B), working cap. 12-1/2" x 6-1/4"".: -- Max/Min working width 12 " - 3/4" -- Max/Min thickness 6" - 5/16" -- Minimum length 9-1/2" -- Head sequence: Bottom 15 HP, right 15 HP, left 15 HP, top 20 HP, top 20 HP and bottom 20 HP motor. -- All ...more
Cam-wood SM-632LX, feed through moulder, 6-head, 12 1/2" x 6" working capacity, 9 1/2" min length, 50 mm spindle diameter, 7600 RPM, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Year: 2026
CAM-WOOD SM-632LX 6-Head Feed Through Moulder[6-Head (B-R-L-T-T-B), working cap. 12-1/2" x 6"]: -- Max/Min working width 12-1/2" - 3/4" -- Max/Min thickness 6" - 5/16" -- Minimum length 9-1/2" -- Head sequence: Bottom 15 HP, right 15 HP, left 15 HP, top 25 HP, top 20 HP and bottom 20 HP motor. -- All Horizontal ...more
Cam-wood SM623-HSX, feed through moulder, 9" x 6 1/4" working capacity, 9 1/2" min length, 40 mm spindle diameter, 6200 RPM, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Year: 2026
CAM-WOOD SM-623-HS 6-Head High-Speed Trough Feed Moulder(6)-Heads (B-R-L-T-T-B), working cap. 9" x 6-1/4".: -- Max/Min working width 9-3/4" -- Max/Min thickness 6-1/4" - 5/16" -- Minimum length 9-1/2" -- Head sequence: Bottom 10 HP, right 10 HP, left 10 HP, top 15 HP, top 15 HP and bottom 15 HP motor. -- Spindle dia. ...more
Costa #Spamatic-220, Moulder
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Moulders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Costa
Model: SPAMATIC-220
A. Costa Spamatic 220 Molder.
Custom built moulder infeed
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Moulders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Custom
Each system is custom built to fit your. Standard Electric Lateral Chain Feeders include Basic Feeder with transport length of 30" Workpiece width 3/4" - 9-1/4" Min. Workpiece length 12" Drive system with 4 HP total drive system Feed speed range 50 - 250 ft/min (up to 400ft/min available) Thickness 1/4" - 4" Steel ...more
Diehl #DL-405, feed through moulder, 5-head, 8-5/8" x 4-1/2" cap., 22-135 FPM
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Diehl
Model: DL-405
DIEHL DL-405 MOULDER: -- 5-Head, 8-5/8" x 4-1/2" cap. -- Head sequence: Bottom 15 HP, right 10 HP, left 10 HP, top 15 HP, bottom 10 HP motor; all spindles 1-13/16" dia., belt driven at 6,000 RPM; detachable jointers on side, top, and bottom spindles, spindles reversing on side heads; -- Mechanical digital readout for ...more
Diehl #TFM-68, Feed Through Moulder, 6-Head (B, R, L, R, T, B), 8-5/8" x 4-1/2" capacity, 1-13/16" Vert spindle diameter, 2-1/8" Horizontal diameter, 150 FPM, 1982
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Diehl
Model: TFM-68
Year: 1982
DIEHL - TFM-68,.4"; x 8"; 5-Head High Speed Jointed Moulder5-Head (B-R-L-R-T-B) with 8-5/8" x 4-1/2" capacity. Head sequence: Bottom 15 HP, Right 10 HP, Left 10 HP, Right 10 HP, Top 15 HP, and Bottom 20 HP motor.1st Bottom and 1st right side run at 3,600 RPM; all the other spindles run at 6,000 RPM utilizing the ...more
Gau Jing #GS-523, Moulder, 5 Head, 230/460V 3ph 60hz, Good Running Condition, 2008
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Moulders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Gau Jing
Model: GS-523
Year: 2008
2008 Gau Jing GS-523 Moulder, 5 Head, 230/460V 3ph 60hz, Recently Taken Out of Service, Good Running Condition.
Gau Jing # GS-623, Moulder, 6 Head, 460V 3ph 60hz, Good Running Condition
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Moulders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Gau Jing
Model: GS-623
Year: 2008
Gau Jing GS-623 Moulder, 6 Head, 460V 3ph 60hz, Good Running Condition, Recently Removed From Service.
Gubisch #CP-230, Feed Through Moulder, 4-Head (T-R-L-B), 6" x 4" capacity, 1-13/16" spindle diameter, 120 FPM
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Gubisch
Model: CP-230
GUBISCH MODEL CP-230 4 HEAD PUSH FEED MOULDER: -- 4-Head (T-R-L-B), working capacity 6" x 4". -- Head sequence: Top 15 HP, right/left 15 HP and bottom 15 HP motor. -- Spindle dia. 1-13/16" all heads with cutterhead speed of 6,000 RPM on vertical spindles and 7,000 RPM on horizontal spindles. Heavy duty, built-in ...more
Holytek #MX-7S23U, feed through moulder, 2008
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Holytek
Model: MX-7S23U
Year: 2008
HOLYTEK MX-7S23 Through Feed Moulder:7-Head (B-R-L-T-T-B-U), working cap. 230 mm X 160 mm (9" x 6.3").Head sequence: -- Bottom 10 HP, right 10 HP, left 15 HP, top 15 HP, Top 15 HP, Bottom 15 HP and Universal 10 HP motor. -- Spindle dia. 40 mm with cutterhead speed of 6,000 RPM. -- Mechanical digital readouts, "Dual ...more
JUST ADDED!
Kentwood #M609S, 6-Head Feed Through Moulder, 9-1/16" x 6" working capacity, 10-15 HP, 6000 RPM, 1-13/16" spindle diameter, 480 Volt, 2013
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Kentwood
Model: M 609S
Year: 2013
KENTWOOD M609S 6-HEAD FEED THROUGH MOLDERHead Configuration; -- 6-Head (B-R-L-T-T-B),: -- Working cap. 9-1/16" x 6". -- Head sequence: Bottom 10 HP, Right 10 HP, Left 10 HP, Top 15 HP, Top 15 HP and Bottom 10 HP motor. -- Spindle dia. 1-13/16" with cutterhead speed of 6,000 RPM. -- All spindles are mechanical digital ...more
Kentwood #M-509, Moulder, 6000 RPM, 40 mm Spindle Dia
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Moulders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Kentwood
Model: M-509
, - Working Width: 15 - 230 mm (19/32 to 9-1/16 inches), - Working Height: 6 - 150 mm (1/4 to 5-29/32 inches), - Spindle Speed: 6,000 RPM, - Spindle Dia: 40 mm, - Clamping Length of horiz. and universal spindles: 235 mm, - Clamping Length of vertical spindles: 160 mm, - Feed Speed (variable): 6-24 m/min (19-80 fpm), - ...more
Kentwood #M612HSD, Moulder, 12" capacity, 2007
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Moulders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Kentwood
Model: M612HSD
Year: 2007
Kentwood M612HD Moulder, 12" Capacity.
Kentwood #M709HD/A, moulder, 133 hp 230V, 9" working width x 5.9" working height, 20-118 fpm, 2009
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Moulders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Kentwood
Model: M709HD/A
Year: 2009
Kentwood M709HD/A Moulder, 133 hp 230V 3ph 60hz 450.24 amps, Max working width 230mm (9"), Max working height 150mm (5.9"), Feed speeds 20 to 118 ft/min, 1st head: bottom horizontal spindle, 15 hp, 2nd head: right hand vertical spindle, 15 hp, 3rd head: left hand vertical spindle, 15 hp, 4th head: right hand vertical ...more
Leadermac #H-25-R, Moulder, 5-Head, 9-13/16" x 6-5/16" Capacity, 6000 RPM, 196 FPM Feed Speed, 400 V., 2005
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Leadermac
Model: H-25-R
Year: 2005
WEINIG HYDROMAT 25 R. Feed Through Moulder, 5-head;Four-sided planing and profiling of large workpieces at high feed speeds. Also for fresh sawn timber.Heavy Duty cast-iron construction - reduces vibrations for optimum surface quality.: -- Working capacity: 250 x 160 mm (9-13/16" x 6-5/16"). -- Head configuration: ...more
Leadermac #LMC-418S, 4-Head Moulder, 20-80 FPM, spiral head on bottom, 460 volt 3 phase, 2019
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Moulders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Leadermac
Model: LMC-418S
Year: 2019
Leadermac LMC 418-S, 4 head moulder, 20-80 FPM feed, spiral head on bottom, 460 volt 3 phase.
Leadermac #LMC-523, Moulder, 5 head
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Moulders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Leadermac
Model: LMC-523
Leadermac 5-Head Moulder, Very low hours!.
Leadermac #LMC-630C, Moulder, 12" x 6", LeaderMac 630C, 2010
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Moulders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Leadermac
Model: LMC-630C
Year: 2010
Leadermac 630C, 12" x 6" capacity, this one available NOW, Currently not under power.
Leadermac #LMC-723C, feed through moulder, 7-head, 9-1/16" x6-5/16" capacity, 20-78 FPM, 2005
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Leadermac
Model: LMC-723C
Year: 2005
LEADERMAC LMC-723 Feed Through Moulder, 7-head;1-piece, Cast Iron Machine Frame is specially heat treated for maximum stability and rigidity.: -- Head configuration: 7-Head (B-R-L-T-T-B-U), working capacity 230 x 160 mm (9-1/16" x 6-5/16"). -- Spindle sequence: 1. Bottom 5.5 kW (7.5 HP), 2. right 5.5 kW (7.5 HP), 3. ...more
Leadermac #LMC-723C, feed-through moulder, 7-head, 9-1/16" x 5-15/16" capacity, 44mm spindle diameter, 20-78 FPM, 2000
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Leadermac
Model: LMC-723C
Year: 2000
LEADERMAC LMC-723 Feed Through Moulder, 7-head;1-piece, Cast Iron Machine Frame is specially heat treated for maximum stability and rigidity.: -- Head configuration: 7-Head (B-R-L-R-T-B-U), working capacity 230 x 150 mm (9-1/16" x 5-15/16"). -- Spindle sequence: 1. Bottom 7.5 kW (10 HP), 2. right 7.5 kW (10 HP), 3. ...more
Leadermac #LMC-723C, Feed Through Moulder, 7 head, 9-1/16" x 5/516" working capacity, 1-9/16" spindle diameter, 20-118 FPM, 2002
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Leadermac
Model: LMC-723C
Year: 2002
LEADERMAC LMC-723 Hypermac. Feed Through Moulder, 7-head;Heavy-Duty 1-piece cast iron machine frame, heat-treated, for maximum stability.: -- Head configuration: 7-Head (B-R-L-T-B-T-U), working capacity 230 x 150 mm (9-1/16" x 5-5/16"). -- Spindle sequence: 1. Bottom 11 kW (15 HP), 2. right 7.5 kW (10 HP), 3. left 7.5 ...more
Leadermac #LMC-723C, Moulder, 7-Head, 78 FPM Feed Speed, 400 V., 2010
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Leadermac
Model: LMC-723C
Year: 2010
LEADERMAC LMC-723. Feed Through Moulder, 7-head1-piece, Cast Iron Machine Frame is specially heat treated for maximum stability and rigidity.: -- Head configuration: 7-Head (B-R-L-T-T-L-R), working capacity 240 x 170 mm (9-7/16" x 6-11/16"). -- Spindle sequence: 1. Bottom 5.5 kW (7.5 HP), 2. right 5.5 kW (7.5 HP), 3. ...more
Leadermac #LMC-723C, Feed Through Moulder, 7-Head, 10 HP, 6000 RPM, 78 FPM, 400 V., 2010
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Leadermac
Model: LMC-723C
Year: 2010
LEADERMAC LMC-723 Feed Through Moulder, 7-head;1-piece, Cast Iron Machine Frame is specially heat treated for maximum stability and rigidity.: -- Head configuration: 7-Head (B-R-L-R-T-T-B), working width max. 230 mm (9-1/16"), min. 15 mm (9/16"). Working height max. 160 mm (6-5/16"), min. 10 mm (3/8"). -- Spindle ...more
JUST ADDED!
Leadermac #LMC-923SP, Feed Through Moulder, 9-Head, 9-1/16" x 6" Capacity, 2-1/8" Spindle, 7200 RPM, 20-260 FPM, 460 V.
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Leadermac
Model: LMC-923SP
LEADERMAC LMC 923SP "SPEEDMAC" Feed Through Moulder 9-Head (B-T-B-R-L-R-L-T-B), working dims 9-1/16" x 6" capacity, with feed speeds of 20 - 260 FPM. -- Head sequence: Bottom 30 HP, top 40 HP, bottom 25 HP, right 20, left 20 HP, right 20 HP, left 20 HP and (opposing), bottom 20 HP and top 25 HP motor. -- Spindles: ...more
Leadermac #LMC623H, moulder with infeed deck
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Moulders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Leadermac
Model: LMC623H MOULDER WITH INFEED DECK
Leadermac LMC-623H Moulder with Infeed Deck, This system has not run in year and will need repair.
Leadermac #Smartmax-523, Moulder, 5-Head, 6000 RPM, 78 FPM Feed Speed, 6' 7" Infeed Table, 400 V., 2008
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Leadermac
Model: SMARTMAX-523
Year: 2008
LEADERMAC SMARTMAC 523. Feed Through Moulder, 5-head;Cast-iron 1-piece machine frame, specially heat-treated, for maximum stability & rigidity.: -- Head configuration: 5-Head (B-R-L-T-U), working capacity 230 x 150 mm (9-1/16" x 5-15/16"). -- Spindle sequence: 1. Bottom 11 kW (15 HP), 2. right 7.5 kW (10 HP), 3. ...more
Leadermac #Smartmax-523, Moulder, 5-Head, 6000 RPM, 78 FPM Feed Speed, 6' 7" Infeed Table, 400 V., 2000
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Leadermac
Model: SMARTMAX-523
Year: 2000
LEADERMAC SMARTMAC 523. Feed Through Moulder, 5-head;Cast-iron 1-piece machine frame, specially heat-treated, for maximum stability & rigidity.: -- Head configuration: 5-Head (B-R-L-T-B), working capacity 230 x 125 mm (9-1/16" x 4-15/16"). -- Spindle sequence: 1. Bottom 7.5 kW (10 HP), 2. right 5.5 kW (7.5 HP), 3. ...more
Lobo 6-head Moulder, 9" Wide capacity
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Moulders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Lobo
Lobo 6-Head Moulder, 9" Wide capacity.
Makor, UV line for mouldings, 2003
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Moulders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Makor
Year: 2003
System includes:, Vacuum Coater, UV Oven with (9) lamps, Lateral Transfer Table, Max width 9", Able to run clear or pigmented coating.
Mattison #229, Push Feed Moulder, 1950' s, 4-Head, 4" x 10" capacity, 2-1/8" T & B spindle diameter & 1-13/16" L & R diameter, 1950' s
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Mattison
Model: 229
Year: 1950
MATTISON 229 Push Feed Moulder4-Head Push Feed Moulder, 4" x 10" capacity. -- Head sequence: 10 HP Top head, 10 HP left head, 10 HP right head, 10 HP bottom head. -- 20 HP feed motor. -- 2-1/8" dia. top and bottom spindles; 1-13/16" dia. left and right spindles. -- Includes (6) extra heads that go with the ...more
Mikron M645, Arch Moulder w/Tilting Spindle, 6" width, 7" thicknes, 1-1/4" spindle, 6000 RPM, 6-1/2" cutting circle, 7.5 HP, 30" x 23" table, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Mikron
Year: 2026
Designed for curved casings, crowns, circles, ellipses and straight mouldings. -- Working dimensions: 6" wide x 7" thickness capacity. -- Spindle diameter 1-1/4" with cutterhead speed of 6,000 RPM. 6-1/2" max. cutting circle in horizontal position, 6" max. cutting circle tilted. -- Feed motor 7.5 HP variable speed 0 - ...more
Mikron M652R, curved moulding shaper w/router, 6" width, 7" thickness, 7.5 HP, 6000 RPM, 6-1/2" cutting circle, 34" x 30" table, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Mikron
Year: 2026
Horizontal Tilting Multi-Moulder with Verical Router System designed for curved casings, crowns, circles, ellipses and straight mouldings. -- : (1) 1-1/4" Diameter Spindle, 6" max. width x 7" max. thickness cap., 7.5 HP spindle motor, 6,000 RPM spindle with reverse rotation, 6-1/2" max. cutting circle horizontal, 6" ...more
MSL Moulder Infeed Conveyor, 12' motorized chain driven - 4 chains
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Moulders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Msl
Infeed Deck & Conveyors., Infeed Deck: 12' motorized chain driven - 4 metal chains., Stationary table with 4 sets of 5.5" rollers for Moulder.
Paulson #6NB, 4-Head Moulder, 6" x 2" capacity, 7.5 HP, 8000 RPM, 1.25" spindle diameter, 10-75 FPM feed system, 1-3 miscellaneous cutterheads, 220 Volts, 3PH
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Paulson
Model: 6 N B
PAULSON - 6NB: 4-HeadThrough Feed Moulder -- 4-Heads (T-L-R-B): 6" x 2" Moulder. -- 7-1/2 HP Motor on the 1st top spindle. -- 7-1/2 HP Motor on the left & right. -- 7-1/2 HP Motor on the bottom spindle. & s -- 3 HP Variable speed feed works with: Feed speeds from 10 - 75 FPM. -- (2) Top & (1) Bottom ...more
Renzo Borgonova, rope moulder & splitter, 2003
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Moulders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Renzo Borgonova
Year: 2003
Renzo Borgonova Rope Moulder and Splitter.
SCM #Profiset-40EP, feed through moulder, 4-head, 19-39 FPM, 2024
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Scm
Model: PROFISET-40EP
Year: 2024
SCM Profiset 40 EP. Feed Through MoulderCompact, space-saving planing and moulding machine for four-sided planing, special price including planing heads.4-Head (B-R-L-T), working width 180 mm, working height 15 mm (7-1/16" x 9/16"). Profiling depth on vertical spindles of 10 mm (3/8"). -- Head sequence: 1. Bottom 7.5 ...more
SCM #Sintex, 4-Head Feed-Thru Moulder, 7" x 4-1/8" planing capacity, 11.8" min. workpiece length, 35 mm spindle diameter, 6000 RPM
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Scm
Model: SINTEX
SCMI SINTEX - 4-Head Feed Through Moulder (B-R-L-T), working cap. 7" x 4-1/8" Planing (S4S). -- Head sequence: Bottom and top 12 HP, right and left 9 HP motor. -- Spindle dia. 35 mm with cutterhead speed of 6,000 RPM. Mechanical digital readouts for all spindles. -- Multiple Feed Speeds via (VFD): 0 or 40 FPM powered ...more
SCM #Superset-NT, feed through moulder, 6-head, 9-7/16" x 4-3/4" capacity, 1.5" spindle diameter
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Scm
Model: SUPERSET-NT
SCM SUPERSET NT. Feed Through Moulder, with 6 heads (B-R-L-T-T-B). -- Machine Structure: Machine bed and top beam are monobloc constructions in thick steel, ensuring high rigidity to achieve a high quality finished product. -- Working Capacity: Max. width 240 mm x height 120 mm (9-7/16" x 4-3/4"). -- Head Sequence: ...more
SCM #Superset-TX, feed through moulder, 7-head, 9-7/16" x 4-3/4" capacity, 1-9/16" spindle
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Scm
Model: SUPERSET-TX
SCM SUPERSET Plus. Feed Through Moulder, 7-head;Superset moulders have the innovative SETUP/2 system fitted as standard making set-up times for tooling changeover up to twenty times faster. -- Machine Structure: Machine bed and top beam are monobloc constructions in thick steel, ensuring high rigidity to achieve a ...more
