Buy or Sell Your 10 Foot Power Squaring Mechanical Shears

LOCATION: GRAND RAPIDS MI, Thickness mild steel: 1/4, Length: 10 ft, Blade, Rake: 3/8 per ft, Length: 10-2 1/2, Section: 3/4 × 3, Back Gage Range: 36, Speed, Full Stroke: 24 SPM, Short Stroke: 60 SPM, Motor: 15 HP, Overall Dimensions, F to B without Front Brackets: 75-1/2, L to R: 145-1/2, Height: 60 ...more

1/4” X 12' 2” Hydraulic Shear with PC - 800 Control, Bosch Rexroth Hydraulic System, Manual Blade gap Adjustment System, Programmable Back Gauge Retract, Transfer Table with Roller Balls, 2 - Edge Upper Blade, 4 Edge Bottom Blade, Patented Dry Ball Joint System (No Grease Necessary), Front Support Arms ...more

Cutting Capacity (Mild Steel): 1/2" x 122" (9/32nds Stainless)Max. Cutting Length: 122"Distance Between Housings: 131"Cutting Angle: 2.1° (Optional Angular Gauge 0°-180°)Stroke Speed (STD/FAST): 9/14 SPMThroat Depth: 10" (Larger Throat Available)Table Height: 35"Oil Capacity: 70 GallonsMotor: 30 HP ...more

-Model: 1224, -Capacity: 0.105" (12 Gauge), -Width: 24", -Blade Rake: 0.437", -Back Gauge: 24", Rear Operated, Manual, -Main Motor: 1.5 HP, -Strokes Per Minute: 85, -Floor Space: 33" x 55", -Weight: 2,865 lbs., -In Storage: Toledo, OH..

Tonnage 35 Tons Punching Pressure 35 Tons Shearing Capacity (Flat Steel) 150 X 8 Mm Shearing Capacity (L-beam) 90 X 8 Mm Punching Capacity (Round Bar Steel) 30 Mm Punching Capacity (Square-edged Steel) 28 Mm Total power requirement 2.8 KW WEIGHT Approximately 0.5 Tonnes (500 Kg) Dimension 0.75 M (W) X 1.0 M (H) X 1.5 ...more

Shearing Capacity: 1" x 12", 3/4" x 16", 1/2" x 24" Type Hydraulic Strokes Per MInute Full Stroke 12 Half Stroke 30 Optional Equipment Available: Part# Work Light 90390 Optional UL Approval 5710 Single Phase Motor (10 HP, 220 Volt) 13500 Throat 5" Horsepower 10 H.P. Dimensions ( W x L x H) 32" x 48" x 70" WEIGHT 3,100 ...more

Inventory No. 1125-085-0002 Manufacturer Amada Model No. S-1232 Name Shear Arrival Date 12-30-2025 Dimensions L x W x H (inches) Unavailable Capacity 53" Electrical 3/50/60/400/460 Weight (lb.) 4915 Category Fabrication Condition Used Available Quantity 1 Serial No. 12321352 Item Made In Japan, W/tooling/hardware ...more

SERIAL. A874803 MODEL. 250-10A CAPACITY, MILD STEEL. 1/4" LENGTH OF CUT. 10'4" FRONT OPERATED POWER BACKGAUGE. 36" BACKGUAGE DAUL SPEEDS. FAST & SLOW NUMBER OF HOLD DOWNS. 9 DOWN SPEED. 220 IPM RETURN SPEED. 293 IPM ELECTRIC FOOT TRIP. YES MOTOR. 25 HP.

1- USED TENNESMITH MODEL A3616 PNEUMATIC 16 GAUGE X 36" SHEAR.

¼” X 10’ Hydraulic Shear with Foot Pedal Control., Capacity: ¼”, Cutting Length: 120”, Approx Dimensions: 12’ X 7’ X 6’, Approx Weight: 15,000 Lbs, INCLUDES: Foot Pedal Control., ***We strongly encourage personal inspection of all pieces of used equipment*** ...more

3/8’’ x 10 ft. cap., 39’’ power backgauge, Adjustable rake angle, Rapid blade gap adjustment.

Pre Owned Accurshear Model 62506 Hydraulic Power Squaring Shear, Capacity (Mild Steel) 1/4” X 6’, Strokes Per Minute 30 – 55, Main Motor Horsepower 20, Stroke Length Control, Electric Foot Switch, Hand Slots in Table, Oil Cooler, Manual Quick Blade Gap Adjustment, Dual Hydraulic Hold Downs on Ends of ...more

Standard : Capacity In Mild Steel. 10 ga. Cutting Length. 10' Motor HP. 5 Strokes per Minute. 65 Back Gauge Range. 36" Number of Hold Downs. 11 Hold Down to Blade Edge. 5/8" Standard Distance Under Holddowns. 1/4" Total Holddown Force. 7 tons Rake Angle. 7/32" /Ft. Size - Four Edge Blades. 1" x 3" Approximate ...more

¾” X 12’ Accurshear with Front Operated Power Backgauge, Power Stroke Length Control, Squaring Arm, Oil Cooler and Electric Foot Pedal., Capacity: ¾” X 12’, Number of Hold Downs: 19, Back Gauge Range: 48”, Full Stroke: 25, Short Stroke: 25, Dimensions: 184” X ...more

Product Information, Ironworkers PRODUCT NEW - ON REQUEST: Type:Hydraulic Work stations:5 1.- Punch:1'-1/8" x 1" 2.- Bar shear:Round: 2", Square: 1-3/8" 3.- Plate shear:1" x 8", 3/4" x 12", 1/2" x 18" 4.- Angle cut:5" x 5" x 1/2" 5.- Notcher:3-1/2" x 5" x 3/8" Voltage / Phase:220 | 3 Weight:4,250 lbs ...more

SERIAL. SHC87-M1072, MODEL. G-12S-48, YEAR NEW. 1987, CAPACITY.020 TO.034, WIDTH. 48", MISSING HYDRAULIC PUMP SHEAR ONLY.

SERIAL. 87501514, MODEL. 2-1/2B, YEAR NEW. 1977, PUNCHING CAPACITY. 105 TON, PUNCH CAPACITY:. 1-7/16" THRU 7/8", PUNCHING CAPACITY. 1-5/16" THRU 1", DEPTH OF THROAT. 24", SHEAR CAPACITY PLATE. 3/4", SHEAR CAPACITY FLATS. 7/8" X 6" TO 13"X 1/4", SHEAR CAPACITY ROUNDS. 2-1/4", SHEAR CAPACITY SQUARES. 2", 90 DEGREE ...more

Used MAsteel MIWH-80. This pre-owned Ironworker is in great working condition and can be securely delivered to your facility floor. If you have any technical questions about this MAsteel Ironworker we can review machine. To request a quote, inquire about rigging and trucking or to schedule an inspection, contact us ...more

NEW GEKA BENICROP 50 HYDRAULIC IRONWORKER FEATURING A BUILT-IN BENDING SYSTEM, The Bendicrop 50, part of Geka’s Bendicrop Series of hydraulic ironworking machines, s a single cylinder and six workstations. The six workstations include a built-in bending station that makes the Bendicrop machines unique in the ...more

” X 10’ Hydraulic Shear with CNC SC100T Pendant Control, Squaring Arm, Swing Away Back Gauge, Automatic Blade Gap Adjustment and Shadow Light, Working Length: 123”, Capacity Mild Steel: 3/8" (80.000 PSI), Min. Cutting Angle: 0.5°, Max. Cutting Angle: 3°, Number Of Hold Downs: 18, Working ...more

CNC Controlyes Dimensions7'8"W x 6'W x 10'6"L Weight20500 pounds, Serial. 905219, Model. SSB250-8, Capacity. 1/4", Length. 96".

(1) Used 10ga x 72" Chicago/Dries & Krump Hydraulic Shear.

Cutting Capacity (Mild Steel): 3/8ths x 13' (7/32nds Stainless)Max. Cutting Length: 157"Distance Between Housings: 167"Cutting Angle: 1.5° (Optional Angular Gauge 0°-180°)Stroke Speed (STD/FAST): 11/17 SPMThroat Depth: 10" (Larger Throat Available)Table Height: 35"Oil Capacity: 70 GallonsMotor: 30 HP ...more

S:, Front operated power backgauge with mechanical readoutAuto/semi-auto / Manual cycle selector switchAdjustable rake angleMotorized blade gap adjustment13” side frame gapRoller balls in table:, 60” Squaring arm with support leg2 Front support armsFlip up blade safety gate, MODEL: GST-430, CAPACITY: ...more

Product Information, Shears Type:Hydraulic Backgauge:Motorized HP:25 Phases:3 Dimensions:81" x 165" x 90" Capacity:12' x 1/4", Product Code: 03040117128 Make: HTC Model: 250-12A Serial Number: A1173720 Condition: Used.

ROWE 60" X.065 HYD BLANKING SHEAR, STOCK# 13685JC, NEW 2002, MODEL HS-SHR-60, S/N R031552, CAPACITY 60", THICKNESS.065, SPEED 40 SPM, CONTROLS, HYD UNIT.

90 ton Piranha P4 Hydraulic Ironworker, Punching tonnage 90, Punching capacity 1-1/8” diameter through 1” plate, Throat Depth 10”, Rated for mild steel 60,000 PSI tensile strength, Round Bar Shear 2”, Square Bar Shear 1-3/8”, Plate Shear 20” x 1/2”, 18” x 3/4” ...more

¼” X 10’ Hydraulic Shear with Front Operated Backgauge, Power Blade Gap Adjustment, 10’ Squaring Arm and (2) Front Arm Supports., Max Capacity: ¼” X 10’, Max Stroke Speed: 23 SPM, Hold Down Count: 16, Drive Motor HP: 20 HP, Approx. Shipping Weight: 20,000 Lbs, Approx. ...more

SERIAL. 47088 NEW. 1992 MODEL. 500 HS 10 CAPACITY. 10' X 1/2" CUTTING LENGTH. 122-3/4" MAXIMUM RAKE. 1/2" PER FOOT HOLD DOWNS. 13 HYDRAULIC HOLD DOWN FORCE. 20.6 TONS FRONT OPERATED POWER BACK GAUGE. 48" SPEED. 19 TO 53 STROKES PER MINUTE FLOOR STANDING. YES, BACK GAUGE MOTOR. 1/2 HP MOTOR. 25 HP.

SERIAL. 1245652, NEW. 1983, MODEL. M-1245, CAPACITY.187" (3/16) MILD STEEL, LENGTH OF CUT. 48.8", BLADE LENGTH. 52.7", SPEED. 75 SPM, MANUAL BACK GAUGE. 39.37" REAR OPERATED, GAP. 2.56", HOLDDOWNS. YES, NUMBER OF HOLDDOWNS. 5, FOOT PEDAL. YES, LUBE SYSTEM. YES.

, MANUFACTURER. STANDARD, MODEL. AS250-14, NEW. 1993, SERIAL. 293278, NOMINAL CAPACITY MILD STEEL. 1/4" x 14', OPERATION. HYDRAULIC, NUMBER OF HYDRAULIC HOLD DOWNS. 15, OVERALL SIZE D x W x H. 6 1/2' x 14-1/2' x 8', APPROXIMATE WEIGHT. 37,000 LBS., VOLTAGE. 240 VOLTS, FRONT OPERATED SWING AWAY ...more

Product Information, Shears Type:Hydraulic Backgauge:Motorized HP:15 ::Phase: 3 Year:1985 Dimensions:90" x 138" x 83" Capacity:10' x 1/4", Product Code: 03040117114 Make: Pullmax Model: E 23D Serial Number: 3540 Condition: Used.

Geka 120 Ton CNC Deep Throat Dual Cylinder Hydraulic Ironworker, Hydracrop 110SD, Inventory # 9882, Model: Hydracrop 110SD, S/N: 21237, Punching Power: 120 US Tons, Throat: 24″, Max. Capacity: Ø 1 1/2″ x 3/4″, Shearing Power: 180 US Tons, Shearing Capacity:, Flat Bars and Plates: 24″ x ...more

Wysong Model 1636 Foot Stomp Shear, designed for precision, handles up to 16 gauge material with a 36" cutting width. Ideal for workshops requiring reliable power squaring shears. Used condition ensures affordability for quality machinery., WYSONG 1636, Max Gauge. 16 gauge.

Sesco Hydraulic Production Shear, Was Used in a Cut-to-Length, Model 54-171, Capacity: 0.015" - 0.060" x 60" Wide, Bowtie Top Blade, Straight 4 Edge Blade on bottom, Hydraulic Cylinder Actuated, (2) - 5" Bore x 2.5" Stroke Cylinders, Passline Height: 55", In Storage: Toledo, OH.

SERIAL. M-10601, MODEL. S-250072640, YEAR NEW. 1982, CAPACITY. 1/4", LENGTH OF CUT. 73", FRONT OPERATED POWER BACK GAUGE. 48", FRONT ARM SUPPORTS. 2, ADJUSTABLE RAKE. 3/8" PER FT, NUMBER OF HOLD DOWN. 8, HOLD DOWN PRESSURE. 24 TON, RAM SPEED DOWN. 3.06 PER SECOND, RAM SPEED UP. 5.03 PER SECOND, STROKES PER MINUTE FULL ...more

Used 2022 Erbend EMS3220 Shear, Max Thickness (gauge) 14 gauge Length of Blade 10.5' Dimensions 1950 X 3750 X 1600 Weight 4,431 lbs Control CNC (NC) Spec Sheet, Cutting Length: 10.5 ft (3200mm), Mild Steel: 14 ga (2mm), Stainless: 18 ga (1.2mm), Aluminum: 3mm, Cut per minute: 35, Motor Power: 4Kw.

Rated Capacity 10' X 1/2" Mild Steel Maximum Angle 5/8" X 8' Gap In Frame 12" Stroke Rate 18 To 33 SPM Cutting Rake Angle 0.5 To 4 Degrees Distance Floor To Bed Height 37" s Material supports with ball roller Square Arm.

¼” X 10’ Hydraulic Shear with SP8 Controls, Motorized Backgauge, 42” Squaring Arm, Rake Angle Adjustment, Blade Gap Adjustment, Hold Downs and 2 New Sides Left On Knives, Capacity: 1/4" X 10’, Backgauge Range: 30”, Motor: 15 HP, Voltage: 220 / 440, Approximate Weight: 13,000 ...more

CAPACITY ---------------------------- 1/2 in, CUTTING LENGTH ---------------------- 6 ft, MAIN MOTOR -------------------------- 30 H.P., ELECTRICS --------------------------- 230-460 VOLT 3 PHASE, 6 HOLD DOWNS, FOOT PEDAL, NOTES:, SUBJECT TO VERIFICATION, * NO BACKGAUGE, DELIVERY:, IMMEDIATE, SUBJECT TO PRIOR SALE.

140 Ton X 12’ Ironworker with Automatic Hold Down, Coupling Wrench, Punch Holder, Stripper, & Die Block, 3/8” Allen Wrench, 5 Punch & Die Sets 9/16” through 1-1/16”, Set of Chip Buckets, Set of Angle Knives, Extra Filter Element, Set 1-1/4” Round Bar Knives, Foot Switch, Set of ...more

SERIAL., MODEL., CAPACITY. 1/4" MILD STEEL, LENGTH OF BLADE. 10'2", STROKES PER MINUTE. 60, FRONT OPERATED BACK GAUGES. 36", RAKE. 5/16" PER FOOT, HOLD DOWNS. 17, SQUARING ARM. YES, FRONT ARM SUPPORTS. 2, CENTRAL LUBE. YES, HORSEPOWER MAIN MOTOR. 10,..

Make: Cincinnati, Model: 1412, Year: 1900, Machine Location: California, Capacity (Mild Steel): 3/16″, Max. Cutting Length: 12′, Rake Angle: 1/4″, Number Of Hold Downs (Hydraulic): 13, Throat Gap: 18″, Back Gauge Range: 36″, Strokes Per Minute: 60, Dimensions (L x W x H): 183″ x ...more

Make: Pacific, Serial # 1090, Model: 375R12, Maximum Width: 12', Max Material Thickness: 3/8", Knife Length: 144, Distance Between Housing: 12.5, Electric Back Gage.

Product Information, Ironworkers PRODUCT NEW - ON REQUEST: Type:Hydraulic Work stations:5 1.- Punch:1-1/16" x 3/4" 2.- Bar shear:Round: 1-1/2", Square: 1" 3.- Plate shear:3/4" x 10", 5/8" x 15" 4.- Angle cut:5" x 5" x 3/8" 5.- Notcher:2-3/4" x 4" x 1/4" Voltage / Phase:230, 460 | 3 Weight:2,600 lbs Dimensions:24" x ...more

Make: Durma, Model: IW-110, Year: 2012, Machine Location: Utah, 15HP, -100″x44″x90″, -121 Ton Punching Press, -1.6″ Dia x 3/4 Thick Punching Capacity, -24″ Throat Depth, -31″ Stroke Length, -28 Cycles per Minute, -49.6″ Working Height, FLAT SHEAR, -16″ x 3/4″ Flat ...more

NEW GEKA BENDICROP 85 HYDRAULIC IRONWORKER, The Geka Bendicrop 85 is the Bendicrop Series model that offers the most punching power (93 US tons). Metal fabricators and construction companies will find the machine useful in performing simple bending operations., Bendicrop 85 Hydraulic Ironworker Machine with an ...more