Buy or Sell Your Vertical Lathe

Machine Type.Saws, Band, Vertical Manufacturer.DOALL Model.V-26 Year.N/A Condition.Used.

Condition UsedStock Number 47518888051.

Spec Sheet:, Buck 10" - 4 Jaw Chuck w/ D1-8 Mount, USED, Brand: Buck, Overall Diameter: 10, Jaws: 4, Back: D1-8 Mount, 6 pins, Through Hole Measured: 3.

Rohm 35" hydraulic 3 jaw chuck, Model: KFD-HS 900/3, OD: 35", ID: 19", Houston, TX., Subject to Prior Sale., This chuck is virtually new. It came off of a Johnford CNC lathe sold to a Houston shop for the manufacture of drill bits., It was in limited use for a few short months and the project was abandoned..

, Pratt Burnerd International 12in 3 Jaw Chuck for sale. Used condition, ideal for lathe operations. Overall diameter: 12in, center hole: 4in, thickness: 4.5in. Catalog No: 1211-43215, Stamped No: E51709. Suitable for tooling and accessories., Spec Sheet:, Pratt Burnerd International 12 inch 3 Jaw Chuck, USED, Brand: ...more

SERIAL.: K-8572-52, SWING OVER BED.: 36", SWING OVER CROSS SLIDE.: 19", DISTANCE BETWEEN CENTERS.: 168", SPINDLE SPEEDS.: (16) 9.5 - 692, CHUCK DIAMETER.: 32" 4 JAW, THRU HOLE.: 3", TAPER ATTACHMENT.: YES, INCH/METRIC THREADING.: YES, COOLANT.: YES, STEADY REST.: YES 16" AND 10", MOTOR HP.: 20 HP, Machine Type.Lathes ...more

Distance Between Centers. 240", SAMSTAR 40 X 240, Swing. 40", Centers. 240", Spindle Bore. 5", Power. 20 hp, Swing Over Cross Slide. 28.313".

27' BED LENGTH, 17,000 LBS. FOOTPRINT 60" X 80" X 396".

TRAUB TNL-26 Swiss Type CNC Lathe (used) New 2001 w/ LNS Express 326 magazine bar loader, mist collector, chip conveyor, tooling., 2001 TRAUB TNL 26, Spindle Hole Dia. 26 mm.

Haas TL-2 Lathe, Asset # 17789.

Available for sale is a vertical inlet separator manufactured by NUSCO Supply in 2002. This portable unit s a diameter of 16 inches and a maximum pressure rating of 1480 psi, suitable for sweet service applications. The separator has dimensions of 6.5 ft in length and is housed within a heated building located in ...more

This is a Dual Separator Package featuring a 30-inch and a 24-inch vessel, along with a robust 100 BBL Fiberglass Tank. The package includes a vertical separator manufactured by Orban Industries Ltd. in the year 2000, with operational of max temperature at 100°F and max pressure at 720 psi. Located in Red Deer ...more

For sale: DYNACORP vertical sand separator, model number U7770.213, built in 2012. This portable unit s a maximum temperature of 300°F and a maximum pressure of 170 psi. With a diameter of 48 inches and a separator length of 6 feet, it is ideal for sour service applications. Currently located in Grande Prairie ...more

Available for sale is a secondary high-pressure vessel with a maximum pressure of 170 PSI and a maximum temperature of 300°F. This vertical portable vessel was built in 2011 and s a diameter of 48 inches, with a corrosion allowance of 0.125 C.A. It is designed for sour service and is currently in disconnected ...more

This is a second high pressure vessel with a maximum allowable working pressure (MAWP) of 5000 PSIG at 400°F. It s a vertical design with a diameter of 48 inches and operates in sour service conditions. Manufactured by Dynacorp in 2010, it has a maximum pressure rating of 170 PSIG and is constructed as per CRN ...more

Available for sale: High Pressure Vessel with a maximum pressure of 170 PSIG and a maximum temperature of 300°F. Model U7770.213, built in 2010 by Dynacorp, s a diameter of 48 inches and is designed for sour service. The vessel is portable, disconnected from service, and has a corrosion allowance of 0.125 inches. ...more

ROCKWELL 20" Vertical Band Saw #8035 #1, Throat Depth: 20", Vertical Clearance: 12", Table Size: 20" x 24", Main Motor: 1 HP.

2012 STAR SB-20R TYPE E CNC Swiss Lathe for sale. s 20 mm capacity, 3.7 kW power, and 10,000 RPM. full C spindle indexing. Includes 6 tools weighing 1,700 kg. Compact design: 1,895mm x 1,133mm x 1,750mm. Ideal for precision work., MAX. HEADSTOCK 183MM, STROKE REVOLVING GB 155MM, MAX. DRILLING CAPABILITY 10MM, RAPID ...more

This used Vertical Tubeless Boiler is, for sale and in great working condition, condition: good, C392021-M668,., Location: Colorado.

S/N HI-00186, Asset # 16671, 7′ high x 58″ wide x 51″ Deep.

Spec Sheet:, Wellsaw Model V20 Vertical Bandsaw, Throat: 20" Deep, Table to Guide: 16" High, Blade Size, Std.: 3/16" through 3/4", Optional:1/2" through 1", Blade Length: 14' - 9' (177"), Band Wheels : 21" Cast Aluminum with replaceable rubber tires, Blade Speeds, Low Range: 45-400 SFPM, High Range: 325-3000 ...more

Victor 616 Precision Lathe available. Used condition with a 9" swing, 18" centers, and 3500 RPM power. Threading not included. Ideal for precision tasks, powered by a 2.0 unit for efficiency., VICTOR 616, Swing. 9", Centers. 18", Threading. no, Power. 2 hp, RPM. 3,500 RPM.

, Model: TL-3W, Serial Number: 3083002, Year: 2008 (07/2008), Control: Haas Classic CNC Control (ColdFire processor generation), Electrical, Voltage: 208/230 VAC, Phase: 3-Phase, Frequency: 50/60 Hz, Full Load Current: 30 A, Largest Load: 70 A, Capacity & Travels (factory design ), Maximum Swing Over Bed: approx. ...more

9"x42" MSC vertical milling machine, variable speed, ready to go..

See attached pdf for ed BROCHURE and, SAMSTAR 40" X 160" LATHE, Swing. 40", Centers. 160", Spindle Bore. 5", Power. 20 hp, Swing Over Cross Slide. 28.313".

MONARCH MODEL 36"NN ENGINE LATHE Price: $7,950 Subcategory: Engine Lathes Swing: 36" Centers: 108" Year of Manufacture: 1946 Manufacturer: Monarch Model: 36" NN Condition: Used, 3 JAW CHUCK, 8" QUILL.

32" 4 Jaw Chuck, 30" 3-point Roller Steady Rest, *All are subject to buyer review.

LODGE & SHIPLEY 40" x 77" HEAVY DUTY ENGINE LATHE, MODEL# 25"/35", SWING OVER BED: 40", SWING OVER CROSS SLIDE: 30", DISTANCE BETWEEN CENTERS: 77", SPINDLE SPEEDS (25): 9 - 507 RPM, SPINDLE HOLE BORE: 2-1/2", MAIN MOTOR: 30 HP, THEADING: INCH ONLY, ELECTRICS: 220/440V, 3-PHASE, WEIGHT: 20,000 LBS, DIMENSIONS ...more

, Machine Axis:, X1, X2, Y1, Z1, Z2, Spindle Drives & Motors:, S1,S2, 3 Main side live cross working attachments, Rotating guide bushing, Machine Hours:, 30116.

Manufacturer TsugamiModel SS207-IIYear 2017Condition UsedStock Number 47518888030.

, Pratt Burnerd 12" 3 Jaw Chuck, A1-6 Mount, used condition. s 12" overall diameter, 3" center hole. Ideal for lathe operations. Catalog #1271-53215, Stamped #E41170., Spec Sheet:, Pratt Burnerd International 12 inch 3 Jaw Chuck, USED, Brand: Pratt Burnerd International, 3 Jaws, Type: Lathe Chuck, Overall Diameter: ...more

SERIAL. SE19647, MODEL. FTV-1S, AREA OF TABLE. 44" X 9", LONGITUDINAL TABLE TRAVEL. 30", CROSS TABLE TRAVEL. 16", VERTICAL KNEE TRAVEL. 16", RAM TRAVEL. 22-3/16", QUILL TRAVEL. 5", SPINDLE SPEEDS (VARIABLE). 55 TO 4200 RPM, SPINDLE TAPER. R-8, SPINDLE FEEDS.0015 -.003 -.006 IPR, 1 SHOT LUBE. YES, MOTOR. 3 HORSEPOWER.

QuickTECH T8 Twin-Y Multi-Axis CNC Turning Center (subject to buyer verification):Main Spindle CapacitySwing over cross slide 11.8”Maximum bar working capacity 2.56” (65mm)Maximum turning length 13.8”Spindle nose A2-6Hole through draw tube 2.6” (66mm)Spindle speed range (std.) 4000 RPMSpindle ...more

Available for sale is a vertical separator designed for sweet service, manufactured by CRIMTECH SERVICES. It s a diameter of 12 inches and operates under a maximum pressure of 1480 psi. Built in 1999, this unit is housed in a heated building with dimensions of 6.5 ft length, 2 ft width, and a height of 3.3 ft. The ...more

Available for rent, this portable vertical gas separator s a diameter of 16 inches and is designed for sweet service types. Manufactured by RJV GASFIELD SERVICES in 2012, it has a maximum pressure rating of 1480 psi and operational status is connected. The separator measures 2285 mm in length, housed within a heated ...more

This is a Peco Model 75V-4-FG324-16-1416-WP gas filter separator designed for sour service. It s a diameter of 16 inches and an overall length of 9 feet 6 inches, constructed with SA-106-C shell material and SA-516-70N head material. The unit has a maximum pressure rating of 1416 psi and operates at temperatures up to ...more