Buy or Sell Your Makino A51

MANUFACTURER - BLISS, CONFIGURATION - 2HI, TYPE - ONE WAY TEMPER, WIDTH RANGE - 4" - 20", THICKNESS RANGE - 0.008" -.250" ALUMINUM / 0.019" -.200" STEEL, ROLL DIMENSIONS- 20" DIAMETER X 22" FACE, COIL ID/OD - 20" ID ENTRY/EXIT, 60" OD ENTRY/80" OD EXIT, LINE SPEED - 900 FPM, MAIN MILL MOTOR - 450 HP DC, 600/1200 RPM ...more

MARATHON - Gemini : Horizontal Closed Door Baler (Full Pen) : -- Bale size: 30" x 48" x 60". -- Charge box: 35" x 60". -- Cylinder: Dual 6". -- Main motor: 20 HP.

2021 TSUGAMI B075-III, BAR CAPACITY. 7 mm, MAX HEADSTOCK STROKE. 2.76", MAIN SPINDLE MOTOR. 2 hp, MAIN SPINDLE INDEXING. FULL C-AXIS, MAIN SPINDLE SPEED. 15,000 RPM, BACK SPINDLE MOTOR. 3 hp, BACK SPINDLE INDEXING. FULL C-AXIS, BACK SPINDLE SPEED. 12,000 RPM, TOTAL TOOL CAPACITY (POSITIONS). 21, TOTAL LIVE TOOL ...more

The 2-axis Automec CNC300 Control can store up to 300 jobs with each job can storing up to 10 bends. Additionally, the CNC300 Control can support job linking, which would allow more complex parts to exceed the 10-bend limit by chaining programs together., TONNAGE: 325, OVERALL LENGTH OF BED & RAM: 144", DISTANCE ...more

Industrial PLC Motor Control Cabinet – 50 HP Class, 600 V, Complete industrial control cabinet removed from service. Originally used to operate multiple 50 HP motors via VFDs (VFDs not included). Cabinet includes AutomationDirect DirectLOGIC PLC with I/O and ZIPLink terminations, Schneider Electric motor ...more

2019 NOMURA DS NN-32YB3XB, Spindle Hole Dia. 1.46", Max Machining Dia. 1.26 in, Max Machining Length. 7.48 in, Max Drilling Diameter. 0.51 in, Max Tapping Diameter. 0.39 in, Main Spindle Motor. 7.38 hp, Main Spindle Speed. 8000 rpm, Back Spindle Motor. 4.96 hp, Back Spindle Speed. 8000 rpm, Dimensions. 89.69" x 65.2" ...more

The Allen-Bradley 700DC-P200Z2 is a Bulletin 700-P heavy duty industrial DC control relay configured with two normally open contacts on an open type relay rail mount. The nameplate identifies a 230 to 250V DC coil rating with a Series F revision, manufactured in Mexico by Rockwell Automation under material number ...more

MAZAK QTN-250MSY CNC Turning Center with Sub-Spindle, Live Tooling, and Y-Axis, NEW: 2006, MAX. SWING.26.5", MAX. TURNING DIA.14.00", MAX. TURNING LENGTH.21.28", MAIN SPINDLE C-AXIS.0.001" N/C CONTOURING, MAIN MOTOR.35 HP AC, SPINDLE NOSE.A2-8", SPINDLE BORE.3.46", MAX BAR CAPACITY.3.00", SPINDLE SPEEDS.4000 RPM ...more

Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Fanuc i Series CNC Control, 4,736 Hours Cutting ...more

Matrix Control| 1000PSI Super Flow pump| Simultaneous 5-axis|, Used 2007 Mazak Variaxis 500-5X II: A robust 5-axis machining center featuring Mazatrol Matrix control, simultaneous A/C axis motion, 12,000 rpm spindle, 40-station ATC and coolant-thru-spindle capabilityperfect for complex, high-precision production, No ...more

The No, 516 Hypoid Lapper is designed primarily for lapping automotive and truck spiral bevel and hypoid gears and pinions operating at a 90" shaft angle with gear diameters up to 24" (609.6 mm).The No. 516 Hypoid tapper affords fast lapping times, high quality, accurate control and great flexibility, Most important ...more

Qty 1, TOMOE TDM050, 125HP Main drive, 20HP Back drive, 8.5° Beach Angle, 18 x 75 Inch bowl, 152:1 Gearbox, COMPLETELY RECONDITIONED - scroll got 2 full wraps of new tiles, new feed zone liners, upgrades to pillow blocks to prevent against washing out the bearings, all new powder coat on frame, new electrical ...more

85 TON PUNCHING CAPACITY, SPECIALTY TOOLING 4" MAX DIAMETER, 10" THROAT DEPTH, FLAT SHEAR 20" X 3/4" 12" X 1", ANGLE SHEAR 90 DEGREES 6" X 6" X 1/2", ANGLE SHEAR 45 DEGREES 4" X 4" X 1/2", BRAKE 12"-24" 85 TON, OPEN END BRAKE MAX 1/4" X 5" FLAT ON ANGLE IRON, PIPE NOTCHER SCHEDULE 40 3/4" X 1", 1.25", 1.5", 2" ...more

used- alfa laval / sharples pm-70000 super-d-canter solid bowl decanter centrifuge, (same size as a p-5400), stainless steel construction (product contact areas). 5" single lead conveyor, base, casing, gearbox, 200 hp main drive motor, lubrication pump system.

Insta-Pro Model 2000 continuous oil press designed for production of vegetable oils from oilseed materials including soybean, canola, and sunflower. Unit utilizes a screw press design to mechanically extract oil while producing a consistent press cake byproduct. a 30 HP main drive and 3 HP feed drive, and featuring a ...more

Manufacturer Siemens / Allis Chalmers Product Family WL Type of Low Voltage Indoor Air Switchgear WL Main Bus Amps 1600A.

Manufacturer Square D Product Family POWER ZONE Type of Low Voltage Indoor Air Switchgear MASTERPACT Main Bus Amps 3200A Control Section Yes Shipping Width 30 in Shipping Height 92 in Shipping Depth 81 in.

used- alfa laval / sharples pm-3600 super-d-canter centrifuge. 316 stainless steel construction (product contact areas), maximum bowl speed 3500 rpm, 4-1/2" single lead conveyor, liquid plate dams, gearbox 125:1 ratio, base, casing, approximate 37kw (49.6hp) main drive motor (380/50/3), back drive moto. mounted on a ...more

Jacobson model 8TN-11 row hammer mill with 200 HP drive. Unit has 8" x 36" infeed and 24" x 38" discharge. Mounted on carbon steel frame, mill is complete with 1 HP feeder and model R810, type A, size 16 magnetic separator, main drive is 3560 RPM, 230/460V, feeder drive is 1 HP, 208-230/460V, 1750 RPM to gearbox. Unit ...more

Helical Main Gear 2 Pieces262 Teeth x 17 in.Pinion Gear18 Teeth x 17 in.Chute Feed/Overflow DischargeLube Pump: Spray on Lube GearAir ClutchBearingsRod ChargerUsing 500 HP Synchronous Motor @ 300 RPM (Not Available - Damaged)Bearings - GoodRubber Lined (Condition Not Known)Shell Holes Good - No Cracks/Breaks/ or Fixes ...more

Jones vertical screw press, model P-225, type 2512, with all wetted parts being stainless steel. Unit 20 HP main drive thru gearbox, frac HP, drive on the shaker discharge assembly and air cylinder to operate the solids discharge cone. Include main screens, backup screens, reinforced poly outer doors / covers and ...more

Collette Model GRAL 25, High speed, high shear stainless steel, vertical, single pot, GAMP, R & D, granulator, with gross bowl volume capacity of 27 liters and typical batch weight of 11 @ 0.6g/ml (kg). 316 stainless steel construction. removable stainless steel process vessel and has dimensions of 14" ID x ...more

Edge Rebel Barfeeder| Royal Collect Chucks| Live Tool Holders, The DN Solutions Lynx 2100LSYB CNC Lathe (2023) with Fanuc i Series control delivers high-precision turning for automotive, medical, and aerospace industries. Ideal for producing shafts, gears, and hydraulic components efficiently in a single setup with ...more

Timesavers Model 2331-24-066 Three Head 43" Segmented Widebelt/Polisher : Abrasive belt size: 43 x 75" Main motor first head: 25HP Main motor second and third heads: 20HP Maximum width stock: 42" Minimum part size: 6 x 6" with Vacuum Maximum thickness opening: 5" Infeed loading area: 14" Feed speed: 15-45 FPM ...more

ZAFFARONI MLS 130 P PD MULTI-BLADE PANEL SAW: -- Zaffaroni is the Top of the Line in Precision Multi Rip saws for Panels. Blade Depth is mechanically adjustable with a tolerance of =- 0.01 mm (0.0004"). The saw is so precise it can also be used for "V" grooving.The Saw blades project through the table from below. A ...more

The Kaeser ANKCF25 is an oil/water separator designed for condensate management in compressed air systems. It carries the model designation KCF 25 and is manufactured in Germany for Kaeser USA. The unit is rated to handle up to 110 SCFM and is sized for use with compressors up to 25 HP. Per published Kaeser, the KCF ...more

ITE Siemens FC-II Switchboard 2500A 208/120V 3PH 4W 2500 Amp 3 Phase, Main Lug Panel MLO w 1 Distribution Section.

Pure Loop Reclaim System With Integrated Shredder-Extruder Combination Model EVO 302 E Estimated Output Per The Manufacturer: 800-1,000 LBS/HR PA 6.0 Pa6.6 800-1,000 LBS/HR PET Infeed Belt Conveyor With Double Layer Metal Detector Twin Screw Volumetric Feeder For Powder Shredder With 29" X 35" Cutting Chamber, 29.45" ...more

The Doosan Lynx 220A CNC Lathe (2006) with Fanuc control is a compact, high-performance machine ideal for high-speed precision turning of small-to-medium-sized components. Perfect for production runs, it excels in turning, drilling, and tapping metal parts. Commonly used for producing shafts, flanges, and other ...more

Under Power! Readily Available!, The Doosan Lynx 220A CNC Lathe (2006) with Fanuc control is a compact, high-performance machine ideal for high-speed precision turning of small-to-medium-sized components. Perfect for production runs, it excels in turning, drilling, and tapping metal parts. Commonly used for producing ...more

Manufacturer Westinghouse / Cutler Hammer Product Family MDS Type of Low Voltage Indoor Air Switchgear POW-R-LINE C Main Bus Amps 3000A Shipping Width 40 in Shipping Height 96 in Shipping Depth 90 in Shipping Weight 1500 lb.

Manufacturer Westinghouse / Cutler Hammer Product Family MDS Type of Low Voltage Indoor Air Switchgear POW-R-LINE C Main Bus Amps 4000A Shipping Width 40 in Shipping Height 96 in Shipping Depth 90 in Shipping Weight 1500 lb.

SERIAL.4FM-381-48-E, MODEL. FMD-4LR, CAPACITY. 4 CUBIC FT, LOAD CAPACITY. 1200 LB, PART LENGTH STRAIGHT. 18" MAX, CHANNEL WIDTH. 10", CANNEL DEPTH. 12.5", HEIGHT. 41", PARTS SHOOT DIAMETER. 6", SURRLY DRAIN YES, POLYURETHANE LINING. YES, MAIN DRIVE MOTOR. 2.5 HORSEPOWER.

Laser Maker:, Ultra Violet Laser, Custom Design Bean Delivery System, Precison Character Mask System, Class 1 Laser Product To Use On Open Shop Floor, Print :, Up to 100 Characters Per Identification Mark As Standard, Full Alpha-Numeric Character Set A-Z (upper case), 0-9 Plus Extra, Characters(50 in total), Two Print ...more

Make: Clausing Colchester, Model: 15, Year: 1982, Machine Location: Kentucky, (subject to buyer verification):, Swing: 15″, Centers: 50″, Spindle Bore: 2.125″, Power: 7.5 HP, Spindle Speed: 2,000 RPM, Power: 230V / 3 Phase / 60 Cycle, Main Motor: 7.5 HP.

The Mazak VCN 530/5AX 5-Axis Machining Center (2015) with Mazatrol Matrix 2 control delivers exceptional precision and productivity for complex multi-surface machining. Designed for aerospace, medical, automotive, and mold & die applications, it excels at simultaneous 5-axis contouring, deep cavity milling, and ...more

The Allen Bradley 808-M3 is a high speed electromechanical speed switch from the Bulletin 808 product line, designed for use in motor control and machine protection applications. This Series F unit s a 4 point flange mounting configuration with normally open (N.O.) contacts and is housed in a NEMA Type 1, 4, and 13 ...more

SERIAL. 09010692, MODEL. MA35160, YEAR NEW. 2009, SWING OVER WAYS. 34.6, SWING IN GAP. 53", DISTANCE BETWEEN CENTERS. 160", SPINDLE SPEEDS. 4 TO 315 RPM, ENGLISH THREADS. 1/2" TO 28 TPI, METRIC THREADS.025 TO 14 MMPR, ENGLISH FEEDS. 0.0018 TO 0.1 IPR, CROSS FEEDS. 0.0009 TO 0.05 IPR, SPINDLE HOLE.**9.05" ***, CHUCK. ...more

HOLZMA PROFI HPP 550/38/38 PANEL SAW, MAKE: HOLZMA, TYPE: PROFI HPP 550/38/38, S/N: 0240154343, YR: 2009, Model: Holzma PROFI HPP 550/38/38, Cutting Length: 3,800 mm, Cutting Width: 3,800 mm, Saw Blade Projection: 95 mm, Motor & Power, Main Saw Motor: 13.5 kW (18 HP), Scoring Saw Motor: 2.2 kW, Operating Voltage: ...more

Located at our warehouse in Preston, Idaho., We care about the machines we sell and want all of them to enjoy continued productive and profitable service for our remarkable customers., Included are gathered from various sources such as firsthand inspection, owner or operator interviews, manuals, and OEM research. All ...more

Used Premier Pneumatics ProRate volumetric loader, 2 material design with 25" x 25" main feed hopper and 14" x 20" side screw feed hopper, less screw, with 3.25" x 3.25" bottom outlet.

Capacity (Max. Width x Thickness): 25" x 0,187"Number of Rolls: 5 (2 Over 3)Roll Diameter: 4"Main Motor: 7.5 HP, AC, Powered Driven Pinch Rolls(2) Speed Reducers.

Approx. 10,000 operating hours, Powered by a John Deere diesel engine, Machine remains in daily operation, Main hydraulic cylinder is showing wear and is expected to require replacement in the near future, Complete logger/baler package, Available for inspection while under power, 2012 Aljon 580.

All new parts for the tarp system, Free Wheel Capable, Overall length: 34’ • Rail Length 31’- 3” • Rail Height 61”, Main Winch:60,000lb.Capacity, Free Wheel Capable.

ROUNDO PS-255 10’ x ½” 3 Roll Plate Bending Roll 1988’ #7675, ROUNDO PS-255 10’ x ½” 3 Roll Plate Bending Roll 1988’ #7675, Reference # 7675, Model # PS-255, Serial # 884325, Year of manufacture- 1988, Diameter of top roll- 10”, Diameter of side rolls- ...more

2000 CITIZEN L20VII, Max Machining Dia. 0.79 in, Max Machining Length. 7.87 in, Max Chucking Dia. 8.1 in, Max Drilling Diameter. 0.394 in, Max Tapping Diameter. 0.315 in, Main Spindle Motor. 4.96 hp, Main Spindle Speed. 10000 rpm, Back Spindle Motor. 2.01 hp, Back Spindle Speed. 8000 rpm, ATC. 16, Live Tooling. Yes ...more

-Material: Hot Rolled Steel Q235, -Max. Coil Weight: 30 Ton (66,000 lbs.), -Max. Coil Length: 2000mm (78.74"), -Thickness: 8 - 20mm (0.315" - 0.787"), -Line Direction: Left to Right, Consisting of:, -Coil Car:, Pit Type, -Uncoiler:, -Peeler/Holddown:, -5 Roll Pre-Leveler:, 300mm (11.8") Dia. Rolls, 2 over 3 Rolls, 132 ...more

2024 Altendorf 2024 Model F45 Hand Guard Twin Flex Sliding Table Saw HandGuard – The Highest Level of Safety! Two-Camera Hand Detection System MOTORIZED DUAL-TILTING +/- 46 Degrees Sliding Table Length: 3200 mm (126”) Main Motor: 6.5KW (8.8 HP) Blade Size: 300-400mm with Scorer and 300-550 mm without ...more