Buy or Sell Your Lapping Machines

Manufacturer:SIRCO, Model:PA-24, Condition:Used - Good, Stock #:L3000299, Status:For Sale, Serial #:2676688, Swing 24", Swing Over Cross Slide 16", Centers 120", Spindle Bore 3.5", RPM 2,400 RPM, Power 10 hp, Serial Number 3047, Model PA-24, Swing Over Ways 28", Swing Over Cross Slide 20", Distance Between Centers ...more

T-6124, ONE (1) 10/14 MVA ASEA ELECTRIC LOAD TAP CHANGING SUBSTATION TRANSFORMER, 3 PH, 60 HZ, 8.18% IMPEDANCE, OA/FA, 55 DEG C RISE, COPPER WINDINGS, WINDING TEMP GAUGE, LIQUID TEMP GAUGE, LIQUID LEVEL GAUGE, DRAIN & SAMPLE VALVE, PRESSURE RELEASE, VALVE, NITROGEN LEVEL GAUGE, LV TAP CHANGER, FULL LENGTH, HV ...more

NUMBER OF PLATES. 2, WIDTH OF ANGLE PLATE. 33", LENGTH OF ANGLE PLATE. ", HEIGHT OF ANGLE PLATE. 101", FACE THICKNESS., DRILLED & TAPPED HOLES. 120, SET UP SLOTS. YES, FACE OF PLATE. MACHINED SURFACE.

Kaps-All Model FC8, Stainless steel, 4 staion, 8 spindle capper with number of containers per minute – depending on materials and application. 6" wide x 120" long Delran container conveyor, top mounted 24" diameter rotary cap orientator, adjustable width cap chute set-up for standard flat caps ...more

WIDTH OF PLATE. 18", HEIGHT OF PLATE. 40", LENGTH OF BASE. 23-1/2", FACE THICKNESS. 2", DRILLED & TAPPED HOLES. YES.

BATTERY, HEAVY DUTY, BOX, BLADE/SCARIFIER, BUCKET-MP, 1.3 YD3, PO, Canopy, COUNTERWEIGHT, 198 LBS, COUNTERWEIGHT, 1015 LBS, CUTTING EDGE, TWO PIECE, FAN, STANDARD CAB/ CANOPY, HITCH 3 POINT, HYDRAULICS, MP, 3FCN/5BNK, INSTRUCTIONS ANSI, KIT, DUAL TILT CYLINDER, LANE 3 ORDER, Online Owner's Manual, PACK, DOMESTIC ...more

****ATTACHMENTS PICTURED ARE****, ***BE INCLUDED IN THE PRICING***, **SUBJECT TO CHANGE AND MAY NOT*, AIR CLEANER, STANDARD, ARO, MECHANICAL PITCH, BLADE, 145 IN. ARO LGP, CAB STANDARD PACKAGE, COLD WEATHER, 120V, PACKAGE, COMPLETE STORAGE PROTECTION, COUNTERWEIGHT, REAR, COUNTERWEIGHT, REAR SLAB, D6K2 LGP TRACTOR ...more

STOCK NO. ET-4716, FABRICATED 24” X 96” HIGH T-SLOTTED ANGLE PLATE, Make:, Model:, T-SLOTTED FACE DIMENSIONS: 24″ W X 96″ HIGH X 3-1/4″ THICK, BASE DIMENSIONS: 24″ W X 36″ DEEP X 3-1/2″ THICK, BASE HAS A KEY SLOT, FACE DRILLED AND TAPPED BY 4 HOLES ACROSS X 17 HOLES ...more

SERIAL. R050370, MODEL. 21, SWING OVER WAYS. 21", SWING OVER CROSS SLIDE. 13", SWING IN GAP. 28", LENGTH OF GAP. 16", DISTANCE BETWEEN CENTERS. 60", SPINDLE SPEEDS. 15 TO 1600 RPM, SPINDLE HOLE. 3", ENGLISH THREADS. 1/2 TO 56 TPI, METRIC THREADS. 1/2 TO 28, 4 JAW CHUCK. 18", STEADY REST. 9-1/2", TAPER ATTACHMENT. YES ...more

20” X 60” Engie Lathe with 10 HP Heavy Duty Spindle Motor, 12 Speed Geared Head, Chuck Guard with Micro-Switch to Control Spindle, Inch / Metric Diametral & Modular Threading Capabilities w/o Changing Gears, Automatic Way Lubrications with Filtered Pressure Lubrication System and Flood Coolant System. ...more

Used 6" X 12" Thropp laboratory 2-roll mill. Table mounted including knee and overhead safeties, rotary unions, and manually adjusted roll gap. Has split edge guides, under mounted motor. 440 volt., Thropp 12" x 6".

One Used Shimazu Model Super 2 Twin Spindle Nut Tapper, Serial No 2191, 1990, #4-#10 (3/16") Product Range ( Tap Size), 80-100 Pieces per Minute, 185mm x 25mm R Bent Shank, Hopper, magnetic chip seperator, AC Motor and Controls, Weight 1200 Lbs., Located FOB Bridgeport, CT Warehouse.

921774.018, One (1) used 20" wide Cloeren Sheet Die. Upper integral flexible lip with micro adjustment. Fixed removeable lower lip. Three oblong entrances in back of die. Designed to run three layers. Includes one lower lip. 11 temperature control zones. 240 volt single phase 60 cycle. Job 92 -991, Manufacturer ...more

Stainless steel, 2 station capper rated from 40 to 120 cpm – speeds depending on materials and application. Cap size range of: 10mm – 70mm. a 93"L x 4 1/2"W conveyor, cap hopper, cap sorting disc cap chute and barrier guarding with interlock., OAD: 98"L x 45"W x 93"H.

ANGLE PLATES 19 7/8" x72", SET OF 2, SURFACE AREA OVERALL 19-7/8"" WIDE X 72" HIGH, BASE 19-7/8" WIDE X 31-7/8" "DEEP, HEAVY DUTY ANGLE PLATES, SOME DRILLED & TAPPED HOLES IN FACE FOR MOUNTING WORKPIECE.

18.37"28.75"808.5"10.625"20 - 2000 RPM3"D1-85.62"3.75"#6 MORSE15 HP7,500 LBS.

SERIAL. 50865, MODEL. 330X1000, SWING. 15", CENTER. 40", SWING OVER CROSS. 8", SWING IN GAP. 18", GAP LENGTH. 3.5", DIAMETER OF SPINDLE HOLE. 1.5", SPINDLE RPM. 75 TO 2000 RPM, ENGLISH THREAD.4 TO 5.6 TPI, METRIC THREAD.4 TO 5.6, FEEDS.001 TO.018 IPM, MOTOR. 3 HORSEPOWER, CHUCKS. 7.5" 3 JAW AND 10" 4 JAW.

150 KVA 240 Pri. 380Y/220 Sec., with Taps, Isolation Type, H-30.75", W-30.75", D-27.75", 970 lbs., Aluminum Wound, 150 Degrees C Rise, 220 Degrees C Insulation System, Indoor / Sprinkler Proof Enclosure (Nema 2), 2, -2 @ 2.5% Taps. Terminal Lugs Included (No Charge)., Immediate Shipping From Our Stock!, Call, E-mail ...more

Appleton Eaton CC2 Sure-Lite Black Polycarbonate Double Head Emergency Light - Sure-Lites Emergency Light, Type: Double Head, Wattage: 10.8 W, Voltage Rating: 120/277 VAC, 6 VDC, Lamp Type: (2) 5.4 W Incandescent, Number Of Lamps: 2, Color: Black, Material: Polycarbonate, Amperage Rating: 12 A At 120 V, 0.05 A At 277 ...more

Semi-Automatic Roll On Pilfer Proof (ROPP) Capping System, Model HC-A, manufactured by THC (Taiwan Hon Chuang Enterprise). Handles cap sizes 20-40 mm with bottle heights ranging from 50-180 mm. s adjustable height with capping head rise and fall speed, suitable for ROPP caps. Driven by 1/4 HP, 220/110 Volts, 1720 RPM ...more

Janda P50-18 Press Type Spot Welder 50 KVA x 12" #6437 #1, KVA Rating: 50, Throat Depth: 12", Throat Gap: 8", Input Voltage: 480V, Refrigerant: R134A, Refrigerant Charge: 0.710 KG, Janda 600V Programmable Digital Weld Control, Pneumatic Clamping, MTA Refrigerated Water Chiller.

SERIAL. 3329, MODEL. TELESCOPING COIL LIFTER, CAPACITY. 40,000 LBS, COIL WIDTH. 20" TO 58", PICKING LIPS. 5", LIFTING PIN. 3" DIAMETER, THROAT. 28", WIDTH OF PICKING ARMS. 8", MOTORIZED EXPANSION. YES.

Product, Flex Arm Hydraulic Tapping Arm & TableCapacity in Steel- 1 1/2″, 2 Speed, Hydraulic unit is currently wired 220v 3ph, Comes with (7) Tap Collets, Steel Table is 36″ x 54″ and comes with hold downs., Weight- 970 lbs.

Johnson Controls A70DA-6 Open High Temperature Control, Manual Reset, 100/170 - Johnson Controls A70DA-6 Open High Temperature Control, Manual Reset, 100/170 deg F Range, Locks Out at 140 deg F, 6' Cap Tube, 3/8" x 10" Bulb - Johnson Controls - Johnson Controls - A70DA-6 - A70DA-6.

SKU: 139931, Model: FMK-40, Year: 2010, Condition: Surplus New, Electrical :, Amps: 4000 amps, Dimensions: 43.00 (H) x 10.00 (W) x 102.00 (L) inches, Additional :, Basic Insulation Level: 250 kV, Insulators: standard cap and pin.

Eaton C3000K2A Type MTK, Industrial Control Transformer, Primary Volts 240 x 480 - Eaton C3000K2A type MTK, industrial control transformer, pv: 240 x 480v, 230 x 460v, 220 x 440v, taps: none, sv: 120/115/110v, 115c, 3000 va - Eaton - Eaton - C3000K2A - C3000K2A.

Mounts above a 60" (1500mm) wide or narrower belt (See drawing for ), Up to 12" (300mm) working gap, High-powered, non-deteriorating compact permanent magnet system designed for deep-field extraction. s an alternating pole configuration to concentrate the magnetic field within the working zone while minimizing stray ...more

US INDUSTRIAL GAP BED ENGINE LATHE, MODEL: JIMK530X2500, SERIAL NUMBER: K6129426, Swing Over Bed: 21", Swing In Gap: 28", Length Of Gap: 11.4", Swing Over Cross Slide: 13", Distance Between Centers: 100", Spindle Speeds: (12) 25 - 1500 RPM, Spindle Nose: D1-8, Spindle Hole: 3.14", Tailstock Quill Travel: 6.3" ...more

IC Filling Systems Automatic Isobaric Microblock Model 551 Rinser-Filler-Capper, EPV (Electro Pneumatic Filling Valves) with pre-evacuation of air, suitable for filling beer and carbonated beverages. Includes rinsing station with (5) nozzles, counter pressure filling station with (5) electro pneumatic isobaric valves ...more

Wilson Instruments 8″ Rockwell Hardness Tester, 3 TT BB, Inventory # 9955-C, Model: 3 TT BB, S/N: 730, Vertical Gap: 8″, Horizontal Reach: 5 1/2″, Mechanical :, Dimensions: 17 1/2″ x 11 1/2″ x 27 1/2″ H, Weight: approx. 325 lbs., FOB Our Baltimore, MD Warehouse, Related.

50" LR, 33" FB, 4" THICK, DRILLED AND TAPPED, 4 MOUNTING HOLES 18 ½" CENTERS, HOLES ARE OVAL 2 ½" LONG.

Stainless steel bottling line configured for compact liquid bottles ranging from 25 to 250ml, ideal for applications such as tinctures, essential oils, cosmetics, and health supplements. The line s a twin-head servo-controlled filling system with touchscreen controls and optional heating for viscous products. Cap ...more

Stainless Steel Neck Bander, manufactured by Kalish, type Mini Bandit, model # 5415, serial # 0049, order # 32559. Unit currently set for 84 mm caps. Includes rotary wheel to create two lines of perforations for "easy tear" area. Also includes heat tunnel for shrinking of bands onto bottles/caps. Complete with Mini ...more

Stationary 6,000lb Barber Greene Batch Plant Inventory #: BP2701 Make: Barber Greene Model: BE65 x291 BE BatchPac Plant, Barber Greene Batch Tower, 3 Ton Pugmill 125hp Motor (01-898-300B) Hot Oil Jacketed Paddles Replaced in 2013 45 Ton Hot Bins, SN: A2-898-555B 4 Hot Bins 3 ½ Screen, SN: 860X765 No Bypass ...more

Make: Nordson, Model: H-40 Extrusion Dies, Year: 2002, Machine Location: Illinois, Unused Refurbished Extrusion Dies / Nordson Model H-40 Sheet Die,.58″ Slot Opening., Integral upper flexible lip and fixed lower lip., Adjusting bolts on 1″ centers. 0.040″ flex adjustment., Coat-hanger manifold., Work ...more

Used 60" Wide SRC Systems Ltd Model 480 Duplex Slitter, Shafted unwind with 3" air shaft & 6" adaptors, Web guiding, Razor slitting, Full width lay on rollers at rewind, Differential 3" rewind shafts, Roll removal cart, Footage counter, Manufacturer SRC SYSTEMS LTD. Model 480 DUPLEX Year 1998 Condition Used Stock ...more

Brand/Model: Smith-Meter 8" : Used 8" Smith Meter in-line strainer, 8" Ansi B16.5 600# RF flange, blind flange top cover with lifting lug. 1/2" npt differential pressure taps. RPM.

Gap 18” Spm 60 Motor 7.5 HP Serial 21243 Gauging Rear Capacity 1/4" x 10’ Approx. size 14’2” L x 85”H Pit required NO Approx. weight 16,600 LBS, One Preowned 1/4" x 10' Cincinnati Mechanical Shear Standard s 36” Front Manual Backgauge 10’ Squaring Arm.

300KVA 12470 PRI 208Y/120 SEC 3PH DRY TAPS (2)2.5% A+BN C&C ONLY.

Max Swing Over Bed 1000mm/39.3" Max Swing Over Carriage 650mm/ 25.9" Max Swing Over Gap 1300mm/51.18" Length of Gap 450mm/ 17.7" Maximum Distance between Centers 6000mm/ 236" Main Spindle Bore 104mm/4.09" Spindle Nose A-11 Spindle Speeds 5.6-1120 RPM Main Motor 30KW/ 44 HP Metric Threads (154) 0.4-600 Module Threads ...more

Milltronics ML26/40 CNC Combo LatheCNC Lathe (subject to buyer verification):Swing Over Bed: 27″Swing Over Cross Slide: 16.1″Swing Over Gap: 34.2″Gap Distance: 12.75″Bed Length: 40″Spindle Bore: 4″Spindle Speed: 1,600 RPMSpindle Nose: A1-11X – Axis Travel: 13″Z – ...more

Evergreen, complete monoblock, liquid pressure gravity, yogurt bottle filling, capping and cartoning line rated from 90 to 300 bottles and 20 to 50 wraparound cartons per minute – depending on materials, application and pack pattern. All stainless steel construction. Line consits of: MTC gaylord container ...more