24 Results
2" x 6" Thropp, 2-Roll Mill, w/One Piece Edge Guide, Knee Safeties & Overhead Safeties, 1 HP, 220 V
Perry Videx LLC | Hainesport, NJ
Category: 2 Roll Plastic Rubber Mills
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Thropp
Used 2" X 6" Thropp 2 roll Mill. Serial #2027. 1 HP drive.220 volts one piece edge guide. Knee safeties, overhead safeties., THROPP 2-Roll Mill.
3" x 7" Farrel, high temperature lab mill
DPA Machinery & Appraisals Llc | Ormond Beach, FL
Category: 2 Roll Plastic Rubber Mills
Seller: DPA Machinery & Appraisals Llc
Location: Akron, OH
Mfr: Farrel
Farrel 3" x 3" x 7" 2-roll high temperature lab mill. 700 degree capability. Each roll is chrome plated. Each roll is electrically heated via cal rods with their own temperature controller. Each roll has electric air blowers to cool rolls and maintain set temperatures. Each roll is individually driven via 1-1/2 HP ...more
6" x 12" GF Goodman & Son, 2-Chrome Roll Mill w/Vented Hood, w/Overhead Safety, Split Edge Guide & Adjustable Roll Gap, 440 V
Perry Videx LLC | Hainesport, NJ
Category: 2 Roll Plastic Rubber Mills
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Gf Goodman & Son
Used 12" X 6" GF Goodman & Son 2 chrome roll mill with vented hood. Machine overhead safety, split edge guide, and manually adjustable roll gap. 440 volts, GF GOODMAN & SON 12" X 6".
6" x 12" Schwaberthan #Polymix-110-P, Laboratory 2-Roll Mill, Electric Heated Rolls w/Water Cooling, 13.75" width x 4.5" O.D. Size, 2.6 kW, 277/480 V
Perry Videx LLC | Hainesport, NJ
Category: 2 Roll Plastic Rubber Mills
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Schwaberthan
Used approximately 13.75" wide x 4.5" o.d. Schwaberthan Polymix 110 P laboratory 2-roll mill. Has electric heated rolls with water cooling, maunually adjusted roll spacing. Includes a temperature control panel, roll mounted safty cage, 2.6KW 277/480 volt, 60Hz gear head motor. 22 & 26 teeth on driven side of rolls ...more
6" x 12" Thropp, Laboratory 2-Roll Mill, 6" x 12" Size, Table Mounted, Split Edge Guides, 440 V
Perry Videx LLC | Hainesport, NJ
Category: 2 Roll Plastic Rubber Mills
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Thropp
Used 6" X 12" Thropp laboratory 2-roll mill. Table mounted including knee and overhead safeties, rotary unions, and manually adjusted roll gap. Has split edge guides, under mounted motor. 440 volt., Thropp 12" x 6".
Get email updates for newly added 2 Roll Plastic Rubber Mills
2 Roll Plastic Rubber Mills (also known as two-roll mills) are machines used to mix, blend, and refine plastic or rubber materials by passing them through two rotating rollers. Commonly used in industries like rubber manufacturing, plastics processing, and material development, they are ideal for preparing materials for further processing or testing. These mills are essential for achieving uniformity and consistency in material composition.
6" x 12" Thropp, Laboratory 2-Roll Mill, w/Rotary Unions, Split Edge Guides, Overhead & Knee Safeties, 7.5 HP, 220/440 V
Perry Videx LLC | Hainesport, NJ
Category: 2 Roll Plastic Rubber Mills
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Thropp
Used 6" x 12" Thropp lab 2 roll mill. Serial # T2568. Has rotary unions to each roll, overhead, and knee safeties, manual pedal operated batch off knife, and split edge guides. Chain driven by a 7.5 HP 220/440 volt motor. Manual roll gap adjustment., THROPP 6" x 12".
6" x 13" Bolling, Two Roll Mill, manual adj., on stand
Federal Equipment Company | Cleveland, OH
Category: 2 Roll Plastic Rubber Mills
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Bolling
Used Bolling two roll mill, 6" diameter x 13" roll face, cored rolls with rotary unions, manual roll adjustment, on stand.
6" x 13" TMP, roller bearing lab mill, chromed rolls, 7-1/2 HP, belly bar safeties, cabinet mounted
DPA Machinery & Appraisals Llc | Ormond Beach, FL
Category: 2 Roll Plastic Rubber Mills
Seller: DPA Machinery & Appraisals Llc
Location: Akron, OH
Mfr: Tmp
Like new TMP "Technical Machine Products" 2-roll 6" x 6" x 13" lab mill with chromed rolls. "ROLLER BEARINGS". 7 1/2 hp 460VAC inverter duty gearhead motor, Triple chain drive. Front and rear belly bar safeties. Positive pullback assemblies. Flip up batch guides. Ready to go.
JUST ADDED!
8" x 16" Farrel, Two-Roll Rubber Lab Mill, (2) 10 HP motors, 220/440 Volt
Soberay & Sons Ltd | Cleveland, OH
Category: 2 Roll Plastic Rubber Mills
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Farrel
Item 2021-2 - One (1) Used Farrel Lab Mill, 8 x 16" (200 x 400) rolls, cabinet style, under-slung drive, individual drives, gear driven, flip up guides, (2) 10 HP 220/440 VAC brake motors, variable speed, push button controls, mechanical nip adjustment, OSHA knee safety, cored rolls for heating/cooling rolls.
8" x 16" Reliable, 2-Roll Mill, w/Fume Hood, Split Edge Guides, Overhead Knee & Safety
Perry Videx LLC | Hainesport, NJ
Category: 2 Roll Plastic Rubber Mills
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Reliable
Used Reliable 8" X 16" 2-roll mill. Includes right-angle reducer and chain drive to mill. Has manually adjusted front roll and includes split edge guides and overhead and knee safety. Includes fume hood., RELIABLE 8" X 16".
16" x 36" Bolling, 2-roll silicone mill, AC motor with VFD, direct drive, unitized base
Soberay & Sons Ltd | Cleveland, OH
Category: 2 Roll Plastic Rubber Mills
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Bolling
One (1) Used Bolling 16 x 36 (400 x 915) Silicone Mill, AC motor with VFD, Falk gearbox, direct drive, unitized base, modern ABB drive, pull cord safety on the front and back rolls, manual nip adjustment, nylon guides, scraper blade rear roll, grease lubrication.
16" x 42" Farrel, 2-Roll Rubber Mill, 75 HP @ 705 RPM Reliance motor, Philadelphia gearbox, 35:1 ratio, 480 VAC
Soberay & Sons Ltd | Cleveland, OH
Category: 2 Roll Plastic Rubber Mills
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Farrel
Item 2036 - One (1) Used Farrel 16" x 42" 2-Roll Rubber Mill, Reliance motor 75 HP, 705 RPM, 480 VAC, Philadephia 35:1 gearbox model 228HOP-2, direct drive, connecting gears, unitized base, top cap design, full circle bronze bushings with automatic Trabon lubrication, manual nip adjustment, pneumatic safety brake.
20"/22" x 60" Farrel, Refiner 2-Roll Mill w/Corrugated Roll & Smooth Roll, w/Corrugated & Smooth Rolls, 150 HP, 550 V
Perry Videx LLC | Hainesport, NJ
Category: 2 Roll Plastic Rubber Mills
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Farrel
Used 60" Farrel refiner two roll mill with (1) 20" OD corrugated roll and (1) 22" OD smooth roll. Direct connected to a gearbox and 150HP, 550 volt motor. Includes a Cutler Hammer motor starter, rotary unions to each roll and semi uni drive & unitized construction., FARREL 60".
21" x 36" Kobe, 2-roll rubber mixing mill, 125 HP DC, direct drive, roller bearings, 1980
Soberay & Sons Ltd | Cleveland, OH
Category: 2 Roll Plastic Rubber Mills
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Kobe
Year: 1980
One (1) Used Kobe 21" x 36" (533 x 914) Rubber Mill, MILL BODY ONLY, friction ratio between rolls 1.04:1 via 26/27 tooth connecting gears, roller bearings, no base, year 1980, S/N 790031 & 790032, rubber mixing mill.
22" x 22" x 66" Nippon, 2 roll mill, roller bearing, variable speed, variable friction, rubber or silicone
DPA Machinery & Appraisals Llc | Ormond Beach, FL
Category: 2 Roll Plastic Rubber Mills
Seller: DPA Machinery & Appraisals Llc
Location: Ormond Beach, FL
Mfr: Nippon
1-Nippon 22" x 22" x 66" two roll rubber or silicone mill. Direct connected and unitized on a two piece base. Each roll driven via parallel shaft Hansen reducers with separate 60HP variable speed DC motors and SCR's. 120HP total horsepower. This setup has variable speed and friction up to 24 RPM on either the front or ...more
60" Comerio #MGN-1500E, Two Roll Mill, 150 HP, 22" x 59" rolls, motorized roll adj., base, 2005
HGR24 | Euclid, OH
Category: 2 Roll Plastic Rubber Mills
Seller: HGR24
Location: Euclid, OH
Year: 2005
Inventory No. 0825-057-0003 Name 60" Comerio Two Roll Mill, 150hp Arrival Date 12-16-2025 Dimensions L x W x H (inches) Unavailable Weight (lb.) 1 Category Chemical Processing Condition Used Available Quantity 1 Make Year 2005 Item Used 60" Comerio Ercole Two Roll Mill, model Mgn-1500e, 560mm Roll Diameter(22") X ...more
60" Comerio # MGN-1500E, Two Roll Mill, 150HP, 22" diameter x 59" face, motorized adj, on base, 2005
Federal Equipment Company | Cleveland, OH
Category: 2 Roll Plastic Rubber Mills
Seller: Federal Equipment Company
Location: Cleveland, OH
Year: 2005
Used 60" Comerio Ercole two roll mill, model MGN-1500E, 560mm roll diameter(22") x 1500mm(59") face length rolls, driven by 150 hp motor drive, motorized roll adjustments, end guides, cored rolls with rotary unions, on base, CT# 6369, order# 1R.124N.1, built 2005.
JUST ADDED!
22" x 60" Albert, rolling mill, Allen-Bradley reversing motor starter
Gomaplast Machinery Inc | Wooster, OH
Category: 2 Roll Plastic Rubber Mills
Seller: Gomaplast Machinery Inc
Location: Wooster, OH
Mfr: Albert
Front & rear rolls: 22” dia. x 60” long Cored rolls Direct connected Jones gear reducer, 40.184:1 speed ratio, SN 371258-2, 400 HP (input), 1.526 SF Modern & enclosed 150HP/460V/173A/900RPM AC motor Allen-Bradley reversing motor starter Manual roll gap adjustment Slow-speed chain coupling Stainless ...more
22" x 60" Farrel, 2-roll left hand drive wrap around rubber or plastic mill
DPA Machinery & Appraisals Llc | Ormond Beach, FL
Category: 2 Roll Plastic Rubber Mills
Seller: DPA Machinery & Appraisals Llc
Location: Akron, OH
Mfr: Farrel
Farrel 22x22x60 mill. Left hand drive. Low profile frames. Space saving "wrap around" design.Pneumatic flip up batch guides. 1.2 to 1 friction ratio. Direct connected via Alten 48 to 1 reducer. 200HP GE 1200 rpm AC 460VAC motor. Two piece keyed base. Pneumatic disc brake. Inboard and outboard grease seals. Positive ...more
26" x 26" x 84" Adamson United rubber or plastic mill, 2-roll, 500 HP. drilled rolls, motorized roll adjusters, dual 250 HP drives
DPA Machinery & Appraisals Llc | Ormond Beach, FL
Category: 2 Roll Plastic Rubber Mills
Seller: DPA Machinery & Appraisals Llc
Location: Akron, OH
Mfr: Adamson
1-Adamson 26" x 26" x 84" 500HP 2 - roll plastic/rubber mixing mill. Motorized roll adjusters can be replaced with hydraulic cylinders. Direct connected and unitized on a three piece heavy "I" beam steel base with leveling pads. New in 1988. Both rolls are triple pass "drilled" for heating or cooling and have 17" ...more
26" x 26" x 84" Stewart Bolling 2-roll twin rubber mixing mill, 2-drilled front rolls
DPA Machinery & Appraisals Llc | Ormond Beach, FL
Category: 2 Roll Plastic Rubber Mills
Seller: DPA Machinery & Appraisals Llc
Location: Akron, OH
Mfr: Stewart
Year: 1988
Stewart Bolling 26" x 26" x 84" twin rubber mill. Recently removed from a rubber manufacturing facility that closed in July of 2023. This mill was rebuilt by Stewart Bolling in 2016. Both front rolls are triple pass "drilled" rolls. Rear rolls are cored. Direct connected and unitized on a 4-piece keyed base with ...more
28" x 28" x 100" Farrel, 2-roll roller bearing rubber mixing mill, 100 HP, direct drive
Soberay & Sons Ltd | Cleveland, OH
Category: 2 Roll Plastic Rubber Mills
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Farrel
One (1) Used Farrel 28x28x100" single mill, rubber_mixing_mill, ROLLER BEARING, anti-friction bearing, individual 100 HP AC Vector variable frequency / variable speed drives 1785 RPM with 169:1 reduction ratio gearboxes, roll speed 7 to 73 FPM, direct drive, unitized base, top cap design, motorized nip adjustment, 4" ...more
28" x 100" Bolling, 500 HP hydraulically driven mill with hydraulic roll adjusters and drilled rolls
DPA Machinery & Appraisals Llc | Ormond Beach, FL
Category: 2 Roll Plastic Rubber Mills
Seller: DPA Machinery & Appraisals Llc
Location: Akron, OH
Mfr: Bolling
1-Bolling 28" x 28" x 100" 2 roll rubber mill with front and rear "drilled" rolls. 500HP Haaglunds hydraulic variable speed marathon motor direct connected to drive roll. 500HP AC motor inside hydraulic pump cabinet. Hydraulic roll adjusters. 27/29 tooth connecting gears generating a 1.074 friction ratio. All ...more
JUST ADDED!
40" Remco #DX150, 2-Roll Rubber Mixing Mill, 50 HP
Remco | Grandview, MO
Category: 2 Roll Plastic Rubber Mills
Seller: Remco
Location: Grandview, MO
Mfr: Remco
Year: 2015
40" 2-roll Rubber Mixing Mill (demo unit) available immediately., • Mixing capacity: 40", • Run hours: ~500, • Drive: 50 HP, 460V 3 Phase, • Friction ratio: 1.3, • Weight: ~8,000 lb, • Dimensions: 14 ft x 6 ft x 6 ft, • Heavy-duty rubber processing construction, Notes:, • Starts ...more
