Buy or Sell Your Lapping Machines

SWING OVER BED. 36", SWING OVER CROSSLIDE. 25", SWING IN GAP. 48", LENGTH OF GAP. 24", DISTANCE BETWEEN CENTERS. 150", SPINDLE BORE. 5-1/2", OVERALL LENGTH. 246", SPINDLE SPEEDS. 11 TO 500 RPM, CHUCK. 24" - 4 JAW, THREADING. INCH/METRIC, STEADY REST. YES, 16", FOLLOW REST. YES, 24", MOTOR. 15 HP.

JVT-3894 (T817), ONE (1) UNUSED WAUKESHA 12/16/20 MVA 3 PHASE SUBSTATION TRANSFORMER, 60 HZ, CLASS ONAN/ONAF/ONAF, 9.59% IMPEDANCE, 65 DEG C RISE, COPPER, WINDINGS, LIQUID LEVEL GAUGE, ELECTRONIC TEMP MONITOR, PRESSURE, RELEASE DEVICE, PRESSURE VACUUM BLEEDER, PRESSURE GAUGE, SUDDEN, PRESSURE RELAY, HV: 138000 DELTA ...more

Resina Model F14, automatic, fitment applicator rated from 120 to 300 containers per minute – depending on materials and application. Fitments: 20mm to 38mm in Diameter. Containers: 2-1/2" to 5" in Height 3.5 cu. ft. cap hopper, 22" diameter cap sorting wheel, cap feed chute, container indexing ...more

T-5924:, ONE (1) 4000/5000/5600 KVA ELECTRIC LOAD TAP CHANGING TRANSFORMER, 3 PHASE, 60 HERTZ, CLASS OA/FA, 55/65 DEG. C RISE, 6.02% IMPEDANCE, COPPER WINDINGS, 6 X 1200:5 LV MRCT'S, 3 X 1200:5 HV MRCT'S, DRAIN &, SAMPLE VALVE, LIQUID LEVEL GAUGE, PRESSURE VACUUM GAUGE, FAULT, PRESSURE RELAY, HIGH ...more

SureKap Model SK6000 BF6-70, automatic, inline, stainless steel, 3 station, 6 spindle roll over conveyor capper and cap feeder with number of containers per minute – depending on materials and application Cap size range: 22mm to 70mm. 120" long x 4-1/2" wide stainless steel container conveyor, 21" ...more

Enercon, model LM6101-401, Super Seal 400, compact, air cooled, induction sealer. Rated up to 55 feet per minute with number of products – depending on materials and application. 20" long flat bar sealing head capable of sealing 24mm to 120mm caps with 2.25 Kw output, microprocessor controller has touch pad ...more

TRANSFORMERS THREE PHASE 60 CYCLE, H-43", W-28-1/2", D-23-1/2", 515 lbs., Alum.wound; 150 degrees C rise; 220 degrees C insulation system, Indoor enclosure (Nema I); +2, -4 x 2-1/2% taps, Call or E-mail For Your Cost Today.

Stock Number: ET-5625, (2) 109″ High Angle Plates, Fabricated Construction, Face: 20″ W X 109″ H, Face thickness: 3″, Base Dimension: 20″ W X 61″ D, Face has Drilled and Tapped Holes on grid 4 across by 13 high Estimated Weight: 7000# Each, Location: Wixom, MI.

Used 20" Production Components dual manifold siding die. 2" diameter center back entrance for PVC and side entrance for acrylic.020-.060 gap opening. 3" X 3/8" naked edge. Upper adjustable lip and fixed integral lower lip. Set up for nine (9) heating zones. 240/1/60. Rebuilt by Allied Dies Inc in December 2005. Allied ...more

Kiss Packaging Model 5011-007, semi automatic, inline, 3 station, 6 spindle stainless steel cap tightner with number of containers per minute – depending on materials and application. Maximum cap size of 5- 1/8" (130mm) and (6) adjustable spindles with stainless steel container belt conveyor has 3/4 Hp ...more

10 ft. x 1/4” capblade gap adjustOptions or Upgrades, 39” programmable backgauge.

Fogg, automatic, stainless steel, monoblock system with waterfall style cap sorter / feeder, 36 head rotary pressure gravity filling, 10 head rotary capper and HEPA filtration system. Rated from 50 to 325 containers per minute – depending on materials and application. Waterfall style capp sorter and feeder a ...more

New Restock Tamper Resistant Padmount Transformer includes:, 1) 16' Steel Skid, 2) MegaResister Neutral Ground Resister (Model MR-200) 600V / 347V 5 A Unit, 3) Control Panel 600 Amp, 15 KV 3-Phase, Note: 2,000 kVa Transformer can be sold individually withouth the Skid, Resister and Control Panel., Transformer Type ...more

MRM Elgin / Zalkin, stainless steel, monoblock 12 head filling and 8 head capping system with number of containers per minute – depending on materials, application and machine configuration. 100" long x 3-1/2" wide container belt conveyor with worm screw to star wheel in feed and discharge, MRM Elgin ...more

WIDTH OF PLATE. 43-1/2", HEIGHT OF PLATE. 42", DEPTH OF PLATE. 24", FACE THICKNESS. 2-1/4", NUMBER OF TAPPED HOLES. 323, ROWS OF DRILL & TAPPED HOLES. 17, DIAMETER OF HOLES. 1/2", HOLE CENTER. 2", MACHINE FACE. YES.

Spec Sheet:, Tap Set of 2 6 Flute, Various Sizes, USED, Taps, Set of 2, Sizes Include:, 1 4MT Arbor, 11-1/2 OAL of Entire Piece, Tap Size: 6 Flutes, 1-3/4, Holder OD: 2.50", 1 18mm Straight Shank, 9 OAL of Entire Piece, Tap Size: 6 Flutes, 1-1/2, Holder OD: 2".

T-6125, ONE (1) 10/14 MVA ASEA ELECTRIC LOAD TAP CHANGING SUBSTATION TRANSFORMER, 3 PH, 60 HZ, 8.18% IMPEDANCE, OA/FA, 55 DEG C RISE, COPPER WINDINGS, WINDING TEMP GAUGE, LIQUID TEMP GAUGE, LIQUID LEVEL GAUGE, DRAIN & SAMPLE VALVE, PRESSURE RELEASE, VALVE, NITROGEN LEVEL GAUGE, LV TAP CHANGER, FULL LENGTH, HV ...more

used- inline filling systems liquid bottle filling line. line was set up to run 64oz rectangular bottles and 32 oz square containers with 53mm caps. containers were either front and back or 3 sided wrap on the square bottle. line consists of 45" diameter stainless steel unscrambling table with variable speed drive and ...more

JVT-3858, ONE (1) 24/32/40 MVA ELECTRIC SUBSTATION TRANSFORMER, THREE PHASE, 60 HERTZ, CLASS OA/FA/FOA, IMPEDANCE 7.01%, 65 C RISE, ALUMINUM WINDINGS, TOP-TOP BUSHINGS, WINDING TEMPERATURE GAUGE, DRAIN & SAMPLE VALVE, LIQUID LEVEL GAUGE, LIQUID TEMPERATURE GAUGE, HV: 138000 DELTA BIL: 650 kV, LV: 13800 WYE BIL: ...more

Mauldin Machine Inc., Dealers In New and Used Industrial Machinery, PROPOSAL, We are pleased to offer, subject to prior sale and our “Standard Terms and Conditions of Sales”, for immediate acceptance, the following:, ONE PREOWNED CHAMBERSBURG 1500 POUND CECO-DROP, GRAVITY DROP HAMMER - TWO AVAILABLE, Rated ...more

Virginia Transformer with Load Tap Changing, 39 / 52 / 65 MVA, Primary: 115,000 GrdY/66,395 with standard straddle no load taps, Secondary: 34,500 Grd Y/19,920 @ 1,088 amps, Load Tap Changing - 33 steps ranging from 30,964 thru 38,041 Volts, 3 Phase, 60 Hertz.

Make: Zalkin, Model: TM-3, Year: 2022, Machine Location: Texas, Zalkin TM-3 ROPP Single Head Semi-Automatic Capper, 2022:, Previously used for 16 oz aluminum bottles with 38mm aluminum caps, – One stainless steel sealing head type 100., Adjustable bottle rest for various sizes of containers., – Hand wheel ...more

61' 1/4 Width 77" Length 4 1/2' Thick w/drill & tap holes 3/4.

WIDTH OF PLATE. 18", HEIGHT OF PLATE. 40", LENGTH OF BASE., FACE THICKNESS., DRILLED & TAPPED HOLES. 151.

SKU: 135046, Condition: Used, Dimensions: 80.00 (H) x 105.00 (W) x 105.00 (L) inches, Additional :, With Lip Shroud 187252HX.

Used 6" x 12" Thropp lab 2 roll mill. Serial # T2568. Has rotary unions to each roll, overhead, and knee safeties, manual pedal operated batch off knife, and split edge guides. Chain driven by a 7.5 HP 220/440 volt motor. Manual roll gap adjustment., THROPP 6" x 12".

Fowler Model CARF-E-8/360, Automatic, 8 head, stainless steel, rotary chuck screw capper, rated from 80 to 240 containers per minute – depending on materials and application. Set on 6" centers. Minimum / maximum cap size range: 38mm to 120mm, Minimum / maximum container height range : 4" to 14" ...more

921774.001, One (1) used 22" wide Cloeren Epoch IV manual, 3 Layer flex lip extrusion sheet die. Upper integral flexible lip with micro adjustment. Fixed removeable lower lip. Three oblong entrances located in the back of the die., Set up to run three layers. Includes one lower lip. Eleven temperature zones. 240 vott ...more

Twelve head rotary aluminum capper rated from 120 to 300 vials per minute – speeds depending on materials and application. Cap size range: 13mm to 20mm. Vial size ranges: 1/2" to 2-1/8" in Diameter; 1-1/8" to 6" in Height. a 20" diameter cap feeder, chain belt in feed, star wheel in ...more

SIRCO PA 36 used engine lathe with a 36" swing over bed, 150" between centers, and 5-1/2" spindle bore. Speeds range 11 to 500 RPM. Includes 24" 4-jaw chuck, steady and follow rests, and a 15 HP motor., SWING OVER BED. 36", SWING OVER CROSSLIDE. 25", SWING IN GAP. 48", LENGTH OF GAP. 24", DISTANCE BETWEEN CENTERS. ...more

Bar Capacity 0.79", Max Machining Length 8.27", Max Main Spindle Drilling Diameter 0.39", Max Main Spindle Tapping Diameter 0.31", Max Back Spindle Gripping Diameter 0.79", Max Back Spindle Drilling Diameter 0.39", Max Back Spindle Tapping Diameter 0.31", Max Tool Spindle Drilling Diameter 0.31", Max Tool Spindle ...more

, Manufacturer: Cady, Capacity: 75,000 lbs, Arm Length: 57”, Gap: 30”, Minimum ID: 20” or larger, *Includes rack to keep C-Hook upright for convenient transfer of handling devices.

HAMMOND (USED) MODEL NMK045KD, 45 KVA THREE PHASE TRANSFORMER, HV - 480 MULTI TAP, LV - 240.

Acme 0-24-10 Rocker Arm Type Spot Welder - 10 kVA #7208 #1, KVA Rating: 10, Throat Depth: 24", Throat Gap: 5", Weight: 2,250 lbs., Rocker Arm Type Foot Pedal, Timer, Water Cooled Tips.

Barberan Model Ecoline-1700-H-SI Laminating System Material Capacity: Min Work Piece Length: 1500mm Max Work Piece Width: 1500mm Min/Max Thickness: 3mm/50mm System Layout: LP-ECO-1700 Panel Brush Machine (2) 180mm (Dia.) Brush Heads Powered by 0.75kW Motors EN-R-4-1700 Panel Top & Bottom Glue Spreader (2) 245mm ...more

3/8’’ x 10 ft. cap., 39’’ power backgauge, Adjustable rake angle, Rapid blade gap adjustment.

, FIMS 5A Tool Holder, used. Dimensions: Width 1-3/8, Length 6, Height 3-1/4, Gap 1-1/4. Ideal for tooling accessories. Reliable addition to your workshop setup., Spec Sheet:, FIMS 5A Tool Holder, USED, Brand: FIMS, Part Number: 5A, Tool Holder, Measured Dimensions:, Width: 1-3/8, Length: 6, Height: 3-1/4, Gap: 1-1/4.

WIDTH.: 20", HEIGHT.: 100", DEPTH OF BASE.: 30", DRILLED AND TAPPED HOLES.: YES, Machine Type.Angle Plates Manufacturer.N/A Model.N/A Year.N/A Condition.Not specified.

Make: Gel Cap, Model: Forming Line, Year: 2020, Machine Location: Upon Request, Gel Cap Former & Dryer, Absolute Unit RJWJ-1001| Gel Cap Former (Partially Disassembled) s/n ZJ10018004 on Wheels with Stainless Steel Frame, Siemens Smart Line Touch Screen Control Panel, Overall Dimensions Approx. 58″H x ...more

used- hoosier feeder co. centrifugal feed system, model ft-50. run at 150 ppm. currently set up for 70mm caps. includes elevated conveyor and hopper.

Atlas Xenon Lamp Weathering and Lightfastness, Test Chamber Model SUNSET XXL+, I.D. 29"W x 15.75"D X 13"H, O.D. 37"W X 69"D X 68"H, Has Atlas Programmable Control, 3 Air-cooled Xenon 1700 Watt Lamps, Meets Multiple ISO, ASTM, and ICH industry standards., Its horizontal 3000 cm2 exposure area is ...more

Federal, Model 21-8, Automatic, 21 head rotary, stainless steel, pressure gravity filler and 8 head rotary screw capper rated up to 200 containers per minute – depending on materials and application. star wheel in feed and discharge, 56" OD turrett has (21) filling heads with 1-1/4" OD fill nozzles ...more

One Used 1/2" Nutap Model MAS-14 Double Spindle Nut Tapper, S/N-N/A, 1/4" - 1/2" Tap Size Capacity, 7500 - 15,000 PPH, Electrics: AC Motor & Controls, Weight: 2,500 Lbs., F.O.B. Bridgeport, CT Whse.

Used Agilent autosampler, product# G1811A, 210 sample capacity, with spare lamp, 115 volts, serial# US18000013, built 2018.

JVT-3849, ONE (1) 75 KVA HOWARD COMPARTMENTALIZED PADMOUNT TRANSFORMER, 3 PHASE, 60 HERTZ, CLASS ONAN, 65 DEG. C RISE, 1.9% IMPEDANCE, DEAD FRONT, LOOP FEED, ALUMINUM WINDINGS, LIQUID LEVEL GAUGE, PRESSURE RELIEF, VALVE, DRAIN & SAMPLE VALVE, TEMPERATURE CONTROL GAUGE, DRY WELL, FUSING, MFG. 2015, S/N 34876244515 ...more

used- worldtec model 60-15 rotary monoblock filler and screw capper. capable of speeds up to 360 bpm (depending on fill size and cap diameter). 60 valve unit with arol 15 head rotary chuck capper. last running hot fill protein drinks in plastic and glass containers at 145 deg f. round container sizes: 8.5 oz, 16oz ...more

System includes:, Vacuum Coater, UV Oven with (9) lamps, Lateral Transfer Table, Max width 9", Able to run clear or pigmented coating.