Buy or Sell Your Circular Cold Saw Machine

107858, One (1) used Consani SAI 502 102" Industrial Roll Rewinder, Still in operation producing Hard wound Towel, Jumbo Roll Tissue and Center, Pull Towel, Web Width: 106", Output: 500 MPM (1,640 FPM), Roll Diameter Range:50mm - 350mm (2" - 13.79"), Allen Bradley Logix 5000 Electronics - upgraded in 2016, Log ...more

****ATTACHMENTS PICTURED ARE****, ***BE INCLUDED IN THE PRICING***, **SUBJECT TO CHANGE AND MAY NOT*, *420 07A BACKHOE LOADER CFG2, *AIR CONDITIONER, T4F, *AUTO-UP STABILIZERS, *AUX READY, E-STICK, *CAB, DELUXE, *COLD WEATHER PACKAGE, 120V, *COUNTERWEIGHT, 1015 LBS, *DISPLAY, STANDARD, *ENGINE, 74.5KW, C3.6 DITA, T4F ...more

, Dual post horizontal bandsaw, One piece design – no alignment necessary, 8’ of powered rollers built into the bed of the machine, Cast iron guide arms. The idler side guide arm is mechanically connected to the front vise moveable jaw for proper guide, arm spacing at all times., 20 HP VFD. True direct ...more

, Dual post horizontal bandsaw, One piece design – no alignment necessary, 8’ of powered rollers built into the bed of the machine, Cast iron guide arms. The idler side guide arm is mechanically connected to the front vise moveable jaw for proper guide, arm spacing at all times., 20 HP VFD. True direct ...more

, Dual post horizontal bandsaw, One piece design – no alignment necessary, 8’ of powered rollers built into the bed of the machine, Cast iron guide arms. The idler side guide arm is mechanically connected to the front vise moveable jaw for proper guide, arm spacing at all times., 20 HP VFD. True direct ...more

Online Owner's Manual.

150 AMP ALTERNATOR, 2018 CATERPILLR 140M3 AWD GRADER, ACCUMULATORS, BLADE LIFT, ARTICULATION GUARD, AS IS / AS RECEIVED, BASE + 2 (FL,RIP), BATTERIES, EXTREME DUTY 1400, CAB, PLUS (INTERIOR), CAB, PLUS (STANDARD GLASS), CAMERA, REAR VISION, COLD START; TRANS OIL & BRKE, COLD WEATHER PLUS PACKAGE AWD, CONTROL,AUTO ...more

Edmiston 4 Head Block Circular Sawmill, Good Running Condition, Used Occassionally.

EMMEGI TWIN FERRO MITERING COLD & CARBIDE SAW NEW: 2019, X-AXIS POSITIONING SPEED: 20 M/MIN, BLADE DIAMETER IN HSS: 350 MM, MAXIMUM EXTERNAL INCLINATION: 45 DEG., MAX. MACHINABLE LENGTH: 5,200 MM, MINIMUM CUTTING LENGTH AT 90DEG/45DEG WITH EXTRA SOFTWARE: 3,200 MM, ABILITY TO CUT WITH BLADE AT 45DEG (BY USING ...more

Minimum Cutoff Diameter1/8" (3.0mm) Maximum Cutoff Diameter (Mild Steel)1/2" (12mm) Maximum Cutoff Diameter (High Tensile Steel)3/8" (10mm) Minimum Cutoff Length1-3/16" (30mm) Maximum Cutoff Length5" (130mm) Maximum Shank Length4" (100mm) 1st PKO Stroke1-3/16" (30mm) 2nd PKO Stroke1/2" (12mm) Production Speed60 - 110 ...more

Model RS100 C100N6 - A054F873 | QuietConnect Series | 1800 RPM | 277/480V 3-Phase | Natural Gas/LP, IN STOCK - Ships Fast, Never Lose Business to Power Outages Again, Power outages don't wait for convenient times. When the grid goes down, you need backup power that starts instantly and ...more

WEGOMA WP 4AS Corner Cleaning CNC Machine; CNC 4-axis machine designed for cleaning the weld beads on 90 inner and outer corners of plastic window sections automatically. -- The programmable machine interface and display is controlled by a STURTZ interactive CNC processor.Easy to opearate Teach-In programming and ...more

Armstrong #16 Saw Grinder.

165 Ton Borche Injection Mold Machine, Model BS-150, S/N 1203K112, Year: 2013, - Shot size: 11.3 oz., - Tie bar spacing: 18.11" x 18.11", - Platen size: 26.37" x 26.27", - Daylight: 35.82", - Clamp stroke: 16.14", - Mold thickness: 6.30"/19.69", - KEBA 2580 Controller, - 380 volt transformer for 240-480/3/60, - CE ...more

3" MODERN MODEL 3LD,CUT OFF MACHINE, STOCK# 13389J, MDL# 3LD, S/N# 3LD3390, 2 Slides, 41" Target, STANDARD CATALOG :, 1/4" - 3-1/4" " O.D CAPACITY, LEFT HAND MACHINE, CIRCULATING OIL SYSTEM, EQ WITH, CUT OFF SLIDE, COMBINATION CUT-OFF TOOL HOLDER AND CHAMFERING ATTACHMENT, EASY SET UP, STOCK STOP, 13' MODERN LONG ...more

Make: SPX Marley, Model: NC2121GS, Year: 1996, Machine Location: Ohio, TOWERS: 1, CELLS: 1, YEAR: 1996, STARTUP DATE: 05/31/1996, GPM: 660, TONNAGE: 220, HOT WATER TEMP: 95, COLD WATER TEMP: 85, WET BULB TEMP: 78, LENGTH: 7’-10 ¾”, WIDTH: 15’-6”, HEIGHT: 10’-2 ¼” ...more

420F2 BHL ST, TIER 4, HRC, AIR CONDITIONER, T4, BELT, SEAT, 2" SUSPENSION, CAB, DELUXE, COLD WEATHER PACKAGE, 120V HRC, COUNTERWEIGHT, 1015 LBS, ENGINE, 74.5KW,C4.4 ACERT, T4F, FAN, DELUXE CAB, HYDRAULICS, GP, 6FCN/8BNK, ST, INSTRUCTIONS, ANSI, LANE 2 ORDER, LINES, COMBINED AUX, STD STICK, Online Owner's Manual ...more

GRECON PJ 150/500 and PF 10-610 Finger Jointer and PressFinger jointer and Press system: -- Grecon Finger Joint System Including: Model PJ 150/500 Shaper -- Trim Saw 5 HP -- Shaper Head 30 HP -- Glue Application Head -- Timber Width 40 mm - 150 mm (1.57" - 5.9") -- Timber Thickness 12 mm - 50 mm (.5" - 2") -- Timber ...more

used starview model erb/ph6-1418 (pharma) rotary blister sealer. maximum 14" x 18" seal area. has digital sealing pressue upgrade for medical applications. 1/60/220v, 30 amp unit with plc controls. working temperatures: hot station (plastic to plastic) 250 to 260 deg c, (blister to card) 170 to 180 deg c. cold station ...more

Armstrong #90 Equalizer Band Saw Grinder, 3ph, Good Condition.

5 LB FIRE EXTINGUISHER, BATTERY,EXTRA HEAVY DUTY, DISC, BUCKET-GP, 74", BOCE, CAB PACKAGE, ULTRA, CERTIFICATION ARR, P65, COUNTERWEIGHT,MACHINE,EXTERNAL, DOOR, CAB, POLYCARBONATE, FILM, RIDE CONTROL, ANSI, FILM, SELF LEVEL, ANSI, HEATER, ENGINE COOLANT, 120V, INSTRUCTIONS, ANSI, USA, LANE 2 ORDER, MOUNTING, FIRE ...more

MAKE: FMB, MDL: TITAN, S/N: Y00788, YR: 2017, BLADE SIZE: 3300 X 27 X 0,9MM, SPEED: 35 A 70 M/MIN, TABLE HEIGHT: 37", MACHINE DIMS:35"LR, X 71"W, X 63"H, MACHINE WEIGHT: 1075 LBS, LOCATION: DALLAS, TEXAS 75241, PRICE: $10,500.00, **PURCHASED FROM AN INSURANCE COMPANY CLAIM., **** SHOWN ARE TO BE USED, AS A GUIDELINE ...more

88 Ton Nissei All Electric Injection Mold Machine, Model NEX1000-5E, S/N N/A, Year: 2005, - Shot size: 1.13 oz., - Tie bar spacing: 15.1" x 15.1", - Platen size: 21.4" x 21.4", - Daylight: 15.1"/26.9", - Clamp stroke: 11.8", - Mold thickness: 7.87"/15.1", - TACT Control, - 230/3/60, Very low hours - approx. 12,933 ...more

CONDITION AND HOURS SUBJECT TO CHANGE, PLEASE CALL FOR MACHINE LOCATION.

BEACON, LIGHTING, Online Owner's Manual, ROTOR, 2.2M/88".

130 Ton Autojector Vertical Rotary Injection Mold Machine, Model WDTHC130-4 Special, S/N AJ002620-0300, Year: 2000, - Shot size: 9.93 oz., - Platen size: 16" x 36", - Stroke: 10", - Daylight: 27", - Mold height: 18" min., - Rotary table size: 77" dia., - Centerline: adjustable parting line, - 2 Sta. Rotary Table, - ...more

Pre-owned 1999 RAS M0 74.30 Folding Machine, Working Width 126", Maximum Sheet Thickness 9 Gauge, Max. Length of Forming: 126″, Min. Flange Height: 6 x Gauge Clamping Beam Max., Speed Up: 3.60″/sec Clamping Beam Max., Speed Down: 1.57″/sec Max., Folding Speed: 74″/sec, Folding Angle Setting ...more

1-USED FRONIUS 21" X 60" CENTERS X 150 KG TRUNION STYLE WELDING CELL DATE OF MFG. 2011 STK# 103650==================================================================== WHILE OBTAINED FROM SOURCES DEEMED RELIABLE ARE SUBJECT CHANGE WITHOUT NOTICE AND TO VERIFICATION BY BUYER: UNIT IS A CELL BUILT BY FRONIUS :FABRICATED ...more

;- FOLEY WORK READY - SHOWN ATTACHMENTS SUBJECT TO CHANGE AND MAY NOT BE INCLUDED IN FINAL PRICE, 2023 MODEL, AID, COLD WEATHER STARTING, AM/FM RADIO (BLUETOOTH READY), ANTIFREEZE, -36C (-33F), BODY, STANDARD, CAB, STANDARD, CHASSIS, STANDARD, EXHAUST, HEATED BODY, FENDER COVER, FILM GROUP, ANSI, GROUP, ETHER ...more

, 6° canted head, Split front vise. Can be replaced, by request w/retractable datum vise at no charge., Shuttle s automatic multi-indexing up to 32” in a single stroke w/automatic kerf compensation. Powered by a rack, and pinion servo drive., Steel guide arms. The idler side guide arm is mechanically ...more

Ineco Hydraulic Tapping Machine, Very good/ like new condition, Hydraulic tapping spindle, parallel and slanted tapping arms, table mounting column, electric motor, hydraulic pump, hydraulic box, cast iron work cart (with a t-slot surface) and electric controlled device., Power supply required: 20A / 480V/ 3 phase. ...more

18” X 18” Programmable Dual Column Bandsaw with Omron CNC Control, Built-In Diagnostics, Variable Vise Pressure, Coolant System with Wash Down Hose, Chip Conveyor, Service Tool Kit and All Manuals., Height Capacity: 18”, Width Capacity: 18”, Drive Motor: 10 HP, Machine Weight: 7,500 Lbs ...more

* ALARM PKG: FLASHING BEACON, * COLD WEATHER PKG: 5W40 SYN OIL, 5-5-5 FULL MACHINE WARRANTY, 5-YEAR ELECTRICAL/HYDRAULIC/BASE, 8 FT STEEL PLATFORM, 8'1"H X 26'L X 7'W - STOWED, AIR-FILLED ROUGH TERRAIN TIRES, DESCENT ALARM, & TRAVEL ALARM, DEUTZ D2011L03I 3-CYLINDER 48HP, ENGINE S/N 11627682, FREIGHT ...more

;- Foley Work Ready - ATTACHMENTS SHOWN SUBJECT TO CHANGE AND MAY NOT BE INCLUDED IN PRICE, 2023 MODEL, 3V IMPLEMENT LINES (QC), AIR INLET PRECLEANER, STRATA, ANTIFREEZE, -34C (-29F), AXLES, OPEN/OPEN, COLD WEATHER PACKAGE (120V), COUNTERWEIGHT, STD, 605KG, FAN, REVERSING, ANSI, FENDER, STANDARD, BASIC, FRAME ...more

Cummins RS 150 Quiet Connect Series Liquid Cooled Residential Standby Generator, Robust product design and testing -, The generator is designed to operate under extreme environmental conditions including cold weather starts at as low as -40 F., Series Model Available:, 1 Phase 120/240v, 3 Phase 120/240v, 3 Phase ...more

Powdered Metal Laboratory EquipmentMODEL Various, Great selection of Laboratory Equipment including Mitral CMM, Detroit Tester, Riehle Tester, Rockwell Tester, Buehler Cut-Off Saw, Optical Comparator, Carbon Determinator, Polishing Machine, etc., STOCK NUMBER: DPM-MetLab.

MEP / Wilton Cobra 350 AX Cold Saw, 14” Blade, Serial # 00509/24G, Asset # 15028, Blade Size 350 x 32 x 2.5 mm, Maximum Blade Size 14”, Max. Vise Opening 7 7/16”, Blade Speeds 15/30/45/90 RPM, Cutting Capacity at 90 Degrees, Round 4 11/16”, Square 3 15/16”, Rectangle 7” x 3 ...more

The DoALL 2618 Band Mill is built to cut large blocks of materials into 4 to, 10 foot lengths. This Band Mill s a movable support table that supports, materials on both sides of the blade. It also provides more blade rigidity, than that of a regular plate saw., New - 2013, Cutting Capacity.26" x 18", Band Saw ...more

Less than 200 Hours| Clamping Force: 770 Ton (700 Metric Tons)| Clamp Style: Two-Platen (TP) Servo Hydraulic, The 2024 Chen Hsong SM700-TP-SVP/2 (D2) 770 Ton Injection Molder is built for high-tonnage, precision plastic molding of large, deep-cavity parts. Ideal for automotive components such as bumpers, dashboards ...more

Round Cutting Capacity  90°: 12.6"60° Left: 12.6"60° Right: 12.6"75° Left: 12.6"75° Right: 12.6"45° Left: 12.6"45° Right: 12.6"30° Left: 7.8"Minimum: 0.78"Rectangle Cutting Capacity  90°: 20.4" x 12.6"75° Left: 20.4" x 12.6"75° Right: 19.2" x 12.6"60° Left: 18.5" ...more

EquipmentStructural Steel Processing LinesBeam Drill / Saw Lines2019 Peddinghaus PCD 1100/3C ATC & 1250 DG Beam Drill Line with Material Handling2019 Peddinghaus PCD 1100/3C ATC & 1250 DG Beam Drill Line with Material HandlingHave one to sell?Sell Now1 (714) 253-4707used@jpsint.comConditionUsedQuantity1 ...more

5 LB FIRE EXTINGUISHER, BATTERY,EXTRA HEAVY DUTY, DISC, BUCKET-GP, 86", BOCE, CAB PACKAGE, ULTRA, CARRIAGE, PAL C2, 46", SSL, CERTIFICATION ARR, P65, COUNTERWEIGHT,MACHINE,EXTERNAL, DEBRIS MGMT PKG, NONE (DM0), DOOR, CAB, POLYCARBONATE, FILM, RIDE CONTROL, ANSI, FILM, SELF LEVEL, ANSI, FORK, PAL C2, 48" X 4" X 1.6" ...more

This mill is ready to be removed from the current location., - 4 Roll Cases 24″ 2 center 6.5 Diameter 45′ 56′ 62′ 70′HMC All motor controls included, - 7 Lumber Decks Flat Chains 10′ 12′ 16′ 20′ 24′ 40′ 82′ 5 Chains WIDC All motor controls ...more