Buy or Sell Your C18 Engines
AI-ranked results for c18 - closest matches first
500 KW Caterpillar #C15, diesel generator set, 277/480 Volts, 762 HP @ 1800 RPM., EPA Tier 2, sound attenuated enclosure, 875 gal. sub-base fuel tank, 2023, new
Central States Diesel Generators LLC | Waukesha, WI
Category: Diesel Generators
Seller: Central States Diesel Generators LLC
Location: Waukesha, WI
Mfr: Caterpillar
Model: C15
Year: 2023
New Caterpillar 500 kW standby (455 kW prime) diesel generator set, SN-RK500414. CAT C15 engine rated 762 HP at 1800 RPM, SN-FTE05894, EPA Tier 2 emissions. 3/60/277/480V. 800 Amp main-line circuit breaker. UL2200 listed package. Engine cooling radiator rated 50C/122F ambient. GCCP1.2 digital control panel. EnerGenius ...more
JUST ADDED!
500 KW Caterpillar #C15, mobile diesel generator set, 480 Volts, 3118 hours, 1800 RPM, Tier 2, sound attenuated enclosure, 2022 Reman.
Ring Power Systems | Saint Augustine, FL
Category: Diesel Generators
Seller: Ring Power Systems
Location: Saint Augustine, FL
Mfr: Caterpillar
Model: C15
Year: 2007
Sound Attenuated, Mobile CATERPILLAR Diesel Generator Set, Packaged in 2022 with New 20’ Sound Attenuated Container, Rebuilt C15 Tier 2 Emissions, CAT EMCP 3.1 Premium Generator Control Panel, Auto start / Stop Capability, Engine Safety Shutdowns, Reconditioned CAT Generator Cleaned-Dipped-Baked, Circuit ...more
500 KW Caterpillar #C15, open skid mount, 480 Volts, New, 2024
NineX Power Systems | Spring, TX
Category: Diesel Generators
Seller: NineX Power Systems
Location: Waukesha, WI
Mfr: Caterpillar
Model: C15
Year: 2024
New CAT C15 Generator Set; 2024 Model – Full CAT Warranty; 500kW Standby Rated; 480/277V; Open Skid Mounted; Digital Controller; 800A Breaker; In Stock – Immediately Available to Ship., Generator Set: Manufacturer : Caterpillar Package Model : D500GC Package S/N : RK500535 Control Panel : Digital Circuit ...more
500 KW Caterpillar #C15, diesel generator set, 480 Volts, 1800 RPM, 99 hours, EPA Tier 2, sound attenuated enclosure, 2900 gal. sub-base fuel tank, 2019
MacAllister Power Systems | Indianapolis, IN
Category: Diesel Generators
Seller: MacAllister Power Systems
Location: Indianapolis, IN
Mfr: Caterpillar
Model: C15
Year: 2019
Check out this used 2019 Caterpillar C15 for sale. See, pictures and prices. Contact us today to learn more!.
JUST ADDED!
500 KW Caterpillar #C15, Diesel Generator, 600 Volts, 600 amp main breaker, GCCP 1.2 controller, 2024
Savona Equipment | Savona, BC
Category: Diesel Generators
Seller: Savona Equipment
Location: Savona, BC
Mfr: Caterpillar
Model: C15
Year: 2024
500kW CAT C15 Diesel Generator, Make: CaterpillarModel: C15Type: Diesel GeneratorYear: 2024Condition: New ConditionFuel: Diesel Fuel Tank: 24-Hour ULCS601 Fuel TankPortable/Stationary: StationaryEnclosure: Sound Attenuated Enclosure - Level 2 (73dBA)Engine: CAT C15 Diesel Engine - EPA Tier 2, Generator: kW: ...more
580 KW Caterpillar #C-15, diesel generator set, 480 Volts, 787 BHP @ 1800 RPM
LarMar Industries Inc. | Midland, TX
Category: Diesel Generators
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Caterpillar
Model: C-15
580KW Standby/ 540KW Prime Powered by CAT C-15 ACERT; 787bhp; AR#: 296-2943; spec#: 0K-9349; SPECIAL HIGH HP- Level 9 Overhaul; unused 660KW 1800rpm; SAE#1;Marelli Generator; 1800rpm; model MJB 355 MA4 SAE 1/14 (660 KW@80*)756KW@105*, 12 WIRE 992 AMPS @480V, Breaker, Control Panel, CAT Rad with Blow fan – new ...more
536 HP Caterpillar #C15, diesel engine, AR.NO.3521076, 2000 RPM, never used
Hongkong Jingrun Electromechanical Co | Shanghai, China
Category: Diesel Engines
Seller: Hongkong Jingrun Electromechanical Co
Location: Shanghai, China
Mfr: Caterpillar
Model: C15
Year: 2020
Surplus-Unused.
Caterpillar C-15, Complete Diesel Engine, Rebuilt
Diesel Sales | Chicago, IL
Category: Diesel Engines
Seller: Diesel Sales
Location: Chicago, IL
Mfr: Caterpillar
Model: C-15
Off Road Lhx, Jre, Bem & Others Starting At $44,995.00 For Egr Engines Add $10,000, Premium Remanufactured Caterpillar C-15 Complete Engine Exchange With One Year Or 2,000 Hrs. Whichever Occurs First, Limited Parts & Labor Warranty. Plus $15,000 Refundable Core Deposit, Pricing May Vary Depending On The ...more
Caterpillar #C15, engine
Industrial Diesel Inc | Decatur, TX
Category: Diesel Engines
Seller: Industrial Diesel Inc
Location: Decatur, TX
Model: C15
CategoryEngineManufacturerCATERPILLARModelC15Serial NumberLHX18724ConditionCorec15 good core 980h [Available Now].
Caterpillar C-15, Long Block Diesel Truck Engine, Rebuilt
Diesel Sales | Chicago, IL
Category: Truck Engines
Seller: Diesel Sales
Location: Chicago, IL
Mfr: Caterpillar
Model: C-15
6nz, Mbn, Spd, Msx, Any C-15 Basic Long Block Remanufactured Engines Starting At $16,095.00 Exchange With One Year Or 2,000 Hrs Whichever Occurs First, Factory Parts & Labor Warranty Plus $6750.00 Refundable Core Deposit. Freight Included In Price, Us48. Add Abs#12139 Warranty.
Citizen #A20-VI-PL, swiss lathe, 0.812" bar stock, .79" diameter, 6.49" length, Fanuc, Edge Technologies C-320 bar loader, 2007
Machine Tool Bids | Chicago, IL
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Citizen
Model: A20-VI-PL
Year: 2007
Citizen A20 VI PL Swiss Lathe (2007), Main Spindle: Bar stock max. 0.812” (Spindle Sleeve ID is 0.840”), Sub Spindle: Max. 0.790” (Spindle Sleeve ID is 0.800”), Rotary: Max. 1.25”, Maximum Turning Diameter: 20 mm (.787”), Maximum Turning Length: 165 mm (6.49”), Maximum Capture ...more
540 HP Caterpillar #C15, Tier 3, 2100 RPM, 6919 hours, 2008
NineX Power Systems | Spring, TX
Category: Diesel Engines
Seller: NineX Power Systems
Location: Houston, TX
Mfr: Caterpillar
Model: C15
Year: 2008
Used CAT C15 Industrial Engine; 2008 Model – 6919 Original Hours; Tier 3 Emissions; 540HP @ 2100RPM; SAE 1 Flywheel Housing; Electric Starter; Charging Alternator; Heavy Duty Air Cleaner; Engine Driven Radiator; Exhaust Muffler; Instrument Panel; In Stock – Unit to be Cleaned, Serviced & Painted ...more
500 KW Caterpillar #C15, diesel generator, standby, 277/480 Volts, 2024
Powersafe Energy Services | Surrey, BC
Category: Diesel Generators
Seller: Powersafe Energy Services
Location: Surrey, BC
Mfr: Caterpillar
Model: C15
Year: 2024
Hours: 0 Condition: Rebuilt Make: CAT Model: C15 kW: 500 Rating: Standby Voltage: 277-480V Fuel: Diesel Make Year: 2024 CAT Model C15, Refurbished/ Rebuilt 2024, Original YOM 2006, Hours 0 from Overhaul ,C15-Tier-2, 500kW 480V, EMCP 3.1, Generator End Cleaned, Baked, and Dipped – Radiator Removed, Cleaned, and ...more
500 kW Caterpillar #C15, Diesel Generator, stationary, 3 phase, 480 Volts, 24hr fuel tank, sound attenuated enclosure
LEL Critical Equipment | Spartanburg, SC
Category: Diesel Generators
Seller: LEL Critical Equipment
Location: Spartanburg, SC
Mfr: Caterpillar
Model: C15
500 kW CAT C15 Diesel Generator This 500 kW CAT C15 diesel generator is a reliable power solution engineered for demanding industrial and commercial environments. Housed in a sound-attenuated enclosure, it operates with reduced noise, making it suitable for locations where both performance and quiet operation are ...more
325 Ton, Standard #AB325-16, hydraulic, 173" between housing, 16' overall, 30 HP, 8" stroke, NEW
Smith Machinery Co | Ames, IA
Category: Hydraulic Press Brakes
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Standard
Model: AB325-16
TONNAGE FORMING/PUNCHING ----------------- 325/230, DISTANCE BETWEEN HOUSINGS ---------------- 14 ft5 in, BED/RAM OVERALL LENGTH ------------------- 16 ft, BELOW GRADE ------------------------------ NO, WEIGHT ----------------------------------- 66,000 LBS., BED HEIGHT ------------------------------- 38 in, BED WIDTH ...more
14 gauge x 10' GMC #SB-1014, sheet metal bending brake, new
Wheeler Machinery Sales | Pomona, CA
Category: Sheet Metal Box and Pan Brakes
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Gmc
Model: SB-1014
- ISO 9002 certified, - Large 3 beam opening, adjustable, - 1 beam adjustment (front and back), - Stop rods for repeat bends, - (2) counter weights, - All steel heavy body construction with extra heavy tie rod for minimum deflection, - One year warranty for parts, Bending Capacity: Mild Steel, 14 Ga.Bending Capacity: ...more
420 HP Caterpillar #C11, engine, 2100 RPM, Tier 2
Industrial Diesel Inc | Decatur, TX
Category: Diesel Engines
Seller: Industrial Diesel Inc
Location: Decatur, TX
Mfr: Caterpillar
Model: C11
CategoryEngineManufacturerCATERPILLARModelC11Serial NumberHRA01309ConditionUsedUsed Caterpillar C11 engine rated at 420 horsepower at 2100 RPM. Arrangement number of 236-4575. Tier 2 with 13660 hours. [available now]Providing reliable power for applications requiring 242-336 bkW (325-450 bhp), Cat® C11 Industrial ...more
450 HP Caterpillar #C-13, Diesel Truck Engine, warranty, AS-IS
Diesel Sales | Chicago, IL
Category: Diesel Engines
Seller: Diesel Sales
Location: Chicago, IL
Mfr: Caterpillar
Model: C-13
Good Tested Truck Engine Exchange With 100 Day Parts Warranty Plus $2,000.00 Refundable Core Deposit. Sn# Kcb94217, 372-8229, 450 Hp. See Tag#1018r For Reman Price Includes Shipping Us 48, Alternator & Starter Not Included. Subject To Hp, Miles, Ar-Type, Egr And Dpf. Starting At $14,995.00.
Buss SMS-Canzler #Lube Oil Recovery Plant, Thin-Film Evaporation System, Stainless Steel, 3300 lbs/hr, (2) Condensers & Process Columns
Aaron Equipment Co | Schaumburg, IL
Category: Oil Recovery Systems
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Model: LUBE
used- buss sms-canzler lube oil recovery plant with a nominal/design capacity of 3300 lbs./hr. (1500 kg./hr.) feed consisting of: (2) buss sms-canzler thin-film-evaporators, type dvn0400. stainless steel, 1st evaporation stage: approx. 1.015-1.305 lbs./sq. inch (70-90 mbar at 518 deg f. (270 deg c.), and for 2nd ...more
No. 3A Warner & Swasey, M3500, cross sliding turret lathe
Yoder Brothers Machinery | Toledo, OH
Category: Saddle Turret Lathes
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Warner & Swasey
Model: 3A
Dimensions180" x 84" x 70" high Weight16200 pounds, SERIAL. 2182868 MODEL. 3A (M-3500) SQUARE HEAD SWING OVER BED. 24-1/2" SWING OVER CARRIAGE HORN. 18" SPINDLE NOSE TO TURRET. 58-3/4" SPINDLE HOLE. 6-1/8" SPINDLE SPEEDS. (32) 18 TO 639 RPM CHUCK. 21" 3 JAW, POWER CHUCK WRENCH. YES CARRIAGE LONGITUDINAL FEEDS. ...more
16" x 32" Acer #AGS-1632HD, surface grinder, 14" x5" x2" wheel, automatic lube system, 1993, #68676
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Acer
Model: AGS-1632HD
Year: 1993
SERIAL. 9321014, MODEL. AGS1632AHD, YEAR NEW. 1993, CHUCK SIZE. 15-3/4 x 31-1/2", HEIGHT UNDER NEW WHEEL (OVER TABLE). 18", CHUCK THICKNESS. 3", LONGITUDINAL TABLE TRAVEL. 33", CROSS TRAVEL. 17-3/4", HYDRAULIC TABLE TRAVEL. 16 TO 80 FPM, INCREMENTAL DOWNFEED RATES (6).001"PER REVOLUTION, POWER SPINDLE ELEVATIONS. YES ...more
JUST ADDED!
Daewoo Doosan #Puma-DNT-2600M, CNC universal turning center w/ milling, 25.6" swing, 10" chuck, 3-jaw, 3.2" bar, 27" centers, 16.1" dia., 25.9" lgth, A2-8, 12 turret, Fanuc I, 2023
Used CNC LLC | Huntley, IL
Category: CNC Lathes and Turning Centers
Seller: Used CNC LLC
Location: Huntley, IL
Mfr: Daewoo Doosan
Model: PUMA-DNT-2600M
Year: 2023
DOOSAN PUMA DNT 2600M available, a 2023 model CNC universal turning and milling center. This used 2-axis and 3-axis lathe from renowned manufacturer DOOSAN is ideal for precise and efficient machining tasks., 2023 DOOSAN DNT 2600M, Swing Over Bed. 25.6", Machining Length. 25.9", Distance Between Centers. 27", Turning ...more
5 HP 1750/2300 RPM Reliance, Frame C1811ATCZ, DPFV, Stab Shunt, 240 VA, 240 VF
HECO Inc. | Kalamazoo, MI
Category: DC Motors Electrical, 230-250 Volts
Seller: HECO Inc.
Location: Kalamazoo, MI
Mfr: Reliance
Frame: C1811ATC
MK Manufacturing #MKM-CD-210, Rotary Disk Atomizer, same as #F-35, Stainless Steel 316, Spray Disk, 19k RPM, w/ sensors, Insulated Jacket, new, AS IS
Aaron Equipment Co | Schaumburg, IL
Category: Spray Dryers
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Mk Manufacturing
Model: MKM-CD-210
new mkm cd-210 rotary disk atomizer ss316, 19,000 rpm, f-35 compatible, includes toolkit. constructed of 316 stainless steel. the atomizer s key components in ss 316 stainless steel, including the feeder cover, retainer, sleeve, feeding pipe, and spray disk (?210 mm), all precision-machined and dynamically balanced at ...more
Tsugami #BU-26SY, CNC swiss gang slide/turret lathe, 1" capacity, 8-Axis, Fanuc 18iTB2, LNS Hydrobar Express 332 Bar Loader, 2006
Machinery Central | Louisville, KY
Seller: Machinery Central
Location: Dayton, OH
Mfr: Tsugami
Model: BU-26SY
Year: 2006
Spec Sheet:, 2006 Tsugami BU-26SY CNC Swiss Gang Slide/Turret Lathe w/LNS Express Bar Feed, Overview, Type:[Swiss Screw Machines (CNC)](https://automatics.com/types/9535-swiss-screw-machines-cnc), Manufacturer:[Tsugami](https://automatics.com/brands/tsugami), Model:BU26SY, Year:2006, 2006 Tsugami BU-26SY CNC Swiss ...more
Magplastic #SSB-02 PET Bottle Blow Moulding Machine, 2009
Revelation Machinery | Chicago, IL
Category: Plastic Blow Molders
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Magplastic
Model: SSB-02
Year: 2009
Make: Magplastic, Model: SSB 02, Year: 2009, Machine Location: Minnesota, Magplastic SSB02 PET Bottle Blow Moulding Machine, 2009, – Previously used for 1.75L, 1L, and.75L PET bottles, – System includes tote dumper, pre-form conveyor, and bottle blower, Machine technical data:, – Press closing force: ...more
Deckel #DMU-80P-duoBLOCK, 5-Axis CNC Universal Machining Center, 31.5" X, Y, Z, 25 HP, 18000 RPM, 40-Station automatic tool changer, 2009
MachineStation | Lake Elsinore, CA
Category: Vertical CNC Machining Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Deckel
Model: DMU-80P-DUOBLOCK
Year: 2009
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Heidenhain ERGOline iTNC 530 CNC Control, 21,332 ...more
165 Ton, Aida #C1-15 (2), OBI punch press, 7.8" stroke, 3.3" slide adj., 15.7" Shut Height, 48.8" x 24.8" bed, 45 SPM, air clutch, #13928T
Timco Inc | Columbia, TN
Category: Gap Frame Single Crank Press Machines
Seller: Timco Inc
Location: Columbia, TN
Mfr: Aida
Model: C1-15
AIDA 165 TON OBI PUNCH PRESS, STOCK# 13928T, MODEL C1-15(2), STROKE 7.8, SLIDE ADJ 3.3, SHUT HEIGHT 15.7", AREA OF BED 48.8"LR X 24.8"FB, BOLSTER THICKNESS 3.5, AREA OF SLIDE 26.3"LR X 19.6"FB, OPENING THRU BACK 26.5", FLOOR TO TOP OF BED 35.5", SPM APPROX 45, AIR CLUTCH & BRAKE, AIR COUNTERBALANCES, BACK GEARED ...more
20" x 80" Longem #LG-2080DS, gap bed engine lathe, 11" SOCS, 4-jaw 16" chuck, digital read out, 10 HP
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Longem
Model: LG-2080DS
SERIAL. 120757, MODEL. LG-2080DS, SWING OVER WAYS. 20", SWING OVER CROSS SLIDE. 11", SWING IN GAP. 28", DISTANCE BETWEEN CENTERS. 80", SPINDLE SPEEDS. (24) 18 TO 1600 RPM, DIAMETER OF SPINDLE HOLE. 3-1/8", RAPID TRAVERSE. 4 WAY, LONGITUDINAL FEEDS. 0.0011 TO.064 IPR, THREADS METRIC. 0.5 TO 96 MM, 4-JAW CHUCK. 16", 2 ...more
Norland International #GlassPak66, Bottling Line, 18-Head Bottle Filler, used for 16 oz @ 70 BPM, 16.9 oz max Can Size, 52" x 60" Can Table, 5 RPM, 2020
Revelation Machinery | Chicago, IL
Category: Bottling Equipment
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: International
Model: GLASSPAK66
Year: 2020
Make: Norland International, Model: GlassPak66, Year: 2020, Machine Location: Upon Request, Norland International Complete line with (2) GlassPak66 Monoblock Systems (16oz and 25 Oz) for Glass or Aluminum with Fluid Solutions 3 Head ROPP Capper, 2020:, This line was previously used for filling and capping 16 oz and 25 ...more
JUST ADDED!
Fanuc A06B-0273-B500#0100 AC Servo Motor
MRO Exchange | Fairfield, IL
Category: AC Servo Motors
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fanuc
Frame: 0100
The Fanuc A06B-0273-B500#0100 is a sealed AC servo motor from the alpha i series, model designation aiS 40/4000HV. Rated at 5.5 kW continuous output with a stall torque of 40 Nm and a stall current of 18 A, this unit is configured for high voltage 400-480V three phase input at 50/60 Hz, drawing 7.9 A at 200 Hz. ...more
Nanxing #MFB60CY, Precision Edgebanding Machine, 15-65 mm width x 0.4-3 mm Edge Size, 10-60 mm Panel thickness, 80 mm width x 360 mm L min. Panel Size, 2016
Revelation Machinery | Chicago, IL
Category: Woodworking Edgebanders
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Nanxing
Model: MFB60CY
Year: 2016
Make: Nanxing, Model: MFB60CY, Year: 2016, Machine Location: Alabama, Panel Thickness: 10-60mm, Panel Width (Minimum): 80mm, Panel Length (Minimum): 360mm, Edge Width: 15-65mm, Edge Thickness: 0.4-3, Feed Speed: 9-18 m/min, Pneumatic Power: 0.7MPa, Installed Power: 12.18 kW, Net Weight: 1750kg, Overall Dimensions: ...more
440 HP Caterpillar #C13, Industrial Power Unit (Core), 32k Hours, Tier 3, 2006
NineX Power Systems | Spring, TX
Category: Industrial Power Units
Seller: NineX Power Systems
Location: Houston, TX
Mfr: Caterpillar
Model: C13
Year: 2006
Used CAT C13 Industrial Power Unit; 2006 Model – 36,566 Hours; 415HP @ 2100RPM; Tier 3 Emissions; Engine Driven Radiator; SAE 1 Flywheel Housing; Electric Starter; Charging Alternator; Front Facing Exhaust; CAT Control Panel, Engine: Manufacturer : Caterpillar Model : C13 Serial Number : LGK04480 Arrangement/CPL ...more
400 KW Caterpillar C13, Diesel, 1800 RPM, 480V, 2023
Finning Canada | Edmonton, AB
Category: Diesel Generators
Seller: Finning Canada
Location: Calgary, AB
Mfr: Caterpillar
Model: C13
Year: 2023
| 400 kW | 60 hz | 480 V |
New, old stock / surplus.
FMC #C120, 12-Valve Rotary Piston Filler, 25 gallon Tank capacity, 3/4" Valve, 20" diameter Feed screw, 42" infeed/exit H
Genemco | Hearne, TX
Category: Filling Equipment (Fillers)
Seller: Genemco
Location: Hearne, TX
Mfr: Fmc
Model: C120
FMC 12-Valve Rotary Piston Filler. Model: C120. Tank capacity: 25 gallon. Valve dimensions: 3/4 in. Height at conveyor infeed/exit: 42 in. H. 20 in. dia. feed screw. Maximum can size dimensions: 3 in. W x 5 in. H. Overall dimensions: 61 in. L x 58 in. W x 84 in. H.(H17).
440 HP Caterpillar #C13, Industrial Power Unit (Core), 32k Hours, Tier 3, 2006
NineX Power Systems | Spring, TX
Category: Industrial Power Units
Seller: NineX Power Systems
Location: Houston, TX
Mfr: Caterpillar
Model: C13
Year: 2006
Used CAT C13 Industrial Power Unit; 2006 Model – 32,514 Hours; 415HP @ 2100RPM; Tier 3 Emissions; Engine Driven Radiator; SAE 1 Flywheel Housing; Electric Starter; Charging Alternator; Front Facing Exhaust; CAT Control Panel; *Good Rebuildable Core*, Engine: Manufacturer : Caterpillar Model : C13 Serial Number : ...more
400 KW Caterpillar #C13, open skid, EPA Tier 3, Surplus New 2024
Ring Power Systems | Saint Augustine, FL
Category: Diesel Generators
Seller: Ring Power Systems
Location: Saint Augustine, FL
Mfr: Caterpillar
Model: C13
Year: 2024
NEW Caterpillar Model C13 EPA Tier 3, Package Diesel Generator Set, 120/208V or Change to 277/480V, EMCP 4.2 Generator Control Panel, Auto Start/Stop, Engine Safety Shutdowns, CAT LC6114F Permanent Magnet Generator, Space Heater, 12 Lead & 105 Degree C, 1600A LSI, 1 x 400A LSI Circuit Breakers, Electronic ...more
300 HP Caterpillar #C11, remanufactured standard long block engine
Big Bear Engine Company | Parker, CO
Category: Diesel Engines
Seller: Big Bear Engine Company
Location: Parker, CO
Mfr: Caterpillar
Model: C11
Year: 2023
We offer a variety of both, over the road truck and industrial replacement engines for the Caterpillar C11. Our remanufactured CAT C11 engines come as a 3/4 long block and are not running trim condition. Our remanufacturing process strips the core down to the bare block whereas the camshaft, crankshaft, engine block ...more
430 HP Caterpillar #C13-ACERT, remanufactured standard long block engine - ARR - KCB
Big Bear Engine Company | Parker, CO
Category: Diesel Engines
Seller: Big Bear Engine Company
Location: Parker, CO
Mfr: Caterpillar
Model: C13
Year: 2023
CAT C13 ACERT ARR- KCB Remanufactured Long Block Engine, We offer a variety of both, over the road truck and industrial replacement engines for the Caterpillar C13. Our remanufactured CAT C13 engines come as a 3/4 long block and are not running trim condition. Our remanufacturing process strips the core down to the ...more
Featured
440 HP Caterpillar #C13, Tier 3 Rebuilt Power Unit
Svenco Sales | Shepherd, TX
Category: Industrial Power Units
Seller: Svenco Sales
Location: Shepherd, TX
Mfr: Caterpillar
Model: C13
Caterpillar C13 Tier 3 440HP Rebuilt Power Unit, Rebuilt CAT C13 Industrial Power Unit — 2006 model with a zero-hour rebuild, – 440 HP @ 2100 RPM, – Tier 3 emissions, – Engine-driven radiator & front-facing exhaust, – SAE 1 flywheel housing, electric starter & charging alternator ...more
JUST ADDED!
400 KW Caterpillar C13, Diesel, 1800 RPM, 480V, 2023
Finning Canada | Edmonton, AB
Category: Diesel Generators
Seller: Finning Canada
Location: Calgary, AB
Mfr: Caterpillar
Model: C13
Year: 2023
Old stock/surplus.
| 400kW | 480V | 60hz |, Package Type Cat Standard Unit.
430 HP Caterpillar #C13-ACERT, remanufactured standard long block engine - ARR - LEE
Big Bear Engine Company | Parker, CO
Category: Diesel Engines
Seller: Big Bear Engine Company
Location: Parker, CO
Mfr: Caterpillar
Model: C13
Year: 2023
CAT C13 ACERT ARR- LEE Remanufactured Long Block Engine, We offer a variety of both, over the road truck and industrial replacement engines for the Caterpillar C13. Our remanufactured CAT C13 engines come as a 3/4 long block and are not running trim condition. Our remanufacturing process strips the core down to the ...more
536 HP Caterpillar #C13, diesel engine, Tier 4F
Industrial Diesel Inc | Decatur, TX
Category: Diesel Engines
Seller: Industrial Diesel Inc
Location: Decatur, TX
Mfr: Caterpillar
Model: C13
ConditionUsed13097 hours tier 4 final serial number: KWJ00340.
440 HP Caterpillar #C13, Industrial Power Unit, Zero Hour Rebuild, Tier 3, 2006
NineX Power Systems | Spring, TX
Category: Industrial Power Units
Seller: NineX Power Systems
Location: Houston, TX
Mfr: Caterpillar
Model: C13
Year: 2006
Rebuilt CAT C13 Industrial Power Unit; 2006 Model – Zero Hour Rebuild; 440HP @ 2100RPM; Tier 3 Emissions; Engine Driven Radiator; SAE 1 Flywheel Housing; Electric Starter; Charging Alternator; Front Facing Exhaust; CAT Control Panel; Major Overhaul; Freshly Painted; Tested; Five Engines Available; Rebuild in ...more
Mazak #AJV-25/404, double column vertical machining center, 2 pallet changer, M-32 Control, 40" X, 20" Y, 18" Z, 40 automatic tool changer, 1991
Machnet | Santa Monica, CA
Category: Vertical CNC Machining Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Mazak
Model: AJV-25/404
Year: 1991
Mazak AJV 25/404 Double Column VMC; 2 Pallet Changer, M-32 Control, 40" x 20" x 18" Travels, Chip Conveyor, Mazak AJV 25/404 Double Column CNC Vertical Mill, New: 1991, Travels:, X-Axis: 39.37", Y-Axis: 20", Z-Axis: 18", Spindle Speed: 10,000 RPM, Spindle Motor: 25/20 HP, Spindle Taper: #40, Tool Magazine: 40 ATC ...more
JUST ADDED!
400 KW Caterpillar #400, Diesel Generator Set, 480 Volts, 621 HP @ 1800 RPM CAT engine, circuit breaker, sound attenuated enclosure, 1PH/3PH, 2023
Diesel-Powered.com | East Earl, PA
Category: Diesel Generators
Seller: Diesel-Powered.com
Location: East Earl, PA
Mfr: Caterpillar
Model: C13
Year: 2023
Stock#: IE400-177-CT Fuel: Diesel Year: 2023 Voltage: 480 Volts Hours: 0 Hours Phase: 1/3 Phase Make: Caterpillar Model: 400 Serial: CAT00C13TT3201262 Hertz: 60 Hz Wires: 12 Lead Kilo Watts: 400 kW Mounted: Skid Mounted Fuel Tank: Base Fuel Tank Enclosure: Sound Attenuated Enclosed: Enclosed Lead: Reconnectable ...more
420 HP Caterpillar #C13, industrial engine, 2018
Diesel-Powered.com | East Earl, PA
Category: Diesel Engines
Seller: Diesel-Powered.com
Location: East Earl, PA
Mfr: Caterpillar
Model: C13
Year: 2018
Stock#: IEEN-683-CT Year: 2018 Hours: 14023 Hours Length: 55" Width: 42" Height: 51" Weight: 3500 lbs Condition: Used Some Fire Damage Bell: To Fit 980 CAT Tran Flywheel: To Fit 980 CAT Tran.
Cat C13, S/N: RRA16111, 2022
Finning Canada | Edmonton, AB
Category: Diesel Engines
Seller: Finning Canada
Location: Calgary, AB
Mfr: Caterpillar
Model: C13
Year: 2022
New, old stock / surplus
OFF ROAD MOBILE ONLY, NOT FOR ON HIGHWAY TRUCK USE, Horsepower 475.0 hp.
Cat C13, S/N: N3H01829, 2022
Finning Canada | Edmonton, AB
Category: Diesel Engines
Seller: Finning Canada
Location: Calgary, AB
Mfr: Caterpillar
Model: C13
Year: 2022
New, old stock / surplus
OFF ROAD MOBILE ONLY, NOT FOR ON HIGHWAY TRUCK USE, Horsepower 496.0 hp.
400 KW Caterpillar #C13, diesel generator set, 277/480 Volts, 3-phase, 1371 hours, 609 HP @ 1800 RPM, Tier 3, electronic governor, 2019
DEPCO Power Systems | Houston, TX
Category: Diesel Generators
Seller: DEPCO Power Systems
Location: Houston, TX
Mfr: Caterpillar
Model: C13
Year: 2019
Generator Set Type: Stand-By Engine Model: C13 Fuel Type: Diesel Voltage: 277/480 Model: C13 Panel: with Autostart and Safety Shutdowns Batteries: Yes Hours: 1371 Since New Frequency: 60 Cycles/Hz Phase: Three Phase.
447 KW Caterpillar C13, Stationary Generator Set, Diesel, 1800 RPM, 480V, 4 hours, 2022
Finning Canada | Edmonton, AB
Category: Diesel Generators
Seller: Finning Canada
Location: Calgry, AB
Mfr: Caterpillar
Model: C13
Year: 2022
60Hz 480V, 12 Hour Integral Tank (Dual Wall), Base Tank, Battery Set, Cat Brand Genset, Control Panel - GCCP1.2, CSA Certification, Emissions Level, Engine Type - Diesel, Frequency - 60 Hz, Generator, No Enclosure, Rating - Standby, Regulatory Status - EPA Emergency Stationary @ Constant Speed, UL 2200 Listed ...more
440 HP Caterpillar #C13, Industrial Power Unit (Core), 32k Hours, Tier 3, 2006
NineX Power Systems | Spring, TX
Category: Industrial Power Units
Seller: NineX Power Systems
Location: Houston, TX
Mfr: Caterpillar
Model: C13
Year: 2006
Used CAT C13 Industrial Power Unit; 2006 Model – 32,121 Hours; 415HP @ 2100RPM; Tier 3 Emissions; Engine Driven Radiator; SAE 1 Flywheel Housing; Electric Starter; Charging Alternator; Front Facing Exhaust; CAT Control Panel; *Good Rebuildable Core*, Engine: Manufacturer : Caterpillar Model : C13 Serial Number : ...more
450 HP Caterpillar #C11, Core Diesel engine, S/N RSX05898
Collicutt Energy Services | Red Deer, AB
Category: Diesel Engines
Seller: Collicutt Energy Services
Location: Red Deer, AB
Mfr: Caterpillar
Model: C11
Cat C11 core diesel engine, s/n RSX05898.
JUST ADDED!
520 HP Caterpillar #C-13, diesel engine, 2100 RPM, 12.5L, reman, 2008
Diesel Sales | Chicago, IL
Category: Diesel Engines
Seller: Diesel Sales
Location: Chicago, IL
Mfr: Caterpillar
Model: C-13
Year: 2008
520 HP Caterpillar #C13, diesel engine, 2100 RPM, rblt.
Industrial Diesel Inc | Decatur, TX
Category: Diesel Engines
Seller: Industrial Diesel Inc
Location: Decatur, TX
Mfr: Caterpillar
Model: C13
ConditionUsed4355 hours serial number: KWJ01002.
Caterpillar C-13, Complete Diesel Engine, Rebuilt
Diesel Sales | Chicago, IL
Category: Diesel Engines
Seller: Diesel Sales
Location: Chicago, IL
Mfr: Caterpillar
Model: C-13
Premium Remanufactured Caterpillar C-13 Complete Diesel Engine Starting At $43995.00 For Off Road Application Egr Applications Add $10,000. Exchange With One Year Or 2,000 Hrs. Whichever Occurs First, Limited Parts & Labor Warranty. Off Road Application. Plus $15,000.00 Refundable Core Deposit, Pricing May Vary ...more
Caterpillar #C13, engine, rblt.
Industrial Diesel Inc | Decatur, TX
Category: Diesel Engines
Seller: Industrial Diesel Inc
Location: Decatur, TX
Model: C13
CategoryEngineManufacturerCATERPILLARModelC13ConditionRebuiltRebuilt C13 Caterpillar Engine ENGINE IS BUILT UPON ORDER AND SUBJECT TO PART AVAILABILTY.Industrial Diesel Inc. offers a broad range of remanufactured diesel engines for the off-highway and industrial market.All remanufactured engines are completely ...more
Caterpillar C-13, Complete Diesel Truck Engine, Used
Diesel Sales | Chicago, IL
Category: Truck Engines
Seller: Diesel Sales
Location: Chicago, IL
Mfr: Caterpillar
Model: C-13
Good Tested Truck Starting At $14995.00 Exchange With 100 Day Parts Warranty Plus $2,000.00 Refundable Core Deposit.
275 HP Caterpilar #C-11, Engine Assembly
Diesel Sales | Chicago, IL
Category: Diesel Engines
Seller: Diesel Sales
Location: Chicago, IL
Mfr: Caterpillar
Model: C-11
275 Hp- Complete Good Running, Dyno Tested With New Rod And Main Bearings, Front And Rear Seal, Exchange With Six Month Parts Warranty Plus $2,500.00 Refundable Core Deposit. 14m, 2269770 Nice, Ready To Ship.14m Freight Us48 Included In Our Price.
450 HP Caterpillar #C11, industrial diesel engine
Global Power | Nisku, AB
Category: Diesel Engines
Seller: Global Power
Location: Nisku, AB
Mfr: Caterpillar
Model: C11
Cat C11 450 HP, Available at Global Power Systems, www.globalpower.ca.
JUST ADDED!
450 HP Caterpillar #C11, industrial diesel engine
Global Power | Nisku, AB
Category: Diesel Engines
Seller: Global Power
Location: Nisku, AB
Mfr: Caterpillar
Model: C11
Cat C11 450HP, Available at Global Power Systems, www.globalpower.ca.
Supermax #Series-2, ram type vertical mill, 11" x51" table, 5 HP, 2-Axis digital read out, 1985, #64117
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Supermax
Model: SERIES-2
Year: 1985
SERIAL. 30577, MODEL. SUPERMAX SERIES 2, YEAR. 1985, TABLE WORK SURFACE. 51" X 11", LONGITUDINAL TABLE TRAVEL. 39-3/8", CROSS TABLE TRAVEL. 12", VERTICAL TABLE TRAVEL. 18", LONGITUDINAL & CROSS FEEDS. (12) 1/2 - 23-3/4 IPM, LONGITUDINAL & CROSS RAPID FEEDS. 118 IPM, VERTICAL RAPID FEED. 31-1/2 IPM, SPINDLE ...more
Weinig #U-1000, Feed-Through Moulder, 5-Head, 9.06" x 4.75" capacity, 1.8" Spindle diameter, 20-118 FPM, 10/15/20/25 HP Motors, 6000/7000 RPM, 2004
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Weinig
Model: U 1000
Year: 2004
WEINIG - UNIMAT 10005-Head (B-R-L-T-B), 9-1/16" x 4-3/4" cap. -- Head sequence: Bottom 10 HP; right 15 HP; left 15 HP; top 25 HP; 20 HP motor. -- WEINIG "Memory Re-Dial" System with: Storage of (100) separate profiles; electronic LED readouts for all spindles. -- Spindle dia. 1-13/16" with Cutterhead speeds: Spindle ...more
110 Ton, Scotchman #PressPro110, hydraulic h-frame press, 15" stroke, 36.5" DL, 43.25" BH
C.W. Wood Machinery Inc | Cincinnati, OH
Category: H Frame Hydraulic Press Machines
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Scotchman
Model: PRESSPRO110
(NEW) SCOTCHMAN H-FRAME HYDRAULIC PRESS, MODEL: PressPro 110, *Heavy Duty All-Steel Construction, *Industrial Grade Hydraulic System, *Ram Moves Laterally For Added Versatility, *Three Ram Speeds, FACTORY, Press Force: 110 Tons, Stroke: 15", Open Height, Minimum: 7", Open Height, Maximum: 36-1/2", Width Between ...more
8.75" x 14.5" Roll-In #EF-1459, vertical band saw, 8-1/2" rounds, 70-525 FPM, 1 HP, new
C.W. Wood Machinery Inc | Cincinnati, OH
Category: Vertical Band Saws
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Roll-In
Model: EF-1459
(NEW) ROLL-IN VERTICAL BAND SAW, MODEL: EF1459, "The EF1459 is actually a horizontal band saw on a vertical frame. An all-purpose band saw, it handles all metals, plastics, and woods in a variety of cuts. It is a fast, accurate cut-off machine that is perfect for notching, slitting and slotting. A reliable addition to ...more
.24" x 2.2" Asahi Okuma #RH-60, 2 Die 3 Blow Header, 200 PPM, PKO, 1988
Machinery Exchange International | Posen, IL
Category: Progressive Headers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Okuma
Model: RH-60
Year: 1988
Wire Diameter: M6, Max Cut Off Length: 55 mm, Min Cut Off Length: 6 mm, Max K.O. Length: 55 mm (1st Die and 2nd Die), 2nd PKO K.O. Length: 18 mm, 3rd PKO K.O. Length: 12 mm, Main Motor: 10 HP, PPM: 100 – 200 pcs/min, Heading Tonnage: 30 Metric Tons, Relieving K.O. Stroke: 2MM, Year: 1988, Voltage: 220V 60HZ 3PH ...more
10 Ton, Korsch #XL-800, tablet press, 87 station, #2705-1
Federal Equipment Company | Cleveland, OH
Category: Tablet Press Machine
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Korsch
Model: XL-800
Used Korsch XL 800 rotary tablet press, 87 station. 100 Kn main compression with 100 kN pre-compression, "BB" tooled, dual sided, 13 mm max tablet diameter, 18 mm max depth of fill with single layer, bi-layer capable with 16 mm max depth of fill, 10 mm max second layer depth of fill, speeds up to 939,600 tablets/hour ...more
32" x 192" LeBlond #3220, lathe, 2-1/16" spindle bore, Mitutoyo 2-Axis digital read out, Steady Rest, #16319
Vander Ziel Machinery Sales | Alto, MI
Category: Engine Lathes
Seller: Vander Ziel Machinery Sales
Location: Alto, MI
Mfr: Leblond
Model: 3220
LeBlond 32” x 192” Lathe, 2 1/16” Spindle Bore, Model 3220, Serial # 3NFL-1224, Asset # 16319, Swing over Bed 32”, Distance between Centers 200”, Number of Spindle Speeds 36, Range of Spindle Speeds 10-1300 RPM, Diameter of Spindle Bore 2 1/16”, Bed With 24 1/2”, Carriage ...more
14 gauge x 10' GMC #EPS-1014E, mechanical shear, 26 SPM, 36" front operated power back gauge, (2) 24" front support arms, 60" squaring arm
Manufacturing Solutions | Santa Ana, CA
Category: Power Squaring Shears (Gauge)
Seller: Manufacturing Solutions
Location: Santa Ana, CA
Mfr: Gmc
Model: EPS-1014E
Shears, Mechanical120"14 Ga (Mild Steel), 18Ga. (Stainless Steel)121"2630.5"24"36" Power Back Gauge2.0 Degree7.5 HP, 3 Phase, 220 V / 25A (15A/440VAC optional)147" x 57" x 53"7,350 Lbs..
Millport #4VH, vertical ram type mill, 9" x42" table, 2 HP, R-8, one shot lube, 1986, #74637
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Millport
Model: 3VH
Year: 1986
SERIAL. 6102, MODEL. 3VH, YEAR NEW. 1986, AREA OF TABLE. 9" X 42", SPINDLE SPEEDS (VARIABLE). 60 TO 4250 RPM, SPINDLE FEEDS.0015,.003,.006 IPR, LONGITUDINAL TABLE TRAVEL. 30", CROSS TRAVEL. 12", VERTICAL TRAVEL OF KNEE. 16", QUILL TRAVEL. 5", POWER LONGITUDINAL FEED. SERVO, POWER CROSS FEED. SERVO, DEPTH OF THROAT. ...more
121 Ton, Aida #C1-11, Gap Frame Press, 7" stroke, 13.7" Shut Height, 3.94" ram adjustment, 30-50 SPM, Palm Button Control, Air Clutch, C1-11
Southern Fabricating Mchy Sales | Lithia, FL
Category: Gap Frame Single Crank Press Machines
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Aida
Model: C1-11
121 Ton Gap Frame Press with Palm Button Control, Air Clutch, Air Brak, Air Counterbalance and T-Slotted Ram & Bolster, Capacity: 121 Tons, Stroke: 7”, Shut Height Over Bolster: 13.7”, Ram Adjustment: 3.94”, Stroke Speed: 30 - 50 SPM, INCLUDES: Palm Button Control, Air Clutch, Air Brak, Air ...more
JUST ADDED!
16" x 40" KBC Tools #Grip-1640GH, gap bed engine lathe, 18-7/16" swing over cross slide, 3-jaw 8" chuck, 2-Axis Newall digital read out, 5 HP
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Kbc
Model: GRIP-1640GH
SERIAL., MODEL. GRIP1640GH, YEAR NEW., SWING OVER WAYS. 16", SWING OVER CROSS SLIDE. 18-7/16", SWING IN GAP. 21-1/4", DISTANCE BETWEEN CENTERS. 40", SPINDLE SPEEDS. (12) 45 TO 1800 RPM, ENGLISH FEEDS.0022 TO.050 IPR, ENGLISH THREADS. 2 TO 72 TPI, METRIC PITCHES.02 TO.14 MM, SPINDLE BORE. 2", CHUCKS. 8" 3-JAW, FOOT ...more
Komo #VR-508, CNC router, 5' x 8' table, 8 ATC, 18k RPM, ISO 30, 12 HP, 97" X, 84" Y, 6" Z, 1998
Ex-Factory | Charlotte, NC
Category: Woodworking CNC Routers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Komo
Model: VR-508
Year: 1998
KOMO VR 508 CNC Router 5 X 8 with ATC: -- :60" x 96" Moving table with (2) 48" vacuum zones, 2" thick solid cast aluminum plate, machined vacuum table w/ground surface finish, extra Heavy Duty fixed gantry bridge. -- :(1) 12 HP Colombo "ATC" router w/ ISO 30 taper tool holders for vertical routing, variable speed ...more
10 Ton, Korsch #XL-800, 100 Kn main, 100 Kn pre, 71 station, B-tld, dual sided, 16mm max diameter, 18mm depth, 766,800 tabs/hr, 2003, 347269, 2003
Federal Equipment Company | Cleveland, OH
Category: Tablet Press Machine
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Korsch
Model: XL-800
Year: 2003
Used Korsch XL 800 rotary tablet press, 71 station. 100 Kn main compression with 100 Kn pre-compression, "B" tooled, dual sided, 16 mm max tablet diameter, 18 mm max depth of fill with single layer, bi-layer capable with 16 mm max depth of fill, 10 mm max second layer depth of fill, speeds up to 766,800 tablets/hour ...more
JUST ADDED!
140 Ton, Wysong #MTH-140-144, hydraulic press brake, 12' overall, 120" between housing, 8" stroke
Federal Equipment Div | Ronkonkoma, NY
Category: Hydraulic Press Brakes
Seller: Federal Equipment Div
Location: Ronkonkoma, NY
Mfr: Wysong
Model: MTH-140-144
Year: 1991
140 Ton x 12' Wysong Hydraulic Press Brake Model MTH-140-144, New 1991, Capacity. 140 Ton x 12' Length of Bed & Ram. 144" Distance Between Housings. 120" Ram Stroke (Variable). 8" Max. Die Space. 17" Closed Height. 9" Ram speeds: Rapid Approach. 300 IPM Pressing. 20 IPM Return. 225 IPM Throat. 7" Motor. 15 HP / ...more
Caterpillar #C13IN, diesel engine, 1 hr, 2023
Foley Equipment - Power | Wichita, KS
Category: Diesel Engines
Seller: Foley Equipment - Power
Location: Wichita, KS
Model: C13IN
Year: 2023
s *456 BHP IND A TIER *ADAPTER GP FAN *AIR CLEANER BOX TYPEIPU *AIR INLET ELBOW DOWN *ALTERNATOR GP *BELT GP *BREATHER GP *CEM OUTLET ELBOW 90 DEG *CERTIFICATION AR EPA/EU 2011 *CONF STD *COVER GP V MECH *DRAIN *DRIVE GP FAN *END USE: INDUSTRIAL/OEM *ENGINE ARC13B STAGE V INDA T *ENGINE ARCORE *ENGINE MOUNTED CEM ...more
Caterpillar #C13IN, diesel engine, 1 hr, 2024
Foley Equipment - Power | Wichita, KS
Category: Diesel Engines
Seller: Foley Equipment - Power
Location: Wichita, KS
Model: C13IN
Year: 2024
Notes *REPRESENTATIVE PHOTO*, s *456 BHP IND A TIER *ADAPTER GP FAN *AIR CLEANER BOX TYPEIPU *AIR INLET ELBOW DOWN *ALTERNATOR GP *BELT GP *BREATHER GP *CEM OUTLET ELBOW 90 DEG *CERTIFICATION AR EPA/EU 2011 *CONF STD *COVER GP V MECH *DRAIN *DRIVE GP FAN *END USE: INDUSTRIAL/OEM *ENGINE ARC13B STAGE V INDA T *ENGINE ...more
Caterpillar #C13IN, diesel engine, 1 hr, 2023
Foley Equipment - Power | Wichita, KS
Category: Diesel Engines
Seller: Foley Equipment - Power
Location: Wichita, KS
Model: C13IN
Year: 2024
Notes *REPRESENTATIVE PHOTO*, s *456 BHP IND A TIER *ADAPTER GP FAN *AIR CLEANER BOX TYPEIPU *AIR INLET ELBOW DOWN *ALTERNATOR GP *BELT GP *BREATHER GP *CEM OUTLET ELBOW 90 DEG *CERTIFICATION AR EPA/EU 2011 *CONF STD *COVER GP V MECH *DRAIN *DRIVE GP FAN *END USE: INDUSTRIAL/OEM *ENGINE ARC13B STAGE V INDA T *ENGINE ...more
Caterpillar #C13IN, diesel engine, 1 hr, 2023
Foley Equipment - Power | Wichita, KS
Category: Diesel Engines
Seller: Foley Equipment - Power
Location: Wichita, KS
Model: C13IN
Year: 2023
Notes *REPRESENTATIVE PHOTO*, s *456 BHP IND A TIER *ADAPTER GP FAN *AIR CLEANER BOX TYPEIPU *AIR INLET ELBOW DOWN *ALTERNATOR GP *BELT GP *BREATHER GP *CEM OUTLET ELBOW 90 DEG *CERTIFICATION AR EPA/EU 2011 *CONF STD *COVER GP V MECH *DRAIN *DRIVE GP FAN *END USE: INDUSTRIAL/OEM *ENGINE ARC13B STAGE V INDA T *ENGINE ...more
Eurotech #B465/Y2, CNC Multi-axis Lathe, 2.6" bar, 8" chuck, 20 HP, 5000 RPM, 13.4" diameter x 37.5" L max, 192 tools, Fanuc 31i-B, 2012
Revelation Machinery | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Eurotech
Model: B465/Y2
Year: 2012
Make: Eurotech, Model: B465/Y2, Year: 2012, Machine Location: Upon Request, Bar Capacity: 2.625″, Chuck Size: 8″, Main Spindle Power: 20 hp, Main Spindle Speed: 5,000 rpm, Sub Spindle Speed: 5,000 rpm, Max. Turning Diameter: 13.4″, Max. Turning Length: 37.5″, X-Axis Travel: 6.7″, X2-Axis ...more
Citizen #C16, Swiss Type CNC Lathe
Universal Automatics | Richfield, OH
Seller: Universal Automatics
Location: Richfield, OH
Mfr: Citizen
Model: C16
Year: 2008
CITIZEN C16 SWISS TYPE CNC LATHE PACKAGE (used) 4 machines available - (1) 2008 C16 VII 4 live tools, X/Z axis sub spindle(1) 2003 C16 VII - 4 live tools, X/Z axis sub spindle long parts collection attachment(1) 2005 C16 VI 3 live tools, Z axis sub spindle - long parts collection attachment(1) 2005 C16 VI 3 live ...more
225 Ton, Pacific #K225-10, hydraulic press brake, 10' overall, 1020" between housing, 12" stroke, 1979
Aleco Machinery Sales | Milwaukee, WI
Category: Hydraulic Press Brakes
Seller: Aleco Machinery Sales
Location: Milwaukee, WI
Mfr: Pacific
Model: K225-10
Year: 1979
Pre Owned 1979 Pacific Model K225-10 Hydraulic Press Brake, Serial Number, Capacity 500 TONS, Overall Length of Bed & Ram 10’, Distance Between Housings 8’5”, Stroke 12”, Open Height 17”, Closed Height 5”, Throat Clearance 8”, Speeds, Approach 165 IPM, Form 10 -18 IPM ...more
225 Ton, Pacific #K225-10, hydraulic press brake, 10' overall, 101" between housing, 12" stroke, 1979
Aleco Machinery Sales | Milwaukee, WI
Category: CNC Press Brakes
Seller: Aleco Machinery Sales
Location: Milwaukee, WI
Mfr: Pacific
Model: K225-10
Year: 1979
Pre Owned 1979 Pacific Model K225-10 Hydraulic Press Brake, Serial Number, Capacity 500 TONS, Overall Length of Bed & Ram 10’, Distance Between Housings 8’5”, Stroke 12”, Open Height 17”, Closed Height 5”, Throat Clearance 8”, Speeds, Approach 165 IPM, Form 10 -18 IPM ...more
Biesse #Roxyl-5.5, edgebander w/ pre-mill & corner rounding, 2013
Ex-Factory | Charlotte, NC
Category: Woodworking Edgebanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Biesse
Model: ROXYL-5.5
Year: 2013
BIESSE - ROXYL 5.5: Edgebander (w/Premill & Corner Rounding)Edgebanding Cap. - Edge thickness for strips: Min./max.: 0.4 - 22 mm (0.02" - 0.87"); coiled material from: 0.4 - 3 mm (0.02 - 0.12"); panel thickness from: 10 - 60 mm (0.39 - 2.36"); workpiece width; Min.: 85 mm (3.34"); workpiece length min.: 140 mm ...more
660 HP Caterpillar #C16, Diesel Engine, 2100 RPM
LarMar Industries Inc. | Midland, TX
Category: Diesel Engines
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Caterpillar
Model: C16
BRAND: CaterpillarMODEL: CAT C-16 IndustrialCONDITION: UsedSERIAL NO: BFM01644REFERENCE: UC2305C-16 CAT Industrial Engine Radiator through Flywheel; 660bhp@2100rpm; sae#0, Suction fan, SAE#0; Flywheel; 24V E/S & Alternator; TCC ; replaced one cylinder, reman head, and reworked the fuel! Tested, Serviced & ...more
6' -19" Carlton #4A, radial arm drill, 50" x77" base, power elevation & clamping, 15 HP, #66839
Yoder Machinery Sales | Holland, OH
Category: Radial Drills
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Carlton
Model: 4A
SERIAL. 4A-3829, MODEL. 4A, LENGTH OF ARM. 72", DIAMETER OF COLUMN. 19", WORKING SURFACE OF BASE. 77" X 50", SPINDLE SPEEDS. (36) 15 TO 1500 RPM, FEEDS. (18).004 TO.125 IPR, THREADS. 8, 11-1/2, 14, 18 TPI, SPINDLE TRAVEL. 20", DIAMETER OF SPINDLE. 4", TAPER IN SPINDLE. #6 MT, DISTANCE SPINDLE TO COLUMN. 13-1/4" ...more
Holz-Her #1402-HF, compact edgebander, 35 FPM, 1998
Ex-Factory | Charlotte, NC
Category: Woodworking Edgebanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Holz-Her
Model: 1402-HF
Year: 1998
HOLZ-HER 1402 HF Compact Edgebanders: -- Cartridge glue system, 3 mm edge thickness cap., -- Semi-automatic feed magazine, coil stock feeds automatically with guillotine cutoff, all strip stock is fed manually with pusher bar to advance the Edgebanding. Digital glue height indicator.Workstations: -- Double motor end ...more
15 Ton, Yale, 29' Span, 26' lift, Class D, pendant, VFD bridge, 2011, #2692
Highland Machinery & Crane | Benton Harbor, MI
Category: Overhead-Bridge Cranes
Seller: Highland Machinery & Crane
Location: Benton Harbor, MI
Mfr: Yale
Year: 2011
Make Yale Capacity 15 Tons Span 29' 0" Available Lift 26' Class D Crane Headroom 26" Wheelbase 54" Overall End Truck Length 72" Year 2011 S/N G31846PA Control Pendant Electrical 460/3/60 Status Taken Down Bridge Speed ~ 80 FPM Max, VFD Bridge Power 2 HP x 2 Trolley Speed 50 / 15 FPM Trolley Power 1 HP Hoist Speed 18 / ...more
60 Ton, FlexoPress #SA60-30-24, straight side double crank, 2" stroke, 8" Shut Height, 2" ram adj., 100-400 SPM, 32" x24"bed, 14" windows, air clutch & brake, Wintress Control, Smart Pac Pro, Yaskawa V-1000 frequency drive
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Flexopress
Model: SA60-30-24
2" STROKE, 8" SHUT HEIGHT OVER BOLSTER, 2" RAM ADJUSTMENT, 100-400 SPM, 32" X 24" BED, 27" X 18" RAM, 14" WINDOWS, YASKAWA V-1000 FREQUENCY DRIVE, AIR CLUTCH, AIR BRAKE, AIR COUNTERBALANCE, WINTRESS CONTROLS, SMART PAC PRO, LIGHT CURTIANS FRONT AND REAR, 72" LR X 56"FB X 120"T APPROX., 18,000 LBS APPROX, 36" X 24" X ...more
3' -9" Carlton, HD radial arm drill, 57" under spindle, #4MT, 3 HP, power elevation, 26" x 33" tilt box table, ser.0A190
Machinery Consultants Inc | Salt Lake City, UT
Category: Radial Drills
Seller: Machinery Consultants Inc
Location: Salt Lake City, UT
Mfr: Carlton
We are pleased to offer, subject to prior sale and our conditions of sale, the following for your consideration:, Almost New Natco Carlton Heavy Duty 3'x9” Radial Arm Drill, Serial No: OA1477, are approximate and are subject to verification., Max Distance Column to Spindle: 36”, Max Height Under ...more
4' -9" Carlton, #4MT, 52" under spindle, 100-2000 RPM, 5 HP, power elevation, tilting box table
Machinery Consultants Inc | Salt Lake City, UT
Category: Radial Drills
Seller: Machinery Consultants Inc
Location: Salt Lake City, UT
Mfr: Carlton
We are pleased to offer, subject to prior sale and our conditions of sale, the following for your consideration:, Almost New Only 1202 Hours on the Meter!, Pre-Owned Carlton 4’ x 9″ Radial Arm Drill, Serial No: 0A1356, are approximate and are subject to verification., Max Distance Column to Spindle: ...more
JUST ADDED!
5' -15" Carlton #3A, radial drill, 65" x 42" base area, #5MT, power elevation/clamping/traverse, 15 HP
Yoder Machinery Sales | Holland, OH
Category: Radial Drills
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Carlton
Model: 3A
SERIAL. 3A, MODEL. 3A, AREA OF BASE. 65" X 42", SPINDLE SPEEDS. (36) 15 TO 1500 RPM, SPINDLE FEEDS. (18).004 TO.125 IPR, TAP LEADS. 8, 11-1/2, 14, 18 TPI, SPINDLE TRAVEL. 18", DIAMETER OF SPINDLE. 3-3/16", TAPER IN SPINDLE. #5 MT, DISTANCE SPINDLE TO BASE. 10-1/2" MIN, 66" MAX, DISTANCE SPINDLE TO COLUMN. 15" MIN, 60" ...more
5' -15" Carlton #3A, radial arm drill, 65" x 42" base area, power elevation/clamping/traverse, 15 HP
Yoder Machinery Sales | Holland, OH
Category: Radial Drills
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Carlton
Model: 3A
SERIAL. 3A4471, MODEL. 3A, AREA OF BASE. 65" X 42", SPINDLE SPEEDS. (36) 12 TO 1200, SPINDLE FEEDS. (18).004 TO.125 IPR, TAP LEADS. 8, 11-1/2, 14, 18 TPI, SPINDLE TRAVEL. 18", DIAMETER OF SPINDLE. 3-3/16", TAPER IN SPINDLE. #5 MT, DISTANCE SPINDLE TO BASE. 10-1/2" MIN, 66" MAX, DISTANCE SPINDLE TO COLUMN. 15" MIN, 60" ...more
8' -19" Carlton, radial drill, power elevation & clamp, 40 HP, #6MT, #5629
Yoder Machinery Sales | Holland, OH
Category: Radial Drills
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Carlton
SERIAL. 4A-4317, SPINDLE SPEEDS. (36) 15 TO 1500 RPM, FEEDS. (18).004 TO.125 IPR, THREADS. 8, 11-1/2, 14, 18 TPI, SPINDLE TRAVEL. 20", DIAMETER OF SPINDLE. 4", TAPER IN SPINDLE. #6 MT, DISTANCE SPINDLE TO COLUMN. 13-1/4" MIN. / 96" MAX., DISTANCE SPINDLE TO FLOOR. 52" MIN. / 94" MAX., TRAVEL OF HEAD ON ARM. 82-3/4" ...more
JUST ADDED!
26" x 240" LeBlond #Regal, engine lathe, 18" swing over cross slide, 4-jaw 21" chuck, 2 steady rests, 15 HP, 1976
Belmont Machinery Co | Aurora, IL
Category: Engine Lathes
Seller: Belmont Machinery Co
Location: Aurora, IL
Mfr: Leblond
Model: REGAL
Year: 1976
Size 26"x20'cc Make LEBLOND Year 1976, ONE USED - 26”x 20’cc LEBLOND Engine Lathe, Model: REGAL, Serial Number: 5H827, New 1976, 26” Swing Over Bedways, 18” Swing Over Cross Slide, Hardways, Taper Turning Attachment, Inch Threading, Spindle Speeds from 18 to 720 RPM, 2.25” Spindle ...more
JPW #C2-83-139TULEP480V45-60KW, Conveyor Oven, 2 zone, separate controls, shared exhaust, 42" width, 200°C max, 4.5" thick walls, 480 V., AB PLC, raised on skid frame, 2023
Source Machinery Sales | Fridley, MN
Category: Conveyorized Ovens
Seller: Source Machinery Sales
Location: Fridley, MN
Mfr: Jpw
Model: C2-83-139TULEP480V45-60KW
Year: 2023
Located in Minneapolis, Minnesota, this JPW Industrial 40 Conveyor Curing Oven offers high-capacity, precision-controlled thermal processing and can be inspected under power. To schedule an inspection, please contact us., This 2023 oven, model C2-83-139TULEP480V45-60KW, is designed for continuous conveyor curing ...more
JUST ADDED!
NTN 30211 (4T-30211) Bearing - 55mm ID x 100mm OD x 22.75mm Width - New
MRO Exchange | Fairfield, IL
Category: Ball & Roller Bearings
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Ntn
The NTN 4T-30211 is a single row tapered roller bearing with a 55 mm bore, 100 mm outside diameter, and 22.75 mm overall width. The 4T prefix designates NTN's case carburized steel construction, engineered to deliver improved fatigue life and shock load resistance compared to standard through hardened tapered ...more
18 Stand, B & K, rollforming line, 50" x 4" arbor, 60" OD, 20"-24" ID, 120 FPM, 2002
D & H Machinery Inc | Toledo, OH
Category: Rollformers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: B & K
Year: 2002
Materials: Painted, Galvanized, Maximum Coil: 50" (Incoming), Thickness Range: 0.017" - 0.035", Maximum Yield: 80,000 PSI, Maximum Coil Weight: 13,000 lbs., Coil I.D.: 20" - 24" (Approx.), Maximum Coil O.D.: 60", Line Direction: Right to Left, Line Speed: 0 - 120 FPM, Max. Finished Bundle: 30,000# @ 55' ...more
Mighty Viper vertical turret lathe, 43.3"-118" table diameter, 51.18"-157" turning diameter, new, build to order
Relco Industries | Southampton, PA
Category: Vertical Boring Mills & VTL's
Seller: Relco Industries
Location: Southampton, PA
Mfr: Mighty Viper
11/14~30/40 VTL-Series is designed for large parts turning and s an optional milling function. The VTL-11/14 is desgned with optional twin turrets for simultaneous O.D. and I.D. cutting., Table Diameter 43.3~118 (1100~3000), Turning Diameter Max. 51.18~157 (1200~4000), Swing Max. 55.1~157 (1600~4000), Table Load Max. ...more
25 Ton, Richards Multiform #BBC, horizontal press brake, 8" x1/2" capacity, 4" stroke, 9-18 SPM, foot pedal
Generation Machine Tools | Sarasota, FL
Category: Hydraulic Press Brakes
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Richards
Model: BBC
RICHARDS MULTIFORM BBC Horizontal Press Brake 8” x1/2” 25 Ton USA, Reference #6589, Model # BBC, Serial # 531BBC, Tonnage- 25 Ton, Capacity- 8” x ½” mild steel / 6” x 5/8” mild steel / 4” x ¾” mild steel, Stroke- 4”, Speed- 9 – 18 Strokes Per ...more
