Buy or Sell Your 200 HP VFD

Experience smooth and efficient motor control with the ABB 30HP VFD ACH550BCR088A2+F267. Perfect for various industrial applications, this motor operates at 80 amps, ensuring reliable performance. - Handles high-power applications with ease- User-friendly interface for easy operation- Durable construction for ...more

Coil weight capacity: 8000 pounds, Coil width capacity: 18 inches, Minimum expansion range: 19.5 inches, Coil weight capacity: 8,000 Lbs., Coil width capacity: 18", Stock thickness capacity:.156" x 18" Wide, Stock thickness capacity:.187" x 12" Wide, Expansion range: 19.5" - 24.5" (To be confirmed), Coil OD capacity: ...more

475 HP 550A Delta C2000 VFD drive, VFD3550C43A, 460 Volts 3 phase, Speed/torque/position control mode, dual rating design (Normal duty/heavy duty) Outstanding 4-quadrant torque control/limit 2 in 1 (induction motor and synchronous motor) Built-in Delta PLC function, safe stop function and brake unit Support of various ...more

MCKAY 2-1/2" PILGER MILL UPGRADED TO CONTINUOUS OPERATION, MAXIMUM DIAMETER STARTING SHELL: 2 3/4", FINISHED TUBE SIZE RANGE: 3/4" TO 2 1/4", MAXIMUM LENGTH STARTING SHELL: 20' - 0", DIE DIAMETER:, MAXIMUM: 14.250", MINIMUM: 14.000", WORKING DIE LENGTH: 18.50", MACHINE SPEED RANGE: 55 TO 165 RPM, MACHINE FEED ...more

Cat No. ACH550-BD-097A-4, 380-480V, 96A, 75 HP, w\/Enclosure, Cat No. ACH550-BD-097A-4 30-Day Warranty & Functional Guarantee, Shop with confidence! We guarantee everything we sell to be fully functional. Your purchase is backed by our 30-day warranty—if it doesn’t work as described, we’ll ...more

Complete Run Tested Ready To Go With 100 Day Parts Warranty On The Block And The Crank, 300 Hp At 1800 Rpm, Caps Fuel System, Starting At $17,995.00.

SKU: 139567, Model: WF500, Condition: Used, S/N: WFS00106, Additional :, Power: 500hp (355kW).

60 HP Enclosed VFD system w/disconnect, Nema 1, 460 Volts.

Brand/Model: Allten AQ-250 : Used Allten AQ-250 Inline gear reducer gearbox with following s: • 250 HP Service Rating • 250 HP Catalogue Rating • 4.448:1 Ratio • 1150 Input Speed • 393 Output Speed • 1.5 Service Factor • Weight • Dims HP: 250 RPM: 1150/393 Ratio: 4.4480.

BC 5X673A 110-125 VAC 590-708 MFD STOCK #K-2308.

Hyundai Crown Triton, 75HP, 1800RPM (2 and 6 pole variations also available), 365T Frame, • NEMA Premium Efficiency • 40 Ambient temperature • Altitude 3,300 ft. • Continuous duty (S1) • Insulation Class F • Insulation systems meets NEMA MG-1 Part 31 • Class B Temperature Rise (Class ...more

Long Block Assembly Starting At $17295.00 Offered Exchange With One Year Warranty, Plus $2,500.00 Refundable Core Deposit. Price Includes Freight Us 48, Pricing May Vary Depending On The Application Or Sn#. Add Abs #12139 Warranty.

Used 1,400 gallon Ross Tank Mounted Versamix, Model VM1400, carbon steel construction, approximately 6' diameter x 6' straight side, fully removable dish top, dish bottom, rated 10 PSI at 200 f internal, jacketed on straight side for 15 PSI at 200 f, 200 HP two tier 3 blade turbine agitator thru Falk Gear Box ...more

125 HP Enclosed VFD system w/disconnect, Nema 1, 460 Volts.

Brand/Model: Young Touchstone MWF : New Surplus 2500/1500 hp radiator assembly HP: 2500 RPM.

SKU: 130482, Model: ACS880-01-035A-7, Condition: Used - Like New, Electrical :, Horsepower: 15 hp, Voltage: 600 volts, Phase: 3-phase, Amps: 19 amps, Dimensions: 43.00 (H) x 31.00 (W) x 47.00 (L) inches, Additional :, VFD, Maker: ABB, Model: ACS880-01-035A-7, Drive Output Filter, Maker: TCI, Model: V1K21A00, 21A ...more

INV 8001, Fresh from a closed shop this is not just the welder it's everything you need to get going including a portable cart, gun & ground cable and an assortment of studs. Inspect under power at our Savage, MN location. We can band to a pallet for LTL shipping., Pro Weld International CS-512 Stud Welder Inludes ...more

CPM Pellet Mill, 250 HP Motor, Includes: Mill, die and rollers.

Stewart Bolling 26" x 26" x 84" twin rubber mill. Recently removed from a rubber manufacturing facility that closed in July of 2023. This mill was rebuilt by Stewart Bolling in 2016. Both front rolls are triple pass "drilled" rolls. Rear rolls are cored. Direct connected and unitized on a 4-piece keyed base with ...more

One (1) Used Bolling #10 Rubber Mixer, 195 liter chamber, 350 lb batch, 2-wing tangential rotors, 600/300 HP, 1180/580 RPM, 4160 Volt Motor, Bullgear drive, 40/20 RPM rotor speed, pneumatic hopper, SSA dust seals, many spares, no base or slide door assembly available.

SKU: 139563, Condition: Used, Additional :, Power: 900HP.

Brand/Model: Oilwell 338 : Used same as National Oilwell 300TP, crankshaft only Applications: Well Service Pump, Mud Pump, Kill Truck Pump HP: 300 RPM: 225.

350HP 425A Galt Electric VFD, 480V, IP20, 350 Horsepower 425 Amps 480 Volt IP20 UL rated Three phase input and output Modbus communication protocol standard External keypad for easy programming 3-year manufacturer warranty.

MANUFACTURER: CaterpillarMODEL: D3406 B DITAENGINE MANUFACTURER: CaterpillarCONDITION: UsedHOURS: 4121HP: 400RPM: 1800Serial No: 6TB14183Reference: UC1944.

Front & Rear rolls: 22” dia. x 60” long Cored rolls Rotary joints Direct connected Alten 30:1 gear reducer, SN A-127 Modern 200HP/AC Motor, 230V/460V, 3PH, 1189 RPM, TEFC Allen-Bradley PowerFlex variable speed/frequency inverter drive Manual roll gap adjustment Slow-speed chain coupling Stainless steel ...more

550HP 650A Galt Electric VFD, 480V, IP20, 550 Horsepower 650 Amps 480 Volt IP20 UL rated Three phase input and output Modbus communication protocol standard External keypad for easy programming 3-year manufacturer warranty.

SKU: 107858, Model: ACS800-U1-0070-7, Condition: Used, S/N: 1130300774, Electrical :, Horsepower: 60 hp, Voltage: 600 volts, Phase: 3-phase, Amps: 73 amps, Dimensions: 25.00 (H) x 30.00 (W) x 65.00 (L) inches, Additional :, Frame Size: R6.

ELEKRIM MOTOR 3 SLH804A 460V 1680 RPM 1221474 MFD 2008 0.55KW 0.75 HP STOCK #1701 30 DAY RIGHT TO RETURN (FREE RETURNS DOMESTICALLY) AUTHENTICITY GUARANTEED! WE SOURCE OUR PRODUCTS FROM CLOSED LOCATIONS AND OTHER TRUSTED SOURCES.

FLEX EX CONTROLLER, 460 VOLT, SAFEGUARD LOAD SCALE, CHAIN PITCH / DIAMETET.9.5X28.6MM, 15/5 FPM LIFTING SPEED, PENDANT CONTROL.

SKU: 129114, Model: SVX025A1-5A4N1, Condition: Used - Like New, S/N: 13380736, Electrical :, Horsepower: 20 hp, Voltage: 600 volts, Phase: 3-phase, Amps: 34 amps, Cabinet Type: Eaton Freedom 2100 Series, Dimensions: 36.00 (H) x 20.00 (W) x 20.00 (L) inches, Additional :, **Fits 2100 MCC Frame, Input, Rating: 3-ph ...more

* HOUR METER PREVIOUSLY REPLACED, * REAR RIPPER,1 SHANK (NEW), *NO MIRRORS* NO ETHER AID*, 1985 CATERPILLAR D7G TRACK DOZER, 6404/10/24/24, AS IS / AS RECEIVED, BASIC GAUGE CLUSTER W/EMS, BATTERY 12V,50A SYS, TOOL BOX, BLADE,#7U DOZER WITH TILT, 12', CONSIGNMENT / GARBIN, KURT, D7G TRACK-TYPE TRACTORS, DISC ...more

Here We Have:, Conveyor Oven Model #C98TULEP480V45KW, The Conveyor oven is designed to operate at 150°C maximum temperature and includes the following special s:, • 4.5” thick insulated walls, ceiling and floor, • CRS exterior painted machine gray, • Aluminized interior, • Conveyor ...more