1 / 10
Click to zoom in
1 / 10
For Sale by Arlington Machinery
Surplus Record Dealer Since 1998
Location: Lake Zurich, IL
Contact Chris / Garrett
Phone Number: 847...> Show Phone Number 847-957-9731
Let the seller know you found their listing on Surplus Record!
Description
Description
- Refurbished 12" x 56" AEC Paddle Feed Granulator, Model WG1256, 30hp
- 5 Knife TwinShear Rotor, 2 Bed Knives
- Approximately 2000 lbs/hr Per Manufacturer (Material & Screen Dependent)
- Infeed Height: 53"
- Screen Size: 3/8"
- 30 HP Teco Westinghouse AC Motor, Cat. No.: N0304, S/N: P6105417096
- 460/3/60, 34.5A
- 1755 RPM
- 286T Frame, TEFC
- 3 HP Allen-Bradley PowerFlex40 AC VFD, Cat. No.: 22B-D6P0C104
- Input: 480/3/60, 7.5A, AC Voltage Range: 342-528
- Output: 3 Phase, 0-400 Hz, AC Voltage: 0-460, Continuous Amp: 6, 60 Sec Ovld Amps: 9
- Low Profile, Sound-Attenuated Infeed System Designed For Inline Thermoformer Discharge
- NEMA 12 Control Enclosure With Safety Interlocks
- Split Cutting Chamber For Easy Access & Cleanout
- Reinforced Heavy Duty Screen Cradle
- Starter Panel With Granulator & Blower Controls
- Spare Set of blades and spare 5/16" Screen
- S/N: 509000-1002
- Approximate Dimensions: 103” L x 70” W x 53" H , 5300 lbs
Get Your Price from Arlington Machinery!
Buyers Who Viewed This Listing Also Viewed:
12" x 28" x 11" Nelmor #G1220M1, Granulator, 4 Wheel, Cutler-Hammer Control
Seller: HGR24
Location: Euclid, OH
Mfr: Nelmor
Model: G1220M1
4 WHEEL, CUTLER-HAMMER CONTROL.
13" x 18" Conair #CB-1018, granulator, 15 HP, 3/8" screen, robot feed hopper, 2003
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Conair
Model: CB-1018
Year: 2003
Used Conair CB-1018 (2003) Granulator / Shredder for Sale. This unit has a 13″ x 18″ opening with a 10″ x 18″ feed throat and a 14″ x 18″ top hopper opening for robot feed. It runs an open rotor configuration with 3 rotor blades and 2 stationary knives, a 3/8″ screen, and a ...more
12" x 16" Whitaker/Granutec #TFG-1216, plastic granulator, 5-knife open rotor, 3/8" screen, 25 HP, 460/3/60
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Whitaker Brothers
Model: TFG 1216
Used 12" x 16" Whitaker/Granutec TFG 1216 Granulator, 25 HP 5 Knife Hardfaced Open Rotor 2 Bed Knives 53" Infeed Height 6.5" Diameter Discharge, 7" Clearance 3/8" Screen 25 HP Baldor Reliance AC Motor, Cat. FM2531T 460/3/60, 31A 1760 RPM 284T Frame With Hopper NEW Knives Installed Spare Screens & Knives Rated For ...more
Tria #900-NS-R, Pull Roll Granulator, 12.5" x 40" feed, 5-knife open rotor, 30 HP, 36" width, 480 V., 2004
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Model: 900-NS-R
Year: 2004
used tria model 900 ns-r pull roll granulator. 12.5" x 40" feed throat (1020mm x 320mm). five (5) knife open rotor with two (2) bed knives. rotor is belt driven by a 22 kw (30 hp). feed hopper with rear mounted 36" wide steel / serrated pull rolls. air actuated feed rolls are powered by a 1 kw (1.5 hp) a/c motor. 9" x ...more
12" x 10" Nelmor #G1012M1, Plastic Granulator, 480 V., 3-Ph., Reconditioned
Seller: Breakthru Surplus
Location: Waukesha, WI
Mfr: Nelmor
Model: G1012M1
G1012M1 Approx Opening Size: 12inch x 10inch Approx Overall Size: 66inch Tall x 58inch Long x 30inch Wide 20A 480V 3 Phase.
