Manufacturer: Whitaker Brothers
Model: TFG 1216
Feed Opening Width: 12.0
Long: 16.0
HP: 25.0
Stock # 22725A
1 / 10
Click to zoom in
1 / 10
For Sale by Arlington Machinery
Surplus Record Dealer Since 1998
Location: Lake Zurich, IL
Contact Chris / Garrett
Phone Number: 847...> Show Phone Number 847-957-9731
Let the seller know you found their listing on Surplus Record!
Description
Description
- Used 12" x 16" Whitaker/Granutec TFG 1216 Granulator, 25 HP
- 5 Knife Hardfaced Open Rotor
- 2 Bed Knives
- 53" Infeed Height
- 6.5" Diameter Discharge, 7" Clearance
- 3/8" Screen
- 25 HP Baldor Reliance AC Motor, Cat. FM2531T
- 460/3/60, 31A
- 1760 RPM
- 284T Frame
- With Hopper
- NEW Knives Installed
- Spare Screens & Knives
- Rated For Up To 450 LBS/HR
- Approx. Dimensions: 50" x 36" x 67" H, 2,000 LBS
Get Your Price from Arlington Machinery!
Buyers Who Viewed This Listing Also Viewed:
12" x 15" Nelmor #RG1215M1, Granulator, 3-Blade Rotor, (2) Bed Knives, 58" Infeed height, 0.5" Screen, 20 HP, 1760 RPM, 460 V
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Nelmor
Model: RG1215M1
Used 12" x 15" Nelmor Model RG1215M1 Granulator, 20 HP 3 Blade Open Rotor, 2 Bed Knives, Tangential Cutterhouse 58" Infeed Height 1/2" Screen Installed Rotor Speed: 587 RPM 20 HP Baldor AC Motor, Cat. M2334T, Frame: 256T 460/3/60, 25A Motor RPM 1760 Belt-Driven Rotor By Motor, 3:1 Rotor Reduction S/N: 871126249 Three ...more
12" x 17" Anderson Molds #812, plastic grinder/granulator, Carbon Steel construction, 3 HP
Seller: Machinery & Equipment Co
Location: San Dimas, CA
Mfr: Anderson Molds
Model: 812
Anderson Molds Plastic Grinder / Granulator, Model 812, carbon steel construction. Includes feed hopper measuring 28" x 18" x 36" with 12"x17" inlet, 8"x 12" throat, 5/16" diameter screen size openings, 9-Blade Cut, and bottom discharge. Driven by 3 HP, 208/230/460 Volt, 3/60 Hz, 1765 RPM motor. Serial number A577004. ...more
12" x 28" x 11" Nelmor #G1220M1, Granulator, 4 Wheel, Cutler-Hammer Control
Seller: HGR24
Location: Euclid, OH
Mfr: Nelmor
Model: G1220M1
4 WHEEL, CUTLER-HAMMER CONTROL.
13" x 18" Conair #CB-1018, granulator, 15 HP, 3/8" screen, robot feed hopper, 2003
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Conair
Model: CB-1018
Year: 2003
Used Conair CB-1018 (2003) Granulator / Shredder for Sale. This unit has a 13″ x 18″ opening with a 10″ x 18″ feed throat and a 14″ x 18″ top hopper opening for robot feed. It runs an open rotor configuration with 3 rotor blades and 2 stationary knives, a 3/8″ screen, and a ...more
Tria #900-NS-R, Pull Roll Granulator, 12.5" x 40" feed, 5-knife open rotor, 30 HP, 36" width, 480 V., 2004
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Model: 900-NS-R
Year: 2004
used tria model 900 ns-r pull roll granulator. 12.5" x 40" feed throat (1020mm x 320mm). five (5) knife open rotor with two (2) bed knives. rotor is belt driven by a 22 kw (30 hp). feed hopper with rear mounted 36" wide steel / serrated pull rolls. air actuated feed rolls are powered by a 1 kw (1.5 hp) a/c motor. 9" x ...more
