Buy or Sell Your 10 Foot Power Squaring Mechanical Shears

10 GA x 6' CINCINNATI MECHANICAL POWER SQUARING SHEAR MODEL 1006R… S/N″1118… NEW 1968 CAP. IN MILD STEEL. 6' x 10 GA BLADE LENGTH. 6'3" MAIN MOTOR. 7.5 HP STROKES / MINUTE. 65 RAKE TAPER / FOOT. 7/32" APPROX. WEIGHT. 9,500 LBS. : - FRONT OPERATED POWER BACK GAUGE- SQUARING ARM ...more

Pre Owned Cincinnati Model 500HS10 Hydraulic Power Squaring Shear, New 2013, Capacity (Mild Steel) 1/2”, Maximum Shearing Length 122 3/4”, Back Gauge Range (Front Operated Power, High Speed) 48” @ 60 I.P.M, Number of Hold Downs 13, Distance Under Hold Downs 1”, Strokes Per Minute 19-53, Main ...more

Pre Owned Cincinnati Model 2500 FSU Hydraulic Power Squaring Shear, Capacity (Mild Steel) 1/4”, Maximum Shearing Length 122 3/4”, Back Gauge Range (Front Operated Power, High Speed) 48” @ 120 I.P.M, Number of Hold Downs 15, Distance Under Hold Downs 1/2”, Strokes Per Minute 32-70, Main Motor ...more

10' x 5/32" HELLER HYDRAULIC POWER SQUARING SHEARMODEL HS-430… NEW 1988 Cutting Length. 120"Mild Steel. 5/32" (.156")Motor HP. 10Voltage. 440 :- Front Operated Power Back Gauge- Support Arms- Squaring Arm- Remote Foot Pedal.

Make: AccurShear, Model: 625012, Year: 2001, Machine Location: Tennessee, Capacity: 1/4″, Shear Length: 12’, Hold Down Type: Hydraulic, Number of Hold Downs: 19, Hold Down Tonnage: 19, Cycles Per Minute: 20 @ Full Stroke / 46 @ Short Stroke, Backgauge Stroke: 0 – 36”, Motor: 20 HP, Accurshear ...more

SERIAL. S65715, MODEL. IF-10-1/4 II, YEAR NEW. 1994, CAPACITY. 1/4" MILD STEEL, CAPACITY STAINLESS. 3/16", OVERALL LENGTH OF BLADES. 10-2-1/2", RAKE ADJUSTMENT. 3/16" TO 5/8 IPF, FRONT OPERATED POWER BACK GAUGE. 36", BACK GAUGE CONTROLLER. MPC 2100, STROKE LENGTH. VARIABLE, STROKES PER MINUTE FULL STROKE. 24, STROKES ...more

Make: Haco, Model: TS 3008, Year: 2005, Machine Location: Alberta, Canada, Model: TS 3008, Year: 2005, Cutting Capacity: 5/16″ (0.315″) Mild Steel, Blade Length: 10′ (120″), Type: Hydraulic Power Shear, Backgauge: Manual adjustable backgauge with scale, Frame: Heavy-duty welded steel ...more

SERIAL. P7-553, MODEL. 1096, CAPACITY. 10GA, LENGTH OF BLADES. 98", NUMBER OF HOLD DOWNS. 12, FRONT OPERATED BACK GAUGE. 24", STROKES PER MINUTE. 60, FLOOR TO TOP OF TABLE. 31", SQUARING ARM. 88", FRONT ARM SUPPORTS.2, 1 SHOT LUBE. YES, ELECTRIC FOOT TRIP. YES, MAIN MOTOR. 5 HORSEPOWER.

SERIAL. 16234, MODEL. 6212, LENGTH OF BED. 144", CAPACITY. 3/4", MANUAL BACKGAUGE, 20 STROKES PER MIN, Machine Type.Shears, Power Squaring (In) Manufacturer.CINCINNATI Model.6212 Year.1944 Condition.Good.

NEW 8" x 1/4" US INDUSTRIAL MODEL US825 HYDRAULIC SHEARBASE PRICE: PORSTANDARD EQUIPMENTSquaring ArmHigh Carbon, High Chrome Shear BladesBall Transfers On Each Table SegmentManual Quick Change Blade Gap AdjustmentSquaring Arm, 39.5" From Blade To EndStroke CounterFront Controlled Power Back GaugeBlade Guard, Micro ...more

Make: Standard, Model: AS250-10, Year: 1993, Machine Location: Florida, Capacity: 1/4″ x 10′, Available Shearing Force: 36 tons, Hold Downs: 11 cylinders, Hold-Down Force: 31 tons total, Blade Size: 1″ × 3″ × 124″, Rake Angle: 0.25″ per foot (3° rake), Ram Speed: ...more

SERIAL. P13-1153, MODEL. 1252, CAPACITY (MILD STEEL). 12 GAUGE, CUTTING LENGTH. 48" MAXIMUM, RAKE ANGLE. 5/16", NUMBER OF HOLD DOWNS. 8, BACK GAUGE RANGE. 36", STROKES PER MINUTE. 60, BACK GAUGE. REAR OPERATED MANUAL, CLUTCH. AIR TRIP MECHANICAL, SQUARING ARM. YES, FRONT ARM SUPPORTS. 1, ONE SHOT LUBE SYSTEM. YES ...more

DIACRO (USED) MODEL 818 SQUARING SHEAR, 1/8" MILD STEEL CAPACITY, 14 GAUGE STAINLESS STEEL, 8' CUTTING LENGTH, 25 SPM STROKES PER MINUTE, 9 HOLDOWNS, 13-3/4" THROAT DEPTH, - 3 - 40" FRONT SUPPORT ARMS, - 1 - 49" SQUARING ARM, - 25" MOTORIZED BACK GAUGE, - BLADE GAP ADJUSTMENT, - SCRAP CHUTE.

1/4"10'161325 HP60 SPM230V/3/6015' x 6' x 5' H18500 LBS.

12 GA x 4' PEXTO POWER SQUARING SHEAR MODEL 12-U-4F… S/N 596654… NEW 1959… CAP. MILD STEEL. 12 GA CAP. STAINLESS STEEL. 14 GA CUTTING LENGTH. 48" HEIGHT. 48" RAKE PER FOOT.375 BACK GAUGE RANGE. 24"FRONT GAUGE.″6" STROKES PER MINUTE. 62 MOTOR. 1,800 RPM / 5 HP / ...more

SERIAL. 47161, YEAR BUILT. 1992, MODEL. 1814G FSU III, "FSU" MODEL. FAST SET UP, CAPACITY. 3/16", LENGTH OF BLADES. 14'6", GAP. 4", FLOOR TO TABLE (PASSLINE). 32", FRONT SQUARING ARM. 144", FRONT ARM SHEET SUPPORTS. (2) 72", FRONT GUAGING. YES, CNC PROGRAMMABLE BACKGUAGE. 48", SINGLE,CONTINUOUS & JOGGING ...more

1/2" X 12' Hydraulic Power Shear with SC100T Touch Screen Control, with Robosoft Software, Motorized 40" Back Gauge, Swing Away Back Gauge, 40", Squaring Arm, 20" Plate Support, Ball Transfers and Cutting Line Illumination, Capacity Mild Steel: 1/2", Cutting Length: 147", Cutting Angle Adjustment: 0.5-3.0 Degrees ...more

Maximum cutting length 126" (3200mm), Maximum shearing capacity, mild steel 1/4" (6mm), Throat depth 5.9" (150mm), Number of strokes per minute 14, Backguage length 24" (600mm), Number of holddowns 14, Blade rake 1 degree 30 minutes, Main motor power 15 HP (11 KW), Electrics 230/3/60 or 460/3/60, Dimensions (L x W x ...more

SERIAL. 30281281, MODEL. MM61BC, YEAR NEW. 1981, PUNCHING CAPACITY. 49 TONS, MAXIMUM HOLE DIAMETER THROUGH. 13/16 X 3/4", MAXIMUM HOLE DIAMETER THROUGH. 1-1/16 X 1/2", DEPTH OF THROAT. 10", SHEAR CAPACITY. BELOW, ANGLES. 4" X 4" 3/8", ANGLES. 3" X 3" X 1/2", ROUNDS. 1-3/8", SQUARES. 1-1/4", FLATS. 1" X 6" THRU 3/16" X ...more

SERIAL.: 48699, MODEL.: 0612-SL, CAPACITY.: 3/8", LENGTH.: 144", SPM.: 45, POWER BACK GAUGE.: 48", FLOOR DIMENSIONS:, 16' LONG X 8' WIDE X 8' TALL., 34,500, Machine Type.Shears, Mechanical Manufacturer.LODGE & SHIPLEY Model.0612-SL Year.1971 Condition.Used.

Sheet Size: -------------------- 126 inch, Shearing Capacity: ------------- 1/4 inch Mild Steel @ 65,000 PSI, Shear Angle: ------------------- 1 Degree 30, No Load Strokes: --------------- 14, Throat Depth: ------------------ 5.5 inch, Adjustment Range of Back Gauge:- 0.75 inch - 36 inch, Hydraulic Oil Capacity: ...more

MODEL. 2H10 CENTURY CAPACITY. 10' X 1/4" MILD STEEL CAPACITY STAINLESS. 10' X 3/16" LENGTH OF BLADES. 10'6" HOLDDOWNS. 11X HYDRUALIC POWER BACKGAUGE. 36" FRONT OPERATED & READOUT SPEED. 16 SPM, FULL LENGTH CUTS ELECTRIC FOOT TRIP. YES ADJUSTABLE STROKE. YES CONTROL. INCH - SINGLE STROKE MOTOR. 15 HP.

SERIAL. P28-313, MODEL. 1225, YEAR. 1975, CAPACITY. 1/4" MILD STEEL, OVERALL LENGTH OF BLADES. 146", STROKES PER MINUTE. 55, FRONT OPERATED POWER BACKGAUGES. 36", RAKE. 3/8" PER FOOT, ELECTRIC FOOT PEDAL. YES, FRONT ARM SUPPORTS. (2) @ 24", LUBE SYSTEM. YES, MOTOR. 15 HORSEPOWER.

SERIAL. 50419, MODEL. 0612, CAPACITY. 3/8", OVERALL LENGTH OF BED. 12'4", THROAT. 12", POWER HOLD DOWNS. 12, STROKES PER MINUTE. 55, FRONT OPERATED POWER BACK GUAGE. 48", SQUARING ARM. YES, ELECTRIC FOOT PEDAL. YES, MOTOR. 20 HORSEPOWER, ** REQUIRES PIT APPROXIMATELY 8" **.

Sheet Size 157 inches Shearing Capacity 1/4 Mild Steel @ 65,000 PSI UTS / 1/8 Stainless Steel @ 95,000 PSI UTS / (Must consider option for Cr12MoV blades.) Shear Angle 1 30 feet No Load Strokes 10 Throat Depth 4.7 inches Adjustment Range of Back Gauge 0.75 - 36 Hydraulic Oil Capacity 66 Gal. Main Motor 15 HP, 220 or ...more

SERIAL. P25-127 MODEL. 825 CAPACITY MILD STEEL. 1/4" CAPACITY STAINLESS STEEL. 7 GA CUTTING LENGTH. 96" FRONT OPERATED POWER BACK GAUGE. 36" STROKES PER MINUTE. 55 RAKE. 3/8" PER FOOT NUMBER OF HOLD DOWNS. 14 CLEARANCE UNDER HOLDDOWNS. 3/4", AIR CLUTCH. YES, FOOT TRIP. YES, MOTOR, HORSEPOWER. 10.

1/4″ x 10 ft. cap. Mild steelOptions or Upgrades, 36’’ power backgauge.

Hydraulic Still Underpower, 24'1-1/4".

SERIAL.: P34-117, MODEL.: 650, YEAR NEW.: 1979, CAPACITY.:.500" MILD STEEL, LENGTH.: 72", # OF HYDRAULIC HOLD DOWNS.: 10, STROKES PER MINUTE.: 60, Machine Type.Shears, Mechanical Manufacturer.WYSONG Model.650 Year.1979 Condition.Used.

Make: Pines, Model: SVR 3, Year: 2008, Machine Location: Canada, Max Material Thickness: 0.5″, Max Cutting Length: 10′, Approx. Weight 20,000 lbs, Control: Delem DAC-360.

10' CUTTING WIDTH,.250" THICKNESS CAPACITY, 60 SPM, 133.07 KNIFE LENGTH, 39.37" FRONT OPERATED BACKGAUGE, RAKE ANGLE 1 DEGREE, 1990, 13 HOLD DOWNS, SQUARING ARM, FOOT PEDAL, LIGHT BEAM, EXIT CONVEYOR AVAILABLE *SEPERATE MACHINE*, 15 HP 230/460/60/3, 14'6" X 6'6" X 65" T APROX., 19,000 LBS APROX.

MODEL. 1010W, CAPACITY. 10 GAUGE, CAPACITY STAINLESS. 14 GAUGE, SHEARING LENGTH. 120", DISTANCE BETWEEN HOUSING. 120, STROKE PER MINUTE. 65, RAKE/TAPER PER FT.3/8, "NUMBER OF HOLD DOWNS.25", BACKGAUGE RANGE. 24", SQUARING ARM.YES, FRONT ARM SUPORTS. 2, ELECTRIC FOOT PEDAL. YES, MOTOR HORSEPOWER. 5.

Stock #: 211240003, Location: IL, Brand: Cincinnati, Model: 500 x 10' 1/2 Hydraulic Shear W/ Back Gauge, Serial #: 48632, Year: 1995, Cut Capacity: 1/2", Max Cutting Length: 10', Back Gauge Range: 48", Number of Hold Downs: 13, Additional Info, Can be inspected upon request, Stock #: 211240003Location: ...more

-BACK GAUGE 48"- CINCINNATI INC model 2500 CNC & Metalworking Equipment, used and ready for your industrial needs. Ideal for those seeking reliable capabilities from a trusted manufacturer in the field., CINCINNATI INC 2500X10.

Capacity (to Mild Steel) 10 ga." x 10' Capacity (to Stainless Steel) 12 ga." x 10' Shearing Tons Available 36 Shipping Height 95 inches Width 152 inches Depth 87 inches Number of Hold Down Cyclinders 11 Bore of Hold Down Cylinders 2 inches Hold Down Tons of Force 20 Blade Size 1" x 3" Weight 18000 pounds ...more

Mubea KBL 71-5 Mechanical Ironworker #7463 #1, Capacity: 71 tons, Throat Depth: 20", Punch Capacity: 1-1/16 thru 3/4 mild steel, Angle Shear: 5" x 5" x 1/2", Plate Shear: 8" x 3/4", Round Bar: 2", Square Bar: 1-3/4", Notcher: 2-1/8" x 3-1/8" x 9/16", Main Motor: 5 HP, 220/440V, 3 PH, Dimensions: 60" x 26" x 66"H ...more

Capacity, Mild Steel ¼”, Capacity, Stainless Steel 10 GA, Cutting Length 122”, Angle Adjustment 1-3°, Number of Plate Hold Downs 18, Number of Strokes / min. 10-25, Length of Squaring Arm 40”, Backguage Range 32”, Working Height 31”, Motor 15 HP, Dimensions 157” x ...more

Capacity: 3/8" Length: 10’ Motor: 30 HP Power Back Gauge: 36” Voltage: 230/460 Approximate Dimensions: 149” X 89” X 91” Approximate Weight: 28,000 LBS, INCLUDES: Accushear SC-2 CNC Controller with Pre-Select Positions, Sequential Single Step, Go-To-Positions Function, Programmable ...more

, – Motor & control CSA approved, – Finger guard fixed, – Spring loaded hold down, – Remote foot switch, MODEL: 1.6/1250, SERIAL NO.: 787830483, CUTTING CAPACITY – Mild Steel: 50” x 16 ga, SHEAR ANGLE: 2.5 degrees, BACK GAUGE RANGE: 25”, hand crank, SPEED – ...more

Pre Owned Cincinnati Century 2H10 Hydraulic Shear, Capacity (Mild Steel) 1/4”, Maximum Shearing Length 120, Rake Taper at Max Rake 3/8” Per Foot, Back Gage Range (Increased Speed) 36”, Distance Under Hold Downs 1/2”, Strokes Per Minute 14, Motor Horsepower 15, Blade Size 1” X 3” ...more

SERIAL. S10497, MODEL. 375R16, CAPACITY MILD STEEL. 3/8", CAPACITY MILD STEEL AT MAXIMUM RAKE. 1/2", DISTANCE BETWEEN HOUSING. 16'3", DEPTH OF THROAT. 18", FRONT OPERATED POWER BACK GAUGES. 48", ADJUSTABLE RAKE (AUTOMATIC). 5/16", STROKES PER MINUTE STANDARD SPEED. 12 @ 16', STROKES PER MINUTE HIGH SPEED. 30 @ ...more

, 24” rear operated manual backgauge, Electric foot pedal, Manufacturer Roper Whitney 52" x 12ga Mechanical Shear Model 5212 Condition Used Stock Number 10694.

MODEL.: 6A, TONNAGE.: 105 TON-60,000 TENSILE MATERIAL, MAX DIA. THRU THICKNESS.: 1-5/16" - 1" THICK, PUNCH THROAT DEPTH.: 25", SHEARING:, FLATS.: 1/2" X 21", 3/4" X 10-1/2", ROUNDS.: 2-1/4", SQUARES.: 2", ANGLES.: 90 DEGREE, 6" X 6" X 1/2", ANGLES.: 45 DEGREE, 5" X 5" X 3/8", SHEAR END COPING:, SQUARE NOTCH.: 2-1/2" X ...more

SERIAL. 1140-8-79, MODEL. MM 90C, YEAR OF MANUFACTURE. 1979, CAPACITY. 86 TON, PUNCHING. 1-1/16" THROUGH 1" MILD STEEL, FLAT BAR SHEAR. 6" X 1" TO 22" X 3/16", SQUARE SHEAR. 1-1/4", ROUND SHEAR. 1-3/8", ANGLE SHEAR. 4" X 4" X 3/8" TO 3" X 3" X 1/2", COPPER. 3" X 3" X 3/8" FLAT.

(1) Used 10 x 1/4 Amada Model M3060 Mechanical Power Squaring Shear w/ FOPPBG, s/n: 30601111, Max Thickness Capacity: 0.235, Max Cutting Length: 120.8, Blade Length: 133, Distance Between Housings: 124, Gap Depth: 11.81, Rake Angle: 128, Strokes Per Minute: 60 SPM, Front squaring arm, (2) 32 front extension arms, (13) ...more