AI-ranked results for gang - closest matches first
Kia #KIT30A, Turning Center, 18.9" swing, 6" chuck, 1.5" bar, Fanuc 0-T, S/N 30980
Smith Machinery Co | Ames, IA
Category: CNC Lathes and Turning Centers
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Kia
Model: KIT30A
Max Swing Over Bed 18.9 inches Max Swing Over Cross Slide 6.69 inches Max Part Diameter 5.9 inches Max Part Length 7.9 inches Standard Chuck Size 6 inches Cross Travel (X-Axis) 9.8 inches Longitudinal Travel (Z-Axis) 15.7 inches Rapid Traverse Rate (X-Axis) 1,181 IPM Rapid Traverse Rate (Y-Axis) 1,181 IPM Type of Tool ...more
JUST ADDED!
Miyano #BNA-42GTY, CNC Multi-Axis Turning Center, 1.65" machining diameter, 4.33" machining length, 3.74" X, 10.24" Y, 4.33" Z, 10 HP, 6000 RPM, Mitsubishi 730 CNC, 2018
CNC Exchange div. Gray Machinery Co. | Prospect Heights, IL
Category: CNC Lathes and Turning Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Miyano
Model: BNA-42GTY
Year: 2018
42MM MIYANO BNA-42GTY CNC MULTI AXIS TURNING CENTER, NEW 2018, MAIN AND SUB SPINDLE, TURRET WITH LIVE TOOLING AND Y-AXIS, REAR GANG TOOL BLOCK, HIGH PRESSURE, IEMCA BAR FEEDER, ITEM BNA-42GTY, Machining Capacity, Max. Machining Diameter (SP1/SP2) 42mm / 42mm, Max. Machining Length 110mm, Spindle Speed (SP1/SP2) 6,000 ...more
Leadwell #T-5, gang style turning center, 1.375" bore, Fanuc OI-Mate-TC, automatic parts load/unload, 2005
McKean Machinery Sales Inc | Cleveland, OH
Category: CNC Lathes and Turning Centers
Seller: McKean Machinery Sales Inc
Location: Cleveland, OH
Mfr: Leadwell
Model: T-5
Year: 2005
Hardinge #Conquest-GT-27SP, CNC Lathe, Super Precision Gang Tool, w/ additional tooling
Universal Automatics | Richfield, OH
Category: CNC Lathes and Turning Centers
Seller: Universal Automatics
Location: Richfield, OH
Mfr: Hardinge
Model: CONQUEST-GT-27SP
Year: 2000
HARDINGE CONQUEST GT-27SP Super Precision Gang Tool CNC Lathe (used) New 2000 w/tons of tooling, tool holders, top plates, Filter Mist mist collector, High pressure coolant pump, air operated live tool, collets, extras and spare from another machine, RAN OIL!, 2000 HARDINGE CONQUEST GT27SP, Swing. 11.76", Bar ...more
Hardinge #Conquest-GT27SP, CNC gang tool lathe, GE Fanuc 18i, 11.7" swing, 5 HP, 6000 RPM
Platinum Asset Services | Scarborough, ON
Category: CNC Lathes and Turning Centers
Seller: Platinum Asset Services
Location: Scarborough, ON
Mfr: Hardinge
Model: CONQUEST-GT27SP
HARDINGE, CONQUEST GT27SP, CNC, GANG TOOL, LATHE, GE FANUC ,18i, CNC CONTROL, 5C SPINDLE, 230/3/60, 35 KVA, S/N GTL-153-18 WITH LOADER, HARDINGE CONQUEST GT27SP, Swing. 11.76", Power. 5 hp, Max RPM. 6,000 RPM.
Get email updates for newly added CNC Lathes and Turning Centers
A CNC lathe machine, or CNC turning machine, is a machine tool that rotates a bar of material to precisely cut, shape, and finish materials such as metal, wood, and plastic. The main spindle rotates the material, while the cutting tool can move along multiple axes.
OmniTurn #GT-75-Series-II, CNC gang lathe, 1-1/16" bar, 2018
Generation Machine Tools | Sarasota, FL
Category: CNC Lathes and Turning Centers
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Omniturn
Model: GT-75-SERIES-II
Year: 2018
OMNITURN GT-75 Series II CNC Gang Lathe 2018’ #7836, OMNITURN GT-75 Series II CNC Gang Lathe 2018’ #7836, Reference # 7836, Model # GT-75 Series II, Serial # 4951G4P, Year of manufacture- 2018’, Maximum turning diameter- 6”, X-axis travel- 12’’, Z-axis travel- 9’’, Rapid ...more
AutoMateCNC #Star-SL6, Slant-Bed CNC Lathe, 18.9" swing, 2" bar, 6" chuck, 18" centers, 9.84" turn diameter, 7.5 HP, 3000 RPM, 2018
Revelation Machinery | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Automatecnc
Model: STAR-SL6
Year: 2018
Make: AutoMate CNC, Model: Star SL6, Year: 2018, Machine Location: Wisconsin, X-Travel: 7.87″, Z-Travel: 9.84″, Distance Between Centers: 18″, Max Swing Over Bed: 18.90″, Max Cutting / Turning Diameter: 9.84″, Rapid Traverse: 787.44/984.24 IPM, Spindle, Bar Capacity: 2.00″, Chuck ...more
OmniTurn #GT-75-Series-III, CNC gang lathe, 1-1/16" bar, 2023
Generation Machine Tools | Sarasota, FL
Category: CNC Lathes and Turning Centers
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Omniturn
Model: GT-75-SERIES-III
Year: 2023
OMNITURN GT-75 Series III CNC Gang Lathe 2023’ C axis #7847, OMNITURN GT-75 Series III CNC Gang Lathe 2023’ C axis #7847, Reference # 7847, Model # GT-75 Series III, Year of manufacture- 2023’, Maximum turning diameter- 6”, X-axis travel- 12’’, Z-axis travel- 9’’, Rapid ...more
SNK Prodigy #GT-27, gang tool, GE Fanuc Oi Mate-TB, 9.4" swing, 4" chuck, 1" bar, 5C, 2006
Strand Industrial Machinery | Hamel, MN
Category: CNC Lathes and Turning Centers
Seller: Strand Industrial Machinery
Location: Hamel, MN
Mfr: Snk
Model: GT-27
Year: 2006
Manufacturer: SNK Model: GT-27 Year: 2006 Stock #: 153805 Status: For Sale Swing 9.4" X Travel 12 in Z Travel 6.5 in Rapid Traverse Rate X/Z 800 ipm SPINDLE BORE 1.0625" SPINDLE NOSE 5C Machining Length 5.7" Chuck Size 4" Bar Capacity 1.0625" Max RPM 6,000 RPM SPINDLE SPEEDS Variable 100 to 6,000 RPM Live Tooling No ...more
Cubic Machinery #GT-Force-32, CNC gang type lathe, 5" chuck, 1" bar, A2-4, Fanuc 0i-TF, 2019
Machnet | Santa Monica, CA
Category: CNC Lathes and Turning Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Cubic Machinery
Model: GT-FORCE-32
Year: 2019
2019 Cubic GT Force-32 CNC Gang Tool Lathe - under 1500 hours!, Cubic GT Force-32 CNC Gang Type Lathe, New: 2019, Travels:, X-Axis: 8.27", Z-Axis: 7.87", Spindle Speed: 6,000 RPM, Spindle Bore: 1.25", Max Bar Size: 1.0625", Spindle Nose: A2-4, Max Chuck Size: 5.3" or 5C Collet Nose, Feed Rates: 400 IPM, Rapid Traverse ...more
Leadwell #T-5, CNC Gang Slide Lathe, 12.9" swing, 6" chuck, 1.6" bar, 5.35" turn diameter, 45-4500 RPM
Adams Machinery | Libertyville, IL
Category: CNC Lathes and Turning Centers
Seller: Adams Machinery
Location: Libertyville, IL
Mfr: Leadwell
Model: T-5
Year: 2011
, Max Swing, 12.99”, Max Turning Diameter, 5.35”, Max Turning Length, 5.35”, Bar Capacity, 1.6”, X-axis, 9”, Y-axis, 9”, Spindle Speeds, 45-4500 RPM, Chuck Size, 6” (Currently Collet Setup), Spindle Nose, A2-6, Spindle Motor, 10 HP, No. of Tools, 6, Electrical Requirements ...more
Yama Seiki #GTW-1500Y, multi-axis CNC turning center, Fanuc 32i, turret / gang tooling, 2016
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Yama Seiki
Model: GTW-1500Y
Year: 2016
Yama Seiki GTW1500Y Turret / Gang Tooling Multi-Axis CNC Turning Center, (subject to buyer verification):, Capacity, Max. Turning Diameter Live Tooling Turret + Y-axis : 9.84”, Standard Turning Diameter Live Tooling Turret : 9.05”, Max. Turning Length 8.26”, Main Spindle, Bar Capacity 2” (Main ...more
JUST ADDED!
Leadwell #T5, CNC gang slide lathe, Fanuc 0i Mate TD controls, 12.9" swing, 1.6" bar, 6" chuck, 2005
Adams Machinery | Libertyville, IL
Category: CNC Lathes and Turning Centers
Seller: Adams Machinery
Location: Libertyville, IL
Mfr: Leadwell
Model: T-5
Year: 2005
Max Swing 12.99” Max Turning Diameter 5.35” Max Turning Length 5.35” Bar Capacity 1.6” X-axis 9” Y-axis 9” Spindle Speeds 45-4500 RPM Chuck Size 6” (Currently Collet Setup) Spindle Nose A2-6 Spindle Motor 10 HP No. of Tools 6 Electrical Requirements 230V/3Ph/60Hz (10 KVA) ...more
Miyano #BNA-42GTY, gang & turret CNC turning center, 10-Axis, Mitsubishi M730 VS Control, sliding headstock & LFV, 2022
Universal Automatics | Richfield, OH
Category: CNC Lathes and Turning Centers
Seller: Universal Automatics
Location: Richfield, OH
Mfr: Miyano
Model: BNA-42GTY
Year: 2022
Stock #: 508028190 | Year: 2022 | MIYANO BNA-42GTY LFV | Used - Excellent, Location:, United States, 2022 MIYANO BNA-42GTY 10-Axis CNC Turning Center with Low Frequency Vibration Technology - LFV ON! Gang & Turret tool configuration (i.e. 42mm Citizen M32), Chucker capability, Miyano M-542 (Edge Patriot 338) ...more
Amada Wasino #G05, CNC Gang Lathe, 4 chuck, 1.10 spindle bore, 8000 RPM Gantry Loader, Mist Buster, Fanuc S-21i-TB, 2012
Revelation Machinery | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Amada
Model: G05
Year: 2012
Make: Amada, Model: Wasino G05, Year: 2012, Machine Location: New York, Chuck Size: 4″, Spindle Nose: 3.93″, Spindle Bore: 1.10″, Spindle Speed: 8,000 RPM, Spindle Motor: 5 HP, Spindle Center Height: 37.4″, X Axis Travel: 8.66″, Z Axis Travel: 8.66″, X Axis Rapid Traverse: 590 IPM ...more
Omniturn #GT75-Series-III, CNC Gang Lathe, 6" diameter, 4k RPM, 5 HP
Wheeler Machinery Sales | Pomona, CA
Category: CNC Lathes and Turning Centers
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Omniturn
Model: GT75-SERIES-III
OMNITURN GT75 SERIES III CNC GANG LATHE #8078 #2, Capacities, Workholding: 5C Collet, Max. Cutting Diameter: 6, Max. Bar Diameter: 1.06, Tooling Plate: 6 x 14 with 3/8 T-Slot, Tooling height center of spindle to tool plate:.5, Spindle, Max Speed: 4,000 rpm, Max Rating: 5 hp, Spindle Nose: 5C w/4 camlock, Drawtube ...more
Featured
Omniturn #GT-75, CNC lathe, 12" X, 9" Z
TBC | Dade City, FL
Category: CNC Lathes and Turning Centers
Seller: TBC
Location: Dade City, FL
Mfr: Omniturn
Model: GT-75
X axis travel 12" Z axis travel 9" Center height 3/8", 1/2" or 5/8" Tooling plate 14" x 6" Tooling type Gang type Axis repeatability.00005" Axis resolution.00005" Axis accuracy.0001" Control OmniTurn Rapid travel 300 ipm Feed rate Slowest.00005"/rev Fastest 300ipm, Threading Finest 240/inch Coursest.5"/rev, Axis ...more
Okuma #Macturn-250-2S/1000, 5" Axis CNC Turning Center, 21.7" swing, 39.4" L max, 5000 RPM, 30/20 HP, 3.15" Bore, Live Mill, tailstock, Chip Conv., 2005
Aucto | San Francisco, CA
Category: CNC Lathes and Turning Centers
Seller: Aucto
Location: Louisville, KY
Mfr: Okuma
Model: MACTURN-250-2S/1000
Year: 2005
THE OKUMA MACTURN 250-2S/1000 IS A BIG-BORE 5-AXIS CNC TURNING CENTER LIVE MILLING CAPABILITIES AND AN OSP-P100L CNC CONTROL. IT S A 30-POSITION AUTOMATIC TOOL CHANGER AND A 5-AXIS MACHINE DESIGN, INCLUDING 360-DEGREE C-AXIS ROTATION (0.001-DEGREE CONTROL ANGLE) AND A 210-DEGREE B-AXIS ANGLE (1-DEGREE INDEXING)., KEY ...more
Republic-Lagun #American-Turnmaster-Power-Five, CNC Lathe, 60.1" swing, 80" between centers, 60" 4-jaw chuck, 6.02" hole thru spindle, 30 HP, 700 RPM, Newall Smart digital read out, tailstock, 2015
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Republic-Lagun
Model: AMERICAN TURNMASTER POWER FIVE
Year: 2015
Used CNC Lathe: American Turnmaster Power Five, used. s 6.02" spindle hole, 80" between centers, 30 HP motor, and Newall Smart Digital Readouts. Includes a 60" 4-jaw chuck, live center, and extra tool post., Hole Thru Spindle 6.02", Swing Over Bed Ways, Actual 60.125", Swing Thru Gap 80.25", Swing Over Cross-Slide ...more
JUST ADDED!
Omniturn #GT-75, CNC Lathe, 1" Bar, 6" Turning diameter, 300 IPM Rapid Traverse, 4000 RPM, 2018
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Omniturn
Model: GT-75
Year: 2018
CNC Lathe, used, with 82 machine hours from medical parts manufacturing. s include X/Z travel, 300 I.P.M. rapid traverse, spindle speed 10-4000 RPM, parts conveyor, work light, and more., Maximum turning diameter- 6, X-axis travel- 12, Z-axis travel- 9, Rapid traverse rate- 300 I.P.M., Tooling height-, Tooling plate ...more
Okuma #MacTurn-250-2S/1000 Big Bore 5" Axis CNC turning center w/live milling, OSP-P100L Control, 2005
Mohawk Machinery Inc | Cincinnati, OH
Category: CNC Lathes and Turning Centers
Seller: Mohawk Machinery Inc
Location: CINCINNATI, OH
Mfr: Okuma
Model: MACTURN-250-2S/1000
Year: 2005
OKUMA "MACTURN 250-2S/1000" BIG-BORE 5-AXIS, CNC TURNING CENTER W/LIVE MILLING, New 2005, Serial No 116135, Model Macturn 250-2S/1000, OKUMA "MACTURN 250-2S/1000" BIG-BORE 5-AXIS, CNC TURNING CENTER W/LIVE MILLING, New 2005, Serial No 116135, Model Macturn 250-2S/1000, OSP-P100L CNC Control w/CRT, 44-Position ...more
Okuma #MacTurn-250BB-2S/1000, CNC turning center, 21.6" swing, 2.7" bar, 3.15" bore, A2-8, 30 ATC, OSP-P100L, live mill, 2005
Machinery Central | Louisville, KY
Category: CNC Lathes and Turning Centers
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Okuma
Model: MACTURN-250BB-2S/1000
Year: 2005
OKUMA "MACTURN 250-2S/1000" BIG-BORE 5-AXIS, CNC TURNING CENTER W/LIVE MILLING, New 2005, Serial No 116135, Model Macturn 250-2S/1000, OSP-P100L CNC Control w/CRT, 30-Position Automatic Tool Changer, 5-Axis Machine Design, 3.15" Spindle Bore - A2-8 Spindle Nose, Collet-Type Chuck w/Kitagawa Hydraulic Actuator ...more
JUST ADDED!
Omniturn #GT-75, CNC Lathe, 1" Bar, 6" Turning diameter, 6" x 14" Tooling Plate, 10-4000 RPM, 485 Machines hours, 2023
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Omniturn
Model: GT-75
Year: 2023
CNC Lathe, used, offers maximum 6 turning diameter, 12" X, 9" Z travel. s include C axis, 5-C collet, 4000 RPM spindle, dual palm start, virtual factory training, and self-contained flood coolant system. 485 machine hours., Maximum turning diameter- 6, X-axis travel- 12, Z-axis travel- 9, Rapid traverse rate- 300 ...more
Haas #TL-25BB, CNC Lathe, 30" swing over apron, 14.5" swing over cross slide, 39" between centers, 16" max. cutting diameter, 34" max. cutting length, 40 HP, 2400 RPM, 5.25" sub spindle, 2007
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: TL-25BB
Year: 2007
HAAS TL-25BB CNC Lathe, 2007 model, used. s Haas CNC Control, sub-spindle, live tooling, 4" big bore drive system, collet chuck, part catcher, 40 HP vector drive, tool presetter, 12-position turret, coolant system, and chip conveyor., Spindle Bar Capacity, Maximum 4", Sub-Spindle Bar Capacity, Maximum 1.18", Swing ...more
JUST ADDED!
King Rich #KR-L480, CNC teach lathe, 18.6" swing, 10" chuck, 3-jaw, 3.15" bore, 49.2" centers, D1-8, 8 turret, 15-2500 RPM, Fagor 8040-T, 2006
MD Equipment Services LLC | Crooked River, OR
Category: CNC Lathes and Turning Centers
Seller: MD Equipment Services LLC
Location: Crooked River, OR
Mfr: King
Model: KR-L480
Year: 2006
Ganesh CNC Teach Lathe, OEM: King Rich Industries Co. Ltd. (Taiwan), Model: KR-L480 (Ganesh GT-2050 CNC), DOM: March 2006, Electrics: 220 Volt, 3 Phase, 60 Cycle, Spindle Motor: 10HP, s & :, …CNC Controls: Fagor 8040-T, …Spindle :, ……Bore: 3.15”, ……Nose: D1-8 ...more
Okuma #Multus-B400W, multi-tasking CNC lathe, OSP-P200L, 27.9" swing, 15"/12" chuck, 2007
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Okuma
Model: MULTUS-B400W
Year: 2007
Okuma Multus B400W Multi-Tasking CNC LathesMaximum swing 27.9″”Cutting length 60.00″Max. Turning Length 60″C-Axis Control 360 Degrees at 0.001B Axis Indexing Angle 225 Degree at 0.001″Main Spindle Speed Range 2800 RPMMain Spindle HP 40/30 HPMain Spindle Nose A2-11Main Spindle Bore ...more
JUST ADDED!
Poreba #TRP-93x6M, CNC lathe, 36.8" swing, 4-jaw chuck, 3.5" bore, 236" centers, inch/metric, taper attachment, 3 Steady Rest, 1998
Machinery Marketing International | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Poreba
Model: TRP-93X6M
Year: 1998
236" Distance between Centers| 3.5" through spindle| 4 Jaw Chuck, Poreba TRP 93 x 6M CNC Lathe (1998) is a heavy-duty horizontal engine lathe built for machining large, heavy workpieces with precision and power. Designed for both roughing and finishing operations, it is ideal for turning long shafts, rolls, and ...more
Okuma #LB-3000EX-LI/800BB-MYM, CNC Turning Center, 2011
Universal Automatics | Richfield, OH
Category: CNC Lathes and Turning Centers
Seller: Universal Automatics
Location: Richfield, OH
Mfr: Okuma
Model: LB-3000EX-LI/800BB-MYM
Year: 2011
SWING OVER BED: 22.83", SWING OVER SADDLE: 18.5", MAX. TURNING DIAMETER: 13.39", MAX. TURNING LENGTH: 37.00, X-AXIS TRAVEL: 10.24", Y-AXIS TRAVEL: 4.72", Z-AXIS TRAVEL: 39", SPINDLE NOSE: A2-8, SPINDLE BORE 3.15, SPINDLE RANGE: 42-4,200 RPM, MILLING SPEED RANGE: 45 - 6,000 RPM, MAIN MOTOR: 30 HP, LIVE MILLING MOTOR: ...more
Southwestern Industries #Trak-TRL-1745P, CNC Lathe, 45" between housing, 17-11/16" swing, 10-15/32" swing over cross slide, 40-2200 RPM, 7.5 HP, ProtoTrak LX2 Control, tailstock, 1997
Machinery Works Inc | Belgium, WI
Category: CNC Lathes and Turning Centers
Seller: Machinery Works Inc
Location: Belgium, WI
Mfr: Southwestern Industries
Model: TRAK-TRL-1745P
Year: 1997
Mighty Viper #VT-17XL, Horizontal Turning Machines, 18.9" swing, 1.7" Bar, 11.2"/16.5" turn diameter, 14.6" turn length, 15/20 HP, 6000/5000 RPM, 10/12 Tools
Relco Industries | Southampton, PA
Category: CNC Lathes and Turning Centers
Seller: Relco Industries
Location: Southampton, PA
Mfr: Mighty Viper
Model: VT-17XL
PERFORMANCE, Machine Model 15L 17L, Swing Over Z Way 18.9 (480), Turning Diameter Max. 11.2 (280) 16.5 (420), Turning Length Max. 14.6 (370), X-Travel 6.3+0.6 (160+15) 8.8+0.4 (225+10), Z-Travel 18.5 (470), Spindle Nose Type A2-5 A2-6, Spindle Thru Hole 2.0 (51) 2.4 (61), Bar Capacity 1.7 (43) 2.0 (51), Spindle Speed ...more
Clausing #CNC1440PT, cnc lathe, 14" swing, 6.7" swing over cross slide, 40" centers, 1.5" bore, 2000 RPM, 5 HP, tailstock, Acu-Rite Control, 2021
Machinery Central | Louisville, KY
Category: CNC Lathes and Turning Centers
Seller: Machinery Central
Location: Louisville, KY
Mfr: Clausing
Model: CNC1440PT
Year: 2021
, Clausing CNC1440PT Lathe, 2021 model. Swing: 14", Machining Length: 40", Power: 5 HP, Max RPM: 2000. s Acu-Rite TurnPwr control with 12.1 LED, 1.4 GHz Dual Core, DRO mode, and various programming cyclic operations., Spec Sheet:, SWING OVER BED. 14", SWING OVER CROSS SLIDE. 6.7", HEIGHT OF CENTER. 6.8", DISTANCE ...more
DMG, Gildemeister #CTX-620, CNC turning center, 26.4" swing, 15" chuck, Siemens 840D Control
Mohawk Machinery Inc | Cincinnati, OH
Category: CNC Lathes and Turning Centers
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Dmg
Model: CTX-620
Year: 2005
CTX620X1000 DMG GILDEMEISTER CNC TURNING CENTER, W/Y-AXIS & LIVE MILLING, New 2005, Serial No 80409390300, Model CTX620X1000, CTX620X1000 DMG GILDEMEISTER CNC TURNING CENTER, W/Y-AXIS & LIVE MILLING, New 2005, Serial No 80409390300, Model CTX620X1000, Siemens 840D CNC Control, 12(+4) Position VDI 50 Turret ...more
DMG, Gildemeister #CTX620x1000, CNC turning center, 31.5" swing, 15" chuck, 3-jaw, 4.7" bar, 23.6" dia., 42.52" lgth, Siemens 840D, Y-Axis, live mill, tailstock, SMW-Autoblok BHD hydraulic self-centering Steady Rest, 2005
Machinery Central | Louisville, KY
Category: CNC Lathes and Turning Centers
Seller: Machinery Central
Location: Louisville, KY
Mfr: Dmg
Model: CTX620X1000
Year: 2005
, DMG GILDEMEISTER CTX620X1000 CNC Turning Center with Y-Axis & Live Milling from 2005. s Siemens 840D control, 12(+4) turret, tailstock, 15" chuck, steady rest, and coolant systems. Ideal for precision machining. Used condition., Spec Sheet:, CTX620X1000 DMG GILDEMEISTER CNC TURNING CENTER, W/Y-AXIS & LIVE ...more
Romi #G550M, CNC turning center with milling, Siemens 828D Control, 27" swing, BMT-75 tool holder, 2022
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Romi
Model: G550M
Year: 2022
Romi G550M CNC Turning Center with Milling – 2022 (subject to buyer verification):CapacitySwing over Z axis cover: 27″Max. cutting diameter: 21″Max. cutting length: 51″Travel (X axis): 11″Travel (Z axis): 53″HeadstockSpindle nose: A2-11″Spindle thru-hole: 5.6″Direct ...more
Dean Smith & Grace #4432PX156, Cnc Hollow Spindle Lathe, 44" swing, 156" between housing, 32" swing over cross slide, 15" bore, 50 HP, tailstock, Steady Rest, Chip Conv., 2007
Aucto | San Francisco, CA
Category: CNC Lathes and Turning Centers
Seller: Aucto
Location: Louisville, KY
Mfr: Dean Smith & Grace
Model: 4432PX156
Year: 2007
THE 2007 DEAN SMITH & GRACE 4432P X 156 IS A 2-AXIS CNC HOLLOW SPINDLE LATHE CONTROLLED BY A HEIDENHAIN 4110 MANUAL PLUS CNC SYSTEM. THIS MACHINE OFFERS A SUBSTANTIAL MAXIMUM SWING OF 44 INCHES AND A MACHINING LENGTH (DISTANCE BETWEEN CENTERS) OF 156 INCHES. THE MAXIMUM SWING OVER THE CROSS SLIDE, OR TURNING ...more
Mighty Viper #VT-36, Horizontal Turning Machines, 31.5" swing, 4.5"/6.3" Bar, 24.8" turn diameter, 37"-116" turn length, 35/50 HP, 2100/1400 RPM, 12 Tools
Relco Industries | Southampton, PA
Category: CNC Lathes and Turning Centers
Seller: Relco Industries
Location: Southampton, PA
Mfr: Mighty Viper
Model: VT-36
36B~36CL VT-Series provides a wide boring diameter, up to 7-inches., Swing Over Bed 31.5 (800), Turning Diameter Max. 24.8 (630), Turning Length Max. 37~116 (950~2950), X-Travel 12+1.18 (320+30), Z-Travel 39 ~117 (990~2990), Spindle Nose A2-11 / A2-15, Thru Bar Capacity 4.5 / 6.3 (115 /160), Spindle Thru Hole 5.16 / ...more
Southwestern Industries Prototrak #TRL-1440S, CNC lathe, 14" swing, 6" 6-jaw chuck, 1.575" bore, 40" centers, 35-2400 RPM, Prototrak SL 2 Axis, tooling, 2003
Global Machine Brokers LLC | Guilford, CT
Category: CNC Lathes and Turning Centers
Seller: Global Machine Brokers LLC
Location: Guilford, CT
Mfr: Southwestern Industries
Model: TRL-1440S
Year: 2003
2003 PROTOTRAK TRL-1440S.
JUST ADDED!
Prototrak #1630, CNC lathe, 2014
Star Equipment Co., Inc. | Utica, MI
Category: CNC Lathes and Turning Centers
Seller: Star Equipment Co., Inc.
Location: Utica, MI
Mfr: Prototrak
Model: 1630
Year: 2014
Swing Over Bed: 16", Distance Between Centers: 30", Spindle Speed Range: 150 2500 RPM, Control: ProtoTRAK SLX CNC Pendant, Spindle Nose: D1-4 (typical verify), Electrical: 230 - 3-Phase (machine), 115V Control, Year: 2014, Manufacturer: Southwestern Industries (TRAK), S, ProtoTRAK SLX intuitive conversational CNC ...more
Gildemeister #CTX620-X-1000, 26.4" swing, 23.6" turning diameter, 40" machining length, 5.3" spindle hole diameter, 15" 3-jaw chuck, Siemens 840D, tailstock, 2005
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Gildemeister
Model: CTX620 X 1000
Year: 2005
Used CNC Lathe CTX620 X 1000, used, Siemens 840D CNC, 15" 3-jaw chuck, tailstock, and coolant filtration. Swing: 26.4", Machining Length: 40". Ideal for precision tasks. Dimensions: 205"x83"x90", Weight: 22,000 lbs., Spindle Hole Diameter 5.3", Bar Capacity, Maximum 4.75", Swing Diameter, Maximum 31.5", Swing Over ...more
Hyundai Kia #SKT21LMS, CNC lathe, 9.84"chk, 2.559" bore, Fanuc 21i-TB, 2006
Machinery Marketing International | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Hyundai Kia
Model: SKT-21LMS
Year: 2006
Used Hyundai Kia Kia SKT 21 LMS. This pre-owned CNC Lathe is in great working condition and can be securely delivered to your facility floor. If you have any technical questions about this Hyundai Kia CNC Lathe we can review machine. To request a quote, inquire about rigging and trucking or to schedule an inspection ...more
JUST ADDED!
Mori Seiki #NT-3150-DCG/1000SZ, mill turn, 3-jaw 6" chuck, live tooling, 6000 RPM, 40 ATC, 12000 RPM, MSX 711 CNC, Capto C5 toolholders included, 2006
Great American Eqpt Co | Cincinnati, OH
Category: CNC Lathes and Turning Centers
Seller: Great American Eqpt Co
Location: Cincinnati, OH
Mfr: Mori Seiki
Model: NT-3150-DCG/1000SZ
Year: 2006
MORI SEIKI NT3150 DCG/1000SZ CNC MILL TURN, Model NT3150 DCG/1000SZ, New 2006, Stock# Q12282, MSX 711 CNC Control, 6" 3-Jaw Chuck Sub- and Main Spindle 6000 RPM, 40 ATC, 12000 RPM Universal Milling Spindle C5 Taper, Lower Turret with Live Tooling, Chip Conveyor, Coolant Tank, Capto C5 Toolholders Included., CATALOG : ...more
Emco #HyperTurn-665MC-Plus, multi-axis lathe, Iemca Vip 80" E magazine bar feed, 2007
Machnet | Santa Monica, CA
Category: CNC Lathes and Turning Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Emco
Model: HYPERTURN-665MC-PLUS
Year: 2007
2007 Emco Hyperturn 665MC Plus Multi-Axis CNC Lathe, Iemca Bar Feeder, Knoll Chip Conveyor, Tool Holders a& more, 2007 EMCO HYPERTURN 665MC PLUS MULTI AXIS CNC LATHE, TURNING CENTER, SN:R7F-V01, WORKSPACE, CIRCULATION DIAMETER OVER BED 600 MM, CIRCULATION DIAMETER OVER FACE CARRIAGE 500 MM, DISTANCE BETWEEN THE ...more
Okuma #Genos-L3000-E, CNC Lathe, 13.39" max. turning diameter, 19.69" max. turning length, 30 HP, 3800 RPM, A2-8, OSP-P300LA-e, 2019
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Okuma
Model: GENOS-L3000-E
Year: 2019
2019 OKUMA GENOS L3000-E CNC Lathe in used condition. Max Turning Dia: 13.39", Length: 19.69". s 30 Hp power, 38~3,800 speed range, and rapid traverse in X/Z. Includes chip conveyor and OSP-P300LA-e control system., Max Turning Diameter: 13.39, Max Turning Length: 19.69, Spindle Nose Type: Jis A2-8, Speed Range: ...more
Clausing Metosa #CNC2080, flatbed teach CNC turning center, 20" swing, 80" centers, 3.125" bore, D1-8 Camlock, 16-2000 RPM, Fagor Control, tailstock, Steady Rest
Machinery Central | Louisville, KY
Category: CNC Lathes and Turning Centers
Seller: Machinery Central
Location: Louisville, KY
Mfr: Clausing
Model: CNC2080
, 2005 Clausing Metosa CNC2080 Turning Center, used, s Fagor Controls, Baruffaldi 8-station hydraulic head, 20" swing over bed, 80" between centers, 15 HP motor, and various spindle speeds. Includes tailstock & steadyrest. 415V 3-phase power with transformer., Spec Sheet:, 2005 Clausing Metosa CNC 2080 Flat bed ...more
Hwacheon #Mega-95/3000, heavy duty flatbed, Fanuc 118" T CNC Control w/CRT, 38.5" swing, 118" cc, A2-15
Mohawk Machinery Inc | Cincinnati, OH
Category: CNC Lathes and Turning Centers
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Hwacheon
Model: MEGA-95/3000
38.5" x 118" HWACHEON "MEGA-95/3000 HEAVY-DUTY, FLATBED CNC LATHE, Serial No 300061, Model MEGA-95/3000, Fanuc 21-T CNC Control w/CRT (Pendant Mounted), Chuck - 4-Position Hydraulic Turret, A2-15 Spindle Nose, Chip Conveyor (Full Length), CATALOG :, Hole thru Spindle 6", Swing Over Bed, Maximum 38.5", Swing Over Cross ...more
Okuma #Multus-B400W, 8-Axis CNC Lathe, 27.17" X, 60.83" Y, 9.06" Z, 27.9" swing, 61" machining length, 15" chuck, 4" bar, 40 HP, 38-3800 RPM main spindle, 2008
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Okuma
Model: MULTUS-B400W
Year: 2008
Used 5-Axis CNC Lathe with 8-axis capability. s include 27.9" swing, 61" machining length, 15" chuck size, 4" bar capacity, 40 HP, and up to 10,000 RPM. Ideal for complex machining operations., Chuck Size 15", Distance Between Centers 60.83", B-Axis Index 225 Degree at 0.001, C-Axis Index 360 Degrees at 0.001, Max ...more
Okuma #Genos-L300MW, Multi Axis CNC Lathe, 3000 RPM, OSP-P300L-R Control, 2013
Revelation Machinery | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Okuma
Model: GENOS-L-300MW
Year: 2013
Make: Okuma, Model: Genos L300-MW, Year: 2013, Machine Location: Illinois, X-AXIS Movement: 9.3″, Z-AXIS Movement: 18.1″, C-AXIS Movement: 14.1″, Workpiece drm: 11.8″, Number of axis: 4, Number of spindles: 2, Spindle speed range: 3000 1/MIN, Approx. Dimensions: 119.3″ x 88.1″ x ...more
Weingartner #FINISH-320-7000, CNC Spiral finishing lathe, chip conveyor, 1997
HTR Global Inc. | Houston, TX
Category: CNC Lathes and Turning Centers
Seller: HTR Global Inc.
Location: Houston, TX
Mfr: Weingartner
Model: FINISH-320-7000
Year: 1997
WEINGARTNER CNC SPIRAL FINISHING LATHE Model FINISH 320-7000, Serial number SN: 0138, Year of manufacture 1997, Maximum polishing diameter 12.6", Maximum part length 275", Maximum polishing length 255", Spindle center height 49", Cross slide stroke range 2- 6", Quill diameter 8.6", Polishing head degrees swivel angle ...more
Weingartner #Finish-320-7000, spiral finishing lathe, chip conveyor, central lube, 2008
Machnet | Santa Monica, CA
Category: CNC Lathes and Turning Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Weingartner
Model: FINISH-320-7000
Year: 2008
Weingartner Finish 320-7000 Spiral Finishing Lathe, Weingartner Finish 320-7000 Spiral Finishing Lathe, New: 2008, Max Polishing Diameter: 12.6", Maximum Part Length: 275", Maximum Polishing Length: 255", Spindle Center Height: 49", Cross Slide Stroke Range: 2-6", Quill Diameter: 8.6", Polishing Head Swivel Angle: +/- ...more
Knuth #Roturn-400GT, CNC Inclined Bed Lathe
Blumberg Machinery Co | Bannockburn, IL
Category: CNC Lathes and Turning Centers
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Knuth
Model: ROTURN-400GT
Working AreaWorkpiece length (max.) 15 in Center height 8 in Turning diameter over bed 16 in Turning- over support 6 in TravelsTravel X-axis 18.1 in Travel Z-axis 16 in HeadstockSpeed range 60 - 5,000 rpm Spindle mount A2-5 Spindle bore 2 in Spindle bore with draw tube 1.4 in Rapid FeedRapid Feed X-axis 984.25 in/min ...more
Knuth #Roturn-400GT, CNC Inclined Bed Lathe
Blumberg Machinery Co | Bannockburn, IL
Category: CNC Lathes and Turning Centers
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Knuth
Model: ROTURN-400GT
Working AreaWorkpiece length (max.) 15 in Center height 8 in Turning diameter over bed 16 in Turning- over support 6 in TravelsTravel X-axis 18 in Travel Z-axis 16 in HeadstockSpeed range 60 - 5,000 rpm Spindle mount A2-5 Spindle bore 2 in Spindle bore with draw tube 1.5 in Tool HeadTool change type Linearwechsler ...more
Summit #SmartCut-Big-Hole, CNC Lathes, 26.3"/63" sw, 4-Jaw chuck, 60" -200" cc, new
Bud's Machine Tools | Murray, UT
Category: CNC Lathes and Turning Centers
Seller: Bud's Machine Tools
Location: Murray, UT
Mfr: Summit
Model: SMARTCUT-BIG-HOLE
Overview, Type:CNC Metal LathesManufacturer:SUMMITModel:SMARTCUT BIG HOLECondition:New - In-StockStock #:1201Status:For Sale, A Summit® SmartCut II Series Big Hole CNC Lathe is perfect for the machine shop that is looking for the precision of a CNC lathe at the cost of a manual lathe.These lathes combine CNC ...more
JUST ADDED!
Okuma #Multus-U3000 2SW, CNC Lathe, 5-Axis, 25.6" Swing, 59.1" Machining length, 10" Chuck, 3.6" Bar, 25.6" Turning diameter, 30 HP, 5000 RPM, 80-Station ATC, 2015
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Okuma
Model: MULTUS U3000 2SW
Year: 2015
Used 5-axis CNC lathe with Okuma OSP-P300S control, 30 hp, 5000 RPM, automatic tool changer, and Renishaw probing. s include a big bore main spindle, C-axis synchronization, and chip conveyor., MAIN SPINDLE, SPINDLE NOSE A2-8, MAXIMUM SPEED 5,000 RPM, SPINDLE POWER 22 HP (continuous) / 30 HP (30-minute), SPINDLE BORE ...more
Mori Seiki #NT-4250DCG/1500SZ, CNC multi-axis turning center, Moric MSX-711III Control, 28.7" swing, 73.3" centers, 3.1" bar, 10" chuck, 2006
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Mori Seiki
Model: NT-4250DCG/1500SZ
Year: 2006
Mori Seiki NT-4250DCG /1500SZ CNC Multi-Axis Turning Center (subject to buyer verification):CapacityMax Swing of Workpiece28.7”Swing Over Cross Slide28.7” / 15.7” Turret 2Max. Distance Between Centers73.3”Max. Turning Diameter25.9” / Turret 2: 13.7”Max Turning Length60.7”Car ...more
JUST ADDED!
Clausing Metosa #CNC2080, Flat Bed Cnc Lathe, 20" swing, 80" centers, 15 HP, 3.125" bore, 2k RPM, Fagor Control, Steady Rest, tailstock, 2005
Aucto | San Francisco, CA
Category: CNC Lathes and Turning Centers
Seller: Aucto
Location: Louisville, KY
Mfr: Clausing
Model: CNC2080
Year: 2005
THE 2005 CLAUSING METOSA CNC 2080 IS A FLAT BED CNC LATHE FEATURING FAGOR CONTROLS AND A BARUFFALDI MODEL TS180/8-0 8 STATION HYDRAULIC HEAD. THIS TURNING CENTER PROVIDES A 20-INCH SWING OVER THE BED AND AN 80-INCH DISTANCE BETWEEN CENTERS. IT IS A 15 HP (11 KW) SPINDLE MOTOR. KEY INCLUDE A 3.125-INCH SPINDLE BORE AND ...more
Jyoti #ATM-160, inverted vertical turret lathe, Y-Axis, 6" chuck, 1.5" bar, 27.5"X, 7.87"Y, 11.8"Z, 2017, S46765
Perfection Global | Elk Grove Village, IL
Category: CNC Lathes and Turning Centers
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Jyoti
Model: ATM-160
Year: 2017
Capacity Chuck Size: 6”Max. Turning Length: 7.9”Max. Turning Diameter: 6”Travels Cross Travel (X-Axis): 27.5"Longitudinal Travel (Z-Axis): 11.8”Traverse (Y-Axis): 7.9”Rapid Feed: 164 FPMMain Spindle Speed Range: 50-7000 RPMFull Power Speed Range: 1500-4500 RPMC-Axis ...more
Hardinge #SR200MSY, multi-axis CNC turning center, GE Fanuc i Series SR, 20.4" swing, 2.5" bar, 2008
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Hardinge
Model: SR200MSY
Year: 2008
Hardinge SR200MSY Multi-Axis CNC Turning Center (subject to buyer verification):SWING DIAMETER OVER WAY COVER ……. 20.44″TURNING DIAMETER MAX ……………. 12.28″MAX. TURNING LENGTH ……………. 20.1″X-AXIS TRAVEL ...more
Nardini #Fast-Trace, CNC Lathe, 17.5" swing, 40" between centers, 11.75" swing over cross slide, 10" chuck, 2" spindle bore, 8 HP, 3000 RPM, tailstock, coolant pump
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Nardini
Model: FAST TRACE
Used CNC lathe for sale: 2" spindle bore, 17.5" swing over bed, 40" max distance between centers, 11.75" swing over cross slide. GE/FANUC 20T control, 10" 3-jaw chuck, tailstock, and coolant pump. 8 HP, 37.5-3000 RPM. Approx. 5000 lbs., Spindle Bore Diameter 2", Swing Over Bed, Maximum 17.5", Distance Between Centers ...more
Okuma #LB-45-II, CNC Lathe, 33.8" Swing, 24" 3-Jaw Chuck, 10" Bore, 78.7" Turn length, 50 HP, 24-2800 RPM, 23657 hours, 1998
Machine Tool Bids | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Okuma
Model: LB-45 II
Year: 1998
The Okuma LB45-II is a robust CNC horizontal lathe designed for heavy-duty turning operations. It offers a combination of power, precision, and versatility, making it suitable for machining large workpieces. Contact us today for more !, MACHINE, Spindle Bore: 5.12 inches, Swing over Bed: 33.8 inches, Swing Over ...more
Okuma #LB-45II, 33.8" swing, 24" chuck, 3-jaw, 10" bore, 78.7"lgth, A2-11, OSP-7000, 24-2800 RPM, 50 HP, chip conveyor, tailstock, 1998
Machinery Marketing International | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Okuma
Model: LB-45II
Year: 1998
10-inch Spindle Bore| Chip Conveyor| 50HP Spindle Motor|, The Okuma LB45-II is a robust CNC horizontal lathe designed for heavy-duty turning operations. It offers a combination of power, precision, and versatility, making it suitable for machining large workpieces. Contact us today for more !, Spindle Bore: 5.12 ...more
Clausing #2060CNC, CNC Lathe, 22"/13" Swing, 10" 3-Jaw Chuck, 78" max Work length, 3" Bore, 10.6 HP, 2200 RPM, 2006
Prestige Equipment Corp | Melville, NY
Category: CNC Lathes and Turning Centers
Seller: Prestige Equipment Corp
Location: Melville, NY
Mfr: Clausing
Model: 2060CNC
Year: 2006
Swing Over Bed: 22", Swing Over Cross Slide: 13", Maximum Workpiece Length: 78", Spindle Bore: 3", Spindle Nose: D8 (A8-11 Mount), Spindle Speed Range: 2200 RPM, Spindle Drive Motor: 10.6 HP, X Axis Travel: 12", Z-Axis Travel: 76", Tailstock Taper: #5 MT, Approximate Machine Weight: 6,500 Lbs., FAGOR CNC Control, CNC ...more
Milltronics #ML-40/160, CNC lathe, 39.7" swing, 31" chuck, 3-jaw, 14" bore, 160" centers, A2-20, 12 turret, rigid tap, Steady Rest, 2010
Machinery Marketing International | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Milltronics
Model: ML-40/160
Year: 2010
Swing over Bed: 39.7", Swing Over Gap: 50", Swing over cross slide: 26.6", Gap distance: 14.6", Center Distance: 160", X-Axis Travel: 21", Z-Axis Travel: 160", Spindle Bore: 14", Spindle Nose: A2-20, Spindle speed range low: 10 to 375 rpm, Spindle speed range high: 10 to 500 rpm, 2-Speed AC Spindle motor (1 min / 30 ...more
JUST ADDED!
Okuma #Multus-U4000, CNC Lathe, 5-Axis, 25.6" diameter x 78.7" L Turning Size, 22 HP, 3000 RPM, 80-Station ATC, 2015
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Okuma
Model: MULTUS U4000
Year: 2015
Used 5+ axis CNC lathe, s an A2-11 spindle nose, 3,000 RPM speed, and 25.6 max turning diameter. Okuma OSP-P300S control, 80-tool ATC, box-way design, Renishaw probing, and more., Main Spindle, Spindle Nose: A2-11, Maximum Speed:3,000 RPM, Spindle Power:22 HP (Continuous) / 43 HP (30-Minute), Spindle Bore (Big ...more
Nardini #Fast-Trace, CNC lathe,GE Fanuc 20T w/Teach mode, 17.5" swing x 40" centers, 3-jaw 10" chuck
Mohawk Machinery Inc | Cincinnati, OH
Category: CNC Lathes and Turning Centers
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Nardini
Model: FAST-TRACE
17.5" X 40" NARDINI "FAST TRACE" CNC LATHE, SERIAL NO D4JEO-105, TYPE FAST TRACE, 17.5" X 40" NARDINI "FAST TRACE" CNC LATHE, SERIAL NO D4JEO-105, TYPE FAST TRACE, GE/FANUC 20T CNC CONTROL W/TEACH MODE, 10" 3-JAW CHUCK W/JAWS, Tailstock, COOLANT PUMP, CATALOG :, Spindle Bore Diameter 2", Swing Over Bed, Maximum 17.5" ...more
Jyoti #ATM-160, inverted vertical turret lathe, Y-Axis, 6" chuck, 1.5" bar, 27.5"X, 7.87"Y, 11.8"Z, 2016, S46764
Perfection Global | Elk Grove Village, IL
Category: CNC Lathes and Turning Centers
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Jyoti
Model: ATM-160
Year: 2016
Capacity Chuck Size: 6”Max. Turning Length: 7.9”Max. Turning Diameter: 6”Travels Cross Travel (X-Axis): 27.5Longitudinal Travel ( Z-Axis): 11.8”Traverse (Y-Axis): 7.9”Rapid Feed: 50 m/minMain Spindle Spindle Nose (Flat Ø): 140Speed Range: 50-7000 RPMFull Power Speed ...more
Nakamura Tome #SC-250, multi-axis CNC turning center, Fanuc 18iT, 2.5" bar, live tooling, 2004
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Nakamura
Model: SC-250
Year: 2004
Nakamura-Tome SC250 Multi-Axis CNC Turning Center (subject to buyer verification):CAPACITYMax Turning Diameter 11.81”Distance Between Spindles max 27” / min 11” with sub spindleMax Turning Length 19.68”Bar Capacity 2.56”AXIS TRAVELSlide travel (X) 7”Slide travel (Z) ...more
Milltronics #ML-40/160, CNC lathe, 39.7" swing, 31" chuck, 3-jaw, 14" bore, 160" centers, A2-20, 12 turret, rigid tap, Steady Rest, 2010
Machine Tool Bids | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Milltronics
Model: ML-40/160
Year: 2010
MACHINE, Swing over Bed: 39.7", Swing Over Gap: 50", Swing over cross slide: 26.6", Gap distance: 14.6", Center Distance: 160", X-Axis Travel: 21", Z-Axis Travel: 160", Spindle Bore: 14", Spindle Nose: A2-20, Spindle speed range low: 10 to 375 rpm, Spindle speed range high: 10 to 500 ...more
Okuma #MacTurn-250, CNC Lathe, 9-axis functionality, 21.6" swing, 14.57" turning diameter, 39.37" work length, 8" chuck, 2.7" bar, 30 HP, 5000 RPM, 2005
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Okuma
Model: MACTURN-250
Year: 2005
CNC Lathe. 9-axis functionality, 21.65" swing, 30 hp, OSP-P100L Control, ATC, Renishaw Gauging. Used condition., Spindle Bore Diameter 3.15", Bar Diameter Capacity 2.75", Swing Over Bed, Maximum 21.65", Swing Over Saddle 20.87", Work Diameter, Maximum 21.65", Work Length, Maximum 39.37", X-Axis Travel, XA Turret ...more
DMG, Mori Seiki #CTX-Beta-1250-TC, CNC Lathe, 17" X, 4" Y, 51" Z, 19.6" swing, 49.2" between centers, 10" chuck, 45 HP, 5000 RPM, ERGOline CNC, 2010
Olympia Technical Services | Whitby, ON
Category: CNC Lathes and Turning Centers
Seller: Olympia Technical Services
Location: Whitby, ON
Mfr: Dmg
Model: CTX-BETA-1250-TC
Year: 2010
TECHNICAL :, Working area, Swing diameter 500 mm 19.68 in, Turning diameter max 390 mm 15.35 in, Turning length max 1250 mm 49.21 in, Distance between centers 1250 mm 49.21 in, Chuck diameter 250 mm 9.84 in, Bar diameter max 65 mm 2.55 in, Spindle bore diameter 87 mm 3.42 in, Draw bar diameter (internal) 68 mm 2.67 ...more
Featured
DMG, Mori #NTX-1000/SZM, B-Axis CNC lathe, 14.5" swing, 2.5" bar, 14.5" dia., 16.6" lgth, MSX-711, tool presetter, 2011
Machinery Marketing International | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Dmg
Model: NTX-1000/SZM
Year: 2011
5 Axis Simultaneous Control| Tool Presetter| Barfeeder, Used DMG Mori Seiki NTX 1000 SZM B-Axis CNC lathe (2011 ). This is a high-performance multitasking machine that combines 5-axis milling and turning in one setup, ideal for producing complex, high-precision parts for aerospace, medical, and automotive industries. ...more
Knuth #Forceturn, CNC Box Way Lathe
Blumberg Machinery Co | Bannockburn, IL
Category: CNC Lathes and Turning Centers
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Knuth
Model: FORCETURN
Forceturn 630.15Forceturn 630.30Forceturn 630.50Forceturn 800.15Forceturn 800.30Forceturn 800.50 Working Area Turning diameter over bed 26 in 26 in 26 in 32 in 32 in 32 in Bed width 18 in Center height 13 in 13 in 13 in 17 in 17 in 17 in Turning- over support 16 in 16 in 16 in 22 in 22 in 22 in Workpiece length (max.) ...more
Nakamura #TMC-18, CNC Lathe, 10 HP, 4500 RPM, 8" Chuck, 2" Bar Capacity, 2-Axis, Fanuc 21-T Control, 15.7" Swing, 1998
AM Metalmaq Inc | Hialeah, FL
Category: CNC Lathes and Turning Centers
Seller: AM Metalmaq Inc
Location: Hialeah, FL
Mfr: Nakamura
Model: TMC-18
Year: 1998
Year of manufacture 1998, Swing over bed 16" (400mm), Max diameter turned 11.2" (280mm), Max turning length 12.2" (305mm), X-axis travel 10.1" (254mm), Z-axis travel 12" (300mm), Spindle nose type A2-6", Spindle bore 2.3" (58mm), Bar capacity 2" (51mm), Tool capacity 10, Spindle drive motor 15 HP (11.19 KW), Electrics ...more
JUST ADDED!
Okuma #LB-3000EX-M-C1000, CNC turning center with milling, OSP-0P200LA, 22.8" swing, 40.1" centers, 2011
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Okuma
Model: LB-3000EX-M-C1000
Year: 2011
Okuma LB3000EXM/C-1000 CNC Turning Center with Milling (subject to buyer verification):Swing Over Bed: 22.83”Swing Over Saddle: 18.5”Distance Between Centers: 40.16”Max Turning Diameter: 13.39”Max. Turning Length: 39.37”X Axis Travel: 10.24”Z Axis Travel: 41.93”C Axis:.001 ...more
Okuma #Multus-U3000-2SW/1500, B-Axis CNC lathe, 3.58" bore, OSP-P300S, A2-8, 5000 RPM, 2015
Machinery Marketing International | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Okuma
Model: MULTUS-U3000-2SW/1500
Year: 2015
High Pressure Coolant System (1000 PSI)| Lower Turret| Sub Spindle, Used 2015 Okuma MULTUS U3000 2SW/1500 B-Axis CNC Lathe with Okuma OSP-P300S control, this machine is perfect for high-precision machining in oil & gas, aerospace, and defense sectors. It excels at machining complex oilfield components ...more
JUST ADDED!
DMG, Mori #NTX-1000/SZM, B-Axis CNC lathe, 14.5" swing, 2.5" bar, 14.5" dia., 16.6" lgth, MSX-711, tool presetter, 2011
Machine Tool Bids | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Dmg
Model: NTX-1000/SZM
Year: 2011
Used DMG Mori Seiki NTX 1000 SZM B-Axis CNC lathe (2011 ). This is a high-performance multitasking machine that combines 5-axis milling and turning in one setup, ideal for producing complex, high-precision parts for aerospace, medical, and automotive industries. Enables done-in-one machining, reducing setup time while ...more
Mori Seiki #NL-2500SY/700, CNC Lathe, Sub Spindle, Y-Axis, Live Tooling, MSX-850 Control, 22.8" swing, 3.1" bar, 2008
Industrial Machinery NJ, LLC | Livonia, MI
Category: CNC Lathes and Turning Centers
Seller: Industrial Machinery NJ, LLC
Location: Livonia, MI
Mfr: Mori Seiki
Model: NL-2500SY/-700
Year: 2008
MORI SEIKI NL2500SY/700 CNC Lathe, 2008 – Sub Spindle, Y Axis, Live Tooling, Serial # NL251HB3929, Type of CNC Control: MSX-850, Swing Over Bed: 22.83", Max Distance Between Spindle Nose Surfaces: 37.83", Max Turning Diameter: 14.02", Standard Turning Diameter: 10.83", Max Turning Length: 27.76", Bar Capacity: ...more
Bridgeport Romi #EZ-Path-S, CNC teach lathe, 18" swing, 10" chuck, 3-jaw, 2" bar, 40" centers, 7.5 HP, 4000 RPM, tailstock, Dorian quick change tool post w/ tool holders
Machinery Central | Louisville, KY
Category: CNC Lathes and Turning Centers
Seller: Machinery Central
Location: Louisville, KY
Mfr: Romi
Model: EZ-PATH-S
Spec Sheet:, 18 x 40 Bridgeport Romi EZ-Path S CNC Teach Lathe, Max Swing: 18, Distance Between Centers: 40, Standard Chuck Size: 10, X Axis Travel: 8.6, Z Axis Travel: 40, Feedrates Rapid Traverse X Axis: 295 IPM, Rapid Traverse Z Axis: 394 IPM, Spindle Nose Size: A2-5, Spindle Bore: 2.08, Spindle Speed Range: ...more
JUST ADDED!
Okuma #Multus-U3000-2SW/1500, B-Axis CNC lathe, 3.58" bore, 25.6" diameter, 59" lgth, OSP-P300S-H, Renishaw RMP60 part probe, 2015
Machine Tool Bids | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Okuma
Model: MULTUS-U3000-2SW/1500
Year: 2015
Used 2015 Okuma MULTUS U3000 2SW/1500 B-Axis CNC Lathe with Okuma OSP-P300S control, this machine is perfect for high-precision machining in oil & gas, aerospace, and defense sectors. It excels at machining complex oilfield components, downhole tools, valve bodies, connectors, and long shaft work. With its ...more
Featured
Okuma #Multus-U4000-2SW/2000, B-Axis CNC lathe, 4.41" bore, OSP-P300S, A2-11, 3000 RPM, 2015
Machinery Marketing International | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Okuma
Model: MULTUS-U4000-2SW/2000
Year: 2015
High Pressure Coolant System (1000 PSI)| Lower Turret| Sub Spindle, Used Okuma MULTUS U4000 2SW/2000 B-Axis CNC Lathe (2015) with Okuma OSP-P300S Control. This machine is engineered for high-precision machining in the oil & gas and aerospace sectors. It handles complex, multi-operation parts in a single setup ...more
Nakamura Tome #TW-8, 12" swing, 6" chuck, 28" centers, dual spdl./turret, Fanuc 31iA, 2009, #159969
Milton Cat Power Systems Div | Milford, MA
Category: CNC Lathes and Turning Centers
Seller: Milton Cat Power Systems Div
Location: Milford, MA
Mfr: Nakamura
Model: TW-8
Year: 2009
NAKAMURA TOME TW-8 4-AXIS CNC TURNING CENTER, NEW: 2009, ROUND COLLET CAPACITY. 1.34" Left & Right Spindles, CHUCK DIAMETER. 6", STANDARD TURNING DIA. 6.69", MAX. TURNING DIA. 7.48", MAX. TURNING LENGTH. 4.53", DISTANCE BETWEEN SPINDLES. 28.94", DRIVE MOTOR LEFT/RIGHT. 10/7.5HP 10/7.5HP, SPEED RANGE LEFT/RIGHT. ...more
DMG, Mori #NL-2000SY/500, CNC lathe with sub spindle & live tooling, 5-Axis, 22.8" swing, 2.5" bar, 2006
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Dmg
Model: NL-2000SY/500
Year: 2006
2006 DMG MORI NL2000SY/500, X-Axis. 10.24", Y-Axis. 3.94", Z-Axis. 22.83", C-Axis. 360, Swing. 22.8", Machining Length. 20", Turning Dia. 10.9", Max Turning Length. 20.44", Bar Capacity. 2.5", Chuck Size. 8", # Axis. 5, Power. 20 hp, Max RPM. 5,000 RPM, Max Tool Spindle Speed. 6000 rpm, Spindle Nose. A2-6, Twin ...more
Mighty Viper #VT-50AX/4000, CNC Lathe, 39" swing, 35" max. work diameter, 157" machining length, 25" 4-jaw chuck, 9.25" spindle hole diameter, A2-15, 50 HP, 750 RPM, Fanuc 21i-TB, tailstock, 2011
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Mighty Viper
Model: VT-50AX/4000
Year: 2011
Used CNC Lathe. s 39" swing, 157" machining length, 50 hp power, and max 750 RPM. FANUC 21I-TB CNC control, 25 4-jaw chuck, 9.25" spindle bore, gear headstock, and chip conveyor. 46,200 lbs., SWING OVER BED 39", MAX. WORK DIAMETER 35", DISTANCE BETWEEN CENTERS 157", MAX TURNING LENGTH 155", SPINDLE HOLE DIAMETER ...more
Hardinge #CS-2, 19-1/2" swing, 22" centers, 8.74" cross travel, 6" chuck, Fanuc OT, tailstock, conveyor
Smith Machinery Co | Ames, IA
Category: CNC Lathes and Turning Centers
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Hardinge
Model: CS-2
Year: 1988
MAX SWING OVER BED 19.5 inches MAX OD TURNING CAPACITY W/STANDARD TOOLING 7.5 inches MAX MACHINABLE CENTER DISTANCE 22 inches CROSS TRAVEL (X-AXIS) 8.74 inches LONGITUDINAL TRAVEL (Z-AXIS) 21.5 inches RAPID TRAVERSE RATE (X-AXIS) 472 IPM RAPID TRAVERSE RATE (Z-AXIS) 630 IPM NUMBER OF TURRETS 1 TOOL POSITIONS 10 ...more
Milltronics #ML-18 Series D, CNC comb lathe, 19" swing, 10" chuck, 6-jaw, 2.5" bar, 19" dia., 60" lgth, D1-6, 2-Axis, 24 HP, 2600 RPM, Milltronics 7200 Control, 8 station turret, tailstock, 2010
Machinery Central | Louisville, KY
Category: CNC Lathes and Turning Centers
Seller: Machinery Central
Location: Louisville, KY
Mfr: Milltronics
Model: ML-18
Year: 2010
, 2010 Milltronics ML18 CNC Lathe: 19" swing, 60" machining length, 10" chuck size, and 24 hp power. s a 2.56" bar capacity and 8-station turret. Ideal for versatile CNC turning. Dimensions: 138" x 72" x 80", weighing 8500 lbs., Spec Sheet:, 2010 Milltronics Model ML18/60 CNC Combination Lathe, With a generous swing ...more
Okuma #2SP-250H, Twin Turret CNC Lathe, 8.66" diameter x 5.91 " turning, 50-4500 RPM, V12-NC turret, 15/10 HP, OSP-P300LA Control, w/ robot loader, 220/480 V., 3 phase, 144.7 FLA, 2017
Revelation Machinery | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Okuma
Model: 2SP-250H
Year: 2017
Make: Okuma, Model: 2SP-250H, Year: 2017, Machine Location: Upon Request, Max Turning Diameter: 8.66″, Max Turning Length: 5.91”, Travel X-Axis: 5.91”, Z-Axis: 6.10”, Speed Range: 50-4500 rpm, Turret Type: V12 NC, Motor Spindle Drive: 15/10 hp, Okuma OSP-P300LA Control, Robot Loader, Chip ...more
Featured
Okuma #Multus-U4000-2SW/2000, B-Axis CNC lathe, 4.41" bore, OSP-P300S, 80 ATC, Renishaw RMP60 part probe, 2015
Machine Tool Bids | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Okuma
Model: MULTUS-U4000-2SW/2000
Year: 2015
Used Okuma MULTUS U4000 2SW/2000 B-Axis CNC Lathe (2015) with Okuma OSP-P300S Control. This machine is engineered for high-precision machining in the oil & gas and aerospace sectors. It handles complex, multi-operation parts in a single setup with its high torque and big bore capacity. Ideal for oilfield ...more
JUST ADDED!
Southwestern Industries #Trak-TRL-1630-HS, CNC Lathe, 16" swing, 30" centers, 7.5 HP, 150-2500 RPM, ProtoTRAK SLX control, quick change toolpost, 2018
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Southwestern Industries
Model: TRAK-TRL-1630-HS
Year: 2018
Used CNC Lathe in good condition. s 16" swing, 30" max distance between centers, 150-2500 RPM speed range, ProtoTRAK SLX Control, electronic handwheels, quick change toolpost, and more. 230V, 3-Phase., Height of Centers:8, Swing Over Bed:16, Swing Over Cross Slide:8.6, Swing Over Saddle Wings:16, Max Distance Between ...more
Mighty Viper #VT-40A, CNC Lathe, 39.3" swing over bed, 34.64" turning diameter, 37.79" turning length, 15" 3-jaw chuck, 5.15" spindle hole, A2-11, tailstock, 2005
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Mighty Viper
Model: VT-40A
Year: 2005
Used CNC Lathe, Fanuc 21i-TB Control, 15" 3-Jaw Chuck, 12-Position Turret, and more. : 39.37" swing, 34.64" max turn, 60 HP motor, 2000 RPM spindle. Dimensions: 161" x 110". Weight: 28,600 lbs., Swing Over Bed: 39.37", Maximum Turning Diameter: 34.64", Swing Over Cross Slide: 29.13, Maximum Turning Length: 37.79" ...more
Sharp #30160-TC-F, CNC Lathe, 29.9" swing, 157.5" centers, 10-1000 RPM, Fanuc Oi-TF, chip conveyor, tailstock
Southern Fabricating Mchy Sales | Lithia, FL
Category: CNC Lathes and Turning Centers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: 30160-TC-F
29.92” X 157.5” CNC Turning Center with Fanuc Oi-TF Control, Flat Belt Chip Conveyor, Air Assist Manual Tailstock, High Pressure Coolant System, Full Enclosure Splash Guard and Operational Manual., Swing Over Bed: 29.92”, Swing Over Cross Slide: 19”, Distance Between Centers: 157.5” ...more
Fat Fat Haco #TUR-630MN-120, Toolmex CNC lathe, Siemnens Sinumerik 510 Manual Plus Control, 24.8" swing, 120" centers, 2001
Equipment Hub | Decatur, GA
Category: CNC Lathes and Turning Centers
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Fat Haco
Model: TUR-630MN-120
Year: 2001
Stock #: 181260001, Location: Norfolk, NY, Brand: FAT HACO, Model: TUR-630MN-120, Year: 2001, Approx. Shipping Weight: Weight: 2,000 lbs, Approx. Shipping Dimensions: L: 193", W: 85", H: 70", Loading Fee: Rigging Required, Swing Over Bed: 24.8" (630 mm), Swing Over Cross Slide: 14.5-14.6" (370 mm) ...more
Okuma #Multus-U4000-2SW/2000, OSP-P300S Control, Big Bore A2-11 main spindle, Capto C6, 2015
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Okuma
Model: MULTUS-U4000-2SW/2000
Year: 2015
2015 Okuma Multus U4000 2SW/2000, machine, Control: Okuma OSP-P300S, Main Spindle, Spindle Nose:A2-11, Maximum Speed: 3,000 RPM, spindle power: 22 HP (continuous) / 43 HP (30-minute), Spindle Bore (Big Bore): 4.41″, Sub-Spindle: A2-8, Maximum Turning Diameter: 25.6″, Maximum Turning Length: 78.7″ ...more
JUST ADDED!
DMG, Mori #CTX-Beta-1250TC, B-Axis CNC lathe, 19.7" swing, 10" chuck, 2.6" bar, Siemens 840D, tailstock, 2010
Machine Tool Bids | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Dmg
Model: CTX-BETA-1250TC
Year: 2010
Boost productivity with this DMG Mori CTX Beta 1250TC B-Axis CNC Lathe (2010) featuring Siemens 840D control. Designed for high-precision turn-mill operations, it efficiently machines complex parts in a single setup, reducing downtime and improving accuracy. Ideal for aerospace, medical, and advanced industrial ...more
Hwacheon #Mega-95/3000, CNC Lathe, 38.5" swing, 118" between centers, 24" 3-jaw chuck, A2-15, 30 HP, 40-1000 RPM, 12-position turret, Fanuc 21-T, heavy-duty tailstock
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Hwacheon
Model: MEGA-95/3000
Used CNC Lathe: s Fanuc 21-T CNC control, 24" 3-jaw chuck, and 12-position hydraulic tool turret. Offers 6" spindle hole, 38.5" swing over bed, and 30 HP motor. full-length coolant system and chip conveyor., Hole thru Spindle 6", Swing Over Bed, Maximum 38.5", Swing Thru Gap 48.4", Swing Over Cross Slide 26.2" ...more
JUST ADDED!
Milltronics #ML18/60, Cnc Lathe, 19" swing, 60" L, 24 HP, 6 jaw, 10" chuck, tailstock, 8 tool, 2,600 RPM, 2010
Aucto | San Francisco, CA
Category: CNC Lathes and Turning Centers
Seller: Aucto
Location: Louisville, KY
Mfr: Milltronics
Model: ML18/60
Year: 2010
THE 2010 MILLTRONICS ML18/60 IS A CNC COMBINATION LATHE FEATURING A 19-INCH SWING, A 60-INCH MACHINING LENGTH, AND A 19-INCH TURNING DIAMETER. THIS 2-AXIS MACHINE IS A 24 HP AC SPINDLE MOTOR THAT PROVIDES 255 FT-LBS OF TORQUE. THE SPINDLE BORE IS 2.56 INCHES, AND THE SPINDLE SPEED RANGE IS 100 TO 2,600 RPM. IT ...more
Okuma #LU-45-1500, 33" swing, 21" chuck, 78.7" centers, 25.98" dia., 78.74" lgth, 4.33" bore, OSP7000L, tailstock, dual turret, chip conveyor, 1996
Machnet | Santa Monica, CA
Category: CNC Lathes and Turning Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Okuma
Model: LU-45-1500
Year: 1996
1996 Okuma LU-45-1500 CNC Lathe, Okuma LU-45/1500 Twin Turret CNC Turning Center, New: 1996, Swing Over Bed: 33.07", Swing Over Saddle: 21.85", Distance Between Centers: 78.74", Maximum Turning Diameter: 25.98", Maximum Work Length: 78.74", X-axis Travels: Upper Turret 17.32"/ Lower Turret: 12", Y-axis Travels: Upper ...more
Okuma #Impact-LU45-1500, CNC Lathe, 33" swing over bed, 78.7" between centers, 21" chuck, 25.98" turning diameter, 22 tool, 1996
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Okuma
Model: IMPACT-LU45-1500
Year: 1996
CNC Lathe in used condition. s 33.07" swing over bed, 78.74" between centers, dual turret with 22 tool stations, Okuma OSP7000L CNC control, and 21" chuck., Swing Over Bed: 33.07", Swing Over Saddle: 21.85", Distance Between Centers: 78.74", Maximum Turning Diameter: 25.98", Maximum Work Length: 78.74", X-axis ...more
Hitachi-Seiki #HiCell-40, 27.6" max. swing, 15" chuck, 3-jaw, 4.7" hole, live tooling, 20-1800 RPM, Y-Axis, 1997
Wisconsin Metalworking Machinery | Waukesha, WI
Category: CNC Lathes and Turning Centers
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Hitachi-Seiki
Model: HICELL-40
Year: 1997
, MAKE. HITACHI SEIKI, MODEL. HIGHCELL 40, SERIAL NUMBER. CA-40069, AGE (YEAR). 1997, MAX SWING. 27.6" (700 MM), CHUCK DIAMETER (3 JAW). 15" (381 MM), MAX MACHINABLE LENGTH. 61.8" (1570 MM), SPINDLE SPEED RANGE. 20 - 1800 RPM GEAR RANGES. 3, SPINDLE END SHAPE. A-11, SPINDLE THRU HOLE DIA. 4.7" (120 MM), SPINDLE MOTOR. ...more
Mori Seiki #NL-2500SY/700, CNC lathe, sub spindle, Y-Axis, live tooling, 22.8" swing, 3.1" bar, 2005
Industrial Machinery NJ, LLC | Livonia, MI
Category: CNC Lathes and Turning Centers
Seller: Industrial Machinery NJ, LLC
Location: Livonia, MI
Mfr: Mori Seiki
Model: NL-2500SY/-700
Year: 2005
MORI SEIKI NL2500SY/700 CNC Lathe, 2005 – Sub Spindle, Y Axis, Live Tooling, Serial # NL251EK1558, Type of CNC Control: MSX-850, Swing Over Bed: 22.83", Max Distance Between Spindle Nose Surfaces: 37.83", Max Turning Diameter: 14.02", Standard Turning Diameter: 10.83", Max Turning Length: 27.76", Bar Capacity: ...more
Southwestern Industries #Trak-TRL-2470SX, 24" swing, 12" BTC chuck, 3-jaw, 70" cc, 4.09" hole, D1-8, #8MT, Prototrak SLX, 2016
R & J Machinery Sales | Milford, MI
Category: CNC Lathes and Turning Centers
Seller: R & J Machinery Sales
Location: Milford, MI
Mfr: Southwestern Industries
Model: TRAK-TRL-2470SX
Year: 2016
TRAK TRL 2470SX, Video:, Machine, • Height of Centers- 12” • Distance between centers- 70” • Swing over bed – 24” • Swing over saddle wings – 24” • Swing over cross slide – 14.5” • Cross slide travel – 12.5” • Tool section ...more
JUST ADDED!
Daewoo Doosan #Puma-GT-2600, CNC lathe, 24.8" swing, 10" chuck, 3-jaw, 3.2" bar, 33.2" centers, 18.1" dia., 25.6" lgth, 35-3500 RPM, A2-8, 12 turret, Fanuc I, LNS Turbo HB chip conveyor, tailstock, 2015
Machine Tool Bids | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Daewoo Doosan
Model: PUMA-GT-2600
Year: 2015
The Doosan Puma GT 2600 CNC Lathe (2015) with Fanuc i-Series control delivers powerful, high-precision turning, drilling, and live tooling for complex parts. Built with rigid box guideways for superior stability, it excels in heavy-duty machining of gears, shafts, and hydraulic components. Ideal for automotive ...more
