CNC Lathes and Turning Centers in North Carolina

Seller: Charleston Annex Corporation

Location: Indian Trail, NC

Mfr: Daewoo Doosan

Model: LYNX-220A

Year: 2012

22474 Doosan 220A CNC Turning Center with LNS Quick Load Servo 80 S2 Magazine Bar Feeder, Model: 220A sn:ML-0013-005627 mfg.2012, Bar Capacity:, 1.8", Swing:, 20.1, Center Distance:, 12.7", Turning Diameter:, 12.6", Spindle Nose:, A2-5, Spindle Speeds:, 6,000, Turret Positions:, 12, Tailstock | Parts Catcher | Tool ...more

8 Photos

Haas #ST-15, CNC lathe, 16.5" swing, 8" chuck, 2.5" bar, 12 station turret, 4000 RPM, 20 HP, 2022

Carolina Machinery Sales | Monroe, NC

704-28... (Show) 704-288-1904

Seller: Carolina Machinery Sales

Location: Monroe, NC

Mfr: Haas

Model: ST-15

Year: 2022

Standard s to be confirmed, STANDARD PROGRAM MEMORY, 1 GB, 30-GALLON COOLANT TANK, 4000-RPM SPINDLE,.4.0.0.0.-r.p.m.S.p.in.d.l.e.,.2.0.h.p., 12-STATION BOLT-ON TOOL TURRET, BOLT-ON TOOLHOLDER KIT, 3/4", Bolt-On Toolholder Kit; includes 1 each 0.75" Face Groove Holder, 1 each 1" ID, 1 each 1.25" ID, 4 each ...more

7 Photos

Johnford #LC-50360D, 50" swing x 354" centers HD CNC flatbed lathe with Y-Axis & milling

Charleston Annex Corporation | Indian Trail, NC

704-82... (Show) 704-821-7370

Seller: Charleston Annex Corporation

Location: Charlotte, NC

Mfr: Johnford

Model: LC-50360D

Year: 2016

22493 Johnford LC-50360D 50” x 354” HD CNC Flatbed Lathe with Y-Axis & Milling, Model: LC-50360D mfg.2016, Swing Over Bed Ways:, 50.19", Swing Over Cross Slide:, 35.82", Center Distance:, 354", Bed Width:, 45", Headstock Spindle Bore:, 6.92", Auto-Headstock Spindle Speeds:, to 1,000 RPM, Headstock ...more

Locatelli MK-CNC-V.1, CNC controlled lathe, 6-axes CNC lathe with hopper feed, C-axis spindle, Z-axis longitudinal carriage travel, 2025, new

Ex-Factory | Charlotte, NC

704-28... (Show) 704-285-2223

Seller: Ex-Factory

Location: Charlotte, NC

Mfr: Locatelli

Year: 2025

LOCATELLI MULTIMATIK (MK) CNC 1600 V.1,.Fully Automatic (6) Axes CNC Lathe With Hopper Feed. -- Axis Configuration: 4-Axes (A-U-V-W) CNC controlled knife movement, controlled by Servo motors paired with ground recirculating ball screws with preloaded lead nut; asynchronous air-cooled spindle motor C-Axis controlled; ...more

Locatelli MK-S-CNC, CNC controlled lathe, 4-axes CNC lathe, C-axis spindle, Z-axis longitudinal carriage travel, V and W-axes transverse carriages, 2025, new

Ex-Factory | Charlotte, NC

704-28... (Show) 704-285-2223

Seller: Ex-Factory

Location: Charlotte, NC

Mfr: Locatelli

Year: 2025

LOCATELLI MULTIMATIK S-CNC.Fully Automatic (4) Axes CNC Lathe. -- Axis Configuration: CNC Controlled C-Axis for spindle motor and motor positioning in degrees, Z-Axis for Longitudinal carriage travel, V & W- Axes for transverse carriages mounted on the front of carriage. Standard machine is fitted with (2) rear ...more

7 Photos

Get email updates for newly added CNC Lathes and Turning Centers

A CNC lathe machine, or CNC turning machine, is a machine tool that rotates a bar of material to precisely cut, shape, and finish materials such as metal, wood, and plastic. The main spindle rotates the material, while the cutting tool can move along multiple axes.

Mazak #Integrex-e500Hx120, multi-tasking CNC turning center, 32.2" swing, 122.9" centers, 4" bar, 3-jaw 15" chuck, 2007

Piselli Enterprises | Statesville, NC

Seller: Piselli Enterprises

Location: Statesville, NC

Mfr: Mazak

Model: INTEGREX-E-500HX120

Year: 2007

Mazak integrex e500H x 120 excellent machine under power, contact us today for further information new 2007.

6 Photos

Mazak #Multiplex-4200, Dual Spindle CNC Lathe, 12.6" turn diameter, 21.32" turn length, 5000 RPM, A2-6 spindle nose, 9" X, 17.25" Z, 19.37" Z, 2003, #22367

Charleston Annex Corporation | Indian Trail, NC

704-82... (Show) 704-821-7370

Seller: Charleston Annex Corporation

Location: Indian Trail, NC

Mfr: Mazak

Model: MULTIPLEX-4200

Year: 2003

22367 Mazak Multiplex 4200 Dual Spindle CNC Lathe, Model: Multiplex 4200 sn:165989 mfg.2003, Max. Turning Diameter: 12.6", Max. Turning Length: 21.32", Max. Bar Diameter: 2", Max. Spindle Speeds: to 5,000 RPM, Spindle Nose: A2-6, Turret Positions: (2) 12 Positions, X-Axis Travel: 9", Z1-Axis ...more

Muratec #ML400G, CNC turning machines, Fanuc controls, tailstock, single turret, gantry loader, 2011

Piselli Enterprises | Statesville, NC

Seller: Piselli Enterprises

Location: Statesville, NC

Mfr: Muratec

Model: ML400

Year: 2011

Muratec Model ML 400G CNC turning centers. machines are specially Optional heavy duty A/C spindle motors, tailstocks, single turrets, Gantry loaders, part holders, chip conveyors, to manufacture precision shafts. the machines can be run in the automatic load system using the gantry or manually loaded as presently done ...more

Muratec #MW-120, twin spindle single gantry CNC turning centers, 8" chucks, 2005 (2 available)

Piselli Enterprises | Statesville, NC

Seller: Piselli Enterprises

Location: Statesville, NC

Mfr: Muratec

Model: MW-120

Year: 2005

Muratec Model MW120 CNC twin spindle CNC Turning centers. Single gantry machines with 8" chucks and tooling. Machines are new in 2005, no part stackers or loaders as they were gantry fed by overhead gantry system. 2 available located in statesville NC.

Muratec #MW-120, twin spindle single gantry CNC turning center w/stacker, Fanuc pendant Control, 2013

Piselli Enterprises | Statesville, NC

Seller: Piselli Enterprises

Location: Statesville, NC

Mfr: Muratec

Model: MW-120

Year: 2013

Muratec Model MW120 twin spindle single gantry CNC Turning center w/ stacker loader New 2013 s/n 1480.

Muratec #MW-120, twin spindle turning center w/stacker loader single gantry, chip conveyor, 2011

Piselli Enterprises | Statesville, NC

Seller: Piselli Enterprises

Location: Statesville, NC

Mfr: Muratec

Model: MW-120

Year: 2011

Muratec model MW 120 twin spindle turning center, w/ stacker loader single gantry, chip conveyor New 2011 s/n 1368.

9 Photos

Muratec #MW-120, twin spindle turing center, w/stacker loader single gantry, chip conveyor, 2011/2012 (2 available)

Piselli Enterprises | Statesville, NC

Seller: Piselli Enterprises

Location: Statesville, NC

Mfr: Muratec

Model: MW-120

2 Muratec model MW 120 twin spindle turning centers, w/ stacker loader single gantry, chip conveyors New 2011 & 2012 Canada Location !!.

Muratec #MW-200, twin spindle turning centers with chip conveyor, misc tooling, 2002-2005

Piselli Enterprises | Statesville, NC

Seller: Piselli Enterprises

Location: Statesville, NC

Mfr: Muratec

Model: MW-200

Year: 2002

Muratec Model MW 200 twin spindle turning centers, with chip conveyors and misc tooling, New 2002-2005, Machines are coming from a production faciliity machining good quality parts. note machines are not presently chucks ! not all have stacker loaders!!.

7 Photos

Nakamura #SC-250, 2-Axis CNC lathe, Fanuc controls, 22" swing, 28.09" cc, 2" bar, tailstock, very good condition

Piselli Enterprises | Statesville, NC

Seller: Piselli Enterprises

Location: Statesville, NC

Mfr: Nakamura

Model: SC-250

Nakamura Tome CNC lathe model SC-250 w/ Fanuc controls & tailstock very good condition.

8 Photos

Okuma-Howa #25H-2SP, CNC twin spindle turning machine, Fanuc 18, (2) 12" chucks, 1997

Piselli Enterprises | Statesville, NC

Seller: Piselli Enterprises

Location: Statesville, NC

Mfr: Okuma-Howa

Model: 25H-2SP

Year: 1997

Okuma & Howa, Model: 25H-2SP, CNC Twin Spindle Turning Machine, Fanuc 18 controls, with 2 Precision 12" chucks, Chip conveyor, New 1997..

JUST ADDED!

Takisawa #T-200,CNC Lathe, 20 HP, 5000 RPM, 16" diameter x 50" L max turn,

Aucto | San Francisco, CA

Seller: Aucto

Location: Troutman, NC

Mfr: Takisawa

Model: T-200

* Motor Power: 20 HP, * Spindle Speed: 5,000 RPM, * Max Turning Diameter: 16 inches, * Max Turning Length: 50 inches.

JUST ADDED!

Takisawa #TCC-1000GL2, CNC Lathe, 30 HP, 4500 RPM, 16" diameter x 60" L max turn, 12 position, Fanuci0TD, 2011

Aucto | San Francisco, CA

Seller: Aucto

Location: Troutman, NC

Mfr: Takisawa

Model: TCC-1000GL2

Year: 2011

CONVEYOR BELT: 12 X 48 IN, Motor Power: 30 HP, Spindle Speed: 4,500 RPM, Max Turning Diameter: 16 inches, Max Turning Length: 60 inches, Tool Capacity: 12-position turret, CONTROLS: FANUC SERIES 0I-TD.

JUST ADDED!

Miyano #LZ-01R, CNC lathe, 9.5" x 7.5" travel, 6" chuck, 60-6000 RPM, Fanuc 21i-T, 2003 (2 available)

Aucto | San Francisco, CA

Seller: Aucto

Location: Troutman, NC

Model: LZ-01R

Year: 2003

Max Machining Length: 3.15 inches, X-Axis Travel: 9.45 inches, Z-Axis Travel: 7.48 inches, Chuck Size: 6 inches (hydraulic), Spindle Speed: 60 - 6,000 RPM, CONTROLS: FANUC SERIES 21I-T, HZ: 50/60.

JUST ADDED!

Miyano #LZ-01R, CNC lathe, 9.5" x 7.5" travel, 3.2" max L, 6" chuck, 60-6000 RPM, Fanuc 21i-T, 200-220 V., 2004 (2 available)

Aucto | San Francisco, CA

Seller: Aucto

Location: Troutman, NC

Model: LZ-01R

Year: 2004

MAX MACHINING LENGTH: 3.15 INCHES, X-AXIS TRAVEL: 9.45 INCHES, Z-AXIS TRAVEL: 7.48 INCHES, CHUCK SIZE: 6 INCHES (HYDRAULIC), SPINDLE SPEED: 60 - 6,000 RPM, SPINDLE MOTOR: 5.5 / 7.5 KW, CONTROLS: FANUC SERIES 21I-T, VOLTS: AC200 / 200 - 220V, PHASE: 3, KVA: 21.0, HZ: 50/60.

JUST ADDED!

Miyano #LZ-01R, CNC lathe, 9.5" x 7.5" travel, 3.2" max L, 6" chuck, 60-6000 RPM, Fanuc 21i-T

Aucto | San Francisco, CA

Seller: Aucto

Location: Troutman, NC

Model: LZ-01R

Max Machining Length: 3.15 inches, X-Axis Travel: 9.45 inches, Z-Axis Travel: 7.48 inches, Chuck Size: 6 inches (hydraulic), Spindle Speed: 60 - 6,000 RPM, CONTROLS: FANUC SERIES 21I-T, HZ: 50/60.