19 Results
JUST ADDED!
10" x 36" Rockwell #25-700, Cabinet Metal Lathe, under drive motor
Southern Latch Mfg Inc | St Augustine, FL
Category: Engine Lathes
Seller: Southern Latch Mfg Inc
Location: St. Augustine, FL
Mfr: Rockwell
Model: 25-700
Vintage Rockwell (Delta) Metal Lathe – Serial #1408238 – Includes Collet Closer & Tooling., Manufacturer: Rockwell / Delta (Made in USA). Model/Serial: Serial #1408238. s: Includes an integrated cabinet base and under-drive motor. a quick-change gearbox for easy threading and feed rate adjustments. ...more
JUST ADDED!
11" x 18" Hardinge #HLV-H, super precision tool rool lathe, 1-1/4" hole, #2MT, AcuRite 1-Axis digital read out, 1997
Generation Machine Tools | Sarasota, FL
Category: Engine Lathes
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Hardinge
Model: HLV-H
Year: 1997
HARDINGE HLV-H Super Precision Tool Room Lathe 1997’ #8249, HARDINGE HLV-H Super Precision Tool Room Lathe 1997’ #8249, Reference #8249, Model # HLV-H, Serial # 15054-T, Year of manufacture- 1997’, Spindle construction- HARDINGE ball bearing, Spindle nose- HARDINGE taper, Spindle capacity with round ...more
11" x 18" Hardinge #HLV-TFB, Precision Toolroom Lathe, 6" swing over cross slide, 1.25" spindle bore, 1.5 HP, 3000 RPM, 208 Volt, 3PH
Generation Machine Tools | Sarasota, FL
Category: Engine Lathes
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Hardinge
Model: HLV-TFB
HARDINGE TFB Precision Tool Room Lathe USA #8119, HARDINGE TFB Precision Tool Room Lathe USA #8119, Reference #8119, Model # TFB, Serial # HLVH-H-4973, Swing over bed- 11”, Swing over carriage- 9”, Swing over cross slide- 6”, Distance between centers- 18”, Spindle bore- 1-1/4”, Spindle ...more
11" x 18" Sharp #1118H, precision toolroom lathe, 5 HP, splash guard, coolant system
Southern Fabricating Mchy Sales | Lithia, FL
Category: Engine Lathes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: 1118H
11" x 18" Precision Toolroom Lathe with 5HP 4,000 RPM DIGITAL VARIABLE SPEED (D.V.S.) Drive System, 50 Millionth Tir Accuracy, Harding Type Design, Hardened and ground spindle, Independent electric feed-rate control on carriage and cross slide, Quick-change inch/metric gearbox with 36 changes, Spindle supported by ...more
11" x 18" New Expand Machinery #GHT-618, Lathe, electronic variable speed inverter dr, 6" swing over cross slide, 3 HP, inch threading Control, 1-shot lube
Southern Fabricating Mchy Sales | Lithia, FL
Category: Engine Lathes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Model: GHT-618
6” X 18” Toolroom Lathe with Electronic Variable Speed Inverter Drive Spindle Motor, Dual Reading Inch / Metric position Indicator on All Axis, Thread Length Control Stops with Fine Trip-Out Adjustments, Hardened and Ground Bedways and One-Shot Lubricator for Carriage and Cross Slide Ways and Gib ...more
Get email updates for newly added Engine Lathes
Engine Lathes (also known as manual lathes or conventional lathes) are versatile machines used for turning, cutting, and shaping metal or other materials. Commonly found in metalworking, automotive, and manufacturing industries, they are ideal for producing cylindrical parts like shafts and bushings. Engine lathes are essential for precise machining and prototyping in workshops and factories.
13" x 30" Clausing Metosa #C1330S, engine lathe, 8" Bison 3-jaw chuck, 1.5" bore, 5 HP, 2000 RPM, D1-5 Camlock
Generation Machine Tools | Sarasota, FL
Category: Engine Lathes
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Clausing
Model: C1330S
CLAUSING METOSA #C1330S 13” x 30”cc Engine Lathe # 7612, ImperialMetricSwing 13" 330.2 mm Centers 30" 762 mm Spindle Bore 1.5" 38.1 mm Power 5 hp 3.7 kW RPM 2,000 RPM 2,000 RPM Swing Over Cross Slide 6.89" 175.01 mm Dimensions 73” L x 32” W x 67”H 73” L x ...more
13" x 40" Sharp #1340VS, manual engine lathe, 2000 RPM, 3 HP, 3-Jaw 8" chk, Steady Rest, coolant system
Southern Fabricating Mchy Sales | Lithia, FL
Category: Engine Lathes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: 1340VS
13" X 40" Capacity Manual Engine Lathe with 2000 RPM 3HP Drive, D1-4 Camlock Spindle, 8" 3 Jaw Chuck, Gap Bed Frame, Single Phase Electrics, Coolant System Foot Brake and Tailstock., STANDARD EQUIPMENT:, 3-Jaw 8” ChuckRemovable GapSteady Rest (Capacity = ¼” – 3-3/4”)Coolant SystemSplash ...more
14" x 40" Sharp #1440F, precision geared head manual engine lathe, 3-Jaw 8" chuck
Southern Fabricating Mchy Sales | Lithia, FL
Category: Engine Lathes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: 1440F
14" X 40" Capacity Manual Engine Lathe with 1,800 RPM 3HP, 2-Speed Gear Drive, D1-4 Camlock Spindle, 8" 3 Jaw Chuck, Gap Bed Frame, Single or 3 Phase Electrics, Coolant System Foot Brake and Tailstock., STANDARD EQUIPMENT:, 3-Jaw 8” ChuckSteady Rest (Capacity = ¼” – 3-3/4”)Coolant ...more
14" x 40" Sharp #1440V, precision variable speed manual engine lathe, 3-Jaw 8" chuck
Southern Fabricating Mchy Sales | Lithia, FL
Category: Engine Lathes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: 1440V
14" X 40" Capacity Manual Engine Lathe with 2,200 RPM 3HP, Infinitely Variable Drive, D1-4 Camlock Spindle, 8" 3 Jaw Chuck, Gap Bed Frame, Single or 3 Phase Electrics, Coolant System Foot Brake and Tailstock., STANDARD EQUIPMENT:, 3-Jaw 8” ChuckSteady Rest (Capacity = ¼” – 3-3/4”)Coolant ...more
16" x 40" Ganesh #GTW-1640, Engine Lathe, 16" swing, 9-7/16" swing over cross slide, 7.5 HP, 2000 RPM, tailstock, digital read out, 8" chuck, 220 V.
Southern Fabricating Mchy Sales | Lithia, FL
Category: Engine Lathes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Ganesh
Model: GTW-1640
16” X 40” Engine Lathe with Newall 2 - Axis Premium Digital Readout, 8” 3-Jaw Scroll Chuck, 10” 4-Jaw Independent Chuck, Steady Rest w/ 1” - 6” Capacity, Follower Rest, Full Length Splash Guard, Chuck Guard with Interlock, Foot Brake, 4-Way Tool Post with Wrench, Machine Levelling ...more
16" x 40" Sharp #1640LV, variable speed engine lathe, 2000 RPM, 3-Jaw 10" chk, Steady Rest, Follow Rest
Southern Fabricating Mchy Sales | Lithia, FL
Category: Engine Lathes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: 1640LV
16" X 40" Capacity Manual Engine Lathe with 2,000 RPM 7.5HP, DIGITAL VARIABLE SPEED DRIVE, D1-8 Camlock Spindle, 3-1/16" Spindle Bore, 10" 3 Jaw Chuck, Gap Bed Frame,Coolant System, Full Length Splash/Chip Guard, Foot Brake, Halogen Work Light and Tailstock., STANDARD EQUIPMENT:, 3-Jaw 10” ChuckCoolant ...more
16.5" x 60" Romi #Tormax-18-8, engine lathe, 10" Bison 3-jaw chuck, 2.75" bore, D1-6 spindle mount, 90-1800 RPM, Newall NMS300 digital read out, inch/metric, work light, 1996
Generation Machine Tools | Sarasota, FL
Category: Engine Lathes
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Romi
Model: TORMAX-18-8
Year: 1996
ROMI TORMAX 16-8 16” x 60” Engine Lathe DRO 1996’ #7932, ROMI TORMAX 16-8 16” x 60” Engine Lathe DRO 1996’ #7932, Reference # 7932, Model # TORMAX 16-8, Serial # 002-080905-193, Year of manufacture- 7/1996’, Swing over ways- 16-1/2”, Swing over cross slide- 9-5/8” ...more
17" x 33" Cadillac Mori Seiki #1733, engine lathe, 10" 3-jaw chuck, 2-9/32" bore, 32-1800 RPM, D1-6, inch/metric
Generation Machine Tools | Sarasota, FL
Category: Engine Lathes
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Mori Seiki
Model: 1733
YAM 17” x 33” Engine Lathe Cadillac Mori #7563, YAM 17” x 33” Engine Lathe Cadillac Mori #7563, Model # 1733, Serial # 058282, Swing over bed- 17”, Swing over cross slide- 10”, Distance between centers- 33”, Spindle speeds- (12) 32 – 1,800 R.P.M., Spindle taper- D1-6 ...more
JUST ADDED!
17" x 102" South Bend #17-Turn-Nado, engine lathe, 2.75" bore, D1-8, (18) 30-1500 RPM, #4MT tailstock, 12" 3-jaw chuck
Generation Machine Tools | Sarasota, FL
Category: Engine Lathes
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: South Bend
Model: 17-TURN-NADO
SOUTH BEND 17” x 102”cc TURN-NADO LATHE #8318, SOUTH BEND 17” x 102”cc TURN-NADO LATHE #8318, Reference # 8318, Model # 17” TURN-NADO, Serial # 71GJ2162, Swing over bed- 17-1/8”, Swing over cross slide- 10-1/2”, Distance between centers- 102”, Spindle nose taper- D1-8 ...more
20" x 60" Ganesh #GTW-2060, geared head engine lathe, 10 HP, 10-1550 RPM, new
Southern Fabricating Mchy Sales | Lithia, FL
Category: Engine Lathes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Ganesh
Model: GTW-2060
20” X 60” Engie Lathe with 10 HP Heavy Duty Spindle Motor, 12 Speed Geared Head, Chuck Guard with Micro-Switch to Control Spindle, Inch / Metric Diametral & Modular Threading Capabilities w/o Changing Gears, Automatic Way Lubrications with Filtered Pressure Lubrication System and Flood Coolant System. ...more
20" x 120" Standard Modern #20120, engine lathe, 15.5" 4-jaw chuck, 3.06" bore, 15 HP, 27-1600 RPM, inch/metric
Generation Machine Tools | Sarasota, FL
Category: Engine Lathes
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Modern
Model: 20120
STANDARD MODERN 20120 20” x 120”cc Engine Lathe #7696, ImperialMetricSwing 20" 508 mm Centers 120" 3,048 mm Spindle Bore 3.06" 77.724 mm Power 15 hp 11.2 kW RPM 1,600 RPM 1,600 RPM Swing Over Cross Slide 12" 304.8 mm Dimensions 186”L x 56” W x 65” H 186”L x ...more
22" x 80" Ganesh #GTW-2280, Lathe, 14-1/8" swing over cross slide, 29-3/8" gap, 16-1/8" bed, 15 HP, 15-1200 RPM, 4-1/8" bore, tailstock, new
Southern Fabricating Mchy Sales | Lithia, FL
Category: Engine Lathes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Ganesh
Model: GTW-2280
22” X 80” Engine Lathe with 15 HP Spindle Motor, 12 - Spindle Speed Gear Range for High Torque, D1-11 Camlock Spindle, 4-” Spindle Bore, Longitudinal Rapid Traverse Positioning, Efficient 2 - Speed Quill Advance and One Piece Casting Base, Swing Over Bed: 22”, Distance Between Centers: ...more
36" x 60" Lehmann, 2-1/4" spdl hole, 20 HP, (16) speeds, 4-Jaw 24" chk, tool post, face plate
Holland Machinery Company Inc | Miami, FL
Category: Engine Lathes
Seller: Holland Machinery Company Inc
Location: Miami, FL
Mfr: Lehmann
USED "LEHMANN" GEARED HEAD QUICK CHANGE ENGINE LATHE HEAVY DUTY, MODEL 36 HYDRATROL, CAPACITY 36" x 60", ACTUAL SWING OVER THE BED 37-1/2", SWING OVER THE CROSS SLIDE 26", DISTANCE BETWEEN CENTERS 60", WIDTH OF BED 27-1/2", SPINDLE HOLE 2-1/4", THREAD CUTTING RANGE PER INCH (72) ...more
55" x 157" Saro #Saro10, flat bed lathe, 4.13" spindle bore, Siemens 840C Control, 1998
Southern Fabricating Mchy Sales | Lithia, FL
Category: Engine Lathes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Saro
Model: SARO10
Year: 1998
55.18" X 55.18" X 157.48" Flat Bed CNC Lathe with Siemens 840C CNC Control, 37/68 HP Spindle Motor, 4 Position Turret, 31.5" - 4 Jaw Manual Chuck, Heavy Duty Tailstock and a Set Of Steady Rests, Maximum Swing Over The Bed: 55.18”, Maximum Swing Over The Carriage: 55.18”, Maximum Center Distance: ...more
