For Sale by Southern Fabricating Mchy Sales
Description
13" X 40" Capacity Manual Engine Lathe with 2000 RPM 3HP Drive, D1-4 Camlock Spindle, 8" 3 Jaw Chuck, Gap Bed Frame, Single Phase Electrics, Coolant System Foot Brake and Tailstock.
STANDARD EQUIPMENT:
- 3-Jaw 8” Chuck
- Removable Gap
- Steady Rest (Capacity = ¼” – 3-3/4”)
- Coolant System
- Splash Guard
- 4-Way Tool Post
- 6” Diameter Back Plate
- Threading Dial
- Foot Brake
- Center Sleeve (MT #5 x #3)
- Dead Centers (MT #3)
- Wired 220V (**440V – Optional additional transformer charge required)
- Tool Kit (includes: Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip Screwdriver, Flat Head Screwdriver, Oil can, Grease Gun, Rear Way Cover Bracket, Pin for Indicator, Can of Paint)
FEATURES:
- 13”x 40” Capacity
- 7-5/8” Over Cross Slide
- 40-2000 RPM
- “VS” Model can run single phase electrics
- D1-4 Camlock Spindle 1-1/2” Bore
- Gap Bed
- 3 HP Motor (2-Speed Motor)
- Hardened and Ground Bed Ways (Rockwell 50)
- Larger Compound, Tailstock, and Apron Allow Heavier Cutting with Less Vibration than Competitive Models Vari-Speed, All Geared Headstock Housed inside a Sturdy Cast Iron Base.
- Jog Button for Easy Gear Engagement and Inching Spindle
- Quick Change Gearbox Offers a Wide Range of Threads
SPECIFICATIONS:
Capacity
Swing Over Bed: 13”
Swing Over Cross Slide: 8-5/16”
Swing Over Gap: 18-1/2”
Width Of Bed: 7-1/2”
Width of Gap: 9.25”
Distance Between Centers: 40”
Headstock
Spindle Nose Type: D1-4 camlock
Spindle Bore: 1-9/16”
Spindle Speeds: 40-2,000 RPM
Taper of Spindle Bore: MT#5
Threads and Feeds
Longitudinal Feeds – in/rev (40): 0.0016 - 0.046
Cross Feeds – in / rev (40): 0.0005 –0.015”
Inch Threads (40): 2-56 tpi
Metric Threads (22): 0. 5 –12mm
Leadscrew Pitch, Diameter: 8 tpi, 1”
Carriage
Apron Width: 11”
Cross Slide Width: 4.5”
Cross Slide Travel: 6-3/4”
Compound Rest Travel: 3-1/2”
Bed
Bed Length: 64”
Bed Width: 7-1/2”
Tailstock
Quill Travel (graduated): 4”
Quill Diameter: 1-9/16”
Quill Taper: MT#3
General
Spindle Motor: 3 HP
Net Weight (approx.): 1,550 LBS
Standard Color: Gray
Electrical:
Voltage 220 3PH (440 volts optional)
Total Power Consumption 220V 3KVA/10 amps, 440V 3KVA/5 amps
***All Price, Location and Specifications Subject to Change without Notice***
MANY OPTIONS AVAILABLE TO CUSTOMIZE YOUR MACHINE - CALL FOR COMPLETE QUOTATION LISTING ALL AVAILABLE OPTIONS.
(Get the 1340VS-K Package which includes: 2 Axis Newall Digital Readout, Follower Rest, Chuck Guard with Limit Switch and Work Light all for just $14,400)
Get Your Price from Southern Fabricating Mchy Sales!
Buyers Who Viewed This Listing Also Viewed:
13" x 40" Sharp #1340VS, Precision Lathe with Digital Variable Speed Control, 8.31" Cross Slide, 18.5" Gap, D1-4 Camlock, 1.56" Spindle Bore, 40-2000 RPM, new
13" -18" x 40" -80" Sharp #1340VS, 1440, 1640, 1660, 1860, 1880 Precision Engine Lathe, new, (7 available)
13" x 40" Clausing Colchester #Master-2500, engine lathe, 7" swing over cross slide, 1.375" bore, 5 HP, 2500 RPM, 230 V., 3-phase
13" x 40" Hercules #C62362E-1, engine lathe, 7.5" swing over cross slide, 3-jaw 8" chuck, 5 HP, foot brake
