Southern Fabricating Mchy Sales
Contact
About
Southern Fabricating Machinery Sales, Specializing in Used CNC Machining, Fabricating & Plastics Machinery. With an extensive working knowledge of manufacturing systems, going back over 30 years coupled with real hands on shop experience, our representatives can best assist you in locating and securing the best machinery for your application.Along with our own inventory, we can choose solutions from a close network of partners. If we don't have the solution your looking for, we will find it. We are consultants and partners, the best of both worlds as a machinery supplier! Give us a call or email us for more information. In the mean time feel free to browse our site for more great information!
Products & Services
- Brakes, Press
- Fabricating Machinery
- Grinders
- Lathes, CNC
- Machining Centers, CNC
- Plastic Equipment
- Presses
- Shears
Associations & Affiliations
641 listings in 75 categories
4-Roll Plate Bending Machines
18 Results
72" x 5/16" Akyapak #AHS-20/06, 4-rolls plate roll, digital display, 2-speed Control, #3684
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: 4-Roll Plate Bending Machines
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Akyapak
Model: AHS-20/06
6’ X 5/16" Plate Roll with Digital Display, Cone Bending Device, Two Speed Control, Induction Hardened Rolls, Torsion Bar, Separate Control Panel., Working Length: ...more
72" x 5/16" Davi #MCA-2020/S, 4-Roll Plate Roll, 8" top roll diameter, drop-end, 2019
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: 4-Roll Plate Bending Machines
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Davi
Model: MCA-2020/S
Year: 2019
5/16" X 6' 4-Roll Plate Roll with Drop-End for Easy Parts Removal and Overhead Support, Max Width: 6', Pre-Bending Capacity: 5/16", Rolling Capacity: 7/16", Top Roll Diameter: 8" ...more
72" x 3/8" Akyapak #AHS-20/08, 4-Roll plate bending roll, AK 400 CNC, 10 HP, oil cooler
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: 4-Roll Plate Bending Machines
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Akyapak
Model: AHS-20/08
⅜" X 6’ 4-Roll Plate Bending Roll with AK 400 CNC, 10 HP Motor, Oil Cooler, Variable Speeds, Ready for Side and Top Supports., Working Length: 6’Max. Thickness: ...more
72" x 3/8" Bendmak #CY4R-HHS210-20/10, 4-Roll plate roll, digital speed, variable speed
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: 4-Roll Plate Bending Machines
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Bendmak
Model: CY4R-HHS210-20
6’ X ⅜" 4-Roll Plate Roll With Cone Bending Device, Induction Hardened Rolls, Digital Display for Side Rolls, Fully Welded Steel (St-52) Construction Body, Separate Moving ...more
72" x 13/16" Bendmak #CY4R-HHS-300-20/20, 4-Roll Plate Roll
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: 4-Roll Plate Bending Machines
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Bendmak
Model: CY4R-HHS-300-2
13/16" X 6’ 4 Roll Plate Roll with Cone Bending Device, Induction Hardened Rolls, Digital Display for Side Rolls, Fully Welded ST-52 Construction, Separate Moving Control Panel ...more
Southern Fabricating Mchy Sales has 13 more listings in 4-Roll Plate Bending Machines.
2" x 2" x 1/4" Akyapak #APK-61, angle roll, digital read out, standard tools, horizontal or vertical
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Angle Bending Rolls
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Akyapak
Model: APK-61
2″ x 2″ x 1/4″ New Angle Roll with Digital Readouts, Standard Tools, Horizontal or Vertical., Voltage: 230/3/60 or 480/3/60 VoltsSpeed Rotation: Single Speed ...more
3" x 3" X 3/8" Davi #MCP9, Angle roll, hydraulic guide rolls, 9-27/32" external roll diameter, 2018
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Angle Bending Rolls
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Davi
Model: MCP9
Year: 2018
3" X 3" X ⅜" Angle Roll with Hydraulic Guide Rolls., External Roll Dia.: 9-27/32", Shafts: 3-11/32" * 3-11/32", Section Modulus: 1.9 - 1.9, Flat on ...more
3" x 3" x 3/8" Imcar #CPHV-80, Angle Roll, 2" round bar, 6.5 HP, 9.65" roll diameter, 2009
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Angle Bending Rolls
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Imcar
Model: CPHV-80
Year: 2009
3" X 3" X 3/8" Angle Roll with Separate Movable Control Panel, Correcting Rolls with Movements in 3 Dimensions and Hydraulic Adjustments of Bending Rolls, Flats Hard | Easy: 3" X 5/8" | 5" ...more
3" x 3" Bendmak #Pro80, angle roll with steel machine body, 9.64" roll diameter
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Angle Bending Rolls
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Bendmak
Model: PRO80
3 X 3 Angle Roll Machine with Machine Body of Steel (ST-52) Construction, Pro 80 Rolls are Driven by a Hydraulic Motor + Planetary Gearbox and Gears, Shafts Made of Special Steel, Hardened ...more
4" x 4" x 3/8" Akyapak #APK-101, angle roll, digital read out, hydraulic drive & guide rolls, standard tools
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Angle Bending Rolls
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Akyapak
Model: APK-101
4″ x 4″ x ⅜" New Angle Roll with Digital Readouts, Hydraulic Drive, Hydraulic Guide Rolls, Standard Tools, Horizontal or Vertical., Voltage: 230/3/60 or 480/3/60 ...more
Southern Fabricating Mchy Sales has 7 more listings in Angle Bending Rolls.
Atmosphere Gas Generators and Accessories
5 Results
2500 cu.ft./hr., South-Tek Sys #N2GEN 290S-3T2 Nitrogen generator package
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: South-Tek
Nitrogen Generator Package with 660 Gallon, 150 PSI Asme Certified Nitrogen Storage Tank, Produces a Minimum of 2,500 SCFH at a 99.95% Nitrogen Purity, Oil-free Booster System, 80 PSIG ...more
4500 cu.ft./hr., South-Tek Sys #N2GEN 350S-1T2 PSA Nitrogen generator package
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: South-Tek
Produces a Minimum of 4,500 SCFH at a 99.95% Nitrogen Purity, Nitrogen Generator Package with 1,060 Gallon, 155 PSI ASME Certified Nitrogen Storage Tank, Oil-Free Booster System, 80 PSIG ...more
6000 cu.ft./hr., South-Tek Sys #N2GEN 370S-2T2 PSA Nitrogen generator package
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: South-Tek
Produces a Minimum of 6,000 SCFH at a 99.95% Nitrogen Purity, Nitrogen Generator Package with 1,550 Gallon, 165 PSI ASME Certified Nitrogen Storage Tank, Oil-Free Booster System, 80 PSIG ...more
6500 cu.ft./hr., Amada #EZ-CUT, nitrogen generator, 217 psi, 40 HP, 30 gallon, 2010
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Amada
Year: 2010
217 PSI X 109 CFM 40 HP Nitrogen Generation System for Laser Cutting Machinery, 95% Purity Rating, Combined Compressor/Dryer, 30 Gal Receiver Tank, Manual Switch Nitrogen to Air Assist ...more
Into N2 PSA-3000, 3000 SCFH @ 500 PSI PSA Nitrogen Generator with PLC Control Panel
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Into
3,000 SCFH @ 500 PSI PSA Nitrogen Generator with PLC Control Panel, High-Pressure Boost Pump, High-Pressure Nitrogen Tank, Exhaust Muffler, (2) Carbon Molecular Sieve Tower and Upper and ...more
2-1/2" Ercolina #030, rotary mandrel bender, 2.5" x 13.75", PLC Control, 2005
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Bar, Pipe and Tube Benders
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Ercolina
Model: 030
Year: 2005
2.5" X 13.75' Rotary Draw Mandrel Bender with Easy to use PLC control capable of up to 30 Programs and 20' Table., Tube Capacity:, Mild Steel: 2 ½", Stainless Steel: 2 ...more
3" Blm Adige #E-Bender-76, cnc tube bender, 3" x 13'
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Bar, Pipe and Tube Benders
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Blm Adige
Model: E-BENDER-76
3" x 13’ CNC Multi-Axis Tube Bender with BLM VGP 3D PC Based Control, 13 Axis ( X1, Y1, Z1, 01, Y2, V1, V2, W3, W4, V4, U4, U2, U1), Max. Radius 7.87", LCD Color Screen, Function ...more
4" Hines #300NC, tube bender,.226 wall, Touch screen Control, dual stage pump hydraulic system, 2000
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Bar, Pipe and Tube Benders
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Hines
Model: 300NC
Year: 2000
4" OD X.226 Wall with Touch Screen (Proface America) Control, Dual Stage Pump Hydraulic System, Overhead Tie Bar (Eliminates Die Deflection) and Pressure Die Assist, Capacity: 4" OD X.226 ...more
Bed and Knee Milling Machines - Horizontal
1 Result
Sharp #UH3, horizontal mill, 12" x 51" table, NST 50, 1300 RPM, 7.5 HP, coolant system, boxways
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: UH3
37-3/8" x 14-13/16" x 18-1/2" Manual Horizontal Mill with NST 50, 1,300 RPM 7.5HP Spindle Drive and Power Feeds in X-Axis., STANDARD EQUIPMENT:, Coolant SystemPressurize ...more
Bed and Knee Milling Machines - Vertical
8 Results
Sharp #LMV-42, vertical knee mill, 9" x42" table, 3 HP, variable speed 60-4500 RPM, R-8 spindle
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: LMV-42
9" X 42" Capacity Vertical Milling Machine with 3HP Motor Variable Speed Drive (60-4500 RPM), R-8 Spindle, Meehanite Casting & Hard Chromed Ways, STANDARD EQUIPMENT: ...more
Sharp #LMV-42K, vertical mill package, 9" x42" tbl, 3 HP, 3-Axis digital read out, R-8, one shot lube, new
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: LMV-42K
30" x 12" x 5" Manual Vertical Mill Package with 3-Axis Digital Readout (Quill, Saddle and Table), X-Axis Powerfeed, 3HP Motor, Variable Speed Drive (60-4500 RPM), R-8 ...more
Sharp #LMV-49K-DVS, vertical mill package, 9" x49" table, 3 HP, 60-4500 RPM, R-8 Spindle
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: LMV-49K-DVS
9" X 49" Capacity Vertical Milling Machine with 3HP Motor Variable Speed Drive (60-4500 RPM), R-8 Spindle, Meehanite Casting, Chromed Ways, elf-Lubricating Motor Shaft, Abec-7 ...more
Sharp #LMV-49K-N Manual Mill, 9" x49" table, 3 HP, New
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: LMV-49K-N
9" X 49" Mill with Newall NMS 300 3 - Axis Digital Readout, X - Axis Power Feed, Digital Variable Head (DVS) Wire 220 V Only,(Transformer Needed for 440V), Hard - Chrome Ways and ...more
Sharp #LMV-50, vertical knee mill, 9" x50" table, 3 HP, 60-4500 RPM, R-8 Spindle, dual fans
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: LMV-50
9" X 50" Manual Vertical Knee Mill with 3HP Motor Variable Speed Drive (60-4500 RPM), R-8 Spindle, Dual Cooling Fans, Meehanite Casting, Chromed Ways, Self-Lubricating Motor Shaft Extends ...more
Southern Fabricating Mchy Sales has 3 more listings in Bed and Knee Milling Machines - Vertical.
37" x 60" Timesavers #3121-13-04, Abrasive Finishing Machine, 37" x 60" belt, 2007
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Belt Grinders
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Timesavers
Model: 3121-13-04
Year: 2007
37" X 60" Combination Belt / Brush Finishing Machine with Mitsubishi E700 PLC Control Two Head Wet Operation (1) Widebelt & (1) Oscillating Drum Brush, Disc Brakes on Main ...more
Boom Lifts
1 Result
500 lb. JLG #600AJ, Boomlift, 60' height, 39' reach, 12 V DC, 1999
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Boom Lifts
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Jlg
Model: 600AJ
Year: 1999
500 Lbs Capacity Boomlift, Maximum Weight: 500 Lbs, Maximum Height: 60’, Maximum Reach: 39’, Platform Rotation: 180°, Turn Radius (Inside): 10’11", Turn Radius ...more
Boring Mills, Horizontal, Table Type
2 Results
4.5" Ingersoll, single spindle boring mill, 10' x12' x24', manual pendant, 100 HP, 22" quill
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Boring Mills, Horizontal, Table Type
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Ingersoll
10’ X 12’ X 24’ Horizontal Boring Mill With Manual Pendant ,Controller, 100 HP Spindle Drive With 22" Dia. Quill And Integrated Flood Coolant System., Capacity: ...more
7" Ingersoll, horizontal boring mill, 120" x 144" x 288", (2) hydraulic clamp fixture, 7.5 HP, pendant, 1953
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Boring Mills, Horizontal, Table Type
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Ingersoll
Year: 1953
4' 10" X 21-½’ Horizontal Boring Mill with Two (2) Hydraulic Clamping Fixtures, Adjustable Clamping Rail, Each Fixture is Pendant Operated Through Push Buttons and Selector ...more
10 Ton, Quantum #BM25 Nargesa Hydraulic Broaching Machine, 2017
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Broaching Machines
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Quantum
Model: BM25
Year: 2017
10 Ton Broaching Machine with Assorted Broaches, Hydraulic Power: 10 Tons, Gooseneck: 11.80", Max. Broaching Capacity: 1" = 25mm, Working Speed: 0.94" per second = 24mm/s, Return Speed: ...more
C Frame Hydraulic Press Machines (Gap Frame)
2 Results
200 Ton, Niagara #S2G-200-60-30, 10" stroke, 24" shut height, 6" ram adj., 30 SPM, 60" x 30" bed, 1982
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Niagara
Model: S2G-200-60-30
Year: 1982
200 Ton Double Crank Gap Frame Press with Palm Buttons, Air Clutch & Brake, Air Counterbalance, Floor Standing, T-Slotted Ram and Bolster, Stroke: 10", Shut Height: 24", Powered Ram ...more
300 Ton, Standard Industrial #DC300, C-frame press, 12" stroke, 14" throat, 2 hand controls
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Standard
Model: DC300
300 Ton Press with Two Hand Controls, Hydraulic Tonnage Control, Full Tonnage Throughout Stroke, Counterbalance Valve For Punching and Magnetic Starter with Over & Under Voltage ...more
Carbide, Friction and Cold Saws
2 Results
5.5" Quantum #MACC-TA-400-A, Fully-automatic Aluminum Cutting Saw, 2017
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Carbide, Friction and Cold Saws
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Quantum
Model: MACC-TA-400-A
Year: 2017
5.5" Capacity Fully-Automatic Non-Ferrous Aluminum Cutting Saw with 3,000 RPM Blade Speed, Two Pneumatic Vices and Bar Support Arm with Bar Stop, Maximum Vice Opening: 7", Round Tube ...more
7" x 2-3/4" Hyd-Mech #PNF350-2, CNC Cold Saw, Pivot Arm, 2012
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Carbide, Friction and Cold Saws
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Hyd-Mech
Model: PNF350-2
Year: 2012
7" X 2 3/4" Cold Saw with Automatic Programmable and Pivot Arm Cold Saw, Power: 2.5 HP, Round Hollow: 90° 4 3/4", Square Hollow: 90° 4", Rectangular Hollow: ...more
3" DoAll #SC-75A, circular saw, 30-150 RPM, 15 HP, 11.2" blade, automatic chip conveyor, new
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Circular Saws
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Doall
Model: SC-75A
0.3-2.36" Circular Saw with Floating Shuttle Device Hydraulic Sorting Chute Electromagnetic Power Brake Automatic Chip Conveyor Powered Band Brush Air Blow Device for Tube Cutting Automatic ...more
3.15" DoAll #SC-100A, circular saw, PLC, 30-150 RPM, 15 HP, 14.2" blade, automatic chip conveyor, new
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Circular Saws
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Doall
Model: SC-100A
0.39" x 3.15" Circular Saw with PLC Control for All Electric and Hydraulic Functions Easy Conversational HMI Infinitely Variable Blade Speed Controlled by Inverter Hydraulic Front & ...more
6" DoAll #SC-150A, circular saw, 30-150 RPM, 20 HP, 18" blade, hydraulic front & vertical vises, new
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Circular Saws
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Doall
Model: SC-150A
2.6-4" x 2.6-4" Circular Saw with Hydraulic Front & Vertical Vises Floating Shuttle Device Hydraulic Sorting Chute Electro-Magnetic Power Brake Automatic Chip Conveyor Powered Band ...more
CNC Bar, Pipe and Tube Benders
5 Results
1" Eaton Leonard #VB100HP, Premier 4.01.68 Multi-Axis Control, Operator Control Console, 1993
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Bar, Pipe and Tube Benders
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Eaton Leonard
Model: VB100HP
Year: 1993
1.00" X.120" CNC Hydraulic Rotary Tube Bending Machine with Premier 4.01.68 Multi-Axis CNC Control, Operator Control Console (Separate Free Standing), Drop-Away Clamp Die Holder., Capacity ...more
2.1" Blm Adige #Dynam3, CNC Tube Bender, VGP 3D Controls, 2007
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Bar, Pipe and Tube Benders
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Blm Adige
Model: DYNAM3
Year: 2007
2.5" X.12" CNC Tube Bender with VGP 3D Controls, Left or Right Hand Capable, Variable Radius Rolling., Max Capacity: 2.5" X.12", Tube Length: 150", Bneder Dimensions: ...more
2.5" Bendmak #BT-BM76, CNC 3 Tube Bending Machine, 11 gauge, servo controlled bending
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Bar, Pipe and Tube Benders
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Bendmak
Model: BT-BM76
2-½" X 11ga Tube Bending Machine with Servo Controlled Bending, Feeding, Shifting & Turning Axis, Step by Step and Fully Automatic Working Capability, Capability to work with ...more
2.5" Bendmak #BT-BM76 CNC1, Mandrel Tube Bender with Foot Pedal Control, Servo Controlled Bending, new
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Bar, Pipe and Tube Benders
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Bendmak
Model: BT-BM76
2-1/2" X 0.120" Mandrel Tube Bender with Foot Pedal Control, Servo Controlled Bending, Feeding, Shifting and Turning Axes, Operational Ability With and Without Mandrel, Spiral Bending ...more
3" x .083" Ercolina #EB76CNC6V5, Tube Bending Machine, 2013
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Bar, Pipe and Tube Benders
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Ercolina
Model: EB76CNC6V5
Year: 2013
3" X.083" Tube Bending Machine with Interactive Touch Screen with Auto and Manual Operating Modes, Independent Pressure & Clamp Die Adjustments, Programmable Carriage Movement For Tight ...more
CNC Beam/Drill Lines
13 Results
Akyapak #3ADM-1200, CNC Drill Line, 50" x 20", 3-spdl, 15" touch screen Mitsubishi C70 Control, Infeed & Outfeed Conveyors
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Beam/Drill Lines
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Akyapak
Model: 3ADM-1200
50" X 20" 3 Spindle Drill Line with 15" Touch Screen Mitsubishi C70 CNC Control or Siemens Sinumerik 840D SL CNC Control, Infeed & Outfeed Conveyors (Standard ...more
Akyapak #AFD07, Plate Drilling Machine, Mitsubishi M70 V Control, New
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Beam/Drill Lines
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Akyapak
Model: AFD07
27.6" X 49.2" X 1 - 9/16" Structural Plate Drilling Machine with Mitsubishi M70 V Control, 30 HP Motor, Automatic Tool Changing, Vertical Drilling Unit, BT 40 Conical Unit. ...more
Akyapak #AFD10, Plate Drilling Machine, Mitsubishi M70 V Control, 30 HP, New
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Beam/Drill Lines
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Akyapak
Model: AFD10
3’ X 5’ X 2-1/2" Structural Plate Drilling Machine with Mitsubishi M70 V Control, 30 HP Motor, Automatic Tool Changing, 1 Vertical Spindle, BT 40 Conical Tool., Min. Plate ...more
Akyapak #Meteor-1200, Beam Drill, 48" x 48", Akyapak ADL Motion Control, 1ADL 1200 CNC Drilling
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Beam/Drill Lines
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Akyapak
Model: METEOR-1200
48" X 48" Beam Drill with Akyapak ADL Motion Control System, 1ADL 1200 CNC Drilling, Minimum Quantity Lubrication, 3 Axis Servo Motors, 20 HP Spindle Motor Power, Automatic Tool ...more
Bendmak #B1DL-1200, 47" x 78" Single Spindle Drill Line with Advanced Full Siemens CNC
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Beam/Drill Lines
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Bendmak
Model: B1DL-1200
47" X 60' Capacity Single Spindle Drill Line with Advanced Full Siemens CNC, 20 HP Spindle Motor, 6 - Station Tool Changer, Beam Flippers and Robust Clamping., Controller: ...more
Southern Fabricating Mchy Sales has 8 more listings in CNC Beam/Drill Lines.
CNC Cylindrical Grinders
1 Result
12.6" x 36" Okamoto #OGM-1236UNCB, 400 IPM, 2k RPM, 7.5 HP, Fanuc 21i-TB Control, 2008
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Cylindrical Grinders
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Okamoto
Model: OGM-1236UNCB
Year: 2008
12.6" X 36" Cylindrical CNC Grinder with Fanuc 21i-TB CNC Control, Two Axis Simultaneous CNC Control, and Wheelhead (X Axis) Stroke of 11.8", Swing Over Table: 12.6", Distance Between ...more
22" x 80" Sharp #2280NC, flat bed turning center, Fagor CNC Control, 3.38" spindle bore, 2016
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Engine Lathes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: 2280NC
Year: 2016
22" X 80" Flat Bed NC Turning Center with Fagor CNC Controller, 3.38" Spindle Bore, 10 HP Geared Head Motor, 4 - Position Toolpost, Conversational Software and Teach Mode. ...more
55" x 157" Saro #Saro10, CNC Lathe, 4.13" spdl bore, Siemens 840C Control, 1998
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Engine Lathes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Saro
Model: SARO10
Year: 1998
55.18" X 55.18" X 157.48" Flat Bed CNC Lathe with Siemens 840C CNC Control, 37/68 HP Spindle Motor, 4 Position Turret, 31.5" - 4 Jaw Manual Chuck, Heavy Duty Tailstock and a Set Of Steady ...more
CNC Folding Machines (Folders)
4 Results
120" Baileigh #BB-12014H, CNC folding system, 14 gauge, adj. angle auto-stop, foot pedal, new
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Folding Machines (Folders)
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Baileigh
Model: BB-12014H
14 Gauge X 18’ Folding System with Adjustable Angle Auto-Stop Foot Pedal 26 Hardened Fingers Fully-Welded Steel Frame and Support Rods., Motor: 3 hpMin Reverse Bend:.5"Thickness (SS): ...more
120" Ras #73.30 Flexibend, CNC Folding Machine, 2015
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Folding Machines (Folders)
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Ras
Model: 73.30 FLEXIBEND
Year: 2015
16 Gauge X 10’ CNC Folder with RAS Series 600 Touch Screen Control and Selection of Goatsfoot Tooling, Max Thickness: 1.5 MM, Max Thickness (Gauge): 16 Gauge, Overall Length: 10' ...more
144" Baileigh #BB-12010H-NC, 10 gauge, 135 Degrees bend, semi-auto, adj.auto-stop, foot pedal, new
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Folding Machines (Folders)
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Baileigh
Model: BB-12010H-NC
10 Gauge X 12’ Folding System with Manual or Semi-Automatic Mode Degree Adjustment Auto-Stop Foot Pedal 26 Hardened Fingers Industrial-Grade Hydraulics Greasable Joints Filtered ...more
Tennsmith #SBS126-14, 14 gauge x 10' CNC Folder with Synergy Control Systems, 2018
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Folding Machines (Folders)
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Tennsmith
Model: SBS126-14
Year: 2018
14 Gauge X 10' CNC Folder with Synergy Control Systems, Twin Motor Drive System For The Folding Beam, All Three Drive Systems Of The SBS Series and Back Gauge is Controlled By Frequency ...more
CNC Horizontal Boring Mills - Table Type
3 Results
4.3" Toshiba #BTD-200QF, Horizontal Boring Mill, 39.4" x 39.4" table, Tosnuc 888 CNC Control, 2006
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Toshiba
Model: BTD-200QF
Year: 2006
39.4" X 39.4" Horizontal Boring Mill with Tosnuc 888 CNC Control, Spindle Size: 4.3", X - Axis Travels: 39.4", Y - Axis Travels: 39.4", Power: 20 HP, Spindle ...more
5.12" SNK Ikegai #NB130P, CNC horizontal boring mill, 137.8" X, 98.42" Y, 62.99" Z, Fanuc 16iM, coolant thru spindle, 1998
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Snk
Model: NB130P
Year: 1998
137.8" X 98.42" X 62.99" Horizontal Boring Mill with Fanuc 16im CNC Control, Built-in "B" Axis Rotary Table, Coolant Thru Spindle and Telescoping Way Covers Chip Conveyor, Spindle Diameter: ...more
Toshiba #BP130.P40, horizontal boring mill,Tosnuc 888 CNC Ctrl,2006
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Toshiba
Model: BP130.P40
Year: 2006
160" X 100" X 55" HBM with Tosnuc 888 CNC Control, 38 Station Tool Changer, Angle Plates and Chip Conveyor, Table Working Surface: 70" X 155", X Travel: 160", Y Travel: 100", Z Travel: 55" ...more
Amada #FO3015, 4000 watt, 5' x 10', Fanuc 16iL, chiller, turbo blower, vacuum pump, 2002
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Lasers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Amada
Model: FO3015
Year: 2002
5’ X 10’ 4KW Laser Cutting System with Fanuc Controller, Fanuc AF4000E 4000 Watt (4KW) Laser Resonator, Chiller, Turbo Blower and Vacuum Pump, Transformer., Resonator: 4,000 ...more
Amada #FO3015NT, laser cutting system, 1000 watt, 5' x10', dual pallet, Amada AMNC/F controller, 2004
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Lasers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Amada
Model: FO3015NT
Year: 2004
5' X 10' 4.0KW CO2 CNC Laser Cutting System with Amada AMNC/F CNC Controller, Fanuc C4000i Resonator, Chiller, Farr Dust Collector, Dual Pallet and Pull Out Scrap Containers. ...more
Amada #FO3015NT, 4000 watt, Amada AMNC/F controller, chiller, dust collector, 2004
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Lasers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Amada
Model: FO3015NT
Year: 2004
5’ X 10’ 4KW Laser Cutting System with Amada AMNC/F CNC Controller, Fanuc C4000i-C 4000 Watt (4KW) Laser Resonator, Chiller, Dust Collector., Maximum Cutting Size: 5 X 10’ ...more
Amada #LC3015F0NT, CO2 laser, 5' x 10, AMNC-F controller, dust collector, dual shuttle table, 2006
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Lasers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Amada
Model: LC3015F0NT
Year: 2006
5’ X 10’ CO2 Laser Cutting System with Amada AMNC-F Controller, Farr Gold Series Dust Collector, Dual Shuttle Table, Chiller, High Pressure Assist Gas., Wattage Capacity: 4000 ...more
Amada #LC3015F1NT, 4000 watt, 5' x 10', Amada AMNC-F, dust collector, dual shuttle, 2011
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Lasers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Amada
Model: LC3015F1NT
Year: 2011
5’ X 10’ CO2 Laser Cutting System with Amada AMNC-F Controller, Dust Collector, Dual Shuttle Table, Chiller, high Pressure Assist Gas., Capacity: 4,000 WattsStainless Steel ...more
Southern Fabricating Mchy Sales has 43 more listings in CNC Lasers.
Daewoo Doosan #Puma-300GL, 23.2" swing, 12" chuck, 25" centers, Fanuc 18iT, 10 position turret, chip conveyor, gantry system, 2000
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Lathes and Turning Centers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Daewoo Doosan
Model: PUMA-300GL
Year: 2000
15.7" Turning Diameter CNC Turning Center with Fanuc 18IT Control, 12" Pratt and Burnerd Quick Change Chuck, 10 Position Turret, 1 Piece O.D. Holders, 6 Piece 2" I.D. ...more
Emag #VL3-Duo, CNC Turning Center, 8" chuck, 12 post tool turret, 2017
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Lathes and Turning Centers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Emag
Model: VL3-DUO
Year: 2017
6" X 4.5" CNC Turning Center with 2 Main Spindles and 12 - Post Tool Turret, Workpiece Diameter: 6", Workpiece Length: 4.5", Chuck Diameter: 8.5", X - Axis Travel: 20", Z - Axis Travel: ...more
Eurotech #Trofeo-B465-SY2, CNC turning center, 8" chuck, 2.5" bar, mist collector, tool holders
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Lathes and Turning Centers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Eurotech
Model: TROFEO-B465-SY2
8" X 20" CNC Turning Center with Tool Holders, High Pressure, Mist Collector, LNS Chip Conveyor and Transformer., Max Bar Capacity: 2.56", Max Turning Diameter: 8", Max ...more
Fryer #SL-8, CNC lathe, 20" swing, 2" bar, 12" turn diameter, 4200 RPM, Touch Screen Control, chip conveyor, tailstock, 30 HP, 2019
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Lathes and Turning Centers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Fryer
Model: SL-8
Year: 2019
20" X 12"-19" Between Centers, CNC Turning Center with Touch Screen Control, 4200 RPM at 30 HP, 2" Bar Capacity, Chip Conveyor and Tailstock are Included., Swing Over Bed: ...more
Genturn #52CS, CNC Lathe, new
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Lathes and Turning Centers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Genturn
Model: 52CS
2" X 4.33" CNC Lathe with Traub TRB 52 Dead Length Collet on Main Spindle, Traub TRB 42 Dead Length Collet on Sub Spindle, Programmable External Air Blast on Both Spindles ...more
Southern Fabricating Mchy Sales has 17 more listings in CNC Lathes and Turning Centers.
CNC Plasma Cutting Systems (Flame Cutters)
28 Results
AKS #Dura-kut, 10' x 40' Dual Head Plasma Cutter wDual Head Plasma Cutter, Hypertherm EDGE Connect controller, 2021
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Aks
Model: DURA-KUT
Year: 2021
10' X 40' Dual Head Plasma Cutter with Hypertherm EDGE Connect CNC Controller Unit, Hypertherm XPR300 Power Source, Hypertherm VWI Vented Water Injection Console, Robo-kut 5 - Axis ...more
AKS #Plasmatic, 5' x 10' CNC plasma table, Hypertherm Pro 19" Touchscreen Operator Control
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Aks
Model: PLASMATIC
5’ X 10’ CNC Plasma Table with Hypertherm Pro 19" Touchscreen Operator Control, Helical Rack & Pinion and Dual Driven Y-Axis Bridge, Magnetic Breakaway Head, Tucked ...more
AKS #Plasmatic, 5' x 10' CNC plasma table, Hypertherm Pro 19" Touchscreen Control, Helical rack
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Aks
Model: PLASMATIC
5’ X 10’ CNC Plasma Table with Hypertherm Pro 19" Touchscreen Operator Control, Helical Rack & Pinion and Dual Driven Y-Axis Bridge, Magnetic Breakaway Head, Tucked ...more
AKS #Plasmatic, 5' x 10' CNC plasma table, Hypertherm Pro 19" Touchscreen Control, 800 IPM
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Aks
Model: PLASMATIC
5’ X 10’ CNC Plasma Table with Hypertherm Pro 19" Touchscreen Operator Control, Helical Rack & Pinion and Dual Driven Y-Axis Bridge, Magnetic Breakaway Head, Tucked ...more
AKS #Plasmatic, 5' x 10' CNC plasma table, Hypertherm Pro 19" Touchscreen Operator
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Aks
Model: PLASMATIC
5’ X 10’ CNC Plasma Table with Hypertherm Pro 19" Touchscreen Operator Control, Helical Rack & Pinion and Dual Driven Y-Axis Bridge, Magnetic Breakaway Head, Tucked ...more
Southern Fabricating Mchy Sales has 23 more listings in CNC Plasma Cutting Systems (Flame Cutters).
175 Ton, Controlled Automation #2AT-175, heavy duty plate punching system, 2008
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Plate Punching Machine
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Controlled Automation
Model: 2AT-175
Year: 2008
5’ X 10’ X 175 Ton Heavy duty Plate Punching System designed for Stringer, Base Plates, Clips/Angle Punching and More. Includes AC Controlled PC Based Controller, 560" ...more
CNC Power Squaring Shears (Inch)
2 Results
1/2" x 10' Piranha #1/2-10, CNC hydraulic shear, 39" BG, Delem DAC 360 Control, 20 HP, new
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Power Squaring Shears (Inch)
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Piranha
Model: 1/2-10
1/2" X 10’ CNC Hydraulic Guillotine Style Shear with Delem DAC 360 Controller, Overload Protection, CNC Blade Gap Adjustment, CNC Rake Angle Adjustment, Leuze Light ...more
5/8" x 13' Piranha #5/8-13, CNC hydraulic guillotine style shear, 39" BG, Delem DAC 360, new
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Power Squaring Shears (Inch)
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Piranha
Model: 5/8-13
5/8" X 13’ CNC Hydraulic Guillotine Style Shear with Delem DAC 360 Controller, CNC Blade Gap Adjustment, CNC Rake Angle Adjustment, Leuze Light Curtain/Photocell Switch, 3 Front ...more
25 Ton, Accurpress #7254, CNC hydraulic press brake, 4' overall, 50" between housing, Accurpress ETS 3000 3-Axis Control
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Press Brakes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Accurpress
Model: 7254
25 Ton X 4’ CNC Hydraulic Press Brake with Accurpress ETS 3000 3 - Axis CNC Controller, 3 - Axis Back Gauge with Y, X & R Programmability, Foot Pedal or Palm Pedestal Operation ...more
27.5 Ton, DiAcro Promecam #RG25, CNC press brake, 4' overall, 40" between housing, full length die holder, 1983
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Press Brakes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Diacro
Model: RG25
Year: 1983
27.5 Ton X 4’ CNC Up-Acting Hydraulic Press Brake with NC Control, Full length Die Holder, Extended Punch Clamps and Remote Footswitch Control., Make: DiAcro by PromecamModel: ...more
35 Ton, Adira #QHA-3220, Hydraulic Brake, 6' overall, 61" between housing, 4" stroke, Hurco Autobend 6 Control, 1997
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Press Brakes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Adira
Model: QHA-3220
Year: 1997
35 Ton X 6' Hydraulic Press Brake with Hurco Autobend 6 Control Two Axis Back Gauge, Sectional Ram Die Clamps (10 Universal Die Adapters), Push Buttons for Start - Stop, Key Selector ...more
36 Ton, Amada #FM-B-3613GNT, Electl Press Brake, 4.2' overall, 37.79" between housing, AMNC controller, 5-Axis Back Gauge
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Press Brakes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Amada
Model: FM-B-3613GNT
36 Ton X 52.28" Electrical Press Brake with AMNC CNC Controller, 5 - Axis Backgauge (X1, X2, Z1, Z2, R), Servo Driven System and Intelligent Foot Pedal., Nominal Force: 36 Tons, Table ...more
38 Ton, Guifil #PE-15-35, 5' overall, 48" between housing, 3.9" stroke, 1990
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Press Brakes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Guifil
Model: PE-15-35
Year: 1990
38 Ton X 5’ CNC Hydraulic Press Brake with Autogauge CNC 1000 Controls and Autogauge G24 Heavy Duty Backgauge, Nominal rated capacity: 38.5 Tons, Overall length of bed and ram: 60" ...more
Southern Fabricating Mchy Sales has 47 more listings in CNC Press Brakes.
Axyz #Pacer-4012, CNC Router, 40" X, 144" Y, 10.8 HP, Mister, automatic squaring, automatic tool changer, 2015
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Routers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Axyz
Model: PACER-4012
Year: 2015
5' X 12' CNC Router with Mister, Auto Squaring, HC Pressure Foot, Cold Gun, Automatic Tool Changer and Busch Minke 1252 Vacuum Pump, Table Dimensions: 60" X 144", X - Axis: 40", Y - ...more
AXYZ #Panelbuilder-5018, CNC Router, 72" X, 216" Y, 6" Z, 5 HP, 24000 RPM, A2MC Smart Console CNC controller, 2020
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Routers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Axyz
Model: PANELBUILDER-5018
Year: 2020
6' (72″) X 18' (216″) X 6″ Tri-Headed CNC Router Systems with A2MC Smart Console CNC Controller, (3) 5HP 24KRPM ELTE Spindles, (3) EZ Ryder, Barcode Reader ...more
Komo #Innova-510, CNC Router, 5' x 10' table, GE/Fanuc CNC Control, 12 HP, 6000-18000 RPM, 1998
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Routers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Komo
Model: INNOVA-510
Year: 1998
5’ X 10’ 3 - Axis CNC Router with GE / Fanuc CNC Control Fixed Bridge, Moving Table, 12 HP, 6,000 - 18,000 RPM, 8 Position Automatic Tool Changer, 40 HP, Vacuum Pump, (11) ...more
Komo #Innova-VR408, 3-Axis CNC Router, 4' x 8', GE/Fanuc CNC Control Fixed Bridge, Moving Table, 12 HP, 6000-18000 RPM, 8 Position Tool Changer, 1998
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Routers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Komo
Model: INNOVA-VR408
Year: 1998
4' X 8' 3-Axis CNC Router with GE/Fanuc CNC Control Fixed Bridge, Moving Table, 12 HP, 6000-18,000 RPM, 8 Position Tool Changer, Quincy Vacuum Pump., Table Size, Cast Aluminum: 49" ...more
Komo #XL-524, cnc router, 5' x 24', 288" X, 60" Y, 18" Z, 12 ATC, 23 HP, 24k RPM, 2015
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Routers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Komo
Model: XL-524
Year: 2015
5' X 24' CNC Router with Fanuc Controls, Single Head Mist, Interpolating C - Axis, Liquid Cooled Spindle, Fan Cooled, Automatic Lubrication System and Four Pole Electro-Spindle, X - ...more
Southern Fabricating Mchy Sales has 2 more listings in CNC Routers.
CNC Turret Punch Press Machine
18 Results
20 Ton, Amada #Aries-245, Turret Press, Amadan 04PA CNC Control with CRT, 1993
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Turret Punch Press Machine
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Amada
Model: ARIES-245
Year: 1993
20 Ton X 39.37" X 50" Turret Press with Amadan 04PA CNC Control with CRT, Punching Capacity: 22 US / 20 Metric Tons, Max Traverse: 39.37" X 50", Max Sheet Size (W/ 1 Reposition): 39.37" X ...more
20 Ton, LVD Strippit #Global-20-1215, turret punch, 30 station, GE Fanuc Series 180i-PB, 2005
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Turret Punch Press Machine
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Lvd
Model: GLOBAL-20-1215
Year: 2005
20 Ton 101.4" X 52.6" Turret Punch with GE Fanuc Series 180i-PB Control, 30 Stations, Standard Auto Index, Roller Ball Table and Machine Cooling System., Capacity: 20 Tons, Stock ...more
20 Ton, Strippit #P1225, CNC turret punch, Fanuc Series Oi-PC CNC Controller, 21 Station Thick Style Turret with 3 AI (Auto-Index) Stations, 2006
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Turret Punch Press Machine
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Strippit
Model: P1225
Year: 2006
49.21" X 98.4" X 20 Ton CNC Turret Punching System with Fanuc Series Oi-PC CNC Controller, 21 Station Thick Style Turret with 3 AI (Auto-Index) Stations, Brush Type Table and All ...more
22 Ton, Nisshinbo #Map-1000, turret punch, 22 station turret, 2 automatic index, 39.37" x 99.2" traverse, 1994
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Turret Punch Press Machine
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Nisshinbo
Model: MAP-1000
Year: 1994
39.37" X 99.2" X 22 TON CNC Turret Punching System with Nsshinbo Palvision CNC Control System, Bi-Directional 22 Position Thick Style Turret, 2 Auto Index Stations, Multi Tool ...more
22 Ton, Strippit #LVD-ST-1225, 49" x 98", Fanuc 18P Control, 29 station, 2007
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Turret Punch Press Machine
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Strippit
Model: LVD-ST-1225
Year: 2007
49.21" X 98.4" X 22 Ton 1/4" Material Capacity CNC Turret Punching System with Fanuc 18P CNC Controller, 29 Station Thick Style Turret with 3 AI (Auto-Index) Stations and ...more
Southern Fabricating Mchy Sales has 13 more listings in CNC Turret Punch Press Machine.
CNC Vertical Bed Mills
5 Results
Sharp #LMV-50/MP-3, Vertical Mill Package, 9" x50" table, 3 HP
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Vertical Bed Mills
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: LMV-50/MP-3
STANDARD EQUIPMENT:, Automatic Lube SystemHard-crome waysFront and rear way coversTool Kit includes:Machine manual, Half nut wrench, Wrench 17, & 19m, Set of 6 Allen wrenches ...more
Sharp #LMV-PM-2, Vertical Mill, 9" x42" table, 3 HP
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Vertical Bed Mills
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: LMV-PM-2
STANDARD EQUIPMENT:, Hard-chrome waysFront and rear way coversAutomatic Lube SystemTool Kit includes:, Machine manual, Half nut wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip ...more
Sharp #TMV-I/MP-3, Vertical Mill Package, 10" x50" table, 5 HP
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Vertical Bed Mills
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: TMV-I/MP-3
STANDARD EQUIPMENT:, Manual Draw BarHardened and Ground Box ways.Front and rear way coversAutomatic Lube SystemTool Kit includes:Machine manual, Half nut wrench, Wrench 17m, 19m, Set of 6 ...more
Sharp #TMV/MP-2, Vertical Mill, 10" x50" table, 3 HP
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Vertical Bed Mills
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: TMV/MP-2
STANDARD EQUIPMENT:, Manual Draw BarHardened and Ground BoxwaysFront and rear way coversAutomatic Lube SystemTool Kit includes:Machine manual, Half nut wrench, Wrench 17m, 19m, Set of 6 ...more
Tree #Journeyman-325, Vertical Mill, 10" x44" table, 27" X, 14" Y, 6" Z, 50-6000 RPM, 1985
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Vertical Bed Mills
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Tree
Model: JOURNEYMAN 325
Year: 1985
27" X 14" X 6" CNC Milling Machine with Dynapath Controls, CAT 40 Spindle Taper., Overall Table Size: 10" X 44", Max. Weight on Table: 500 Lbs, Quill Diameter: ...more
CNC Vertical Boring Mills – including VTLs
3 Results
60" Gray vertical turret lathe, dual ram, 74" swing, 70" table diameter, 70" under rail, Fanuc 18iTT CNC 4-Axis, 2006
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Vertical Boring Mills – includin...
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Gray
Year: 2006
4 Axis, Dual Ram VTL with a 70" Table and 74" Swing. The Table can Handle up to a 40,000 Pound Part with a 75 HP Spindle Motor and a Max. Speed of 228 RPM., Control: Fanuc 18iTT ...more
68" Olympia #V60L, 70" swing, 66" chuck, 50 HP, 350 RPM, Fanuc 180i-T, 1999
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Vertical Boring Mills – includin...
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Olympia
Model: V60L
Year: 1999
68" X 40" Live Tool VTL with Fanuc 180i-T CNC Control, 50 HP at 350 RPM, 32 Tool ATC and Moveable Rail, CAT 50 Live Tooling with 2500 RPM, C Axis and Chip Conveyor, Swing: 70", Machining ...more
108" Giddings & Lewis, vertical turret lathe, live spindle, 120" sw, 72" under rail, G & L 8000 CNC Control, 1993
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: CNC Vertical Boring Mills – includin...
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Giddings & Lewis
Year: 1993
120" X 72" Capacity CNC Vertical Live-Tool Turning Center with G&L 8000 CNC Controller, 100HP Table Drive, C Axis (360,000 Positions – Full Contouring), Elevating Cross ...more
Coordinate Measuring Machines (CMM)
5 Results
Brown & Sharpe #Global-Image-15.22.10, coordinate measuring machine, 59" X, 86" Y, 39" Z, Hexagon B3C controller w/Jog box, 2004
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Coordinate Measuring Machines (CMM)
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Brown & Sharpe
Model: GLOBAL-IMAGE-15.22.10
Year: 2004
Travels: X-Axis: 59", Y-Axis: 86", Z-Axis: 39", Hexagon B3C Controller with Jog Box, Reference Sphere, New Computer System., X-Axis: 59"Y-Axis: 86"Z-Axis: 39", INCLUDES: Hexagon B3C ...more
Brown & Sharpe #Global-Image-5.7.5, Coordinate Measuring Machine, 2003
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Coordinate Measuring Machines (CMM)
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Brown & Sharpe
Model: GLOBAL-IMAGE-5.7.5
Year: 2003
19.7" X 27.5" X 19.7" Coordinate Measuring Machine with Renishaw PH10-2 Controller, Renishaw PH10M Probe Head, Renishaw TP-20 STD Force Probe Tips, Probe Change Rack ...more
Brown & Sharpe #Global-Image-9.12.8, coordinate measuring machine, Renishaw PH10MQ Probe, SP25 Probe Head, PC-DMIS CAD++ Software (2019 available), 2005
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Coordinate Measuring Machines (CMM)
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Brown & Sharpe
Model: GLOBAL-IMAGE-9.12.8
Year: 2005
X-Axis: 35.4", Y-Axis: 47.2", Z-Axis: 31.5", Renishaw PH10MQ Probe, SP25 Probe Head, Calibration Sphere, Computer/Monitor, X-Axis: 35.4"Y-Axis: 47.2"Z-Axis: 31.5", INCLUDES: Renishaw PH10MQ ...more
DEA #Delta-306320, coordinate measuring machine, B3C Controller, Renishaw PH10M Probe Head, Renishaw TP20 Touch Probe, 2008
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Coordinate Measuring Machines (CMM)
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Dea
Model: DELTA-306320
Year: 2008
X-Axis: 118.11", Y-Axis: 248.03", Z-Axis: 78.74" :, B3C Controller, Renishaw PH10M Probe Head, Renishaw TP20 Touch Probe, PC-DMIS CAD++, X-Axis: 118.11"Y-Axis: 248.03"Z-Axis: ...more
ViciVision Optical Measuring Machine, Computer, Monitor & Software, 11" x 2.3", Full Set of Users Manuals and Collets and Tooling Accessories, 2019
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Coordinate Measuring Machines (CMM)
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Vicivision
Year: 2019
11" X 2.3" Optical Measuring Machine with Computer, Monitor & Software, Full Set of Users Manuals and Collets and Tooling Accessories, Largest Measurable Piece: 300mm X 60mm ...more
Simec #SB3000S, adjustable length, 4" wire brush, 1.5"-4" tube diameter, 6"-10' tube length, 2002
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Deburring Machines
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Simec
Model: SB3000S
Year: 2002
4" Capacity Tube Surface Finishing Machine with Simec Adjustable Length 4" Wire Brush, Notched Guide Rails, Automatic Chain Feed Conveyor, Hand Wheel Adjustment., Capacity: 1-1/2" ...more
Double Cranked Back Gear OBI Press Machines
1 Result
200 Ton, Niagara #S2G-200-60-42, 8" stroke, 22" shut height, 60 SPM, variable speed, 60" x 42" bed, air cooled, 1982
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Niagara
Model: S2G-200-60-42
Year: 1982
200 Ton Double Crank Gap Press with Palm Button Stand, Air Clutch & Brake, Air Counterbalances, 6" T-Slotted Bolster and T-Slotted Ram, Capacity: 200 Ton, Stroke: 8", Shut ...more
15 Ton, Whitney #615, hydraulic punch, 36" throat, 120 SPM, dual electric foot pedal
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Duplicating Punches
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Whitney
Model: 615
54" X 53" 15 Ton Manual Hydraulic Punching System with Duplicator Attachment, Dual Electric Foot Pedal & Assortment Of Punches & Dies, Capacity: 15 TonsThroat: ...more
11" x 18" Sharp #1118H, precision toolroom lathe, 5 HP, splash guard, coolant system
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Engine Lathes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: 1118H
11" x 18" Precision Toolroom Lathe with 5HP 4,000 RPM DIGITAL VARIABLE SPEED (D.V.S.) Drive System, 50 Millionth Tir Accuracy, Harding Type Design, Hardened and ground spindle, Independent ...more
13" x 40" Sharp #1340VS, manual engine lathe, 2000 RPM, 3 HP, 3-Jaw 8" chk, Steady Rest, coolant system
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Engine Lathes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: 1340VS
13" X 40" Capacity Manual Engine Lathe with 2000 RPM 3HP Drive, D1-4 Camlock Spindle, 8" 3 Jaw Chuck, Gap Bed Frame, Single Phase Electrics, Coolant System Foot Brake and Tailstock. ...more
13-3/8" x 40" Turnmaster #1340, Engine Lathe, 70-2500 RPM, inch/metric threading, 1989
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Engine Lathes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Turnmaster
Model: 1340
Year: 1989
13 - 3/8" X 40" Engine Lathe with 3 - Jaw Chuck, Lever Operated Collet Closer, Coolant System, Worklight, Quick Change Toolpost with Holders, Thread Dial, Foot Brake and One Shot ...more
14" x 40" Sharp #1440F, precision geared head manual engine lathe, 3-Jaw 8" chuck
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Engine Lathes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: 1440F
14" X 40" Capacity Manual Engine Lathe with 1,800 RPM 3HP, 2-Speed Gear Drive, D1-4 Camlock Spindle, 8" 3 Jaw Chuck, Gap Bed Frame, Single or 3 Phase Electrics, Coolant System Foot Brake ...more
14" x 40" Sharp #1440V, precision variable speed manual engine lathe, 3-Jaw 8" chuck
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Engine Lathes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: 1440V
14" X 40" Capacity Manual Engine Lathe with 2,200 RPM 3HP, Infinitely Variable Drive, D1-4 Camlock Spindle, 8" 3 Jaw Chuck, Gap Bed Frame, Single or 3 Phase Electrics, Coolant System Foot ...more
Southern Fabricating Mchy Sales has 8 more listings in Engine Lathes.
Finishing Machines
6 Results
Ebbco #GR5-0502, abrasive removal system, 600 GPM, 30 HP, 220/460 V., 6" suction size, 6" discharge size, 2004
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Finishing Machines
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Ebbco
Model: GR5-0502
Year: 2004
Ebbco GR5-0502 Abrasive Removal System is Designed to Continuously Remove the Spent Abrasive that Collects in the Catch Tank, Thus Eliminating Downtime for Clean Out and Maximizes ...more
Goff #3672SP, abrasive fitting machine, 36" x 60", 15 RPM, 1997
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Finishing Machines
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Goff
Model: 3672SP
Year: 1997
36" X 60" Abrasive Finisher with Spinner Hanger, (2) 10 HP Shot Wheels and Dual Station, Max Capacity: 36" X 60", Hook Spindle Rotation Speed: 15 RPM, Hook Spindle Max Capacity: 1,000 Lbs. ...more
Timesavers #137-1HDMW, abrasive finishing machine, 37" belt width, 15-45 FPM, Vision Control
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Finishing Machines
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Timesavers
Model: 137-1HDMW
37"W X 60"L Abrasive Belt with Quickpanel JR PLC Controller with Touch Screen, Electronic Digital Part Thickness (0 - 8") Adjustment, “Positrak" Electronic Sensing ...more
Timesavers Lynx #19MWT-DDB-60, triple head wet finishing machine, tDRO, 19" x60" belt, 2016
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Finishing Machines
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Timesavers
Model: 19MWT-DDB-60
Year: 2016
19" X 60" Triple Head Wet Finishing Machine with Digital Thickness Readout, (2) Drum Heads, (1) Brush Head, Dual Infeed & Outfeed Holddown Rolls, Paper Filtration / Coolant ...more
Timesavers #2231-23-084, Abrasive Finishing Machine, 37" x75" belt size, 15-45 FPM, 2008
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Finishing Machines
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Timesavers
Model: 2231-23-084
Year: 2008
37" X 75" Abrasive Finishing Machine with 3 Heads (2) Belt Sanders (1) Brush Head and Donaldson Torit Dust Collector., Belt Size: 37" X 75", Max Stock Width: 36" ...more
Southern Fabricating Mchy Sales has 1 more listing in Finishing Machines.
Forklifts
13 Results
4060 lb. Nissan #MAP1F2A25LV, Forklift, Cushion Tires, LP Powered, Side Shift, 3 Stage Mast
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Forklifts
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Nissan
Model: MAP1F2A25LV
Refurbished 4060 LBS Lifting Capacity Forklift with Cushion Tires, LP Powered, Fork Positioning, Side Shift, 3 Stage Mast, Automatic Transmission, Safety Cage and Blue Safety Lights ...more
8175 lb. Clark & Lewis #C500Y, diesel forklift, 47" forks, 15' lift height, cushion tires, 2-stage mast, side shift, mast tilt, 1F - 1R Gears and Canopy
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Forklifts
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Clark & Lewis
Model: C500Y
8,175 LBS Capacity Forklift with Cushion Tires, Diesel Powered, Two Stage Mast, Side Shift, Mast Tilt, 47" Forks, 1F - 1R Gears and Canopy, Lift Capacity: 8,175 LBS, Lift Height: ...more
9800 lb. Yale #GLP-120, Forklift, Cushion Tires, LP Gas Powered, Fork Positioning and Side Shift, 2007
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Forklifts
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Yale
Model: GLP-120
Year: 2007
9,800 LBS Capacity Forklift with Cushion Tires, LP Gas Powered, Fork Positioning and Side Shift, Lift Capacity: 9800 LBS, Back Tilt: 6 Degrees, Truck Weight: 18,830 LBS, Hours On Meter: ...more
10000 lb. Caterpillar #T120C. Forklift, Cushion Tires, LP Powered, Three Stage Mast and Side Shift
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Forklifts
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Caterpillar
Model: T120C
10,000 LBS Capacity Forklift with Cushion Tires, LP Powered, Three Stage Mast and Side Shift, Lifting Capacity: 10,000 LBS, Lift Height: 188", Dimensions: 160" X 56", Three Stage Mast: 90 / ...more
10000 lb. Hyster #H100XL, Forklift with Perkins Diesel Engine, 60" Forks, 197" Lift Height, Side Shift, Floodlights,
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Forklifts
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Hyster
Model: H100XL
Refurbished 10K LBS Capacity Forklift with Perkins Diesel Engine, New 60" Forks, 3 Stage Mast, 197" Max Lift Height, Side Shift, Floodlights, New Steer Tires & Fresh Paint ...more
Southern Fabricating Mchy Sales has 8 more listings in Forklifts.
Gap Frame Single Crank Press Machines
1 Result
121 Ton, Aida #G1-11, Gap Press, 4.3" Stroke, Air Clutch & Brake and Air Counter Balances, 30-70 SPM
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Gap Frame Single Crank Press Machines
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Aida
Model: G1-11
121 Ton Gap Press with Wintress Smart PAC Controls, 4.3" Stroke, Air Clutch & Brake and Air Counter Balances, Ram Adjustment: 3.5", Shut Height Over Bolster: 11.2", SPM: 30-70, Bed ...more
Horizontal and Vertical Milling Machine
3 Results
Dahlih #GH2200, Horizontal And Vertical Milling Machine, 51.2" x11" table, 1988
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Dahlih
Model: GH2200
Year: 1988
51.2" X 11" Horizontal and Vertical Milling Machine with Pendant Control, Horizontal Arbor Supports with Arbor, Coolant System and One Shot Lubrication, Table Working Size: 51.2" ...more
Sharp #VH25, heavy duty vertical & horizontal mill, 10" x56" table, 5 HP, 4500 RPM
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: VH25
36" X 16-1/2" DUAL Vertical & Horizontal Machining System with 5HP Vertical 4,500 RPM Milling Head, 5HP Horizontal X40 NST Milling Drive, Full 360° Turret Swivel, 45° ...more
Supermax #YC-2GS, Horizontal And Vertical Milling Machine, 51.2" x11" table, 1981
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Supermax
Model: YC-2GS
Year: 1981
51.2" X 11" Knee Mill with Variable Speed, Spindle and Turret Head, Horizontal Arbor Supports with Arbor, Coolant System, One Shot Lubrication and Bijur #UBA2 Spray Mist Coolant ...more
Horizontal Band Saws
13 Results
11.7" x 11" DoAll #DC-280NC, production band saw, PLC, 151"-1-1/4" blade, 52-275 FPM, new
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Horizontal Band Saws
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Doall
Model: DC-280NC
11-¾" x 11" Band Saw with PLC Control for All Electric and Hydraulic Functions Infinitely Variable Speed Controlled by VFD Hydraulic Retractable Shuttle Vise Material Indexer ...more
12" x 12" Amada #HFA-330W, Horizontal Bandsaw, Amada NC Control, 1.5" blade, parts counter, chip conveyor
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Horizontal Band Saws
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Amada
Model: HFA-330W
12" X 12" Horizontal Bandsaw with Amada NC Control, 1-½" Blade Parts Counter and Chip Conveyor., Rectangular Capacity (H): 12.9", Rectangular Capacity (W): ...more
14" x 14" Marvel Spartan #PA360EPC, Horizontal Bandsaw, 65-330 FPM.2014
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Horizontal Band Saws
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Marvel
Model: PA360EPC
14" X 14" Horizontal Bandsaw with Front & Rear Vices, Automatic Setting with Fast Approach Feeler Control / Hydraulic Full Stroke Cylinder and Conveyor, Capacity ...more
16.92" x 16.92" Bescutter B-43II, horizontal bandsaw, automatic chip conveyor, variable speed, hydraulic blade tension, New
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Horizontal Band Saws
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Bescutter
Model: B-43II
16" X 16" Horizontal Bandsaw with Automatic Chip Conveyor, Hydraulic Blade Tension and Variable Speed, Capacity: 16.92" X 16.92", Blade Size: 202.75" X 1.61" X ...more
18" x 13" Hyd-Mech #S-20, Semi Automatic Bandsaw, PLC Control
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Horizontal Band Saws
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Hyd-Mech
Model: S-20
18" X 13" Manual Bandsaw with PLC Controls, Direct Drive Blade, Gravity Head Feed, Cast Iron Frame and Guide Arms and Adjustable Flood Coolant System, Blade Size: 14' 10" X 1", Rounds ...more
Southern Fabricating Mchy Sales has 8 more listings in Horizontal Band Saws.
Horizontal CNC Machining Centers
8 Results
Kitamura MyCenter #HX1000, CNC horizontal machining center, 150 automatic tool changer, 80.3" X, 51.9" Y, 53.9" Z, 8000 RPM, BT50, Fanuc 16i-MB, 2010
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Horizontal CNC Machining Centers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Kitamura
Model: HX1000
Year: 2010
80.31" X 51.97" X 53.94" Travels With Full 4th Axis Pallet Indexing and Pallet Size 39.37" X 39.37". 8,000 RPM, 40 HP and 150 Position ATC for BT 50 Toolholders. Including: Fanuc 16i-MB ...more
Makino #A55E, CNC horizontal machining center, 22" X, 22" Y, 23.6" Z, 14000 RPM, CT40,2002
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Horizontal CNC Machining Centers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Makino
Model: A55E
Year: 2002
22" X 22" X 23.6" Horizontal Machining Center with CNC Control Professional 3, 2 Pallets, 14,000 RPM, Cat 40 Tooling, 225 Slot Tool Magazine, Oil Temp Regulating System, Chip ...more
Makino #A66, CNC horizontal machining center, 31.5" X, 27.5" Y, 25.1" Z, 14000 RPM, Fanuc Prof 3 CNC Control, 2000
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Horizontal CNC Machining Centers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Makino
Model: A66
Year: 2000
31.5" X 27.5" X 25.19" CNC Horizontal Machining Center with Fanuc Makino Professional 3 CNC Controls 4th Axis Pallet Rotation, Complete With Pallet Changers, (2) 19-1/2" X 19-1/2" Pallets ...more
Makino #A99, CNC horizontal machining center, 40 automatic tool changer, 39" X, 39" Y, 37" Z, 12000 RPM, CAT 50,40 HP, 2001
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Horizontal CNC Machining Centers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Makino
Model: A99
Year: 2001
39" X 39" X 37" Horizontal Machining Center with Makino Pro 3 Control, 1,000 PSI Thru Spindle Coolant & Air, Tool Life Monitoring, AC & Spindle Monitor, Spare Tool Selection, 1° ...more
Mazak #FH-480, CNC horizontal machining center cell, 22" X, 24" Y, 22" Z, 12000 RPM, CAT 40, M-Plus controller, 1998
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Horizontal CNC Machining Centers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Mazak
Model: FH-480
Year: 1998
22.05" X 24.02" X 22.02" Horizontal Machining Center Cell with M-Plus Controller, Full 4th Axis, 60 Tool Magazine and 12,000 RPM, X-Axis Travel: 22.05", Y-Axis Travel: 24.02", Z-Axis ...more
Southern Fabricating Mchy Sales has 3 more listings in Horizontal CNC Machining Centers.
17 Ton, DiAcro #14-48, hydra-mechanical press brake, 4' overall, 36" between housing, 6.5" throat, Automec CNC 9X9 Control, foot pedal, hand adjustable ram height, 1984, #3611
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Hydraulic Press Brakes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Diacro
Model: 14-48
Year: 1984
17 Ton X 4' Hydra-Mechanical Press Brake with Automec CNC 9X9 Control, Foot Pedal, Hand Adjustable Ram Height., Bed and Ram Length: 48"Distance Between Housings: 36"Throat : 6.5"Max ...more
45 Ton, Baileigh #HPB-45NC, 9.84 stroke, 7.875 punch height, 36.61 table height, foot pedal Control
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Hydraulic Press Brakes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Baileigh
Model: HPB-45NC
45 Ton X 9.84" Horizontal Press Brake with NC controls, Manual Backgauge, Quick Releasing Tooling System, 80 mm V-Die and Post, Product Counter, 2-Button and Foot Pedal Control, Pressure: ...more
60 Ton, Accurpress #7606, hydraulic press brake, 6' overall, 52" between housing, 8" stroke, Automec 2-Axis Back Gauge, 1992
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Hydraulic Press Brakes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Accurpress
Model: -7606
Year: 1992
60 Tons X 6’ Hydraulic Press Brake with Automec 2 - Axis Backgauge, Footswitch Pedestal Station with Ram Up Button & Power Ram Tilt, 2-½ X 3" Standard Die and Kidder ...more
70 Ton, Adira #QHD-6020, hydraulic press brake, 6' overall, 61" between housing, Cyblec DNC60 2-Axis Back Gauge, 2005
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Hydraulic Press Brakes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Adira
Model: QHD-6020
Year: 2005
70 Ton X 6' Hydraulic Press Brake with Free Standing Control w/ Electric Foot Switch, Cyblec DNC60 Two Axis Back Gauge, Sectional Ram Die Clamps (10 Universal Die Adapters), Push ...more
90 Ton, Chicago #1012L, 12' overall, 6" stroke, foot pedal Control, 15" open height
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Hydraulic Press Brakes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Chicago
Model: 1012L
90 Ton X 12' Mechanical Press Brake with Foot Pedal Control and No Pit Required, Tonnage: 90, Distance Between Housings: 126", Ram Stroke (Variable): 0 - 6", Open Height: 15", INCLUDES: ...more
Southern Fabricating Mchy Sales has 39 more listings in Hydraulic Press Brakes.
300 Ton, Sutherland #HP-300, Hydraulic Punch Press, 19.6" stroke, 27.56" Shut Height, 2002
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Hydraulic Presses
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sutherland
Model: HP-300
Year: 2002
300 Ton 4 Post Press with Operator Palm Stand, 60" LR X 48" FB Bed & Slide Work Area T-Slotted, Allen-Bradley SLC5/03 CPU and 263 Gallon Hydraulic Oil Tank, Capacity: 300 Tons, Stroke ...more
Fanuc, LR Mate 200iB, 5 Kg Robot, R-J3ib MATE Controller
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Industrial Robots
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Fanuc
Model: LR MATE 200IB
5 Kg Robot with R-J3ib MATE Controller and 6 - Axis, Payload: 5 Kg, H-Reach: 70mm, Robot Mass: 45 Kg, Robot Motion Range:, J1 ± 320°, J2 ± 185°, J3 ± 316°, J4 ...more
Initial and Double Pinch Plate Bending Rolls
11 Results
1' Webb #9L-1210, Initial Pinch Plate Roll, 12" roll diameter, adj drop end, 6-12 FPM, 20 HP
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Webb
Model: 9L-1210
10' X 1/2" Mechanical Plate Roll with Hand Control, Initial Pinch, 12" Diameter Roll, Air Drop End, Power Rear Roll Adjustment and 440V / 3 Phase, Rolling Speed: 6- 12 FPM, HP: 20 ...more
4' x 1/8" Akyapak #AS90-12/2.5, plate roll, digital display, induction hardend rolls
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Akyapak
Model: AS90-12/2.5
11 GA X 4’ Plate Roll with Digital Display, Induction Hardened Rolls., Working Length: 4’Pre-Bending: 12 GABending: 11 GAYield Point: 35,000 PSINumber of Rolls: 3Top Roll: ...more
4' x 1/8" Bendmak #CY90-12/3.0, plate roll, cast iron frame, cone bending device
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Bendmak
Model: CY90-12/3.0
4' X 11GA Plate Roll with Cast Iron Frame, Central Rollers, Cone Bending Device, Self Braking Main Motor and Remote Emergency Stopping w/ Safety Trip Wire., Working length: ...more
4' x 11/64" Akyapak #ASM-110, plate roll, digital read out, forward/reverse foot pedal, 2 HP, 220 V.
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Akyapak
Model: ASM-110
4’ X 8 Ga Plate Roll with Forward and Reverse Foot Pedal, 3 HP 220-Volt 3-Phase Motor, Digital Readout, Hardened Rolls., Working Length: 4’Pre-Bending Thickness: 10 GaMax ...more
4' x 7/32" Bendmak #CYL140-12/5.5, 3-rolls initial pinch plate rolling machine
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Bendmak
Model: CYL140-12/5.5
1/4" X 4' Three Rolls Initial Pinch Plate Rolling Machine with Digital Readout, Hardened Rolls, Motorized Back Roll, Dual Voltage, Durable Cast Iron Frame, Powered Central Rollers, Cone ...more
Southern Fabricating Mchy Sales has 6 more listings in Initial and Double Pinch Plate Bending Rolls.
3" x 3" x 3/8" Piranha #P50, hydraulic ironworker, 50 ton, 5" throat, 3 HP, new
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Ironworkers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Piranha
Model: P50
50 Ton Hydraulic Ironworker with Punch Station Angle Shear Flat Shear Station Coper-Notcher Station Urethane Stripper Assembly Hold Down Assembly Electric Foot Switch Electric Limit ...more
4" x 4" x 1/4" Edwards, ironworker, 50 ton, 23 amps, 5 HP
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Ironworkers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Edwards
50 Ton Ironworker with Electric Foot Pedal with Integrated Jog Control, 4 Work Stations (Punching, Flat Bar Shear, Angle Shear & Copper Notcher), Adjustable Electric Stoke Control ...more
4" x 4" x 1/4" Edwards, ironworker, 55 ton, 1.25" stroke, 10" brake
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Ironworkers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Edwards
55 Ton Ironworker with 4 Workstations (Punch, Flat Bar Shear, Angle Shear, 10" Brake), 4 - Way Die Allowing 1/16", 1/8", 3/16" and 1/4" To Be Formed to a 90° Angle, Oversized Punch ...more
5" x 5" x 3/8" Piranha #P65, hydraulic ironworker, 65 ton, 8" throat, 7.5 HP, new
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Ironworkers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Piranha
Model: P65
65 Ton Hydraulic Ironworker with Complete Punching Attachment with split dovetail mounting 5 Punch and Die sets Automatic Urethane Hold Down on the Punch Stripper and on Angle Plate and Bar ...more
5" x 5" x 3/8" Piranha #PII-88, dual operator ironworker w/auto hold down, 88 ton, new
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Ironworkers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Piranha
Model: PII-88
88 Ton X 9" Ironworker with Automatic Hold Down, Coupling Wrench, Punch Holder, Stripper, & Die Block, Chip Bucket, 5 Punch & Die Sets 9/16" through 1-1/16", Extra ...more
Southern Fabricating Mchy Sales has 7 more listings in Ironworkers.
27" x 28" Marvel #WS2543M, Horizontal Miter Saw, 98-361 FPM
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Miter Saws
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Marvel
Model: WS2543M
27" X 28" Miter Saw with Operators Control Panel, Blade Tension, Hydraulic Down Feed, Chip Brush and Vise Jaw, Capacities:, Rectangle: 27" X 25.6 45 Degrees, Round: 28" 60 Degrees ...more
Triumph #5255, 20.375" x 3" electric programmable paper cutter, 2018
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Paper Cutters
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Triumph
Model: 5255
Year: 2018
8’ X 3/16" Mechanical Power Squaring Shear with Amada Shearing Control, Backgage, Front Squaring Arm, (2), Mechanical Clutch w/ Magnetic Brake, Inch/Metric Selectable, Bijou ...more
Plain Cylindrical Grinders
3 Results
7" x 19" Sharp #OD-820SE, outside dimension cylindrical grinder, automatic lube system, coolant system, #3MT, new
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Plain Cylindrical Grinders
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: OD-820SE
7.9" X 19.7" OD Grinding Capacity with Servo Motor & Ballscrew Driven Infeed, MT3 Tailstock, Manual Dresser Mounted on Tailstock, Chuck or 5C Collet Workhead +/- 45° ...more
9.9" x 19" Sharp #OD-1020SE, outside dimension hydraulic grinder, PLC Control, universal table, new
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Plain Cylindrical Grinders
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: OD-1020SE
9.9" X 19.7" Capacity OD Hydraulic Grinder with a PLC controller using a simple menu driven LCD touch screen with 16" Diameter 5HP Wheelhead, Universal Table with Variable ...more
17" x 23" Sharp #OD-1840SE, outside dimension hydraulic grinder w/PLC Control, 16" x2" x5" grinding wheel, new
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Plain Cylindrical Grinders
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: OD-1840SE
17.7" X 23.6" Capacity OD Hydraulic Grinder with a PLC controller using a simple menu driven LCD touch screen with 16" Diameter 7.5HP Wheelhead, Universal Table with Variable ...more
Acra-Cut #0815, Plate Saw, 5" x 150", Automatic CNC Back Gauge, EZ Series DVG Control and Chip Auger, 1984
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Plate and Block Saws
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Acra-Cut
Model: 0815
Year: 1984
5" X 150" Automatic Plate Saw with EZ Series DVG Control and Chip Auger., Cut Capacity: 5" (Aluminum), Cut Length: 150", Backgauge: Automatic CNC, Backgauge Depth: ...more
Power Squaring Shears (Gauge)
2 Results
14 gauge x 10' Primeline #M1014, Power Squaring Shear, 35 SPM, 4.5 HP, 40" squaring arm, 30" Back Gauge
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Power Squaring Shears (Gauge)
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Primeline
Model: M1014
14 Gauge x 10’ Mechanical Power Squaring Shear with 40" Squaring Arm, Rear Operated Squaring Arm, Dual Front Supports, Solid Mechanical Finger Guard/Holddown with Non-Marking Pad ...more
10 gauge x 10' Cincinnati #1010, power squaring shear, 24" front operated power back gauge, 7.5 HP, 40 SPM, automatic pressure lubrication
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Power Squaring Shears (Gauge)
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Cincinnati
Model: 1010
10 Gauge x 10’ Mechanical Squaring Shear with 24" Front Operated Power Back Gauge, 7.5 HP, Jaw Clutch and Friction Brake, Automatic Pressure Lubrication, Non Float Inclined Ram ...more
Power Squaring Shears (Inch)
53 Results
3/16" x 8' Amada #M2545, power squaring shear, 48" front operated power back gauge, 8' squaring arm, 1983
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Power Squaring Shears (Inch)
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Amada
Model: M2545
Year: 1983
3/16" X 8’ Mechanical Power Squaring Shear with Front Operated 48" Backgauge, R/H Mounted 8’ Squaring Arm, Dual Front Supports, Centralized Lubrication System And ...more
1/4" x 6' Lodge & Shipley #0406-H, power squaring shear, 36" front operated power back gauge, hydraulic holddowns, air clutch
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Power Squaring Shears (Inch)
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Lodge & Shipley
Model: 0406-H
¼" X 6’ Mechanical Powering Shear with Front Operated Backgauge, Seven Hydraulic Hold Downs, Air Clutch, Drop Down Scrap Chute and Foot Pedal., Capacity: 1/4"Length of ...more
1/4" x 6' Piranha CNC hydraulic guillotine style shear, 39" BG, 10 HP, 10 hold downs, new
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Power Squaring Shears (Inch)
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Piranha
1/4" X 6’ CNC Hydraulic Guillotine Style Shear with Delem DAC 360 Controller, CNC Blade Gap Adjustment, CNC Rake Angle Adjustment, Leuze Light, Curtain/Photocell Switch, 3 Front ...more
1/4" x 10' Accurshear #625010, hydraulic shear, 36" front operated power back gauge, 16 hydraulic hold downs, 20 HP, 1990
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Power Squaring Shears (Inch)
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Accurshear
Model: 625010
Year: 1990
1/4" X 10’ Hydraulic Power Squaring Shear with Accurshear Control, Front Operated Programmable 36" Backgage, Stroke Control, Quick Blade Gap Adjustment, Capacity: 1/4", Cutting ...more
1/4" x 10' Accurshear #625010, hydraulic power squaring shear, 36" front operated power back gauge, 16 hold downs
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Power Squaring Shears (Inch)
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Accurshear
Model: 625010
¼" X 10’ Hydraulic Power Squaring Shear with Accurshear Control, Front Operated Programmable Backgauge, Stroke Control and Blade Gap Adjustment, Capacity: ¼" ...more
Southern Fabricating Mchy Sales has 48 more listings in Power Squaring Shears (Inch).
Power Tank Turning Rolls
6 Results
3.3 Ton, Bendmak #BCR-03, 6600 lbs, digital speed indicator, manual diameter adj.
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Power Tank Turning Rolls
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Bendmak
Model: BCR-03
6,600 LBS X 10’ ˜ Conventional Rotator with Digital Speed Indicator, Manual Diameter Adjustments, “PU" Rollers Absorbing Shocks and Vibrations and Adjustable Rotation ...more
6 Ton, Bendmak #BCR-1000, chain rotator, 15' cable length, automatic closing of chaing levers
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Power Tank Turning Rolls
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Bendmak
Model: BCR-1000
6 Ton Chain Rotator with 15 Foot Cable Length, Automatic Closing of Chain Levers Upon Loading of Piece, Sturdy Chain Gear Structure, Reducer Mechanisms with Auto Blockage System, Motors ...more
6 Ton, Bendmak #BCR600, Chain Rotator, new
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Power Tank Turning Rolls
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Bendmak
Model: BCR600
6 Ton Chain Rotator with Remote Controller w/ 5 Meter Cable Length, Automatic Closing of Chain Levers Upon Loading the Piece, Sturdy Chain Gear Structure, Reducer Mechanisms with Auto - ...more
10 Ton, Bendmak #BRR10000, Rope Rotator, new
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Power Tank Turning Rolls
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Bendmak
Model: BRR10000
10 Ton Rope Rotator with Controller W/ 5 Meter Cable Length, Rope Arms Angle Settings (Hydraulic), Safety Platform for Beam Carrying or Standing, Easy Controlling Hydraulic Power Pack ...more
12 Ton, Bendmak #BCR1200, Chain Rotator, new
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Power Tank Turning Rolls
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Bendmak
Model: BCR1200
12 Ton Chain Rotating Machine with Remote Controller W/ 5 Meter Cable Length, Automatic Closing of Chain Levers Upon Loading the Piece, Sturdy Chain Gear Structure, Reducer Mechanism with ...more
Southern Fabricating Mchy Sales has 1 more listing in Power Tank Turning Rolls.
Precision and Second Operation Lathes
1 Result
Monarch #EE, Precision Toolroom Lathe, 10" x 20", 23.5" sw, 4000 RPM
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Precision and Second Operation Lathes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Monarch
Model: EE
10" X 20" Precision Toolroom Lathe with Center Morse Taper #2 and 4,000 RPM Spindle, Swing Over Bed: 12.5", Swing Over Cross Slide: 7.25", Distance Between Centers: 20" / 30", Bed Width: ...more
Precision Roller Levelers
1 Result
72" x .6" Herr Voss #RH84/1.156-19/1634HI Leveler, 4 High Roll Arrangement, 50-250 FPM
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Precision Roller Levelers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Herr Voss
Model: RH84/1.156-19/1634HI
72" X 84" X.60" Leveler with 4 High Roll Arrangement., Max Capacity: 72" X 84" X 0.60", Thickness Capacity: 0.016" - 0.060", Nominal Width: 72" ...more
Pyramid Plate Roll Machines
2 Results
8' x 1/2" Bendmak #CY4R-HHS-270-25/13, variable speed, AK400 Control, 15 HP
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Pyramid Plate Roll Machines
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Bendmak
Model: CY4R-HHS-270-25/13
1/2" x 8' CNC Plate Roll with AK400 CNC Controls, Variable Speed, Induction Hardened Roll, Cone Bending Device and Prepared for Side and Top Support, Working Length: 8', Max ...more
10' x 2.36" Faccin #B3-3158, 75 HP, 3 roll, variable speed, 2014
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Pyramid Plate Roll Machines
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Faccin
Model: B3-3158
Year: 2014
2.36" X 120" Hydraulic 3-Roll Plate Roll with Hydraulic Drop End, Independently Powered Hydraulic Rolls, Variable Rolling Speeds, Hydraulic Roll Adjustment, Induction Hardened ...more
3' -8" Sharp #RD-820, radial arm drill, #4MT, box table, coolant system, worklight, toolbox
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Radial Drills
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: RD-820
33.5" X 47 – 5/8" Capacity Radial Drill Press with Hardened & Ground Arm Slideways, Electric Elevation Drive, T-Slots and Drain Channel in Base Casting, Box Table ...more
4' -11" Sharp #RD-1230, radial arm drill, box table, coolant system, worklight
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Radial Drills
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: RD-1230
48.5" X 54" Capacity Radial Drill Press with #4MT, 1500 RPM 5HP Spindle Drive, Hardened & Ground Arm Slideways, Electric Elevation Drive, T-Slots and Drain Channel in Base ...more
5' Kitchen & Wade #E27, radial drill press w/heavy duty column, #6MT, T-slotted box table
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Radial Drills
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Kitchen & Wade
Model: E27
5’ Reach Radial Drill Press with Heavy Duty Column 5HP Raise/Fall Drive, 4HP Spindle, #6 Morse Taper Spindle, 8.5 - 800 RPM, T-Slotted Box Table, Power Locking Ram and Carriage ...more
5.2' -17" Sharp #RD-1600, radial arm drill, #5MT, 1920 RPM, 7.5 HP
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Radial Drills
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: RD-1600
63" X 63" Capacity Radial Drill Press with #5MT, 1920 RPM, 7.5 HP Spindle Drive, Hardened & Ground Arm Slideways, Electric Elevation Drive, T-Slots and Drain Channel in Base ...more
6' -17" Sharp #RD-2000, radial arm drill, #5MT, 1920 RPM, 7.5 HP, coolant system
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Radial Drills
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: RD-2000
78.74" X 72.83" Capacity Radial Drill Press with #5MT, 1920 RPM, 7.5 HP Spindle Drive, Hardened & Ground Arm Slideways, Electric Elevation Drive, T-Slots and Drain Channel in ...more
Southern Fabricating Mchy Sales has 1 more listing in Radial Drills.
Ram (Die Sinker) EDM
2 Results
Mitsubishi #EA8, Sinker Electrical Discharge Machine, 11.8" X, 9.8" Y, 9.8" Z, Windows explosion proof Operating System, 2005
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Ram (Die Sinker) EDM
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Mitsubishi
Model: EA-8
Year: 2005
11.8" X 9.8" X 9.8" Sinker EDM with Windows XP Operating System, Fixed Table Traveling Column Construction, Direct Drive AC Smart Servo System, 3-Dimensional Lateral Servo ...more
Mitsubishi #EA8, Sinker Electrical Discharge Machine, 13.8" X, 9.8" Y, 11.8" Z, 2011
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Ram (Die Sinker) EDM
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Mitsubishi
Model: EA-8
Year: 2011
13.8" X 9.8" X 11.8" Axis Travel Sinker EDM with Mitsubishi CNC Control, C-Axis, Shuttle Tool Changer, 3r Combi Chuck and Chiller Unit, X, Y & Z Axes Travel: 13.8" X 9.8"Xx ...more
Reciprocating Surface Grinders - Horizontal Spindle
6 Results
6" x 12" Mitsui #MSG-200MH, surface grinder, programmable digital variable spindle Control
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Mitsui
Model: MSG-200MH
6" X 12" Surface Grinder with Programmable Digital Variable Spindle Control, Linear Ball Bearings Under Table, Hardened Steel Ways, One Shot Lube System., Table - W: 6"Table ...more
6" x 18" Chevalier #FSG-618M, Surface Grinder, 2-Axis digital read out, 2 HP, hand, chuck
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Chevalier
Model: FSG-618M
6" X 18" Chevalier Surface Grinder with 2 - Axis Digital Readout, Hand, Chuck and 2 HP Motor., Table Width: 6"Table Length: 18"Spindle: HorizontalPower: 2 HPGrinding ...more
6" x 18" Sharp #SG-618, precision manual surface grinder, 1.5 HP
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: SG-618
6" X 18" Capacity *Brand New* Manual Surface Grinder with 1.5 HP Motor, One “V" way and one flat way for longitudinal travel, Hand-scraped ways with Turcite B coating ...more
12" x 24" Sharp #SH-1224, automatic surface grinder, 3 HP, 1720 RPM, 14" x 1.25' x 5" wheel
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: SH-1224
12" X 24" Capacity Automatic Surface Grinder with 3.0 HP Motor, 1,720 RPM Spindle Speed, Hand-scraped ways with Turcite B coating, Double ‘V’ Ways, Extra Wide Bed ...more
16" x 32" Sharp #SH-1632, automatic, 5 HP, 1720 RPM, extra wide bed, 14" x1.5" x5" whl.
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: SH-1632
16" X 32" Capacity Automatic Surface Grinder with 2-axes Auto, or 3-axes Auto with downfeed control option, 5HP Motor, Spindle Speed 1,720 RPM, 2-V Ways, Extra Wide Bed, Double ...more
Southern Fabricating Mchy Sales has 1 more listing in Reciprocating Surface Grinders - Horizontal Spindle.
Rotary Screw Air Compressors (Positive Displacement)
1 Result
56 cfm, 125 psig, Ingersoll-Rand #SSR-EP15SE, Air Compressor, 15 HP, #4070
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Ingersoll-Rand
Model: SSR-EP15SE
125 PSI @ 56CFM 15HP Rotary Screw Air Compressor, Brand: Ingersoll-RandModel: SSR-EP15SEHorsepower: 15Capacity: 56 CFMRated Operating Pressure: 125 PSIGVoltage/Phase/Hertz: 460/3/60Amp: ...more