901 - 1000 of 2083 listings
Hyundia Hyundai Kia #SKT21LMS, CNC turning center, 21.7" swing, 8" chuck, 3-jaw, 2.5" bar, 10" dia., 20.9" lgth, Fanuc 0i-TC, C-Axis, live tool, sub spindle, 2007
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Hyundai Kia
Model: SKT-21LMS
Year: 2007
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Fanuc 0i-TC CNC Control, 7,996 Hours Cutting ...more
Hyundai Kia #SKT21LMS, CNC lathe, 9.84" chk, 2.559" bore, Fanuc 21i-TB, 2006
Machine Tool Bids | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Hyundai Kia
Model: SKT-21LMS
Year: 2006
MACHINE, X-Axis Travel: 8.268", Z-Axis Travel: 21.654", C axis: 360.000 positions, Max Turning: 21.654", Spindle Bore: 2.559", Spindle Ranges: 4000 Rpm, Chuck sub spil: 160 mm, Chuck spindle: 250 mm.
Hyundai Kia #SKT21LMS, CNC lathe, 9.84"chk, 2.559" bore, Fanuc 21i-TB, 2006
Machinery Marketing International | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Hyundai Kia
Model: SKT-21LMS
Year: 2006
Used Hyundai Kia Kia SKT 21 LMS. This pre-owned CNC Lathe is in great working condition and can be securely delivered to your facility floor. If you have any technical questions about this Hyundai Kia CNC Lathe we can review machine. To request a quote, inquire about rigging and trucking or to schedule an inspection ...more
Hyundai Kia #SKT100, CNC turn center, Fanuc Series OiTC, 21.7" swing, 6" chuck, 1.7" bar, 2008
Machinery Central | Louisville, KY
Category: CNC Lathes and Turning Centers
Seller: Machinery Central
Location: Louisville, KY
Mfr: Hyundai Kia
Model: SKT-100
Year: 2008
Hyundai Kia SKT100 CNC Turning Center, 3300 Run hours, New 2008, Fanuc Series Oi-TC Controls, 12 Position Turret, Tailstock, Tri-Mist Collector, Manufacturer Hyundai-Kia Model SKT100 Year 2008 Condition Used Serial Number G 3157-2436 Stock Number 1382 Weight 8,377lbs S/n G 3157-2436 Chuck size 6″ Swing over the ...more
Hyundai Kia #SKT200TTSY, CNC Lathe, 30.7" Swing, 3.1" Bore, 2.5" Bar, 15.4"/11.8" diameter x 36.2" L Turn capacity, 33/20 HP, 50-5000 RPM, 12-Station Turret, 2008
Machine Tool Bids | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Hyundai Kia
Model: SKT-200TTSY
Year: 2008
Used 2008 Hyundai Kia SKT200TTSY. Machine Tool Bids offers plenty of CNC Lathes and other fabrication and CNC machines for great prices. Contact us if you have any questions about this Hyundai Kia SKT200TTSY or any of our machines., MACHINE, Swing over Bed: 30.7", Swing Over Saddle: 29.1", Maximum Turning ...more
Get email updates for newly added CNC Lathes and Turning Centers
A CNC lathe machine, or CNC turning machine, is a machine tool that rotates a bar of material to precisely cut, shape, and finish materials such as metal, wood, and plastic. The main spindle rotates the material, while the cutting tool can move along multiple axes.
Hyundai Kia #SKT200TTSY, 30.7" swing, 2.5" bar, (2) 12 station turrets, 2008
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Hyundai Kia
Model: SKT-200TTSY
Year: 2008
HYUNDAI KIA SKT200TTSYSWING OVER BED 30.7″SWING OVER SADDLE 29.1″MAXIMUM TURNING DIAMETER (UPPER / LOWER) 15.4″ / 11.8″MAXIMUM TURNING DIAMETER / LENGTH 36.2″MAIN SPINDLE SPEED 50 – 5000 RPMSPINDLE BORE / BAR CAPACITY / NOSE 3.1″ / 2.56″ / A2-8MOTOR 33/ 20 HPSUB SPINDLE ...more
JUST ADDED!
Hyundai KIA #SKT-21, CNC lathe, 8" chuck, 4000 RPM, Fanuc CNC, 2008
Star Equipment Co., Inc. | Utica, MI
Category: CNC Lathes and Turning Centers
Seller: Star Equipment Co., Inc.
Location: Utica, MI
Mfr: Hyundai Kia
Model: SKT-21
Year: 2008
Hyundai Kia SKT-21 Universal Lathe from 2008, used condition. s an 8" chuck, max 4,000 RPM, and Fanuc 0i-TC CNC Control. Includes 12 Station Automatic Turret, chip conveyor, and hydraulic tailstock, offering reliable performance., 2008 HYUNDAI KIA SKT-21, Swing. 23.6", Machining Length. 20.1", # Axis. 2, Chuck Size. ...more
Hyundai Kia #SKT-250M, CNC lathe, 24.4" swing, 10" chuck, 3.2" bar, 16.14"dia., 27.56"lgth, tool presetter, tailstock, chip conveyor, 2009
Machinery Marketing International | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Hyundai Kia
Model: SKT-250M
Year: 2009
Used Hyundai Kia SKT 250M. This pre-owned CNC Lathe is in great working condition and can be securely delivered to your facility floor. If you have any technical questions about this Hyundai Kia CNC Lathe we can review machine. To request a quote, inquire about rigging and trucking or to schedule an inspection ...more
Hyundai Kia #SKT-250M, CNC lathe, 24.4" swing, 10" chuck, 3.2" bar, 16.14"dia., 27.56"lgth, live tool, tool presetter, tailstock, chip conveyor, Fanuc 21-TB, 2009
Machine Tool Bids | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Hyundai Kia
Model: SKT-250M
Year: 2009
Used Hyundai Kia SKT 250M. This pre-owned CNC Lathe is in great working condition and can be securely delivered to your facility floor. If you have any technical questions about this Hyundai Kia CNC Lathe we can review machine. To request a quote, inquire about rigging and trucking or to schedule an inspection ...more
Hyundai Kia #SKT250SY, Fanuc 18iTB, 30 HP main, 10 HP sub, 3" bar, Y-Axis, live tools, parts catcher, tool setter, chip conveyor, 6,132 cut hrs., S/N SKT250SY 0008, 2006
Machinery Solutions Inc | Lexington, SC
Category: CNC Lathes and Turning Centers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Hyundai Kia
Model: SKT-250SY
Year: 2006
Capacity:, Swing over bed ...more
Hyundai Kia #SKT-300, CNC turning center, Fanuc 0iTC, 29.5" swing, 18.9" swing over cross slide, 3.5" bar, 2011
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Hyundai Kia
Model: SKT-300
Year: 2011
Hyundai-Kia SKT300 CNC Turning Center (subject to buyer verification):Swing Over The Bed29.5”Swing Over the Cross Slide18.9”Max Turning Diameter22.1”Max Turning Length28” aprox**Spindle Bore / Bar Capacity4.02” / 3.54”X-Axis Travel14”Z-Axis Travel29.5”Spindle Speed3000 ...more
Hyundai Kia #SKT-300, CNC lathe, Fanuc 0iTC, 30" swing, 15" chuck, turbo chip conveyor, 2006
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Hyundai Kia
Model: SKT-300
Year: 2006
Hyundai Kia SKT300 CNC Lathe, 12 station turret, Chuck to center 30” (1 meter), Swing over bed: 30”, 91mm bore actuator (3.582”), Weight: 5,800 kg, Height 6’7” x width: 6’8” x length 11’10”, Fanuc 0i-TC, Turbo Chip conveyor – with chip pan, 15” chuck ...more
Hyundai Kia #SKT460, CNC Turning Center Lathe, 39.4" machining length, 29.5" swing, 24.8" turning diameter, 18" chuck, 40 HP, 2000 RPM, Fanuc 21i-TB CNC, 2008
Harris Machine Tools, Inc. | Houston, TX
Category: CNC Lathes and Turning Centers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Hyundai Kia
Model: SKT-460
Year: 2008
FANUC 21i-TB, CHIP CONVEYOR, NOTES:, HYDRUALIC CHUCK REMOVED, NO TAILSTOCK.
JUST ADDED!
Hyundai Kia #SKT100, Cnc Turning Center, 12 tool, 6000 RPM, 21.7" swing, 13.8" swing over cross slide, 11.8" centers, 2.1" bore, tailstock, 2008
Aucto | San Francisco, CA
Category: CNC Lathes and Turning Centers
Seller: Aucto
Location: Louisville, KY
Mfr: Hyundai Kia
Model: SKT100
Year: 2008
THE HYUNDAI – KIA SKT100 CNC TURNING CENTER IS FANUC SERIES OI-TC CONTROLS AND A 12-POSITION TURRET. IT S A KITAGAWA B-206 HYDRAULIC 3-JAW CHUCK WITH A 6-INCH CHUCK SIZE, COLLET CLOSER CHUCK, AND TAILSTOCK. THE MACHINE OFFERS A SWING OVER THE BED OF 21.7 INCHES AND A SWING OVER THE CROSS SLIDE OF 13.8 INCHES ...more
Hyundai Kia #SKT200TTSY, Fanuc 18iTB, twin spindle, twin turret, live tooling, 8" chucks, chip conveyor
HTR Global Inc. | Houston, TX
Category: CNC Lathes and Turning Centers
Seller: HTR Global Inc.
Location: Houston, TX
Mfr: Hyundai Kia
Model: SKT200TTSY
Year: 2009
2009 Hyundai Kia SKT 200 TTSY, Box Way CNC Lathe, Control FANUC 18i-TB, Model SKT 200 TTSY, Serial Number SKT200TTSY0010, Swing Over Bed 30.7", Maximum Swing Over Carriage 27.5", Maximum Machining Length 35.4", Turning Diameter 15.4", Turning Diameter Lower Turret 11.8", Center Distance 48.42", Chuck Size 8", Bar ...more
Hyundai Kia #SKT2100SY, CNC Lathe, 24.8" swing, 17.91" max. turning length, 13.19" machining diameter, 2.5" bar, A2-6, 20 HP, 4500 RPM, sub spindle, live tooling, Fanuc 18iTB
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Hyundai Kia
Model: SKT2100SY
Used CNC Lathe with FANUC 18iTB CNC Control. s a 24.8" swing, 4 axes, 2.56" bar capacity, 20HP, max RPM of 4,500, live tooling, and 12 tool positions. Includes subspindle and collet chuck on main spindle., MAX. SWING. 24.80", SWING OVER CROSS SLIDE. 15.35", MAX. MACHINING DIA. 13.19", MAX. TURNING LENGTH. 17.91", BAR ...more
Hyundai Kia #SKT2100SY, CNC lathe, 24.8" swing, collet chuck, 2.5" bar, 13.19" dia., 17.91" lgth, 45-4500 RPM, A2-6, 20 HP, 12 turret, Fanuc 18iTB, sub spindle, Y-Axis
Machinery Values Inc | Harrison, NJ
Category: CNC Lathes and Turning Centers
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Hyundai Kia
Model: SKT2100SY
HYUNDAI-KIA SKT-2100SY MULTI-AXIS CNC TURNING CENTER :MAX. SWING. 24.80"SWING OVER CROSS SLIDE. 15.35"MAX. MACHINING DIA. 13.19"MAX. TURNING LENGTH. 17.91"BAR CAPACITY. 2.56"SPINDLE SPEED, MAIN. 45-4500 RPMSPINDLE NOSE, MAIN. A2-6MAIN SPINDLE MOTOR. 20HPC-AXIS INDEXING, MAIN. 0.001 ...more
Hyundai Kia #VX400, vertical machining center, 24 ATC, 31.5" X, 18.1" Y, 20.5" Z, 8k RPM, 20 HP, 18.1" x 39.4" table, Fanuc 0i-MC, rigid tap, direct drive, 8,645 hours, 2008
Clark Machinery Sales LLC | Hunt Valley, MD
Category: CNC Lathes and Turning Centers
Seller: Clark Machinery Sales LLC
Location: Hunt Valley, MD
Mfr: Hyundai Kia
Model: VX400
Year: 2008
2008 HYUNDAI KIA VX400, TABLE LENGTH. 39.4", TABLE WIDTH. 18.1", TABLE CAPACITY. 1,323 lb, X-AXIS TRAVEL. 31.5", Y-AXIS TRAVEL. 18.1", Z-AXIS TRAVEL. 20.5", SPINDLE SPEED. 8,000 RPM, SPINDLE MOTOR. 20 hp, SPINDLE TAPER. CAT 40, TOOL CAPACITY (ATC). 24, RAPID TRAVERSE - X AXIS. 1,260 in/min., RAPID TRAVERSE - Y AXIS. ...more
Hyundai WIA #E160A, CNC Lathe, 18.8" swing, 11.81" machining length, 6" chuck, 1.7" bar, 14.8 HP, 6000 RPM, 2015
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Hyundai Wia
Model: E160A
Year: 2015
CNC Lathe in used condition. s 480 mm swing, 300 mm machining length, 6" chuck, 45 mm bar capacity, 11 kW power, and 6,000 RPM max speed., 2015 HYUNDAI WIA E160A, Swing. 480 mm, Machining Length. 300 mm, Chuck Size. 6", Bar Capacity. 45 mm, Power. 11 kW, Max RPM. 6,000 RPM.
Hyundai Wia #E160A, CNC lathe, 11" diameter, 11.8" length, 10/15 HP, 6k RPM, 6" chuck, Fanuc I Control, tailstock, LNS bar feed, chip conveyor, 2015
Wheeler Machinery Sales | Pomona, CA
Category: CNC Lathes and Turning Centers
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Hyundai Wia
Model: E160A
Year: 2015
2015 Hyundai Wia E160A CNC Lathe #7823 #2, Max Turning Diameter: 11, Max Turning Length: 11.8, Chuck Size: 6, Spindle RPM: 6,000 RPM, Spindle Output: 10/15 HP, X Travel: 6.5, Z Travel: 13, Rapid Traverse: 1,181 IPM, Turret: 12 positions, Hyundia Wia Fanuc i Series Control, LNS Eco Load S2 Bar Feeder, Tailstock, Chip ...more
Hyundai Wia #E160A, CNC lathe, 11" diameter, 11.8" length, 10/15 HP, 6k RPM, 6" chuck, Fanuc I Control, tailstock, LNS bar feed, chip conveyor, 2015
Wheeler Machinery Sales | Pomona, CA
Category: CNC Lathes and Turning Centers
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Hyundai Wia
Model: E160A
Year: 2015
2015 Hyundai Wia E160A CNC Lathe #7824 #2, Max Turning Diameter: 11, Max Turning Length: 11.8, Chuck Size: 6, Spindle RPM: 6,000 RPM, Spindle Output: 10/15 HP, X Travel: 6.5, Z Travel: 13, Rapid Traverse: 1,181 IPM, Turret: 12 positions, Hyundia Wia Fanuc i Series Control, LNS Eco Load S2 Bar Feeder, Tailstock, Chip ...more
Hyundai Wia #HD-2200, CNC Lathe, 21.7" swing, 15" diameter x 22" L max, 4000 RPM, 25 HP, 12 tool, 8" chuck, Rigid Tap, Chip Conv., Fanuc I cnc, tailstock, 2018
Revelation Machinery | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Hyundai Wia
Model: HD-2200
Year: 2018
Make: Hyundai Wia, Model: HD 2200, Year: 2018, Machine Location: Upon Request, Chuck Size: 8″ 3 Jaw Hydraulic Chuck, Maximum Swing 21.67″, Maximum Turning Diameter: 15″, Maximum Machining Length: 22.2″, Maximum Bar Capacity: 2.6″, X-Axis Travel: 8.5″, Z-Axis Travel: 22.8″ ...more
Hyundai Wia #HD2200, 2-Axis CNC Lathe, 22.2" machining length, 15" turning diameter, 8" chuck, chip conveyor, tailstock, 2018
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Hyundai Wia
Model: HD2200
Year: 2018
2018 HYUNDAI WIA HD2200 CNC Lathe, in used condition, featuring 22.2" machining length, 2-axis, 8" chuck, 15" turning diameter, tailstock, and chip conveyor., 2018 HYUNDAI WIA HD2200, Machining Length. 22.2", # Axis. 2, Chuck Size. 8", Turning Dia. 15", Tailstock. Yes, Live Tooling. No, Sub Spindle. No, Control. CNC ...more
Hyundai Wia #Kit450, CNC Lathe, 20.8" swing, 12.79" turning diameter, 12.79" machining length, 6" chuck, 1.7" bar, 15 HP, 6000 RPM, 2011
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Hyundai Wia
Model: KIT450
Year: 2011
2011 HYUNDAI WIA KIT450 CNC lathe available: Swing 530 mm, Machining Length 325 mm, Chuck 6 inches, Bar Capacity 45 mm, Power 11 kW, Max RPM 6,000, Turning Dia 325 mm., 2011 HYUNDAI WIA KIT450, Swing. 530 mm, Machining Length. 325 mm, Chuck Size. 6", Bar Capacity. 45 mm, Power. 11 kW, Max RPM. 6,000 RPM, Turning Dia. ...more
Hyundai Wia #L210A, CNC turning center, 21.7" swing, 8" chuck, 2.6" bar, 13.8" dia., 16.1" lgth, 12 turret, A2-6, 4000 RPM, 20 HP, Fanuc I, LNS Super Hydrobar bar feeder, tailstock, tool presetter, 2014
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Hyundai Wia
Model: L-210A
Year: 2014
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Hyundai WIA Fanuc i Series CNC Control, Linear ...more
Hyundai Wia #L230LMSA, multi-axis CNC lathe, Fanuc 32iA, 21.7" swing, 2.6" bar, 2012
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Hyundai Wia
Model: L-230LMSA
Year: 2012
Hyundai Wia L230LMSA Multi-Axis CNC Lathe (subject to buyer verification):Main Spindle Turning Diameter Max:12.200″Main Spindle Turning Length Max: 20.500″Main Spindle Chuck Diameter: 8.300″Main Spindle Max Swing: 21.700Main Spindle Bar Diameter Max: 2.600″Main Spindle 1: RPM: 4,000 HP: ...more
Hyundai Wia #L230LMSA, CNC turning center, 23.6" swing, 8" 3-jaw Samchully MH-208 chuck, 2.6" bar, 12.2" dia., 20.5" length, A2-6, 12 turret, Fanuc I, sub spindle, live tool, tool presetter, rigid tap, 2012
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Hyundai Wia
Model: L-230LMSA
Year: 2012
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Fanuc i Series CNC Control, 4,736 Hours Cutting ...more
Hyundai Wia #L300C, CNC turning center, Fanuc I Series Smart Plus Control, 29.5" swing, 3.5" bar, 15" chuck, 2024
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Hyundai Wia
Model: L-300C
Year: 2024
Hyundai Wia L300C CNC Turning Center (subject to buyer verification):Swing Over the Bed29.5”Swing Over the Carriage18.9”Max. Turning Dia.22”Max Turning Length28.3”Bar Capacity3.5”Spindle bore4”Spindle Speed2800 RPMMotor35/30HPSpindle typeBelt + 2Step GearSpindle NoseA2-8X Axis ...more
Hyundai Wia #L300LC, CNC turning center, Fanuc I Series Smart Plus Control, 29.5" swing, 3.5" bar, 15" chuck, 2024
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Hyundai Wia
Model: L-300LC
Year: 2024
2024 Hyundai Wia L300LCCNC Turning Center (subject to buyer verification):Swing Over the Bed29.5”Swing Over the Carriage18.9”Max. Turning Dia.22”Max Turning Length52”Bar Capacity3.5”Spindle bore4”Spindle Speed2800 RPMMotor35/30HPNo. of Tool12 (subject to buyer ...more
Hyundai Wia #L300MSC, CNC turning center with live milling & sub spindle, 2015
Asset Exchange Corporation | Elk Grove Village, IL
Category: CNC Lathes and Turning Centers
Seller: Asset Exchange Corporation
Location: Elk Grove Village, IL
Mfr: Hyundai Wia
Model: L-300MSC
Year: 2015
Hyundai Wia L300MSC CNC Turning Center With Live Milling and Sub Spindle (2015), ***** From Aerospace Facility *****, Std. Chuck Diameter 12" - 304 381 MM, Std. Chuck Diameter - SUB 8" - 203 MM, Swing Over Bed 750 MM, Swing Over Carriage / Cross Slide 480 MM, Max. Turning Diameter 500 MM, Max. Turning Length 600 MM ...more
Hyundai Wia #L400LC, CNC lathe, 2-Axis, Fanuc 32i-A, 28.5" swing, 83.5" centers, 20" chuck, 6.5" bar, 2012
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Hyundai Wia
Model: L-400LC
Year: 2012
Hyundai Wia L400LC Used CNC Lathe, # Axis 2, Swing 28.5″, Turning Diameter 24.8″, Center Distance 83.5″, Chuck Size 20″, Bar Capacity 6.5″, X-Axis Travel 12.6″, Z-Axis Travel 86.6″, Spindle Nose A2-15, Spindle Speed 2,000 rpm, Main Motor 50 hp, Turret Capacity 12, Tailstock ...more
Hyundai Wia #L500LMA, CNC turning center, 40.6" swing, 24" chuck, 10.8" bar, 27.2" dia., 82.7" lgth, A1-15, 12 turret, Fanuc 32IB, tailstock, sub spindle, live tool, 2024
Used CNC LLC | Huntley, IL
Category: CNC Lathes and Turning Centers
Seller: Used CNC LLC
Location: Huntley, IL
Mfr: Hyundai Wia
Model: L-500LMA
Year: 2024
Enhance your production with the 2024 used HYUNDAI WIA L500LMA CNC Turning Center. s 3-axis, 24" chucks, 10.8" Spindle Bore, 60 hp spindle, Fanuc 32iB, chip conveyor, and tool presetter. Limited 200 hours on time, live tooling included., 2024 HYUNDAI WIA L500LMA, Swing Over Bed. 40.6", Machining Length. 82.7", Turning ...more
Hyundai Wia #L500LMA, CNC big hole box way universal turning center w/milling, 3-Axis, 2024
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Hyundai Wia
Model: L-500LMA
Year: 2024
HYUNDAI WIA L500LMA CNC BIG HOLE BOX WAY UNIVERSAL TURNING CENTER W/MILLING:SWING OVER BED 40.6″MACHINING LENGTH 82.7″CHUCK SIZE 1 24″SPINDLE NOSE 1 A1-15SPINDLE BAR CAPACITY 1 10.8″TURNING DIAMETER, SHAFT DIAMETER 27.2″SPINDLE SPEEDS 1 10.8 RPMSPINDLE HORSEPOWER 1 60 hpSPINDLE BORE ...more
Hyundai Wia #L500LMB, lathe with live milling, Fanuc 32i 3" Axis CNC Control, 40.6" swing, 10.8" Big Bore bar, 24" chucks, 2024
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Hyundai Wia
Model: L-500LMB
Year: 2024
HYUNDAI WIA L500LMB Lathe WITH LIVE MILLING, SWING OVER BED ………………………………. 40.6″, SWING OVER THE CARRIAGE ………………………. 33.5″, MAX TURNING DIAMETER ...more
Hyundai Wia #L2100SY, CNC Turning Center W/Sub Spindle, Very Low Hours, 2018
Kaste Industrial Machine Sale | Enfield, CT
Category: CNC Lathes and Turning Centers
Seller: Kaste Industrial Machine Sale
Location: Enfield, CT
Mfr: Hyundai Wia
Model: L2100SY
Year: 2018
, Main spindle: 4,000 rpm built in spindle, 20 HP, Main Torque 187.5, 2.6 (65mm) bar capacity, Max. turning diameter 13.2, Max. turning length 17.9, Sub spindle: 6,000 rpm built in spindle, 10 HP on the sub spindle, 1.4 bar capacity, Live Tool: 5,000 rpm, 7.4HP (5 min) / 26 lbf.ft torque, X/Y-axis Travel 8.3 / 3.9 ...more
JUST ADDED!
Hyundai Wia #L230C, CNC Lathe, 2-Axis, 16.3" Machining length, 14" Turning diameter, 8" Chuck, 2.5" Bar, 20 HP, 4000 RPM
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Hyundai Wia
Model: L230C
Used CNC Lathe featuring 16.3" machining length, 2 axes, 8" chuck, 2.5" bar capacity, 20 hp, max 4,000 RPM, and 14" turning diameter., HYUNDAI WIA L230C, Machining Length. 16.3", # Axis. 2, Chuck Size. 8", Bar Capacity. 2.5", Power. 20 hp, Max RPM. 4,000 RPM, Turning Dia. 14", Control. CNC (Fanuc).
JUST ADDED!
Hyundai Wia #L300A, CNC Lathe, 2-Axis, 27.7" Swing, 28.4" Machining length, 15" Chuck, 3" Bar, 19" Cutting diameter, 22 kW, 3000 RPM, 12-Position ATC, 2012
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Hyundai Wia
Model: L300A
Year: 2012
Used CNC Lathe featuring FANUC i-Series Control, 12-position ATC, tailstock, and 15" Kitagawa 3-jaw chuck. : Swing 750mm, 3000 RPM, 22kW power, 10" chuck, 76mm bar capacity. Includes chip conveyor and tool presetter., Swing 27.72", Max Cutting Dia 19", Machining Length 28.35", # Axis 2, Chuck Size 10", Bar Capacity ...more
Hyundai Wia #LM-1600TTSY, multi-axis CNC lathe, 2014
Bay Area CNC Machinery | Walnut Creek, CA
Category: CNC Lathes and Turning Centers
Seller: Bay Area CNC Machinery
Location: Walnut Creek, CA
Mfr: Hyundai Wia
Model: LM-1600TTSY
Year: 2014
2014 Hyundai WIA LM-1600TTSY Multi Axis CNC Lathe.
Hyundai Wia #SE-220L, CNC turning center, 2022
Bay Area CNC Machinery | Walnut Creek, CA
Category: CNC Lathes and Turning Centers
Seller: Bay Area CNC Machinery
Location: Walnut Creek, CA
Mfr: Hyundai Wia
Model: SE-220L
Year: 2022
Condition UsedStock Number 47518888101.
JUST ADDED!
Hyundai Wia #SE2200LSY, CNC Lathe, 5-Axis, 23.6" Swing, 8"/5" Chucks, 2.6" Bar, 11.8" diameter x 20.1" L Turning Size, 15/11 HP, 4500 RPM, 2020
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Hyundai Wia
Model: SE2200LSY
Year: 2020
Used 5-Axis CNC Lathe; 8 main and 5 sub chucks, 4.33 Y-axis travel, 11.811 max turning diameter. Fanuc Oi-TF+, chip conveyor, high-pressure coolant, mist collector, washdown gun, and barfeed., Main Chuck Size:8, Sub Chuck Size:5, Swing Over Bed:23.62, Swing Over Carriage:23.62, Max Turning Diameter:11.811, Max Turning ...more
Hyundai Wia #SE2200LSY, CNC lathe with sub/Y-Axis/barfeed, Fanuc 0iTF+, 23.6" swing, 2020
Equipment Hub | Decatur, GA
Category: CNC Lathes and Turning Centers
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Hyundai Wia
Model: SE2200LSY
Year: 2020
Stock #: 121240002, Location: OH, Brand: Hyundai-Wia, Model: SE2200LSY, Year: 2020, Loading Fee: Rigging REquired, Main Chuck Size: 8", Sub Chuck Size: 5", Swing Over Bed: 23.62", Swing Over Carriage: 23.62", Max Turning Diameter: 11.811", Max Turning Length: 20.078", Y Axis Travel: ...more
JUST ADDED!
Hyundai Wia #SKT21LMS-F0I-ID, CNC Lathe, 4000 RPM, Fanuc 0i-TD Controls
HGR24 | Euclid, OH
Category: CNC Lathes and Turning Centers
Seller: HGR24
Location: Euclid, OH
Mfr: Hyundai Wia
Model: SKT21LMS-F0I-ID
JUST ADDED!
Ikegai #ANC-56, CNC Lathe, 2.2" swing, 9.45" machining length, 32" chuck, 11" bar, 400 RPM, tailstock
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Ikegai
Model: ANC-56
Used Ikegai ANC-56 Multi-Axis CNC Lathe available with 56mm swing, 240mm machining length, 32" chuck size, and 11" bar capacity. Power: 60W, Max RPM: 400, Tailstock equipped., IKEGAI ANC-56, Swing. 56 mm, Machining Length. 240 mm, Chuck Size. 32", Bar Capacity. 11", Power. 60 W, Max RPM. 400 RPM, Tailstock. ...more
Ikegai #ANC-56, 56" swing x 240"/157", Fanuc 18T CNC, 11" bore, front & rear turrets, front & rear chucks, boring bar attach., #43299
Prestige Equipment Corp | Melville, NY
Category: CNC Lathes and Turning Centers
Seller: Prestige Equipment Corp
Location: Melville, NY
Mfr: Ikegai
Model: ANC-56
Year: 1996
CAPACITY:, Max Swing over Bed, Both Side: 56", Maximum Swing, Left Side Carriage: 42", Maximum Swing, Right Side Carriage: 36", Distance Between Centers, Right Side. 240":, Distance between Centers, Left Side: 157", Distance Between Chuck Faces: 63", Max Part Length at 11" Diameter: 490", Spindle Speeds, Max ...more
Ikegai #Genesis-1208, CNC lathe, 21.85" swing, 3-jaw 8" chuck, 2" bar, 12 turret stations, 2000
Ditter Industries Inc | Lake Villa, IL
Category: CNC Lathes and Turning Centers
Seller: Ditter Industries Inc
Location: Elk Grove Village, IL
Mfr: Ikegai
Model: GENESIS-1208
Year: 2000
ONE USED IKEGAI BOXED WAY 2-AXIS CNC LATHE, Model: Genesis 1208, Swing: 21.85”, Max. part diameter: 10.2”, Max. part length: 21.65”, Spindle RPM: 5,000, Spindle HP: 20, Max. bar capacity: 2”, Turret stations: 12, Parts catcher, Tail stock, Tool setter, 8” 3-jaw chuck, ATS Md. A6-S20HS ...more
Ikegai #Genesis-1208, CNC lathe, 21.8" swing, 8" chuck, 2" bar, 5000 RPM spindle, 20 HP, 12 stations, Fanuc 21i-t Control, w/ Turbo chip conveyor, 2000
Revelation Machinery | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Ikegai
Model: GENESIS-1208
Year: 2000
Make: Ikegai, Model: Genesis 1208, Year: 2000, Machine Location: Upon Request, Chuck Size: 8″, Bar Capacity: 2″, Swing: 21.85″, Turning Diameter: 11.8″, Spindle Speed: 5,000 RPM, Turret: 12 Station, Spindle Motor: 20 HP, Chip Removal: Turbo Chip Conveyor, Control: Fanuc 21i-T.
Index #ABC, production turning machine, 400 V., 48A, 5000 RPM, live tooling, 2 turret, 13 tool, Siemens 840" C Control, rigid tap, chip conveyor, bar feed, 1998
Franke CNC, LLC | Germantown, WI
Category: CNC Lathes and Turning Centers
Seller: Franke CNC, LLC
Location: Germantown, WI
Mfr: Index
Model: ABC
Year: 1998
, INDEX MBL bar feeder, Chip conveyor, Miscellaneous tooling, Machine is offered subject to availability, prior sale, and terms & conditions of FRANKE CNC Sales Agreement. To the best of our knowledge all listed are deemed correct. It is the Buyer's responsibility to confirm all including condition, capacity ...more
JUST ADDED!
Index #ABC, CNC lathe, Siemens 840C, 65mm capacity, with 12' bar feed, chip conveyor, 2001
Graff-Pinkert & Co | Oak Forest, IL
Category: CNC Lathes and Turning Centers
Seller: Graff-Pinkert & Co
Location: Oak Forest, IL
Mfr: Index
Model: ABC
Year: 2001
INDEX ABC CNC Lathe., Mfd. 2001, Control: Siemens 840C, Capacity 65mm, Ran oil, Still in production, running nylon, With 12-ft Bar Feed (pictured), Chip Conveyor, Comes the a good amount of tooling, Control Type: Siemens SINUMERIK 840C, Spindle Speed (max.): 6,000 RPM, Power Requirements (V/Hz/PH): 400/60/3, Main ...more
Index #C100, production turning macine, 1.6" bar, INDEX Control System C200-4D with flat screen display, 2008
Franke CNC, LLC | Germantown, WI
Category: CNC Lathes and Turning Centers
Seller: Franke CNC, LLC
Location: Germantown, WI
Mfr: Index
Model: C100
Year: 2008
, INDEX control system C200-4D with flat screen display, Chip conveyor, INDEX MBL 42/3700 bar loading magazine, External chiller system, KNOLL paper band filter unit, Collet chuck on main spindle, Collet chuck on counter spindle, Finished parts conveyor, Four (4) used live tool holders with the machine, Eight (8) used ...more
Index #C100, production turning machine for highly productive bar machining, 2008
Franke CNC, LLC | Germantown, WI
Category: CNC Lathes and Turning Centers
Seller: Franke CNC, LLC
Location: Germantown, WI
Mfr: Index
Model: C100
Year: 2008
, INDEX control system C200-4D with flat screen display, Chip conveyor, INDEX MBL 42/3700 bar loading magazine, External chiller system, KNOLL paper band filter unit, Collet chuck on main spindle, Collet chuck on counter spindle, Finished parts conveyor, Three (3) used live tool holders with the machine, Preparation ...more
Index #C200, cnc lathe, 65" mm bar, 5k RPM, C200-4D Control, conveyors, chiller, filter, 2008
Franke CNC, LLC | Germantown, WI
Category: CNC Lathes and Turning Centers
Seller: Franke CNC, LLC
Location: Germantown, WI
Mfr: Index
Model: C200
Year: 2008
, INDEX control system C200-4D with flat screen display, Chip conveyor, INDEX MBL bar loading magazine, KLH Kaltetechnik external chiller, KNOLL paper band filter unit, HAINBUCH SPANNTOP collet chuck on main spindle, HAINBUCH SPANNTOP collet chuck on counter spindle, Finished parts conveyor, Miscellaneous used live ...more
Index #C200, CNC lathe, 3 turrets, 2 spindles, Fanuc 31i-B, with MBL barfeed, 2014
Graff-Pinkert & Co | Oak Forest, IL
Category: CNC Lathes and Turning Centers
Seller: Graff-Pinkert & Co
Location: Oak Forest, IL
Mfr: Index
Model: C200
Year: 2014
INDEX C200 CNC Lathe, 3 Turrets, 2 spindles, Fanuc Control: 31i-Model B, Axial Motorized Switches: 6 pcs, Radial Motorized Switches: 13 pcs, Tool Holders: 11 pcs, Boring Bar Holders: 21 pcs, Pin: 1 pcs Loader Bushings + Sleeves: 51/46/41, New MBL loader bushings: 2 sets, 2 optical scales overhauled by HEIDENHAIN, 1 ...more
Index #C200, production turning machine for highly productive bar machining, 2012
Franke CNC, LLC | Germantown, WI
Category: CNC Lathes and Turning Centers
Seller: Franke CNC, LLC
Location: Germantown, WI
Mfr: Index
Model: C200
Year: 2012
, INDEX control system C200-4D with flat screen display, Chip conveyor, INDEX MBL 65/3700 bar loading magazine, KOOLANT KOOLERS coolant system, KNOLL paper band filter unit, HAINBUCH SPANNTOP Modular Gr. 65 collet chuck on main spindle, HAINBUCH SPANNTOP nova Kombi Axfix Gr. 65 collet chuck on counter spindle ...more
Index Traub #C200, CNC lathe, 2008
Franke CNC, LLC | Germantown, WI
Category: CNC Lathes and Turning Centers
Seller: Franke CNC, LLC
Location: Germantown, WI
Mfr: Index
Model: C200
Year: 2008
Index Traub #C200, CNC Turning Center, 2008
Franke CNC, LLC | Germantown, WI
Category: CNC Lathes and Turning Centers
Seller: Franke CNC, LLC
Location: Germantown, WI
Mfr: Index
Model: C200
Year: 2008
Index Traub #G200YB, CNC lathe, Siemens 840" C Control, 2002
Franke CNC, LLC | Germantown, WI
Category: CNC Lathes and Turning Centers
Seller: Franke CNC, LLC
Location: Germantown, WI
Mfr: Index
Model: G200YB
Year: 2002
Index #G250, 3.5" bar, Siemens D Control, 2-spindles, 3500 RPM, live tools, Steady Rest, 2008
Franke CNC, LLC | Germantown, WI
Category: CNC Lathes and Turning Centers
Seller: Franke CNC, LLC
Location: Germantown, WI
Mfr: Index
Model: G250
Year: 2008
Has only cut aluminum since new.
Index #G250, 5" Axis Turn-Mill Center, 2016
Franke CNC, LLC | Germantown, WI
Category: CNC Lathes and Turning Centers
Seller: Franke CNC, LLC
Location: Germantown, WI
Mfr: Index
Model: G250
Year: 2016
Index #G300, CNC lathe, 9-Axis, 10" chuck, 3.4" bar, 28" turn length, 12 station turret, C200-4 Control, 1996
Franke CNC, LLC | Germantown, WI
Category: CNC Lathes and Turning Centers
Seller: Franke CNC, LLC
Location: Germantown, WI
Mfr: Index
Model: G300
Year: 1996
CNC LATHES G300 SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION: One used 1996 INDEX G300 9-AXIS TWIN SPINDLE TWIN TURRET TURNING MACHINE: Made in Esslingen, Germany -INDEX G300 CNC TURNING MACHINE- Basic machine designed for modular expansion with components listed below: ...more
Index #G300, Turn-Mill Center, LNS Quick Load Servo barfeeder, 1996
Franke CNC, LLC | Germantown, WI
Category: CNC Lathes and Turning Centers
Seller: Franke CNC, LLC
Location: Germantown, WI
Mfr: Index
Model: G300
Year: 1996
, LNS Quick Load Servo barfeeder, Miscellaneous tooling, 3-jaw chuck on main spindle, Collet chuck on sub spindle, Chip conveyor, COOL JET high pressure coolant system, Machine is offered subject to availability, prior sale, and terms & conditions of FRANKE CNC Sales Agreement. To the best of our knowledge all ...more
Index Traub #MS40C-6 Multi Spindle, 2012
Franke CNC, LLC | Germantown, WI
Category: CNC Lathes and Turning Centers
Seller: Franke CNC, LLC
Location: Germantown, WI
Mfr: Index
Model: MS40C-6
Year: 2012
Index Traub #MS40C-6 Multi Spindle, 2010
Franke CNC, LLC | Germantown, WI
Category: CNC Lathes and Turning Centers
Seller: Franke CNC, LLC
Location: Germantown, WI
Mfr: Index
Model: MS40C-6
Year: 2010
Index Traub #R200, 5" Axis turn-mill center, with bar loader, 2009
Franke CNC, LLC | Germantown, WI
Category: CNC Lathes and Turning Centers
Seller: Franke CNC, LLC
Location: Germantown, WI
Mfr: Index
Model: R200
Year: 2009
With bar loader.
My J.h. Day #SGE1500, CNC Lathe, 59.1" swing, 39.1" swing over cross slide, 236" centers, 5.91" bore, 50 HP spindle, 1200 RPM, 12 tool, live tooling, Siemens cnc
Machinery Works Inc | Belgium, WI
Category: CNC Lathes and Turning Centers
Seller: Machinery Works Inc
Location: Belgium, WI
Mfr: J.h. Day
Model: SGE1500
Year: 2025
Jet #CL-16402X, teach lathe, 16" swing, 40" centers, 3-1/8" bore, #5MT, Steady Rest, 4-jaw self-centering chuck, 2010
Greenway & Associates Ltd | Orange City, IA
Category: CNC Lathes and Turning Centers
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Jet
Model: CL-16402X
Year: 2010
4 jaw self-centering chuck Steady rest 4 way automatic turret Manuals.
Jet #CL-1640ZX, CNC lathe, Anilam 4200T Control, 16" swing, 3-jaw 10" chuck, 10 HP, #74504
Yoder Machinery Sales | Holland, OH
Category: CNC Lathes and Turning Centers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Jet
Model: CL-1640ZX
MODEL. CL1640ZX, SWING OVER WAYS. 16", SWING IN GAP. 25-7/8", DISTANCE BETWEEN CENTERS. 40", SPINDLE SPEEDS. 100 TO 2000 RPM, SPINDLE HOLE. 3-1/8", RAPIDS TRAVERSE (X & Y) & Z. 315 IPM & 394 IPM, CARRIAGE TRAVEL. 35", TAIL STOCK TRAVEL. 6", QUILL TRAVEL. 5.12 INCHES, RIDGID TAPPING. YES, 3 JAW CHUCK. 10" ...more
Johnford #HT-60-2D, CNC twin turret lathe, Fanuc 18T, 28.7" swing, 23.6" swing over cross slide, 59" centers, 24" chuck, 5.5" bar, 2004
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Johnford
Model: HT-60-2D
Year: 2004
JOHNFORD HT60-2D Twin Turret CNC Lathe, Max Swing Way Covers 28.7″, Max Swing Over Cross Slide 23.6, Max Distance Between Centers 59″, Standard Chuck Size 24″, Cross Travel (X-Axis)(X2-Axis) 12.6″, Longitudinal Travel (Z1-Axis,Z2-Axis) 59″, Rapid Traverse Rates 590 IPM, Number of Turrets ...more
Johnford #SL-500, CNC turning center, Fanuc 0iTD, 22.8" swing, 10" chuck, 3" bar, 2012
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Johnford
Model: SL-500
Year: 2012
Manufacturer: JOHNFORD, Model: SL-500, Year: 2012, Stock #: 41345, Status: For Sale, Machining Length 31", Swing 22.8", Turning Dia 17.7", Chuck Size 10", Bar Capacity 3", Power 25 hp, Max RPM 3,500 RPM, Tailstock Yes, Control CNC (FANUC 0i-TD), Weight 13668.66.
JUST ADDED!
Johnford #SL-500-CS, CNC Lathe, 22.8" Swing, 28" Machining length, 10" Chuck, 3" Bar, 35 HP, 3500 RPM, 2007
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Johnford
Model: SL-500 CS
Year: 2007
2007 JOHNFORD SL-500 CS, Swing. 22.8", Machining Length. 28", Chuck Size. 10", Bar Capacity. 3", Power. 35 hp, Max RPM. 3,500 RPM, Tailstock. 'Yes', Control. CNC (Fanuc).
Johnford #SL-500A, 22.8" swing, 12" chuck, 4" bar, 35 HP, live tools, 12' barfeeder, 2018
Revelation Machinery | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Johnford
Model: SL-500A
Year: 2018
Make: Johnford, Model: SL-500A, Year: 2018, Machine Location: Upon Request, Chuck Size: 12”, Swing Over Bed: 22.8”, Swing Over Cross: 17.7”, Center Distance: 31”, Y-Axis Travel: 4″, Bar Capacity: 4”, Spindle HP: 35 HP, Spindle Drive: 2 Speed, Spindle Speed: 2,800 RPM, Turret Tools ...more
JUST ADDED!
Johnford #SL-500A, CNC Lathe, 2-Axis, 22.8" Swing, 28" Machining length, 12" Chuck, 4.1" Bar, 17.7" Turning diameter, 35 HP, 3500 RPM, 2010
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Johnford
Model: SL-500A
Year: 2010
Used CNC Lathe, used, 2-axis, with 22.8" swing, 28" machining length, and 35 hp power. s include FANUC Oi-TD CNC Control, 12" chuck, parts catcher, conveyor, and chip conveyor. Wired for 220V/3 phase/60 Hz., Swing over bed- 22.8, Swing over cross slide- 17.7, Spindle taper- A2-11, Spindle bore- 4.5, Spindle speed- ...more
Johnford #SL-500A, CNC lathe turning center, 22.8" swing, 12" chuck, 3-jaw, 4.5" bore, 2800 RPM, A2-11, 12 turret, Fanuc Oi-TD, chip conveyor, 2010
Generation Machine Tools | Sarasota, FL
Category: CNC Lathes and Turning Centers
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Johnford
Model: SL-500A
Year: 2010
JOHNFORD SL-500A CNC Lathe Turning Center 2010’ #7445, JOHNFORD SL-500A CNC Lathe Turning Center 2010’ #7445, Reference # 7445, Model # SL-500A, Serial # TEN10103, Year of manufacture- 3/2010’, Swing over bed- 22.8”, Swing over cross slide- 17.7”, Spindle taper- A2-11, Spindle bore- ...more
Johnford #SL-500CS, 3-Axis CNC Turning Center, 22.8" swing, 10" chuck, 3" bar, 31" centers, 2013
Smith Machinery Co | Ames, IA
Category: CNC Lathes and Turning Centers
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Johnford
Model: SL-500CS
Year: 2013
Swing Over Bed 22.8 inches Swing Over Cross Slide 17.7 inches Center Distance 31 inches Bar Capacity 3 inches Rapid Traverse Z 944 IPM Rapid Traverse X 787 IPM Z-Axis Travel 675.4 inches X-Axis Travel 11.5 inches Chuck Size 10 inches Spindle Nose A2-8 Spindle Speed 3,500 RPM Spindle Motor 25 HP Turret Capacity 12 ...more
Johnford #SL-500CS-Y, 4-Axis CNC Turning Center, 22.8" swing, 3" bar, 28" centers, 2014
Smith Machinery Co | Ames, IA
Category: CNC Lathes and Turning Centers
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Johnford
Model: SL-500CS-Y
Year: 2014
Max Swing 22.83 inches Max Machining Diameter 17.7 inches Center Distance 28 inches Bar Capacity 3 inches Spindle Nose A2-8 Spindle Speed 3,500 RPM Spindle Motor 25 HP Rapid Traverse Rate (X/Z) 591/791 IPM Turret Capacity 12 Tailstock Body 20.86 inches Quill Travel 3.93 inches Machine Weight 15500 pounds.
Johnford #SL-650, CNC lathe, 22.8" swing, 10" chuck, 3" bar, 60" centers, 16.5" dia., A2-8, 12 turret, 3500 RPM, 25 HP, 2-Axis, Fanuc 0i-TC, tailstock, chip conveyor, 2010
Lee Stevens Machinery Inc. | Whitmore Lake, MI
Category: CNC Lathes and Turning Centers
Seller: Lee Stevens Machinery Inc.
Location: Whitmore Lake, MI
Mfr: Johnford
Model: SL-650
Year: 2011
, 2010 Johnford SL-650 CNC Lathe # Axis 2 Swing: 22.8" Turning Diameter: 16.5" Center Distance: 60" Chuck Size: 10" Bar Capacity: 3.0" X-Axis Travel: 11.4" Z-Axis Travel: 60" Spindle Nose: A2-8 Spindle Speed: 3,500 rpm Main Motor: 25 hp Turret Capacity: 12 Tailstock: (Yes) Machine Weight: 16,500 pounds, - Fanuc 0i-TC ...more
Johnford #SL-650, CNC lathe, 22.8" swing, 10" chuck, 3" bar, 60" centers, 16.5" diameter, A2-8, 12 turret, 3500 RPM, 25 HP, 2-Axis, Fanuc 0i-TD, tailstock, chip conveyor, 2013
Westbrook Engineering Co | Warren, MI
Category: CNC Lathes and Turning Centers
Seller: Westbrook Engineering Co
Location: Warren, MI
Mfr: Johnford
Model: SL-650
Year: 2013
2013 Johnford SL650 CNC lathe available. a Fanuc 0i-TD control, 4 axes, live tooling, 10" Samchully 3-jaw chuck, and a 12-position VDI turret. include 22.8" swing, 3,500 rpm spindle, and 25 hp motor., Brand: Johnford, Model: SL650, CNC Control: yes, Control Type: Fanuc 0i-TD, # Axis:4, Swing:22.8", Turning ...more
Johnford #SL-650, 2-Axis CNC Lathe, 22.8" swing, 16.5" turning diameter, 60" machining length, 10" chuck, 3" bar, 25 HP, 3500 RPM, Fanuc Oi-TC, tailstock, 2011
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Johnford
Model: SL-650
Year: 2011
2011 Johnford SL-650 used CNC lathe with Fanuc 0i-TC control. s include 22.8" swing, 60" machining length, 10" chuck, and 25 hp power with 3,500 RPM. chip conveyor, coolant tank, and programmable tailstock., 2011 JOHNFORD SL-650, Swing. 22.8", Machining Length. 60", # Axis. 2, Chuck Size. 10", Bar Capacity. 3", Power. ...more
Johnford #SL-650+C+Y, 3-Axis CNC Lathe, 9.8" X, 55.1" Z, 60" between centers, 22.8" swing, 10" chuck, 3" bar, A2-8, 25 HP, 3500 RPM, Fanuc Oi-TD control, 12-position turret, tailstock, live tooling, **
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Johnford
Model: SL-650+C+Y
Year: 2013
2013 Johnford SL-650+C+Y CNC lathe in used condition s a 22.8" swing, 60" machining length, 3-axis operation, 10" chuck, and 25 hp power. Fanuc Oi-TD control, live tooling, Y-axis, and hydraulic tailstock., Bar Capacity 3", Swing Over Bed 22.8, Swing Over Cross-Slide 17.7", Distance Between Centers 60, Cross Travel ...more
JUST ADDED!
Johnford #SL-650-CS, Multi-Axis CNC Lathe, 22.8" swing, 59" machining length, 10" chuck, 3" bar, C-axis, live milling, barfeed, Fanuc OI-TC, 2005
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Johnford
Model: SL-650-CS
Year: 2005
Used CNC Lathe. s include FANUC OI-TC CNC, C-axis, live milling, and a barfeed. a 10" 3-jaw chuck, tool holders, and more. Dimensions: 205"x83"x86", operating time: 3,799 hrs., SWING OVER BED 579.12 mm, SWING OVER CROSS SLIDE 449.58 mm, X-AXIS TRAVEL 292.1 mm, Z-AXIS TRAVEL 1,498.6 mm, CHUCK SIZE 254 mm, BAR CAPACITY ...more
Johnford #ST-40F, CNC Lathe, 27" Chuck, 30 HP, 500 RPM, Fanuc 0i-TD Control, 36.2" Swing, 2010
Champion Machinery Inc | Fort Mill, SC
Category: CNC Lathes and Turning Centers
Seller: Champion Machinery Inc
Location: Fort Mill, SC
Mfr: Johnford
Model: ST-40F
Year: 2010
, Chuck Size 27", Max Swing Over Bed / Carriage 36.2" / 27.5", Spindle Motor 30 / 25 HP, Spindle Speed 500 RPM, Spindle Nose A2-15, Spindle Bore 10.2", Tools 12, Rapid Traverse Rates (X / Z) 600 / 720 ipm, X-Axis Travel 14.56", Z-Axis Travel 31.5", Machine Dimensions (L x D x H) 218" x 84" x 115", Machine Weight ...more
Johnford #ST-70D, CNC Turning Center, 3-Axis, 31.1" swing, 6.5" bar, 18" chuck, 35" x 50" turning capacity, 7.3" hole, 7.25" bore, 12 Tools, 2011
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Johnford
Model: ST-70D
Year: 2011
Johnford ST70D CNC Turning Center, SWING 31.1″, # AXIS 3, BAR CAPACITY 6.5″, POWER 50 hp, MAX RPM 1,000 RPM, TAILSTOCK Yes, CONTROL CNC (Fanuc 0i-TD), WEIGHT 13,250 kg, 18” Schunk Air Chuck with 7.3” Hole, Spindle ...more
Johnford #ST-130A, 2-Axis CNC Lathe, 36.2" swing, 27.5" turning diameter, 130" machining length, 12" chuck, 4.1" bar, A2-11, 50 HP, 3000 RPM, 12 tool, 2002
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Johnford
Model: ST-130A
Year: 2002
Used CNC Lathe. Key : 36.2" swing, 130" machining length, 50 hp, 3000 RPM, 2-axis, 12" chuck, 4.1" bar capacity, 27.5" turning diameter, hydraulic programmable tailstock. Used condition., Swing over bed/Front cover 36.2", Standard turning diameter 27.5", Swing over carriage 27.5", Maximum cross travel (X axis) 15.7" ...more
Johnford #ST-130BX-HP+ATC, CNC lathe, 47.2" swing, 15" chuck, 4.6" bar, A2-11, Siemens 840D, tailstock, chip conveyor, 2009
GCH Machinery | Warren, MI
Category: CNC Lathes and Turning Centers
Seller: GCH Machinery
Location: Warren, MI
Mfr: Johnford
Model: ST-130BX-HP+ATC
Year: 2009
Johnford ST-130BX-HP+ATC CNC Lathe, Siemens 840D Controller, 1200mm Swing Over Bed, 925mm Swing Over Cross Slide, Auto Lubrication With Arm, 2800 x 1250mm Capacity, From Aerospace Facility, BEST PRICING IF PURCHASED WHILE STILL, IN PLANT UNDER POWER, JOHNFORD ST-130BX-HP+ATC CNC LATHE, S/N TCG9053 YEAR: 2009 ...more
Johnford #ST-130C, CNC Lathe, 36.2" swing, 27.6" swing over cross slide, 20"/24" chuck, 5.5" bar, 7.9" spindle diameter, 6" bore, A2-15, 12 tool, 30/37 HP, 1500 RPM, Fanuc 18-T Control
Smith Machinery Co | Ames, IA
Category: CNC Lathes and Turning Centers
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Johnford
Model: ST-130C
Year: 1999
SWING OVER BED -------------------- 36.2 in, SWING OVER CROSS SLIDE ------------ 27.6 in, CHUCK SIZE ------------------------ 20.1 in, 24 in, BAR CAPACITY ---------------------- 5.5 in, SPINDLE NOSE ---------------------- A2-15, SPINDLE BORE ---------------------- 6 in, SPINDLE SPEED, STEP(S) ------------ AUTO 4 ...more
JUST ADDED!
Johnford #ST-70DH, CNC Lathe, 2-Axis, 36.2" Swing, 67" Centers, 18" Chuck, 6.5" Bar, 100 RPM, 12-Station Turret, 2018
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Johnford
Model: ST-70DH
Year: 2018
Multi-axis CNC lathe, used but in good condition. s 36.2" swing, 18" chuck size, 6.5" bar capacity, and max RPM of 100. auto tool presetter, tailstock, parts catcher, and Fanuc OiT-F., Distance Between Centers 67", Turret 12 Station.
Jyoti #ATM-160, inverted vertical turret lathe, Y-Axis, 6" chuck, 1.5" bar, 27.5"X, 7.87"Y, 11.8"Z, 2016, S46764
Perfection Global | Elk Grove Village, IL
Category: CNC Lathes and Turning Centers
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Jyoti
Model: ATM-160
Year: 2016
Capacity Chuck Size: 6”Max. Turning Length: 7.9”Max. Turning Diameter: 6”Travels Cross Travel (X-Axis): 27.5Longitudinal Travel ( Z-Axis): 11.8”Traverse (Y-Axis): 7.9”Rapid Feed: 50 m/minMain Spindle Spindle Nose (Flat Ø): 140Speed Range: 50-7000 RPMFull Power Speed ...more
Jyoti #ATM-160, inverted vertical turret lathe, Y-Axis, 6" chuck, 1.5" bar, 27.5"X, 7.87"Y, 11.8"Z, 2017, S46765
Perfection Global | Elk Grove Village, IL
Category: CNC Lathes and Turning Centers
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Jyoti
Model: ATM-160
Year: 2017
Capacity Chuck Size: 6”Max. Turning Length: 7.9”Max. Turning Diameter: 6”Travels Cross Travel (X-Axis): 27.5"Longitudinal Travel (Z-Axis): 11.8”Traverse (Y-Axis): 7.9”Rapid Feed: 164 FPMMain Spindle Speed Range: 50-7000 RPMFull Power Speed Range: 1500-4500 RPMC-Axis ...more
JUST ADDED!
Jyoti #DX-250, CNC lathe turn-mill center, 2014
Machinery Max | Punta Gorda, FL
Category: CNC Lathes and Turning Centers
Seller: Machinery Max
Location: Butler, WI
Mfr: Jyoti
Model: DX-250
Year: 2014
Make, Jyoti, Model, DX-250, Serial Number, 60008869-2014B, Year, 2014, Phase, 3 PHASE, Voltage, 220 VOLT, Estimated Dimensions, See photos and, Estimated Weight, 13,000 Lbs, Seller Comment, A rigger is required. Buyer's Responsibility for Break-down, loading and removal. By appointment ONLY!, Load Fee, Lot Notes ...more
Jyoti TS 120, Automated Turning Center Pro Shear Machine CNC Lathe, 2016
Revelation Machinery | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Jyoti
Model: TS 120
Year: 2016
Make: Jyoti, Model: TS 120, Year: 2016, Machine Location: Upon Request, Slides, X-Axis Travel: 3”, Z-Axis Travel: 5.7”, Rapid Feed (X & Z axis): m/min 24, Main Spindle, No. of spindles 2, Spindle Motor Power – Siemens kw 8.3/5.5, Spindle Motor Power – Fanuc kw 7.5/5.5, Spindle Speed Range ...more
Kent USA #CHL, KLR, CHS, CSC, CNL, CRL, CSM, Series CNC Precision Lathes, new, #12901, 12900, 12899, 12857, 12856, 12854, 12852
Blumberg Machinery Co | Bannockburn, IL
Category: CNC Lathes and Turning Centers
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Kent
Model: CHL
KENT USA MODEL CNL-1740 CNC PRECISION LATHE - NEW PRODUCT S, 15 HP Fanuc Servo Spindle motor4 operating modes: Manual, Teach-in, Conversational, and CNCRigid Meehanite castings with extra ribbingInduction hardened and ground ways4 speed Auto-shifting gearbox with alloy steel gears that are hardened and groundExtra ...more
Kent #CKE-2660, CNC Lathe, 26" swing, 60" between centers, 16.9" swing over cross slide, 56" X, 12" Y, 10 HP, 2200 RPM, 2009
Yoder Machinery Sales | Holland, OH
Category: CNC Lathes and Turning Centers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Kent
Model: CKE-2660
Year: 2009
SERIAL. G01674MODEL. CKE 2660YEAR NEW. 2009SWING OVER BED WAYS. 26"SWING OVER CROSS SLIDE. 16.9"DISTANCE BETWEEN CENTERS. 60"SPINDLE SPEEDS. 7 TO 2200 RPMDIAMETER OF SPINDLE HOLE. 3-1/16"LONGITUDINAL TRAVEL. 56"CROSS TRAVEL. 12"CHUCK.POSITIONING ACCURACY. 0.0005"REPEATABILITY. 0.0002"SERVO & INPUT RESOLUTION. ...more
Kent #CMD-70320, CNC oil country lathe, 70" swing, 8.3" bore, 4-Jaw chucks optional, Fanuc 0i-TD, 1.3 HP, new, #12882
Blumberg Machinery Co | Bannockburn, IL
Category: CNC Lathes and Turning Centers
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Kent
Model: CMD-70320
70" x 315" KENT USA MODEL CMD-70320 CNC OIL COUNTRY LATHE - NEWSTANDARD ACCESSORIESCNC controller: FANUC 0i-TD or FAGOR 8055i AC spindle motorAuto lubrication systemCoolant systemSpindle Oil CoolerH4 or V8 hydraulic turretChuck guard and Turret guard, Control Panel Moving Along with CarriageRear Splash Guard and Chip ...more
Kent #CRL-1640, precision teach lathe, 16" swing, 2" bar, 35" centers, 10.9" diameter, 35" length, tailstock, Cam D1-6
T R Wigglesworth Machinery | Bedford, OH
Category: CNC Lathes and Turning Centers
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Kent
Model: CRL-1640
10 HP Peak Fagor Servo Spindle motor, Manual and CNC mode, Rigid Meehanite castings with extra ribbing, Induction hardened and ground ways, 2 speed semi-automatic gearbox with alloy steel gears that are hardened and ground, Extra large precision ground ballscrews, 25-3000 RPM range; electronic handwheels, Auto Lube ...more
Kent USA #CRL-1640, CNC precision lathe, Fanuc 0iTF, 16" swing, 35" centers, 8.6" swing over cross slide, 2022, #19182
Blumberg Machinery Co | Bannockburn, IL
Category: CNC Lathes and Turning Centers
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Kent
Model: CRL-1640
Year: 2022
KENT USA CRL-1640 CNC PRECISION LATHE, New 2022, Fanuc 0i-TF CNC Controls, Induction Hardened and Ground Ways, Auto Lube, 8-Position Turret, Coolant, Royal Live Center, 8" Hydraulic 3-Jaw Chuck, Swing Over Bed 16", Swing Over Cross Slide 8.6", Distance Between Centers 35", Width of Bed 10.23", Spindle Nose A2-5 ...more
JUST ADDED!
Kent CNC #KLS-1840N, CNC lathe, 39.4" centers, 3" spindle bore, 2000 RPM, 7.5 HP, Fanuc 0i, 2013
Star Equipment Co., Inc. | Utica, MI
Category: CNC Lathes and Turning Centers
Seller: Star Equipment Co., Inc.
Location: Utica, MI
Mfr: Kent
Model: KLS 1840N
Year: 2013
Kent KLS1840N CNC Lathe, (subject to buyer verification):, Swing Over Bed18, Swing Over Cross Slide 9.84, Distance Between Center 39.4, Max Length of Work Piece 39.37, Width of Bed 13.8, Spindle Nose D8, Spindle Bore 3, Spindle Taper M.T. #7, Spindle Speeds 100-2000 RPM, Longitudinal Travel (Z-Axis) 38, Cross Slide ...more
Kent #KLS-1840N, cnc lathe, 18" swing, 9.8" swing over cross slide, 39.4" centers, 39.4" max L, 13.8" bed, 100-2k RPM, 3" spindle bore, 7.5 HP, Fanuc Series Oi Mate-TD, 2013
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Kent
Model: KLS-1840N
Year: 2013
Kent KLS1840N CNC Lathe (subject to buyer verification): Swing Over Bed18″Swing Over Cross Slide 9.84″Distance Between Center 39.4″Max Length of Work Piece 39.37”Width of Bed 13.8″Spindle Nose D8Spindle Bore 3″Spindle Taper M.T. #7Spindle Speeds 100-2000 RPMLongitudinal Travel ...more
JUST ADDED!
Kent #KLS-1840N, CNC Lathe, 18.1" swing, 9.4" swing over cross slide, 39.4" centers, 2" bore, 2500 RPM, 7.5 HP, 8 ATC, Fanuc Oi Mate-TD, tailstock, 2013
Revelation Machinery | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Kent
Model: KLS-1840N
Year: 2013
Make: Kent, Model: KLS-1840N, Year: 2013, Machine Location: Texas, Bar Capacity: 3″, Chuck Size: 10″, Max Swing Over Bed: 18.11″, Max Swing Over Cross slide: 9.45″, Distance Between Centers: 39.37″, Max Turning Length: 39.37″, Max Turning Diameter: 18.11″, Bed Width: ...more
JUST ADDED!
Kent #KLS-1840N, CNC Lathe, 18.1" swing, 39.4" machining length, 220V, 3-phase, 60 Hz, coolant system, turret, chuck, 2013
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Kent
Model: KLS-1840N
Year: 2013
Used CNC Lathe for sale. s max swing 460mm, workpiece length 1000mm. Operates at 220V, 3-phase, 60Hz. Comes with coolant system, turret, and chuck., Max swing over bed: 460 mm (18.1), Max workpiece length: 1000 mm (39.4), Voltage: 220V, Phase: 3-phase, Frequency: 60 Hz, Capacity: 12 kVA, Max cut-off: 5 kA, Protection ...more
Kia Machine Tool #KIT-30A, CNC Lathe, w/Foot Pedal, 1.75" Bore, 20 kVA, 200/220 V, 1995
HGR24 | Euclid, OH
Category: CNC Lathes and Turning Centers
Seller: HGR24
Location: Euclid, OH
Mfr: Kia
Model: KIT-30A
Year: 1995
Inventory No. 1225-102-0004 Manufacturer Kia Machine Tool Model No. KIT-30A Name CNC Lathe Arrival Date 02-20-2026 Dimensions L x W x H (inches) Unavailable Electrical 3/50/60/200/220/240 Weight (lb.) 5120 Category CNC Condition Used Available Quantity 1 Serial No. KIT 301013 Make Year 1995 Item Bore 1.75", 20 Kva, W/ ...more
Kia #KIT30A, Turning Center, 18.9" swing, 6" chuck, 1.5" bar, Fanuc 0-T, S/N 30980
Smith Machinery Co | Ames, IA
Category: CNC Lathes and Turning Centers
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Kia
Model: KIT30A
Max Swing Over Bed 18.9 inches Max Swing Over Cross Slide 6.69 inches Max Part Diameter 5.9 inches Max Part Length 7.9 inches Standard Chuck Size 6 inches Cross Travel (X-Axis) 9.8 inches Longitudinal Travel (Z-Axis) 15.7 inches Rapid Traverse Rate (X-Axis) 1,181 IPM Rapid Traverse Rate (Y-Axis) 1,181 IPM Type of Tool ...more
