51 - 100 of 117 listings
3" x .23" (76mm x 6mm) Oto Mills #766, Tube Mill, 250mm x 6mm strip, 140 MPM, R-L, 2005, Unused
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Model: 766
Year: 2005
MATERIAL.Carbon steel 360N/mm2, STRIP WIDTH.78mm to 250mm, STRIP THICHNESS.2mm to 6mm, TUBE DIAMETER.25.4mm to 76.2mm, SQUARE PROFILE SECTIONS.20 x 20mm to 60 x 60mm, RECTANGULAR PROFILE SECTIONS.20 X 40mm TO 80 X 80mm, MAXIMUM SPEED.140 m/min, COOLING SYSTEM.Emulsion 600 l/min max, WELDING SET-UP.High Frequency, Line ...more
3" AEF, tube mill gearboxes
Universal Tube & Rollform | Perrysburg, OH
Category: Tube Mills
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Aef
UTUBE NUMBER: 4073, MANUFACTURER: AEF, Forming/Fin/Sizing Gearboxes from 3″ AEF Tube Mill, 8 to 1 Worm Ratio, OVERALL DIMENSIONS: 2′ x 12′ x 3′, APPROXIMATE WEIGHT: 6,000 Lbs., LOCATION: Universal Warehouse, Perrysburg, Ohio, Are you Searching for Specific Machinery? Our inventory is always ...more
3-1/2" x .08" -.250" Mannesmann Demag tube mill, mandrel type double uncoiler
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Mannesmann Demag
Tube Diameter.1" - 3-1/2" (26.7mm - 88.9mm), Wall Thickness.0.080" -.250" (2.0mm - 6.3mm), Mill Speed.400 ft/min (120 m/min), Max, Tube Length.5' - 46' (1.5M - 14M), LINE CONFIGURATION, DOUBLE UNCOILER, MANDREL TYPE, Coil ID.24" (610mm), Strip Width.3" - 11" (75mm - 280mm), Snub Roll, Peeler Table, Crop Shear ...more
3.5" x .135" Aef, tube mill, 150 HP, 10' coolant trough
D & H Machinery Inc | Toledo, OH
Category: Tube Mills
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Aef
-3.5" x 3.5" Square, -3" x 5" Rectangle (tooling in Mill), -Line Direction: Right to Left, -Material Thickness: 0.135" Consisting of the following:, -Dahlstrom Coil Car: AC Motor Drive AC Motor Jack Screw Lift Floor Mounted Rails, -Dahlstrom Uncoiler: 18" Wide with 4 Keepers AC Gear Motor with Clutch Drive Hydraulic ...more
3.5" x 0.125" Abbey Etna, Stainless Laser Rafted Tube Mill, 13" spindle, 5KW Laser, 50FPM, L-R, 1999, rebuilt 2016
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Abbey Etna
Year: 1999
, Max. OD: 3.5", Min OD: 1", Max Wall:.125", Min Wall:.025", Forming Roll Space: 13", Fin and Sizing Roll Space: 5", Spindle Diameter: 2.5", Root Diameter (Forming, Fin and Sizing): 5", Welding Capacity: 5KW Laser, Max Mill Speed: 50FPM, Min Mill Speed: 10FPM, Mill Direction: Left to Right, Power Supply: 480V/3 ...more
Get email updates for newly added Tube Mills
Tube Mills (also known as pipe mills or tube rolling machines) are industrial machines used to produce tubes and pipes by shaping and welding metal strips into cylindrical forms. Commonly used in industries like construction, automotive, and oil and gas, these mills manufacture high-quality tubes with precise dimensions and consistent wall thickness. Tube mills are essential for producing large volumes of tubing for structural, mechanical, and fluid-handling applications.
4" x .157" Aogang, 102mm x 4mm tube mill (mill only), 100 meters/minute, brand new, never used
Midwest Machinery LLC | Livonia, MI
Category: Tube Mills
Seller: Midwest Machinery LLC
Location: Livonia, MI
Mfr: Aogang
Make: Aogang, Condition: Brand New (Never Used), Mill Diameter: 25mm - 102mm, Material Thickness: 0.8mm - 4mm, Square Tube: 20 x 20 - 80 x 80, Strip Width: 80mm - 320mm, Material: HR, CR, Galv,., Tensile Strength: 520 Mpa / Yeild: 240Mpa, Mill Speed: 100 meters per minute, Direction: Left to Right, Double Mandrel ...more
4" x .25" (101mm x 6mm) Voest Alpine, Rafted Cage Forming Tube Mill, 100 MPM, 100mm shaft
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Voest
Tube Diameter Range: 51mm - 101mm, Thickness Range: 2 - 6mm, Speed: 100 MPM, 100mm Shaft Diameter, Complete Mill with the Following Components:, Entry Turnstile, Mandrel Uncoiler, Peeler, 6 Roll Straightener, Shear and End Welder, Horizontal Accumulator, 3 Forming Stands, H-Bending Stand, Cage Forming Section, 2 Finn ...more
4-1/2" x 6" mm MAS Seuthe, tube mill, used
Freedom Machinery Company Inc | Grand Rapids, OH
Category: Tube Mills
Seller: Freedom Machinery Company Inc
Location: Grand Rapids, OH
5" x .18" Abbey Etna tube mill line. 1"-5" round tube, 4" square tube, 2" x6" rectangle,.049"-.180" wall thickness, 250 FPM L to R
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Abbey Etna
Round Tube Diameter: 1" - 5", Max Square Tube: 4", Max Rectangle: 2" x 6", Wall Thickness:.049" -.180", Line Speed: 250 FPM, Maximum D/T Ratio: 50:1 Approx, Minimum D/T Ratio: 14:1. Approx, Line Direction: Left to Right, Complete Line with:, 3 Arm Loopco Turnstile, Entry L-Type Coil Car, Mandrel Uncoiler, Loopco ...more
5" x 0.16" Dowon, HF Tube Mill, 0.06"-0.18" wall, 20" ID, 78.7" outside dimension, RL, 127mm diameter, 4mm wall, 2001
Midwest Machinery LLC | Livonia, MI
Category: Tube Mills
Seller: Midwest Machinery LLC
Location: Livonia, MI
Year: 2001
Make: Dowon Engineering (Korea), Diameter: 60mm x 127mm, Wall Thickness: 1.5mm - 4.5mm, Speed: 70 meters per minute, Direction: R - L, Year New: 2001, Power: 380V x 60Hz / 220V x 60Hz, Material: HR, CR, GI, HGI, Coil Width: 140mm - 400mm, Coil ID: 508mm, Coil ODL 2000mm, Coil Weight: 10,000Lbs, Mandrel Uncoiler ...more
5" x 0.25" ERW, tube mill, RL, 200 FPM, 4+3 form stands, w/ tooling
VX Machinery | Sylvania, OH
Category: Tube Mills
Seller: VX Machinery
Location: Sylvania, OH
, Manufacturer: Birlik Makine (Turkey), Material Capability: HRC / CRC / Galvanized, Yield Strength: 355 MPa, Mill Direction: Right-to-Left, Mill Speed: 60 m/min ( 200 FPM), HF Welder: 300 kW Solid State, Tube Size Range:, Round: 48 – 127 mm ( 1.89” – 5”), Square: 40×40 – ...more
5" Yoder #M3, 9 stand, 7 driven form stand, 3" shaft, 19" roll, tig welder, Turks hds, 1956
Pearl Equipment Co | Nashville, TN
Category: Tube Mills
Seller: Pearl Equipment Co
Location: Nashville, TN
Mfr: Yoder
Model: M3
Year: 1956
YODER M3 TUBE MILL, 9 STAND - 7 DRIVEN FORMING STANDS, 2 SIZING STANDS, 3" SHAFT, 24" HORIZONTAL CENTERS, 18" ROLL SPACE, JOG CONTROL, BEAD FLASHER/SCARFER, FLYING CUT-OFF ABRASIVE WHEEL, TOOLING: 1-5/8", 3-1/2", 2-3/8"-2-7/8", 1/2 TURKS HEAD, 40 HP DC VARIABLE SPEED DRIVE, POWER SUPPLY ...more
5" Olimpia #70/120 Olimpia steel laser tube mill, R to L, 5 ton single arm uncoiler, manual strip end welder
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Olimpia
Model: 70/120
127mm Olimpia 70/120 Stainless Steel Laser Tube Mill, MANUFACTURER - OLIMPIA, MODEL - 70/120, MATERIAL - STAINLESS STEEL, CAPABILITY - ROUND, SQUARE & RECTANGLE, OD RANGE - 51MM - 127MM, THICKNESS RANGE - 1.5MM - 5.0MM, TUBE LENGTH - 6 METERS MAX, WELDER - LASER, LINE DIRECTION - RIGHT TO LEFT, LINE COMPONENTS:, 5 ...more
5" (127 mm) Turek & Heller #W-35 TIG tube mill, #3825
Universal Tube & Rollform | Perrysburg, OH
Category: Tube Mills
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Turek & Heller
Model: W-35
UTUBE NUMBER: 3825, MANUFACTURER: TUREK & HELLER, MODEL NUMBER: W-35, Line Direction: Right to Left, Maximum Tube Diameter: 5″ (127 mm), Minimum Tube Diameter: 2″ (50.8 mm), Maximum Line Speed: 30 FPM Gear In no Load, Maximum D/T Ratio: 50:1, Minimum D/T Ratio: 10:1, GEAR BOX DATA:, Roll Space Forming: ...more
5" (127 mm) Turek & Heller #W-35 TIG tube mill, #3826
Universal Tube & Rollform | Perrysburg, OH
Category: Tube Mills
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Turek & Heller
Model: W-35
UTUBE NUMBER: 3826, MANUFACTURER: TUREK & HELLER, MODEL NUMBER: W-35, SERIAL NUMBER: MC3960.BC, Line Direction: Right to Left, Maximum Tube Diameter: 5″ (127 mm), Minimum Tube Diameter: 3″ (76 mm), Maximum Line Speed: 30 FPM Gear In no Load, Maximum D/T Ratio: 50:1, Minimum D/T Ratio: 10:1, GEARBOX ...more
5.5" x .2" (139mm x .200" ) Ocevi Pipe Mill Line, 1990, upgraded 2018
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Year: 1990
Year 1990 (Ugraded in 2018), Tube Diameter: 48mm - 139mm, Structurals: 40mm x 40mm - 100mmx 100mm, Wall Thickness: 1.0mm - 5.0mm, Line Speed: 100 Meters/min, Shaft Diameter: 130mm, Tooling: OD 48mm, 63mm, 76mm, 89mm, 127mm, 139mm, Square: 50mmx 50mm, 60mmx 60mm, 70mm x 70mm, Rectangular: 40mm x 80mm, 60mm x 80mm, 80mm ...more
6" x .12" Abbey Etna #6-SXU, tube mill, 200 FPM, 21" roll space, entry guide, 1979
Universal Tube & Rollform | Perrysburg, OH
Category: Tube Mills
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Abbey Etna
Model: 6-SXU
Year: 1979
UTUBE NUMBER: 3890, MANUFACTURER: ABBEY ETNA MACHINE CO., MODEL NUMBER: 6 SXU, SERIAL NUMBER: 10680-11366-11925, YEAR: 1957 – 1966 – 1979, Maximum Tube Diameter: 6″ (152 mm), Minimum Tube Diameter: 1.900″ (48.2 mm), Maximum Wall Thickness:.120″ (3 mm), Minimum Wall Thickness:.042″ ...more
6" x .12" Abbey Etna #6SXU, tube mill, forming mill, welding section, sizing mill, tooling
Galaxie Corporation | Wayne, MI
Category: Tube Mills
Seller: Galaxie Corporation
Location: Wayne, MI
Mfr: Abbey Etna
Model: 6SXU
Manufacturer: Abbey Etna Machine Co., Model Number: 6SXU, Tube Diameter Range: 1.9 (48.2mm) 6 (152mm), Wall Thickness Range:.042 (1.1mm) -.120 (3mm), Forming Roll Space Width: 21 (533mm), Fin & Sizing Roll Space Width: 8 (203mm), Driven Spindle Diameter: 2-1/2 (63.5mm), Gear Box Data: Abbey 4K, 15:1 Ratio ...more
6" x 0.25" ERW, Tube Mill, 197 FPM mill, w/ tooling, new, 2024
VX Machinery | Sylvania, OH
Category: Tube Mills
Seller: VX Machinery
Location: Sylvania, OH
Year: 2024
, Round Tube OD Capacity: 2” – 6” (51mm – 168mm), Square Tube Capacity: 1.57” x 1.57” – 5.12” x 5.12” (40×40mm – 130×130mm), Rectangular Tube Capacity: 1.18” x 1.57” – 5.51” x 4.72” (30×40mm – ...more
JUST ADDED!
6.504" x 0.217" MTM, Tube Mill Line, RL, 311.7 FPM, upgraded controls 2022, tooling, 1995
VX Machinery | Sylvania, OH
Category: Tube Mills
Seller: VX Machinery
Location: Sylvania, OH
Year: 1995
, Manufacturer: MTM, Diameter Range: 31 mm – 165.2 mm (1.220” – 6.504”), Wall Thickness Range Rounds: 1.8 mm – 5.5 mm (0.071” – 0.217”), Wall Thickness Range Squares & Rectangles: 2.8 mm – 5.5 mm (0.110” – 0.217”), Max Mill Speed: 95 MPM ...more
6.6" x 0.28" DMC, Tube Mill Line, 19.69'-39.37' tube L, 197 FPM, w/ parts
VX Machinery | Sylvania, OH
Category: Tube Mills
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Dmc
, Tube OD Max: 6.63” (168.3 mm) / Min: 2.00” (50.8 mm), Wall Thickness Max: 0.276” (7.0 mm) / Min: 0.055” (1.4 mm), Tube Cut Length Max: 39.37’ (12,000 mm) / Min: 19.69’ (6,000 mm), Line Speed Max: 197 FPM (60 m/min) / Min: 66 FPM (20 m/min), Complete Line With:, Coil Lifting Car ...more
6.6" x 0.28" OTO, Tube Mill Line, 295 FPM, tooling, 2003
VX Machinery | Sylvania, OH
Category: Tube Mills
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Oto
Year: 2003
, Manufacturer: OTO, Strip Width: Min 7.80” Max 20.87”, Strip Thickness: Min.079” Max.280”, Tube Diameter Range: 2.50” – 6.62”, Square Tube Range: 2.0” – 5.12”, Rectangular Tube Range: 2.36” x 1.57” to 6.30” x 3.94”, Maximum Line ...more
6.6" x 0.3" DMC, HF Tube Mill & Automatic Packaging Line, 65.6-196.9 FPM, 24" ID, 63"-78.7" outside dimension, 168mm x 7mm, 2018
Midwest Machinery LLC | Livonia, MI
Category: Tube Mills
Seller: Midwest Machinery LLC
Location: Livonia, MI
Mfr: Dmc
Year: 2018
Make: DMC (Korea), Year New: 2018, Material: HR, CR, Pipe Diameter: 50mm - 168mm, Wall Thickness: 1.4mm - 7mm, Speed: 20 - 60 mpm, Pipe Cut Tolerance: 2mm, Max Pipe Length: 6 - 12 meters, Coil Width: 150mm - 600mm, Coil ID: 610mm, Coil OD: 1600mm - 2000mm, Coil Weight: 12 ton, Entry Floor Standing Coil Cat, Mandrel ...more
6-5/8" x 6" mm OME tube mill, used
Freedom Machinery Company Inc | Grand Rapids, OH
Category: Tube Mills
Seller: Freedom Machinery Company Inc
Location: Grand Rapids, OH
JUST ADDED!
6.626" x 0.276" DMC, Tube Mill Line, 196.85 FPM, tooling, 2019
VX Machinery | Sylvania, OH
Category: Tube Mills
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Dmc
Year: 2019
, Manufacturer: DMC, Tube Outer Diameter Max: 168.3 mm (6.626”), Tube Outer Diameter Min: 50.8 mm (2.000”), Wall Thickness Max: 7.0 mm (0.276”), Wall Thickness Min: 1.4 mm (0.055”), Tube Cut Length Max: 12,000 mm (472.44”), Tube Cut Length Min: 6,000 mm (236.22”), Line Speed Max: 60 ...more
7" (177mm) Abbey Etna, 6KU API Tube Mill, 400 kW Welder, Hydrostatic Tester
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Abbey Etna
Thickness Range: 2.65mm to 7.20mm, Shaft Diameter: 4.5", Abbey Etna 6KU API Consisting of:, Coil Storage Unit, Double Cone Uncoiler, Hold Down Roll, 5 Roll Sheet Straightener, 60HP DC Motor, Shear and End Welder, Under Ground Accumulator, Double Pinch Roll Pull Out Stand, Entry Guides, Abbey Etna 4 Forming Stands ...more
7-1/2" x 3/8" Abbey Etna, Rafted Pipe Mill Line, 200 FPM, L-R, upgraded 2014
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Abbey Etna
Tube Diameter: 2 3/8" - 7 1/2", Wall Thickness:.125" - 3/8", Mill Speed: 200 FPM, Tube Length: 16'- 60', COMPLETE TUBE MILL LINE INCLUDING, Quick Change Mill with Spare Set of Rafted Stands, OTO MILLS Shear & End Welder New, 2014 Drives and Gear Boxes New, 2014 OTO MILLS TAC 90 Cut Off Saw New in 2018 ...more
8" x .4" Yoder/Thermatool, API Cage Forming ERW Tube Mill, 67" outside dimension, R-L
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
8" (203mm) YODER/THERMATOOL API CAGE FORMING ERW TUBE MILL, THIS IS A 8" (203MM) API TUBE MILL ALONG WITH ROLLER CONVEYOR & PIPE TRANSFER, TABLES TO STRAIGHTEN, END BEVEL, HYDROSTATIC TEST, NDT/ULTRASONIC TEST &, BUNDLE FINISHED API TUBES., CAPABILITY - 4.5"-8", WALL THICKNESS -.188"-.400" (4.7mm-10mm), COIL OD - ...more
8" x 0.33" (216mm x 8.5mm) Tube Mill, 610mm ID, 2200mm outside dimension, 60 MPM, Saw Cut off
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Pipe Dia: 89.1 - 216.3mm (3-8"), Thickness: 2.0-8.5mm, Hoop Width: 260-700mm, Max Coil Weight: 10,000 KGS/Coil ( Slitted Coil), Inner Dia of Coil: 508-610mm, Outside Coil Dia: 1,000-2200mm, Material: Low Carbon Steel, Slitted Coil, Line Speed: 25-60 m/min (Designed Line Speed), H.F. Welder: Output Capacity: 350 kw ...more
8" ERWTech / UCG, high frequency tube mill line, new
Universal Tube & Rollform | Perrysburg, OH
Category: Tube Mills
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Erwtech / Ucg
Quality-built machinery from ERWTech and services from UCG offers new tube mill lines that are dependable, affordable, and fully supported out of NW Ohio, USA., Services provided by UCG include start-up and commissioning, installation management, training for your staff, in-stock common replacement parts for quick ...more
8" Zikeli, tube mill, L to R entry, welding section, cooling section, sizing section, cutoff section
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Zikeli
8.5" x 0.4" (219mm x 10mm) Voest Alpine, Rafted Cage Forming Tube Mill, 150mm shaft, 80 MPM, upgraded 2008
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Tube Diameter: 219mm, Thickness Range: 2mm - 10mm, Upgraded: 2008, Cage Forming Design, Shaft Diameter: 150mm, Speed: 80 MPM, Coil Weight: 20 Ton, Thickness: 2mm - 10mm, Diameter Range: 95mm to 219mm, Complete Mill with the Following Components:, Coil Car, Mandrel Uncoiler, Peeler, 6 Roll Straightener, Shear End ...more
8.62" x 0.393" OTO, Tube Mill Line, 262 FPM, tooling, 2003
VX Machinery | Sylvania, OH
Category: Tube Mills
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Oto
Year: 2003
, Manufacturer: OTO, Strip Width: Min 11.02” Max 27.17”, Strip Thickness: Min.098” Max.393”, Tube Diameter Range: 3.50” – 8.62”, Maximum Production Speed: 262 FPM, Entry Equipment:, Coil Storage Rack, Coil Loading Carriage, Single Uncoiler: 33,069 lb, Coil Holding Rolls ...more
8-5/8" x .393" API Pipe Mill & Finishing Floor, 2007
Freedom Machinery Company Inc | Grand Rapids, OH
Category: Tube Mills
Seller: Freedom Machinery Company Inc
Location: Grand Rapids, OH
Year: 2007
8-5/8" x 10" mm VAI pipe mill, used
Freedom Machinery Company Inc | Grand Rapids, OH
Category: Tube Mills
Seller: Freedom Machinery Company Inc
Location: Grand Rapids, OH
12" x 8" mm OME tube mill, left to right
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Ome
Working Direction: Left to Right, The tube mill can be seen and will be in operation until end of April 2023., Layout is available under request., Foundations layout also available under request., The existing Entry Line and the existing Cutoff system + runout and pullout, units will be kept by the customer and only ...more
12.7" x .314" OME, tube forming & sizing mill, 323mm x 8mm, L to R, 35 meters/minute, new
Midwest Machinery LLC | Livonia, MI
Category: Tube Mills
Seller: Midwest Machinery LLC
Location: Livonia, MI
Make: Ome (Italy), Material: HR, CR, Galv, Condition: New, Tube Diameter: 168mm - 323mm, Wall Thickness: 2mm - 8mm, Direction: L-R, Speed: 35 meters per minute, FORMING MILL, Pass N. 1 Driven Forming # 1, Pass N. 2 Driven Forming # 2, Pass N. 3 Driven Forming # 3, Pass N. 4 Driven Forming # 4, Pass N. 5 Driven Forming ...more
JUST ADDED!
13.37" x .562" Nakata, tube mill
D & H Machinery Inc | Toledo, OH
Category: Tube Mills
Seller: D & H Machinery Inc
Location: Toledo, OH
-OD: 114.3 - 339.7mm, -Wall Thickness: 3.2 - 14.3mm, X 70-80, Max. Thickness: 10mm, -Steel Grade: H40 to N80 Oil and Gas Transmission Pipelines, -Tube Length: 6 - 12m, -Standard: API 5L, -Steel Grade: A, B, X42-80, Consisting of the following:, -Slitter, -Tube Mill Line, -2 Sets of End Facing Machines, -2 Sets of ...more
15.98" x .551" API HF tube mill, 406mm x 14mm, floor standing V-type coil car, mandrel uncoiler, 2006
Midwest Machinery LLC | Livonia, MI
Category: Tube Mills
Seller: Midwest Machinery LLC
Location: Livonia, MI
Mfr: Api
Year: 2006
Year New: 2006, Material Grade: X70 / X52, Pipe Diameter: 4.5" - 16", Wall Thickness: 4mm - 14mm, Pipe Length: 6m - 14m, Coil Width: 1350mm, Coil OD: 2200mm, Coil Weight: 25 ton, Four (4) Entry Storage Area, Floor Standing V-Type Coil Car, Mandrel Uncoiler (5.5Kw Drive), Automatic Shear & End Welder, Coil ...more
16" x 5/16" (406.4mm x 8mm) Ome, Structural Tube Mill, 810mm x 8mm strip, 27 Ton coil weight, 810mm ID, 2100mm outside dimension
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
TECHNICAL, CHARACTERISTICS OF INPUT MATERIAL, MaterialPickled and black carbon steel strips S235 - S355, Technological Characteristics, Tensile strengthmax 510 N/mm2, Yield strengthmax 355 N/mm2, Characteristics of Coil Strip, Widthmin 690, max 1300 mm, Thicknessmin 3, max 8 mm Coils, Coil Weight27 tons, Coil I.D.min ...more
16" x 8" mm Tube Mill, bolted, used
Freedom Machinery Company Inc | Grand Rapids, OH
Category: Tube Mills
Seller: Freedom Machinery Company Inc
Location: Grand Rapids, OH
20" x .563" Yoder / Mill Tech Complete API Pipe Mill Line (Upgraded 2012)
Galaxie Corporation | Wayne, MI
Category: Tube Mills
Seller: Galaxie Corporation
Location: Wayne, MI
Mfr: Yoder
Manufacturer: Yoder / Mill Tech, Pipe Grade :, API 5L (Grade up to X80), API 5CT (Grade H40, J55 and K55), ASTM, ISO, DNV (OS F101), Specific International /National Standards, Technical and Production Data: Pipe OD Range: 6 5/8" to 20" Wall Thickness Range:.157" to.563" Pipe Length : 20' to 78.5' Production Capacity: ...more
20" x 0.5" API Tube Mill Line, 140000 Ton/Yr., 223.5mm shaft, 1977
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Year: 1977
20.86" x .24" Oto Mill, tube mill components, double uncoiler, double hydraulic expandable mandrel, PLC Siemens
D & H Machinery Inc | Toledo, OH
Category: Tube Mills
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Oto
Tube Mill Components suitable for the following:, -Strip Width: Max. 530 mm, -Thickness: 2 - 6.3 mm, -Material: HR, Galvanized, Pickled, Consisting of the following:, -Double Uncoiler:, Double Hydraulic Expandable Mandrel, Hydraulic Mandrel Rotation, Hydraulic Uncoiler Rotation / Lock, Hydraulic Uncoiler Traverse for ...more
24" x .5" Torrance #TMC-450, Api Pipe Mill, 21 MPM, many recent upgrades
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Model: TMC-450
Manufacturer: Torrance USA, Model: TMC-450, Diameters: 6 5/8" -24", Thickness Range: 5/32"-1/2", Mill Speed: Up to 21mpm, Steel Grades API: X42, X52, X60, X70, Complete Tube Production Line with the Following Components:, Pit Type Coil Car, Cone Uncoiler, 25 Ton Coil Weight, Peeler Unit, Powered Hold Down Roll, 5 Roll ...more
24" x .625" Torrance / SMS ERW API linear forming cage tube mill, 25'-80' tube length
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Torrance
Manufacturer - Torrance/SMS, Type - ERW Tube Mill, Material - X42-X80, Tube Diameter -10.75" - 24", Entry Strip Width - 31" - 76.5", Wall Thickness - 0.250" - 0.625", Tube Length - 25' - 80' (based on current configuration), Entry Feed line - with Guild accumulator, Edge Treatment - Dual Head SMS Edge Milling ...more
610mm 24" ) x 14" mm Yoder/Mill Tech Rafted API Pipe Mill Line
Galaxie Corporation | Wayne, MI
Category: Tube Mills
Seller: Galaxie Corporation
Location: Wayne, MI
Mfr: Yoder
Yoder/Mill Tech API Pipe Mill Line, Rafted Stands with Spare Set of Rafts, Upgraded By Mill Tech in 2008, Pipe Diameter: 219mm - 610mm (8" - 24"), Wall Thickness: 4.5mm - 14mm, Grades: API X70, API 5L X42 to PSL, API 5L X65 to PSL, Maximum Line Speed: 20 Meters/Min, Pipe Length: 6 - 18 Meter, Complete Line with:, 40 ...more
60" x 1" SMS #SAWH, 2 step spiral pipe mill, 72" strip width, 45 ton coil weight, 2009
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Sms
Model: SAWH
Year: 2009
, MANUFACTURER - PWS (SMS), YEAR - 2009, TYPE - 2-STEP SUBMERGED-ARC WELDED HELICAL (SAWH), PIPE DIAMETER - 24" - 60" (610-1524MM), STRIP WIDTH - 39" - 72" (1000-1850MM), WALL THICKNESS RANGE - " - 1" (6-25MM), MAX COIL WEIGHT - 45 TON, PIPE LENGTH - UP TO 80', MAX GAUGE - API X-80, YIELD STRENGTH - 560 N/mm2 ...more
118" x .79" Spiral Welded Tube Factory, 35 Ton
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
SPIRAL WELDED TUBE FACTORY 3000 X 20MM X 35 TON, COIL WEIGHT AND DIMENSIONS, Max. Coil Weight- 35 ton, Material Coil Width- 2000mm, Material Coil Thickness- 7mm to 20mm, Material Coil ID Range- 508mm - 800mm, Material Max Coil OD- 2000MM, SPIRAL WELDING MACHINE CAPACITY, Diameter Range: 800mm to 3000 mm, Thickness of ...more
API Tube Facility, including spiral mill, ERW tube mill & ID/OD pipe coating
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Api
API TUBE FACILITY INCLUDING - SPIRAL MILL, ERW TUBE MILL & ID/OD PIPE COATING, FACILITY FOR SALE, INCLUDING:, 60" SMS 2-STEP SPIRAL SAHW API SPIRAL PIPE MILL, 230,000 SQUARE FOOT FACILITY, EQUIPMENT & BUILDING NEW 2009, X-80 MATERIAL CAPACITY, 24" TORRANCE/SMS ERW API TUBE MILL, 188,000 SQUARE FOOT FACILITY ...more
