Buy or Sell Your 1000 Ton Press Brake
AI-ranked results for 1000ton press brake - closest matches first
300 Ton, Minster #E2-300, 8" stroke, 72" x 48" bed, 40 SPM, Rockford controls, #5707
Alma Machinery Co-Ann Arbor MI | Ann Arbor, MI
Seller: Alma Machinery Co-Ann Arbor MI
Location: Ann Arbor, MI
Mfr: Minster
Model: E2-300
capacity 300 ton, stroke 8", max. shut ht. to bed 23.5" sdau, bed area 72" X 48" (RL X FB), speed 40 spm, ram area 72" X 48" (RL X FB) T-SLOTTED, ram adjustment 10" motorized adjustment, bolster size 8-1/2" x 72" rl x 48" fb t-slotted, window size 21" wide x 7-1/2" high, clutch rebuilt - minster air clutch and brake ...more
75 Ton, Danly #75, flywheel type OBI press, 8" stroke, 21" Shut Height, air clutch & brake, 40-80 SPM, 1975
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Danly
Model: 75
Year: 1975
MODEL #: NO 75, SERIAL #: 755976-14-76, 8" STROKE, 21" SHUT HEIGHT, 3" RAM ADJUSTMENT, 40-80 SPM, 36" x 24" BED, 24" x 18" RAM, AIR CLUTCH & BRAKE, AIR COUNTERBALANCES, PALM BUTTONS, 70" LR x 101" FB x 165" TALL, 17,000 LBS ESTIMATED WEIGHT.
220 Ton, Stamtec #G1-200, single point gap frame press, 7.88" stroke, 17.73" die hght, 4.33" adj., 20-50 SPM, air clutch & brake, #11316
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Gap Frame Single Crank Press Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Stamtec
Model: G1-200
Capacity: 220 Ton, Stroke: 7.88, Adjustment: 4.33, Die Height: 17.73, Speed: 20 - 50 SPM, Bed Area: 55 lr x 32 fb, Slide Area: 33 lr x 24 fb, Air Clutch and Brake, Air Counterbalance, Motorized Slide Adjustment, Overall height: 126, Catalog Weight: 46,000#, Capacity: 220 Ton, Stroke: 7.88, Adjustment: 4.33, Die ...more
60 Ton, Bliss #C-60, OBI Stamping Press, 6" Stroke, 3" Adjustment, 10.75" Shut H, 20" x 32" Bed, 5 HP, 1978
Yoder Brothers Machinery | Toledo, OH
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Bliss
Model: C-60
Year: 1978
SERIAL. HP44866 H57420, MODEL. C-60, STROKE. 6", ADJUSTMENT. 3", SHUT HEIGHT. 10-3/4", BED. 20" X 32", CLUTCH & BRAKE. AIR, ROSS VALVE. YES, AUTO LUBE. BIJUR, CONTROLS. LINK, MOTOR. 5 HP.
JUST ADDED!
Eemco Press, 84" x 44"
Gomaplast Machinery Inc | Wooster, OH
Category: Molding Compression Hydraulic Presses
Seller: Gomaplast Machinery Inc
Location: Wooster, OH
Mfr: Eemco
Serial # 8185 Slab sides 24” dia. up-acting ram/cylinder 16” stroke 84” x 44” top & bottom 3-zone electric platens 21” daylight between platens 150GAL/30HP/225GPM hydraulic unit electrical control panel with Allen Bradley PLC and HMI light curtains Overall press dimensions: 111″ ...more
25 Ton, Rousselle #3, OBI Press, 2" Stroke, 10.75 Shut Height, 135 SPM, 20" x 14" Bed, Air Clutch & Brake, 15" Throat, 1987
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Rousselle
Model: 3
Year: 1987
ORDER 25, 2" STROKE, 10.75" SHUT HEIGHT, 2" RAM ADJ., 135 SPM, 8.25" X 5.5" RAM, 20" X 14" BED, AIR CLUTCH, AIR BRAKE, ROCKFORD 1500 SSC CONTROL, PALM BUTTONS, 15" THROAT, 1987, 48" X 60" X 85" T APROX., 4500 LBS APROX..
140 Ton, Wysong #MTH-140-144, hydraulic press brake, 12' overall, 62" between housing, 8" stroke, 17" die space, 7" throat, 9" adj., Automec CNC 150 programmable Back Gauge, 1991
Machinery Values Inc | Harrison, NJ
Category: Hydraulic Press Brakes
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Wysong
Model: MTH-140-144
Year: 1991
140 Ton x 12' Wysong Hydraulic Press BrakeModel MTH-140-144… S/N MT5-101… New 1991 Capacity. 140 Ton x 12'Length of Bed… Ram. 144"Distance Between Housings. 120"Ram Stroke (Variable). 8"Max. Die Space. 17"Closed Height. 9"Ram speeds: Rapid Approach.″00 ...more
150 Ton, Johnson, 6" stroke, 22" Shut Height, 5" adj., 30-60 SPM, 50" x 30" bed, air clutch & brake, 1986
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Johnson
Year: 1986
Tonnage 150 tons Stroke 6 inches Ram Adjustment 5" Shut Height 22 inches Bed Size 50" x 30" Ram Size 34" x 24" SPM 30 - 60 Air Clutch (Yes/No) yes Air Brake yes Air Counterbalances yes Dual Palm Buttons yes Type (BG, Double Action, FW) backgeared Crank (Single/Double) single Weight 35000 pounds, A Cushion.
300 Ton, Bliss #S2-300, straight side double crank press, 14" stroke, 40" Shut Height, 10" ram adj., 15-30 SPM, 108" x60"bed, 25" windows, air clutch & brake, air counterbalance
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Bliss
Model: S2-300
14" STROKE, 10" POWER RAM ADJUSTMENT, 40" SHUT HEIGHT, 15-30 SPM, 108" X 60" BED, 25" WINDOWS, AIR CLUTCH, AIR BRAKE, AIR COUNTERBALANCE, CAN BE FLOOR STANDING.
500 Ton, Aida #NST-500, straight side double crank press, 12" stroke, 40" Shut Height, 4" adj., 20-50 VSPM, wet clutch, 1990
S & G Press & Machinery Sales | Shelby Township, MI
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: Aida
Model: NST-500
Year: 1990
Tonnage 500, Stroke 12 inches, Shut Height 40 inches, Adjustment 4 inches, Bed Size 120" LR x 48" FB, Ram Area 120" LR x 48" FB, SPM 20-50 VSPM, Standard, Aida Mechanical Metal Stamping Press, 500 ton Capacity (Metric), 550 Short Tons (US), 12" Stroke, 40" Shut Height, 33" Die Height, 120" LR x 48" FB Bed Area, 120" ...more
230 Ton, Cincinnati press brake
Vander Ziel Machinery Sales | Alto, MI
Category: Hydraulic Press Brakes
Seller: Vander Ziel Machinery Sales
Location: Alto, MI
Mfr: Cincinnati
Cincinnati 12′ x 230 Ton Press Brake, Asset # 17352.
200 Ton, Niagara #E250, gap frame press, 10" stroke, 21" Shut Height, 6" slide adj., 32 SPM, air clutch & brake
G-2000 | Toledo, OH
Seller: G-2000
Location: Toledo, OH
Mfr: Niagara
Model: E250
SERIAL. 52169 MODEL. E-250 CAPACITY. 250 TONS STROKE. 10" SHUT HEIGHT. 21" SLIDE ADJUSTMENT. 6" STROKES PER MINUTE. 32 SPM, SLIDE AREA. 36" LR X 28" FB BED AREA. 58" LR X 34" FB CONTROLS. INCH, SINGLE, CONTINUOUS, AIR CLUTCH AND BRAKE. YES, Machine Type.Presses, Gap Frame (OBS) Manufacturer.NIAGARA Model.E-250 ...more
JUST ADDED!
Enerpat #AMB-L, Lid Style Automatic Scrap Metal Baler, 160-315 ton press force, 2-10 TPH, Siemens motor
Enerpat | Ontario, CA
Seller: Enerpat
Location: Ontario, CA
Mfr: Enerpat
Model: AMB-L
The ENERPAT lid press scrap baler is engineered to compress bulky heavy scrap such as steel, car bodies and aluminum into tight bales. It reduces scrap volume, simplifies storage and cuts transport costs. Output runs from 1 t/h to 50 t/h. Each unit is fitted with a Siemens motor and a Hardox wear plate., Model ...more
110 Ton, Energy Mission #PBR-1030, press brake, 8' L, 6" stroke, 13" open, 7" Shut Height, 8" throat, 10 HP, Cybelec CYB-8PS Control, Back Gauge, manual crowning, 2024
Bud's Machine Tools | Murray, UT
Category: Hydraulic Press Brakes
Seller: Bud's Machine Tools
Location: Murray, UT
Mfr: Energy Mission
Model: PBR-1030
Year: 2024
Overview, Type:Press BrakesManufacturer:ENERGY MISSIONModel:PBR 1030Condition:New - In-StockYear:2024Status:For SaleCountry:United States, New 10' x 110-Ton Press brake with CybTouch 8, standard tooling, and more!, Bending Tons 110, Bending Capacity (Mild Steel) 10′, Table Size 7" x 10′, Clear ...more
1200 lb. Press Room Equipment #PR122500-NAB, single uncoiler, 14" width, 55" outside dimensions, 13.5"-21" ID, air brake w/ Control, 6 keepers
Universal Tube & Rollform | Perrysburg, OH
Category: Uncoilers and Centering Coil Reels
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Press Room Equipment
Model: PR122500-NAB
UTUBE NUMBER: 4214, MANUFACTURER: PRESS ROOM EQUIPMENT COMPANY, MODEL NUMBER: PR122500-NAB, SERIAL NUMBER: 0687-029, Maximum Coil Weight: 1,200 Lbs., Maximum Coil Width: 14″, Coil I.D. Range: 13-1/2″ 21″, Maximum Coil O.D.: 55″, Air Brake w/Control, (6) Coil Keepers, Dancer Arm Shaft, OVERALL ...more
71 Ton, Minster #P2H-63-39, straight side double crank press, 1.9" stroke, 2.95"adj., 39.4"x24.8"bed, 400 SPM, Minster clutch & brake
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Minster
Model: P2H-63-39
Capacity: 71 Ton Bed Size: 39.4” l-r x 24.8” f-b Stroke: 1.97” Adjustment: 2.95” Speed: 400 SPM Windows: 14” wide x 17” high : Livonia Magnetic Scrap Conveyor Minster Clutch and Brake Control.
300 Ton, Bliss #S2-300-72-42, straight side double crank press, 10" stroke, 24" Shut Height, 6" ram adj., 25-50 SPM, 72" x42"bed, 25.5"windows, air clutch & brake
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Bliss
Model: S2-300-72-42
10" STROKE, 24" SHUT HEIGHT, 6" RAM ADJUSTMENT, 25-50 SPM, 72" X 42" BED, 72" X 42" RAM, 25.5" WINDOWS, AIR CLUTCH, AIR BRAKE, AIR COUNTERBALANCE, FLOOR STANDING.
Amada Press Brake Clamps, LOT of 7 or individual
Wheeler Machinery Sales | Pomona, CA
Category: Press Accessories and Parts
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Model: AMADA PRESS BRAKE CLAMPS
AMADA Clamps.
60 Ton, Minster #6, flywheel OBI press, 6" stroke, 11" Shut Height, 2.75" adj., 90 SPM, 32" x 21" bed, air clutch & brake, 1975, #11544
Universal Press & Machinery (UPM) | Ferndale, MI
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Minster
Model: -6
Year: 1975
(1) Used 60 Ton Minster #6 Flywheel OBI Press, Capacity: 60 Ton, Stroke: 6, Adjustment: 2.75, Shut Height: 11 (SDAU over bed), Speed: 90 SPM, Bed Area: 32 lr x 21 fb, Air Clutch and Brake, Air Counter Balance, Dual Palm Buttons, Inch / Single / Continuous Modes, Flywheel Design, Capacity: 60 Ton, Stroke: 6 ...more
2750 Ton, Cincinnati #25-10-12, hydroform press, 16" stroke, 29.75" DL, 1963
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Hydraulic Hydroforming Press Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Cincinnati
Model: 25-10-12
Year: 1963
(1) Used 2750 Ton Cincinnati Hydroform Press, Max Tonnage: 2750, Max Stroke: 16, Rapid Advance: 1000 IPM, Rapid Return: 1000 IPM, Max Stripping Capacity: 35 Tons, Daylight: 29.75 (Stroke Up Tool Nest Removed), Max Pressing Speed: 55 IPM (0 - 1100 tons), Max Pressing Speed: 21 IPM (1100 - 2750 tons), 130 GPM, Max Blank ...more
720 HP Caterpillar #3412E, Engine Assembly
Diesel Sales | Chicago, IL
Category: Diesel Marine Engines
Seller: Diesel Sales
Location: Chicago, IL
Mfr: Caterpillar
Model: 3412E
Marine 720 Hp, Good With 100 Day Limited Parts Warranty, 27,000 Hours Since New, Original. Keel Cooled, With Panel 183-3882 Engine Ar. 474/459/448 Brake Kw (635/615/600 Bhp) At 1800 Rpm. Keel Cooled. Port, Rh Service. Starting At $49,995.00.
250 Ton, Niagara #E-250, OBI press, 12" stroke, 22" Shut Height, air clutch & brake, 27 SPM
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Niagara
Model: E-250
MODEL #: E-250, SERIAL #: 51238, 12" STROKE, 22" SHUT HEIGHT, 6" POWERED RAM ADJUSTMENT, 27 SPM, 58" x 34" BED, 36" x 28" RAM, AIR CLUTCH & AIR BRAKE, AIR COUNTERBALANCE, PALM BUTTONS, T SLOTTED RAM AND BOLSTER, 480 V, 3 PH, GOOD CONDITION.
480 Ton, Baykal #APHS-4116X440, hydraulic press brake, 13' 4"OA, 139" between housing, 12.6"stroke, 19.7"throat, 23.2"DL, Delem DA-69W, 2011
D & D Industries Inc | Monclova, OH
Category: Hydraulic Press Brakes
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Baykal
Model: APHS-4116X440
Year: 2011
MODEL: APHS 4116×440 CAPACITY: 13′ 5” X 480 TON SERIAL NO.: 17729 OVERALL BENDING LENGTH: 13’ 4” DISTANCE BETWEEN HOUSINGS: 11’ 7” STROKE OF RAM: 12.6” OPEN DAYLIGHT: 23.2” SPEED: ADVANCE: 189 IPM SPEED: PRESSING: 23 IPM SPEED: RETURN: 165 IPM MAXIMUM TRAVEL OF ...more
Cam-Wood #PT-510S3HF, single table high frequenc, 5' width x 10' L capacity, 7.5 HP pump, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Presses and Cold Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: PT-510S3HF
Year: 2026
CAM-WOOD PT-510S3HF Single Table High Frequency, 3-Sided Board PressSlanted type High Frequency Press with a 5' X 10' capacitys: -- Mass production for wooden boards, 2 to 3 minutes for drying a 4' x 8' or 5' x 10' wooden board -- Shortens manufacturing procedures – no need to pass ...more
75 Ton, Danly #75, OBI press, 8" stroke, 21" Shut Height, air clutch & brake, 68 SPM, 1975
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Danly
Model: 75
Year: 1975
MODEL #: 75, SERIAL #: 7559130674, 8" STROKE, 21" SHUT HEIGHT, 3" RAM ADJUSTMENT, 68 SPM, 36" x 24" BED, 24" x 18" RAM, AIR CLUTCH & BRAKE, PALM BUTTONS, AIR COUNTERBALANCES, YEAR: 1975, 70" LR x 101" FB x 158" TALL, 17,000 lbs ESTIMATED WEIGHT.
100 Ton, Minster Piecemaker #P2-100-48, high speed press, 5" stroke, 22" Shut Height, 50-100 SPM, 48" x 31" bed, air clutch & brake
Rygate, LLC | Clarkston, MI
Category: High Speed and Automatic Presses
Seller: Rygate, LLC
Location: Clarkston, MI
Mfr: Minster
Model: P2-100-48
MINSTER P2-100-48 PIECEMAKER, Tonnage. 100 T, Stroke. 5", Shut Height. 22", Bed area (Left to right). 48", Bed area (Front to back). 31", SPM min. 50 strokes/min., SPM max. 100 strokes/min., Adjustment. 4", Air Clutch and Brake Assembly, Motors and Controls, Palm Buttons, Air Counterbalance, Minster Monitor Flow Lube ...more
440 Ton, U.S. Industrial #USHB, CNC hydraulic press brake, 4' -13' overall, new, #14304-14320 (18 available)
Blumberg Machinery Co | Bannockburn, IL
Category: CNC Press Brakes
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: U.S. Industrial
Model: USHB
NEW 22 TON x 4" US INDUSTRIAL MODEL USHB22-4S CNC HYDRAULIC PRESS BRAKEBASE PRICE: PORSTANDARD EQUIPMENT2-Axis "Simple CNC" For Backgauge & Ram Programming Power Front Operated Back Gauge, Motorized With Fine Adjustment Hand WheelPower Ram Depth Control, Motorized With Fine Adjustment Hand WheelDigital Displays ...more
150 Ton, Bliss, OBI press, 8" stroke, 22" Shut Height, 4.5"adj., 40-80 SPM, 50" x30"bed, air clutch & brake, 1986
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Bliss
Year: 1986
8" STROKE, 4.5" ADJUSTMENT, 22" SHUTHEIGHT, 40-80 SPM, 34" X 24" RAM, 50" X 30" BED, AIR CLUTCH, AIR BRAKE, AIR COUNTERBALANCE, PALM BUTTONS, LIGHT CURTIANS, 1986, 108" X 97" X 176" T APROX., 35000 APROX..
220 Ton, SafanDarley, electric press brake, 13' 5" OA, 160" between housing, 11.8" stroke, 16.31" DL, SafanDarley EC20 Control, 39.4" BG, 2 front support arms, 2013
Westway Machinery Ltd | Mississauga, ON
Category: CNC Press Brakes
Seller: Westway Machinery Ltd
Location: Mississauga, ON
Mfr: Safandarley
Year: 2013
S:, SafanDarley EC20 Control, Windows BasedEight CNC Axis Y1, Y2, X1, X2, R1, R2, Z1, Z2Wila NS Hydraulic Upper & Lower Clamping / Crowning Premium.Physical Rear Guarding2 Front Support Arms on Lateral Guides c/w Hand Crank AdjustmentIntegrated Safety Light Curtains, with Single and Double Beam Break, MODEL: ...more
75 Ton, Minster #P2-75, straight side double crank press, 3" stroke, 4" slide adjustment, 17" Shut Height, air clutch & brake, lubrication system, #13886J
Timco Inc | Columbia, TN
Seller: Timco Inc
Location: Columbia, TN
Mfr: Minster
Model: P2-75
Minster 75 Ton SSDC Press, STOCK# 13886J, Mdl# P2-75, S/N# 16854, Capacity: 75 Ton, Stroke: 3", Slide Adjustment: 4", Shut Height: 17" Over Bed, Bed Area: 36"L-R x 31" F-B, Speeds: 80/120 SPM (Variable), Windows: Yes, Air Clutch & Brake, Flywheel Design, 3" Bolster Plate, Control Station, Air Counterbalances ...more
100 Ton, Minster #P2-100, straight side double crank press, 1.5" stroke, 18" Shut Height, air clutch & brake, 150-300 SPM
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Minster
Model: P2-100
MODEL #: P2-100, SERIAL #: P2-100-19263, 1.5" STROKE, 18" SHUT HEIGHT, 2.5" RAM ADJUSTMENT, DOUBLE LOCK UPS ON RAM, 150-300 SPM, 42" x 31" BED, 42" x 18.5" RAM, AIR CLUTCH & BRAKE, 16" WINDOWS, APPROXIMATE DIMENSIONS: 100" LR x 65" FB x 11' TALL, 27500 LBS APPROXIMATE WEIGHT, GOOD CONDITION.
60 Ton, Danly, OBI press, 3.5" stroke, 13-1/2" Shut Height, air clutch & brake, 100 SPM
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Danly
SERIAL #: 6057380172, 3.5" STROKE, 3" RAM ADJUSTMENT, 13-1/2" SHUT HEIGHT, 32" x 22" BED, 15-1/2" x 12" RAM, 2" THICK T-SLOTTED BOLSTER, AIR CLUTCH & BRAKE, 100 SPM, PALM BUTTONS, 55" LR x 76" FB x 112" TALL APPROXIMATE DIMENSIONS, 9500 LBS APPROXIMATE WEIGHT, GOOD CONDITION.
800 Ton, Bliss #26-KJ800, knuckle joint press, 2.5" stroke, 20" Shut Height,.5" adj., 23" x32" bed, 33 SPM, air clutch & brake
Yoder Brothers Machinery | Toledo, OH
Category: Knuckle Joint Press Machines
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Bliss
Model: 26-KJ800
SERIAL. T-33280, MODEL. #26 - KJ800 CAPACITY. 800 TON, STROKE. 2.5", RAM ADJUSTMENT.5", POWERED, SHUT HEIGHT. 20" BED AREA. 23" x 32" SLIDE AREA. 20.5" x 19" STROKES PER MINUTE. 33 SPM, RUN MODES. SINGLE, CONTINUOUS AIR CLUTCH & BRAKE. YES AUTO LUBRICATION. YES, E-STOP BUTTON. YES, LOADGARD MONITOR. YES MOTOR. 15 ...more
300 Ton, Betenbender #12-300T, Hydraulic Press Brake, 12' overall, 6" bed, 126.5" between housing, 6" stroke, 16" open, 10" Shut Height, 24" front operated back gauge, tooling
Norman Machine Tool Ltd | Baltimore, MD
Category: Hydraulic Press Brakes
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Betenbender
Model: 12-300T
Betenbender 12′ x 300 Tons Hydraulic Press Brake, 12-300T, Inventory # 10051-P, Model: 12-300T, S/N: 89902 “2002”, Max. Tonnage: 300 Tons, Bed Length: 144 1/2″, Bed Width: 6″, Distance Between Housings: 126 1/2″, Stroke: 6″, Open Height: 16″, Closed Height: 10″ ...more
90 Ton, Cincinnati #90AF-6, Autoform Hydraulic Brake, 8' Bed & Ram length, 6.5' Between Housings, 14" Ram Stroke, 7" Throat depth, 15 HP, 1991
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Press Brakes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cincinnati
Model: 90AF-6
Year: 1991
SERIAL. 47363MODEL. 90AF-6YEAR NEW. 1991CAPACITY. 90 TONOVERALL LENGTH OF BED & RAM. 8'DISTANCE BETWEEN HOUSINGS. 6'6"STROKE OF RAM. 14"OPEN HEIGHT. 21"CLOSED HEIGHT. 7"DEPTH OF THROAT. 7"RAM SPEED RAPID APPROACH. 380 IPMRAM SPEED PRESSING. 1 TO 120 IPMRAM SPEED NORMAL RETURN. 11 TO 405 IPMBACK GAUGE CNC. ...more
400 Ton, Niagara #BP2-400, straight side double crank press, 5" stroke, 23" Shut Height, 6" adjustment, 20-50 SPM, air clutch & brake, 1976, #13845J
Timco Inc | Columbia, TN
Seller: Timco Inc
Location: Columbia, TN
Mfr: Niagara
Model: BP2-400
Year: 1976
NIAGARA 400 TON SSDC PRESS, STOCK# 13845J, Stk# 1533a, S/N: 49184, Year: 1976, Model: BP2-400, Stroke: 5", Shut Height: 23", Adjustment: 6", Bed Size: 54" x 42", SPM: 20-50, Equipped w/, Air Clutch & Brake, Air Counterbalances, T-Slotted Ram & Bolster, Windows, Vibration Pads, Wintriss Smart Pac.
LaBounty #MSD, mobile hydraulic shear, 33" shear opening, 37" throat to tip, 13' 6" reach
Alan Ross Machinery Corp | Zion, IL
Category: Mobile Shears
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Labounty
Model: MSD
Year: 2008
**, Shear Opening: 33", Throat to Tip: 37", Reach: 13'6", Shear Force @ Throat: 1,000 Ton, Shear Force @ Main Blade Center: 422 Ton, Shear Force @ Tip: 164 Ton.
6 Ton, Cadmach / CMC Machinery LLC US #CPD-IV-55, 2 sided, 55 station rotary tablet press, 1320-6600 tablets/minute
Frain Industries | Carol Stream, IL
Category: Tablet Press Machine
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Cadmach
Model: CPD-IV-55
Cadmach, Model CPD IV-55, 2 sided, 55 station rotary tablet press, rated from 1,320 to 6,600 tablets per minute – depending on materials, application, machine configeration and enivorment being run in. Compression: up to 6 tons. Maximum tablet diameter of 16mm; Maximum fill depth of 17mm. "B" tooling ...more
12 Ton, Tishken #21562150, tilt frame, 2 stroke, 6.5" Shut Height, .5" adj., air clutch & brake
D & D Industries Inc | Monclova, OH
Category: Cut-off Presses
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Tishken
Model: 21562150
MODEL #: 90T-5A, SERIAL #: 6098-115L-11209-664, 2" STROKE, 7" SHUT HEIGHT, 2" RAM ADJUSTMENT, 12" x 11" BED, 11" x 10" RAM, AIR CLUTCH & BRAKE, TILT FRAME, 42" LR x 30" FB x 88" TALL, 2500 LBS ESTIMATED WEIGHT, GOOD CONDITION.
25 Ton, Niagara #M-22-S, gap frame press, 4" stroke, 7.5" Shut Height, 2" ram adj., air clutch & brake, palm buttons, 150 SPM, 1989, #13878J
Timco Inc | Columbia, TN
Category: Gap Frame Single Crank Press Machines
Seller: Timco Inc
Location: Columbia, TN
Mfr: Niagara
Model: M-22-S
Year: 1989
NIAGARA 25 TON GAP FRAME PRESS, STOCK# 13878J, MDL# M-22-S, S/N# P53300, STROKE 4", SHUT HEIGHT 7.5", RAM ADJ 2", BED SIZE 20"LR X 12" FB, SLIDE ARE 12"LR X 10"FB, SPEED 150 SPM, EQ WITH:, AIR CLUTCH/BRAKE, PALM BUTTONS.
220 Ton, Aida #NC1-200(2), gap frame press, 9.84" stroke, 19.68" Shut Height, 4.33" adj., 57.7" x33" bed, 25-45 SPM, air clutch & brake
Yoder Brothers Machinery | Toledo, OH
Category: Gap Frame Single Crank Press Machines
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Aida
Model: NC1-200
SERIAL. 10420-0078 MODEL. NC1-200(2) CAPACITY. 220 TON STROKE OF SLIDE. 9.84" SLIDE ADJUSTMENT. 4.33", POWER SLIDE ADJUSTMENT. YES SHUT HEIGHT, OVER BOLSTER. 19.68" AREA OF BED. 57.7" X 33.0" AREA OF RAM. 34.6" X 25.5", STROKES PER MINUTE. 25-45 SPM AIR CLUTCH. YES AIR BRAKE. YES AIR COUNTER BALANCES. YES, HYDRAULIC ...more
325 Ton, Standard #AB-325-16, CNC Press Brake, 192" Bending, 173" Between Housing, 8" Stroke, 16" Open H, 0' Throat, 220/440 V., 3PH, 1994
Revelation Machinery | Chicago, IL
Category: CNC Press Brakes
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Standard
Model: AB-325-16
Year: 1994
Make: Standard, Model: AB-325-16, Year: 1994, Machine Location: Kansas, Tonnage: 325 Ton, Bending Length: 192″, Dist. Between Housings: 173″, Throat Depth: 10”, Open Height: 16″, Stroke Length: 8”, Closed Height: 8″, Fast Approach Speed: 112 IPM, Fast Return Speed: 18 IPM, Press ...more
4000 lb. Press Room Equipment #P120F12-SEI, servo feed line, 12" width x .092", right to left, straighteners, uncoiler, air brake, 2002#13875J
Timco Inc | Columbia, TN
Category: Coil Feed Lines
Seller: Timco Inc
Location: Columbia, TN
Mfr: Press Room Equipment
Model: P120F12-SEI
Year: 2002
PRE 12" X.092" X 4,000 LBS SERVO FEED LINE, STOCK# 13875J, SERVO FEEDER, SERIAL #: 0402-014, NEW 2002, MODEL #: PI20F12-SE1, 12" WIDTH,.092" x 12" CAPACITY, RIGHT TO LEFT FEED DIRECTION, STRAIGHTENER, 7 ROLLS, 2 PINCH, 4 COIL BREAKER ROLLS, 12" WIDE,.092 CAPACITY AT FULL WIDTH, 100 FPM SPEED, 4,000 LB UNCOILER, SERIAL ...more
400 Ton, Niagara #BP1-400-36-42, 6" stroke, 23" Shut Height, 36" RL x 42" FB bed, 40 SPM,air clutch & br., 1981
Alma Machinery Co-Columbia TN | Columbia, TN
Seller: Alma Machinery Co-Columbia TN
Location: Columbia, TN
Mfr: Niagara
Model: BP1-400-36-42
Year: 1981
Straight Side Press • Used 400 Ton Press for Sale Manufacturer: Niagara Model: Niagara BP1-400-36-42 Press Condition: Very Good Location: Columbia, TN Warehouse Year: 1981 Machine #: 8032 CAPACITY 400 TON STROKE 6″ MAX SHUT HEIGHT TO BED 23″ SDAU BED AREA 36″ X 42″ (RL X FB) SPEED 40 SPM ...more
45 Ton, Bliss #C-45, flywheel type OBI press, 3" stroke, 12.25" Shut Height, 3" adj., 90 SPM, 29.5"x18"bed, air clutch & brake
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Bliss
Model: C-45
MODEL #: C-45, SERIAL #: 62933, 3" STROKE, 12-1/4" SHUT HEIGHT, 3" RAM ADJUSTMENT, 90 SPM, 29.5" x 18" BED, 14" x 9" RAM, AIR CLUTCH & BRAKE, PALM BUTTONS, 5 HP 230/460, 60" LR x 74" FB x 107" TALL, 8500 LBS ESTIMATED WEIGHT, GOOD CONDITION.
60 Ton, Tishken #CO-24-24-60, 4-post cut-off press, 2 -1/2" stroke, air clutch & brake, 1998, #73911
Yoder Machinery Sales | Holland, OH
Category: Cut-off Presses
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Tishken
Model: CO-24-24-60
Year: 1998
SERIAL. 21942298, MODEL. CO-24-24-60, YEAR NEW. 1998, CAPACITY. 60 TON, STROKE. 2-1/2", DISTANCE BETWEEN POST HOUSING. 30-1/4", DISTANCE BETWEEN POST. 32" X 21", SHUT HEIGHT. 9 TO 10", MAXIMUM WIDTH OF CUT. 18", FLOOR TO DIE ADJ. 32" TP 37", 3 AXIS ADJUSTABLE BASE. YES, AUTOMATIC LUBE. BIJUIR, AIR CLUTCH. YES, AIR ...more
28 Ton, Perkins, OBI press, 2" stroke, 10" Shut Height, air clutch
Hariton Machinery Co Inc | Bridgeport, CT
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Perkins
Press Capacity 28T Stroke 2" Shut Height 10", Air Clutch, AC Motor and Controls.
1250 Ton, Verson, 144" x 72", 54" stroke, 74" daylight, 3 cushions
General Machinery LLC | Detroit, MI
Category: Hydraulic Presses
Seller: General Machinery LLC
Location: Detroit, MI
Mfr: Verson
Verson Hydraulic Press, Model: 1250-HD3-72-144-4T, Bed & Slide Area: 144" x 72", Stroke: 54", Daylight: 74" Over Bolster, Capacity @ 2750 PSI: 1250 Tons, Capacity @ 3000 PSI: 1365 Tons, Pre Pressing @ 2750 PSI: 605 Tons, Pre Pressing @ 3000 PSI: 655 Tons, Fast Advance: 580 IPM, Pressing Speed: 55 IPM, Pre pressing ...more
165 Ton, Aida #NC1-15(1), gap frame press, 5.11" stroke, 13.77" Shut Height, 3.93" ram adj., 40-85 SPM, 46" x23.62" bed, air clutch & brake, 1986
D & D Industries Inc | Monclova, OH
Category: Gap Frame Single Crank Press Machines
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Aida
Model: NC1-15
Year: 1986
5.11" Stroke, 3.93" Ram Adjustment, 13.77" Shut Height Over Bolster, 40 - 85 SPM, 27.55" x 22.83" Ram, 46" x 23.62" Bed, Air Clutch, Air Brake, Air Counterbalances, Hydraulic Overloads, Palm Buttons, 60" LR x 83" FB x 131" Tall, Estimated Weight 35000.
JUST ADDED!
80 Ton, Aida #NC1-80(1), Single Crank Gap Frame Press, 3.9" stroke, 3" adj., 10 HP, 55-110 SPM
Aucto | San Francisco, CA
Category: Gap Frame Single Crank Press Machines
Seller: Aucto
Location: Louisville, KY
Mfr: Aida
Model: NC1-80
THIS AIDA NC1-80(1) SINGLE-CRANK GAP-FRAME PRESS OFFERS A NOMINAL TONNAGE CAPACITY OF 80 TONS (88 SHORT TONS). IT S A STROKE LENGTH OF 3.93 INCHES AND A SLIDE ADJUSTMENT OF 3.14 INCHES. THE PRESS IS POWERED BY A 10 HORSEPOWER MOTOR AND OPERATES AT A VARIABLE SPEED RANGE OF 55 TO 110 STROKES PER MINUTE (SPM). THE ...more
75 Ton, Minster #OBS-7, gap frame press, 5" stroke, 20.5"Shut Height,air clutch & brake, 60 SPM, 1998
D & D Industries Inc | Monclova, OH
Category: Gap Frame Single Crank Press Machines
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Minster
Model: OBS-7
Year: 1998
MODEL: OBS 7, SERIAL #: 29670, 5" STROKE, 3.5" RAM ADJUSTMENT, 20.5" SHUT HEIGHT, 36" x 24" BED, 60 S.P.M., 26" x 16" RAM, BACK GEARED, AIR CLUTCH, AIR BRAKE, AIR COUNTERBALANCES, PALM BUTTONS, RECIRCULATING LUBE, 7.5 HP 230/460, 1800 R.P.M., YEAR: 1998, APPROXIMATE WEIGHT: 22000 LBS, GOOD CONDITION.
100 Ton, Goiti #CFR, single point gap frame press, 5.5" stroke,air clutch & brake, 1984, #10406
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Gap Frame Single Crank Press Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Goiti
Model: CFR
Year: 1984
(1) Used 100 Ton Goiti Single Point Gap Frame Press, Serial Number: 84-429-51, Capacity: 100 Ton, Stroke: 5.5, Die Height: 11.2, Slide Adjustment: 3.54, Bed Area: 38LR x 24.5FB, Slide Area: 24LR x 18FB, Wintriss #WPC-1000 Clutch & Brake Control, Omron Safety Light Curtains, T Slotted Bolster, T-Slotted Ram ...more
55 Ton, Niagara, press brake, 6' overall
Sabito Machinery Inc | Concord, ON
Category: Hydraulic Press Brakes
Seller: Sabito Machinery Inc
Location: Concord, ON
Mfr: Niagara
230 Ton, Cincinnati, press brake, 12' overall
Vander Ziel Machinery Sales | Alto, MI
Category: Hydraulic Press Brakes
Seller: Vander Ziel Machinery Sales
Location: Alto, MI
Mfr: Cincinnati
Cincinnati 12′ x 230 Ton Press Brake, Model 230FMx10, Asset # 17381, Serial #.
Durma #E3090, press brake
Mid Atlantic Machinery | Harrisburg, PA
Category: Hydraulic Press Brakes
Seller: Mid Atlantic Machinery
Location: Harrisburg, PA
Mfr: Durma
Model: E3090
10 Ton, Ardcor #K10-2-9, 2-post cut off press, 2 stroke, 4"-6" Shut Height, air clutch & brake, #17962
Yoder Machinery Sales | Holland, OH
Category: Cut-off Presses
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Ardcor
Model: K10-2-9
SERIAL. 72 313, MODEL. K10-2-9, CAPACITY. 10 TON, STROKE. 2", SHUT HEIGHT. 4" TO 6", SPEED. 60 SPM, LENGTH OF LOWER DIE RAIL. 20-1/2", LENGTH OF UPPER DIE RAIL. 18", CLEARANCE BETWEEN POSTS. 9", FLOOR TO BOTTOM RAIL. 36-3/4" TO 38-3/4", AIR CLUTCH AND BRAKE. YES, MOTOR. 2 HORSEPOWER.
JUST ADDED!
50 Ton, Betenbender, Hydraulic Press Brake, 6' overall, 8" throat, 12" open, 6" Shut Height, 54.5" between housing, 10 HP
Norman Machine Tool Ltd | Baltimore, MD
Category: Hydraulic Press Brakes
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Betenbender
Betenbender 6′ x 50 Ton Hydraulic Press Brake, Inventory # 10069, Model: 6′ x 50 Ton, S/N: 43293, Made in USA, Width of Bed: 2″, Width of Upper Machined Ram: 1 3/4″, Throat Depth: 8″, Open Height: 12″, Closed Height: 6″, Height of Bed: 28″, Distance Between Housings: 54 ...more
480 Ton, Baykal #APHS-4116x440, hydraulic press brake, 13' 5"OA, 140" between housing, 12.6"stroke, 19.7"throat, 23.2"DL, 2011
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Hydraulic Press Brakes
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Baykal
Model: APHS-4116X440
Year: 2011
2011 Baykal APHS 4116 x 440 Hydraulic Press Brake, 480 Ton, 13'5" Bed Length. s 140" between housings, 12.6" stroke, and 23.2" daylight opening. a 40 HP motor, overall dimensions 200"x90"x138". Weight approx. 60,000 lbs., MODEL: APHS 4116×440, CAPACITY: 13 5 X 480 TON, SERIAL NO.: 17729, OVERALL BENDING ...more
32 Ton, Minster #4, OBI Press, 3" Stroke, 12" Shut Height, 24" x 16" Bed, Air Clutch & Brake
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Minster
Model: 4
ORDER 32, 3" STROKE, 2.25" RAM ADJ, 12" SHUT HEIGHT, 175 SPM, 21" X 14" RAM, 24" X 16" BED, AIR CLUTCH, AIR BRAKE, PALM BUTTONS, WINTRESS CONTROLS WPC, 46" X 60" X 120" T APROX., 7500 LBS APROX..
140 Ton, Wysong #PHP1040-96, CNC hydraulic press brake, 8' overall, 78" between housing, 14" stroke, 1995
D & D Industries Inc | Monclova, OH
Category: CNC Press Brakes
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Wysong
Model: PHP1040-96
Year: 1995
MODEL #: PHP1040-96, SERIAL #: HPB53-102X, 8' BED, 6' 6" BETWEEN HOUSINGS, 14" STROKE, 9" ADJUSTMENT, 23" MAXIMUM OPEN HEIGHT, BEND WIZARD PC - 800 CNC BACK GAUGE (NEW 2012), 7 AXIS, 60" MAXIMUM BACK GAUGE TRAVEL, 49 GALLON RESERVOIR, 32" FLOOR TO BED, SPEEDS:, 300 IPM ADVANCE, 20 IPM PRESSING, 210 IPM RETURN, FLOOR ...more
200 Ton, Mori Iron Works #MSF200-M32, multi-axis servo hydraulic cold forming press, 2016
Perfection Global | Elk Grove Village, IL
Category: Forming Presses
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Mori Iron Works
Model: MSF200-M32
Year: 2016
Main Slide Tonnage Capacity: 200 TonBolster Area (L-R x F-B) 20.1" x 28.7"Slide Area (L-R x F-B) 21.7" x 18.9"Daylight: 47.2"Opening in Upright: 20"Stroke Length: 21.7"Unloaded Stroke Speeds (Up / Down): 472 IPM / 472 IPMPressing Speeds (20-100 Tons) 82 IPMPressing Speeds (100-200 Tons) 35 IPMLifting Power: 30 ...more
45 Ton, Minster #5-Fixed-Base, gap frame single crank press, 3" stroke, 15.75"Shut Height, 2.5"ram adj., 90 SPM, 28" x16"bed, air clutch & brake, 1992
D & D Industries Inc | Monclova, OH
Category: Gap Frame Single Crank Press Machines
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Minster
Model: 5-FIXED-BASE
Year: 1992
3" STROKE, 2.5" RAM ADUSTMENT, 15.75" SHUT HEIGHT, 90 SPM, 28" X 16" BED, 24" X 14" RAM, 1992, AIR CLUTCH, AIR BRAKE, PALM BUTTONS, 2.25" BOLSTER THICKNESS, 7.5 HP 230/460, 44" X 64" X 118"T APPROX., 10,000 LBS APPROX..
90 Ton, Cincinnati #FM Tandem hydraulic press brake, 28' overall, 10' 6-3/4" between housing, Hurco AutoBend 7, 17.5 HP
Aleco Machinery Sales | Milwaukee, WI
Category: CNC Press Brakes
Seller: Aleco Machinery Sales
Location: Milwaukee, WI
Mfr: Cincinnati
Model: FM
Pre Owned 90 Ton X 28’ Cincinnati FM Tandem Hydraulic Press Brakes, Capacity 90 TONS, Overall Length of Bed & Ram 28’, Distance Between Housings ` 10’6 3/4” Each Brake, Stroke 8”, Open Height 15”, Closed Height 7”, Throat Clearance 20”, Speeds, Approach 312 INCH PER ...more
75 Ton, Bliss #C-75, OBI press, 4" stroke, 15" Shut Height, 3.5"adj., 100 SPM, 36" x24"bed, air clutch & brake, 1979
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Bliss
Model: C-75
Year: 1979
MODEL #: C-75, SERIAL #: H-68906, 4" STROKE, 3.5" RAM ADJUSTMENT, 15" SHUT HEIGHT, 100 SPM, 24" x 19" RAM, 36" x 24" BED, AIR CLUTCH, AIR BRAKE, AIR COUNTERBALANCES, PALM BUTTONS, 1979, GOOD CONDITION 78" LR x 94" FB x 127" TALL APPROXIMATE WEIGHT 17,500 LBS.
350 Ton, Minster, OBS gap press, 9.84" stroke, 18.11" throat, wet clutch & brake, 2014, #14288J
Timco Inc | Columbia, TN
Category: Gap Frame Single Crank Press Machines
Seller: Timco Inc
Location: Columbia, TN
Mfr: Minster
Year: 2014
MINSTER 350 TON OBS GAP PRESS, STOCK# 14288J, New 2014, 9.84" STROKE, 4.72" RAM ADJUSTMENT, 17.7" SHUT HEIGHT ABOVE BOLSTER, 20-40 SPM, 47.24" X 27.56 RAM, 63" X 35.43" BED, AIR CLUTCH, AIR BRAKE, AIR COUNTERBALANCE, PALM BUTTONS, HYDRAULIC OVERLOAD, 2014, 30 HP 230/460/60/3, 84" X 112" X 117"T APROX., 71650 LBS ...more
Baird #104, Multi-slide Wire Machinery, 1/32" wire diameter, 7/8" stock, 4 1/4" feed, 550 SPM, Air Clutch/Brake, Split cams, Cutoff
National Machinery Exchange | Newark, NJ
Category: Wire Formers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Baird
Model: 104
Maximum Thickness of Stock: 1/32" Maximum, Width of Stock: 7/8", Maximum Length of Feed: 4 1/4", Die Head Tonnage 3, Production: 110 - 550 SPM, Motor: 1 1/2 HP Vari Speed 3/60/230/460, Overall Size: 68" x 40" x 48 3/4", Weight: 1900 Lbs., Air Clutch/Brake, Split Cams, 4 Extra Cams, Cutoff, Stock Check, 1 SD Press, 1 ...more
110 Ton, Energy Mission Splendid series #PBR-1030, cnc press brake, 7" x 10' table, 6" stroke, 13" open, 7" Shut Height, 8" throat, 10 HP, Cybelec Cyb Touch 8PS Control, laser curtain, new, 2025
Bud's Machine Tools | Murray, UT
Category: CNC Press Brakes
Seller: Bud's Machine Tools
Location: Murray, UT
Model: PBR-1030
Year: 2025
Overview, Type:Press BrakesManufacturer:ENERGY MISSIONModel:PBR 1030Condition:New - In-StockYear:2025Stock #:1913Status:For SaleCountry:United States, Bending Tons 110, Bending Capacity (Mild Steel) 10′, Table Size 7" x 10′, Clear Pass. 100", Ram Strokes 6", Open Height 13", Closed ...more
250 Ton, Beckwood #4P250F2828, 4-POST, heated platen press, 12" stroke, 12" DL, 28" x 28" heated platens, 2023
Kempler Machinery | Elk Grove Village, IL
Category: Laminating Presses
Seller: Kempler Machinery
Location: Elk Grove Village, IL
Mfr: Beckwood
Model: 4P250F2828
Year: 2023
250 Ton Beckwood Model 4P250F2828, 28" x 28" Heated Platens, 12" str., 12" DL, New 2023, MAX TONNAGE: 250 TONS, HEATED PLATENS: 28" x 28", MAX. Temperature: 450 degrees, STROKE: 12", DAYLIGHT: 12", PRESSING SPEED: 1-28 INCH/MIN, RETRACTION SPEED: 1-37 INCH/MIN, POSITION CONTROLLED PRESS, HEATED PLATENS, 50HP MOTOR ...more
Asahi Seiki #TP-25, transfer press, 2" stroke, 11 op die set, single row feed, Ori air cooled & brake, 1983
Global Machine Brokers LLC | Guilford, CT
Category: Eyelet Transfer Press Machines
Seller: Global Machine Brokers LLC
Location: Guilford, CT
Mfr: Asahi Seiki
Model: TP-25
Year: 1983
Asahi Seiki Model TP-25 new name, previous MTP 3-25, Make: Asahi Seiki, Model: TP-25, Serial No: 50212, Year New: 1983, Condition: Used, Overall In Great Shape, Fully Operational, 11 operation die set – Fuji, Ori Air Clutch / Brake Combo, Bijur Oil system for sliding surfaces, Includes Die Set, transfer cam ...more
22 Ton, Niagara #M22, OBI press, 2" stroke, 8.75" Shut Height, 2" adj., 100-300 SPM, 20" x12.5"bed, air clutch & brake, foot pedal
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Niagara
Model: M22
MODEL #: M22, SERIAL #: 45315, 2" STROKE, 2" RAM ADJUSTMENT, 8-3/4" SHUT HEIGHT, 100 - 300 SPM, 20" x 12-1/2" BED, 8-7/8" x 10-1/4" RAM, AIR CLUTCH & BRAKE, PALM BUTTONS, LIGHT CURTAINS, FOOT PEDAL, 52" LR x 72" FB x 96" TALL, 6500 LBS ESTIMATED WEIGHT, GOOD CONDITION.
100 Ton, Aida #PD010, mechanical press, 6.6"stroke, 2.9"adj., 50 SPM, 64.9"x23.5" bolster area
Machinery Marketing International | Chicago, IL
Category: Mechanical Press Brakes
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Aida
Model: PD010
Capacity: 100 Tons, Stroke: 6.60", Strokes Per Minute: 50, Bolster Area: 64.90" x 23.50", Slide Area: 49.20" x 19.60", Slide to Bolster: 15.7", Slide Adjustment: 2.90".
60 Ton, Minster #6, OBI Stamping Press, 3" Stroke, 3" Adjustment, 12" Shut H, 32" x 21" Bolster
Yoder Brothers Machinery | Toledo, OH
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Minster
Model: 6
SERIAL. 22486, MODEL. #6 OBI, CAPACITY. 60 TON, LENGTH OF STROKE. 3", SLIDE ADJUSTMENT. 3", SHUT HEIGHT. 12", BOLSTER SIZE. 32" X 21", SPEED. 45 SPM, BACK GEARED. YES, CLUTCH & BRAKE. AIR, CONTROLS. YES.
45 Ton, Precision #45G, gap frame press, 3" stroke, 11" Shut Height, 2.5"ram adj., 68 SPM, 28" x18"bed,air clutch & brake, 2000, #13566J
Timco Inc | Columbia, TN
Seller: Timco Inc
Location: Columbia, TN
Mfr: Precision
Model: 45G
Year: 2000
45, TON PRECISION GAP FRAME PRESS. STOCK# 13566J, MODEL #: 45G, SERIAL #: PN0172, 3" STROKE, 11" SHUT HEIGHT, 2.5" RAM ADJUSTMENT, 68 SPM, 28" x 18" BED, 17" x 13" RAM, AIR CLUTCH & BRAKE, PALM BUTTONS, INCH SINGLE AND CONTINUOUS MODES, BACK GEAR DESIGN, YEAR: 2000, GOOD CONDITION.
JUST ADDED!
300 Ton, Betenbender #12-300T, Hydraulic Press Brake, 12' long x 6" wide bed, 126-1/2" between housings, 6" stroke, 16" open height, 8" throat, 30 HP, 440 Volt, 3PH
Hildebrand Machinery Co Inc | York, PA
Category: Hydraulic Press Brakes
Seller: Hildebrand Machinery Co Inc
Location: York, PA
Mfr: Betenbender
Model: 12-300T
Year: 2002
300 TON X 12' BETENBENDER HYDRAULIC PRESS BRAKEPRICE: Loaded on Truck, Our Warehouse, York, PA …… $74,500.00, HMC Stock # 26002-P, Serial No.: 89902, Model: 12-300T, Year: 2002, Maximum Tonnage: 300, Bed Length: 144-1/2", Bed Width: 6", Distance between Housings: 126-1/2", Stroke: 6", Open Height: ...more
45 Ton, Bliss #C-45, mechanical OBI/gap frame press, 2" stroke, 8.5" Shut Height, air clutch & brake
S & G Press & Machinery Sales | Shelby Township, MI
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: Bliss
Model: C-45
Tonnage 45 tons, Stroke 2 inches, Shut Height 8.5 inches, Adjustment 4 inches, Bed Area 28" LR x 18" FB, SPM 90-180 VSPM, Highspeed Presses Highspeed Presses, Standard, Bliss Press Model C-45, Mechanical Gap Frame Metal Stamping, 45 ton Capacity, 2" Stroke, 8.5" Shut Height, 4" Adjustment, 28" x 18 Bed Area, 90-180 ...more
480 Ton, Baykal #APHS-4116x440, hydraulic press brake, 13' 5" OA, 139" between housing, 12.6" stroke, 23.2" DL, 19.7" throat, Delem 69W, 2 front support arms, (4) Back Gauge fingers, 2011
Westway Machinery Ltd | Mississauga, ON
Category: Hydraulic Press Brakes
Seller: Westway Machinery Ltd
Location: Mississauga, ON
Mfr: Baykal
Model: APHS-4116X440
Year: 2011
S:, Five (5) Axis CNC, Y1, Y2, X, R, plus CNC Crowning, Delem 69W Control (on mobile stand)Laser Safe Laser Beam GuardsPhysical Rear and Side Guarding Included, Safety Interlocked2 Front Support Arms Included, SlidingFour (4) Backgauge Fingers, MODEL: APHS 4116×440, CAPACITY: 13′ 5” X 480 TON, SERIAL ...more
Wysong #3596, hydraulic press brake
Bay Area CNC Machinery | Walnut Creek, CA
Category: Hydraulic Press Brakes
Seller: Bay Area CNC Machinery
Location: Walnut Creek, CA
Mfr: Wysong
Model: 3596
Condition UsedStock Number 47518888107.
70 Ton, TMP, Slab Side Hydraulic Press, 20" x 20"
TNT Industrial | Orange, CA
Category: Hydraulic Presses
Seller: TNT Industrial
Location: Orange, CA
Mfr: Tmp
70 Ton TMP Slab Side Hydraulic Press, 20" X 20"".
ATEK Bantam #B4120MF0, press brake, 1997
Smith Machinery Co | Ames, IA
Category: Hydraulic Press Brakes
Seller: Smith Machinery Co
Location: Ames, IA
Model: B4120MF0
Year: 1997
75 Ton, Bliss #C-75, OBI press, 4" stroke, 15" Shut Height, 3.5" ram adj., 50-100 SPM, 36" x24"bed, air clutch & brake, 1979
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Bliss
Model: C-75
Year: 1979
4" Stroke, 3.5" Ram Adjustment, 15" Shut Height, 50 -100 SPM, 24" x 19" Ram, 36" x 24" Bed, Air Clutch, Air Brake, Air Counterbalances, Palm Buttons, 80" LR x 85" FB x 136" Tall, Estimated Weight 18,000 Lbs.
60 Ton, Bliss #C-60, OBI press, 4" stroke, 13.75" Shut Height, 11" throat, 3" adjustment, air brake
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bliss
Model: C-60
SERIAL. HP53318/69984, MODEL. C60, CAPACITY. 60 TON, NEW. 19, STROKE. 4", ADJUSTMENT. 3", SHUT HEIGHT. 13.75", BED DIMENSIONS. 32" X 21", RAM SIZE. 17" X 12", THROAT DEPTH. 11", OPENING THROUGH BACK. 15", SPEED. 90 SPM, AIR BRAKE. YES, DUAL PALM BUTTON. YES, AUTO LUBE SYSTEM. YES, MOTOR. 5 HP.
220 Ton, Komatsu #OBS-200-61, gap frame stamping press, 11.8" stroke, 21.7"Shut Height, 4.72"ram adj., 25-50 SPM, 51.1"x33.1"bed, air clutch & brake, 2011
D & D Industries Inc | Monclova, OH
Category: Gap Frame Single Crank Press Machines
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Komatsu
Model: OBS-200-61
Year: 2011
11.8" STROKE, 4.72" RAM ADJUSTMENT, 21.7" SHUT HEIGHT OVER BOLSTER, 25-50 SPM, 57.1" X 33.1" BED, 33.5" X 25.6: RAM, PASCAL DIE LOADER, AIR CLUTCH, AIR BRAKE, AIR COUNTERBALANCE, PALM BUTTONS, HYDRAULIC OVERLOAD, 72"LR x 96" FB X 168" TALL, 47,500# ESTIMATED WEIGHT, 2011.
200 Ton, Verson #200GP2-72, 2 point gap frame press, 4" stroke, 18" Shut Height, air clutch & brake, serial #23983, #13760J
Timco Inc | Columbia, TN
Category: Gap Frame Double Crank Press Machines
Seller: Timco Inc
Location: Columbia, TN
Mfr: Verson
Model: 200GP2-72
VERSON 200 TON 2 POINT GAP FRAME PRESS, STOCK# 13760J, MDL# 200 GP2 72, S/N# 23983, CAPACITY 200 TON, STROKE 4", SHUT HEIGHT 18", RAM ADJUSTMENT 6", BED SIZE 84" LR X 24" FB, SLIDE AREA 72" LR X 24" FB, T SLOTTED RAM AND BOLSTER, ISOLATOR PADS, LINK BLACK MAX LIGHT CURTAINS, AUTO LUBE, AIR CLUTCH AND BRAKE, AIR ...more
4000 lb. Coe Press Equipment #CPR-PO-4018, non-motorized uncoiler, 24.5"mandrel, 18" width, 72" outside dimensions, 15"-21" ID, 6-keepers, air drag brake, manual expansion, 2002
D & D Industries Inc | Monclova, OH
Category: Uncoilers and Centering Coil Reels
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Coe Press Equipment
Model: CPR-PO-4018
Year: 2002
ORDER 4000, 24.5" MANDREL LENGTH, 6 KEEPERS, AIR DRAG BRAKE, MANUAL EXPANSION, 15" - 21" ID, 72" OD, NON MOTORIZED, YEAR MFG 2002, 57" LR X 55" FB X 80" TALL APPROX, 2500 LBS APROX.
2000 Ton, Nittan Massey #MHFP2000-LW, hot forging press line, 11" strtoke, 43.3" Shut Height, 200 HP
Perfection Global | Elk Grove Village, IL
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Nittan Massey
Model: MHFP2000-LW
Year: 2004
Capacity: 2000 TonStroke: 11.8"Shut Height: 43.3"Pressing Speed: 20 SPMIdling Speed: 60 SPMBottom Ram Size: 44.1" x 54.7"Main Wedge Top Surface: 40.9" x 55.3"Main Wedge Adjustment: 0.5"Mechanical Upper Ejector (Ram) Capacity: 10 TonMechanical Upper Ejector (Ram) Stroke: 1.2"Hydraulic Lot Ejector (Table) Capacity: 25 ...more
120 Ton, Komatsu #PHS110X310, wide bed hydraulic press brake, 10.2'OA, 105" between housing, 6.7"stroke
Mohawk Machinery Inc | Cincinnati, OH
Category: Hydraulic Press Brakes
Seller: Mohawk Machinery Inc
Location: CINCINNATI, OH
Mfr: Komatsu
Model: PHS110X310
10' KOMATSU 120 TON WIDE-BED HYDRAULIC, PRESS BRAKE, Serial No 10296, Model PHS 110X310, 10' KOMATSU 120 TON WIDE-BED HYDRAULIC, PRESS BRAKE, Serial No 10296, Model PHS 110X310, 18" x 122" T-Slotted Wide Bed Attachment, 18" x 122" Extra Wide Ram Attachment w/Bolt On, Angle Plates, Electric Depth-Stop ...more
165 Ton, Pacific #J165-12, CNC Press Brake, 12' overall, 126" Between Housing, 10" Stroke, 0' Throat, 15" Opening Heightm 460 V., 3 Phase, 30 HP, 1978
N S Machine Corp. | Granger, IA
Category: CNC Press Brakes
Seller: N S Machine Corp.
Location: Granger, IA
Mfr: Pacific
Model: J165-12
Year: 1978
, Manufacturer: Pacific, Model Number: J165-12, Stock Number: 13898, Model Year: 1978, s:, CNC 600 3-axis control, Light Curtains, Tonnage — 165, Overall length of bed and ram — 12’, Distance between housings — 126”, Capacity — 10’ x 1/4”, Throat depth — 7” ...more
10 Ton, Tishken #10, 4-post cut-off press, 1/2" stroke, Witchia air clutch & brake, 2" adjustment
Yoder Machinery Sales | Holland, OH
Category: Cut-off Presses
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Tishken
Model: 10
SERIAL. 500-18, MODEL. 10, CAPACITY. 10 TON, STROKE. 1/2", STROKES PER MINUTE. 60", SHUT HEIGHT. 4" TO 6", ADUSTMENT. 2", BETWEEN POSTS. 9" L/R, TOP RAIL. 3-1/2", BOTTOM RAIL 4-3/4" TO 3-1/2", AIR CLUTCH. WITCHITA, FLOOR TO BOTTOM RAIL.36-3/4" TO 38-3/4", AIR BRAKE. WICHITA.
10 Ton, Waterbury-Farrel #200-11, Transfer Press, Crank Eyelet, 11 Station, 4-1/4" center distance, 8" stroke, 80 SPM
National Machinery Exchange | Newark, NJ
Category: Eyelet Transfer Press Machines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Waterbury-Farrel
Model: 200-11
STATION. 11, TONS PER STATION. 10, BETWEEN CENTERS. 4-1/4, STROKE. 8", SPM. 40 TO 80, AIR CLUTCH AND BRAKE, CONDITION AS TAKEN FROM SERVICE, MOTOR DRIVE: 60 HP, 500 V D.C., 1750/2100 RPM, WITH CONTROLS.
75 Ton, Niagara #ES-75, OBI press, 8" stroke, 21" Shut Height, 90 SPM,air clutch & brake, #14199J
Timco Inc | Columbia, TN
Seller: Timco Inc
Location: Columbia, TN
Mfr: Niagara
Model: ES-75
NIAGARA 75 TON OBI PRESS, SN 47912, STOCK# 14199J, CAPACITY 75 TON, STROKE 8", SHUT HEIGHT 21", SPM 90, RAM 24" X 18.5", BED 36" X 24", AIR CLUTCH, AIR BRAKE, AIR COUNTERBALANCE, OAD 77"LR X 86" FB X 11' TALL, APPROX WEIGHT 17,000 LBS.
140 Ton, Wysong #THS140-120, high speed, 10' overall, 69" between housing, 8" stroke, 9" adj., #13915
Yoder Brothers Machinery | Toledo, OH
Category: Hydraulic Press Brakes
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Wysong
Model: THS140-120
Dimensions110" H, SERIAL. TH7-101, MODEL. THS140-120, CAPACITY. 140 TONS, OVERALL LENGTH OF BED & RAM. 120", DISTANCE BETWEEN HOUSING. 96" STROKE. 8" ADJUSTMENT. 9" MAX DIE SPACE. 17" "HIGH SPEED" BRAKE. YES, RAM SPEED APPROACH. 300 IPM RAM SPEED PRESS. 20 IPM RAM SPEED RETURN. 225 IPM DUAL PLAM BUTTONS. YES ...more
325 Ton, Standard #AB325-12, hydraulic, 125" between housing, 12' overall, 30 HP, 8" stroke, NEW
Smith Machinery Co | Ames, IA
Category: Hydraulic Press Brakes
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Standard
Model: AB325-12
TONNAGE FORMING/PUNCHING 325/230 DISTANCE BETWEEN HOUSINGS 10 5 BED/RAM LENGTH 12 feet BELOW GRADE no WEIGHT 42000 pounds TOP BED HEIGHT 39 inches BED WIDTH 12 inches THROAT DEPTH 10 inches RAM STROKE (FULLY ADJUSTABLE) 8 inches OPEN HEIGHT 16 inches CLOSED HEIGHT 8 inches HORSEPOWER 30 RAM SPEEDS (IN INCHES PER ...more
1000 Ton, Lake Erie, 37.5" x32", down-acting, 20" daylight, 7" stroke, frame-style, hydraulic tank, #2330
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Lake Erie
SERIAL #3364. FLOOR-STANDING. SINGLE ACTING 37.5" DIAMETER MAIN RAM WITH 7" MAX STROKE. 1000 TONS AT 1800 PSI. TWO SINGLE-ACTING CYLINDERS WITH 4.5" DIAMETER RODS WITH 7" STROKE THAT CAN CONTROL DESCENT AND USED TO PUSH THE PRESS OPEN. TWO 37.5" X 32" X 2" T-SLOTTED PLATES (BED AND SLIDE). MAX DAYLIGHT IS 20" WITH THE ...more
121 Ton, Aida #NC1-1100, straight side mechanical press, 36.4" x 20.5" bed, 4.3" stroke, 12.6" Shut Height, 3.54" adj., 50-100 SPM, 28" window, Wintriss Autoset 1504 load analyzer, air clutch & brake
Rygate, LLC | Clarkston, MI
Seller: Rygate, LLC
Location: Clarkston, MI
Mfr: Aida
Model: NC1-1100
Year: 1992
1992 AIDA NC1-1100, Tonnage. 121 T, Stroke. 4.33", Shut Height. 12.6", Bed area (Left to right). 36.4", Bed area (Front to back). 20.5", SPM min. 50 strokes/min., SPM max. 100 strokes/min., Adjustment. 3.54", Windows Width. 28", Air Clutch and Brake, Air Counterbalances, Press Control, PanelMate Touchscreen, Wintriss ...more
75 Ton, Minster #70-4-1/2, OBI press, 4" stroke, 3" ram adjustment, 70 SPM, 36" x 24" bed area,air clutch & brake, #13455J
Timco Inc | Columbia, TN
Seller: Timco Inc
Location: Columbia, TN
Mfr: Minster
Model: 70-4-1/2
MINSTER 75 TON OBI PRESS, STOCK# 13455J, MDL#70-4, S/N# 12222, CAPACITY 75 TON, STROKE 4", RAM ADJ. 3", SPEED 70 SPM, RAM AREA 24"LR X 18" FB, BED AREA 36"LR X 24" FB, MOTOR 7 1/2 HP, FLYWHEEL DESIGN, AIR CLUTCH & BRAKE, KNOCK OUT SLOTS, MOTOR & CONTROLS, TRIAD LIGHT CURTAINS, FLYWHEEL DESIGN.
100 Ton, Minster #P2-100, straight side double crank press, 1.5" stroke, 18" Shut Height,air clutch & brake, 150-300 SPM
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Minster
Model: P2-100
MODEL : P2-100-48, SERIAL #: 11977, 1 1/2" STROKE, 2" ADJUSTMENT, 11" SHUT HEIGHT, 110 - 160 SPM, 48" x 31" BED, 48" x 23" RAM, 16" WINDOWS, AIR CLUTCH, AIR BRAKE, AIR COUNTERBALANCE, ISB LIGHT CURTAINS, 15 HP 230/460/3/60, 30,000 LBS ESTIMATED WEIGHT, GOOD CONDITION.
100 Ton, Minster #P2-100, straight side double crank press, 1.5" stroke, 18" Shut Height,air clutch & brake, 150-300 SPM
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Minster
Model: P2-100
MODEL : P2-100-48, SERIAL #: 11977, 1 1/2" STROKE, 2" ADJUSTMENT, 11" SHUT HEIGHT, 110 - 160 SPM, 48" x 31" BED, 48" x 23" RAM, 16" WINDOWS, AIR CLUTCH, AIR BRAKE, AIR COUNTERBALANCE, ISB LIGHT CURTAINS, 15 HP 230/460/3/60, 30,000 LBS ESTIMATED WEIGHT, GOOD CONDITION.
45 Ton, Niagara #M-45, OBI press, 4" stroke, 11" Shut Height, 110 SPM,air clutch & brake, #14210J
Timco Inc | Columbia, TN
Seller: Timco Inc
Location: Columbia, TN
Mfr: Niagara
Model: M-45
NIAGARA 45 TON OBI PRESS, S/N 44982, STOCK# 14210J, TONNAGE 45, STROKE 4", SHUT HEIGHT 11", RAM ADJ 2 5/8", BED AREA 28"LR X 18" FB, RAM AREA 18"LR X 14" FB, SPEED 110 SPM, OAD, APPROXIMATE WEIGHT, ONE SHOT LUBE, AIR CLUTCH / BRAKE.
Haco #Optiform-Series, hydraulic press brake
Greenway & Associates Ltd | Orange City, IA
Category: Hydraulic Press Brakes
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Model: OPTIFORM-SERIES
Manufacturer HACO Optiform Series Hydraulic Press Brake Condition New Stock Number HACO Optiform.
Haco #Synchromaster-Series, hydraulic press brake
Greenway & Associates Ltd | Orange City, IA
Category: Hydraulic Press Brakes
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Model: SYNCHROMASTER-SERIES
Manufacturer HACO Synchromaster Series Hydraulic Press Brake Condition New Stock Number HACO Synchromaster.
