Buy or Sell Your 1000 Ton Press Brake

Used Aronson 50,000lb Positioner, Model: GE-500 EXP, Serial: 9180, 50,000 Pound Capacity @ 12'' C.O.G., 1,050,000 Inch-Pounds of Tilt Torque, 600,000 Inch-Pounds of Rotation Torque, 84'' x 84'' Square Table, Variable Speed Rotation, Powered Gear Elevation Max Center of Table to Floor - ...more

MAX COIL WEIGHT 1500 LBS, MAX WIDTH 18", ID RANGE 11.5" TO 17.5", MAX COIL OD 48", BRAKE SPRING LOADED.

SERIAL NUMBER. H69976, MODEL. C75, STROKE. 4", SHUT HEIGHT. 17" (SDAU), SLIDE ADJUSTMENT. 3-1/2", STROKES PER MINUTE. 60 TO 120, SLIDE AREA. 18" FB X 24" LR (T-SLOTTED), BED AREA. 24" FB X 36" LR, BOLSTER PLATE. 24" FB X 36" X 3-1/2", DISTANCE BETWEEN UPRIGHTS. 19", SHANK HOLE. 2-5/8", THROAT. 13", AIR CLUTCH & ...more

Year: 2020, Make: US Industrial, Model: US446, Tonnage: 44 Tons, Overall Length: 72", Ram Travel: 3.93", Weight: 7,700lbs, Dimensions: 101" x 60" x 80"H, CNC 2-axis control, Foot Pedal, Misc Punch Holders, *Personal inspection of all equipment is highly encouraged*, **Sold As-Is, Where-Is with ...more

NUMBER OF FPLAGE HEADS. (7), NUMBER OF 30 TON HEADS. 5, NUMBER OF 100 TON HEADS. 2, SERIAL 30 TON HEADS. 41760,47161,41762,41763,44144,41445,41446, MODEL 30 TON HEADS. 730-20, CAPACITY. 30 TONS, STROKE. 7/8", OPEN HEIGHT. 5/8", THROAT. 4-1/4", CYCLE TIME. 3 SECONDS, MODEL. FP-100, CAPACITY. 100 TONS, MAXIMUM HOLE ...more

MODEL #: PE-25/100 SERIAL #: 011775 98" BED 18" STROKE 80" BETWEEN HOUSINGS SPEEDS APPROACH 1.58 IPS BEND.28 IPS RETURN2.17 IPS PALM BUTTONS NO BACK GAUAGE 1988 10 HP 105" LR x 72" FB x 95" T 13,230 LBS ESTIMATED WEIGHT GOOD CONDITION.

PRESS LINE COMPONENTS:, HANS HENNING ROTARY BILLET FURNACE, 2800 TON VERTICAL EXPANSION PRESS, (2) IAS (SMS) PREHEAT UNITS, (2) IAS (SMS) INDUCTION HEATING UNITS, 7000 TON SCHLOEMANN EXTRUSION PRESS, PRESS RUNOUT, DIES, CONTAINERS, BACKING ASSEMBLIES, TOOLING, HANS HENNING ROTARY BILLET FURANCE, TYPE - NATURAL GAS ...more

Model: E2 300 72 48, Serial: 20068, 10” Stroke, 6” Power Ram Adjustment, 22” Shut Height, 30-60 SPM, 72” x 48” bed, T Slots Ram and 8" Bolster, 28” Windows estimated, Air clutch and Brake, Air Counter Balances, Omni Link II controls, Palm Buttons, Floor Standing, 143"LR x 96" FB x ...more

SERIAL.: A1445, MODEL.: 300-OBL-8, YEAR.: 1999, MAX CAPACITY.: 300, PUNCHING CAPACITY.: 225 TON, STROKE.: 12", OPEN HEIGHT.: 20", CLOSED HEIGHT.: 8", BOLSTER HEIGHT ABOVE FLOOR.: 41", BED SIZE.: 102" L-R X 48" F-B, RAM SIZE.: 94" L-R X 42" F-B, PRESS SPEEDS:, RAPID.: 480 IPM, FAST PRESS.: 130 IPM, NORMAL PRESS.: 48 ...more

, Manufacturer Perkins Model S-100-48-34 Condition Used Stock Number 10025 Capacity 100 ton Bed area 48"x34" Stroke length 6" Shut height (sdau over bed) 14" Slide adjustment (powered) 4" Strokes per minute 20-65 Windows (opening in side columns) 14" Overall dimensions 12' floor ...more

CAM-WOOD PT-48HF Feed Trough High Frequency Press4' X 8' Feed Through High-Frequency Presss: -- Mass production for wooden boards, 2 to 3 minute for curing a 4' x 8' wooden board -- Automatic infeed, outfeed cycle, mass production within 3 - 5 minutes is ready for output. -- Shortens manufacturing ...more

CAPACITY300 US TONS (RATED 1/2″ UP) STROKE:16″ SHUT HEIGHT TO BED:26″ BED AREA:120″ RL X 48″ FB STROKES PER MINUTE:30 SPM RAM ADJUSTMENT:12″ (MOTORIZED) RAM AREA:120″ RL X 48″ FB (T-SLOTTED) BOLSTER SIZE:4-3/4″ TH X 120″ RL X 48″ FB (T-SLOTTED) WINDOW ...more

SERIAL. 74026, MODEL. OBI60, CAPACITY. 60 TON, STROKE OF SLIDE. 3", SLIDE ADJUSTMENT. 3-1/2", SHUT HEIGHT, SDAU. 13", AREA OF BED. 32" X 21", AREA OF RAM. 13" X 12", STROKES PER MINUTE. 100, WIDTH OF HOLE THROUGH BACK. 15-1/2", HOLE IN BED. 15-3/4" X 10-3/4", AIR CLUTCH AND AIR BRAKE. YES, FLYWHEEL TYPE. YES, DRIVE ...more

TOTAL OF FOUR DOUBLE-ACTING HYDROLINE HYDRAULIC CYLINDERS (TWO ON "FRONT" PRESS; TWO ON "REAR" PRESS) MODEL N2R-4X8-4C8210-099-01B RATED TO 3000 PSI. 4" BORE WITH 8" MAX STROKE. "FRONT" PRESS IS SET UP WITH SIX 31" X 14" X 2.5" ELECTRICALLY HEATED PLATENS RESULTING IN FIVE OPENINGS OF APPROX 4.5" TO 5" EACH. THE TOTAL ...more

Amada RG80 Press Brake (subject to buyer verification):Capacity: 80 TonsTable Length: 94.6”Max Bending Length: 98.7”Distance Between Uprights: 80.8”Throat Depth: 15.76”Length of Stroke: 3.94”Open Height: 14.58”Power Required: 6 KVAOverall Length x Width x Hight: 98.7” x ...more

150 Ton X 12’ Press Brake with Automec CNC Backgauge., Tonnage: 150 Ton, Overall Length: 12’, Distance Between Housings: 124”, Stroke: 4.7”, Open Height: 12.8”, Closed Height: 8.1”, Throat Clearance: 9.8”, Approach Speed: 165” / Min, Form Speed: 18” / Min, Return ...more

Baileigh BP-6788 67 Ton x 8' Press Brake, Model BP-6788, S# 3728, Date Mfg. 06/2012, 67 Ton x 8' capacity, 11.81" From table to ram, Approach speed 3.14"/sec, Bending speed 0.275"/sec, Min. return speed 2.36"/sec, 35 Gallon reservoir, Manual/Jog/Auto control, Front operated back gauge, Foot pedal control, 220v 3ph ...more

, Model: SE2-1000-108-60, Stroke: 20", Shut-Height: 30/42", Adjustment: 12/24", SPM: 18, Bed Size: 108" x 60", Bolster Thickness: 12", Window: 76" x 74", Machine Type.Presses, Straight Side Manufacturer.NIAGARA Model.SE2-1000-108-60 Year.1989 Condition.Used.

Make: Cincinnati, Model: 90 CBII x 6 FT., Year: 1996, Machine Location: Texas, Capacity: 90 Tons, Overall Length of Bed & Ram: 8’, Distance Between Housings: 6’6″, Stroke: 8”, Open Height: 15”, Closed Height: 7”, Throat Clearance: 7”, Approach speed: 150–260 IPM ...more

SERIAL. 58751, MODEL. HDE200-12, YEAR NEW. 1998, CAPACITY. 200 TON, LENGTH OF BED & RAM. 144", DISTANCE BETWEEN HOUSING. 124", STROKE. 0" TO 7.8", OPEN HEIGHT., CLOSED HEIGHT., DEPTH OF THROAT. 11.8", RAM SPEED FORMING. 21 IPM, RAM SPEED APPROACH. 189 IPM, RAM SPEED RETURN. 224, CNC BACK GAUGE. MANUAL, PASSLINE ...more

SERIAL. HFB017040H991010, MODEL. HFBO, YEAR NEW. 1999, CAPACITY. 190 TON, LENGTH OF BED & RAM. 13'6", STROKE. 7", OPEN HEIGH. 17.70", DEPTH OF THROAT. 16.1", RAM SPEED FAST APPROACH. 230 IPM, RAM SPEED SLOW BEND. 16 IPM, RAM SPEED FAST RETURN. 180 IPM, ETS 3000 TOUCH SCREEN CONTROLS. YES, OPERATOR SWING ...more

SERIAL. 355-1950163, MODEL. 35 OBI, CAPACITY. 35 TON, STROKE OF SLIDE. 2", SLIDE ADJUSTMENT. 2-1/4", SHUT HEIGHT, SDAU. 10", AREA OF BED. 24" X 15", AREA OF SLIDE. 15" X 10', STROKES PER MINUTE. 100, WIDTH OF HOLE THROUGH BACK. 11-3/4", DEPTH OF THROAT. 8-1/4", BOLSTER. YES, AIR CLUTCH AND AIR BRAKE. YES, DUAL ...more

Make: Wysong, Model: FAB 400-120, Year: 1998, Machine Location: Wisconsin, Capacity: 400 Ton, Bed Length: 10′, Stroke: 16″, Adjustment: 15″, Max Die Space: 25″, Machine Weight: 45,000 LBS, Dimensions: 138.50” tall x 135” wide x 74” deep, Cybelec ModEva Pac Control, Backgauge.

ACCURPRESS 725012 250 Ton 12' Hydraulic Press Brake, Maximum Tonnage: 250 Tons, Maximum Bending Length: 12', Distance Between SIde Hems: 124", Maximum Stroke Length: 8", Throat Depth: 10", Closed Height: 8", Back Gauge: X Axis CNC Backgauge, Overall Dimensions: 178" x 64" x 100", Weight Approx.: 30,000 lbs. ...more

PRELIMINARY, NEFF C-FRAME HYDRAULIC DOWN ACTING PRESS, OPEN BACK FRAME, S/N P8764, 40 TON CAPACITY, 6" STROKE, 12" DAYLIGHT, 8" THROAT, 22.5" LR X 12.5" FB BED AREA, 4.40" X 6" CUT OUT BOTTOM BOLSTER, MOTOR, ELECTRICS, & HYDRAULIC PACKAGE, OPERATOR PALM CONTROLS, 42.4 TONNAGE @ 3000 PSI MAX. PRESSURE, 6" DIA. ...more

UTUBE NUMBER: 4102, MANUFACTURER: RLM, Capacity: 150 Ton, Stroke: 2″, Shut Height: 17″ Minimum, Base to Press Bed: 52″, Post Diameter: 4.5″, Bed: 106″ x 71.5″, Ram Adjustment: 12″+, Distance Between Posts: 83.5″ x 46″, Motor: 40 HP, Upgraded Control Panel ...more

Capacity – 1500 US Tons, Model DE4P-1500, Bed: 240” x 98” (6000 x 2500mm), Stroke: 36” (900mm), Shut height: 56” (1600mm), Strokes per minute: 10-40 (Variable), Windows, Rolling bolster (front-to-back), Year of manufacture – 2017, LIKE NEW CONDITION, May be inspected under power.

Strippit LVD Hydraulic Press Brake, Model: PPEB 350 BH 13, -Tonnage: 350 Ton, -Type: Hydraulic, -Overall Bending Length: 13', -Between Housings: 10'-4", -Stroke: 11.8", -Control: CNC, -Weight: 60,000 lb. approx., -Easyform Powered Part Injector, -Front Operated Powered Backgauge, -Front Support on guide rails ...more

200 TON PRESSMASTER ROLL-IN TABLEFULL 4 AXIS POWERED STRAIGHTENING PRESS RATED CAPACITY. 200 TONSWIDTH BETWEEN UPRIGHTS. 60"DEPTH BETWEEN POSTS. 20-1/4"MAXIMUM RAM TO TABLE.″2"STROKE. 20"CYLINDER TRAVEL. 27-3/4"TABLE TRAVEL. 28-1/4"FLOOR TO TABLE TOP. 26-3/4"CYLINDER BORE SIZE. ...more

, Bed Size: 157" x 102", Tonnage: 1500 tons, Stroke: 18 inches, Shut Height: 47 inches, SPM: 10-40, Adjustment: 6" (150 mm), Shut Height: 47.2" (1200 mm), Press Force from 12.5 mm before BDC: 1500 kN, Working Energy of Slide Per Stroke in Continuous Operation at 10 SPM: 240 kJ, Height from Press Bed to Top of Bolster ...more

MODEL #: M-35, SERIAL #: 51282, 3" STROKE, 10.5" SHUT HEIGHT, 2.25" RAM ADJUSTMENT, 57-107 SPM, 24" x 15" BED, 15" x 12" RAM, LINK 501 CONTROLS, AIR CLUTCH & BRAKE, AIR COUNTERBALANCE, PALM BUTTONS, WINTRESS LIGHT CURTAINS, WINTRESS LOAD ANALYZER, DANFOSS FREQUENCY DRIVE FOR SPEED CONTROL, 48" LR x 60" FB x 102" ...more

Manufacturer: Niagara, Model: Niagara SE2-200-72-42-UH Press, Condition: Very Good, Location: Jackson, MI Cooper Building, Year: Year Unknown, Machine #: 5895, CAPACITY 220 TONS, STROKE 6, MAX. SHUT HEIGHT TO BED 28, BED AREA 72 X 42 (RL X FB), RAM AREA 72 X 42 (RL X FB), BOLSTER PLATE 72 X 42 (RL X FB) X 8 THICK ...more

2008 TRUMPF TRUBEND 3066 press brake, used condition, 73-ton hydraulic capacity, 82" overall length, 69" between housings. s Delem T3000VA-2 control and 3-axis back gauge. Ideal for precision metal bending tasks., 2008 TRUMPF TRUBEND 3066, Tonnage. 73 T, Type. HYD, Overall Length. 82", Between Housings. 69", Delem ...more

125 Ton X 10’ CNC Press Brake with Delem DA53T Control, Front DSP Laser Curtain, Quick Punch and Die, Side Fence, Rear Door with Interlock Switch, CNC Crowning Device, Linear Guideways & Ball Screw on Backgauge, Oil Cooler and 5 - Axis Control (Y1, Y2, X, R+V). Precision European Style Tooling Included ...more

, Model Number: HFP-50, Manufacturer: MachineCo (Canadian Press Division), Power: 5 HP, 1 Phase, Bore: 7″, Stroke: 16″, Rod: 3.0″, Ram speed: Press – 18 IPM, Return – 22 IPM, Capacity: 50 Tons, Weight: 2,200 lbs, Dimensions: 50″ Length x 82″ Width x 98″ Height, Made in ...more

MINSTER E2-250-60-44, Tonnage. 250 T, Stroke. 2", Shut Height. 20", Bed area (Left to right). 60", Bed area (Front to back). 44", SPM min. 100 strokes/min., SPM max. 200 strokes/min., Adjustment. 3", Windows Width. 21", Air Clutch and Brake, Air Counterbalances, Motors and Controls, Rockford SSC-1500 Control ...more

Stock # 102168, Condition Used, Tonnage 300 tons Stroke 12 inches Shut Height 25.25 inches SPM 18 Vari Speed (Yes/No) no Bed W 102 inches Bed L 48 inches Model: #300-48-102 Capacity: 300 Ton Stroke Of Slide: 12" Power Slide Adjustment: 6" Shut Height, SDAU: 24-1/4" Area Of Ram T Slotted Ram: 102" X 48" Windows: 26" ...more

KAAST 100 TON H FRAME HYDRAULIC PRESS BRAKE, PRICE: Loaded on Truck, Our Warehouse, York, PA … $24,500.00, HMC Stock # 23137, Machine Serial No.: 1811413, Machine Model No.: HPA-P 100/60, New Date: 2022, Rated Tonnage: 100 Tons, Max Pressure: 3815 PSI, Stroke: 11.8", Width of Working Area: 60", Daylight: ...more

Schultz Tool Veneer Bladder Membrane Press, Seller′s Soecification:, - Veneer Membrane Press, - Approx. 55″x106″ press capacity, - Hot air design w/ 3mm silicone membrane, - –, - Typical cycle time of 3 min. using proper glue that sets at 200° F, - Can use PVA, but extends cycle time to ...more

MODEL #: 90-400, SERIAL #: N/A, 3" STROKE, 1/2" RAM ADJUSTMENT, 15.5" SHUT HEIGHT, 20" LR x 22" FB BED 2.25" THICK BOLSTER 15" LR x 20" FB RAM, AIR CLUTCH, AIR BRAKE, PALM BUTTONS, 30 SPM 2" THICK REMOVABLE RAM PLATE 25,000 LBS ESTIMATED WEIGHT 40 HP 230/460 APPROXIMATE DIMENSIONS: 75" LR x 75" FB x 134" TALL GOOD ...more

MODEL #: S2-250 -96-48, SERIAL #: 21751, 6" STROKE, 23" SHUT HEIGHT ON TAG 26" ACTUAL SHUT HEIGHT, 8" RAM ADJUSTMENT, 35 SPM, 4" BOLSTER, 104" BETWEEN UPRIGHTS, 96" x 48" BOLSTER, 96" x 48" RAM, 24" WINDOWS, AIR CLUTCH & BRAKE, 3 AIR COUNTERBALANCES, 12" KNOCKOUT HOLE, 25 HP 230/460, 125" LR x 97" FB x 161" TALL ...more

Tonnage 100 tons, Stroke 2.00 inches, Shut Height 22 inches, SPM 160, Vari Speed (Yes/No) yes, Bed W 31 inches, Bed L 48 inches, Crank (Single/Double) double, Air Clutch (Yes/No) yes, CNC Control yes, Type of CNC Control Minster, Dimensions 132T x 97W x 60D, Weight 33000 pounds, Air Clutch and Brake Recirculating ...more

22" MANDREL WIDTH, 11.5" - 17.5" ID, 60" OD, NON POWERED, MANUAL EXPANSION, MANUAL DRAG BRAKE, 40" X 28" X 36"T APROX., 450 LBS APROX.

Year: 2005, Make: Amada, Model: RG-3512LD, Tonnage: 38 Tons, Overall Length: 47.2", Between Housing: 40.2", Stroke: 3.94", Open Height: 14.57", Throat Depth: 7.9", Weight: 3,900lbs, Dimensions: 58" x 59" x 77", LD Control, 2 Finger Assemblies, Full set of Punch Holders ...more

SERIAL. 506302, MODEL. RG-50, CAPACITY. 50 TON, BED LENGTH. 78.8", DISTANCE BETWEEN FRAME. 82.1", THROAT DEPTH. 15.76", STROKE. 3.94", OPEN HEIGHT. 14.56", CONTROL. AMADA NC9-EX, BACK GAUGES. YES.