Buy or Sell Your 1000 Ton Press Brake

CINCINNATI 230 TON CB X 12 HYDRAULIC PRESS BRAKE, MODEL: 230CB X 12, CAPACITY | 230 TONS, OVERALL BENDING LENGTH | 14', DISTANCE BETWEEN HOUSINGS | 12'6", STROKE | 10", MULTIPLE DEPTH STOPS (4), PALM BUTTON STATION, FOOTSWITCH, TONNAGE CONTROL, BED PLATE 5" BELOW GRADE, MOTOR: 25 HP 240/480V 3PH (CURRENTLY WIRED 480V).

Cincinnati Press Brake 12 1/4 Capacity, Heavy-duty Cincinnati press brake, built for real production work., * 12 ft bending width, * 1/4 capacity, * Includes 2 sets of dies, * Solid machine, no structural issues, Well-maintained and ready to run., 1950 CINCINNATI 90-4.

Stock #: 151260006, Location: Northeast, Brand: Durma, Model: CNC HAP 30160, Skidding Fee: Not Available, Loading Fee: Rigging Required, Max Tonnage: 176 Tons, Max Bed Length: 10', Max Distance Between Housing: 100", Max Stroke: 7.87", Main Motor: 20 HP, CNC Back Gauge, Delem Control, Foot Pendant Control ...more

SERIAL NUMBER. C0408-0077 MODEL. NC1-80(2) STROKE. 6.3" SPEED. 40 TO 85 SPM DIE HEIGHT OVER BOLSTER. 12.6" SLIDE ADJUSTMENT. 3.15" SLIDE AREA: LR X FB. 21.3 X 18.1" BOLSTER AREA LR X FB. 37.4 X 23.6" CLUTCH & BRAKE. AIR CONTROLS. YES, PALM & FOOT TRIP MAIN MOTOR. 10 HP.

Spec, ERMAKSAN GP FX SERVO 1003.

Spec, VARTEK ADVANCE FORM 4100-220.

NEW 200 TON x 8" US INDUSTRIAL MODEL USHB200-8 CNC HYDRAULIC PRESS BRAKEBase Price PORSTANDARD EQUIPMENTRam Deflection AdjustmentMechanical Ram Depth ControlMassive Torsion Bar For ParallelismForged Heavy Duty Cylinder & Cylinder BodyThree Speed RamRapid Approach, Bending Cycle & Rapid RetreatBottom Time ...more

, Air clutch, Air brake, Air counter balance cylinders, Back geared 49 SPM, Palm buttons, T-slot in Bolster.

Bradbury D3-30-12 Roll Forming Line  Number of Stands: 12Roll Space: 30"Arbor Diameter: 4"Arbor Center to Center Distance: 28"Upper Arbor Adjustment: 6.5"Vertical Adjustment: 7" - 13.5"Line Speed: 80 FPMOverall Line Length: 110'Line Direction: L-RAll Lower Arbors Power Driven  Upper Arbor Stands 1, 2, 11 ...more

Capacity: 50 tonLength : 8 ft. 78 ” b.h.Stroke : 6″Max.open: 15″Motor h.p.: 3Voltage : 220/440Approx. wt.: 9,000 lbs.Options or Upgrades, Operator pedestal with palm buttons8 ft. die holder.

400 Tons16'12'12"20"8".

135 TON X 18' PACIFIC MODEL #FF-135-18-II-S HYDRAULIC PRESS BRAKE, SERIAL.: A111, MODEL.: FF135-18IIS, CAPACITY.: 135 TON, BED LENGTH.: 18', DISTANCE BETWEEN HOUSINGS.: 16'6", STROKE.: 10", THROAT DEPTH.: 7", CONTROL.: CYBELEC DNC 880S.

Spec, ERMAKSAN POWER-BEND FALCON.

Tonnage 60 Distance Between Housings 76" Open Height 14" Closed Height 6" Bend 25 IPM Throat 8" S: Original Backgauge Parts Included but NOT Functional.

OTINUS SPECIAL OFFER: 0% LEASING! Don't wait for a better moment – it's now. Otinus machines with financing at no extra cost. A straightforward offer: you only pay the cost of the machine. Optimize your taxes in 2026 and choose reliable equipment. Contact us to find out more!, Tonnage: 237 t Motor Output: 15.0 ...more

Product Information, Press Brakes Type:Hydraulic Bed length:14' Between housings:12' Depth of Throat:10" Stroke:8" ::Phases: 3 Dimensions:62" x 175" x 133" Capacity:350Ton, Product Code: 03040112202 Make: Wysong Model: 350-12 Serial Number: HPB10-100 Condition: Used.

Machine Type.Brakes, Mechanical Manufacturer.CHICAGO DREIS & KRUMP Model.N/A Year.N/A Condition.Used.

Remanufactured by Federal in 2000 Serial#5A-506 Capacity: 60 Ton Stroke: 4” Adjustment: 2.5” Bed Size: 29.5” lr x 18.5” fb Ram Size: 14” lr x 10” fb Shut Height: 10.25 Speed: 90 SPM Throat Depth: 10”, Air Clutch, Air Brake.

The 1999 Durma 12 foot 220 ton hydraulic CNC press brake with Delem 65 controls is a powerful and versatile piece of metalworking equipment. The CNC control system allows for precision and accuracy in bending and forming metal materials. With a capacity of 220 tons, this press brake can handle a wide range of ...more

Serial#5A-2457 Capacity: 60 Ton Stroke: 4” Adjustment: 2.5” Bed Size: 32” lr x 21” fb Ram Size: 14” lr x 10” fb Shut Height: 12.25 Speed: 90 SPM, Air clutch, Air Brake Throat Depth: 11.5”.

CHICAGO 8L10.

THE WYSONG H-2052 IS A HYDRAULIC PRESS BRAKE WITH A 20-TON CAPACITY. IT S AN OVERALL LENGTH OF 52 INCHES AND A STROKE OF 2.5 INCHES. THE MACHINE PROVIDES AN OPEN HEIGHT OF 10 INCHES AND A THROAT DEPTH OF 6 INCHES. RAM ADJUSTMENT CAPABILITY IS 3 INCHES. POWER IS SUPPLIED BY A 5 HP MOTOR.

230 Ton X 12’ Hydraulic Press Brake with Palm Button, Footswitch, Multiple Depth Stops (4), Tonnage Control and Bed Plate 5” Below Grade., Capacity: 230 Tons, Overall Bending Length: 14’, Distance Between Housings: 12’ 6”, Stroke: 10”, Motor: 25 HP, 240 / 480V, 3Ph, Approx. Overall ...more

Press Capacity: 392 TonPress Ram Stroke (Up Acting): 16"Press Ram Diameter: 20"Max Daylight: 16"Transfer Tonnage: 98 TonTransfer Ram Stroke: 24"Transfer Ram Diameter: 10"Platen Area: 24" x 24", Electrically Heated PlatensMounted on Base.

Used 230 Ton Cincinnati 230CBx10 Hydraulic Press Brake for sale. s a 144" bed and 126" between housings. Includes 10" stroke, 7" shut height, 17" daylight opening, and 8" throat with Hurco Autobend 7 back gauge., Capacity: 230 Ton (Low and Medium Speed), Overall Bed: 12', Distance Between Housings: 10'6" ...more

Preliminary, Wysong Hydraulic Press Brake with Back Gauge, Model PH250-144, 250 Ton Capacity, 144" Bed, 10" Stroke, 19" Max Die Space, 126" Between Housings, Back Gauge, 230 V / 3PH / 60 Hz, Subject To Verification; Subject To Prior Sale & Price Change.

72 Tons X 83” Press Brake with Delem DR-66T 8 - Axis Control., Tonnage: 72 Tons, Type: Electric, Overall Length: 83”, Distance Between Housings: 93”, Stroke: 11.8”, INCLUDES: Delem DR-66T 8 - Axis Control., ***We strongly encourage personal inspection of all pieces of used equipment***, ***All ...more

72 Tons80"92.9"6.3" /sec6.3" /sec31.5"19.69" /sec9.84"13.78"39.37"11.8123.2312,458 lbs.152.4 x 113.8 x 90.2"H.

SERIAL.: 527, MODEL.: 918-527, TONNAGE.: 100, STROKE.: 42", OPEN-HEIGHT.: 60", CLOSED HEIGHT.: 18", PRESSING SPEED:, APPROACH.: 85 I.P.M, PRESSING.: 0 TO 17 I.P.M, BREAKAWAY.: 0 TO 38 I.P.M, RAPID RETURN.: 194 I.P.M, BED SIZE.: 84" X 48", BETWEEN POST.: 60" X 60", ROLLING BOLSTER. DOES NOT NEED HOOKED UP TO RUN ...more

Salvagnini presents the B3 KinEtic series of press-brakes, the fruit of the synergy of the company's knowledge of panel-bending and brake-forming technology.\r, \r, This original solution combines a number of innovative design solutions and applies the latest technology available on the market, creating a ...more

SERIAL #3364. FLOOR-STANDING. SINGLE ACTING 37.5" DIAMETER MAIN RAM WITH 7" MAX STROKE. 1000 TONS AT 1800 PSI. TWO SINGLE-ACTING CYLINDERS WITH 4.5" DIAMETER RODS WITH 7" STROKE THAT CAN CONTROL DESCENT AND USED TO PUSH THE PRESS OPEN. TWO 37.5" X 32" X 2" T-SLOTTED PLATES (BED AND SLIDE). MAX DAYLIGHT IS 20" WITH THE ...more

Designed to increase scrap value while maintaining stable production control, the ENERPAT BM-1090 Single Output Metal Chip Briquetting Press converts loose machining chips into dense, uniform briquettes with consistent size and weight. Its single-output hydraulic design ensures steady production flow, making it ideal ...more

MODEL.H60-72, Capacity.60 TON, Length.72", Distance Between The Housing.54", Stroke.6", Adjustment.3", Die Space / Open Height.15", Motor.7.5 HP, Floor Space., Height., Weight.11,000 Lbs., Back Gauge.Yes, Dual Ram Counter Balance.Yes, Power Ram Adjustment With Indicators.Yes, Dual Palm Control On Ram.Yes, One Shot ...more

SERIAL. 5937, MODEL. J-165-14, CAPACITY. 165 TON, LENGTH, BED & RAM. 168" (14'), DISTANCE BETWEEN HOUSINGS. 150" (12'6"), STROKE. 10", OPEN HEIGHT. 15", THROAT DEPTH. 7", THROAT HEIGHT. 11", PASS LINE HEIGHT. 36".

Used Amada HFB-8025 (1998) CNC Press Brake for Sale. This pre-owned Amada CNC press brake is located in The United States. If you have any questions regarding this Amada Press Brake, please feel free to contact us. You may Activate Pricing to view the price of this CNC Machine, or request a quote by clicking on the ...more

1997 Amada HFB1253 138 Ton x 10 CNC Hydraulic Press Brake for sale. s include 106 distance between housings, 7.8 stroke, 18.5 open height, and 6-axis back gauge. Operatuer CNC controls enhance precision. Ideal for heavy-duty tasks., Serial Number: HFBO 125 30 H970518, Year: 1997, Capacity: 138 Ton, Overall Bed / Ram: ...more

SERIAL. 01508, MODEL #. P80X 10, YEAR NEW. 1983, CAPACITY. 80 TON, LENGTH OF BED & RAM. 10', DISTANCE BETWEEN HOUSING. 102-1/2", STROKE. 4", OPEN HEIGHT. 11", THROAT. 10", DUAL PALM BUTTON. YES, ELECTRIC FOOT PEDAL. YES, INCHING. YES, MOTOR HORSEPOWER. 7-1/2.

Spec, 2012 ERMAKSAN POWER BEND FALCON 3760 X 175, Tonnage. 192 T, Overall Length. 148", Between Housings. 128", Stroke. 10.8", # Axis. 4, Cybelec DNC600S Control, Y1, Y2, X Axis, Manual Crowning, Ram-Mounted Laser Safety.

The Cincinnati 135CB 10ft Hydraulic Press Brake is a reliable, heavy-duty metal forming machine designed for precision bending, punching, and shaping of sheet metal and structural plate. Ideal for fabricating electrical enclosures, HVAC ductwork, structural brackets, truck and trailer components, and heavy industrial ...more

Used Trumpf 5170. This pre-owned Press Brake is in great working condition and can be securely delivered to your facility floor. If you have any technical questions about this Trumpf Press Brake we can review machine. To request a quote, inquire about rigging and trucking or to schedule an inspection, contact us ...more

325 Ton X 16’ Hydraulic Press Brake with Siemens Simatic Control and Floor Standing., Tonnage: 325 Tons, Bed Length: 16’, Distance Between Housings: 173”, Stroke: 8”, Daylight: 16”, Bed Width: 12”, Throat Depth: 10”, Dimensions: 216” X 80” X 144” H, Estimated ...more

Make: LVD, Model: 350 BH 15, Year: 2006, Machine Location: Upon Request, 350 Tons X 15′ PPEB Turbo machine, Updated LVD Control system, 5 axis backgauge: X,R,Z1,Z2,X prime, Iris imaging system, 350 gallon oil capacity, 51,000 lbs.

OTINUS SPECIAL OFFER: 0% LEASING! Don't wait for a better moment – it's now. Otinus machines with financing at no extra cost. A straightforward offer: you only pay the cost of the machine. Optimize your taxes in 2026 and choose reliable equipment. Contact us to find out more!, Tonnage: 193 t Motor Output: 15.0 ...more

95 tons8’ longOptions or Upgrades, Automec CNC 150 1-axis control.

Used 1990 Amada FBD 5020E Press Brake very good condition! More pictures available on request..

Tons.

Spec, DURMA ADS 30135.

DURMAZLAR (USED) MODEL CNC HAP 40200 PRESS BRAKE, 220 US TON, 8.3" STROKE, 5 STROKE IN A MINUTE, 121 LBS TOP TOOL WEIGHT, 170 BOTTOM TOOL WEIGHT, 39.6 GAL LUBRICANT CAPACITY, DELEM DA-65 CONTROL, 6-AXIS BACKGAUGE - X1X2,R1R2,Z1Z2, CNC CROWNING.