Buy or Sell Your Wide Belt Sander

SERIAL.6HP, MODEL.440603, WIDTH OF BELT. 8", LENGTH OF BELT. 107", AREA OF TABLE. 24" X 11", COOLANT. YES, MOTOR HORSEPOWER.5.

Njm, Model Unisort 32, automatic, stainless steel, compact, bulk plastic bottle unscrambler. Rated from 20 to 200 containers per minute – depending on materials and application. Container size range: 35cc to 950cc and 1" to 4" OD x 1.5" to 7.5" in Height. and capable of orienting round ...more

Pester, Model 450, automatic in line stainless steel, shrink bundler. Rated from 10 to 40 cycles per minute with number of product – depending on materials, application pack pattern and machine configuration. Bundle size range: 1" to 9½" in Length; up to 16" in Width; ¼" to ...more

Burr King 2 1/2″ x 60″ Variable Speed Two Wheel Belt Grinder, 960-250, Inventory # 6167, Model: 960-250 (Variable Speed), SKU: 92110, Made in USA, Burr King’s family of two wheel grinders provides vigorous contact wheel, workrest and platen grinding in a frame design that pivots to ideal work ...more

This 2021 RBT 42” Mobile Conveyor is a high-capacity, diesel-powered unit designed for flexibility and heavy-duty use., Hours: 807, Inspection: Final inspection completed, and unit verified to spec, Maintenance: Excellent operating condition with all standard equipment included., Model: Specialized Model 4255 ...more

BMI stainless steel frame belt conveyor. 4½" wide x 120" long Delrin table top product conveyor belt, adjustable guide rails and has 31" to 37" in feed and discharge height range. Mounted on (4) leg stainless steel leg frame with leveling pads., OAD: 120"L x 24"W x 38"H.

MODEL #: MSB 900, SERIAL #: TP1614-11, 36" MAXIMUM WIDTH, MOTORIZED TABLE HEIGHT ADJUSTMENT, DIGITAL HEIGHT READ OUT, ELECTRIC OSCILLATION, 2 SPEED CONTACT ROLLER 1800/3600, 4-12' M/MIN VARIATOR (FEED RATE), BELT TENSION SWITCH, GRIVA DUST COLLECTOR, 460 VOLT, YEAR: 1994, GOOD CONDITION, * GRINDINGMASTER IS A DIVISION ...more

MODEL. BG8, WIDTH OF BELT. 8", LENGTH OF BELT. 107", TABLE SIZE. 15" X 13", HORSEPOWER MAIN MOTOR. 7-1/2.

Great Lakes HVP41737, fully automatic shrink bundler and tunnel rated from 5 to 20 bundles per minute – depending on materials and application. dual upper and lower film arbors, powered film feed, 36" wide x 24" long in feed conveyor, adjustable product guides. 36" wide hot wire cutoff seal ...more

Heat & Control, Model 8-44-DRYER, stainless steel electric heated drying conveyor. a 43" wide x 128" long stainless steel mesh belt and 44" wide x 4" high aperture, 96" long tunnel with (60) 1000W heating elements and electric lift hood., OAD: 135"L x 76"W x 87"H.

Used 19" x 18' RMZ Fordertechnik belt conveyor, model FB-M-500-2, carbon steel housing, approximately 500mm(19.6") wide x 5270mm(17.28') long rubber belt, driven by 1.5 kw, 230/460 volt motor drive, serial# P12046-01, built 2012.

Discharge Height: 52" or 36" Loading Height: 34" Belt Width: 11.5" Belt Divider Height: 1.5" Belt Length: 136" Incline (approx): 20deg Overall Footprint (LxWxH): 163" x 38" x 64" Voltage 110v.

, Portable Stainless Steel Inclined Belt Conveyor/Feeder 22" wide built by HFA Conveyors. 93" high Discharge. 75" OAL. inlet hopper is 6' wide and 44" long with a 30" depth. 101" OAH. 1.5" H belt cleat. 7.5" between each cleat. 22" belt width. Appears Unused., Spec Sheet, HFA CONVEYORS..

Hoppmann Belt Orientor, Automatic, bottle orienter. Uses two 5"L x 1/2"W side belts to orient bottles by their neck using photoeye feedback. Has belt gap up to 8 1/2" wide, 36" hand crank vertical head adjustment, thumb screw adjustment for belt gap, four feedback photoeyes, and E-stop. Designed to ...more

Used 18' L x 24" Wide Flatbelt Conveyor 11" High Side Walls 12" Pully Diameter DOES NOT HAVE GEARBOX OR DRIVE, PREVIOSULY DRIVEN BY HYDRAULIC MOTOR Approximate Dimensions: 20' L x 4' W x 2' H.

SERIAL. #RK15203, MODEL. CSB2-900, WIDTH OF ABRASIVE BELT. 36", WIDTH OF CONVEYOR BELT. 33, LENGHT OF ABRASIVE BELT., MAXIMUM PART THICKNESS. 0 TP 6", LOADING AREA. 36" X 12", UNLOADING AREA. 36" X 12", PNUMATIC TRACKING. YES, PNUMATIC BELT TENSION. YES, MOTOR # 1. 20 HORSEPOWER, MOTOR #2. 15 HORSEPOWER, HOURS. 5637.

Timesavers Model 2321-24-01 Sander, 43"x75" Belts, 2-Head, IceClean System on each head.

950M WHEEL LOADER, Air Conditioner, ANTIFREEZE, -34C (-29F), AUTO DIFFERENTIAL, HMU, AUTOLUBE, STD & LOGGER, AXLES, AUTO DIFF F/R, ED, BUCKET-GP, 114" 4.25 YD3, CAB AR, STANDARD, CAB ROOF CAP, COOLING, 6 FINS PER INCH, Counterweight, COUNTERWEIGHT, 1460KG, COVER, HVAC, PLASTIC, CUTTING EDGE, BOLT-ON, Differential ...more

one(1) used Radiant Technology Corp Infared Belt Dryer Model SMD 206 Serial number 1506028709 Belt is 6" wide - 4.5" wide working area 42" center to center length, 48" overall length SIngle phase, 120 voltage Variable speed, power switch, heat range, amps Honeywell Digital Temperature Controller ...more

Loma, Models IQ4 / CW3-1500, Combination metal detector and checkweigher. Rated from 10 to 140 feet per minute with number of product – depending on materials, application and machine configuration. Brushed 304 stainless steel construction. IQ4 Metal detector has working aperture of 4¼" in Height x ...more

MODEL. 30, BELT WIDTH. 6", BELT LENGTH. 48", POSITION. HORIZONTAL OR VERTICAL, DISC DIAMETER. 12", DISC SPEED. 2400 RPM, MOTOR HORSEPOWER. 1-1/2.

37" TIMESAVERS "LYNX 37MWT-DBB-60" THREE-HEAD WET-DRY, ABRASIVE BELT FLAT PART DEBURRING/FINISHING SANDER, New 2013, Serial No 32403, Model 37MWT-DBB-60, Mfgr No 131878MD, Series "Lynx", Drum Head Followed By (2) Brush Heads Configuration, (2) 6" Diameter Adjustable Brush Heads, (1) 6" Diameter Adjustable Contact Drum ...more

A.K. Robbins, Flood style, agitated washing segment. Unit designed to effectively wash sand, dirt and other debris from buoyant products. 48" wide x 150" long x 14" deep wash bin removable bottom screens with ¼" diameter holes, (6) top mounted spray bars, (8) bottom mounted spray bars, (11) ...more

Used 14' L x 24" Wide Flatbelt Conveyor 11" High Side Walls 12" Pully Diameter DOES NOT HAVE GEARBOX OR DRIVE, PREVIOSULY DRIVEN BY HYDRAULIC MOTOR Approximate Dimensions: 16' L x 4' W x 2' H.

, DUAL INFEED AND OUTFEED HOLD DOWN ROLLSQUICK RELEASE OUTBOARD SUPPORT FOR BELT CHANGESMOTORIZED THICKNESS ADJUSTMENTAIR KNIFE PARTS DRYERAUTOMATIC INDEXING PAPER MEDIA FILTER COOLANT SYSTEM“THROUGH BEAM” ABRASIVE BELT TRACKINGPRECENTAGE LOAD METERINFEED STOP BAR6” DIAMETER CONTACT DRUMS, Model: ...more

SKU: 137953, Model: RB-SV 1600, Year: 2015, Condition: Used, S/N: RBSV076, Additional :, Intended Use: The machine is for indoor professional automatic use in the mining. metallurgy and chemical industries. It is for the separation of solids and liquids and to wash and dry solids., Net Filtration Width: 1.6 m, Net ...more

Burr King 2 1/2″ x 60″ Single Speed Two Wheel Belt Grinder, 960-250, Inventory # 6166, Model: 960-250 (Single Speed), SKU: 90100, Made in USA, Burr King’s family of two wheel grinders provides vigorous contact wheel, workrest and platen grinding in a frame design that pivots to ideal work positions. ...more

Used P.E.W.E DeWater Systems belt filter press, model DBP-705, stainless steel feed pan, nominal capacity.5 - 3 cu meters/hour, approximately.5 meter wide belts with.75 hp and 2 hp, 230/460 volt belt motors, pneumatic belt tension adjustments, multiple spray wash bars, doctor knife solids discharge, built 10/2012.

NS MAQUINAS (NEW) MODEL DM 1100 C CROSSBELT, DEBURRING MACHINE, 43" X 2" WORKING CAPACITY, 1 HP CONVEYOR MOTOR, (2) 4 HP SANDING BELT MOTORS, 19"-165"/MIN VARIABLE FEED RATE, 2" X 126" BELT DIMENSIONS, DEBURRS INSIDE AND OUTSIDE CONTOURS OF, STAINLESS STEEL, STEEL AND ALUMINUM PARTS CUT ...more

WIDTH OF BELT. 8", LENGTH OF BELT. 48", AREA OF TABLE. 12" X 8", TABLE TILT FORWARD. 45 DEGREES, FLOOR TO TABLE TOP. 40", MOTOR HORSEPOWER. 2.

Burr King 2″ x 48″ Variable Speed Three Wheel Belt Grinder, 482, Inventory # 6170, Model: 482 (Variable Speed), SKU: 41110, Made in USA, Burr King’s family of three wheel grinders provides maximum versatility. Contact wheel, platen, workrest support, and loose belt grinding are precision controlled ...more

ZUCKERMANN CHALLENGER 1700 37-Z SYNCHRO Copy Lathe. Single spindle hopper feed CNC Copy Lathe for shaping & sanding asymmetrical parts. -- Size Capacity: 67" Maximum 67" (1700mm) and 4" (100mm) minimum working length, 9.8" maximum working diameter. -- Drives/Speeds: The cutter head is belt driven by 5.5 HP motor ...more

Burr King 2″ x 48″ Single Speed Three Wheel Belt Grinder, 482, Inventory # 6169, Model: 482 (Single Speed), SKU: 40100, Made in USA, Burr King’s family of three-wheel grinders provides maximum versatility. Contact wheel, platen, work rest support, and loose belt grinding are precision controlled with ...more

SERIAL. 1747-4037, MODEL. S36X75, WIDTH OF ABRASIVE BELT. 36", WIDTH OF CONVEYOR BELT. 36", LENGTH OF ABRASIVE BELT. 75", CONVEYOR SPEED (VARIABLE). 0 TO 60 FPM, PARTS OPENING. 0" TO 6" MAXIMUM, DIAMETER OF CONTRACT ROLLS. 6", LOADING & LOADING AREA. 18" X 36", PNEUMATIC BELT TENSION. YES, PNEUMATIC BELT TRACKING. ...more

BMI, stainless steel inclined conveyor. a 13" infeed height, 18" wide conveyor belt. Conveyor has a 67" long incline with a 72" long top horizontal run and a 36" discharge height. Powered by a ½ hp motor drive with variable speed and mounted on a (4) leg stainless steel base frame. ...more

Burr King 1 1/2″ x 60″ Three Wheel Variable Speed Belt Grinder, 760, Inventory # 6168, Model: 760 (Variable Speed), SKU: 72110, Made in USA, Burr King’s family of three-wheel grinders provides maximum versatility. Contact wheel, platen, work rest support, and loose belt grinding are precision ...more

Asking Price is for ONE FMH’s MAXXREACH Telescopic CPM Conveyors., Perfect working order, mint condition, in production for only 20 hours! Corp buyout, so these are available. FMH’s MAXXREACH Telescopic CPM Conveyor's MODEL: MR3-23-74-30-A-L-LH Serial 0327246, Max Live Load: up to 4,000 lb total Belt: ...more

*420F2 BHL ST, TIER 4, HRC, *AIR CONDITIONER, T4, *CAB, DELUXE, *COLD WEATHER PACKAGE, 120V HRC, *COUNTERWEIGHT, 1015 LBS, *ENGINE, 74.5KW,C4.4 ACERT, T4F, *HYDRAULICS, MP, 6FCN/8BNK, ST, *PRODUCT LINK, CELLULAR, PL641I, *PT, 4WD, STD SHIFT, *RIDE CONTROL, *SEAT, DELUXE FABRIC, *STICK, EXTENDABLE, 14FT, BEACON ...more

12" wide x 7' long stainless steel sanitary cleated belt food conveyor, Cleated belt size 12" wide x 3/16" thickness x 2-1/2" high, 11" on center, stainless steel sides, infeed and discharge elevation 82" high off the floor, pneumatic belt tensioner and pneumatic motor clutch, with Teco FM50 AC Inverter, 115 volts ...more

Autoweigh Belt Feeder. Model: 302-12''XLC. S/N: 88/2268. Belt width: 12 in. Maximum aperture/clearance: 8 in. W x 5 in. H. Height at conveyor inlet/outlet: 30 in. Infeed hopper dimensions: 20 in. L x 20 in. W x 15-1/2 in. H. AutoWeigh Micro VI Control Panel, S/N: AP1354, panel is touchpad controls and digital ...more

Langen, Model B1-M, Semi automatic, continous motion, servo driven, left to right, horizontal, hand load, hot melt glue cartoner. Rated from 50 to 120 cartons per minute – depending on materials, application, machines configuration and operator dexterity. Carton size range: 1¾ to 7" in Length; ...more

Custom Cut Metal, Model CCMM013886, stainless steel frame conveyor. a 24" wide x 240" long belt with a 34" to 38" infeed / discharge range., OAD: 240" L x 37" W x 35" H.

Thermation Belt Oven (1999), Interior: 4 Ft. Wide x 20 Ft. Long x 4 Ft. H, Gas Fired ( 1.25 MM BTU ) 500 Deg F., 5 H.P. Recirculating Fan, Heavy Duty Rubber Belt, Powered Exhaust, & Variable Speed Belt Drive, Side Mounted Control Panel with Watlow Digital Temperature Controller, Digital High Limit Controller, and ...more

Goff Wire Mesh Belt Shot Blaster with 4-30 HP direct drive blast wheels, 27.5" continous manganese mesh belt, air wash seperator, Dust collector included. Work opening is 31" wideX18" high.

MAKOR 'LP-8' Profile Sander. Feed Trough(8) Sanding stations, 7-7/8" max. width & 3-1/8" thickness cap.; -- (2) triangular belt design sanding heads, independently mounted columns, each with 4 HP motor, -- Variable speed from 100 - 2,750 RPM; approx. tilting range 120. -- Feed Drive: 4 HP Gearbox feed ...more

30’ Long X 38” Wide Hytrol Flatbed Conveyor 2 HP Baldor Motor S/N 548912 10” High Side Walls Does Not Include Starter/Controls Missing Upper Legs, Can Be Fabricated Prior To Shipping Flatbelt – Cannot Be Converted To Cleated Approximate Dimensions: 30' Lx 5' W x 2' H Located In ...more

Dorner 7200 Series belt conveyor system featuring a dual drop-down configuration with 12" wide flat rubber belts. The top conveyor measures 7-1/2' long and stands 76-1/2" high to the belt surface. It includes (2) side discharge gates, each 12" wide x 3" high, dimpled surface flap gates and stainless discharge ...more

AMBEC Stainless Steel Table Top Conveyor Extension w/ Dual Dayton Polishers/Cleaners. 4-1/2 in. Maximum conveyor belt width. Dart Speed Controller. Dayton Polishers: 90V, 1.5 amps. Overall Dimensions: 154 in. L x 36 in. W x 18 in. H.

Dorner, 16" wide x 190" long stainless steel belt conveyor. 16" wide and 190" long food grade belt has an infeed and discharge height of 38". a 0.33 HP drive, variable speed control, (2) 96" long x 9" wide side mounted pack tables. Mounted on locking casters, OAD: 190"L x ...more