Buy or Sell Your Wide Belt Sander

SKU: 151983, Model: LBK 150 ST, Year: 2019, Condition: Used, S/N: V19.080, Horsepower: 9.1 hp, Type: Belt, Electrical :, Voltage: 480 volts, Phase: 3-phase, Made In: ITALY, Dimensions: 78.00 (H) x 40.00 (W) x 87.00 (L) inches, Additional :, Belt motor: 3 kW // 4 hp, Abrasive wheel motor: 1.5 kW // 2 hp, Oscillation ...more

LASM VOLPATO LS-2 NSS Feed Through Top and Bottom Molding Sander with Inverter Controlled BeltsMolding sander with (2) opposing abrasive belt units with Inverter control on both sanding heads. The profile sander comes with an extension table to support large panels. The regulation of the axis and inclination is manual ...more

CEMCO - 1237: Dual Head Wide Belt Sander 2-Head; 36" cap. -- 1st Head. Rubber-covered contact roll; 20 HP motor.2nd Head. Finishing platen; 15HP motor; 37" x 75" abrasive belts with air tensioning. -- Variable speed conveyor feed; 15 - 60 FPM; 0" - 6" thickness cap.; infeed & outfeed rubber-covered pinch rollers. ...more

ITEM 1465: APPROXIMATELY 12” WIDE X 12’ LONG PORTABLE STAINLESS STEEL FRAME INCLINED BELT CONVEYOR WITH DRIVE., HEIGHT FROM FLOOR TO FEED BELT: 11″, DISCHARGE HEIGHT FROM FLOOR: 57″, OVERALL HEIGHT: 59.5″, OVERALL LENGTH: 134″, OUTSIDE WIDTH: 15.25″, USEABLE BELT WIDTH: ...more

VALPATO LBK-150-ST 1 Feed Through Profile SanderTECHNICAL S: An added small needle type drum sander can be fitted with drum sanding aggregates of 25, ­30, ­35,­40, ­45 ­50 mm diameters which can be used for tighter curves and smaller radius sanding requirements. Storage compartments (2 in total) ...more

Here We Have:, 9″ x 60″ Timesavers Model 960-1MW 9″ Metal, Wet Abrasive Sander, Make: Timesavers, Model: 960-1MW, Serial Number: 25237S, New in: 1997, Conveyor & Abrasive Belt Size: 9″ x 60″, Conveyor Feed Speed: 10-33 ft/min, Feed Motor: 1/2 hp, Sanding Opening: 0-3″, Contact ...more

TIMESAVER - 113,.12" Width Single-Head Wide Belt Sander12" Width cap., single drum.: -- 12" Width capacity. -- 7.5 HP Main motor. -- 6" Dia. drum. -- 0 - 8" Opening capacity. -- 0.5 HP Feed motor. -- Complete with: Posi-Trac electronic tracking and a 12" conveyor extension.

TIMESAVER LYNX 37MWT-D-60 37” Metal Wet Belt Sander 2016’ # 7149, TIMESAVER LYNX 37MWT-D-60 37” Metal Wet Belt Sander 2016’ # 7149, Reference # 7149, Model # LYNX 37MWT-D-60, Serial # 33182, Year of manufacture- 2016’, Working width- 36”, Belt width- 37”, Belt length- ...more

SERIAL. 12354, MODEL. 100, DIAMETER. OF DISC. 16, TABLE DIMENSION. 25" X 9-1/2", DISC TABLE TILTS. 12 UP & 45 DOWN, DISC SPEEDS. 3770 RPM, FLOOR TO TABLE. 34-3/4", BELT DIMENSION. 6" X 17-3/4", BELT SPEED. 1800 RPM, MOTOR HORSEPOWER. 3.

Timesavers Model "TOP 30" 30" Belt Grinder/Sander, Belt Size: 30" x 103", Belt Speeds: 15 - 38 FPM, Pass Line: 38", Max Thickness Opening: 2.5", Main Motor Drive: 15 HP, Dust Collection System Torit model 24 FB 7.5 HP 3 phase 230 V 3475 rpm.

CAPACITY:, Belt Width: 53.14", Shortest Work Piece Length: 0.787", Maximum Thickness Work Piece: 3.93", Abrasive Belt Motor: 20 HP, Speed: 1400 RPM, Material Feed: Automatic, Infinitely Variable Feed Speed: 0-157 IPM, Insulation Class: IP 54, Main Drive Motor: (4) x 3 HP, Abrasive Belt for Sanding /Deburring with ...more

, Manufacturer: Cemco, Stock Number: 13856, s:, Powered conveyor, Manual table height adjustment, Belt width - 24”, Belt length - 85”, Table height adjustment - 11”, Main motor - 10 HP / 1750 RPM, Volts - 230/460, Phase - 3, Cycles - 60, Amps - 26.2/13.1, Conveyor motor - 1 HP, Approximate dimensions ...more

Discharge HT 107" Wide Belt 8" Hopper Size 36" x 29" x 22" Deep, Diverter to feed two machines, Caster for easy movement.

Blue Plastic Belting for Cloudy & Britton Spiral Freezer. (1) rolls. Belt width: 36 inches.

4- Head customer built resaw, 6" Wide belt, Hydraulic hold down rollers, 15 HP Motors on each head, Pneumatic tension.

ZINTEXX 5200 Abrasive Blast Media Belt Cleaner for Wide Belt Sanders; -- Utilizes ground glass to clean belts. -- Traverse variable speed D/C drive motor with adjustable limit switches, maximum stroke 60".: -- 30 SCFM @ 52 PSI (max.); 850 liters/minute @ 3.45 bar (42 SCFM); 115 V, 1 Ph., 60 Hz, 20 AMP. -- The cleaner ...more

Houfek Buldog 7-3M-1100-RRC 3 Head wide belt sander43" width cap, Roller / Roller / Combination-headHead Configuration1st Head – Rubber – 90 shore @ 200mm (7.9";) dia.2nd Head – Rubber - 90 shore @ 2000mm (7.9";) dia.3rd Head– Rubber - 45 shore @ 200mm (7.9";) dia. with adjustable platen. -- ...more

Width of Belt 37 inches Working Height 5.875 inches Conveyor Feed Rate 15 & 30 FPM Sanding Belt Size 37" x 60" Power 15 horsepower Electrical 230V / 3PH Approx. Shipping Dimensions 60 L x 64 W x 84 H Approx. Shipping Weight 2500 pounds.

48" x 18' Used Prodeva Rubber Belt Conveyor, 18" High Sides, Slider Bed, 2HP 3/460 Volt Electric Motor (May Require Replacement).

Model ECS-3615, 48" Wide Belt, No Control Panel, 12" Diameter x 36" Wide Eddy Rotor, 3HP Electric Motor (Belt), 15HP Electric Motor (Rotor), 5,000lb Approximate Overall Weight, Erium 3000 Rare Earth Permanent Magnetics, Self Cleaning, Splitter Box, Control Panel Not Included, Approximate Overall Dimensions: 81" Wide x ...more

BÜTFERING SCO 313 QCH Diamond. 3-Head Wide Belt Sander, 1,350 mm (53") working width. Constant pass-line.Perfectly suitable for veneer & solid wood sanding, lacquer sanding, as well as High Gloss.Head configuration: (1) Cross belt sanding head, (1) Combination head consisting of Contact Roller & Finishing ...more

Belt Dimensions: 37” wide x 60” long, Drum head type: standard, Drum Diameter: 6”, Disc brake on main motor, 0-8” opening (38” constant passline), Double infeed & outfeed holdown rolls, 15-45 FPM feed speed A/C (reversing), Lubrication system: Automatic, Air knife dryer with blower ...more

TIMESAVER 2111-13-0 37” Metal Wet Sander 2007’ Stainless # 7688, TIMESAVER 2111-13-0 37” Metal Wet Sander 2007’ Stainless # 7688, Reference # 7688, Model # 2111-13-0, Serial # 30575, Year of manufacture- 2007’, Working width- 36”, Belt width- 37”, Belt length- 60”, Feed ...more

36” GRINDINGMASTER MCSB/B2-900 (3) Head Timesaver Sander, Reference #6613, Model # MCSB/B2-900, Serial # TS1376-04, Working width- 36”, Belt width- 36”, Belt length- 60”, Conveyor width- 36”, Feed belt speeds- 15 – 65 F.P.M., Material thickness- 0 – 5”, Head (1)- Belt ...more

Used chain belt conveyor, carbon steel frame, approximately 15" wide x 148" long chain belt, with cleated belt conveyor, 16" wide x 60" long, adjustable angle, approximately 1 hp motor drive driving both conveyors.

WILTON COMBINATION BELT & DISC SANDER, TABLE SIZE, DISC 12" X 16 3/8", BELT 7 3/8" X 14 3/4", TABLE TILT (BOTH) 45DEGREE DOWN 20 DEGREE UP, DISC DIAMETER DISC SPEED PLATEN SIZE 12" 1960 RPM 6 1/4" X 14 3/4", BELT SIZE BELT SPEED DIMENSIONS (DEPTH, W, H) DIMENSIONS 6" X48" 2850 SFM, DIMENSIONS W/PLATEN HORIZONTAL ...more

Complete line consists of product and press former with teflon product feed hopper and (3) 48" wide teflon product forming rollers that create a workable slab designed to reduce loss and improve final product and eliminates the need for any other equipment, such as water chillers, when handling sticky or tacky ...more

Used Orthman 16" Wide x 51'-4" Long Cleated Flex-wall Industrial Belt Conveyor, Heavy-duty slider bed conveyor with bottom return rollers., 2"H vulcanized cleats spaced at 18" and flex-walls., Belt is a 1/2" thick reinforced neoprene rubber, with 11" width between flex-walls and a 24" ...more

Used 23"W X 9'-6"L Stainless Steel Sanitary Cleated incline Belt Conveyor, All stainless steel, portable support frame, 22.3" wide vinyl belt with 2.5" cleats spaced at 8" (mild steel belt lacing), Slider-bed frame is 24" wide X 10' long, 1/2HP gearmotor with chain drive, Electrical ...more

Arpac Model 10828, Automatic, right angle, shrink bundler rated 10 to 20 bundles per minute – depending on materials, application and machine configuration. 10" wide x 60" long stainless steel powered roller infeed conveyor, product pusher, 29" wide seal jaw with 12" of vertical travel, top ...more

OAKLEY H-5 Double Sided Edge Sander. -- : With 7.5 HP -1,800 RPM TEFC motor; (2) 8-1/2" x 57-1/2" Cast Iron platens; 8" x 164" abrasive belt, 4,680 FPM belt speed. -- : One 11" x 62" Cast iron side table on one side and (1) 19" x 64" cast table on the other side, (1) cast iron radius tilting end table, end table tilts ...more

Northtech Model NT 10-1100PC 41" Planer Sander Working Width: 41" Planing Heads: (1) 7" (6) row helical 30 x 12 insert cutterhead Sanding Heads: (1) - (1) Heavy duty 6" combination head, 65 durometer with 3.4" felt Sanding Belt Length: 103" Main Spindle Motor: 40HP/30HP Feed Motor: 5HP with Inverter Table Movement ...more

MODEL. 12354F, WIDTH OF BELT GRINDER. 6", WORK REST TABLE ON BELT GRINDER. 14-3/4" X 7-1/2", BELT GRINDER TILTS AWAY FORM BELT. 45 DEGREE, BELT GRINDER TABLE TILTS TOWARD BELT. 20 DEGREE, DIAMETER OF DISC. 12", WORK REST TABLE ON DISC GRINDER. 16-1/4" X 7", DISC GRINDER TABLE TILTS, EITHER WAY. 45 DEGREE, BUILT IN ...more

6 head - 2 top, 2 bottom, 2 side heads., Side heads rotate and tilt, Side heads are at outfeed end, both mounted to sand the bottom of parts, 12" Long outfeed table, placed after bottom sanders, Motors are 1 h.p., Voltage is 208-240, 3 phase, 15 " conveyor, Adjustable solid top table, placed above bottom sanders to ...more

I &H Blancher Belt - 3 pass. Flighted plastic conveyor belt, 36 in. wide with 4 in. flights on 12 in. centers. Variable speed. Live steam injection. Construction Stainless Steel and other non-corrosive materials. Top center feed with side discharge. Overall size: 70 in. W (plus controls) x 101 in. H x 192 in. L. ...more

TIMESAVERS 4221-45-00 52” Dual Head Metal Wide Belt Sander (2) 75 H.P., TIMESAVERS 4221-45-00 52” Dual Head Metal Wide Belt Sander (2) 75 H.P., Reference #6731, Model # 4221-45-00, Serial # 31360T, Year of manufacture- 2008’, Conveyor belt width- 52”, Belt size- 52” x 103”, Conveyor ...more

PROGRESS PMC 312-6 STROKE SANDER10' x 30" Sliding table (on ball bearing steel rollers), manually operated stroker pad travels on ball bearings; motorized raise/lower of table for up to 24" vertical opening, 7.5 HP - 1,750 RPM TEFC main motor, 10" dia. pulley x 6-1/4" face, drive pulley rubber covered, 6" wide x ...more

Make: Kingstone, Model: Robotic Belt Grinder, Year: 2022, Machine Location: Upon Request, Grinding Heads, Type: Dual Floating Belt Grinding Heads, Quantity: 2, Configuration: Symmetrical, Abrasive Belts, Belt Length: 70.9″, Belt Configuration: 4 Belts, Grit: Configurable, Drive, Motor Power: 3HP, Drive Type: ...more

DMC UNISAND K 1100 Wide belt sander4-Head, 43" (1,100 mm) max. width cap. Head sequence: (3) Contact rolls and (1) Combi with roller and segmented platen.Heads configuration: -- 1st Head: Helical grooved steel contact roll, 10" dia., 48 HP motor. -- 2nd Head: Helically grooved rubber covered contact roll, 12-1/2" dia. ...more

Double Stainless Steel Conveyor. Belt #1 dimensions: 28 in. L x 30 in. W. Belt #2 dimensions: 101 in. L x 30 in. W. Product clearance above belts: 3- in. Overall dimensions: 63 in. L x 48 in. W x 40 in. H.

MODEL: 137-1HDM, Belt Size: 37" x 60" Conveyor Size: 37" Work Height (Adjustable): 0" - 8" Conveyor Speed (Variable): 15 - 45 FPM Contact Wheel Size: 6" Coolant Capacity: 20 Gallons, MOTOR CAPACITY: 20 HP 2 used belts and 4 new belts included. 71"x45"x68-1/4" footprint. 2600 lbs., Machine Type.Grinders, Belt (Incl ...more

COSTA - KK CC-CCC 1350,.5-Head Top & Bottom Wide Belt Sander.53" Width capacity; (2) Bottom drums, (3) Top drums.Bottom Machine: -- Constant pass line height: 1,000 mm (39"). -- Motorized infeed conveyor. -- Motorized infeed pressure rollers. -- Sectioned infeed pressure beam.1st Head: -- Rubber covered cylinder ...more

EMC FLEXY 1350 2RP Finishing Sander with (2) Sanding Heads, Roller and Segmented Finishing PadUseful working width 1,350 mm (53"). Working thickness min./max. 3 - 180 mm (1/8" - 7-1/16"). Head configuration:1st Head: Roller "R" Belt dimensions: 2,620 x 1,370 mm (103" x 54"). -- Roller diameter: 250 mm (10"). -- Roller ...more

VECOPLAN SINGLE SHAFT SHREDDER, MODEL RG 52/150 SPK FF, 51" WIDE X 15" DIAMETER ROTOR, 150 HP 460 VOLT MAID DRIVE MOTOR, HORIZONTAL HYDRAULIC RAM FEEDER WITH PUMP, EXTRERNAL CONTROL PANEL, CLEATED BELT FEED CONVEYOR, CHAMBER LENGTH 51", CHAMBER WIDTH 48", BELT DRIVEN, STUFER INCLUDED, MANUALS, MANUFACTURED IN 2005 ...more

SANDINGMASTER - CSB2-900: Wide Belt Sander, (2) Heads36" Width cap. and Drum & Platen.Head Configuration -- 1st Head: 6" Dia. rubber-covered contact roll; 24 HP motor. -- 2nd Head: Finishing platen: 18 HP Motor. -- 37" x 75" Abrasive belt with: Electronic tracking. -- 1.5 HP Feed motor with: 23 & 46 FPM. -- ...more

NJM / Beltorque Model BT-IC Inline, stainless steel, belt style cap tightener, with cap feeder rated from 30 to 300 containers per minute – depending on material and application. Cap size range: 0.9" to 4-3/4" OD, Container size range: 0.5" to 7" OD and container height range: 2" to ...more

Model: L10W24, Belt Length Ft: 10, Belt Width In: 24, Voltage: 110/1/60.

HYTROL 18" W X 16" L BELT CONVEYOR, STOCK# 14323J, WIDTH 18" W, LENGTH 16', BELT HEIGHT 42".