Buy or Sell Your Vertical Lathe

Serial Number 514-0046-98, Table Diameter 72" Maximum Turning Diameter 84" Maximum Height Under Cross Rail 96" Ram Stroke, Z-Axis 62" Vertical Travel of Cross Rail 54" Ram Travel, Left of Center 54.5" Ram Travel, Right of Center 48.5" Ram Cross Section 7.875" Table Speeds, Inf. Variable 2 Ranges Table Speeds, High ...more

STOCK NO. 9605, 36" WEBSTER & BENNETT VERTICAL TURRET LATHE MODEL M, Serial No. 3189-12 New 1967, Table Diameter 36″, Maximum Swing 46″, Maximum Diameter Turned With Turret 37″, Maximum Height Under Face of Turret 37″, Height Under Cross Rail w/Adjustable Stop Bar 27 1/2″, Vertical ...more

“Normal wear from use, always well maintained, ready to work!”, HARDINGE Model HC CF Precison CHUCKER, LATHE, Between centers: 13″, Chuck 5 in. 3 jaw., Includes collets yes, Only $4,499.00 USD! Sold as is, shipping not included., Loaded free, warehouse, Montreal, Call us today for any questions you ...more

2012 PHOENIX VTC-144/160, Table Dia. 144", Max Swing (on bed). 160", Max Height Under Rail. 42", Power. 130 hp, RPM. 100 RPM, Control. CNC (Fanuc 18i), (2) Rams, Each w/ 12 Position Tool Changer, Chip Conveyor.

MANUFACTURER.: GIDDINGS & LEWIS, MODEL.: VTC 3000 [CNC], YEAR.: 2009, TABLE TYPE.: ROHM, TABLE OUTER DIAMETER.: 118.11", MAX. RING OUTER DIAMETER.: 137.8", TABLE BEARING SYSTEM.: HD TAPER ROLLER THRUST, TABLE LOAD CAPACITY.: 132,277 LBS., LOW TABLE RPM RANGE.: 1–37, HIGH TABLE RPM RANGE.: 1–120 ...more

This listing is for a NEW Hardinge LS200DBR12T CNC lathe turret with BMT45 mounting, model A2L071. The turret provides automatic indexing of twelve tool stations and is designed for rigid, repeatable tool positioning in CNC turning applications. BMT45 mounting allows direct integration of driven and static tooling on ...more

STOCK 9990, 46" BULLARD "DYNATROL" HI-COLUMN VERTICAL TURRET LATHE, Serial No. 32949 New 1975, Capacity: Swing With Side Head Above Table 49", Swing With Side Head Below Table 58", Height Under Cross Rail 64", Height Under Turret Face 74-3/8", Vertical Travel of Turret Head 26" ...more

Spec Sheet:, Aloris CXA 42 Lathe Tool Post Boring Bar Holder, USED, Brand: Aloris, Part Number: CXA 42, Wedge: 2-1/4, Holder Type: Boring Bar Holder, Lathe Swing (Inch) 13 to 18, Through Coolant No, Overall Height 2 in, Width: 2-1/4, Overall Length (Inch) 3-3/4, Boring Bar Size: 1in.

Chuck Diameter: 46", Max. Swing with Side Head in Position: 49", Max. Swing with Side Head Below Table: 58", Chuck Speeds: 20 from 9 to 313 RPM, Feed Range: Variable 0.001 to 250 IPR, Max. Height Under Cross Rail: 40", Max. Height Under Turret Head: 36", Vertical Side Head Travel: 38.75", Horizontal Side Head Travel: ...more

Experience superior performance with this New O-M NEO-16EXII (Alpha Series with Live Spindle) VTL. This model boasts a table diameter of 62.99", a swing of 78.74", and work height of 59.06". a 50 hp main motor and a 25 hp spindle motor supporting speeds of up to 300 RPM and 2,500 RPM respectively. It can handle a ...more

Discover the efficiency and quality of operation with the O-M NEO-20EX (Alpha Series with Live Spindle). This VTL model, manufactured by O-M boasts impressive. It has a table diameter of 78.74, swing of 98.43, and working height of 78.74". Run by a robust 50hp main motor, the table speed can reach 230 RPM. Its spindle ...more

63" Froriep 4-Axis CNC Vertical Boring Mill w/ Ram and Turret Head, 63" Table, face plate type chuck, 71" swing, Fanuc 18TT CNC, 50 HP Drive, Retrofit 2006, 63"x71" Froriep Model KE-Super KE16 63" Turret Lathe, 4-AXis CNC Retrofit 2006, Diameter of Chuck: 63" (1,600.2 mm), Max Swing: 71" (1,803.4 mm), Height Under ...more

G&L 8000 CNC Controls, #60 Tooling, Chip Conveyor, 12 Station ATC, Renishaw Probe, Table Jaws, Elevating Rail, Table Dia 96" 2,438.4 mm Swing 108" 2,743.2 mm Work Ht-U/R 90" 2,286 mm RPM 200 RPM 200 RPM Make: Giddings & Lewis, Model: 84VTC, Table Diameter. 96″, Swing. 108″, Table ...more

Table Diameter, T-Slotted: 108", Maximum Swing: 120", Maximum Height Under Cross Rail: 84", Ram Stroke, 12" Extended Travel: 62", Ram Taper: #60 ANSI, Ram Cross Section: 7.875" x 7.875", Side Head Horizontal Ram Travel: 32", Side Head Ram Taper: #50 ANSI, Side Head Ram Cross Section: 7.25" x 8.50", Table Speeds ...more

MANUFACTURE MOTCH & MERRYWEATHER MODEL NUMBER 225D CHUCKS 18" 3- JAW HYDRAULIC HORSEPOWER 50 HP SPINDLE SPEEDS 5 TO 867 RPM AXIS TRAVEL Z - 18”, X - 20” TURRETS 2 INDEPENDENT 6 STATION TURRETS CONTROL FANUC AXIS DRIVES FANUC SWING 35”, FULL ENCLOSURE, 2- FANUC CNC CONTROLS, CHIP CONVEYOR, COOLANT ...more

MODEL.: PMNX-1600, MAX TURNING DIAMETER.: 39.370", MAX SWING OVER BED.: 42", MAX CUTTING LENGTH.: 62", SPINDLE BORE.: 12.500", SPINDLE MOTOR.: 60 HP, SPINDLE SPEED.: 500, CHUCK SIZE.: 48", X AXIS TRAVEL.: 22.50", Z AXIS TRAVEL.: 44.88", JORGENSEN CHIP CONVEYOR, Machine Type.Lathes, Chucking, Cnc Manufacturer.MAZAK ...more

A.7.5", B.0.670", C.2.485", D.2.795", E.4.595", F.N/A, G.1.569, ID of notches.6", Has 2 slots for lathe dog tooling, Overview, Type:TOOLING & ACCESS._See also Specific CategoriesStock #:13149Status:For Sale.

Max. Swing: 63"Max. Workpiece Height: 43.3"X-Travel: 80.7"Z-Travel: 31.5"ZB-Travel 19.7"C-Axis Increments:.001°Under Rail: 51.2"Max. Spindle Speed Table: 400 RPMTable Diameter: 53.1"Spindle Taper: Capto C8 TaperMax. Live Tooling Spindle Speed: 3000 RPMTool Changer: 24-ATCMain Motor: 50 HPTable Load Capacity: 17600 ...more

and Equipment, Max. Turning Diameter: 63", Machining Height: 47", X Axis Travel: 40", Z Axis Travel: 31", W Axis Travel: 33", Work Piece Weight (max): 11,000 lbs, Speed Range:: 5 - 200 RPM, Rapid Feeds: 236 IPM, Main Motor Drive: 60 HP, Siemens 828 D SL CNC.

2018 HAAS CL-1 CNC Chucking Lathe #7829, Swing: 11", Machining Length: 12", # Axis: 2, Collet Chuck, Bar Capacity: 1", Main Motor: 5 HP, Max RPM: 6,000 RPM, Turning Dia: 5", Present Electrics: 220V/3/60, Haas CNC Control, Rigid Tapping, Parts Catcher, Spindle Orientation, Bar Feeder, Internal Work Light.

Youji VTL1000ATC VTL, CAPACITY:, TABLE DIAMETER 39.37″, MAXIMUM SWING 53.14″, MAXIMUM CUTTING DIAMETER 43.30″, MAXIMUM CUTTING HEIGHT 35.43″, RAIL TRAVEL 20″, RAM STROKE, Z-AXIS 31.49″, TABLE WEIGHT CAPACITY 8,800 LBS, TABLE SPEED, 2-RANGES 1-600 RPM, CUTTING FEED RATE 0.39-78.7 ...more

Spec Sheet:, Shars 250-301 Quick Change Tool Post Holder, USED, Brand: Shars, Model Number: 250-301, Part Type: CXA 1, Quick Change Tool Post Holder, Tool Capacity Range (Inch): 1/2" to 3/4, Lathe Swing: 13-18in, Measured Dimensions of Holder:, Wedge: 2-1/8, Length: 3-1/4, Width: 1-3/8, Height: 2-1/8 (not counting ...more

STOCK NO. ET-5100, Giddings & Lewis Model 84VTC 96″ 2-Axis CNC Vertical Boring Mill, New: 2001, Make: Giddings & Lewis, Model: 84VTC, Table Diameter: 96″, Swing: 108″, Table speeds up to 200 RPM, Elevating Rail, Max under the rail: 90″, Ram Stroke: 57″, Ram Size: 8″ X ...more

STAR SV-38R Type B Swiss Type CNC Lathe w/B AXIS! (used) New 2018 - LOADED, low hours, ran oil. See. Heavily discounted., STAR SV-38R Type B CNC Swiss Type Automatic Lathe with, Fanuc Series 31i-B5 Controller and Standard Accessories, SV-38R Type B STANDARD ACCESSORIES:, CNC Unit (Fanuc series 31i-B5) Stand-alone type ...more

Maximum Swing Over Bed: 39.37", Maximum Turning Diameter: 33.46", Maximum Turning Length: 33.46", X-Axis Travel: 18.50", Z-Axis Travel: 33.46", Spindle Speed: 5-1800 RPM, Spindle Nose: A2-11, Spindle Motor: 40 HP, Turret Positions: 12, Live Tooling Speed: 4000 RPM, Electrics: 220/3/60, Floor Space Required: 121" x ...more

Table diameter: 168″ (14’), Maximum Swing: 180″ (15’), Height under a 10″ tall tool: 120″ (10’), Diameter of bore both rams will enter: 40″, Table capacity: 75 Tons, Maximum table speed: 50 RPM, Rams: 2, Ram stroke: 80″, Ram cross section: 11.3″ X ...more

Table Diameter: 55.11", Maximum Swing: 62.99", Maximum Part Height: 47.24", Ram Cross Section: 9.44" x 9.44", Ram Stroke: 35.4", Table Speed, 2-Ranges: 1-360 RPM, Table Motor: 60 HP/50 HP, Table Weight Capacity: 17,600 Lbs, Milling Spindle Taper: BT 50, Milling Spindle Speeds, Max: 1500 RPM, Milling Spindle Motor: 20 ...more

MOTCH 135, Manufacturer: Motch, Model No.: 135, Chuck: 30” 3-Jaw, Horsepower: 50 HP, Distance Under Turret: 40” / 16”, Overall Machine Height: 150" (12'-6") approx., Axis Travels: Z = 24”, X = 28”, Turret: (1) 6 Station Turret, Control: Fanuc CNC, Axis Drives: Fanuc AC, Swing: 46” ...more

Maximum Swing Over Bed Ways: 42” Maximum Turning Diameter: 39.37” Distance, Turret to Spindle Face: 62.99” Turret Positions: 8 X-Axis travel: 22.5” Z-Axis Travel: 44.88” Spindle Hole: 14-1/2” Spindle Speeds: Approx. to 500 RPM Main Motor: 30/45 KVA Under power : Mazak Fusion 640T ...more

108" CHUCK, MAX. SWING 122", 5 POSTION TURRET, 84" UNDER RAIL, 2.7-100 RPM, SIDE HEAD, 100 HP DRIVE.

Spec Sheet:, Aloris CXA 4 Lathe Tool Post Boring Bar Holder, USED, Brand: Aloris, Part Number: CXA 4, Tool Holder, Wedge: 2-1/4, Tool Post Holder Type Boring Bar Holder, Lathe Swing (Inch) 13 to 18, Through Coolant No, Overall Height (Inch) 2, Overall Height 2 in, Overall Length (Inch) 3-1/2, Boring Bar Size w/o ...more

MANUFACTURER Giddings & Lewis MODEL NUMBER 512-VBM YEAR OF MANUFACTURE 2025 4 JAW MANUAL CHUCK 48” MAX TURNING DIAMETER 60” HEIGHT UNDER TOOL 49” (OPTIONAL PLUS 12” / 24”) SPINDLE MOTOR 75 HP AC VARIABLE SPEED SPINDLE SPEEDS 15-350 RPM NUMBER OF TOOLS 12 STATIONS PROGRAMABLE AXIS X ...more

5-AXIS MACHINING CENTERS DECKEL MAHO DMU 50 eVo linear SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION: Used 2007 DMG MORI DECKEL MAHO DMU 50 eVo linear 5-Axis Simultaneous VMC: Made was made at DECKEL MAHO Seebach GmbH in Seebach, Germany -CONTROL- Heidenhain iTNC530 CNC ...more

5-AXIS MACHINING CENTERS DECKEL MAHO DMU60 monoBLOCK SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION: Used 2006 DMG MORI DECKEL MAHO DMU60monoBLOCK 5-Axis simultaneous VMC: Machine was manufactured at DECKEL MAHO Pfronten GmbH-Pfronten, Germany May be inspected under power ...more

HAAS ST40 CNC CHUCKER Lathe, Chuck Size 15.0″, Max Part Swing 35.5″, Max Cutting Diameter (with BOT turret) 30.00″, Max Cutting Length (varies with workholding) 44.0″, Bar Capacity 4.00″, X Axis 20.00″, Z Axis 44.00″, Rapids on X 710 ipm, Rapids on Z 710 ipm, Spindle Nose ...more

Spec Sheet:, Aloris CXA 4 Lathe Tool Post Boring Bar Holder, USED, Brand: Aloris, Part Number: CXA 4, Tool Holder, Wedge: 2-1/4, Tool Post Holder Type Boring Bar Holder, Lathe Swing (Inch) 13 to 18, Through Coolant No, Overall Height 2 in, Overall Length (Inch) 3-1/2, Boring Bar Size w/o Bushing (Inch) 1, Boring Bar ...more

2022 DN SOLUTIONS PUMA V8300R: 24" table diameter, 50 hp motor, FANUC I Series CNC, 12-station turret, and EZ Guide CNC. Precise and efficient with only 355 cutting hours. Comes with hydraulic chuck and chip conveyor., able Diameter - 24", Swing Diameter - 36.2", Turning Height - 29.5", Spindle Nose - A2 - 11, Table ...more

2018 Momentum MVL-16M CNC VTC with live tooling, 63" Table, 71" Swing, 50" Height, 60 HP, 315 RPM, 24 ATC, 2018 MOMENTUM MVL-16M, Table Dia. 63", Swing. 70.9", Work Ht-U/R. 49.21", Power. 60 hp, RPM. 315 RPM, Control. CNC, Dimensions. 173 x 161 x 210 in, Weight. 44000 lbs.

THE ALLEN-BRADLEY 1498-RT20-600P IS A FLOOR-MOUNTED MOTOR CONTROL CENTER DESIGNED FOR DISTRIBUTION AND CONTROL OF ELECTRICAL POWER IN INDUSTRIAL APPLICATIONS, RATED AT 600 AMPS AND 600 VOLTS. THE UNIT S A VERTICAL ENCLOSED CABINET CONFIGURATION WITH MULTIPLE COMPARTMENTS, FRONT-ACCESS DOORS WITH LATCHED HANDLES, AND ...more