Buy or Sell Your Vertical Lathe
Recommended Categories for vertical lathe
AI-ranked results for vertical lathe - closest matches first
DMG, Mori Deckel Maho #DMU-60-monoBLOCK, 24 automatic tool changer, 28.7" X, 22" Y, 22" Z, 2006
Franke CNC, LLC | Germantown, WI
Category: Vertical CNC Machining Centers
Seller: Franke CNC, LLC
Location: Germantown, WI
Mfr: Dmg
Model: DMU-60-MONOBLOCK
Year: 2006
5-AXIS MACHINING CENTERS DECKEL MAHO DMU60 monoBLOCK SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION: Used 2006 DMG MORI DECKEL MAHO DMU60monoBLOCK 5-Axis simultaneous VMC: Machine was manufactured at DECKEL MAHO Pfronten GmbH-Pfronten, Germany May be inspected under power ...more
36" 4-Jaw lathe chuck
G-2000 | Toledo, OH
Category: Lathe Chucks
Seller: G-2000
Location: Toledo, OH
DIAMATER.: 36", # OF JAWS.: 4, # OF T-SLOTS.: 4, MOUNTING TYPE.: THREADED, # OF MOUNTING BOLTS.: 8, THRU HOLE SIZE.:, Machine Type.Chucks Manufacturer.N/A Model.N/A Year.N/A Condition.Used.
3000 gallon Stainless Steel tank, 96" dia. x 94" straight side, flat top, dish bottom
Perry Videx LLC | Hainesport, NJ
Category: Stainless Steel Tanks and Vessels
Seller: Perry Videx LLC
Location: Hainesport, NJ
Used Approximately 3,000 Gallon Stainless Steel Tank, Capacity: 3,000 gallons, Dimensions: 96" dia. x 94" straight side, Flat top, dish bottom, Side bottom manway, Center bottom discharge, Mounted on (4) legs, _UNKNOWN_ 3,000 GALLON, Capacity. 3,000 gal, Diameter. 8', Height. 7.83', Type of stainless. ...more
8.25" Cushman #1010408000D/6-E, 3-jaw lathe chuck
Machinery Central | Louisville, KY
Category: Lathe Chucks
Seller: Machinery Central
Location: Louisville, KY
Mfr: Cushman
Model: 1010408000D/6-E
, Cushman 1010408000D/6-E lathe chuck with 8.25-inch overall diameter, 3 jaws, 2.5-inch center hole, and 3-inch thickness. Ideal for tooling and accessories in machinist applications. Used condition, model 6E., Spec Sheet:, Cushman 1010408000D/6-E - 8.25in - 3 Jaw Lathe Chuck, USED, Brand: Cushman, Model Number: ...more
8" - 3 Jaw Buck Lathe Chuck 2083R - D1-6
Machinery Central | Louisville, KY
Category: Lathe Chucks
Seller: Machinery Central
Location: Louisville, KY
Mfr: Buck
Spec Sheet:, 8 3 Jaw Buck Lathe Chuck 2083R D1-6, USED, Brand: Buck, Part Number: 2083R, Lathe Chuck, MEASUREMENTS/APPROX., Overall Diameter: 8, Bore/Hub Diameter: 2.25in, Jaws: 3, D1-6 Lathe Chuck Back Plate, Pins: 6,.875 each, Chuck Key included!.
18" x 20" Hyd-Mech #V-18, Tilt Frame Vertical Bandsaw, 19" wheel diameter, 385 FPM, 5 HP
Sterling Machinery Exchange | South El Monte, CA
Category: Vertical Band Saws
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Hyd-Mech
Model: V-18
Horizontal 18" Vertical 20" Wheel Diameter 19" Max. Workload Capacity 6,000 LBS. Capacity @ 45 Degrees 13" Mitering Capacity 45 Degrees Left Or Right Blade Speed (Variable) 65 - 385 FPM Head Feed Rate (variable) 0 - 12 IPM Hydraulic Pump 6-1/2 GPM Coolant Pump 3-1/2 GPM Table Height 38" Feed Rate Hydraulic Variable ...more
400 HP 1787 RPM U.S. Motors, Frame 5808PH, TEFC, HT, 1.15 service factor, 2300/4160 Volts
Pump & Motor Works | Okmulgee, OK
Category: Vertical Pump Motors
Seller: Pump & Motor Works
Location: Okmulgee, OK
Mfr: U.S. Motors
Frame: 5808PH
600 gallon 304 Stainless Steel tank, dished top, flat bottom
Perry Videx LLC | Hainesport, NJ
Category: Stainless Steel Tanks and Vessels
Seller: Perry Videx LLC
Location: Hainesport, NJ
Year: 1991
Used Approximately 290 Gallon Stainless Steel Tank, Capacity: 290 gallons, Material of construction: 304 stainless steel, Dished top, dished bottom, Portable tote, _UNKNOWN_ 290 GALLON, Capacity. 290 gal, Type of stainless. 304, Type Of Heads. Dished, Vertical/Horizontal. Vertical.
40 Amp. S & C Electric Co, SMD-2C fuses & SMD fuse ends, vert offset style mounting, new in boxes
Veracity Asset Services Inc | Uxbridge, ON
Category: Power Line Fuses
Seller: Veracity Asset Services Inc
Location: Uxbridge, ON
Mfr: S&c Electric Co
Model: SMD2C FUSES & SMD FUSE ENDS
Year: 2011
46kv 40A SMD-2C fuses are new in boxes and came from a cancelled project. Compare new at $2800CADThe SMD Fuse ends came from the same project.3032R1 - Vertical-Offset style mounting: S&C 34.5-138kV SMD END FITTINGSVertical-offset style mountingMfg Voltage: ...more
Cam-Wood #VPS-PL, Vertical Panel Saw, 196.5" cutting length, 7800 RPM, Scoring & Panel Lifting Clamps, 230 V., 60 Hz, 3-Ph., Brand New
Ex-Factory | Charlotte, NC
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: VPS-PL
Year: 2026
CAM-WOOD VPS PL w/Scoring & Panel Lifting Clamps (82-1/2" x 196-1/2" w/Scoring)s: -- Panel Clamps for bottom cuts; top to Bottom cutting height is 82-1/2" (2,100 mm) without scoring and 78-3/4 (2,000 mm) with scoring; saw head w/motor rotates 90 for rip or crosscutting. -- Cutting length "rip cut from left/right" ...more
Milacron, M-5X-25, servo robot, 2016
Aaron Equipment Co | Schaumburg, IL
Category: Industrial Robots
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Milacron
Model: M-5X-25
Year: 2016
unused milacron m-5x-25 servo robot; 120-450 ton; 1500 - 6000mm horizontal stroke; 1200mm vertical stroke; 700mm demold stroke- traverse layout; maximum load 10 kg; visual 3 controls. built 2016, but never put into production.
S & C Electric Co, SMD-2C fuses & SMD fuse ends, 46 KV, new in boxes, 2011
Veracity Asset Services Inc | Uxbridge, ON
Category: High and Medium Voltage Fuses
Seller: Veracity Asset Services Inc
Location: Uxbridge, ON
Mfr: S&c Electric Co
Year: 2011
46kv 40A SMD-2C fuses are new in boxes and came from a cancelled project. Compare new at $2800CADThe SMD Fuse ends came from the same project.3032R1 - Vertical-Offset style mounting: S&C 34.5-138kV SMD END FITTINGSVertical-offset style mountingMfg Voltage: ...more
Webb #Champ-4VH, Vertical Mill, Prototrak KMX Control, 36" x 16" x 16" travel, 24" ram, 60-4200 RPM, 3 HP, 220/440 V., automatic lube
Wheeler Machinery Sales | Pomona, CA
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Webb
Model: CHAMP-4VH
Webb Champ 4VH Vertical Mill w/ Prototrak KMX Control #8092 #1, Table size (3) t-slots: 10" x 50", Travels:, Longitudinal (X): 36", Cross (Y): 16", Vertical (Z) (knee): 16", Ram: 24", Quill: 5", Spindle:, Spindle speeds (2 ranges) (varible): 60 - 4200 RPM, Spindle feeds (3):.0015,.003,.006 IPM, Spindle taper: 30 ...more
Blanchard #32-48, vertical spindle rotary surface grinder, 48" dia magnetic chuck
Mohawk Machinery Inc | Cincinnati, OH
Seller: Mohawk Machinery Inc
Location: CINCINNATI, OH
Mfr: Blanchard
Model: 32-48
48/60" BLANCHARD VERTICAL-SPINDLE ROTARY SURFACE GRINDER, Serial No 9802, Model 32-48, 48/60" BLANCHARD VERTICAL-SPINDLE ROTARY SURFACE GRINDER, Serial No 9802, Model 32-48, Updated 48" Diameter Magnetic Chuck, w/Magna-Flux Controller Variable Neutrofier, 32" Segmented Grinding Wheel, 60 HP Spindle Motor - 16" ...more
Lathe Components, tailstocks, compounds, taper attachments, lathe beds, headstocks, saddles, chucks, faceplates, steady rests, follower rests
Yancey Machine Tool Co | Portland, OR
Category: Engine Lathes
Seller: Yancey Machine Tool Co
Location: Portland, OR
Induma #4SA, ram type vertical mill, 11" x58" table, 4 HP, #30 taper, #73329
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Induma
Model: 4SA
SERIAL. 870170, MODEL. 4SA, AREA OF TABLE. 58" X 11", SPINDLE SPEEDS. 80 TO 3600 RPM (VARIABLE), POWER LONGITUDINAL FEED. 3/4 TO 24 IPM, POWER CROSS FEED. 3/4 TO 24 IPM, LONGITUDINAL TRAVEL. 36", CROSS TRAVEL. 15", VERTICAL TRAVEL OF KNEE (POWERED). 16", QUILL TRAVEL. 5", QUILL FEEDS. 001 005 & 015 IPR, HORIZONTAL ...more
19" x 78" LeBlond #Regal, Engine Lathe, 19-1/2" Swing, 1600 RPM, 12" 6-Jaw Chuck, 10 HP, 1980
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
Year: 1980
SERIAL. 12E-128, MODEL. REGAL, YEAR NEW. 1980, SWING OVER WAYS. 19-1/2", SWING OVER CROSS SLIDE. 12-1/4", DISTANCE BETWEEN CENTERS. 78", SPINDLE SPEEDS. (12) 40 TO 1600 RPM, FEEDS. (48).0018 TO.104 IPR, THREADS (INCH). 2 TO 112 TPI, THREADS (METRIC).25 TO 14 MM PITCH, DIAMETER OF SPINDLE HOLE. 3-1/16, CHUCK. 12" 6 ...more
15" x 54" LeBlond #Regal-Makino, engine lathe, 9-1/2" swing over cross slide, inch/metric threads, 4-jaw 12" chuck, 7.5 HP, 1991
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL-MAKINO
Year: 1991
SERIAL NUMBER. 15C-1108MODEL. REGAL MAKINOYEAR NEW. 1991SWING OVER WAYS. 15"SWING OVER CROSS SLIDE. 9-1/2"DISTANCE BETWEEN CENTERS. 54"SPINDLE SPEEDS. (12) 45 TO 1800 RPMFEEDS. (48) 0.0018 TO 0.104 IPRTHREADS (INCH). 2 TO 112 TPITHREADS (METRIC). 0.25 TO 14 MM PITCHTAPER ATTACHMENT. YESSPINDLE BORE DIAMETER. ...more
Bridgeport Step Pulley vertical knee mill, 9" x42"table, 1 HP, 2-Axis DRC digital read out, power feed on X
Vander Ziel Machinery Sales | Alto, MI
Seller: Vander Ziel Machinery Sales
Location: Alto, MI
Mfr: Bridgeport
Bridgeport Step Pulley Vertical Knee Mill, 9” x 42” Table, 1 HP, Asset # 17568, Serial # 12/BR 100576, Table Size 9” x 42”, Longitudinal Table Travel 30”, Cross Travel 9”, Vertical Travel of Knee 16”, Spindle to Table Distance, Min – Max 0 – 18.5”, Spindle to ...more
Uhling #HP-3000, single bay case clamp, 72" L x 74" H x 24" D capacity
Ex-Factory | Charlotte, NC
Category: Clamp - Case & Feed Thru
Seller: Ex-Factory
Location: Charlotte, NC
Model: HP-3000
UHLING - HP-3000: Case Clamp (Single-Bay) -- Clamping capacity: 72" L x 74" H x 24" D; Large enough for multiple boxes; offers versatility, quick 30-Sec setup or changeover. -- Pressure Elements(4) Dual air pod pressure bars that are pneumatically activated; counterweight balanced; just position them effortlessly and ...more
9' x 9' Ransome #99, welding manipulator w/ subarc, free standing X-base
Mitrowski Welding Equipment | South Houston, TX
Category: Welding Manipulators
Seller: Mitrowski Welding Equipment
Location: South Houston, TX
Mfr: Ransome
Used Ransome 9x9 Welding Manipulator with Subarc, Manipulator:, Make: Ransome, Model: 99, 9ft of Vertical Lift, 9ft of Variable Speed Horizontal Travel, Free Standing X-Base, 460 Volt Input, Lincoln DC-600 / NA-3 Subarc Package, IdealArc DC-600 Power Source, NA-3 Subarc Controller and Head, Complete and Ready to Weld ...more
Douglas #Invex, Horizontal Load Case Packer/Tray Packer, 12-14 cases/min., 9.56"-15.36" direction travel, 5"-9.25" vertical dimension, 12.75"-21" across machine, 2008
Machinery & Equipment Co | Brisbane, CA
Category: Case Packer Machines
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Douglas
Model: INVEX
Year: 2008
Douglas horizontal load case packer / tray packer, Model Invex, stainless steel frame, Previously run at 12-14 cases/minute, runs wide range of products with fast, repeatable changeovers. Inside case dimension: capable of 9-9/16" - 15.36" direction of travel; 5" - 9-1/4" vertical dimension; 12.75" - 21" across ...more
19-1/2" x 96" LeBlond #Regal, engine lathe, 12-1/4" swing over cross slide, inch/metric, 3-jaw 12" chuck, #73117
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: REGAL
SERIAL. 10E-148, MODEL. REGAL, SWING OVER WAYS. 19-1/2", SWING OVER CROSS SLIDE. 12-1/4", DISTANCE BETWEEN CENTERS. 96", SPINDLE SPEEDS. (12) 40 TO 1600 RPM, SPINDLE TYPE. L, FEEDS. (48).0018 TO.104 IPR, THREADS (INCH). 2 TO 112 TPI, THREADS (METRIC).25 TO 14 MM PITCH, DIAMETER OF SPINDLE HOLE. 1-3/4", CHUCK. 12" 3 ...more
16" x 80" DoAll #16, engine lathe, 10" swing over cross slide, inch/metric, taper, 4-jaw 12" chuck, swivel compound, 10 HP
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Doall
Model: 16
SERIAL. 784019611848, MODEL. 16, SWING OVER WAYS. 16", SWING OVER CROSS SLIDE. 10", DISTANCE BETWEEN CENTERS. 80", SPINDLE SPEEDS. (18) 40 TO 2000 RPM, HOLE THRU SPINDLE. 2-5/8", ENGLISH FEEDS. (38).0016 TO.028 IPR, ENGLISH THREADS. (38) 2 TO 72 TPI, METRIC THREADS. (39).2 TO 14 TPMM, TAPER. YES, CHUCK. 12" 4 JAW ...more
Blanchard #18K-36, vertical spindle rotary surface grinder, 36" EMC w/neutrofier, segmented grinding wheel
Mohawk Machinery Inc | Cincinnati, OH
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Blanchard
Model: 18K-36
36" BLANCHARD "18K-36" EXTRA-HIGH VERTICAL-SPINDLE ROTARY SUYRFACE GRINDER - Cylindrical Wheel - 18 Vertical Range - 40 HP - Coolant System w/Automatic Conveyor Base, 36" BLANCHARD EXTRA-HIGH VERTICAL-SPINDLE ROTARY SURFACE GRINDER, Serial No 11343, Model 18K-36, Vertical-Spindle Machine Design, 36" Diameter ...more
4 Stand, Dexter rollformer, 5" roll space, 2.125" shaft diameter, 3 HP, 9" horiz.centers
Pearl Equipment Co | Nashville, TN
Category: Rollformers
Seller: Pearl Equipment Co
Location: Nashville, TN
Mfr: Dexter
DEXTER 4 STAND ROLL FORMER, DIAMETER SHAFTS | 2.125", ROLL SPACE | 5", HORIZONTAL CENTERS | 9", VERTICAL ADJUSTMENT | 2", CURRENTLY TOOLED FOR 15" CORVETTE WHEEL TRIM, GOOD CONDITION, MOTOR 3 HP 230/460V 60C 3PH.
Blanchard #20K-36, rotary surface grinder, 36" magnetic chuck, 40 HP, 42" swing, 16" under wheel, 20" wheel diameter, 18" vertical range
T R Wigglesworth Machinery | Bedford, OH
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Blanchard
Model: 20K-36
Used BLANCHARD 20K-36 Rotary Surface Grinder s a 36" magnetic chuck, 40 hp power, and a 42" swing. auto lubrication, oil skimmer, and conveyor base option. Compact with a 20" grinding wheel and multiple chuck speeds. The machine is the conveyor base option, and a sludge tote box for heavy duty grinding., Chuck Size ...more
Blanchard #8AD-12, 12" chuck size, 3 HP, 14" swing, 5.5" under wheel, 8" diameter, 3 HP, 5.5" vertical range, 1995
Asset Exchange Corporation | Elk Grove Village, IL
Seller: Asset Exchange Corporation
Location: Elk Grove Village, IL
Mfr: Blanchard
Model: -8AD-12
Year: 1995
Overview, Type: Grinder-Rotary Surface Manufacturer: 8AD-12 Model: 8AD-12 Year: 1995 Stock #: 92113 Status: For Sale Serial #: 15708 Country: United States, ImperialMetricsize 12" 12" Chuck Size 12" 304.8 mm Horz/Vert Vert Vert Power 3 hp 2.2 kW Swing 14" 355.6 mm Under Wheel 5.5" 139.7 mm ...more
18" x 80" Acra-Turn #1880, lathe, 11" swing over cross slide, inch/metric, 12 HP, coolant, forward & reverse, foot brake, 2000
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Acra-Turn
Model: 1880
Year: 2000
SERIAL. 080275, MODEL. 1880, YEAR. 2000, SWING OVER WAYS. 18", SWING OVER CROSS SLIDE. 11", SWING IN GAP. 24", DISTANCE BETWEEN CENTERS. 80", SPINDLE SPEEDS. 37 TO 1500 RPM, DIAMETER OF SPINDLE HOLE. 3.125", FEEDS LONGITUDINAL.001 TO.256 IPR, THREADS (ENGLISH). 1 TO 56 TPI, THREADS METRIC. 0.4 TO 7 MM, CHUCK. 12" 3 ...more
Maplan #503, cleated belt puller, 8" width x 120" L, 4" profile, 3" vertical adj, 480 V., dual 5 HP motors, motorized raise
Arlington Machinery | Lake Zurich, IL
Category: Pullers and Cutters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Maplan
Model: 503
Used 8" W x 120" L Maplan Cleated Belt Puller, Model 503 4" Max Profile Height, 3" Vertical Adjustment Independent Drives, 5 Hp Black Max Marathon Motors With Cone Gearboxes, Dual Pneumatic Hold-down Cyclers Motorized Raise Ft/Min Gauge, Torq % Gauge 30Amp, 480 Volt S/N: 129973 New Drive New Motors Pneumatic Cylinder ...more
Fitzpatrick #L83, Stainless steel chilsonator, 1.5" wide x 8" dia. rolls, vertical/horizontal feeders
Machinery & Equipment Co | Brisbane, CA
Category: Chilsonators
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Fitzpatrick
Model: L83
Fitzpatrick Model L83 chilsonator featuring 1.5" wide by 8" diameter rolls. Unit includes both vertical and horizontal feeders for material input. Constructed with stainless steel contact parts and mounted on an integrated stand with clear enclosure. Complete with control panel including roll pressure adjustment and ...more
Kalmar Ottawa #30, Terminal Tractor, 10,328 hours, 2005
Aaron Equipment Co | Schaumburg, IL
Category: Trucks and Flatbeds
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Ottawa
Model: 30
Year: 2005
used- kalmar ottawa terminal tractor, model 30. 25mph max ground speed. 3-speed transmission. vertical exhaust system with heatshield. serial # 311721, built 2005. 10,328 hours. 13,500lb vehicle weight empty.
600 gallon Stainless Steel jacketed mix tank, 60" dia. x 54" straight side, top center mounted agitator
Perry Videx LLC | Hainesport, NJ
Category: Stainless Steel Tanks and Vessels
Seller: Perry Videx LLC
Location: Hainesport, NJ
Used Approximately 600 Gallon Stainless Steel Jacketed Mix Tank, Capacity: 600 gallons, Dimensions: 60" dia. x 54" straight side, Top, center-mounted agitator, Mounted on legs, _UNKNOWN_ _UNKNOWN_, Capacity. 600 gal, Diameter. 5', Height. 4.5', Type of stainless. Stainless Steel, Vertical/Horizontal. Vertical ...more
18" x 40"/60"/80"/119" Republic-Lagun #AT-1840/60/80/120-G-TW, American Turnmaster lathe
Equipment Hub | Decatur, GA
Category: Engine Lathes
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Republic-Lagun
Model: AT-1840/60/80/120-G-TW
Stock #: Lagun-AT-1840/60/80/120-G-TWBrand: Republic LagunModel: AT-1840/60/80/120-G-TW, Swing Over Bed: 18″Swing Over Cross Slide: 11″Distance Between Centers: 40″/60″/80″/119″Spindle Speed RPM Range: 20-1,600 RPMHole Through Spindle: 3.15″Spindle Nose: D1-8Motor HP: 10 ...more
7500 gallon 100 psi, 108" diameter x 168" T/T, Rubber Lined, Carbon Steel Pressure Vessel
EcReCon Inc. | Pedericktown, NJ
Category: Pressurized Carbon Steel Tanks
Seller: EcReCon Inc.
Location: Pedericktown, NJ
, Qty (4) each: 7,500 gallon, Rubber lined/Carbon Steel pressure vessel. 9' dia x 14' T/T (dimensions are approx.).,., Gallons. 7500 gal, PSIG. 75, ID - Inches. 114 in, Length. 15', Material. RL/CS, Vert/Horiz. V.
Chevalier #FM-3VS, vertical mill, 3 HP, V-Speed, 9" x42"power feed table, digital read out
C.W. Wood Machinery Inc | Cincinnati, OH
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Chevalier
Model: FM-3VS
CHEVALIER VERTICAL MILLING MACHINE, MODEL: FM-3VS, SERIAL NUMBER: BM 843779, Table Size: 9" x 42", Longitudinal Travel: 24", Cross Travel: 12", Vertical Knee Travel: 16", Ram Travel: 12", Turret Rotation: 360 Degrees, Spindle Speeds, Infinitely Variable: 60 to 4200 RPM, Spindle Feeds: (3).0015",.003",.006", Spindle ...more
13" x 40" Turnmaster #1340, engine lathe, 8-1/4" swing over cross slide, inch/metric threads, foot brake, 5 HP
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Turnmaster
Model: 1340
SERIAL., MODEL. 1340, YEAR NEW., SWING OVER WAYS. 13-3/8", SWING OVER CROSS SLIDE. 8-1/4", DISTANCE BETWEEN CENTERS. 40", SPINDLE SPEEDS. 35 TO 2500 RPM, DIAMETER OF SPINDLE HOLE. ", THREADS (ENGLISH). (45) 2 TO 72 TPI, THREADS (METRIC). (39) O.2 TO 14 TPMM, LONGITUDINAL FEEDS. 0.002 TO 0.067 IPR, CROSS FEEDS. 0.001 ...more
Cincinnati #Monoset, tool & cutter grinder, 12" swing, 1.25" Collet, 4" diameter grinding wheel, 4000-8000 RPM, 1964
GCH Machinery | Warren, MI
Category: Tool and Cutter Grinders
Seller: GCH Machinery
Location: Warren, MI
Mfr: Cincinnati
Model: MONOSET
Year: 1964
Cincinnati Monoset Tool & Cutter Grinder, CINCINNATI MILACRON MONOSET CUTTER TOOL GRINDER, PRIVATE Rebuilt 1993tc' \l 1 Rebuilt 1993, S/N 2D1C5P-4AYear: 1964, STANDARD, CAPACITY, Work head:, Swing over main slide, max. dia. 12, Collet work dia. - max.1.25, - min. 0.12, Lead generated by spiral lead mechanism ...more
19" x 54" LeBlond #Makino-Servo-Shift, engine lathe, 12-1/4" swing over cross slide, 3-jaw chuck, inch/metric, 7.5 HP
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Leblond
Model: MAKINO-SERVO-SHIFT
SERIAL. 14E-144, MODEL. MAKINO SERVO SHIFT, SWING OVER BED. 19", SWING OVER CROSS SLIDE. 12-1/4", DISTANCE BETWEEN CENTERS. 72", SPINDLE SPEEDS. 40 TO 1,600 RPM, SPINDLE HOLE. 3", CHUCK. 3 JAW, THREADS INCH. (48) 2 TO 112 TPI, THREADS METRIC. 0.25 TO 14 MM, FEEDS. (48) 0.0018" TO 0.104", CROSS SLIDE TRAVEL. 11-1/4" ...more
13" x 40" Kent #1340BV, gap bed engine lathe, 8-1/4" swing over cross slide, 3-jaw chuck, inch/metric threads, 2012
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Kent
Model: 1340BV
Year: 2012
SERIAL. 124890520, MODEL. 1340BV, YEAR NEW. 2012, SWING OVER BED. 13", SWING OVER CROSS SLIDE. 8-1/4", DISTANCE BETWEEN CENTERS. 40", SPINDLE SPEEDS. 40 TO 200 RPM, SPINDLE HOLE. 1-9/16", CHUCK. 3 JAW, THREADS INCH. 2 TO 56 TPI, THREADS METRIC. 0.5 TO 12 MM, LONGITUDINAL FEEDS. 0.0016" TO 0.046", CROSS FEEDS L. ...more
12" Howa #2167, 3-jaw hydraulic chuck
C.W. Wood Machinery Inc | Cincinnati, OH
Category: Lathe Chucks
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Howa
Model: 2167
12" Howa #2167, 3-jaw hydraulic chuck
C.W. Wood Machinery Inc | Cincinnati, OH
Category: Lathe Chucks
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Howa
Model: 2167
28" Warner & Swasey 4-jaw chuck, #13561
Vander Ziel Machinery Sales | Alto, MI
Category: Lathe Chucks
Seller: Vander Ziel Machinery Sales
Location: Alto, MI
Mfr: Warner & Swasey
8" Buck Forkhardt #3AT8, Adus-Tru Chuck
Machinery Solutions Inc | Lexington, SC
Category: Lathe Chucks
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Buck
Model: 3AT8
Buck Forkhardt #3AT8, Chuck 8?, Adustru #A0002083002, PRICE ON REQUEST Stock# UT00004No additional available.
12" Rohm, 4-Jaw Chuck w/D1-6 Mount
Norman Machine Tool Ltd | Baltimore, MD
Category: Lathe Chucks
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Rohm
ROHM 12″ Solid 4-Jaw Chuck with D1-6 Mount, Inventory # 9150, 12″ Solid 4-Jaw Chuck with D1-6 Mount, FOB Our Baltimore, MD Warehouse, Related.
8" Quality, Solid 4-Jaw Chuck w/Flatback Mount
Norman Machine Tool Ltd | Baltimore, MD
Category: Lathe Chucks
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Quality
Quality 8″ Solid 4-Jaw Chuck with Flatback Mount, Inventory # 9142, 8″ Solid 4-Jaw Chuck with Flatback Mount, FOB Our Baltimore, MD Warehouse, Related.
16" 3-Jaw self centering flat back chuck, new
Kevins Equipment Co. KEC | Houston, TX
Category: Lathe Chucks
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Profax
16" 3-JAW SELF CENTERING FLAT BACK CHUCK.
Kitagawa #BT208, 8" 2-Jaw Hydraulic Chuck
Toolquip Inc | Lebanon, OH
Category: Lathe Chucks
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Kitagawa
Model: BT208
USED KITAGAWA BT208 8" 2 JAW HYDRAULIC CHUCK, Offered with a 14 day warranty., Subject to local sale. Please verify part is still available before proceeding with payment., Thank you!, KITAGAWA BT208 8" 2 JAW CHUCK USED.
SMW Autoblok #AXN-570, indexing chuck
Premier Equipment Inc | Altamonte Springs, FL
Category: Lathe Chucks
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Smw
Model: AXN-570
SMW Autoblok AXN570 Indexing Chuck (subject to buyer verification):Large indexing chucks like the AXN-570, are predominately utilized by the Oil and Gas industry, to machine largevalves, fittings, etc, Purchased New in 2017https://www.smwautoblok.com/sv/wp-content/uploads/sites/17/2022/09/AXN_EN.pdf.
10" Cushman #2162110D06B, 2-jaw power chuck
C.W. Wood Machinery Inc | Cincinnati, OH
Category: Lathe Chucks
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Cushman
Model: 2162110D06B
2000 gallon Vertical fiberglass tank, 72" dia. x 10' straight side, dished top, flat bottom
Perry Videx LLC | Hainesport, NJ
Category: Fiberglass Tanks
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Vertical
Used approximately 2,000 gallon vertical fiberglass tank. 72" diameter X 10' straight side. Dished top, flat bottom., _UNKNOWN_ 2,000 GALLON, Capacity. 2,000 gal, Dimensions. 72" diameter x 10' straight side.
14" x 40" Jet #GH-1440ZX, used gap bed lathe w/ 3-1/8" spindle hole, 23-5/8" gap swing, foot brake, thread dial
T & S Tool & Supply Co Inc | Holland, OH
Category: Engine Lathes
Seller: T & S Tool & Supply Co Inc
Location: Toledo, OH
Mfr: Jet
Model: GH-1440ZX
This is a USED Jet GH-1440ZX Gap Bed Lathe, Stock #321910 and has a 14" swing & 40" centers. Gap width is 12" & it will swing 23-5/8" in that gap. s a huge 3-1/8" spindle hole & 12 spindle speeds from 42 to 1800 RPM's. Then longitudinal feed rates of.0015"-.0900" IPR, cross feeds from.0006"-.0360 IPR. Will ...more
12" x 12" Troyke #DMT-15, cross slide rotary table, lot #3620-3
Machinery Central | Louisville, KY
Category: Rotary Tables
Seller: Machinery Central
Location: Louisville, KY
Mfr: Troyke
Model: DMT-15
, Troyke DMT-15, a used 12"x12" cross-slide rotary table for precision machining, s T-slots, 360 manual rotation, and versatile mounting. Ideal for milling and dividing, Lot No. 3620-3 offers reliable functionality for your tooling needs., Spec Sheet:, Troyke - DMT-15 Cross Slide Rotary Table - Lot No. 3620-3, USED ...more
200 HP 895 RPM General Electric, Frame B509TP20, TEFC, HT, 1.15 service factor, unused surplus, 2300/4000 Volts
Pump & Motor Works | Okmulgee, OK
Category: Vertical Pump Motors
Seller: Pump & Motor Works
Location: Okmulgee, OK
Mfr: General Electric
Frame: B509TP20
25" Cleereman #25, single spindle drill, 30" x16" T-slotted table, 5 HP, #4MT, #58636
Yoder Machinery Sales | Holland, OH
Category: Single Spindle Drill Presses
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cleereman
Model: 25
SERIAL. 25C495, MODEL. 25, SWING, SPINDLE CENTER TO LOWER COLUMN. 12-1/2", SWING, SPINDLE CENTER TO UPPER COLUMN. 11-1/2", AREA OF WORK TABLE, T-SLOTTED. 30" X 16", TABLE TRAVELS. 20" X 12", VERTICAL TABLE ADJUSTMENT. 12", MAXIMUM DISTANCE SPINDLE TO TABLE. 27", VERTICAL ADJUSTMENT OF SLIDING HEAD. 18", POWER FEED ...more
100 HP 3555 RPM Westinghouse TAFC, Frame 400VP, Vertical Motor, 460 Volts, 1 S.F., 3 phase, Used
Universal Industrial Assets | Gonzales, LA
Category: Vertical Pump Motors
Seller: Universal Industrial Assets
Location: Gonzales, LA
Mfr: Westinghouse
Frame: 400VP
For sale is one (1) used Westinghouse Life-Line Vertical Electric Motor. Model: TAFC. 100 HP, 3555 RPM, 3 Phase, 60 Hz, 400VP Frame, 460 Volts, 112 Amps. 1 SF. Shaft 1 5/8" diameter x 4 1/2" long., Item is used. Tested, is electrically ok..
11" x 20" Hardinge #HLV-EM, engine lathe, 6" swing over cross slide, 6" chuck, 3 point Steady Rest, #59679
Yoder Machinery Sales | Holland, OH
Category: Engine Lathes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Hardinge
Model: HLV-EM
SERIAL. 8353-T, MODEL. HLV-ME, SWING OVER WAYS. 11", SWING OVER CROSS SLIDE. 6", DISTANCE BETWEEN CENTERS. 20", SPINDLE SPEEDS. (16) 125 TO 3000 RPM VARIABLE, ENGLISH THREADS. (36) 11 TO 108 THREADS PER INCH, METRIC THREADS. (36).275 TO 2.7 PITCH IN MM, SPINDLE HOLE. 1-1/2", CHUCKS. 6" 3 JAW & 6" 6 JAW, COLLET. ...more
JUST ADDED!
6" Giddings & Lewis #460F, x-240", Y-120" 975 RPM, #6 MT 1958
Star Equipment Co., Inc. | Utica, MI
Category: Boring Mills, Horizontal, Floor Type
Seller: Star Equipment Co., Inc.
Location: Utica, MI
Mfr: Giddings & Lewis
Model: 460F
Year: 1958
1958 GIDDINGS & LEWIS 460F, Spindle Size. 6", X-Horiz Tvl of Col. 240", Y-Vert Tvl of Head. 120", Power. 30 hp, RPM. 800 RPM.
Production Equipment Industries heavy duty butt welder, 100 KVA transformer, 440/460/480 V., single phase, #6882
T J Snow Co Inc | Chattanooga, TN
Category: Butt and Flash Welders
Seller: T J Snow Co Inc
Location: Chattanooga, TN
Mfr: Production Equipment Industries
Machine, Stock Number: 6882 Name: PEI Heavy Duty Butt Welder Transformer: 100 KVA Manufacturer: PEI Voltage: 440/460/480 Volts, Single Phase Air Type: Two Vertical Pneumatic Clamping Cylinders Initiation: Foot Switch FAST SHIP Machine: YES.
5" Giddings & Lewis #D5-T, horizontal boring mill, 60" x120" T-slotted table, 108" cross, 72" saddle, 80" vert travels, 1973
Tom Hale Equipment Co. Inc | Crossville, TN
Category: Boring Mills, Horizontal, Table Type
Seller: Tom Hale Equipment Co. Inc
Location: Crossville, TN
Mfr: Giddings & Lewis
Model: D5-T
Year: 1973
5 Inch G&L Horizontal Boring Mill, Model D5-T, New in 1973, 60 X 120 T-Slotted Table, 108 Inches of Cross Travel, 72 Inches of Saddle Travel, 80 Inches of Vert. Travel, No. 50 Spindle Taper, Tail Stock, $99,500.00 Checked Out & Loaded Out, Tom Hale Equipment Company, Inc., Best source of Horizontal Boring Mills ...more
33" x 204" TOS #SUS80, engine lathe, 20" swing over cross slide, inch/metric, 4-jaw 24.5" chuck, 2-Axis digital read out, 20 HP, 1982
Belmont Machinery Co | Aurora, IL
Category: Engine Lathes
Seller: Belmont Machinery Co
Location: Aurora, IL
Mfr: Tos
Model: SUS80
Year: 1982
Size 33"x17'cc Make TOS Year 1982, ONE USED - 33” x17’cc TOS Engine Lathe, Model: SUS80, Serial Number: 0450293, New 1982, 33” Swing Over Bedways, 20” Swing Over Cross Slide, Hardways, Inch / Metric Threading, Spindle Speeds from 7.1 to 900 RPM, 3.5” Spindle thru Hole, Power Rapid ...more
21" Cincinnati #21" Box Column, single spindle drill, 16" x16-1/2" table, 3 HP, #74918
Yoder Machinery Sales | Holland, OH
Category: Single Spindle Drill Presses
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cincinnati
Model: 21BOX
SERIAL. 1L-2158, MODEL. 21" BOX COLUMN, SPINDLE TO LOWER COLUMN. 11", SPINDLE TO UPPER COLUMN. 10", SPINDLE TO TABLE. 22-1/4" MAX., SPINDLE SPEEDS. (9) 175 TO 3500 RPM, SPINDLE FEEDS.004/.008/.014/.020 IPR, SPINDLE STROKE (POWER). 9-3/4", SPINDLE NOSE DIAMETER. 2-13/16", SPINDLE TAPER. #4 MT, TABLE AREA. 16" X ...more
32" x 120" National #LBP-32-120, Engine Lathe, 22" swing over cross slide, 9" bore, 300 RPM, inch/metric thread, 20 HP, Newall digital read out, tailstock, Steady Rest
N S Machine Corp. | Granger, IA
Category: Engine Lathes
Seller: N S Machine Corp.
Location: Granger, IA
Mfr: National
Model: LBP-32-120
, Manufacturer: National, Model Number: LBP-32-120, Serial Number: 12222, Stock Number: 14053, s:, Newall DP700 2-Axis Digital Readout, Pendant control, Removable gap, 24-3/4” Front 4 Jaw chuck, 23-3/4 Rear 4 jaw chuck, Power rapids for longitudinal & cross, 2 speed tailstock - 1/1 and 1/4, Aloris Quick ...more
15" Bison 3 Jaw Lathe, 3-jaws 15" chuck
Yoder Machinery Sales | Holland, OH
Category: Lathe Chucks
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bison
BRAND NAME. BISION ', DIAMETER OF CHUCK. 15", NUMBER OF JAWS. 3", HOLE THRU CENTER. 5", BACKING PLATE. D-1-8.
Taber #1342, Pedestal (sump) Pump, 75 gpm @ 92' TDH, surplus - Unused, Stainless Steel, 6' 8 lift, No drive
EcReCon Inc. | Pedericktown, NJ
Category: Sump Pumps
Seller: EcReCon Inc.
Location: Pedericktown, NJ
Mfr: Taber
Model: 1342
, Taber Surplus - unused. Pedestal (sump) pump. 6'8 lift. No drive., TABER 1342, GPM. 75, Type. Centrifugal, Horz/Vert. V, Material. SS, Ft/Hd. 92.00.
JUST ADDED!
Holz-Her #Evolution, CNC vertical machining center, 126" X, 36" Y, 2" Z, HSK F63, 6 ATC, 2021
Ex-Factory | Charlotte, NC
Category: Woodworking CNC Machining Centers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Holz-Her
Model: EVOLUTION
Year: 2021
HOLZ-HER - EVOLUTION 7405: CNC Machining Center (Vertical) -- Flexible "Vertical" Machining Center can reach movement speeds of: 223 FPM (68 MPM) in "X" & "Y" axis; 49 FPM (15 MPM) in "Z" axis with total safety. -- Working CapacityMaximum part size for "X" axis: 126" (3,200 mm); "Y" axis: 36.2" (920 mm); max. part ...more
200 HP 1780 RPM General Electric, Frame L444TP16, weather protected enclosure type 1, HT, 1.15 service factor, fire pump motor, 460 Volts, new
Pump & Motor Works | Okmulgee, OK
Category: Vertical Pump Motors
Seller: Pump & Motor Works
Location: Okmulgee, OK
Mfr: General Electric
Frame: L444TP16
21" x 80" Clausing Colchester #8-21-80, engine lathe, 4-jaw 14" chk, inch/metric, tailstock
D & D Industries Inc | Monclova, OH
Category: Engine Lathes
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Clausing
Model: 8-21-80
MODEL #: COLCHESTER 8-21-80, SERIAL #: 8/0225/75179, 21" SWING OVER BED, 14" SWING OVER CROSS SLIDE, 80" DISTANCE BETWEEN CENTERS, 18-1400 RPM SPINDLE SPEEDS, 3-1/2" HOLE THROUGH SPINDLE, INCH AND METRIC THREADING, 14" 4 JAW CHUCK, 9" STEADY REST, COOLANT, CHIP PAN, TAIL STOCK, 12.5 HP MAIN MOTOR, 107" LR x 48" FB x ...more
DoAll #FU-205, vertical/horizontal mill, 53-3/4" x 12" table, 2"-22" throat, Heidenhain 2-Axis digital read out, 5 HP
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Doall
Model: FU-205
SERIAL. 5825-5MODEL. FU-205AREA OF TABLE. 53-3/4" X 12"SPINDLE SPEEDS. 40 TO 1500 RPM (VARIABLE)POWER LONGITUDINAL FEED. 1/2 TO 21 IPMPOWER CROSS FEED. 1/2 TO 21 IPMLONGITUDINAL TRAVEL. 32"CROSS TRAVEL. 15-3/4"VERTICAL TRAVEL OF KNEE. 17-5/8"DEPTH OF THROAT. 2" MINIMUM / 22" MAXIMUMTAPER IN SPINDLE. #40 ERICKSON QUICK ...more
7500 cfm Wheelabrator #34-WCC-36, (12) vertical cartridge filters, 3780 sq.ft., automatic pulse clean
AM Industrial | Brook Park, OH
Category: Dust Collectors
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Wheelabrator
Model: 34-WCC-36
Product, Stock Number AM22037 Brand Other Filter Media Area (square feet of media) 3,780 Capacity 7,500.00 cfm, Wheelabrator 7,500 cfm cartridge-type dust collection system, Model: 34 WCC 36Holds (12) cartridge filters (vertical)Automatic Pulse Clean SystemSingle Hopper Outlet with Sealing Drum Cover KitSteel Support ...more
Hardinge #LS-200DBR-12-T, turret
iGAM | Detroit, MI
Category: Lathe Attachments
Seller: iGAM
Location: Detroit, MI
Mfr: Hardinge
HARDINGE LS-200DBR-12-T industrial robotic arm available, used condition. Ideal for enhancing automation in your operations. Act quickly to secure advanced functionality and boost productivity with this robust solution., Spec Sheet, HARDINGE LS-200DBR-12-T, Dimensions. 23X20X10, Weight. N/A.
Knuth #Numturn, CNC Box Way Lathe
Blumberg Machinery Co | Bannockburn, IL
Category: CNC Lathes and Turning Centers
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Knuth
Model: NUMTURN
Numturn 500/1000 FANumturn 500/2000 FANumturn 660/1000 FANumturn 660/1500 FANumturn 660/2000 FANumturn 660/1500 SINumturn 660/1000 SINumturn 500/1000 CNC (SI)Numturn 500/1500 SINumturn 500/2000 SINumturn 660/2000 SI Working Area Workpiece length (max.) 36 in 77 in 38 in 58 in 78 in 58 in 38 in 36 in 57 in 77 in 78 in ...more
1000 gallon Perry Products, Stainless steel tank, 60" dia. x 86" straight side, dished top, slight cone bottom
Perry Videx LLC | Hainesport, NJ
Category: Stainless Steel Tanks and Vessels
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Perry
Used Approximately 1,000 Gallon Stainless Steel Tank, Capacity: 1,000 gallons, Manufacturer: Perry Products, Serial: A6656 2, Dimensions: 60" dia. x 86" straight side, Dished top, slight cone bottom, Mounted on (3) legs, PERRY PRODUCTS 1,000 GALLON, Capacity. 1,000 gal, Diameter. 5', Height. 7.17', Type of ...more
Kearney & Trecker #415TF, horizontal mill, 15-1/2" x80" table, 15 HP, dual controls, #62762
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Kearney & Trecker
Model: 415TF
SERIAL. TF1005, MODEL. 415TF, AREA OF TABLE. 80" X 15-1/2", SPINDLE SPEEDS. (24) 15 TO 1500 RPM, LONGITUDINAL & CROSS FEEDS. (32) 3/8 TO 90 IPM, VERTICAL FEEDS. (32) 1/8 TO 30 IPM, LONGITUDINAL TABLE TRAVEL. 42", CROSS TRAVEL. 14", VERTICAL KNEE TRAVEL. 18", CENTER OF SPINDLE TO TOP OF TABLE. 0 MIN. TO 18" MAX. ...more
14 Stand, Lockformer #14D-SC Duplex rollformer, 1-3/8" shaft, 8" horizontal/4-1/2" vertical centers
Pearl Equipment Co | Nashville, TN
Category: Rollformers
Seller: Pearl Equipment Co
Location: Nashville, TN
Mfr: Lockformer
Model: 14D-SC
LOCKFORMER 14 STAND DUPLEX ROLLFORMER, MODEL | 14D-SC, NUMBER OF STANDS | 14, SHAFT DIAMETER | 1-3/8", HORIZONTAL CENTERS | 8", VERTICAL CENTERS | 4-1/2", MAX SHEET WIDTH | 60", ELECTRICAL | 240/480 VAC 3 PHASE, CURRENTLY WIRED 480 VAC, MOTOR: 10 HP.
82" x 212" Amet #CWLS25-5400Z, Circumferential Welding Lathe, 31" Face diameter, 5500 lb. Part Capacity, 2015
Yoder Brothers Machinery | Toledo, OH
Category: Welding Lathe
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Amet
Year: 2015
SERIAL. P14024, MODEL. CWLS25-5400Z, YEAR NEW. 2015, CONDITION. LIKE NEW, IN CRATE, HEADSTOCK / TAILSTOCK. 31" DIAMETER FACE, PART DIAMETER (MAX). 82" (2,082MM), SUPPORT STEADY RESTS. FOR 47" TO 82" OD PARTS, CENTER DISTANCE (MAX). 212" (5,400MM), PART CAPACITY. 5,500 LBS (2,000 KG), WELDING CARRIAGE TRAVEL. SERVO ...more
Hopper, Stainless Steel, dual discharge lanes, 18" x 14" top opening, 8" x 8" vertical drop zone, (2) 12" x 12" discharge chutes, 0.5 HP
Machinery & Equipment Co | Brisbane, CA
Category: Hoppers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Stainless steel hopper, with dual discharge lanes and electrically driven diverting panel. Top opening measures 18" x 14", leading to 8" x 8" vertical drop zone, leading to (2) 12" x 12" discharge chutes with stainless steel diverting panel, driven by approximately 0.5 HP Servo motor. Intended for feeding belt ...more
4 Stand, Tishken #4-MW-2, rollformer with 3-Axis straightener, 2" arbor diameter, 14" roll space
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Tishken
Model: 4-MW-2
TISHKEN FOUR STAND ROLL FORMER, MODEL NUMBER. 4-MW-2, SERIAL NUMBER. 21094293, ARBOR DIAMETER. 2", ROLL SPACE. 14", LOWER ARBOR FROM BASE TOP. 5", VERTICAL ADJUSTMENT. 3", ESTIMATED DC DRIVE. 20HP, A 3 AXIS STRAIGHTENER YES, MISSING ONE OUTBOARD SUPPORT.
Bucher #Unipektin-C25, Fruit & Fiber Mill, Rotary Cutter w/ Auger Feed, Motor Drive, Discharge Box
Revelation Machinery | Chicago, IL
Category: Food Mills
Seller: Revelation Machinery
Location: Chicago, IL
Model: UNIPEKTIN-C25
Year: 1900
Make: Bucher Unipektin, Model: C25, Year: 1900, Machine Location: Upon Request, Machine Overview, The Bucher Unipektin C25 is an industrial stainless rotary mill used to reduce fruit, root vegetable, and fibrous product prior to pressing or extraction. This unit s a vertical auger feed design with cutting drum ...more
2 Spindle, Cemco #MVB-54, Vertical Boring Machine, 54" x 15" table, 2 universal spindles, (3) 2 HP-1725 RPM, 6" vertical stroke
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cemco
Model: MVB-54
CEMCO MBV 54 Vertical Boring Machine54" x 15" Cast iron table with wooden top,:(2) Universal spindles with movable spindle supports,(3) 2 HP - 1,725 RPM direct drive spindle motors,36" Stationary table height; 6" Max. vertical stroke, spindles advance hydraulically at 0 - 30 strokes/Min;Foot pedal actuated w/single ...more
6" x 18" Kent #SGS-618, surface grinder, 7" x1-1/4" x1/2" grinding wheel, 1998, #73810
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Kent
Model: SGS-618
Year: 1998
SERIAL. 08074010, MODEL. SGS-618, YEAR NEW. 1998, CAPACITY. 6" X 18", LONGITUDINAL TABLE TRAVEL. 19" MAX, CROSS TABLE TRAVEL. 7" MAX, SPINDLE CENTER TO TABLE TOP. 15-3/4 MAX, VERTICAL HANDWHEEL GRADUATION. 0.0002", VERTICAL HANDWHEEL PER REVOLUTION. 0.050", MAGNETIC CHUCK FINE LINE. 6" X 8", CROSS HANDWHEEL ...more
20000 lb. K & S, exit coil car, 40" W, 60" OD, 24" vertical lift, 4" bore cylinder, 5 HP AC motor, 1998
D & H Machinery Inc | Toledo, OH
Category: Coil Cars
Seller: D & H Machinery Inc
Location: Toledo, OH
Year: 1998
K&S Exit Coil Car, -Capacity: 20,000# x 48" wide, -40" Wide Bed, -60" O.D. Capacity, -24" Vertical Lift, -4" Bore Hydraulic Cylinder, -Self Contained Hydraulics, 5 HP AC Motor, 1800 RPM, -Coil Retaining Arms, -Retractable Cable Reel, -Overall Size: 66" L x 55" W x 68" High, -In Storage: Toledo, OH.
JUST ADDED!
Bridgeport #Series-II-Special, vertical mill, 11" x58" tbl., 2 HP, 33.5" X, 15" Y, 16" Z, 4200 RPM, R-8, Acurite III 2 Axis digital read out, servo X-Axis PF, chrome
Machinery Central | Louisville, KY
Seller: Machinery Central
Location: Louisville, KY
Mfr: Bridgeport
Model: SERIES-II-SPECIAL
Spec Sheet:, Bridgeport Series II Special Mill w/Rebuilt 2 HP, DRO, PF, Chrome, 11x58 Table, Model: Series II Special, Table Area (T-Slotted): 58" x 11", Motor: 2 HP Rebuilt Top Half, Servo Brand X Axis Power Feed, Acurite III 2 Axis DRO, Chrome Box Ways, Maximum Workpiece Weight:1500 lbs, Spindle Taper: R8, Travels: ...more
1000 HP 1185 RPM US Motor, Frame 6810P, 300% EHT, 1.25 service factor, weather protected enclosure type 1, 2300/4000 Volts
Pump & Motor Works | Okmulgee, OK
Category: Vertical Pump Motors
Seller: Pump & Motor Works
Location: Okmulgee, OK
Mfr: Us Motor
Frame: 6810P
18 Stand, B & K, rollformer, 3-1/4" roll shaft diameter, 52" roll space, 12" vertical adj.
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: B & K
UTUBE NUMBER: 3981, MANUFACTURER: B&K, Number of Stands: 18, Roll Shaft Diameter: 3-1/4″, Roll Space: 52″, Horizontal Centers: First (10) Stands – 16″, Last (8) Stands – 32″, Vertical Adjustment: 12″, Base to Lower Shaft:, Line Speed:, Line Direction: Left – Right ...more
80.6 gallon Freude Titan, Stainless Steel Vertical Mixing Vessel, 700 mm diameter x 697 mm Straight Side
Perry Videx LLC | Hainesport, NJ
Category: Stainless Steel Tanks and Vessels
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Titan
Used Freude Titan GmbH approximately 305 litre total capacity and approximately 250 litre working capacity 316Ti stainless steel mixing vessel. Unit measures approximately 700mm diameter x 697mm straight side. Has welded dished bottom and open top. Includes top entry, off-set 3-blade agitator with motor. Unit is ...more
9" Seoam, Solid 3-Jaw Chuck w/Flat Back Mount
Norman Machine Tool Ltd | Baltimore, MD
Category: Lathe Chucks
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Seoam
SEOAM 9″ Solid 3-Jaw Chuck with Flat Back Mount, Inventory # 9138, 9″ Solid 3-Jaw Chuck with Flat Back Mount, FOB Our Baltimore, MD Warehouse, Related.
12" Kitagawa, Solid 4-Jaw Chuck w/D1-6 Mount
Norman Machine Tool Ltd | Baltimore, MD
Category: Lathe Chucks
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Kitagawa
Kitagawa 12″ Solid 4-Jaw Chuck with D1-6 Mount, Inventory # 9145, 12″ Solid 4-Jaw Chuck with D1-6 Mount, FOB Our Baltimore, MD Warehouse, Related.
17.75" Quality, Solid 4-Jaw Chuck w/L2 Spindle Mount
Norman Machine Tool Ltd | Baltimore, MD
Category: Lathe Chucks
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Quality
Quality 17 3/4″ Solid 4-Jaw Chuck with L2 Spindle Mount, Inventory # 9151, 17 3/4″ Solid 4-Jaw Chuck with L2 Spindle Mount, FOB Our Baltimore, MD Warehouse, Related.
32" 3-Jaw chuck, 10.5" thru hole with A-15 mount
Harris Machine Tools, Inc. | Houston, TX
Category: Lathe Chucks
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
8.25" Cushman, Solid 4-Jaw Chuck w/Flat Back Mount
Norman Machine Tool Ltd | Baltimore, MD
Category: Lathe Chucks
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Cushman
Cushman 8 1/4″ Solid 4-Jaw Chuck with Flat Back Mount, Inventory # 9144, 8 1/4″ Solid 4-Jaw Chuck with Flat Back Mount, FOB Our Baltimore, MD Warehouse, Related.
Hardinge, Bridgeport #VMC-1000P3, CNC vertical machining center, 40" X, 20" Y, 20" Z, 44" x20" tbl., #40, 8000 RPM, 20 automatic tool changer, Fanuc 0i-MC, 2006
Great American Eqpt Co | Cincinnati, OH
Category: Vertical CNC Machining Centers
Seller: Great American Eqpt Co
Location: Cincinnati, OH
Mfr: Hardinge
Model: VMC-1000P3
Year: 2006
HARDINGE BRIDGEPORT CNC VERTICAL MACHINING CENTER, Model VMC1000p3, S/N NVCA6G0090, New 2006, Stock# Q11951, Fanuc Series 0i-MC CNC Control, RS-232 Port, 8000 RPM Spindle, Through Spindle Coolant, Coolant System, Chip Conveyor, 25 Tool Holders Included., Very Low Use Cutting Aluminum, Machine is in Excellent Condition ...more
150 HP 1180 RPM General Electric 5K6288XJ0205A, Frame 6288LPZ16, 1.0 service factor, 460 Volts
Power Zone Equipment | Center, CO
Category: Vertical Pump Motors
Seller: Power Zone Equipment
Location: Center, CO
Mfr: General Electric
Frame: 6288LPZ16
Brand/Model: Electric 5K6288XJ0205A : Used Electric 150 HP Electric Motor with following s: • 1180 RPM • 460 Volts • 174 Amps • 3 Phase • 60 Hz • 1.0 Service Factor • Enclosure • 6288LPZ16 Frame • N Type • Weight 3,220 lbs • Dims 82"Lx33"Wx33"H HP: ...more
Lathe Chuck Jaws, 3 piece set
Machinery Central | Louisville, KY
Category: Lathe Chucks
Seller: Machinery Central
Location: Louisville, KY
Spec Sheet:, Lathe Chuck Jaws 3 Piece Set, Used, Lathe Chuck Jaws, Set of 3, Measured Dimensions:, Height: 3-3/8, Width: 7/8, Deep: 2-1/2, Gap between Teeth on back: 1/8, Stamped: 1-2-3 / C8501.
10" Skinner 3-jaw universal D1-4 Camlock back lathe chuck with wrench (YMC)
T & S Tool & Supply Co Inc | Holland, OH
Category: Lathe Chucks
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: Skinner
This is a USED Skinner 10" 3-Jaw self-centering lathe chuck with two-piece reversible jaws and a D1-4 camlock back plate, jaws look in pretty good condition. You can identify the D1-4 camlock back by the three camlocks that are 5/8" in diameter. Chuck has a 2.725" I.D. hole diameter and we greased up the jaws, so it ...more
8" H.D. HHT Yama, 4-jaw independent lathe chuck w/flat back, (YMC) NEW
T & S Tool & Supply Co Inc | Holland, OH
Category: Lathe Chucks
Seller: T & S Tool & Supply Co Inc
Location: Holland, OH
Mfr: H.d. Hht Yama
This is a NEW 8" lathe chuck that is marked H.D. HTT Yama and is a 4-jaw independent chuck with a flat back. It includes 4 mounting bolts and a chuck key for mounting to a back plate of your choice. Chuck has a center hole opening of 2-1/8" and was Cosmoline coated, then wrapped in plastic. We have cleaned the chuck ...more
5500 gallon St. Regis, Stainless Steel jacketed mix tank, 150 psi, bottom side agitator
Perry Videx LLC | Hainesport, NJ
Category: Stainless Steel Tanks and Vessels
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: St. Regis
Used Approximately 5,500 Gallon Stainless Steel Jacketed Mix Tank, Manufacturer: St. Regis, Capacity: 5,500 gallons, Dimensions: 120" dia. x 128" straight side, Serial: 3785, Jacket pressure: 150 psi, Bottom side agitator, Dish top, flat/slight slant bottom, ST. REGIS 5,500 Gallon, Capacity. 5,500 gal, Diameter. ...more
JUST ADDED!
OKS, 528 Gallon Vertical Air Receiver Tank, 160 psig, 2000 Liters, 2020
VX Machinery | Sylvania, OH
Category: Air Receivers
Seller: VX Machinery
Location: Sylvania, OH
Year: 2020
, Capacity: 528 Gallons (2000 Liters), Working Pressure: 11 Bar (160 PSIG), Test Pressure: 16 Bar (232 PSIG), Temperature Range: -10 °C to +50 °C (14 °F to 122 °F), Includes:, Integrated Sight Glass Level Indicator, Pressure Gauge, Relief / Drain Connections, Vertical Tank Design, *Recently Removed ...more
Masterwood DOOR-LINE, CNC Feed Through Door Line Boring Mach., Perimeter security grid, (2) Motorized In-feed belts, 2008
Ex-Factory | Charlotte, NC
Category: Woodworking Boring Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Masterwood
Model: DOOR LINE
Year: 2008
MASTERWOOD DOOR LINE BORING MACH. (FEED THRU CNC DOOR LINE): -- :Automatic CNC Working Center for the milling operations of doors (for the lock, key, and handle), as well as drilling & screwing of "ANUBA" hinges. -- Machine Composition: Perimeter security grid: (2) Motorized Infeed belts; separate electric cabinet ...more
10000 gallon Stainless steel tank, 126" dia. x 192" straight side, dished top, flat bottom
Perry Videx LLC | Hainesport, NJ
Category: Stainless Steel Tanks and Vessels
Seller: Perry Videx LLC
Location: Hainesport, NJ
Used Approximately 10,000 Gallon Stainless Steel Tank, Capacity: 10,000 gallons, Dimensions: 126" dia. X 192" straight side, Dished top, flat bottom, _UNKNOWN_ 10,000 Gallon, Capacity. 10,000 gal, Diameter. 10.5', Height. 16', Type of stainless. Stainless Steel, Type Of Heads. Dished top, Flat bottom ...more
