Buy or Sell Your Circular Cold Saw Machine

HOLZMA HPP-11-32 OPTIMAT FRONT LOAD PANEL SAW: & s: 3,200 mm (126") Cutting length & pull-back behind the cutting line; 125 mm (4.9") saw blade projection; 30 HP (22.3 kW) main & 3 HP (2.2 kW) scoring motor. -- Variable saw carriage travel speed from 0 - 410 FPM (0 - 125 MPM), constant return of 410 FPM ...more

CAM-WOOD SET-410-SHJJB 49" Double End Tenoner with Sanding(10) Heads Double End Tenoner with Scoring, Hogging, Jump cop, Cope and Belt sandings: -- The automatic high-speed through feed device allows for perfect finishing at speeds ranging from 20 - 52 FPM. -- Suitable for mass production in woodworking factory for ...more

230 Volts DC, 76.1 Amps Cold, Weight: 7960 Lbs, 75% Duty Cycle.

2006 used KMT C 360 SA semi-automatic vertical column cold saw with 6' Tigerstop. s include 370mm blade, dual-speed 4 HP motor, mitering up to 60 degrees, manual clamping, and chip and coolant trays. Ideal for precise cuts., Brand: Kalamazoo Machine Tool, Model: C 360 SA, Round capacity: 4-1/2" @ 90 degrees ...more

KALAMAZOO K12-14MS 14 INCH ABRASIVE METALLURGICAL CUTOFF SAW, New, The K12-14 14 inch metallurgical saw is piece of equipment that’s designed for metallurgical laboratories and other manufacturing facilities that need to slice through sections of metal samples, such as coupons, to inspect their internal ...more

Everett 1416 Abrasive Saw #7433 #1, Wheel: 14 16, Capacity:, Solid: 2, (Most) Shapes: 5, Arbor Shaft: 1, Dry Cutting Speeds (Avg.):, Angle Iron: 1 in 2 Sec. 2 in 4 Sec., Cold Roll, Solid: 2 in 7 Sec., Pipe: 1 1/2 in 3 Sec..

AIR INLET PRECLEANER, TURBINE, ANTIFREEZE, -34C (-29F), AXLE OIL COOLER READY, ED, AXLES, MAN/OPEN JSTK, CAB, DELUXE, STRG JOYSTICK, COOLING CORES, 9FPI, COUNTERWEIGHT, AUXILIARY, FAN, STANDARD, FENDERS, FRONT W/REAR EXTN, FILTRATION, STANDARD, GUARD, POWERTRAIN, HYDRAULIC OIL, STANDARD, HYDRAULICS, 2V RC, 3/4V READY ...more

PEDRAZZOLI MITER CUT-OFF SAW, MODEL: HB 425 AP 1500, CUTTING CAPACITY @ 90 DEG:, ROUND: 5.6" (142 MM), SQUARE: 5.0" (125 MM), MAX STRAIGHT CUTS: 8.7" (220 MM), MAX ANGLED CUTS: 8.7" (220 MM), MAX FEED LENGTH, MULTIPLE STEPS: 394" (9999 MM), ANGLE RANGE, AUTOMATIC MODE: 45-90-135, MANUAL MODE: ...more

Generator, Cold Weather kit, Drive - 4 Wheel, Engine Type - Diesel, Steering - 2 Wheel.

Saw Pivot Style, Horizontal Band Saw Saw Capacity 18" W x 15" H or 20" W x 10" H (16" Square 16" Round) Arm Lift Powered from control console. Blade Size 1-1/2 x 170 x.050 THK Blade Drive 10 HP, 220V (40 amps)/3PH or 440V (20 amps)/3PH Electrical Motor Requirement. 220V or 440V AC to be specified by the customer at ...more

Make: Alliance Tech, Model: ITM-850LMGA(RF), Year: 2018, Machine Location: Upon Request, Round Capacity: 34.46″, Square Capacity: 34.46″ X 34.46″, Cutting Speed (SFM): 65–262, Blade Size: 30’4″ x 2.5″ x 0.63″, Saw Motor: 12.5/15 HP, Hydraulic Tank Capacity: 26.5 Gal ...more

Discover the BEHRINGER HBE-411A, a 2021 dual column horizontal bandsaw. With a 16.1" round capacity, 225.6" blade, and a servo downfeed system, it's equipped for precision. Compact design, weighs 7,054 lbs, and s a chip conveyor system. Ideal for any shop., Brand: Behringer, Model: HBE 411A, Round capacity: 16.1" ...more

For sale: 2021 BEHRINGER HBE-261A horizontal dual-column band saw. Notable s include a sensitive cutting pressure control, automatic guide arm, and touch screen control. Round capacity of 10.2" and rectangular up to 11.8" x 10.2"., Brand: Behringer, Model: HBE 261A, Round capacity: 10.2", Rectangular capacity: 11.8" x ...more

Lico Rip System with 5-Moving Blades, Includes: Infeed, tilt hoist, unscrambler, Lico infeed, 125 HP gang, outfeed tunnel, 75' sort chain, Lateral Scanners, High speed roller gang with (5) shifting blades: Up to 500 FPM, Two Scanmeg scanners, Singulating infeed, Saw infeed fence, Hogging blade to remove inside ...more

28” x 30" Band Saw with Siemens Saw Control with Touch Screen Display Work Light Hydraulic Band Tension Automatic Guide Arm Setting Automatic Feed Control with Programmable Feed Rates Variable Vise Pressure Control - Set of 2 Power-Driven Band Brush Chain Chip Conveyor with Large Pan Automatic Retraction of ...more

47” x 55" Band Saw with Siemens Saw Control Work Light Hydraulic Band Tension Automatic Guide Arm Setting Automatic Feed Control with Programmable Feed Rates Variable Vise Pressure Control - Set of 2 Power-Driven Band Brush Complimentary DoALL Cutting Fluids Package One (1) DoALL Bi-Metal Saw Blade Instruction ...more

Good Working Order, Powered Head.

SELCO WNAR 600 ANGULAR PANEL SAW SYSTEM W/ROTATING STATION + ESSE 2 RT-LIFT-2 STACKING SYSTEM: -- : 169.3" (4,300 mm) Rip cap., 86" (2,200 mm) crosscut cap.; 4.8" (122 mm) max. saw blade projection. -- Rip Cut & Crosscut Saws:Each section with its own 20 HP (15 kW) main saw motor, 18.9" (480 mm) dia. main blade; 3 ...more

Stock #: 121240016, Location: MI, Brand: MetlSaw, Model: CS2-T12, Cutting Width: 24", Cutting Height: 8"-14", Backgauge Length: 12', Cut Length Range: 1/2"- Unlimited, Position Tolerance: \u00b1.003", Vertical Squareness: \u00b1.0005" /in thick, Horizontal Squareness: \u00b1.002 /ft ...more

MANVILLE 3/8'' C375 COLD HEADER; 480V, 3-PHASE, 1970, AIR CLUTCH AND BRAKE, Machine Type.Cold Headers Manufacturer.MANVILLE Model.C375 Year.1970 Condition.Excellent.

CAM-WOOD IAT 620-150H INVERTER DRIVEN FINGER JOINT SYSTEM 3" X 6":Lay-Up and Block-Staging Infeed Conveyor: -- 24" Wide x 31.5" long belt conveyor powered with 1/2 HP motors. Conveyor is controlled by the operating and system. Feeds at a constant rate of 180 FPM. Block delivery is controlled by the operator and ...more

18" MSC VERTICAL BAND SAW MODEL: 09514639, S/N: 2146721 :THROAT,… BAND TO COLUMN. 18" MAXIMUM WORK HEIGHT. 10" BAND WIDTH CAPACITY. 1/8" - 5/8" SAW BAND LENGTH. 140" BAND SPEED RANGE VARIABLE. 82 TO″84 FPMTABLE SIZE. 20" X 22" TABLE TILTS. 15 DEGREES LEFT, 15 ...more

DEWALT - 35 Series Super Duty,.22" Radial Arm Saw: -- 7.5 HP TEFC Saw motor; 22" dia. blade; 52" long arm; 1" x 3-1/8" saw arbor; 7" thickness cap. @ 90; 26" crosscut cap.; 40" rip cap. -- Complete with: -- Blade guard, magnetic starter, stand, and carriage return mechanism. -- Optional: -- VFD brake ($ 1,500).

GEA plate-type heat exchanger with stainless steel plates, includes (637) 304 stainless steel plates, 9,910 square feet of surface area, 10" diameter inlets & outlets. Rated for up to 350 GPM, 52.7 cubic-feet volume, 150 PSI on hot side and cold side, 32 degrees Fahrenheit to 230 degrees Fahrenheit. Hot side - 185 ...more

used cds air traveling up-cut profile saw, model cts 4.5-8. unit rated for 8" wide 3.5" high profiles, 4.5" high x 4" wide profiles, and 4.5" od pipe. 14" diameter saw blade. tag on unit reads saw motor keeps tripping electrical breaker".

ISELI Type AM, For sharpening cold saw A, B, and C grinds and parrot tooth friction blades. Also, woodworking circular saw blades, machine hacksaws, metal and wood-working band saw blades Suitable for straight and bevel cut., Automatic sharpening of the raker and finishing tooth in one operation., For saw blades 250mm ...more

ITALMAC REVERSE 9000 Twin Head Double Miter Saw For Window Profile Fabrication - 9 Meter (30')CNC double-head miter saw with automatic right head movable by numeric control. Internal/external pneumatic tilting of both heads to -45, 90 & 135 with mechanical stops for intermediate degrees. Software to manage ...more

HOLZ-HER CUT 85 FRONT LOAD, AUTOMATIC PANEL SAW: -- :4,250 mm (167") Max. rip cut cap., 3,800 mm (149") pull back pusher stroke; 97 mm (3.8") saw blade projection.15 HP (11 kW) Main saw motor, 3 HP (2.2 kW) scoring motor. -- Saw Carriage:Variable feed speed from 3 - 328 FPM (1 - 100 MPM ), return speed of 328 FPM (100 ...more

Vollmer CNS Type, Saw Sharpening Machine, For straight and alternate bevel grinding of circular saws, with diameters of 1-9/16" to 40" (40 to 1000mm) and center hole diameters of 3/8" to 6-5/16" (10 to 160mm)., Grinding wheel diameter: 6" (150 mm), Grinding wheel centerhole: 32mm, Tooth pitch: ...more

Kasto 14” x 14” Fully Automatic Horizontal Saw, Model HBA 360 AU, Serial # 601611021, Asset # 15543, Cutting Capacity – Round 14”, Cutting Capacity – Square 14” x 14”, Minimum Rest Piece Length, Automatic 3.15”, Single Cut.40”, Shortest Cut off Length.24” ...more

Northtech NT-SPS12 Sliding Table Saw Main Motor: 7.5HP Main Saw Blade Diameter Max: 14" Main Saw Blade Bore: 30mm Max Cutting Height with Blade at 90 Degrees: 102mm (4") Max Cutting Height with Blade at 45 Degrees: 70mm (2.7mm) Main Saw Blade Speed: 3,000/4,000/5,000/6,000 RPM Scoring Saw Blade: 120mm (4.7") Scoring ...more

CANTEK D405A 10' Sliding Table Saw: -- Max. cutting length 126". -- Max. depth of cut: 4.13" at 90 (355 mm), 5.12" at 90 (400 mm), 2.75" at 45 (355 mm). -- Main saw: 7-1/2 HP Motor, Blade dia. 16", Arbor dia. 30 mm (1.18"), Arbor tilt 0 - 45, & Blade speeds 3,000, 4,000, & 5,000 RPM. -- Scoring saw: 1 HP - ...more

AIR INLET PRECLEANER, TURBINE, ANTIFREEZE, -34C (-29F), AUTODIG SOFTWARE, AXLES, OPEN/OPEN, ED, AOC, CAB TRIM, PREMIUM PLUS (LHD), COOLING CORES, 9 FPI, COUNTERWEIGHT, AGGREGATE, CPM PAYLOAD SOFTWARE, FAN, STANDARD, FENDERS, BASIC +, FILTRATION, STANDARD, FUEL TANK, FAST FILL READY, GUARD, CRANKCASE, GUARD ...more

, Blade Motor 10 HP, Blade Speed 56 - 225 RPM, Blade 11.22" x 1.57" x.079", Cut-off Length.394" - 236.22", End Trimming Length.394" - 1.57", Horizontal Clamping Pressure 3417 LBS, Machine Dimensions (W x L x H) 65.6" x 82.7" x 62.3", Machine Weight 4409 LBS, Material Length.394" - 472.44", Rectangular Material Edge ...more

Make: Elumatec, Model: DG142+E555/1, Year: 2014, Machine Location: North Carolina, Minimum Cutting Length: 15″, Maximum Cutting Length: 236″, Tilting Range Inwards: 90° – 45°, Saw Blade Diameter: 20″, Saw Blade Speed: 2,300 Rpm, Power Supply: 230/400 V, 3~, 50 Hz, Power Output Per ...more

used- holzma model hpp11/38 saw. successful model/ frequently produced beam saw with 125 mm saw blade projection and in the version hpp with front loading. cutting lengths 1300 mm (as crosscut saw) up to 5600 mm. saw carriage feed 0.120 m/min, rack and pinion drive.

used- alfa laval thermal horizontal spiral heat exchanger, 2400 square feet, model 1-h. 316 stainless steel product contact areas. hot and cold side rated 125 psi at 250 degrees f. carbon steel removable heads with 316 stainless steel clad. openings (4) 4". mounted on carbon steel saddles. national board# 13862 ...more

LHI MBR-10 ROLL FEED GANG RIPSAW: Saw arbor with 25 HP arbor motor (30 HP and 40 HP available, see Options for pricing).: -- 1-15/16" Saw arbor bearings and 10" usable arbor. 12" useable arbor available. Uses 12" dia. x 1-3/4" bore saw blades. -- 1/8" to 2" Max. cutting depth on hardwoods and softwoods; 18" minimum ...more

19' 8” X 8.66 Tube Cutting Fiber Laser with FastCut CNC Control, Tube Pro Nesting Software, Air Blower, Transformer for 3,000 Watt Fiber Laser, Two Year Warranty, Installation and Training., Max Loading Length: 98.42” ~ 236” Auto Length DetectionCircular Tube Cutting Diameter Range:.5” - ...more

Make: Pontotoc, Model: PKG-565, Year: 1900, Machine Location: North Carolina, Equipment Overview, The Pontotoc PKG-565 is a heavy-duty vertical foam cutting bandsaw designed for slicing expanded and rigid foam blocks. Featuring a wide steel frame, stable dual-table work area, and 480V industrial drive, this unit is ...more

15HP, 480 volt, 14” saw blade, Variable speed control for infeed chain ( VFD), Rooftop grooved feed chain 8 ¼” wide, Table dimensions: 80” x 57”, Serial # 65M1297570, Test run video and additional photos available.

WF Wells Model W-9 Horizontal Saw, Asset # 17099, Serial #W985366, Capacity: Rectangular at 90deg. 9″ High x 17″ Wide, Round at 90deg. 9″ Dia., Rectangular at 45deg. 9″ High X 8″ Wide, Round at 45deg. 8″ Dia., Weight Capacity: 2,000 lbs, Blade Speed: 70-380 SFPM, Blade Size: ...more

CAM-WOOD TYPE F1, MODEL FAH, 6"; X 20’ Horizontal Fully Automatic Finger Joint System Single Chain TypeMECHANICAL FOR THE FEED SYSTEM: -- Operating speed: 120 to 150 lugs/Min -- Intermittent feed motor: 2 HP + 1:25 -- Feed chain motor: 30 HP (20 kW) Servo Drive (C2) MECHANICAL : RIGHT-SIDE SHAPER: -- Cutterhead ...more

Our new cold saws are offered in both single and double-blade versions, accommodating sizes of up to 273 mm maximum outer diameter. With cutting speeds reaching up to 300 feet per minute (FPM), each saw is UCG’s advanced closed-loop measuring system. This technology enables precise batch control and ensures ...more

*CHASSIS AR, *ELECTRONICS AR, *HYDRAULIC AR, *INSTALLATION AR, *POWER TRAIN AR, AUX ECM, CAB, DELUXE, CTWT, STANDARD, 763LBS, 2 PCS, DIFFERENTIAL, OPEN REAR, Engine, ENVIRONMENT, STANDARD, FENDERS, STANDARD, GUARD, POWERTRAIN, LOWER, HYDRAULIC OIL, STANDARD, HYDRAULICS, 3V, CPLR READY, SL, HYDRAULICS, STANDARD, SL ...more

SCM SI 350 N - 10-1/2',.Sliding Table Saw: -- Cutting length 3,200 mm (126"); max. depth of cut: 118 mm (4.65") at 90; 81 mm (3.19") at 45. -- Main saw: 6.6 kW (9 HP) Motor; blade dia. 250 - 350 mm (9.84" - 13.78"); arbor dia. 1"; arbor tilt 0 - 45; blade speed 4,000 RPM. -- Scoring saw: 0.75 kW (1 HP) Motor; max. ...more

SAFETY SPEED MANUFACTURING SR-5U Panel Saw and Router Combination: -- 10' Steel welded frame; 3.25 HP, 15 amp industrial duty saw motor; 3-1/4 HP, 11 amp Industrial duty router motor. -- 8" Blade cap. with 1-3/4" max. material thickness. -- 62" Crosscut (vertical position) with spring-loaded counterbalance system. ...more